diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c')
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 225 |
1 files changed, 225 insertions, 0 deletions
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c new file mode 100644 index 0000000..5e995e1 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -0,0 +1,225 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 6, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 7, PUP); /* RXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 8, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTB, 9, PUP); /* RXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +void at91_seriald_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */ + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTC, 11, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTC, 16, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTC, 17, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTA, 3, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTC, 11, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTC, 16, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTC, 17, 1); + } +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) { + at91_set_a_periph(AT91_PIO_PORTB, 3, 1); + } + if (cs_mask & (1 << 1)) { + at91_set_b_periph(AT91_PIO_PORTC, 5, 1); + } + if (cs_mask & (1 << 2)) { + at91_set_b_periph(AT91_PIO_PORTC, 4, 1); + } + if (cs_mask & (1 << 3)) { + at91_set_b_periph(AT91_PIO_PORTC, 3, 1); + } + if (cs_mask & (1 << 4)) { + at91_set_pio_output(AT91_PIO_PORTB, 3, 1); + } + if (cs_mask & (1 << 5)) { + at91_set_pio_output(AT91_PIO_PORTC, 5, 1); + } + if (cs_mask & (1 << 6)) { + at91_set_pio_output(AT91_PIO_PORTC, 4, 1); + } + if (cs_mask & (1 << 7)) { + at91_set_pio_output(AT91_PIO_PORTC, 3, 1); + } +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + /* Enable EMAC clock */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ECRS */ + at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECOL */ + at91_set_b_periph(AT91_PIO_PORTA, 25, 0); /* ERX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 26, 0); /* ERX3 */ + at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ERXCK */ +#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260) + /* + * use PA10, PA11 for ETX2, ETX3. + * PA23 and PA24 are for TWI EEPROM + */ + at91_set_b_periph(AT91_PIO_PORTA, 10, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 11, 0); /* ETX3 */ +#else + at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTA, 24, 0); /* ETX3 */ +#if defined(CONFIG_AT91SAM9G20) + /* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */ + at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0); + at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0); +#endif +#endif + at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* ETXER */ +#endif +} +#endif + +#if defined(CONFIG_GENERIC_ATMEL_MCI) +void at91_mci_hw_init(void) +{ + /* Enable mci clock */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_MCI, &pmc->pcer); + + at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */ +#if defined(CONFIG_ATMEL_MCI_PORTB) + at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */ + at91_set_b_periph(AT91_PIO_PORTA, 0, 1); /* MCDB0 */ + at91_set_b_periph(AT91_PIO_PORTA, 5, 1); /* MCDB1 */ + at91_set_b_periph(AT91_PIO_PORTA, 4, 1); /* MCDB2 */ + at91_set_b_periph(AT91_PIO_PORTA, 3, 1); /* MCDB3 */ +#else + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* MCCDA */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* MCDA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 1); /* MCDA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* MCDA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* MCDA3 */ +#endif +} +#endif |
