diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs/mxs')
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/Makefile | 60 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/clock.c | 452 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/iomux.c | 109 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/mxs.c | 315 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/mxs_init.h | 45 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 150 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c | 86 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 347 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 963 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/start.S | 209 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/timer.c | 175 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 18 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd | 14 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 77 |
14 files changed, 3020 insertions, 0 deletions
diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile new file mode 100644 index 0000000..038c1c1 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/Makefile @@ -0,0 +1,60 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS = clock.o mxs.o iomux.o timer.o + +ifdef CONFIG_SPL_BUILD +COBJS += spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o +endif + +SRCS := $(START:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +# Specify the target for use in elftosb call +ELFTOSB_TARGET-$(CONFIG_MX23) = imx23 +ELFTOSB_TARGET-$(CONFIG_MX28) = imx28 + +$(OBJTREE)/u-boot.bd: $(SRCTREE)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd + sed "s@OBJTREE@$(OBJTREE)@g" $^ > $@ + +$(OBJTREE)/u-boot.sb: $(OBJTREE)/u-boot.bin $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/u-boot.bd + elftosb -zf $(ELFTOSB_TARGET-y) -c $(OBJTREE)/u-boot.bd -o $(OBJTREE)/u-boot.sb + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c new file mode 100644 index 0000000..f94107f --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/clock.c @@ -0,0 +1,452 @@ +/* + * Freescale i.MX23/i.MX28 clock setup code + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> + +/* + * The PLL frequency is 480MHz and XTAL frequency is 24MHz + * iMX23: datasheet section 4.2 + * iMX28: datasheet section 10.2 + */ +#define PLL_FREQ_KHZ 480000 +#define PLL_FREQ_COEF 18 +#define XTAL_FREQ_KHZ 24000 + +#define PLL_FREQ_MHZ (PLL_FREQ_KHZ / 1000) +#define XTAL_FREQ_MHZ (XTAL_FREQ_KHZ / 1000) + +#if defined(CONFIG_MX23) +#define MXC_SSPCLK_MAX MXC_SSPCLK0 +#elif defined(CONFIG_MX28) +#define MXC_SSPCLK_MAX MXC_SSPCLK3 +#endif + +static uint32_t mxs_get_pclk(void) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + + uint32_t clkctrl, clkseq, div; + uint8_t clkfrac, frac; + + clkctrl = readl(&clkctrl_regs->hw_clkctrl_cpu); + + /* No support of fractional divider calculation */ + if (clkctrl & + (CLKCTRL_CPU_DIV_XTAL_FRAC_EN | CLKCTRL_CPU_DIV_CPU_FRAC_EN)) { + return 0; + } + + clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq); + + /* XTAL Path */ + if (clkseq & CLKCTRL_CLKSEQ_BYPASS_CPU) { + div = (clkctrl & CLKCTRL_CPU_DIV_XTAL_MASK) >> + CLKCTRL_CPU_DIV_XTAL_OFFSET; + return XTAL_FREQ_MHZ / div; + } + + /* REF Path */ + clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]); + frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK; + div = clkctrl & CLKCTRL_CPU_DIV_CPU_MASK; + return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div; +} + +static uint32_t mxs_get_hclk(void) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + + uint32_t div; + uint32_t clkctrl; + + clkctrl = readl(&clkctrl_regs->hw_clkctrl_hbus); + + /* No support of fractional divider calculation */ + if (clkctrl & CLKCTRL_HBUS_DIV_FRAC_EN) + return 0; + + div = clkctrl & CLKCTRL_HBUS_DIV_MASK; + return mxs_get_pclk() / div; +} + +static uint32_t mxs_get_emiclk(void) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + + uint32_t clkctrl, clkseq, div; + uint8_t clkfrac, frac; + + clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq); + clkctrl = readl(&clkctrl_regs->hw_clkctrl_emi); + + /* XTAL Path */ + if (clkseq & CLKCTRL_CLKSEQ_BYPASS_EMI) { + div = (clkctrl & CLKCTRL_EMI_DIV_XTAL_MASK) >> + CLKCTRL_EMI_DIV_XTAL_OFFSET; + return XTAL_FREQ_MHZ / div; + } + + /* REF Path */ + clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_EMI]); + frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK; + div = clkctrl & CLKCTRL_EMI_DIV_EMI_MASK; + return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div; +} + +static uint32_t mxs_get_gpmiclk(void) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; +#if defined(CONFIG_MX23) + uint8_t *reg = + &clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]; +#elif defined(CONFIG_MX28) + uint8_t *reg = + &clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_GPMI]; +#endif + uint32_t clkctrl, clkseq, div; + uint8_t clkfrac, frac; + + clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq); + clkctrl = readl(&clkctrl_regs->hw_clkctrl_gpmi); + + /* XTAL Path */ + if (clkseq & CLKCTRL_CLKSEQ_BYPASS_GPMI) { + div = clkctrl & CLKCTRL_GPMI_DIV_MASK; + return XTAL_FREQ_MHZ / div; + } + + /* REF Path */ + clkfrac = readb(reg); + frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK; + div = clkctrl & CLKCTRL_GPMI_DIV_MASK; + return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div; +} + +/* + * Set IO clock frequency, in kHz + */ +void mxs_set_ioclk(enum mxs_ioclock io, uint32_t freq) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t div; + int io_reg; + + if (freq == 0) + return; + + if ((io < MXC_IOCLK0) || (io > MXC_IOCLK1)) + return; + + div = (PLL_FREQ_KHZ * PLL_FREQ_COEF) / freq; + + if (div < 18) + div = 18; + + if (div > 35) + div = 35; + + io_reg = CLKCTRL_FRAC0_IO0 - io; /* Register order is reversed */ + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac0_set[io_reg]); + writeb(CLKCTRL_FRAC_CLKGATE | (div & CLKCTRL_FRAC_FRAC_MASK), + &clkctrl_regs->hw_clkctrl_frac0[io_reg]); + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac0_clr[io_reg]); +} + +/* + * Get IO clock, returns IO clock in kHz + */ +static uint32_t mxs_get_ioclk(enum mxs_ioclock io) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint8_t ret; + int io_reg; + + if ((io < MXC_IOCLK0) || (io > MXC_IOCLK1)) + return 0; + + io_reg = CLKCTRL_FRAC0_IO0 - io; /* Register order is reversed */ + + ret = readb(&clkctrl_regs->hw_clkctrl_frac0[io_reg]) & + CLKCTRL_FRAC_FRAC_MASK; + + return (PLL_FREQ_KHZ * PLL_FREQ_COEF) / ret; +} + +/* + * Configure SSP clock frequency, in kHz + */ +void mxs_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t clk, clkreg; + + if (ssp > MXC_SSPCLK_MAX) + return; + + clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + + (ssp * sizeof(struct mxs_register_32)); + + clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE); + while (readl(clkreg) & CLKCTRL_SSP_CLKGATE) + ; + + if (xtal) + clk = XTAL_FREQ_KHZ; + else + clk = mxs_get_ioclk(ssp >> 1); + + if (freq > clk) + return; + + /* Calculate the divider and cap it if necessary */ + clk /= freq; + if (clk > CLKCTRL_SSP_DIV_MASK) + clk = CLKCTRL_SSP_DIV_MASK; + + clrsetbits_le32(clkreg, CLKCTRL_SSP_DIV_MASK, clk); + while (readl(clkreg) & CLKCTRL_SSP_BUSY) + ; + + if (xtal) + writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp, + &clkctrl_regs->hw_clkctrl_clkseq_set); + else + writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp, + &clkctrl_regs->hw_clkctrl_clkseq_clr); +} + +/* + * Return SSP frequency, in kHz + */ +static uint32_t mxs_get_sspclk(enum mxs_sspclock ssp) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t clkreg; + uint32_t clk, tmp; + + if (ssp > MXC_SSPCLK_MAX) + return 0; + + tmp = readl(&clkctrl_regs->hw_clkctrl_clkseq); + if (tmp & (CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp)) + return XTAL_FREQ_KHZ; + + clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + + (ssp * sizeof(struct mxs_register_32)); + + tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK; + + if (tmp == 0) + return 0; + + clk = mxs_get_ioclk(ssp >> 1); + + return clk / tmp; +} + +/* + * Set SSP/MMC bus frequency, in kHz) + */ +void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq) +{ + struct mxs_ssp_regs *ssp_regs; + const enum mxs_sspclock clk = mxs_ssp_clock_by_bus(bus); + const uint32_t sspclk = mxs_get_sspclk(clk); + uint32_t reg; + uint32_t divide, rate, tgtclk; + + ssp_regs = mxs_ssp_regs_by_bus(bus); + + /* + * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)), + * CLOCK_DIVIDE has to be an even value from 2 to 254, and + * CLOCK_RATE could be any integer from 0 to 255. + */ + for (divide = 2; divide < 254; divide += 2) { + rate = sspclk / freq / divide; + if (rate <= 256) + break; + } + + tgtclk = sspclk / divide / rate; + while (tgtclk > freq) { + rate++; + tgtclk = sspclk / divide / rate; + } + if (rate > 256) + rate = 256; + + /* Always set timeout the maximum */ + reg = SSP_TIMING_TIMEOUT_MASK | + (divide << SSP_TIMING_CLOCK_DIVIDE_OFFSET) | + ((rate - 1) << SSP_TIMING_CLOCK_RATE_OFFSET); + writel(reg, &ssp_regs->hw_ssp_timing); + + debug("SPI%d: Set freq rate to %d KHz (requested %d KHz)\n", + bus, tgtclk, freq); +} + +void mxs_set_lcdclk(uint32_t freq) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t fp, x, k_rest, k_best, x_best, tk; + int32_t k_best_l = 999, k_best_t = 0, x_best_l = 0xff, x_best_t = 0xff; + + if (freq == 0) + return; + +#if defined(CONFIG_MX23) + writel(CLKCTRL_CLKSEQ_BYPASS_PIX, &clkctrl_regs->hw_clkctrl_clkseq_clr); +#elif defined(CONFIG_MX28) + writel(CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF, &clkctrl_regs->hw_clkctrl_clkseq_clr); +#endif + + /* + * / 18 \ 1 1 + * freq kHz = | 480000000 Hz * -- | * --- * ------ + * \ x / k 1000 + * + * 480000000 Hz 18 + * ------------ * -- + * freq kHz x + * k = ------------------- + * 1000 + */ + + fp = ((PLL_FREQ_KHZ * 1000) / freq) * 18; + + for (x = 18; x <= 35; x++) { + tk = fp / x; + if ((tk / 1000 == 0) || (tk / 1000 > 255)) + continue; + + k_rest = tk % 1000; + + if (k_rest < (k_best_l % 1000)) { + k_best_l = tk; + x_best_l = x; + } + + if (k_rest > (k_best_t % 1000)) { + k_best_t = tk; + x_best_t = x; + } + } + + if (1000 - (k_best_t % 1000) > (k_best_l % 1000)) { + k_best = k_best_l; + x_best = x_best_l; + } else { + k_best = k_best_t; + x_best = x_best_t; + } + + k_best /= 1000; + +#if defined(CONFIG_MX23) + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_PIX]); + writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK), + &clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_PIX]); + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_PIX]); + + writel(CLKCTRL_PIX_CLKGATE, + &clkctrl_regs->hw_clkctrl_pix_set); + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_pix, + CLKCTRL_PIX_DIV_MASK | CLKCTRL_PIX_CLKGATE, + k_best << CLKCTRL_PIX_DIV_OFFSET); + + while (readl(&clkctrl_regs->hw_clkctrl_pix) & CLKCTRL_PIX_BUSY) + ; +#elif defined(CONFIG_MX28) + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac1_set[CLKCTRL_FRAC1_PIX]); + writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK), + &clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_PIX]); + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac1_clr[CLKCTRL_FRAC1_PIX]); + + writel(CLKCTRL_DIS_LCDIF_CLKGATE, + &clkctrl_regs->hw_clkctrl_lcdif_set); + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_lcdif, + CLKCTRL_DIS_LCDIF_DIV_MASK | CLKCTRL_DIS_LCDIF_CLKGATE, + k_best << CLKCTRL_DIS_LCDIF_DIV_OFFSET); + + while (readl(&clkctrl_regs->hw_clkctrl_lcdif) & CLKCTRL_DIS_LCDIF_BUSY) + ; +#endif +} + +uint32_t mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return mxs_get_pclk() * 1000000; + case MXC_GPMI_CLK: + return mxs_get_gpmiclk() * 1000000; + case MXC_AHB_CLK: + case MXC_IPG_CLK: + return mxs_get_hclk() * 1000000; + case MXC_EMI_CLK: + return mxs_get_emiclk(); + case MXC_IO0_CLK: + return mxs_get_ioclk(MXC_IOCLK0); + case MXC_IO1_CLK: + return mxs_get_ioclk(MXC_IOCLK1); + case MXC_XTAL_CLK: + return XTAL_FREQ_KHZ * 1000; + case MXC_SSP0_CLK: + return mxs_get_sspclk(MXC_SSPCLK0); +#ifdef CONFIG_MX28 + case MXC_SSP1_CLK: + return mxs_get_sspclk(MXC_SSPCLK1); + case MXC_SSP2_CLK: + return mxs_get_sspclk(MXC_SSPCLK2); + case MXC_SSP3_CLK: + return mxs_get_sspclk(MXC_SSPCLK3); +#endif + } + + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/mxs/iomux.c b/arch/arm/cpu/arm926ejs/mxs/iomux.c new file mode 100644 index 0000000..73f1446 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/iomux.c @@ -0,0 +1,109 @@ +/* + * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/iomux.h> +#include <asm/arch/imx-regs.h> + +#if defined(CONFIG_MX23) +#define DRIVE_OFFSET 0x200 +#define PULL_OFFSET 0x400 +#elif defined(CONFIG_MX28) +#define DRIVE_OFFSET 0x300 +#define PULL_OFFSET 0x600 +#else +#error "Please select CONFIG_MX23 or CONFIG_MX28" +#endif + +/* + * configures a single pad in the iomuxer + */ +int mxs_iomux_setup_pad(iomux_cfg_t pad) +{ + u32 reg, ofs, bp, bm; + void *iomux_base = (void *)MXS_PINCTRL_BASE; + struct mxs_register_32 *mxs_reg; + + /* muxsel */ + ofs = 0x100; + ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10; + bp = PAD_PIN(pad) % 16 * 2; + bm = 0x3 << bp; + reg = readl(iomux_base + ofs); + reg &= ~bm; + reg |= PAD_MUXSEL(pad) << bp; + writel(reg, iomux_base + ofs); + + /* drive */ + ofs = DRIVE_OFFSET; + ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10; + /* mA */ + if (PAD_MA_VALID(pad)) { + bp = PAD_PIN(pad) % 8 * 4; + bm = 0x3 << bp; + reg = readl(iomux_base + ofs); + reg &= ~bm; + reg |= PAD_MA(pad) << bp; + writel(reg, iomux_base + ofs); + } + /* vol */ + if (PAD_VOL_VALID(pad)) { + bp = PAD_PIN(pad) % 8 * 4 + 2; + mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs); + if (PAD_VOL(pad)) + writel(1 << bp, &mxs_reg->reg_set); + else + writel(1 << bp, &mxs_reg->reg_clr); + } + + /* pull */ + if (PAD_PULL_VALID(pad)) { + ofs = PULL_OFFSET; + ofs += PAD_BANK(pad) * 0x10; + bp = PAD_PIN(pad); + mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs); + if (PAD_PULL(pad)) + writel(1 << bp, &mxs_reg->reg_set); + else + writel(1 << bp, &mxs_reg->reg_clr); + } + + return 0; +} + +int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count) +{ + const iomux_cfg_t *p = pad_list; + int i; + int ret; + + for (i = 0; i < count; i++) { + ret = mxs_iomux_setup_pad(*p); + if (ret) + return ret; + p++; + } + + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c new file mode 100644 index 0000000..45667bd --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c @@ -0,0 +1,315 @@ +/* + * Freescale i.MX23/i.MX28 common code + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/imx-common/dma.h> +#include <asm/arch/gpio.h> +#include <asm/arch/iomux.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> +#include <linux/compiler.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Lowlevel init isn't used on i.MX28, so just have a dummy here */ +inline void lowlevel_init(void) {} + +void reset_cpu(ulong ignored) __attribute__((noreturn)); + +void reset_cpu(ulong ignored) +{ + struct mxs_rtc_regs *rtc_regs = + (struct mxs_rtc_regs *)MXS_RTC_BASE; + struct mxs_lcdif_regs *lcdif_regs = + (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; + + /* + * Shut down the LCD controller as it interferes with BootROM boot mode + * pads sampling. + */ + writel(LCDIF_CTRL_RUN, &lcdif_regs->hw_lcdif_ctrl_clr); + + /* Wait 1 uS before doing the actual watchdog reset */ + writel(1, &rtc_regs->hw_rtc_watchdog); + writel(RTC_CTRL_WATCHDOGEN, &rtc_regs->hw_rtc_ctrl_set); + + /* Endless loop, reset will exit from here */ + for (;;) + ; +} + +void enable_caches(void) +{ +#ifndef CONFIG_SYS_ICACHE_OFF + icache_enable(); +#endif +#ifndef CONFIG_SYS_DCACHE_OFF + dcache_enable(); +#endif +} + +/* + * This function will craft a jumptable at 0x0 which will redirect interrupt + * vectoring to proper location of U-Boot in RAM. + * + * The structure of the jumptable will be as follows: + * ldr pc, [pc, #0x18] ..... for each vector, thus repeated 8 times + * <destination address> ... for each previous ldr, thus also repeated 8 times + * + * The "ldr pc, [pc, #0x18]" instruction above loads address from memory at + * offset 0x18 from current value of PC register. Note that PC is already + * incremented by 4 when computing the offset, so the effective offset is + * actually 0x20, this the associated <destination address>. Loading the PC + * register with an address performs a jump to that address. + */ +void mx28_fixup_vt(uint32_t start_addr) +{ + /* ldr pc, [pc, #0x18] */ + const uint32_t ldr_pc = 0xe59ff018; + /* Jumptable location is 0x0 */ + uint32_t *vt = (uint32_t *)0x0; + int i; + + for (i = 0; i < 8; i++) { + vt[i] = ldr_pc; + vt[i + 8] = start_addr + (4 * i); + } +} + +#ifdef CONFIG_ARCH_MISC_INIT +int arch_misc_init(void) +{ + mx28_fixup_vt(gd->relocaddr); + return 0; +} +#endif + +int arch_cpu_init(void) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + extern uint32_t _start; + + mx28_fixup_vt((uint32_t)&_start); + + /* + * Enable NAND clock + */ + /* Clear bypass bit */ + writel(CLKCTRL_CLKSEQ_BYPASS_GPMI, + &clkctrl_regs->hw_clkctrl_clkseq_set); + + /* Set GPMI clock to ref_gpmi / 12 */ + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_gpmi, + CLKCTRL_GPMI_CLKGATE | CLKCTRL_GPMI_DIV_MASK, 1); + + udelay(1000); + + /* + * Configure GPIO unit + */ + mxs_gpio_init(); + +#ifdef CONFIG_APBH_DMA + /* Start APBH DMA */ + mxs_dma_init(); +#endif + + return 0; +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +static const char *get_cpu_type(void) +{ + struct mxs_digctl_regs *digctl_regs = + (struct mxs_digctl_regs *)MXS_DIGCTL_BASE; + + switch (readl(&digctl_regs->hw_digctl_chipid) & HW_DIGCTL_CHIPID_MASK) { + case HW_DIGCTL_CHIPID_MX23: + return "23"; + case HW_DIGCTL_CHIPID_MX28: + return "28"; + default: + return "??"; + } +} + +static const char *get_cpu_rev(void) +{ + struct mxs_digctl_regs *digctl_regs = + (struct mxs_digctl_regs *)MXS_DIGCTL_BASE; + uint8_t rev = readl(&digctl_regs->hw_digctl_chipid) & 0x000000FF; + + switch (readl(&digctl_regs->hw_digctl_chipid) & HW_DIGCTL_CHIPID_MASK) { + case HW_DIGCTL_CHIPID_MX23: + switch (rev) { + case 0x0: + return "1.0"; + case 0x1: + return "1.1"; + case 0x2: + return "1.2"; + case 0x3: + return "1.3"; + case 0x4: + return "1.4"; + default: + return "??"; + } + case HW_DIGCTL_CHIPID_MX28: + switch (rev) { + case 0x1: + return "1.2"; + default: + return "??"; + } + default: + return "??"; + } +} + +int print_cpuinfo(void) +{ + struct mxs_spl_data *data = (struct mxs_spl_data *) + ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); + + printf("CPU: Freescale i.MX%s rev%s at %d MHz\n", + get_cpu_type(), + get_cpu_rev(), + mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("BOOT: %s\n", mxs_boot_modes[data->boot_mode_idx].mode); + return 0; +} +#endif + +int do_mx28_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + printf("CPU: %3d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("BUS: %3d MHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000000); + printf("EMI: %3d MHz\n", mxc_get_clock(MXC_EMI_CLK)); + printf("GPMI: %3d MHz\n", mxc_get_clock(MXC_GPMI_CLK) / 1000000); + return 0; +} + +/* + * Initializes on-chip ethernet controllers. + */ +#if defined(CONFIG_MX28) && defined(CONFIG_CMD_NET) +int cpu_eth_init(bd_t *bis) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + + /* Turn on ENET clocks */ + clrbits_le32(&clkctrl_regs->hw_clkctrl_enet, + CLKCTRL_ENET_SLEEP | CLKCTRL_ENET_DISABLE); + + /* Set up ENET PLL for 50 MHz */ + /* Power on ENET PLL */ + writel(CLKCTRL_PLL2CTRL0_POWER, + &clkctrl_regs->hw_clkctrl_pll2ctrl0_set); + + udelay(10); + + /* Gate on ENET PLL */ + writel(CLKCTRL_PLL2CTRL0_CLKGATE, + &clkctrl_regs->hw_clkctrl_pll2ctrl0_clr); + + /* Enable pad output */ + setbits_le32(&clkctrl_regs->hw_clkctrl_enet, CLKCTRL_ENET_CLK_OUT_EN); + + return 0; +} +#endif + +__weak void mx28_adjust_mac(int dev_id, unsigned char *mac) +{ + mac[0] = 0x00; + mac[1] = 0x04; /* Use FSL vendor MAC address by default */ + + if (dev_id == 1) /* Let MAC1 be MAC0 + 1 by default */ + mac[5] += 1; +} + +#ifdef CONFIG_MX28_FEC_MAC_IN_OCOTP + +#define MXS_OCOTP_MAX_TIMEOUT 1000000 +void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) +{ + struct mxs_ocotp_regs *ocotp_regs = + (struct mxs_ocotp_regs *)MXS_OCOTP_BASE; + uint32_t data; + + memset(mac, 0, 6); + + writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set); + + if (mxs_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY, + MXS_OCOTP_MAX_TIMEOUT)) { + printf("MXS FEC: Can't get MAC from OCOTP\n"); + return; + } + + data = readl(&ocotp_regs->hw_ocotp_cust0); + + mac[2] = (data >> 24) & 0xff; + mac[3] = (data >> 16) & 0xff; + mac[4] = (data >> 8) & 0xff; + mac[5] = data & 0xff; + mx28_adjust_mac(dev_id, mac); +} +#else +void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) +{ + memset(mac, 0, 6); +} +#endif + +int mxs_dram_init(void) +{ + struct mxs_spl_data *data = (struct mxs_spl_data *) + ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); + + if (data->mem_dram_size == 0) { + printf("MXS:\n" + "Error, the RAM size passed up from SPL is 0!\n"); + hang(); + } + + gd->ram_size = data->mem_dram_size; + return 0; +} + +U_BOOT_CMD( + clocks, CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks, + "display clocks", + "" +); diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs_init.h b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h new file mode 100644 index 0000000..084def5 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h @@ -0,0 +1,45 @@ +/* + * Freescale i.MX28 SPL functions + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __M28_INIT_H__ +#define __M28_INIT_H__ + +void early_delay(int delay); + +void mxs_power_init(void); + +#ifdef CONFIG_SPL_MXS_PSWITCH_WAIT +void mxs_power_wait_pswitch(void); +#else +static inline void mxs_power_wait_pswitch(void) { } +#endif + +void mxs_mem_init(void); +uint32_t mxs_mem_get_size(void); + +void mxs_lradc_init(void); +void mxs_lradc_enable_batt_measurement(void); + +#endif /* __M28_INIT_H__ */ diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c new file mode 100644 index 0000000..ed525e5 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -0,0 +1,150 @@ +/* + * Freescale i.MX28 Boot setup + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> + +#include "mxs_init.h" + +/* + * This delay function is intended to be used only in early stage of boot, where + * clock are not set up yet. The timer used here is reset on every boot and + * takes a few seconds to roll. The boot doesn't take that long, so to keep the + * code simple, it doesn't take rolling into consideration. + */ +void early_delay(int delay) +{ + struct mxs_digctl_regs *digctl_regs = + (struct mxs_digctl_regs *)MXS_DIGCTL_BASE; + + uint32_t st = readl(&digctl_regs->hw_digctl_microseconds); + st += delay; + while (st > readl(&digctl_regs->hw_digctl_microseconds)) + ; +} + +#define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) +static const iomux_cfg_t iomux_boot[] = { +#if defined(CONFIG_MX23) + MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, + MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, + MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, + MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, + MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, + MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, +#elif defined(CONFIG_MX28) + MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, + MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, +#endif +}; + +static uint8_t mxs_get_bootmode_index(void) +{ + uint8_t bootmode = 0; + int i; + uint8_t masked; + + /* Setup IOMUX of bootmode pads to GPIO */ + mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot)); + +#if defined(CONFIG_MX23) + /* Setup bootmode pins as GPIO input */ + gpio_direction_input(MX23_PAD_LCD_D00__GPIO_1_0); + gpio_direction_input(MX23_PAD_LCD_D01__GPIO_1_1); + gpio_direction_input(MX23_PAD_LCD_D02__GPIO_1_2); + gpio_direction_input(MX23_PAD_LCD_D03__GPIO_1_3); + gpio_direction_input(MX23_PAD_LCD_D05__GPIO_1_5); + + /* Read bootmode pads */ + bootmode |= (gpio_get_value(MX23_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0; + bootmode |= (gpio_get_value(MX23_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1; + bootmode |= (gpio_get_value(MX23_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2; + bootmode |= (gpio_get_value(MX23_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; + bootmode |= (gpio_get_value(MX23_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; +#elif defined(CONFIG_MX28) + /* Setup bootmode pins as GPIO input */ + gpio_direction_input(MX28_PAD_LCD_D00__GPIO_1_0); + gpio_direction_input(MX28_PAD_LCD_D01__GPIO_1_1); + gpio_direction_input(MX28_PAD_LCD_D02__GPIO_1_2); + gpio_direction_input(MX28_PAD_LCD_D03__GPIO_1_3); + gpio_direction_input(MX28_PAD_LCD_D04__GPIO_1_4); + gpio_direction_input(MX28_PAD_LCD_D05__GPIO_1_5); + + /* Read bootmode pads */ + bootmode |= (gpio_get_value(MX28_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4; + bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; +#endif + + for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) { + masked = bootmode & mxs_boot_modes[i].boot_mask; + if (masked == mxs_boot_modes[i].boot_pads) + break; + } + + return i; +} + +void mxs_common_spl_init(const iomux_cfg_t *iomux_setup, + const unsigned int iomux_size) +{ + struct mxs_spl_data *data = (struct mxs_spl_data *) + ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); + uint8_t bootmode = mxs_get_bootmode_index(); + + mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size); + mxs_power_init(); + + mxs_mem_init(); + data->mem_dram_size = mxs_mem_get_size(); + + data->boot_mode_idx = bootmode; + + mxs_power_wait_pswitch(); +} + +/* Support aparatus */ +inline void board_init_f(unsigned long bootflag) +{ + for (;;) + ; +} + +inline void board_init_r(gd_t *id, ulong dest_addr) +{ + for (;;) + ; +} diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c new file mode 100644 index 0000000..d90f0a1 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c @@ -0,0 +1,86 @@ +/* + * Freescale i.MX28 Battery measurement init + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> + +#include "mxs_init.h" + +void mxs_lradc_init(void) +{ + struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE; + + writel(LRADC_CTRL0_SFTRST, ®s->hw_lradc_ctrl0_clr); + writel(LRADC_CTRL0_CLKGATE, ®s->hw_lradc_ctrl0_clr); + writel(LRADC_CTRL0_ONCHIP_GROUNDREF, ®s->hw_lradc_ctrl0_clr); + + clrsetbits_le32(®s->hw_lradc_ctrl3, + LRADC_CTRL3_CYCLE_TIME_MASK, + LRADC_CTRL3_CYCLE_TIME_6MHZ); + + clrsetbits_le32(®s->hw_lradc_ctrl4, + LRADC_CTRL4_LRADC7SELECT_MASK | + LRADC_CTRL4_LRADC6SELECT_MASK, + LRADC_CTRL4_LRADC7SELECT_CHANNEL7 | + LRADC_CTRL4_LRADC6SELECT_CHANNEL10); +} + +void mxs_lradc_enable_batt_measurement(void) +{ + struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE; + + /* Check if the channel is present at all. */ + if (!(readl(®s->hw_lradc_status) & LRADC_STATUS_CHANNEL7_PRESENT)) + return; + + writel(LRADC_CTRL1_LRADC7_IRQ_EN, ®s->hw_lradc_ctrl1_clr); + writel(LRADC_CTRL1_LRADC7_IRQ, ®s->hw_lradc_ctrl1_clr); + + clrsetbits_le32(®s->hw_lradc_conversion, + LRADC_CONVERSION_SCALE_FACTOR_MASK, + LRADC_CONVERSION_SCALE_FACTOR_LI_ION); + writel(LRADC_CONVERSION_AUTOMATIC, ®s->hw_lradc_conversion_set); + + /* Configure the channel. */ + writel((1 << 7) << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, + ®s->hw_lradc_ctrl2_clr); + writel(0xffffffff, ®s->hw_lradc_ch7_clr); + clrbits_le32(®s->hw_lradc_ch7, LRADC_CH_NUM_SAMPLES_MASK); + writel(LRADC_CH_ACCUMULATE, ®s->hw_lradc_ch7_clr); + + /* Schedule the channel. */ + writel(1 << 7, ®s->hw_lradc_ctrl0_set); + + /* Start the channel sampling. */ + writel(((1 << 7) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) | + ((1 << 3) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) | + 100, ®s->hw_lradc_delay3); + + writel(0xffffffff, ®s->hw_lradc_ch7_clr); + + writel(LRADC_DELAY_KICK, ®s->hw_lradc_delay3_set); +} diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c new file mode 100644 index 0000000..07db279 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -0,0 +1,347 @@ +/* + * Freescale i.MX28 RAM init + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> +#include <linux/compiler.h> + +#include "mxs_init.h" + +static uint32_t dram_vals[] = { +/* + * i.MX28 DDR2 at 200MHz + */ +#if defined(CONFIG_MX28) + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000100, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00010101, 0x01010101, + 0x000f0f01, 0x0f02020a, 0x00000000, 0x00010101, + 0x00000100, 0x00000100, 0x00000000, 0x00000002, + 0x01010000, 0x07080403, 0x06005003, 0x0a0000c8, + 0x02009c40, 0x0002030c, 0x0036a609, 0x031a0612, + 0x02030202, 0x00c8001c, 0x00000000, 0x00000000, + 0x00012100, 0xffff0303, 0x00012100, 0xffff0303, + 0x00012100, 0xffff0303, 0x00012100, 0xffff0303, + 0x00000003, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000612, 0x01000F02, + 0x06120612, 0x00000200, 0x00020007, 0xf4004a27, + 0xf4004a27, 0xf4004a27, 0xf4004a27, 0x07000300, + 0x07000300, 0x07400300, 0x07400300, 0x00000005, + 0x00000000, 0x00000000, 0x01000000, 0x01020408, + 0x08040201, 0x000f1133, 0x00000000, 0x00001f04, + 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04, + 0x00001f04, 0x00001f04, 0x00001f04, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00010000, 0x00030404, + 0x00000003, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x01010000, + 0x01000000, 0x03030000, 0x00010303, 0x01020202, + 0x00000000, 0x02040303, 0x21002103, 0x00061200, + 0x06120612, 0x04420442, 0x04420442, 0x00040004, + 0x00040004, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0xffffffff + +/* + * i.MX23 DDR at 133MHz + */ +#elif defined(CONFIG_MX23) + 0x01010001, 0x00010100, 0x01000101, 0x00000001, + 0x00000101, 0x00000000, 0x00010000, 0x01000001, + 0x00000000, 0x00000001, 0x07000200, 0x00070202, + 0x02020000, 0x04040a01, 0x00000201, 0x02040000, + 0x02000000, 0x19000f08, 0x0d0d0000, 0x02021313, + 0x02061521, 0x0000000a, 0x00080008, 0x00200020, + 0x00200020, 0x00200020, 0x000003f7, 0x00000000, + 0x00000000, 0x00000020, 0x00000020, 0x00c80000, + 0x000a23cd, 0x000000c8, 0x00006665, 0x00000000, + 0x00000101, 0x00040001, 0x00000000, 0x00000000, + 0x00010000 +#else +#error Unsupported memory initialization +#endif +}; + +__weak void mxs_adjust_memory_params(uint32_t *dram_vals) +{ +} + +#ifdef CONFIG_MX28 +static void initialize_dram_values(void) +{ + int i; + + mxs_adjust_memory_params(dram_vals); + + for (i = 0; i < ARRAY_SIZE(dram_vals); i++) + writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); +} +#else +static void initialize_dram_values(void) +{ + int i; + + mxs_adjust_memory_params(dram_vals); + + /* + * HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as + * per FSL bootlets code. + * + * mx23 Reference Manual marks HW_DRAM_CTL27 and HW_DRAM_CTL28 as + * "reserved". + * HW_DRAM_CTL8 is setup as the last element. + * So skip the initialization of these HW_DRAM_CTL registers. + */ + for (i = 0; i < ARRAY_SIZE(dram_vals); i++) { + if (i == 8 || i == 27 || i == 28 || i == 35) + continue; + writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); + } + + /* + * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last + * element to be set + */ + writel((1 << 24), MXS_DRAM_BASE + (4 * 8)); +} +#endif + +static void mxs_mem_init_clock(void) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; +#if defined(CONFIG_MX23) + /* Fractional divider for ref_emi is 33 ; 480 * 18 / 33 = 266MHz */ + const unsigned char divider = 33; +#elif defined(CONFIG_MX28) + /* Fractional divider for ref_emi is 21 ; 480 * 18 / 21 = 411MHz */ + const unsigned char divider = 21; +#endif + + /* Gate EMI clock */ + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_EMI]); + + /* Set fractional divider for ref_emi */ + writeb(CLKCTRL_FRAC_CLKGATE | (divider & CLKCTRL_FRAC_FRAC_MASK), + &clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_EMI]); + + /* Ungate EMI clock */ + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_EMI]); + + early_delay(11000); + + /* Set EMI clock divider for EMI clock to 411 / 2 = 205MHz */ + writel((2 << CLKCTRL_EMI_DIV_EMI_OFFSET) | + (1 << CLKCTRL_EMI_DIV_XTAL_OFFSET), + &clkctrl_regs->hw_clkctrl_emi); + + /* Unbypass EMI */ + writel(CLKCTRL_CLKSEQ_BYPASS_EMI, + &clkctrl_regs->hw_clkctrl_clkseq_clr); + + early_delay(10000); +} + +static void mxs_mem_setup_cpu_and_hbus(void) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + + /* Set fractional divider for ref_cpu to 480 * 18 / 19 = 454MHz + * and ungate CPU clock */ + writeb(19 & CLKCTRL_FRAC_FRAC_MASK, + (uint8_t *)&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]); + + /* Set CPU bypass */ + writel(CLKCTRL_CLKSEQ_BYPASS_CPU, + &clkctrl_regs->hw_clkctrl_clkseq_set); + + /* HBUS = 151MHz */ + writel(CLKCTRL_HBUS_DIV_MASK, &clkctrl_regs->hw_clkctrl_hbus_set); + writel(((~3) << CLKCTRL_HBUS_DIV_OFFSET) & CLKCTRL_HBUS_DIV_MASK, + &clkctrl_regs->hw_clkctrl_hbus_clr); + + early_delay(10000); + + /* CPU clock divider = 1 */ + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_cpu, + CLKCTRL_CPU_DIV_CPU_MASK, 1); + + /* Disable CPU bypass */ + writel(CLKCTRL_CLKSEQ_BYPASS_CPU, + &clkctrl_regs->hw_clkctrl_clkseq_clr); + + early_delay(15000); +} + +static void mxs_mem_setup_vdda(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + writel((0xc << POWER_VDDACTRL_TRG_OFFSET) | + (0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) | + POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW, + &power_regs->hw_power_vddactrl); +} + +uint32_t mxs_mem_get_size(void) +{ + uint32_t sz, da; + uint32_t *vt = (uint32_t *)0x20; + /* The following is "subs pc, r14, #4", used as return from DABT. */ + const uint32_t data_abort_memdetect_handler = 0xe25ef004; + + /* Replace the DABT handler. */ + da = vt[4]; + vt[4] = data_abort_memdetect_handler; + + sz = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + + /* Restore the old DABT handler. */ + vt[4] = da; + + return sz; +} + +#ifdef CONFIG_MX23 +static void mx23_mem_setup_vddmem(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + clrbits_le32(&power_regs->hw_power_vddmemctrl, + POWER_VDDMEMCTRL_ENABLE_ILIMIT); + +} + +static void mx23_mem_init(void) +{ + /* + * Reset/ungate the EMI block. This is essential, otherwise the system + * suffers from memory instability. This thing is mx23 specific and is + * no longer present on mx28. + */ + mxs_reset_block((struct mxs_register_32 *)MXS_EMI_BASE); + + mx23_mem_setup_vddmem(); + + /* + * Configure the DRAM registers + */ + + /* Clear START and SREFRESH bit from DRAM_CTL8 */ + clrbits_le32(MXS_DRAM_BASE + 0x20, (1 << 16) | (1 << 8)); + + initialize_dram_values(); + + /* Set START bit in DRAM_CTL8 */ + setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16); + + clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17); + early_delay(20000); + + /* Adjust EMI port priority. */ + clrsetbits_le32(0x80020000, 0x1f << 16, 0x2); + early_delay(20000); + + setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 19); + setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 11); +} +#endif + +#ifdef CONFIG_MX28 +static void mx28_mem_init(void) +{ + struct mxs_pinctrl_regs *pinctrl_regs = + (struct mxs_pinctrl_regs *)MXS_PINCTRL_BASE; + + /* Set DDR2 mode */ + writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2, + &pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set); + + /* + * Configure the DRAM registers + */ + + /* Clear START bit from DRAM_CTL16 */ + clrbits_le32(MXS_DRAM_BASE + 0x40, 1); + + initialize_dram_values(); + + /* Clear SREFRESH bit from DRAM_CTL17 */ + clrbits_le32(MXS_DRAM_BASE + 0x44, 1); + + /* Set START bit in DRAM_CTL16 */ + setbits_le32(MXS_DRAM_BASE + 0x40, 1); + + /* Wait for bit 20 (DRAM init complete) in DRAM_CTL58 */ + while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20))) + ; +} +#endif + +void mxs_mem_init(void) +{ + early_delay(11000); + + mxs_mem_init_clock(); + + mxs_mem_setup_vdda(); + +#if defined(CONFIG_MX23) + mx23_mem_init(); +#elif defined(CONFIG_MX28) + mx28_mem_init(); +#endif + + early_delay(10000); + + mxs_mem_setup_cpu_and_hbus(); +} diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c new file mode 100644 index 0000000..21cac7b --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -0,0 +1,963 @@ +/* + * Freescale i.MX28 Boot PMIC init + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> + +#include "mxs_init.h" + +static void mxs_power_clock2xtal(void) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + + /* Set XTAL as CPU reference clock */ + writel(CLKCTRL_CLKSEQ_BYPASS_CPU, + &clkctrl_regs->hw_clkctrl_clkseq_set); +} + +static void mxs_power_clock2pll(void) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + + setbits_le32(&clkctrl_regs->hw_clkctrl_pll0ctrl0, + CLKCTRL_PLL0CTRL0_POWER); + early_delay(100); + setbits_le32(&clkctrl_regs->hw_clkctrl_clkseq, + CLKCTRL_CLKSEQ_BYPASS_CPU); +} + +static void mxs_power_clear_auto_restart(void) +{ + struct mxs_rtc_regs *rtc_regs = + (struct mxs_rtc_regs *)MXS_RTC_BASE; + + writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr); + while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST) + ; + + writel(RTC_CTRL_CLKGATE, &rtc_regs->hw_rtc_ctrl_clr); + while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE) + ; + + /* + * Due to the hardware design bug of mx28 EVK-A + * we need to set the AUTO_RESTART bit. + */ + if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART) + return; + + while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK) + ; + + setbits_le32(&rtc_regs->hw_rtc_persistent0, + RTC_PERSISTENT0_AUTO_RESTART); + writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_set); + writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_clr); + while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK) + ; + while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_STALE_REGS_MASK) + ; +} + +static void mxs_power_set_linreg(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + /* Set linear regulator 25mV below switching converter */ + clrsetbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_LINREG_OFFSET_MASK, + POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW); + + clrsetbits_le32(&power_regs->hw_power_vddactrl, + POWER_VDDACTRL_LINREG_OFFSET_MASK, + POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW); + + clrsetbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_LINREG_OFFSET_MASK, + POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW); +} + +static int mxs_get_batt_volt(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + uint32_t volt = readl(&power_regs->hw_power_battmonitor); + volt &= POWER_BATTMONITOR_BATT_VAL_MASK; + volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; + volt *= 8; + return volt; +} + +static int mxs_is_batt_ready(void) +{ + return (mxs_get_batt_volt() >= 3600); +} + +static int mxs_is_batt_good(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + uint32_t volt = mxs_get_batt_volt(); + + if ((volt >= 2400) && (volt <= 4300)) + return 1; + + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, + 0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_clr); + + clrsetbits_le32(&power_regs->hw_power_charge, + POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK, + POWER_CHARGE_STOP_ILIMIT_10MA | 0x3); + + writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr); + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_clr); + + early_delay(500000); + + volt = mxs_get_batt_volt(); + + if (volt >= 3500) + return 0; + + if (volt >= 2400) + return 1; + + writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK, + &power_regs->hw_power_charge_clr); + writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set); + + return 0; +} + +static void mxs_power_setup_5v_detect(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + /* Start 5V detection */ + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_VBUSVALID_TRSH_MASK, + POWER_5VCTRL_VBUSVALID_TRSH_4V4 | + POWER_5VCTRL_PWRUP_VBUS_CMPS); +} + +static void mxs_src_power_init(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + /* Improve efficieny and reduce transient ripple */ + writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST | + POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set); + + clrsetbits_le32(&power_regs->hw_power_dclimits, + POWER_DCLIMITS_POSLIMIT_BUCK_MASK, + 0x30 << POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET); + + setbits_le32(&power_regs->hw_power_battmonitor, + POWER_BATTMONITOR_EN_BATADJ); + + /* Increase the RCSCALE level for quick DCDC response to dynamic load */ + clrsetbits_le32(&power_regs->hw_power_loopctrl, + POWER_LOOPCTRL_EN_RCSCALE_MASK, + POWER_LOOPCTRL_RCSCALE_THRESH | + POWER_LOOPCTRL_EN_RCSCALE_8X); + + clrsetbits_le32(&power_regs->hw_power_minpwr, + POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS); + + /* 5V to battery handoff ... FIXME */ + setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER); + early_delay(30); + clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER); +} + +static void mxs_power_init_4p2_params(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + /* Setup 4P2 parameters */ + clrsetbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK, + POWER_DCDC4P2_TRG_4V2 | (31 << POWER_DCDC4P2_CMPTRIP_OFFSET)); + + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_HEADROOM_ADJ_MASK, + 0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET); + + clrsetbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_DROPOUT_CTRL_MASK, + POWER_DCDC4P2_DROPOUT_CTRL_100MV | + POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL); + + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, + 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); +} + +static void mxs_enable_4p2_dcdc_input(int xfer) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo; + uint32_t prev_5v_brnout, prev_5v_droop; + + prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) & + POWER_5VCTRL_PWDN_5VBRNOUT; + prev_5v_droop = readl(&power_regs->hw_power_ctrl) & + POWER_CTRL_ENIRQ_VDD5V_DROOP; + + clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT); + writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF, + &power_regs->hw_power_reset); + + clrbits_le32(&power_regs->hw_power_ctrl, POWER_CTRL_ENIRQ_VDD5V_DROOP); + + if (xfer && (readl(&power_regs->hw_power_5vctrl) & + POWER_5VCTRL_ENABLE_DCDC)) { + return; + } + + /* + * Recording orignal values that will be modified temporarlily + * to handle a chip bug. See chip errata for CQ ENGR00115837 + */ + tmp = readl(&power_regs->hw_power_5vctrl); + vbus_thresh = tmp & POWER_5VCTRL_VBUSVALID_TRSH_MASK; + vbus_5vdetect = tmp & POWER_5VCTRL_VBUSVALID_5VDETECT; + + pwd_bo = readl(&power_regs->hw_power_minpwr) & POWER_MINPWR_PWD_BO; + + /* + * Disable mechanisms that get erroneously tripped by when setting + * the DCDC4P2 EN_DCDC + */ + clrbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_VBUSVALID_5VDETECT | + POWER_5VCTRL_VBUSVALID_TRSH_MASK); + + writel(POWER_MINPWR_PWD_BO, &power_regs->hw_power_minpwr_set); + + if (xfer) { + setbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_DCDC_XFER); + early_delay(20); + clrbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_DCDC_XFER); + + setbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_ENABLE_DCDC); + } else { + setbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_ENABLE_DCDC); + } + + early_delay(25); + + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_VBUSVALID_TRSH_MASK, vbus_thresh); + + if (vbus_5vdetect) + writel(vbus_5vdetect, &power_regs->hw_power_5vctrl_set); + + if (!pwd_bo) + clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO); + + while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) + writel(POWER_CTRL_VBUS_VALID_IRQ, + &power_regs->hw_power_ctrl_clr); + + if (prev_5v_brnout) { + writel(POWER_5VCTRL_PWDN_5VBRNOUT, + &power_regs->hw_power_5vctrl_set); + writel(POWER_RESET_UNLOCK_KEY, + &power_regs->hw_power_reset); + } else { + writel(POWER_5VCTRL_PWDN_5VBRNOUT, + &power_regs->hw_power_5vctrl_clr); + writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF, + &power_regs->hw_power_reset); + } + + while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ) + writel(POWER_CTRL_VDD5V_DROOP_IRQ, + &power_regs->hw_power_ctrl_clr); + + if (prev_5v_droop) + clrbits_le32(&power_regs->hw_power_ctrl, + POWER_CTRL_ENIRQ_VDD5V_DROOP); + else + setbits_le32(&power_regs->hw_power_ctrl, + POWER_CTRL_ENIRQ_VDD5V_DROOP); +} + +static void mxs_power_init_4p2_regulator(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + uint32_t tmp, tmp2; + + setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2); + + writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set); + + writel(POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, + &power_regs->hw_power_5vctrl_clr); + clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_TRG_MASK); + + /* Power up the 4p2 rail and logic/control */ + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_clr); + + /* + * Start charging up the 4p2 capacitor. We ramp of this charge + * gradually to avoid large inrush current from the 5V cable which can + * cause transients/problems + */ + mxs_enable_4p2_dcdc_input(0); + + if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) { + /* + * If we arrived here, we were unable to recover from mx23 chip + * errata 5837. 4P2 is disabled and sufficient battery power is + * not present. Exiting to not enable DCDC power during 5V + * connected state. + */ + clrbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_ENABLE_DCDC); + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_set); + hang(); + } + + /* + * Here we set the 4p2 brownout level to something very close to 4.2V. + * We then check the brownout status. If the brownout status is false, + * the voltage is already close to the target voltage of 4.2V so we + * can go ahead and set the 4P2 current limit to our max target limit. + * If the brownout status is true, we need to ramp us the current limit + * so that we don't cause large inrush current issues. We step up the + * current limit until the brownout status is false or until we've + * reached our maximum defined 4p2 current limit. + */ + clrsetbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_BO_MASK, + 22 << POWER_DCDC4P2_BO_OFFSET); /* 4.15V */ + + if (!(readl(&power_regs->hw_power_sts) & POWER_STS_DCDC_4P2_BO)) { + setbits_le32(&power_regs->hw_power_5vctrl, + 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); + } else { + tmp = (readl(&power_regs->hw_power_5vctrl) & + POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK) >> + POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET; + while (tmp < 0x3f) { + if (!(readl(&power_regs->hw_power_sts) & + POWER_STS_DCDC_4P2_BO)) { + tmp = readl(&power_regs->hw_power_5vctrl); + tmp |= POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK; + early_delay(100); + writel(tmp, &power_regs->hw_power_5vctrl); + break; + } else { + tmp++; + tmp2 = readl(&power_regs->hw_power_5vctrl); + tmp2 &= ~POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK; + tmp2 |= tmp << + POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET; + writel(tmp2, &power_regs->hw_power_5vctrl); + early_delay(100); + } + } + } + + clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK); + writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr); +} + +static void mxs_power_init_dcdc_4p2_source(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + if (!(readl(&power_regs->hw_power_dcdc4p2) & + POWER_DCDC4P2_ENABLE_DCDC)) { + hang(); + } + + mxs_enable_4p2_dcdc_input(1); + + if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) { + clrbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_ENABLE_DCDC); + writel(POWER_5VCTRL_ENABLE_DCDC, + &power_regs->hw_power_5vctrl_clr); + writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK, + &power_regs->hw_power_5vctrl_set); + } +} + +static void mxs_power_enable_4p2(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + uint32_t vdddctrl, vddactrl, vddioctrl; + uint32_t tmp; + + vdddctrl = readl(&power_regs->hw_power_vdddctrl); + vddactrl = readl(&power_regs->hw_power_vddactrl); + vddioctrl = readl(&power_regs->hw_power_vddioctrl); + + setbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG | + POWER_VDDDCTRL_PWDN_BRNOUT); + + setbits_le32(&power_regs->hw_power_vddactrl, + POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG | + POWER_VDDACTRL_PWDN_BRNOUT); + + setbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT); + + mxs_power_init_4p2_params(); + mxs_power_init_4p2_regulator(); + + /* Shutdown battery (none present) */ + if (!mxs_is_batt_ready()) { + clrbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_BO_MASK); + writel(POWER_CTRL_DCDC4P2_BO_IRQ, + &power_regs->hw_power_ctrl_clr); + writel(POWER_CTRL_ENIRQ_DCDC4P2_BO, + &power_regs->hw_power_ctrl_clr); + } + + mxs_power_init_dcdc_4p2_source(); + + writel(vdddctrl, &power_regs->hw_power_vdddctrl); + early_delay(20); + writel(vddactrl, &power_regs->hw_power_vddactrl); + early_delay(20); + writel(vddioctrl, &power_regs->hw_power_vddioctrl); + + /* + * Check if FET is enabled on either powerout and if so, + * disable load. + */ + tmp = 0; + tmp |= !(readl(&power_regs->hw_power_vdddctrl) & + POWER_VDDDCTRL_DISABLE_FET); + tmp |= !(readl(&power_regs->hw_power_vddactrl) & + POWER_VDDACTRL_DISABLE_FET); + tmp |= !(readl(&power_regs->hw_power_vddioctrl) & + POWER_VDDIOCTRL_DISABLE_FET); + if (tmp) + writel(POWER_CHARGE_ENABLE_LOAD, + &power_regs->hw_power_charge_clr); +} + +static void mxs_boot_valid_5v(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + /* + * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V + * disconnect event. FIXME + */ + writel(POWER_5VCTRL_VBUSVALID_5VDETECT, + &power_regs->hw_power_5vctrl_set); + + /* Configure polarity to check for 5V disconnection. */ + writel(POWER_CTRL_POLARITY_VBUSVALID | + POWER_CTRL_POLARITY_VDD5V_GT_VDDIO, + &power_regs->hw_power_ctrl_clr); + + writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ, + &power_regs->hw_power_ctrl_clr); + + mxs_power_enable_4p2(); +} + +static void mxs_powerdown(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset); + writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF, + &power_regs->hw_power_reset); +} + +static void mxs_batt_boot(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT); + clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC); + + clrbits_le32(&power_regs->hw_power_dcdc4p2, + POWER_DCDC4P2_ENABLE_DCDC | POWER_DCDC4P2_ENABLE_4P2); + writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_clr); + + /* 5V to battery handoff. */ + setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER); + early_delay(30); + clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER); + + writel(POWER_CTRL_ENIRQ_DCDC4P2_BO, &power_regs->hw_power_ctrl_clr); + + clrsetbits_le32(&power_regs->hw_power_minpwr, + POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS); + + mxs_power_set_linreg(); + + clrbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG); + + clrbits_le32(&power_regs->hw_power_vddactrl, + POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG); + + clrbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_DISABLE_FET); + + setbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_PWD_CHARGE_4P2_MASK); + + setbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_ENABLE_DCDC); + + clrsetbits_le32(&power_regs->hw_power_5vctrl, + POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK, + 0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); +} + +static void mxs_handle_5v_conflict(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + uint32_t tmp; + + setbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_BO_OFFSET_MASK); + + for (;;) { + tmp = readl(&power_regs->hw_power_sts); + + if (tmp & POWER_STS_VDDIO_BO) { + /* + * VDDIO has a brownout, then the VDD5V_GT_VDDIO becomes + * unreliable + */ + mxs_powerdown(); + break; + } + + if (tmp & POWER_STS_VDD5V_GT_VDDIO) { + mxs_boot_valid_5v(); + break; + } else { + mxs_powerdown(); + break; + } + + if (tmp & POWER_STS_PSWITCH_MASK) { + mxs_batt_boot(); + break; + } + } +} + +static void mxs_5v_boot(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + /* + * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID, + * but their implementation always returns 1 so we omit it here. + */ + if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + mxs_boot_valid_5v(); + return; + } + + early_delay(1000); + if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + mxs_boot_valid_5v(); + return; + } + + mxs_handle_5v_conflict(); +} + +static void mxs_init_batt_bo(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + /* Brownout at 3V */ + clrsetbits_le32(&power_regs->hw_power_battmonitor, + POWER_BATTMONITOR_BRWNOUT_LVL_MASK, + 15 << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET); + + writel(POWER_CTRL_BATT_BO_IRQ, &power_regs->hw_power_ctrl_clr); + writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr); +} + +static void mxs_switch_vddd_to_dcdc_source(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + clrsetbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_LINREG_OFFSET_MASK, + POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW); + + clrbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG | + POWER_VDDDCTRL_DISABLE_STEPPING); +} + +static void mxs_power_configure_power_source(void) +{ + int batt_ready, batt_good; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + struct mxs_lradc_regs *lradc_regs = + (struct mxs_lradc_regs *)MXS_LRADC_BASE; + + mxs_src_power_init(); + + if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + batt_ready = mxs_is_batt_ready(); + if (batt_ready) { + /* 5V source detected, good battery detected. */ + mxs_batt_boot(); + } else { + batt_good = mxs_is_batt_good(); + if (!batt_good) { + /* 5V source detected, bad battery detected. */ + writel(LRADC_CONVERSION_AUTOMATIC, + &lradc_regs->hw_lradc_conversion_clr); + clrbits_le32(&power_regs->hw_power_battmonitor, + POWER_BATTMONITOR_BATT_VAL_MASK); + } + mxs_5v_boot(); + } + } else { + /* 5V not detected, booting from battery. */ + mxs_batt_boot(); + } + + mxs_power_clock2pll(); + + mxs_init_batt_bo(); + + mxs_switch_vddd_to_dcdc_source(); + +#ifdef CONFIG_MX23 + /* Fire up the VDDMEM LinReg now that we're all set. */ + writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT, + &power_regs->hw_power_vddmemctrl); +#endif +} + +static void mxs_enable_output_rail_protection(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | + POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr); + + setbits_le32(&power_regs->hw_power_vdddctrl, + POWER_VDDDCTRL_PWDN_BRNOUT); + + setbits_le32(&power_regs->hw_power_vddactrl, + POWER_VDDACTRL_PWDN_BRNOUT); + + setbits_le32(&power_regs->hw_power_vddioctrl, + POWER_VDDIOCTRL_PWDN_BRNOUT); +} + +static int mxs_get_vddio_power_source_off(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + uint32_t tmp; + + if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + tmp = readl(&power_regs->hw_power_vddioctrl); + if (tmp & POWER_VDDIOCTRL_DISABLE_FET) { + if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) == + POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) { + return 1; + } + } + + if (!(readl(&power_regs->hw_power_5vctrl) & + POWER_5VCTRL_ENABLE_DCDC)) { + if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) == + POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) { + return 1; + } + } + } + + return 0; + +} + +static int mxs_get_vddd_power_source_off(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + uint32_t tmp; + + tmp = readl(&power_regs->hw_power_vdddctrl); + if (tmp & POWER_VDDDCTRL_DISABLE_FET) { + if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) == + POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) { + return 1; + } + } + + if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { + if (!(readl(&power_regs->hw_power_5vctrl) & + POWER_5VCTRL_ENABLE_DCDC)) { + return 1; + } + } + + if (!(tmp & POWER_VDDDCTRL_ENABLE_LINREG)) { + if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) == + POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW) { + return 1; + } + } + + return 0; +} + +struct mxs_vddx_cfg { + uint32_t *reg; + uint8_t step_mV; + uint16_t lowest_mV; + int (*powered_by_linreg)(void); + uint32_t trg_mask; + uint32_t bo_irq; + uint32_t bo_enirq; + uint32_t bo_offset_mask; + uint32_t bo_offset_offset; +}; + +static const struct mxs_vddx_cfg mxs_vddio_cfg = { + .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)-> + hw_power_vddioctrl), +#if defined(CONFIG_MX23) + .step_mV = 25, +#else + .step_mV = 50, +#endif + .lowest_mV = 2800, + .powered_by_linreg = mxs_get_vddio_power_source_off, + .trg_mask = POWER_VDDIOCTRL_TRG_MASK, + .bo_irq = POWER_CTRL_VDDIO_BO_IRQ, + .bo_enirq = POWER_CTRL_ENIRQ_VDDIO_BO, + .bo_offset_mask = POWER_VDDIOCTRL_BO_OFFSET_MASK, + .bo_offset_offset = POWER_VDDIOCTRL_BO_OFFSET_OFFSET, +}; + +static const struct mxs_vddx_cfg mxs_vddd_cfg = { + .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)-> + hw_power_vdddctrl), + .step_mV = 25, + .lowest_mV = 800, + .powered_by_linreg = mxs_get_vddd_power_source_off, + .trg_mask = POWER_VDDDCTRL_TRG_MASK, + .bo_irq = POWER_CTRL_VDDD_BO_IRQ, + .bo_enirq = POWER_CTRL_ENIRQ_VDDD_BO, + .bo_offset_mask = POWER_VDDDCTRL_BO_OFFSET_MASK, + .bo_offset_offset = POWER_VDDDCTRL_BO_OFFSET_OFFSET, +}; + +#ifdef CONFIG_MX23 +static const struct mxs_vddx_cfg mxs_vddmem_cfg = { + .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)-> + hw_power_vddmemctrl), + .step_mV = 50, + .lowest_mV = 1700, + .powered_by_linreg = NULL, + .trg_mask = POWER_VDDMEMCTRL_TRG_MASK, + .bo_irq = 0, + .bo_enirq = 0, + .bo_offset_mask = 0, + .bo_offset_offset = 0, +}; +#endif + +static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, + uint32_t new_target, uint32_t new_brownout) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + uint32_t cur_target, diff, bo_int = 0; + uint32_t powered_by_linreg = 0; + int adjust_up, tmp; + + new_brownout = DIV_ROUND(new_target - new_brownout, cfg->step_mV); + + cur_target = readl(cfg->reg); + cur_target &= cfg->trg_mask; + cur_target *= cfg->step_mV; + cur_target += cfg->lowest_mV; + + adjust_up = new_target > cur_target; + if (cfg->powered_by_linreg) + powered_by_linreg = cfg->powered_by_linreg(); + + if (adjust_up && cfg->bo_irq) { + if (powered_by_linreg) { + bo_int = readl(cfg->reg); + clrbits_le32(cfg->reg, cfg->bo_enirq); + } + setbits_le32(cfg->reg, cfg->bo_offset_mask); + } + + do { + if (abs(new_target - cur_target) > 100) { + if (adjust_up) + diff = cur_target + 100; + else + diff = cur_target - 100; + } else { + diff = new_target; + } + + diff -= cfg->lowest_mV; + diff /= cfg->step_mV; + + clrsetbits_le32(cfg->reg, cfg->trg_mask, diff); + + if (powered_by_linreg || + (readl(&power_regs->hw_power_sts) & + POWER_STS_VDD5V_GT_VDDIO)) + early_delay(500); + else { + for (;;) { + tmp = readl(&power_regs->hw_power_sts); + if (tmp & POWER_STS_DC_OK) + break; + } + } + + cur_target = readl(cfg->reg); + cur_target &= cfg->trg_mask; + cur_target *= cfg->step_mV; + cur_target += cfg->lowest_mV; + } while (new_target > cur_target); + + if (cfg->bo_irq) { + if (adjust_up && powered_by_linreg) { + writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr); + if (bo_int & cfg->bo_enirq) + setbits_le32(cfg->reg, cfg->bo_enirq); + } + + clrsetbits_le32(cfg->reg, cfg->bo_offset_mask, + new_brownout << cfg->bo_offset_offset); + } +} + +static void mxs_setup_batt_detect(void) +{ + mxs_lradc_init(); + mxs_lradc_enable_batt_measurement(); + early_delay(10); +} + +static void mxs_ungate_power(void) +{ +#ifdef CONFIG_MX23 + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + writel(POWER_CTRL_CLKGATE, &power_regs->hw_power_ctrl_clr); +#endif +} + +void mxs_power_init(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + mxs_ungate_power(); + + mxs_power_clock2xtal(); + mxs_power_clear_auto_restart(); + mxs_power_set_linreg(); + mxs_power_setup_5v_detect(); + + mxs_setup_batt_detect(); + + mxs_power_configure_power_source(); + mxs_enable_output_rail_protection(); + + mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150); + mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000); +#ifdef CONFIG_MX23 + mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700); +#endif + writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | + POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ | + POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ | + POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr); + + writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set); + + early_delay(1000); +} + +#ifdef CONFIG_SPL_MXS_PSWITCH_WAIT +void mxs_power_wait_pswitch(void) +{ + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + + while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK)) + ; +} +#endif diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S new file mode 100644 index 0000000..bf54423 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -0,0 +1,209 @@ +/* + * armboot - Startup Code for ARM926EJS CPU-core + * + * Copyright (c) 2003 Texas Instruments + * + * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------ + * + * Copyright (c) 2001 Marius Groger <mag@sysgo.de> + * Copyright (c) 2002 Alex Zupke <azu@sysgo.de> + * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> + * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> + * Copyright (c) 2003 Kshitij <kshitij@ti.com> + * Copyright (c) 2010 Albert Aribaud <albert.u.boot@aribaud.net> + * + * Change to support call back into iMX28 bootrom + * Copyright (c) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm-offsets.h> +#include <config.h> +#include <common.h> +#include <version.h> + +/* + ************************************************************************* + * + * Jump vector table as in table 3.1 in [1] + * + ************************************************************************* + */ + + +.globl _start +_start: + b reset + b undefined_instruction + b software_interrupt + b prefetch_abort + b data_abort + b not_used + b irq + b fiq + +/* + * Vector table, located at address 0x20. + * This table allows the code running AFTER SPL, the U-Boot, to install it's + * interrupt handlers here. The problem is that the U-Boot is loaded into RAM, + * including it's interrupt vectoring table and the table at 0x0 is still the + * SPLs. So if interrupt happens in U-Boot, the SPLs interrupt vectoring table + * is still used. + */ +_vt_reset: + .word _reset +_vt_undefined_instruction: + .word _hang +_vt_software_interrupt: + .word _hang +_vt_prefetch_abort: + .word _hang +_vt_data_abort: + .word _hang +_vt_not_used: + .word _reset +_vt_irq: + .word _hang +_vt_fiq: + .word _hang + +reset: + ldr pc, _vt_reset +undefined_instruction: + ldr pc, _vt_undefined_instruction +software_interrupt: + ldr pc, _vt_software_interrupt +prefetch_abort: + ldr pc, _vt_prefetch_abort +data_abort: + ldr pc, _vt_data_abort +not_used: + ldr pc, _vt_not_used +irq: + ldr pc, _vt_irq +fiq: + ldr pc, _vt_fiq + + .balignl 16,0xdeadbeef + +/* + ************************************************************************* + * + * Startup Code (reset vector) + * + * do important init only if we don't start from memory! + * setup Memory and board specific bits prior to relocation. + * relocate armboot to ram + * setup stack + * + ************************************************************************* + */ + +.globl _TEXT_BASE +_TEXT_BASE: +#ifdef CONFIG_SPL_TEXT_BASE + .word CONFIG_SPL_TEXT_BASE +#else + .word CONFIG_SYS_TEXT_BASE +#endif + +/* + * These are defined in the board-specific linker script. + * Subtracting _start from them lets the linker put their + * relative position in the executable instead of leaving + * them null. + */ +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start + +.globl _bss_end_ofs +_bss_end_ofs: + .word __bss_end - _start + +.globl _end_ofs +_end_ofs: + .word _end - _start + +#ifdef CONFIG_USE_IRQ +/* IRQ stack memory (calculated at run-time) */ +.globl IRQ_STACK_START +IRQ_STACK_START: + .word 0x0badc0de + +/* IRQ stack memory (calculated at run-time) */ +.globl FIQ_STACK_START +FIQ_STACK_START: + .word 0x0badc0de +#endif + +/* IRQ stack memory (calculated at run-time) + 8 bytes */ +.globl IRQ_STACK_START_IN +IRQ_STACK_START_IN: + .word 0x0badc0de + +/* + * the actual reset code + */ + +_reset: + /* + * Store all registers on old stack pointer, this will allow us later to + * return to the BootROM and let the BootROM load U-Boot into RAM. + */ + push {r0-r12,r14} + + /* save control register c1 */ + mrc p15, 0, r0, c1, c0, 0 + push {r0} + + /* + * set the cpu to SVC32 mode and store old CPSR register content + */ + mrs r0,cpsr + push {r0} + bic r0,r0,#0x1f + orr r0,r0,#0xd3 + msr cpsr,r0 + + bl board_init_ll + + /* + * restore bootrom's cpu mode (especially FIQ) + */ + pop {r0} + msr cpsr,r0 + + /* + * restore c1 register + * (especially set exception vector location back to + * bootrom space which is required by bootrom for USB boot) + */ + pop {r0} + mcr p15, 0, r0, c1, c0, 0 + + pop {r0-r12,r14} + bx lr + +_hang: + ldr sp, _TEXT_BASE /* switch to abort stack */ +1: + bl 1b /* hang and never return */ diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c new file mode 100644 index 0000000..2039106 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/timer.c @@ -0,0 +1,175 @@ +/* + * Freescale i.MX28 timer driver + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * (C) Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +/* Maximum fixed count */ +#if defined(CONFIG_MX23) +#define TIMER_LOAD_VAL 0xffff +#elif defined(CONFIG_MX28) +#define TIMER_LOAD_VAL 0xffffffff +#endif + +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp (gd->arch.tbl) +#define lastdec (gd->arch.lastinc) + +/* + * This driver uses 1kHz clock source. + */ +#define MXS_INCREMENTER_HZ 1000 + +static inline unsigned long tick_to_time(unsigned long tick) +{ + return tick / (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ); +} + +static inline unsigned long time_to_tick(unsigned long time) +{ + return time * (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ); +} + +/* Calculate how many ticks happen in "us" microseconds */ +static inline unsigned long us_to_tick(unsigned long us) +{ + return (us * MXS_INCREMENTER_HZ) / 1000000; +} + +int timer_init(void) +{ + struct mxs_timrot_regs *timrot_regs = + (struct mxs_timrot_regs *)MXS_TIMROT_BASE; + + /* Reset Timers and Rotary Encoder module */ + mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg); + + /* Set fixed_count to 0 */ +#if defined(CONFIG_MX23) + writel(0, &timrot_regs->hw_timrot_timcount0); +#elif defined(CONFIG_MX28) + writel(0, &timrot_regs->hw_timrot_fixed_count0); +#endif + + /* Set UPDATE bit and 1Khz frequency */ + writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD | + TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL, + &timrot_regs->hw_timrot_timctrl0); + + /* Set fixed_count to maximal value */ +#if defined(CONFIG_MX23) + writel(TIMER_LOAD_VAL - 1, &timrot_regs->hw_timrot_timcount0); +#elif defined(CONFIG_MX28) + writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0); +#endif + + return 0; +} + +unsigned long long get_ticks(void) +{ + struct mxs_timrot_regs *timrot_regs = + (struct mxs_timrot_regs *)MXS_TIMROT_BASE; + uint32_t now; + + /* Current tick value */ +#if defined(CONFIG_MX23) + /* Upper bits are the valid ones. */ + now = readl(&timrot_regs->hw_timrot_timcount0) >> + TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET; +#elif defined(CONFIG_MX28) + now = readl(&timrot_regs->hw_timrot_running_count0); +#endif + + if (lastdec >= now) { + /* + * normal mode (non roll) + * move stamp forward with absolut diff ticks + */ + timestamp += (lastdec - now); + } else { + /* we have rollover of decrementer */ + timestamp += (TIMER_LOAD_VAL - now) + lastdec; + + } + lastdec = now; + + return timestamp; +} + +ulong get_timer_masked(void) +{ + return tick_to_time(get_ticks()); +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +/* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */ +#define MXS_HW_DIGCTL_MICROSECONDS 0x8001c0c0 + +void __udelay(unsigned long usec) +{ + uint32_t old, new, incr; + uint32_t counter = 0; + + old = readl(MXS_HW_DIGCTL_MICROSECONDS); + + while (counter < usec) { + new = readl(MXS_HW_DIGCTL_MICROSECONDS); + + /* Check if the timer wrapped. */ + if (new < old) { + incr = 0xffffffff - old; + incr += new; + } else { + incr = new - old; + } + + /* + * Check if we are close to the maximum time and the counter + * would wrap if incremented. If that's the case, break out + * from the loop as the requested delay time passed. + */ + if (counter + incr < counter) + break; + + counter += incr; + old = new; + } +} + +ulong get_tbclk(void) +{ + return MXS_INCREMENTER_HZ; +} diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd new file mode 100644 index 0000000..8b6c30e --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd @@ -0,0 +1,18 @@ +options { + driveTag = 0x00; + flags = 0x01; +} + +sources { + u_boot_spl="OBJTREE/spl/u-boot-spl.bin"; + u_boot="OBJTREE/u-boot.bin"; +} + +section (0) { + load u_boot_spl > 0x0000; + load ivt (entry = 0x0014) > 0x8000; + call 0x8000; + + load u_boot > 0x40000100; + call 0x40000100; +} diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd new file mode 100644 index 0000000..a5fa648 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd @@ -0,0 +1,14 @@ +sources { + u_boot_spl="OBJTREE/spl/u-boot-spl.bin"; + u_boot="OBJTREE/u-boot.bin"; +} + +section (0) { + load u_boot_spl > 0x0000; + load ivt (entry = 0x0014) > 0x8000; + hab call 0x8000; + + load u_boot > 0x40000100; + load ivt (entry = 0x40000100) > 0x8000; + hab call 0x8000; +} diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds new file mode 100644 index 0000000..f4e7525 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * January 2004 - Changed to support H4 device + * Copyright (c) 2004-2008 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + arch/arm/cpu/arm926ejs/mxs/start.o (.text*) + *(.text*) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { + *(.data*) + } + + . = ALIGN(4); + + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .bss : { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } + + _end = .; + + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynsym*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.hash*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } +} |
