1 files changed, 249 insertions, 0 deletions
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
new file mode 100644
index 0000000..6ad3dd8
--- /dev/null
+++ b/board/ti/ti814x/evm.c
@@ -0,0 +1,249 @@
+/*
+ * evm.c
+ *
+ * Board functions for TI814x EVM
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <cpsw.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include "evm.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPL_BUILD
+static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+#endif
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* UART Defines */
+#ifdef CONFIG_SPL_BUILD
+static void uart_enable(void)
+{
+	/* UART softreset */
+	uart_soft_reset();
+}
+
+static void wdt_disable(void)
+{
+	writel(0xAAAA, &wdtimer->wdtwspr);
+	while (readl(&wdtimer->wdtwwps) != 0x0)
+		;
+	writel(0x5555, &wdtimer->wdtwspr);
+	while (readl(&wdtimer->wdtwwps) != 0x0)
+		;
+}
+
+static const struct cmd_control evm_ddr2_cctrl_data = {
+	.cmd0csratio	= 0x80,
+	.cmd0dldiff	= 0x04,
+	.cmd0iclkout	= 0x00,
+
+	.cmd1csratio	= 0x80,
+	.cmd1dldiff	= 0x04,
+	.cmd1iclkout	= 0x00,
+
+	.cmd2csratio	= 0x80,
+	.cmd2dldiff	= 0x04,
+	.cmd2iclkout	= 0x00,
+};
+
+static const struct emif_regs evm_ddr2_emif0_regs = {
+	.sdram_config			= 0x40801ab2,
+	.ref_ctrl			= 0x10000c30,
+	.sdram_tim1			= 0x0aaaf552,
+	.sdram_tim2			= 0x043631d2,
+	.sdram_tim3			= 0x00000327,
+	.emif_ddr_phy_ctlr_1		= 0x00000007
+};
+
+static const struct emif_regs evm_ddr2_emif1_regs = {
+	.sdram_config			= 0x40801ab2,
+	.ref_ctrl			= 0x10000c30,
+	.sdram_tim1			= 0x0aaaf552,
+	.sdram_tim2			= 0x043631d2,
+	.sdram_tim3			= 0x00000327,
+	.emif_ddr_phy_ctlr_1		= 0x00000007
+};
+
+const struct dmm_lisa_map_regs evm_lisa_map_regs = {
+	.dmm_lisa_map_0			= 0x00000000,
+	.dmm_lisa_map_1			= 0x00000000,
+	.dmm_lisa_map_2			= 0x806c0300,
+	.dmm_lisa_map_3			= 0x806c0300,
+};
+
+static const struct ddr_data evm_ddr2_data = {
+	.datardsratio0		= ((0x35<<10) | (0x35<<0)),
+	.datawdsratio0		= ((0x20<<10) | (0x20<<0)),
+	.datawiratio0		= ((0<<10) | (0<<0)),
+	.datagiratio0		= ((0<<10) | (0<<0)),
+	.datafwsratio0		= ((0x90<<10) | (0x90<<0)),
+	.datawrsratio0		= ((0x50<<10) | (0x50<<0)),
+	.datauserank0delay	= 1,
+	.datadldiff0		= 0x4,
+};
+#endif
+
+/*
+ * early system init of muxing and clocks.
+ */
+void s_init(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	/*
+	 * Save the boot parameters passed from romcode.
+	 * We cannot delay the saving further than this,
+	 * to prevent overwrites.
+	 */
+#ifdef CONFIG_SPL_BUILD
+	save_omap_boot_params();
+#endif
+
+	/* WDT1 is already running when the bootloader gets control
+	 * Disable it to avoid "random" resets
+	 */
+	wdt_disable();
+
+	/* Enable timer */
+	timer_init();
+
+	/* Setup the PLLs and the clocks for the peripherals */
+	pll_init();
+
+	/* Enable RTC32K clock */
+	rtc32k_enable();
+
+	/* Set UART pins */
+	enable_uart0_pin_mux();
+
+	/* Set MMC pins */
+	enable_mmc1_pin_mux();
+
+	/* Set Ethernet pins */
+	enable_enet_pin_mux();
+
+	/* Enable UART */
+	uart_enable();
+
+	gd = &gdata;
+
+	preloader_console_init();
+
+	config_dmm(&evm_lisa_map_regs);
+
+	config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data,
+		   &evm_ddr2_emif0_regs, 0);
+	config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data,
+		   &evm_ddr2_emif1_regs, 1);
+#endif
+}
+
+/*
+ * Basic board specific setup.  Pinmux has been handled already.
+ */
+int board_init(void)
+{
+	gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+	return 0;
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+	omap_mmc_init(1, 0, 0, -1, -1);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+
+	return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+	{
+		.slave_reg_ofs	= 0x50,
+		.sliver_reg_ofs	= 0x700,
+		.phy_id		= 1,
+	},
+	{
+		.slave_reg_ofs	= 0x90,
+		.sliver_reg_ofs	= 0x740,
+		.phy_id		= 0,
+	},
+};
+
+static struct cpsw_platform_data cpsw_data = {
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x100,
+	.slaves			= 1,
+	.slave_data		= cpsw_slaves,
+	.ale_reg_ofs		= 0x600,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x28,
+	.hw_stats_reg_ofs	= 0x400,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_1,
+};
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	uint8_t mac_addr[6];
+	uint32_t mac_hi, mac_lo;
+
+	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+		printf("<ethaddr> not set. Reading from E-fuse\n");
+		/* try reading mac address from efuse */
+		mac_lo = readl(&cdev->macid0l);
+		mac_hi = readl(&cdev->macid0h);
+		mac_addr[0] = mac_hi & 0xFF;
+		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+		mac_addr[4] = mac_lo & 0xFF;
+		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+		if (is_valid_ether_addr(mac_addr))
+			eth_setenv_enetaddr("ethaddr", mac_addr);
+		else
+			printf("Unable to read MAC address. Set <ethaddr>\n");
+	}
+
+	return cpsw_register(&cpsw_data);
+}