diff options
Diffstat (limited to 'net/mac80211/Kconfig')
| -rw-r--r-- | net/mac80211/Kconfig | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig new file mode 100644 index 0000000..7f710a2 --- /dev/null +++ b/net/mac80211/Kconfig @@ -0,0 +1,211 @@ +config MAC80211 + tristate "Generic IEEE 802.11 Networking Stack (mac80211)" + select CRYPTO + select CRYPTO_ECB + select CRYPTO_ARC4 + select CRYPTO_AES + select CRC32 + select WIRELESS_EXT + select CFG80211 + ---help--- + This option enables the hardware independent IEEE 802.11 + networking stack. + +menu "Rate control algorithm selection" + depends on MAC80211 != n + +config MAC80211_RC_PID + bool "PID controller based rate control algorithm" if EMBEDDED + default y + ---help--- + This option enables a TX rate control algorithm for + mac80211 that uses a PID controller to select the TX + rate. + +config MAC80211_RC_MINSTREL + bool "Minstrel" + ---help--- + This option enables the 'minstrel' TX rate control algorithm + +choice + prompt "Default rate control algorithm" + default MAC80211_RC_DEFAULT_PID + ---help--- + This option selects the default rate control algorithm + mac80211 will use. Note that this default can still be + overriden through the ieee80211_default_rc_algo module + parameter if different algorithms are available. + +config MAC80211_RC_DEFAULT_PID + bool "PID controller based rate control algorithm" + depends on MAC80211_RC_PID + ---help--- + Select the PID controller based rate control as the + default rate control algorithm. You should choose + this unless you know what you are doing. + +config MAC80211_RC_DEFAULT_MINSTREL + bool "Minstrel" + depends on MAC80211_RC_MINSTREL + ---help--- + Select Minstrel as the default rate control algorithm. + + +endchoice + +config MAC80211_RC_DEFAULT + string + default "pid" if MAC80211_RC_DEFAULT_PID + default "minstrel" if MAC80211_RC_DEFAULT_MINSTREL + default "" + +endmenu + +config MAC80211_MESH + bool "Enable mac80211 mesh networking (pre-802.11s) support" + depends on MAC80211 && EXPERIMENTAL + ---help--- + This options enables support of Draft 802.11s mesh networking. + The implementation is based on Draft 1.08 of the Mesh Networking + amendment. For more information visit http://o11s.org/. + + +config MAC80211_LEDS + bool "Enable LED triggers" + depends on MAC80211 + select NEW_LEDS + select LEDS_TRIGGERS + ---help--- + This option enables a few LED triggers for different + packet receive/transmit events. + +config MAC80211_DEBUGFS + bool "Export mac80211 internals in DebugFS" + depends on MAC80211 && DEBUG_FS + ---help--- + Select this to see extensive information about + the internal state of mac80211 in debugfs. + + Say N unless you know you need this. + +menuconfig MAC80211_DEBUG_MENU + bool "Select mac80211 debugging features" + depends on MAC80211 + ---help--- + This option collects various mac80211 debug settings. + +config MAC80211_DEBUG_PACKET_ALIGNMENT + bool "Enable packet alignment debugging" + depends on MAC80211_DEBUG_MENU + ---help--- + This option is recommended for driver authors and strongly + discouraged for everybody else, it will trigger a warning + when a driver hands mac80211 a buffer that is aligned in + a way that will cause problems with the IP stack on some + architectures. + + Say N unless you're writing a mac80211 based driver. + +config MAC80211_NOINLINE + bool "Do not inline TX/RX handlers" + depends on MAC80211_DEBUG_MENU + ---help--- + This option affects code generation in mac80211, when + selected some functions are marked "noinline" to allow + easier debugging of problems in the transmit and receive + paths. + + This option increases code size a bit and inserts a lot + of function calls in the code, but is otherwise safe to + enable. + + If unsure, say N unless you expect to be finding problems + in mac80211. + +config MAC80211_VERBOSE_DEBUG + bool "Verbose debugging output" + depends on MAC80211_DEBUG_MENU + ---help--- + Selecting this option causes mac80211 to print out + many debugging messages. It should not be selected + on production systems as some of the messages are + remotely triggerable. + + Do not select this option. + +config MAC80211_HT_DEBUG + bool "Verbose HT debugging" + depends on MAC80211_DEBUG_MENU + ---help--- + This option enables 802.11n High Throughput features + debug tracing output. + + It should not be selected on production systems as some + of the messages are remotely triggerable. + + Do not select this option. + +config MAC80211_TKIP_DEBUG + bool "Verbose TKIP debugging" + depends on MAC80211_DEBUG_MENU + ---help--- + Selecting this option causes mac80211 to print out + very verbose TKIP debugging messages. It should not + be selected on production systems as those messages + are remotely triggerable. + + Do not select this option. + +config MAC80211_IBSS_DEBUG + bool "Verbose IBSS debugging" + depends on MAC80211_DEBUG_MENU + ---help--- + Selecting this option causes mac80211 to print out + very verbose IBSS debugging messages. It should not + be selected on production systems as those messages + are remotely triggerable. + + Do not select this option. + +config MAC80211_VERBOSE_PS_DEBUG + bool "Verbose powersave mode debugging" + depends on MAC80211_DEBUG_MENU + ---help--- + Selecting this option causes mac80211 to print out very + verbose power save mode debugging messages (when mac80211 + is an AP and has power saving stations.) + It should not be selected on production systems as those + messages are remotely triggerable. + + Do not select this option. + +config MAC80211_VERBOSE_MPL_DEBUG + bool "Verbose mesh peer link debugging" + depends on MAC80211_DEBUG_MENU + depends on MAC80211_MESH + ---help--- + Selecting this option causes mac80211 to print out very + verbose mesh peer link debugging messages (when mac80211 + is taking part in a mesh network). + It should not be selected on production systems as those + messages are remotely triggerable. + + Do not select this option. + +config MAC80211_DEBUG_COUNTERS + bool "Extra statistics for TX/RX debugging" + depends on MAC80211_DEBUG_MENU + depends on MAC80211_DEBUGFS + ---help--- + Selecting this option causes mac80211 to keep additional + and very verbose statistics about TX and RX handler use + and show them in debugfs. + + If unsure, say N. + +config MAC80211_VERBOSE_SPECT_MGMT_DEBUG + bool "Verbose Spectrum Management (IEEE 802.11h)debugging" + depends on MAC80211_DEBUG_MENU + ---help--- + Say Y here to print out verbose Spectrum Management (IEEE 802.11h) + debug messages. |
