diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb/af9005.c')
| -rw-r--r-- | drivers/media/dvb/dvb-usb/af9005.c | 1144 |
1 files changed, 1144 insertions, 0 deletions
diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c new file mode 100644 index 0000000..ca5a0a4 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/af9005.c @@ -0,0 +1,1144 @@ +/* DVB USB compliant Linux driver for the Afatech 9005 + * USB1.1 DVB-T receiver. + * + * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * see Documentation/dvb/REDME.dvb-usb for more information + */ +#include "af9005.h" + +/* debug */ +int dvb_usb_af9005_debug; +module_param_named(debug, dvb_usb_af9005_debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))." + DVB_USB_DEBUG_STATUS); +/* enable obnoxious led */ +int dvb_usb_af9005_led = 1; +module_param_named(led, dvb_usb_af9005_led, bool, 0644); +MODULE_PARM_DESC(led, "enable led (default: 1)."); + +/* eeprom dump */ +static int dvb_usb_af9005_dump_eeprom; +module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0); +MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* remote control decoder */ +static int (*rc_decode) (struct dvb_usb_device *d, u8 *data, int len, + u32 *event, int *state); +static void *rc_keys; +static int *rc_keys_size; + +u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; + +struct af9005_device_state { + u8 sequence; + int led_state; +}; + +static int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, + u8 *rbuf, u16 rlen, int delay_ms) +{ + int actlen, ret = -ENOMEM; + + if (wbuf == NULL || wlen == 0) + return -EINVAL; + + if ((ret = mutex_lock_interruptible(&d->usb_mutex))) + return ret; + + deb_xfer(">>> "); + debug_dump(wbuf, wlen, deb_xfer); + + ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev, + 2), wbuf, wlen, + &actlen, 2000); + + if (ret) + err("bulk message failed: %d (%d/%d)", ret, wlen, actlen); + else + ret = actlen != wlen ? -1 : 0; + + /* an answer is expected, and no error before */ + if (!ret && rbuf && rlen) { + if (delay_ms) + msleep(delay_ms); + + ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, + 0x01), rbuf, + rlen, &actlen, 2000); + + if (ret) + err("recv bulk message failed: %d", ret); + else { + deb_xfer("<<< "); + debug_dump(rbuf, actlen, deb_xfer); + } + } + + mutex_unlock(&d->usb_mutex); + return ret; +} + +static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, + int readwrite, int type, u8 * values, int len) +{ + struct af9005_device_state *st = d->priv; + u8 obuf[16] = { 0 }; + u8 ibuf[17] = { 0 }; + u8 command; + int i; + int ret; + + if (len < 1) { + err("generic read/write, less than 1 byte. Makes no sense."); + return -EINVAL; + } + if (len > 8) { + err("generic read/write, more than 8 bytes. Not supported."); + return -EINVAL; + } + + obuf[0] = 14; /* rest of buffer length low */ + obuf[1] = 0; /* rest of buffer length high */ + + obuf[2] = AF9005_REGISTER_RW; /* register operation */ + obuf[3] = 12; /* rest of buffer length */ + + obuf[4] = st->sequence++; /* sequence number */ + + obuf[5] = (u8) (reg >> 8); /* register address */ + obuf[6] = (u8) (reg & 0xff); + + if (type == AF9005_OFDM_REG) { + command = AF9005_CMD_OFDM_REG; + } else { + command = AF9005_CMD_TUNER; + } + + if (len > 1) + command |= + AF9005_CMD_BURST | AF9005_CMD_AUTOINC | (len - 1) << 3; + command |= readwrite; + if (readwrite == AF9005_CMD_WRITE) + for (i = 0; i < len; i++) + obuf[8 + i] = values[i]; + else if (type == AF9005_TUNER_REG) + /* read command for tuner, the first byte contains the i2c address */ + obuf[8] = values[0]; + obuf[7] = command; + + ret = af9005_usb_generic_rw(d, obuf, 16, ibuf, 17, 0); + if (ret) + return ret; + + /* sanity check */ + if (ibuf[2] != AF9005_REGISTER_RW_ACK) { + err("generic read/write, wrong reply code."); + return -EIO; + } + if (ibuf[3] != 0x0d) { + err("generic read/write, wrong length in reply."); + return -EIO; + } + if (ibuf[4] != obuf[4]) { + err("generic read/write, wrong sequence in reply."); + return -EIO; + } + /* + Windows driver doesn't check these fields, in fact sometimes + the register in the reply is different that what has been sent + + if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) { + err("generic read/write, wrong register in reply."); + return -EIO; + } + if (ibuf[7] != command) { + err("generic read/write wrong command in reply."); + return -EIO; + } + */ + if (ibuf[16] != 0x01) { + err("generic read/write wrong status code in reply."); + return -EIO; + } + if (readwrite == AF9005_CMD_READ) + for (i = 0; i < len; i++) + values[i] = ibuf[8 + i]; + + return 0; + +} + +int af9005_read_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 * value) +{ + int ret; + deb_reg("read register %x ", reg); + ret = af9005_generic_read_write(d, reg, + AF9005_CMD_READ, AF9005_OFDM_REG, + value, 1); + if (ret) + deb_reg("failed\n"); + else + deb_reg("value %x\n", *value); + return ret; +} + +int af9005_read_ofdm_registers(struct dvb_usb_device *d, u16 reg, + u8 * values, int len) +{ + int ret; + deb_reg("read %d registers %x ", len, reg); + ret = af9005_generic_read_write(d, reg, + AF9005_CMD_READ, AF9005_OFDM_REG, + values, len); + if (ret) + deb_reg("failed\n"); + else + debug_dump(values, len, deb_reg); + return ret; +} + +int af9005_write_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 value) +{ + int ret; + u8 temp = value; + deb_reg("write register %x value %x ", reg, value); + ret = af9005_generic_read_write(d, reg, + AF9005_CMD_WRITE, AF9005_OFDM_REG, + &temp, 1); + if (ret) + deb_reg("failed\n"); + else + deb_reg("ok\n"); + return ret; +} + +int af9005_write_ofdm_registers(struct dvb_usb_device *d, u16 reg, + u8 * values, int len) +{ + int ret; + deb_reg("write %d registers %x values ", len, reg); + debug_dump(values, len, deb_reg); + + ret = af9005_generic_read_write(d, reg, + AF9005_CMD_WRITE, AF9005_OFDM_REG, + values, len); + if (ret) + deb_reg("failed\n"); + else + deb_reg("ok\n"); + return ret; +} + +int af9005_read_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, + u8 len, u8 * value) +{ + u8 temp; + int ret; + deb_reg("read bits %x %x %x", reg, pos, len); + ret = af9005_read_ofdm_register(d, reg, &temp); + if (ret) { + deb_reg(" failed\n"); + return ret; + } + *value = (temp >> pos) & regmask[len - 1]; + deb_reg(" value %x\n", *value); + return 0; + +} + +int af9005_write_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, + u8 len, u8 value) +{ + u8 temp, mask; + int ret; + deb_reg("write bits %x %x %x value %x\n", reg, pos, len, value); + if (pos == 0 && len == 8) + return af9005_write_ofdm_register(d, reg, value); + ret = af9005_read_ofdm_register(d, reg, &temp); + if (ret) + return ret; + mask = regmask[len - 1] << pos; + temp = (temp & ~mask) | ((value << pos) & mask); + return af9005_write_ofdm_register(d, reg, temp); + +} + +static int af9005_usb_read_tuner_registers(struct dvb_usb_device *d, + u16 reg, u8 * values, int len) +{ + return af9005_generic_read_write(d, reg, + AF9005_CMD_READ, AF9005_TUNER_REG, + values, len); +} + +static int af9005_usb_write_tuner_registers(struct dvb_usb_device *d, + u16 reg, u8 * values, int len) +{ + return af9005_generic_read_write(d, reg, + AF9005_CMD_WRITE, + AF9005_TUNER_REG, values, len); +} + +int af9005_write_tuner_registers(struct dvb_usb_device *d, u16 reg, + u8 * values, int len) +{ + /* don't let the name of this function mislead you: it's just used + as an interface from the firmware to the i2c bus. The actual + i2c addresses are contained in the data */ + int ret, i, done = 0, fail = 0; + u8 temp; + ret = af9005_usb_write_tuner_registers(d, reg, values, len); + if (ret) + return ret; + if (reg != 0xffff) { + /* check if write done (0xa40d bit 1) or fail (0xa40d bit 2) */ + for (i = 0; i < 200; i++) { + ret = + af9005_read_ofdm_register(d, + xd_I2C_i2c_m_status_wdat_done, + &temp); + if (ret) + return ret; + done = temp & (regmask[i2c_m_status_wdat_done_len - 1] + << i2c_m_status_wdat_done_pos); + if (done) + break; + fail = temp & (regmask[i2c_m_status_wdat_fail_len - 1] + << i2c_m_status_wdat_fail_pos); + if (fail) + break; + msleep(50); + } + if (i == 200) + return -ETIMEDOUT; + if (fail) { + /* clear write fail bit */ + af9005_write_register_bits(d, + xd_I2C_i2c_m_status_wdat_fail, + i2c_m_status_wdat_fail_pos, + i2c_m_status_wdat_fail_len, + 1); + return -EIO; + } + /* clear write done bit */ + ret = + af9005_write_register_bits(d, + xd_I2C_i2c_m_status_wdat_fail, + i2c_m_status_wdat_done_pos, + i2c_m_status_wdat_done_len, 1); + if (ret) + return ret; + } + return 0; +} + +int af9005_read_tuner_registers(struct dvb_usb_device *d, u16 reg, u8 addr, + u8 * values, int len) +{ + /* don't let the name of this function mislead you: it's just used + as an interface from the firmware to the i2c bus. The actual + i2c addresses are contained in the data */ + int ret, i; + u8 temp, buf[2]; + + buf[0] = addr; /* tuner i2c address */ + buf[1] = values[0]; /* tuner register */ + + values[0] = addr + 0x01; /* i2c read address */ + + if (reg == APO_REG_I2C_RW_SILICON_TUNER) { + /* write tuner i2c address to tuner, 0c00c0 undocumented, found by sniffing */ + ret = af9005_write_tuner_registers(d, 0x00c0, buf, 2); + if (ret) + return ret; + } + + /* send read command to ofsm */ + ret = af9005_usb_read_tuner_registers(d, reg, values, 1); + if (ret) + return ret; + + /* check if read done */ + for (i = 0; i < 200; i++) { + ret = af9005_read_ofdm_register(d, 0xa408, &temp); + if (ret) + return ret; + if (temp & 0x01) + break; + msleep(50); + } + if (i == 200) + return -ETIMEDOUT; + + /* clear read done bit (by writing 1) */ + ret = af9005_write_ofdm_register(d, xd_I2C_i2c_m_data8, 1); + if (ret) + return ret; + + /* get read data (available from 0xa400) */ + for (i = 0; i < len; i++) { + ret = af9005_read_ofdm_register(d, 0xa400 + i, &temp); + if (ret) + return ret; + values[i] = temp; + } + return 0; +} + +static int af9005_i2c_write(struct dvb_usb_device *d, u8 i2caddr, u8 reg, + u8 * data, int len) +{ + int ret, i; + u8 buf[3]; + deb_i2c("i2c_write i2caddr %x, reg %x, len %d data ", i2caddr, + reg, len); + debug_dump(data, len, deb_i2c); + + for (i = 0; i < len; i++) { + buf[0] = i2caddr; + buf[1] = reg + (u8) i; + buf[2] = data[i]; + ret = + af9005_write_tuner_registers(d, + APO_REG_I2C_RW_SILICON_TUNER, + buf, 3); + if (ret) { + deb_i2c("i2c_write failed\n"); + return ret; + } + } + deb_i2c("i2c_write ok\n"); + return 0; +} + +static int af9005_i2c_read(struct dvb_usb_device *d, u8 i2caddr, u8 reg, + u8 * data, int len) +{ + int ret, i; + u8 temp; + deb_i2c("i2c_read i2caddr %x, reg %x, len %d\n ", i2caddr, reg, len); + for (i = 0; i < len; i++) { + temp = reg + i; + ret = + af9005_read_tuner_registers(d, + APO_REG_I2C_RW_SILICON_TUNER, + i2caddr, &temp, 1); + if (ret) { + deb_i2c("i2c_read failed\n"); + return ret; + } + data[i] = temp; + } + deb_i2c("i2c data read: "); + debug_dump(data, len, deb_i2c); + return 0; +} + +static int af9005_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + /* only implements what the mt2060 module does, don't know how + to make it really generic */ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret; + u8 reg, addr; + u8 *value; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + if (num == 2) { + /* reads a single register */ + reg = *msg[0].buf; + addr = msg[0].addr; + value = msg[1].buf; + ret = af9005_i2c_read(d, addr, reg, value, 1); + if (ret == 0) + ret = 2; + } else { + /* write one or more registers */ + reg = msg[0].buf[0]; + addr = msg[0].addr; + value = &msg[0].buf[1]; + ret = af9005_i2c_write(d, addr, reg, value, msg[0].len - 1); + if (ret == 0) + ret = 1; + } + + mutex_unlock(&d->i2c_mutex); + return ret; +} + +static u32 af9005_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm af9005_i2c_algo = { + .master_xfer = af9005_i2c_xfer, + .functionality = af9005_i2c_func, +}; + +int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, + int wlen, u8 * rbuf, int rlen) +{ + struct af9005_device_state *st = d->priv; + + int ret, i, packet_len; + u8 buf[64]; + u8 ibuf[64]; + + if (wlen < 0) { + err("send command, wlen less than 0 bytes. Makes no sense."); + return -EINVAL; + } + if (wlen > 54) { + err("send command, wlen more than 54 bytes. Not supported."); + return -EINVAL; + } + if (rlen > 54) { + err("send command, rlen more than 54 bytes. Not supported."); + return -EINVAL; + } + packet_len = wlen + 5; + buf[0] = (u8) (packet_len & 0xff); + buf[1] = (u8) ((packet_len & 0xff00) >> 8); + + buf[2] = 0x26; /* packet type */ + buf[3] = wlen + 3; + buf[4] = st->sequence++; + buf[5] = command; + buf[6] = wlen; + for (i = 0; i < wlen; i++) + buf[7 + i] = wbuf[i]; + ret = af9005_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0); + if (ret) + return ret; + if (ibuf[2] != 0x27) { + err("send command, wrong reply code."); + return -EIO; + } + if (ibuf[4] != buf[4]) { + err("send command, wrong sequence in reply."); + return -EIO; + } + if (ibuf[5] != 0x01) { + err("send command, wrong status code in reply."); + return -EIO; + } + if (ibuf[6] != rlen) { + err("send command, invalid data length in reply."); + return -EIO; + } + for (i = 0; i < rlen; i++) + rbuf[i] = ibuf[i + 7]; + return 0; +} + +int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, + int len) +{ + struct af9005_device_state *st = d->priv; + u8 obuf[16], ibuf[14]; + int ret, i; + + memset(obuf, 0, sizeof(obuf)); + memset(ibuf, 0, sizeof(ibuf)); + + obuf[0] = 14; /* length of rest of packet low */ + obuf[1] = 0; /* length of rest of packer high */ + + obuf[2] = 0x2a; /* read/write eeprom */ + + obuf[3] = 12; /* size */ + + obuf[4] = st->sequence++; + + obuf[5] = 0; /* read */ + + obuf[6] = len; + obuf[7] = address; + ret = af9005_usb_generic_rw(d, obuf, 16, ibuf, 14, 0); + if (ret) + return ret; + if (ibuf[2] != 0x2b) { + err("Read eeprom, invalid reply code"); + return -EIO; + } + if (ibuf[3] != 10) { + err("Read eeprom, invalid reply length"); + return -EIO; + } + if (ibuf[4] != obuf[4]) { + err("Read eeprom, wrong sequence in reply "); + return -EIO; + } + if (ibuf[5] != 1) { + err("Read eeprom, wrong status in reply "); + return -EIO; + } + for (i = 0; i < len; i++) { + values[i] = ibuf[6 + i]; + } + return 0; +} + +static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply) +{ + u8 buf[FW_BULKOUT_SIZE + 2]; + u16 checksum; + int act_len, i, ret; + memset(buf, 0, sizeof(buf)); + buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); + buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); + switch (type) { + case FW_CONFIG: + buf[2] = 0x11; + buf[3] = 0x04; + buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ + buf[5] = 0x03; + checksum = buf[4] + buf[5]; + buf[6] = (u8) ((checksum >> 8) & 0xff); + buf[7] = (u8) (checksum & 0xff); + break; + case FW_CONFIRM: + buf[2] = 0x11; + buf[3] = 0x04; + buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ + buf[5] = 0x01; + checksum = buf[4] + buf[5]; + buf[6] = (u8) ((checksum >> 8) & 0xff); + buf[7] = (u8) (checksum & 0xff); + break; + case FW_BOOT: + buf[2] = 0x10; + buf[3] = 0x08; + buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ + buf[5] = 0x97; + buf[6] = 0xaa; + buf[7] = 0x55; + buf[8] = 0xa5; + buf[9] = 0x5a; + checksum = 0; + for (i = 4; i <= 9; i++) + checksum += buf[i]; + buf[10] = (u8) ((checksum >> 8) & 0xff); + buf[11] = (u8) (checksum & 0xff); + break; + default: + err("boot packet invalid boot packet type"); + return -EINVAL; + } + deb_fw(">>> "); + debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); + + ret = usb_bulk_msg(udev, + usb_sndbulkpipe(udev, 0x02), + buf, FW_BULKOUT_SIZE + 2, &act_len, 2000); + if (ret) + err("boot packet bulk message failed: %d (%d/%d)", ret, + FW_BULKOUT_SIZE + 2, act_len); + else + ret = act_len != FW_BULKOUT_SIZE + 2 ? -1 : 0; + if (ret) + return ret; + memset(buf, 0, 9); + ret = usb_bulk_msg(udev, + usb_rcvbulkpipe(udev, 0x01), buf, 9, &act_len, 2000); + if (ret) { + err("boot packet recv bulk message failed: %d", ret); + return ret; + } + deb_fw("<<< "); + debug_dump(buf, act_len, deb_fw); + checksum = 0; + switch (type) { + case FW_CONFIG: + if (buf[2] != 0x11) { + err("boot bad config header."); + return -EIO; + } + if (buf[3] != 0x05) { + err("boot bad config size."); + return -EIO; + } + if (buf[4] != 0x00) { + err("boot bad config sequence."); + return -EIO; + } + if (buf[5] != 0x04) { + err("boot bad config subtype."); + return -EIO; + } + for (i = 4; i <= 6; i++) + checksum += buf[i]; + if (buf[7] * 256 + buf[8] != checksum) { + err("boot bad config checksum."); + return -EIO; + } + *reply = buf[6]; + break; + case FW_CONFIRM: + if (buf[2] != 0x11) { + err("boot bad confirm header."); + return -EIO; + } + if (buf[3] != 0x05) { + err("boot bad confirm size."); + return -EIO; + } + if (buf[4] != 0x00) { + err("boot bad confirm sequence."); + return -EIO; + } + if (buf[5] != 0x02) { + err("boot bad confirm subtype."); + return -EIO; + } + for (i = 4; i <= 6; i++) + checksum += buf[i]; + if (buf[7] * 256 + buf[8] != checksum) { + err("boot bad confirm checksum."); + return -EIO; + } + *reply = buf[6]; + break; + case FW_BOOT: + if (buf[2] != 0x10) { + err("boot bad boot header."); + return -EIO; + } + if (buf[3] != 0x05) { + err("boot bad boot size."); + return -EIO; + } + if (buf[4] != 0x00) { + err("boot bad boot sequence."); + return -EIO; + } + if (buf[5] != 0x01) { + err("boot bad boot pattern 01."); + return -EIO; + } + if (buf[6] != 0x10) { + err("boot bad boot pattern 10."); + return -EIO; + } + for (i = 4; i <= 6; i++) + checksum += buf[i]; + if (buf[7] * 256 + buf[8] != checksum) { + err("boot bad boot checksum."); + return -EIO; + } + break; + + } + + return 0; +} + +static int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw) +{ + int i, packets, ret, act_len; + + u8 buf[FW_BULKOUT_SIZE + 2]; + u8 reply; + + ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + if (ret) + return ret; + if (reply != 0x01) { + err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply); + return -EIO; + } + packets = fw->size / FW_BULKOUT_SIZE; + buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); + buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); + for (i = 0; i < packets; i++) { + memcpy(&buf[2], fw->data + i * FW_BULKOUT_SIZE, + FW_BULKOUT_SIZE); + deb_fw(">>> "); + debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); + ret = usb_bulk_msg(udev, + usb_sndbulkpipe(udev, 0x02), + buf, FW_BULKOUT_SIZE + 2, &act_len, 1000); + if (ret) { + err("firmware download failed at packet %d with code %d", i, ret); + return ret; + } + } + ret = af9005_boot_packet(udev, FW_CONFIRM, &reply); + if (ret) + return ret; + if (reply != (u8) (packets & 0xff)) { + err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply); + return -EIO; + } + ret = af9005_boot_packet(udev, FW_BOOT, &reply); + if (ret) + return ret; + ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + if (ret) + return ret; + if (reply != 0x02) { + err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply); + return -EIO; + } + + return 0; + +} + +int af9005_led_control(struct dvb_usb_device *d, int onoff) +{ + struct af9005_device_state *st = d->priv; + int temp, ret; + + if (onoff && dvb_usb_af9005_led) + temp = 1; + else + temp = 0; + if (st->led_state != temp) { + ret = + af9005_write_register_bits(d, xd_p_reg_top_locken1, + reg_top_locken1_pos, + reg_top_locken1_len, temp); + if (ret) + return ret; + ret = + af9005_write_register_bits(d, xd_p_reg_top_lock1, + reg_top_lock1_pos, + reg_top_lock1_len, temp); + if (ret) + return ret; + st->led_state = temp; + } + return 0; +} + +static int af9005_frontend_attach(struct dvb_usb_adapter *adap) +{ + u8 buf[8]; + int i; + + /* without these calls the first commands after downloading + the firmware fail. I put these calls here to simulate + what it is done in dvb-usb-init.c. + */ + struct usb_device *udev = adap->dev->udev; + usb_clear_halt(udev, usb_sndbulkpipe(udev, 2)); + usb_clear_halt(udev, usb_rcvbulkpipe(udev, 1)); + if (dvb_usb_af9005_dump_eeprom) { + printk("EEPROM DUMP\n"); + for (i = 0; i < 255; i += 8) { + af9005_read_eeprom(adap->dev, i, buf, 8); + printk("ADDR %x ", i); + debug_dump(buf, 8, printk); + } + } + adap->fe = af9005_fe_attach(adap->dev); + return 0; +} + +static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) +{ + struct af9005_device_state *st = d->priv; + int ret, len; + + u8 obuf[5]; + u8 ibuf[256]; + + *state = REMOTE_NO_KEY_PRESSED; + if (rc_decode == NULL) { + /* it shouldn't never come here */ + return 0; + } + /* deb_info("rc_query\n"); */ + obuf[0] = 3; /* rest of packet length low */ + obuf[1] = 0; /* rest of packet lentgh high */ + obuf[2] = 0x40; /* read remote */ + obuf[3] = 1; /* rest of packet length */ + obuf[4] = st->sequence++; /* sequence number */ + ret = af9005_usb_generic_rw(d, obuf, 5, ibuf, 256, 0); + if (ret) { + err("rc query failed"); + return ret; + } + if (ibuf[2] != 0x41) { + err("rc query bad header."); + return -EIO; + } + if (ibuf[4] != obuf[4]) { + err("rc query bad sequence."); + return -EIO; + } + len = ibuf[5]; + if (len > 246) { + err("rc query invalid length"); + return -EIO; + } + if (len > 0) { + deb_rc("rc data (%d) ", len); + debug_dump((ibuf + 6), len, deb_rc); + ret = rc_decode(d, &ibuf[6], len, event, state); + if (ret) { + err("rc_decode failed"); + return ret; + } else { + deb_rc("rc_decode state %x event %x\n", *state, *event); + if (*state == REMOTE_KEY_REPEAT) + *event = d->last_event; + } + } + return 0; +} + +static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + + return 0; +} + +static int af9005_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + deb_info("pid filter control onoff %d\n", onoff); + if (onoff) { + ret = + af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); + if (ret) + return ret; + ret = + af9005_write_register_bits(adap->dev, + XD_MP2IF_DMX_CTRL, 1, 1, 1); + if (ret) + return ret; + ret = + af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); + } else + ret = + af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 0); + if (ret) + return ret; + deb_info("pid filter control ok\n"); + return 0; +} + +static int af9005_pid_filter(struct dvb_usb_adapter *adap, int index, + u16 pid, int onoff) +{ + u8 cmd = index & 0x1f; + int ret; + deb_info("set pid filter, index %d, pid %x, onoff %d\n", index, + pid, onoff); + if (onoff) { + /* cannot use it as pid_filter_ctrl since it has to be done + before setting the first pid */ + if (adap->feedcount == 1) { + deb_info("first pid set, enable pid table\n"); + ret = af9005_pid_filter_control(adap, onoff); + if (ret) + return ret; + } + ret = + af9005_write_ofdm_register(adap->dev, + XD_MP2IF_PID_DATA_L, + (u8) (pid & 0xff)); + if (ret) + return ret; + ret = + af9005_write_ofdm_register(adap->dev, + XD_MP2IF_PID_DATA_H, + (u8) (pid >> 8)); + if (ret) + return ret; + cmd |= 0x20 | 0x40; + } else { + if (adap->feedcount == 0) { + deb_info("last pid unset, disable pid table\n"); + ret = af9005_pid_filter_control(adap, onoff); + if (ret) + return ret; + } + } + ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_PID_IDX, cmd); + if (ret) + return ret; + deb_info("set pid ok\n"); + return 0; +} + +static int af9005_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + int ret; + u8 reply; + ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + if (ret) + return ret; + deb_info("result of FW_CONFIG in identify state %d\n", reply); + if (reply == 0x01) + *cold = 1; + else if (reply == 0x02) + *cold = 0; + else + return -EIO; + deb_info("Identify state cold = %d\n", *cold); + return 0; +} + +static struct dvb_usb_device_properties af9005_properties; + +static int af9005_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &af9005_properties, + THIS_MODULE, NULL, adapter_nr); +} + +static struct usb_device_id af9005_usb_table[] = { + {USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9005)}, + {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE)}, + {USB_DEVICE(USB_VID_ANSONIC, USB_PID_ANSONIC_DVBT_USB)}, + {0}, +}; + +MODULE_DEVICE_TABLE(usb, af9005_usb_table); + +static struct dvb_usb_device_properties af9005_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "af9005.fw", + .download_firmware = af9005_download_firmware, + .no_reconnect = 1, + + .size_of_priv = sizeof(struct af9005_device_state), + + .num_adapters = 1, + .adapter = { + { + .caps = + DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = af9005_pid_filter, + /* .pid_filter_ctrl = af9005_pid_filter_control, */ + .frontend_attach = af9005_frontend_attach, + /* .tuner_attach = af9005_tuner_attach, */ + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 10, + .endpoint = 0x04, + .u = { + .bulk = { + .buffersize = 4096, /* actual size seen is 3948 */ + } + } + }, + } + }, + .power_ctrl = af9005_power_ctrl, + .identify_state = af9005_identify_state, + + .i2c_algo = &af9005_i2c_algo, + + .rc_interval = 200, + .rc_key_map = NULL, + .rc_key_map_size = 0, + .rc_query = af9005_rc_query, + + .num_device_descs = 3, + .devices = { + {.name = "Afatech DVB-T USB1.1 stick", + .cold_ids = {&af9005_usb_table[0], NULL}, + .warm_ids = {NULL}, + }, + {.name = "TerraTec Cinergy T USB XE", + .cold_ids = {&af9005_usb_table[1], NULL}, + .warm_ids = {NULL}, + }, + {.name = "Ansonic DVB-T USB1.1 stick", + .cold_ids = {&af9005_usb_table[2], NULL}, + .warm_ids = {NULL}, + }, + {NULL}, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver af9005_usb_driver = { + .name = "dvb_usb_af9005", + .probe = af9005_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = af9005_usb_table, +}; + +/* module stuff */ +static int __init af9005_usb_module_init(void) +{ + int result; + if ((result = usb_register(&af9005_usb_driver))) { + err("usb_register failed. (%d)", result); + return result; + } + rc_decode = symbol_request(af9005_rc_decode); + rc_keys = symbol_request(af9005_rc_keys); + rc_keys_size = symbol_request(af9005_rc_keys_size); + if (rc_decode == NULL || rc_keys == NULL || rc_keys_size == NULL) { + err("af9005_rc_decode function not found, disabling remote"); + af9005_properties.rc_query = NULL; + } else { + af9005_properties.rc_key_map = rc_keys; + af9005_properties.rc_key_map_size = *rc_keys_size; + } + + return 0; +} + +static void __exit af9005_usb_module_exit(void) +{ + /* release rc decode symbols */ + if (rc_decode != NULL) + symbol_put(af9005_rc_decode); + if (rc_keys != NULL) + symbol_put(af9005_rc_keys); + if (rc_keys_size != NULL) + symbol_put(af9005_rc_keys_size); + /* deregister this driver from the USB subsystem */ + usb_deregister(&af9005_usb_driver); +} + +module_init(af9005_usb_module_init); +module_exit(af9005_usb_module_exit); + +MODULE_AUTHOR("Luca Olivetti <luca@ventoso.org>"); +MODULE_DESCRIPTION("Driver for Afatech 9005 DVB-T USB1.1 stick"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); |
