diff options
Diffstat (limited to 'drivers/i2c/busses/Kconfig')
-rw-r--r-- | drivers/i2c/busses/Kconfig | 763 |
1 files changed, 763 insertions, 0 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig new file mode 100644 index 0000000..2ed0928 --- /dev/null +++ b/drivers/i2c/busses/Kconfig @@ -0,0 +1,763 @@ +# +# Sensor device configuration +# + +menu "I2C Hardware Bus support" + +comment "PC SMBus host controller drivers" + depends on PCI + +config I2C_ALI1535 + tristate "ALI 1535" + depends on PCI + help + If you say yes to this option, support will be included for the SMB + Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB + controller is part of the 7101 device, which is an ACPI-compliant + Power Management Unit (PMU). + + This driver can also be built as a module. If so, the module + will be called i2c-ali1535. + +config I2C_ALI1563 + tristate "ALI 1563" + depends on PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the SMB + Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB + controller is part of the 7101 device, which is an ACPI-compliant + Power Management Unit (PMU). + + This driver can also be built as a module. If so, the module + will be called i2c-ali1563. + +config I2C_ALI15X3 + tristate "ALI 15x3" + depends on PCI + help + If you say yes to this option, support will be included for the + Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces. + + This driver can also be built as a module. If so, the module + will be called i2c-ali15x3. + +config I2C_AMD756 + tristate "AMD 756/766/768/8111 and nVidia nForce" + depends on PCI + help + If you say yes to this option, support will be included for the AMD + 756/766/768 mainboard I2C interfaces. The driver also includes + support for the first (SMBus 1.0) I2C interface of the AMD 8111 and + the nVidia nForce I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-amd756. + +config I2C_AMD756_S4882 + tristate "SMBus multiplexing on the Tyan S4882" + depends on I2C_AMD756 && X86 && EXPERIMENTAL + help + Enabling this option will add specific SMBus support for the Tyan + S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed + over 8 different channels, where the various memory module EEPROMs + and temperature sensors live. Saying yes here will give you access + to these in addition to the trunk. + + This driver can also be built as a module. If so, the module + will be called i2c-amd756-s4882. + +config I2C_AMD8111 + tristate "AMD 8111" + depends on PCI + help + If you say yes to this option, support will be included for the + second (SMBus 2.0) AMD 8111 mainboard I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-amd8111. + +config I2C_I801 + tristate "Intel 82801 (ICH)" + depends on PCI + help + If you say yes to this option, support will be included for the Intel + 801 family of mainboard I2C interfaces. Specifically, the following + versions of the chipset are supported: + 82801AA + 82801AB + 82801BA + 82801CA/CAM + 82801DB + 82801EB/ER (ICH5/ICH5R) + 6300ESB + ICH6 + ICH7 + ESB2 + ICH8 + ICH9 + Tolapai + ICH10 + PCH + + This driver can also be built as a module. If so, the module + will be called i2c-i801. + +config I2C_ISCH + tristate "Intel SCH SMBus 1.0" + depends on PCI + help + Say Y here if you want to use SMBus controller on the Intel SCH + based systems. + + This driver can also be built as a module. If so, the module + will be called i2c-isch. + +config I2C_PIIX4 + tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)" + depends on PCI + help + If you say yes to this option, support will be included for the Intel + PIIX4 family of mainboard I2C interfaces. Specifically, the following + versions of the chipset are supported (note that Serverworks is part + of Broadcom): + Intel PIIX4 + Intel 440MX + ATI IXP200 + ATI IXP300 + ATI IXP400 + ATI SB600 + ATI SB700 + ATI SB800 + Serverworks OSB4 + Serverworks CSB5 + Serverworks CSB6 + Serverworks HT-1000 + SMSC Victory66 + + This driver can also be built as a module. If so, the module + will be called i2c-piix4. + +config I2C_NFORCE2 + tristate "Nvidia nForce2, nForce3 and nForce4" + depends on PCI + help + If you say yes to this option, support will be included for the Nvidia + nForce2, nForce3 and nForce4 families of mainboard I2C interfaces. + + This driver can also be built as a module. If so, the module + will be called i2c-nforce2. + +config I2C_NFORCE2_S4985 + tristate "SMBus multiplexing on the Tyan S4985" + depends on I2C_NFORCE2 && X86 && EXPERIMENTAL + help + Enabling this option will add specific SMBus support for the Tyan + S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed + over 4 different channels, where the various memory module EEPROMs + live. Saying yes here will give you access to these in addition + to the trunk. + + This driver can also be built as a module. If so, the module + will be called i2c-nforce2-s4985. + +config I2C_SIS5595 + tristate "SiS 5595" + depends on PCI + help + If you say yes to this option, support will be included for the + SiS5595 SMBus (a subset of I2C) interface. + + This driver can also be built as a module. If so, the module + will be called i2c-sis5595. + +config I2C_SIS630 + tristate "SiS 630/730" + depends on PCI + help + If you say yes to this option, support will be included for the + SiS630 and SiS730 SMBus (a subset of I2C) interface. + + This driver can also be built as a module. If so, the module + will be called i2c-sis630. + +config I2C_SIS96X + tristate "SiS 96x" + depends on PCI + help + If you say yes to this option, support will be included for the SiS + 96x SMBus (a subset of I2C) interfaces. Specifically, the following + chipsets are supported: + 645/961 + 645DX/961 + 645DX/962 + 648/961 + 650/961 + 735 + 745 + + This driver can also be built as a module. If so, the module + will be called i2c-sis96x. + +config I2C_VIA + tristate "VIA VT82C586B" + depends on PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the VIA + 82C586B I2C interface + + This driver can also be built as a module. If so, the module + will be called i2c-via. + +config I2C_VIAPRO + tristate "VIA VT82C596/82C686/82xx and CX700/VX800/VX820" + depends on PCI + help + If you say yes to this option, support will be included for the VIA + VT82C596 and later SMBus interface. Specifically, the following + chipsets are supported: + VT82C596A/B + VT82C686A/B + VT8231 + VT8233/A + VT8235 + VT8237R/A/S + VT8251 + CX700 + VX800 + VX820 + + This driver can also be built as a module. If so, the module + will be called i2c-viapro. + +comment "Mac SMBus host controller drivers" + depends on PPC_CHRP || PPC_PMAC + +config I2C_HYDRA + tristate "CHRP Apple Hydra Mac I/O I2C interface" + depends on PCI && PPC_CHRP && EXPERIMENTAL + select I2C_ALGOBIT + help + This supports the use of the I2C interface in the Apple Hydra Mac + I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you + have such a machine. + + This support is also available as a module. If so, the module + will be called i2c-hydra. + +config I2C_POWERMAC + tristate "Powermac I2C interface" + depends on PPC_PMAC + default y + help + This exposes the various PowerMac i2c interfaces to the linux i2c + layer and to userland. It is used by various drivers on the PowerMac + platform, and should generally be enabled. + + This support is also available as a module. If so, the module + will be called i2c-powermac. + +comment "I2C system bus drivers (mostly embedded / system-on-chip)" + +config I2C_AT91 + tristate "Atmel AT91 I2C Two-Wire interface (TWI)" + depends on ARCH_AT91 && EXPERIMENTAL && BROKEN + help + This supports the use of the I2C interface on Atmel AT91 + processors. + + This driver is BROKEN because the controller which it uses + will easily trigger RX overrun and TX underrun errors. Using + low I2C clock rates may partially work around those issues + on some systems. Another serious problem is that there is no + documented way to issue repeated START conditions, as needed + to support combined I2C messages. Use the i2c-gpio driver + unless your system can cope with those limitations. + +config I2C_AU1550 + tristate "Au1550/Au1200 SMBus interface" + depends on SOC_AU1550 || SOC_AU1200 + help + If you say yes to this option, support will be included for the + Au1550 and Au1200 SMBus interface. + + This driver can also be built as a module. If so, the module + will be called i2c-au1550. + +config I2C_BLACKFIN_TWI + tristate "Blackfin TWI I2C support" + depends on BLACKFIN + depends on !BF561 && !BF531 && !BF532 && !BF533 + help + This is the I2C bus driver for Blackfin on-chip TWI interface. + + This driver can also be built as a module. If so, the module + will be called i2c-bfin-twi. + +config I2C_BLACKFIN_TWI_CLK_KHZ + int "Blackfin TWI I2C clock (kHz)" + depends on I2C_BLACKFIN_TWI + range 10 400 + default 50 + help + The unit of the TWI clock is kHz. + +config I2C_CPM + tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)" + depends on (CPM1 || CPM2) && OF_I2C + help + This supports the use of the I2C interface on Freescale + processors with CPM1 or CPM2. + + This driver can also be built as a module. If so, the module + will be called i2c-cpm. + +config I2C_DAVINCI + tristate "DaVinci I2C driver" + depends on ARCH_DAVINCI + help + Support for TI DaVinci I2C controller driver. + + This driver can also be built as a module. If so, the module + will be called i2c-davinci. + + Please note that this driver might be needed to bring up other + devices such as DaVinci NIC. + For details please see http://www.ti.com/davinci + +config I2C_GPIO + tristate "GPIO-based bitbanging I2C" + depends on GENERIC_GPIO + select I2C_ALGOBIT + help + This is a very simple bitbanging I2C driver utilizing the + arch-neutral GPIO API to control the SCL and SDA lines. + +config I2C_HIGHLANDER + tristate "Highlander FPGA SMBus interface" + depends on SH_HIGHLANDER + help + If you say yes to this option, support will be included for + the SMBus interface located in the FPGA on various Highlander + boards, particularly the R0P7780LC0011RL and R0P7785LC0011RL + FPGAs. This is wholly unrelated to the SoC I2C. + + This driver can also be built as a module. If so, the module + will be called i2c-highlander. + +config I2C_IBM_IIC + tristate "IBM PPC 4xx on-chip I2C interface" + depends on 4xx + help + Say Y here if you want to use IIC peripheral found on + embedded IBM PPC 4xx based systems. + + This driver can also be built as a module. If so, the module + will be called i2c-ibm_iic. + +config I2C_IOP3XX + tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface" + depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX + help + Say Y here if you want to use the IIC bus controller on + the Intel IOPx3xx I/O Processors or IXP4xx Network Processors. + + This driver can also be built as a module. If so, the module + will be called i2c-iop3xx. + +config I2C_IXP2000 + tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)" + depends on ARCH_IXP2000 + select I2C_ALGOBIT + help + Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based + system and are using GPIO lines for an I2C bus. + + This support is also available as a module. If so, the module + will be called i2c-ixp2000. + + This driver is deprecated and will be dropped soon. Use i2c-gpio + instead. + +config I2C_MPC + tristate "MPC107/824x/85xx/52xx/86xx" + depends on PPC32 + help + If you say yes to this option, support will be included for the + built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and + MPC85xx/MPC8641 family processors. The driver may also work on 52xx + family processors, though interrupts are known not to work. + + This driver can also be built as a module. If so, the module + will be called i2c-mpc. + +config I2C_MV64XXX + tristate "Marvell mv64xxx I2C Controller" + depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + built-in I2C interface on the Marvell 64xxx line of host bridges. + + This driver can also be built as a module. If so, the module + will be called i2c-mv64xxx. + +config I2C_OCORES + tristate "OpenCores I2C Controller" + depends on EXPERIMENTAL + help + If you say yes to this option, support will be included for the + OpenCores I2C controller. For details see + http://www.opencores.org/projects.cgi/web/i2c/overview + + This driver can also be built as a module. If so, the module + will be called i2c-ocores. + +config I2C_OMAP + tristate "OMAP I2C adapter" + depends on ARCH_OMAP + default y if MACH_OMAP_H3 || MACH_OMAP_OSK + help + If you say yes to this option, support will be included for the + I2C interface on the Texas Instruments OMAP1/2 family of processors. + Like OMAP1510/1610/1710/5912 and OMAP242x. + For details see http://www.ti.com/omap. + +config I2C_PASEMI + tristate "PA Semi SMBus interface" + depends on PPC_PASEMI && PCI + help + Supports the PA Semi PWRficient on-chip SMBus interfaces. + +config I2C_PNX + tristate "I2C bus support for Philips PNX targets" + depends on ARCH_PNX4008 + help + This driver supports the Philips IP3204 I2C IP block master and/or + slave controller + + This driver can also be built as a module. If so, the module + will be called i2c-pnx. + +config I2C_PXA + tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)" + depends on EXPERIMENTAL && ARCH_PXA + help + If you have devices in the PXA I2C bus, say yes to this option. + This driver can also be built as a module. If so, the module + will be called i2c-pxa. + +config I2C_PXA_SLAVE + bool "Intel PXA2XX I2C Slave comms support" + depends on I2C_PXA + help + Support I2C slave mode communications on the PXA I2C bus. This + is necessary for systems where the PXA may be a target on the + I2C bus. + +config I2C_AST + tristate "ASPEED AST I2C adapter " +# depends on ARCH_ASPEED + help + If you have devices in the AST I2C bus, say yes to this option. + This driver can also be built as a module. If so, the module + will be called i2c-ast. + +config I2C_AST1070 + tristate "ASPEED AST1070 I2C adapter " + depends on ARCH_AST1070 + help + If you have devices in the AST1070 I2C bus, say yes to this option. + This driver can also be built as a module. If so, the module + will be called i2c-ast. + +config AST_I2C_SLAVE_MODE + bool "AST I2C Slave mode" + depends on I2C_AST + +if AST_I2C_SLAVE_MODE + +choice + prompt "I2C slave config" + default AST_I2C_SLAVE_EEPROM + +config AST_I2C_SLAVE_EEPROM + bool "10 byte EEPROM Device" + help + Support I2C slave mode communications on the AST I2C bus. This + is necessary for systems where the AST may be a target on the + I2C bus. + +config AST_I2C_SLAVE_RDWR + bool "I2C Slave RD/WR via ioctl" + + help + Support I2C slave mode communications on the AST I2C bus. This + is necessary for systems where the AST may be a target on the + I2C bus. + +endchoice + +endif + +config I2C_S3C2410 + tristate "S3C2410 I2C Driver" + depends on ARCH_S3C2410 + help + Say Y here to include support for I2C controller in the + Samsung S3C2410 based System-on-Chip devices. + +config I2C_SH7760 + tristate "Renesas SH7760 I2C Controller" + depends on CPU_SUBTYPE_SH7760 + help + This driver supports the 2 I2C interfaces on the Renesas SH7760. + + This driver can also be built as a module. If so, the module + will be called i2c-sh7760. + +config I2C_SH_MOBILE + tristate "SuperH Mobile I2C Controller" + depends on SUPERH + help + If you say yes to this option, support will be included for the + built-in I2C interface on the Renesas SH-Mobile processor. + + This driver can also be built as a module. If so, the module + will be called i2c-sh_mobile. + +config I2C_SIMTEC + tristate "Simtec Generic I2C interface" + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for + the Simtec Generic I2C interface. This driver is for the + simple I2C bus used on newer Simtec products for general + I2C, such as DDC on the Simtec BBD2016A. + + This driver can also be built as a module. If so, the module + will be called i2c-simtec. + +config I2C_VERSATILE + tristate "ARM Versatile/Realview I2C bus support" + depends on ARCH_VERSATILE || ARCH_REALVIEW + select I2C_ALGOBIT + help + Say yes if you want to support the I2C serial bus on ARMs Versatile + range of platforms. + + This driver can also be built as a module. If so, the module + will be called i2c-versatile. + +comment "External I2C/SMBus adapter drivers" + +config I2C_PARPORT + tristate "Parallel port adapter" + depends on PARPORT + select I2C_ALGOBIT + help + This supports parallel port I2C adapters such as the ones made by + Philips or Velleman, Analog Devices evaluation boards, and more. + Basically any adapter using the parallel port as an I2C bus with + no extra chipset is supported by this driver, or could be. + + This driver is a replacement for (and was inspired by) an older + driver named i2c-philips-par. The new driver supports more devices, + and makes it easier to add support for new devices. + + An adapter type parameter is now mandatory. Please read the file + Documentation/i2c/busses/i2c-parport for details. + + Another driver exists, named i2c-parport-light, which doesn't depend + on the parport driver. This is meant for embedded systems. Don't say + Y here if you intend to say Y or M there. + + This support is also available as a module. If so, the module + will be called i2c-parport. + +config I2C_PARPORT_LIGHT + tristate "Parallel port adapter (light)" + select I2C_ALGOBIT + help + This supports parallel port I2C adapters such as the ones made by + Philips or Velleman, Analog Devices evaluation boards, and more. + Basically any adapter using the parallel port as an I2C bus with + no extra chipset is supported by this driver, or could be. + + This driver is a light version of i2c-parport. It doesn't depend + on the parport driver, and uses direct I/O access instead. This + might be preferred on embedded systems where wasting memory for + the clean but heavy parport handling is not an option. The + drawback is a reduced portability and the impossibility to + daisy-chain other parallel port devices. + + Don't say Y here if you said Y or M to i2c-parport. Saying M to + both is possible but both modules should not be loaded at the same + time. + + This support is also available as a module. If so, the module + will be called i2c-parport-light. + +config I2C_TAOS_EVM + tristate "TAOS evaluation module" + depends on EXPERIMENTAL + select SERIO + select SERIO_SERPORT + default n + help + This supports TAOS evaluation modules on serial port. In order to + use this driver, you will need the inputattach tool, which is part + of the input-utils package. + + If unsure, say N. + + This support is also available as a module. If so, the module + will be called i2c-taos-evm. + +config I2C_TINY_USB + tristate "Tiny-USB adapter" + depends on USB + help + If you say yes to this option, support will be included for the + i2c-tiny-usb, a simple do-it-yourself USB to I2C interface. See + http://www.harbaum.org/till/i2c_tiny_usb for hardware details. + + This driver can also be built as a module. If so, the module + will be called i2c-tiny-usb. + +comment "Graphics adapter I2C/DDC channel drivers" + depends on PCI + +config I2C_VOODOO3 + tristate "Voodoo 3" + depends on PCI + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the + Voodoo 3 I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-voodoo3. + +comment "Other I2C/SMBus bus drivers" + +config I2C_ACORN + tristate "Acorn IOC/IOMD I2C bus support" + depends on ARCH_ACORN + default y + select I2C_ALGOBIT + help + Say yes if you want to support the I2C bus on Acorn platforms. + + If you don't know, say Y. + +config I2C_ELEKTOR + tristate "Elektor ISA card" + depends on ISA && BROKEN_ON_SMP + select I2C_ALGOPCF + help + This supports the PCF8584 ISA bus I2C adapter. Say Y if you own + such an adapter. + + This support is also available as a module. If so, the module + will be called i2c-elektor. + +config I2C_PCA_ISA + tristate "PCA9564 on an ISA bus" + depends on ISA + select I2C_ALGOPCA + default n + help + This driver supports ISA boards using the Philips PCA9564 + parallel bus to I2C bus controller. + + This driver can also be built as a module. If so, the module + will be called i2c-pca-isa. + + This device is almost undetectable and using this driver on a + system which doesn't have this device will result in long + delays when I2C/SMBus chip drivers are loaded (e.g. at boot + time). If unsure, say N. + +config I2C_PCA_PLATFORM + tristate "PCA9564 as platform device" + select I2C_ALGOPCA + default n + help + This driver supports a memory mapped Philips PCA9564 + parallel bus to I2C bus controller. + + This driver can also be built as a module. If so, the module + will be called i2c-pca-platform. + +config I2C_PMCMSP + tristate "PMC MSP I2C TWI Controller" + depends on PMC_MSP + help + This driver supports the PMC TWI controller on MSP devices. + + This driver can also be built as module. If so, the module + will be called i2c-pmcmsp. + +config I2C_SIBYTE + tristate "SiByte SMBus interface" + depends on SIBYTE_SB1xxx_SOC + help + Supports the SiByte SOC on-chip I2C interfaces (2 channels). + +config I2C_STUB + tristate "I2C/SMBus Test Stub" + depends on EXPERIMENTAL && m + default 'n' + help + This module may be useful to developers of SMBus client drivers, + especially for certain kinds of sensor chips. + + If you do build this module, be sure to read the notes and warnings + in <file:Documentation/i2c/i2c-stub>. + + If you don't know what to do here, definitely say N. + +config SCx200_I2C + tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)" + depends on SCx200_GPIO + select I2C_ALGOBIT + help + Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. + + If you don't know what to do here, say N. + + This support is also available as a module. If so, the module + will be called scx200_i2c. + + This driver is deprecated and will be dropped soon. Use i2c-gpio + (or scx200_acb) instead. + +config SCx200_I2C_SCL + int "GPIO pin used for SCL" + depends on SCx200_I2C + default "12" + help + Enter the GPIO pin number used for the SCL signal. This value can + also be specified with a module parameter. + +config SCx200_I2C_SDA + int "GPIO pin used for SDA" + depends on SCx200_I2C + default "13" + help + Enter the GPIO pin number used for the SSA signal. This value can + also be specified with a module parameter. + +config SCx200_ACB + tristate "Geode ACCESS.bus support" + depends on X86_32 && PCI + help + Enable the use of the ACCESS.bus controllers on the Geode SCx200 and + SC1100 processors and the CS5535 and CS5536 Geode companion devices. + + If you don't know what to do here, say N. + + This support is also available as a module. If so, the module + will be called scx200_acb. + +endmenu |