diff options
Diffstat (limited to 'drivers/edac/i82860_edac.c')
| -rw-r--r-- | drivers/edac/i82860_edac.c | 354 |
1 files changed, 354 insertions, 0 deletions
diff --git a/drivers/edac/i82860_edac.c b/drivers/edac/i82860_edac.c new file mode 100644 index 0000000..c0088ba --- /dev/null +++ b/drivers/edac/i82860_edac.c @@ -0,0 +1,354 @@ +/* + * Intel 82860 Memory Controller kernel module + * (C) 2005 Red Hat (http://www.redhat.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Ben Woodard <woodard@redhat.com> + * shamelessly copied from and based upon the edac_i82875 driver + * by Thayne Harbaugh of Linux Networx. (http://lnxi.com) + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include <linux/edac.h> +#include "edac_core.h" + +#define I82860_REVISION " Ver: 2.0.2 " __DATE__ +#define EDAC_MOD_STR "i82860_edac" + +#define i82860_printk(level, fmt, arg...) \ + edac_printk(level, "i82860", fmt, ##arg) + +#define i82860_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "i82860", fmt, ##arg) + +#ifndef PCI_DEVICE_ID_INTEL_82860_0 +#define PCI_DEVICE_ID_INTEL_82860_0 0x2531 +#endif /* PCI_DEVICE_ID_INTEL_82860_0 */ + +#define I82860_MCHCFG 0x50 +#define I82860_GBA 0x60 +#define I82860_GBA_MASK 0x7FF +#define I82860_GBA_SHIFT 24 +#define I82860_ERRSTS 0xC8 +#define I82860_EAP 0xE4 +#define I82860_DERRCTL_STS 0xE2 + +enum i82860_chips { + I82860 = 0, +}; + +struct i82860_dev_info { + const char *ctl_name; +}; + +struct i82860_error_info { + u16 errsts; + u32 eap; + u16 derrsyn; + u16 errsts2; +}; + +static const struct i82860_dev_info i82860_devs[] = { + [I82860] = { + .ctl_name = "i82860"}, +}; + +static struct pci_dev *mci_pdev; /* init dev: in case that AGP code + * has already registered driver + */ +static struct edac_pci_ctl_info *i82860_pci; + +static void i82860_get_error_info(struct mem_ctl_info *mci, + struct i82860_error_info *info) +{ + struct pci_dev *pdev; + + pdev = to_pci_dev(mci->dev); + + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts); + pci_read_config_dword(pdev, I82860_EAP, &info->eap); + pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn); + pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts2); + + pci_write_bits16(pdev, I82860_ERRSTS, 0x0003, 0x0003); + + /* + * If the error is the same for both reads then the first set of reads + * is valid. If there is a change then there is a CE no info and the + * second set of reads is valid and should be UE info. + */ + if (!(info->errsts2 & 0x0003)) + return; + + if ((info->errsts ^ info->errsts2) & 0x0003) { + pci_read_config_dword(pdev, I82860_EAP, &info->eap); + pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn); + } +} + +static int i82860_process_error_info(struct mem_ctl_info *mci, + struct i82860_error_info *info, + int handle_errors) +{ + int row; + + if (!(info->errsts2 & 0x0003)) + return 0; + + if (!handle_errors) + return 1; + + if ((info->errsts ^ info->errsts2) & 0x0003) { + edac_mc_handle_ce_no_info(mci, "UE overwrote CE"); + info->errsts = info->errsts2; + } + + info->eap >>= PAGE_SHIFT; + row = edac_mc_find_csrow_by_page(mci, info->eap); + + if (info->errsts & 0x0002) + edac_mc_handle_ue(mci, info->eap, 0, row, "i82860 UE"); + else + edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row, 0, + "i82860 UE"); + + return 1; +} + +static void i82860_check(struct mem_ctl_info *mci) +{ + struct i82860_error_info info; + + debugf1("MC%d: %s()\n", mci->mc_idx, __func__); + i82860_get_error_info(mci, &info); + i82860_process_error_info(mci, &info, 1); +} + +static void i82860_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev) +{ + unsigned long last_cumul_size; + u16 mchcfg_ddim; /* DRAM Data Integrity Mode 0=none, 2=edac */ + u16 value; + u32 cumul_size; + struct csrow_info *csrow; + int index; + + pci_read_config_word(pdev, I82860_MCHCFG, &mchcfg_ddim); + mchcfg_ddim = mchcfg_ddim & 0x180; + last_cumul_size = 0; + + /* The group row boundary (GRA) reg values are boundary address + * for each DRAM row with a granularity of 16MB. GRA regs are + * cumulative; therefore GRA15 will contain the total memory contained + * in all eight rows. + */ + for (index = 0; index < mci->nr_csrows; index++) { + csrow = &mci->csrows[index]; + pci_read_config_word(pdev, I82860_GBA + index * 2, &value); + cumul_size = (value & I82860_GBA_MASK) << + (I82860_GBA_SHIFT - PAGE_SHIFT); + debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index, + cumul_size); + + if (cumul_size == last_cumul_size) + continue; /* not populated */ + + csrow->first_page = last_cumul_size; + csrow->last_page = cumul_size - 1; + csrow->nr_pages = cumul_size - last_cumul_size; + last_cumul_size = cumul_size; + csrow->grain = 1 << 12; /* I82860_EAP has 4KiB reolution */ + csrow->mtype = MEM_RMBS; + csrow->dtype = DEV_UNKNOWN; + csrow->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE; + } +} + +static int i82860_probe1(struct pci_dev *pdev, int dev_idx) +{ + struct mem_ctl_info *mci; + struct i82860_error_info discard; + + /* RDRAM has channels but these don't map onto the abstractions that + edac uses. + The device groups from the GRA registers seem to map reasonably + well onto the notion of a chip select row. + There are 16 GRA registers and since the name is associated with + the channel and the GRA registers map to physical devices so we are + going to make 1 channel for group. + */ + mci = edac_mc_alloc(0, 16, 1, 0); + + if (!mci) + return -ENOMEM; + + debugf3("%s(): init mci\n", __func__); + mci->dev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + /* I"m not sure about this but I think that all RDRAM is SECDED */ + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = EDAC_MOD_STR; + mci->mod_ver = I82860_REVISION; + mci->ctl_name = i82860_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = i82860_check; + mci->ctl_page_to_phys = NULL; + i82860_init_csrows(mci, pdev); + i82860_get_error_info(mci, &discard); /* clear counters */ + + /* Here we assume that we will never see multiple instances of this + * type of memory controller. The ID is therefore hardcoded to 0. + */ + if (edac_mc_add_mc(mci)) { + debugf3("%s(): failed edac_mc_add_mc()\n", __func__); + goto fail; + } + + /* allocating generic PCI control info */ + i82860_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!i82860_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + /* get this far and it's successful */ + debugf3("%s(): success\n", __func__); + + return 0; + +fail: + edac_mc_free(mci); + return -ENODEV; +} + +/* returns count (>= 0), or negative on error */ +static int __devinit i82860_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc; + + debugf0("%s()\n", __func__); + i82860_printk(KERN_INFO, "i82860 init one\n"); + + if (pci_enable_device(pdev) < 0) + return -EIO; + + rc = i82860_probe1(pdev, ent->driver_data); + + if (rc == 0) + mci_pdev = pci_dev_get(pdev); + + return rc; +} + +static void __devexit i82860_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + debugf0("%s()\n", __func__); + + if (i82860_pci) + edac_pci_release_generic_ctl(i82860_pci); + + if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) + return; + + edac_mc_free(mci); +} + +static const struct pci_device_id i82860_pci_tbl[] __devinitdata = { + { + PCI_VEND_DEV(INTEL, 82860_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + I82860}, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i82860_pci_tbl); + +static struct pci_driver i82860_driver = { + .name = EDAC_MOD_STR, + .probe = i82860_init_one, + .remove = __devexit_p(i82860_remove_one), + .id_table = i82860_pci_tbl, +}; + +static int __init i82860_init(void) +{ + int pci_rc; + + debugf3("%s()\n", __func__); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + if ((pci_rc = pci_register_driver(&i82860_driver)) < 0) + goto fail0; + + if (!mci_pdev) { + mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82860_0, NULL); + + if (mci_pdev == NULL) { + debugf0("860 pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + + pci_rc = i82860_init_one(mci_pdev, i82860_pci_tbl); + + if (pci_rc < 0) { + debugf0("860 init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + + return 0; + +fail1: + pci_unregister_driver(&i82860_driver); + +fail0: + if (mci_pdev != NULL) + pci_dev_put(mci_pdev); + + return pci_rc; +} + +static void __exit i82860_exit(void) +{ + debugf3("%s()\n", __func__); + + pci_unregister_driver(&i82860_driver); + + if (mci_pdev != NULL) + pci_dev_put(mci_pdev); +} + +module_init(i82860_init); +module_exit(i82860_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com) " + "Ben Woodard <woodard@redhat.com>"); +MODULE_DESCRIPTION("ECC support for Intel 82860 memory hub controllers"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); |
