diff options
Diffstat (limited to 'drivers/input/touchscreen/mtouch.c')
| -rw-r--r-- | drivers/input/touchscreen/mtouch.c | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c new file mode 100644 index 0000000..9077228 --- /dev/null +++ b/drivers/input/touchscreen/mtouch.c @@ -0,0 +1,220 @@ +/* + * MicroTouch (3M) serial touchscreen driver + * + * Copyright (c) 2004 Vojtech Pavlik + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * 2005/02/19 Dan Streetman <ddstreet@ieee.org> + * Copied elo.c and edited for MicroTouch protocol + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "MicroTouch serial touchscreen driver" + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define MTOUCH_FORMAT_TABLET_STATUS_BIT 0x80 +#define MTOUCH_FORMAT_TABLET_TOUCH_BIT 0x40 +#define MTOUCH_FORMAT_TABLET_LENGTH 5 +#define MTOUCH_RESPONSE_BEGIN_BYTE 0x01 +#define MTOUCH_RESPONSE_END_BYTE 0x0d + +/* todo: check specs for max length of all responses */ +#define MTOUCH_MAX_LENGTH 16 + +#define MTOUCH_MIN_XC 0 +#define MTOUCH_MAX_XC 0x3fff +#define MTOUCH_MIN_YC 0 +#define MTOUCH_MAX_YC 0x3fff + +#define MTOUCH_GET_XC(data) (((data[2])<<7) | data[1]) +#define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3]) +#define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0]) + +/* + * Per-touchscreen data. + */ + +struct mtouch { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[MTOUCH_MAX_LENGTH]; + char phys[32]; +}; + +static void mtouch_process_format_tablet(struct mtouch *mtouch) +{ + struct input_dev *dev = mtouch->dev; + + if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) { + input_report_abs(dev, ABS_X, MTOUCH_GET_XC(mtouch->data)); + input_report_abs(dev, ABS_Y, MTOUCH_MAX_YC - MTOUCH_GET_YC(mtouch->data)); + input_report_key(dev, BTN_TOUCH, MTOUCH_GET_TOUCHED(mtouch->data)); + input_sync(dev); + + mtouch->idx = 0; + } +} + +static void mtouch_process_response(struct mtouch *mtouch) +{ + if (MTOUCH_RESPONSE_END_BYTE == mtouch->data[mtouch->idx++]) { + /* FIXME - process response */ + mtouch->idx = 0; + } else if (MTOUCH_MAX_LENGTH == mtouch->idx) { + printk(KERN_ERR "mtouch.c: too many response bytes\n"); + mtouch->idx = 0; + } +} + +static irqreturn_t mtouch_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct mtouch* mtouch = serio_get_drvdata(serio); + + mtouch->data[mtouch->idx] = data; + + if (MTOUCH_FORMAT_TABLET_STATUS_BIT & mtouch->data[0]) + mtouch_process_format_tablet(mtouch); + else if (MTOUCH_RESPONSE_BEGIN_BYTE == mtouch->data[0]) + mtouch_process_response(mtouch); + else + printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]); + + return IRQ_HANDLED; +} + +/* + * mtouch_disconnect() is the opposite of mtouch_connect() + */ + +static void mtouch_disconnect(struct serio *serio) +{ + struct mtouch* mtouch = serio_get_drvdata(serio); + + input_get_device(mtouch->dev); + input_unregister_device(mtouch->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(mtouch->dev); + kfree(mtouch); +} + +/* + * mtouch_connect() is the routine that is called when someone adds a + * new serio device that supports MicroTouch (Format Tablet) protocol and registers it as + * an input device. + */ + +static int mtouch_connect(struct serio *serio, struct serio_driver *drv) +{ + struct mtouch *mtouch; + struct input_dev *input_dev; + int err; + + mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!mtouch || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + mtouch->serio = serio; + mtouch->dev = input_dev; + snprintf(mtouch->phys, sizeof(mtouch->phys), "%s/input0", serio->phys); + + input_dev->name = "MicroTouch Serial TouchScreen"; + input_dev->phys = mtouch->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_MICROTOUCH; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0); + input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0); + + serio_set_drvdata(serio, mtouch); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(mtouch->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(mtouch); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id mtouch_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_MICROTOUCH, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, mtouch_serio_ids); + +static struct serio_driver mtouch_drv = { + .driver = { + .name = "mtouch", + }, + .description = DRIVER_DESC, + .id_table = mtouch_serio_ids, + .interrupt = mtouch_interrupt, + .connect = mtouch_connect, + .disconnect = mtouch_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init mtouch_init(void) +{ + return serio_register_driver(&mtouch_drv); +} + +static void __exit mtouch_exit(void) +{ + serio_unregister_driver(&mtouch_drv); +} + +module_init(mtouch_init); +module_exit(mtouch_exit); |
