diff options
Diffstat (limited to 'drivers/auxdisplay/Kconfig')
| -rw-r--r-- | drivers/auxdisplay/Kconfig | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig new file mode 100644 index 0000000..14b9d5f --- /dev/null +++ b/drivers/auxdisplay/Kconfig @@ -0,0 +1,123 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# +# Auxiliary display drivers configuration. +# + +menuconfig AUXDISPLAY + depends on PARPORT + bool "Auxiliary Display support" + ---help--- + Say Y here to get to see options for auxiliary display drivers. + This option alone does not add any kernel code. + + If you say N, all options in this submenu will be skipped and disabled. + +if AUXDISPLAY && PARPORT + +config KS0108 + tristate "KS0108 LCD Controller" + depends on PARPORT_PC + default n + ---help--- + If you have a LCD controlled by one or more KS0108 + controllers, say Y. You will need also another more specific + driver for your LCD. + + Depends on Parallel Port support. If you say Y at + parport, you will be able to compile this as a module (M) + and built-in as well (Y). + + To compile this as a module, choose M here: + the module will be called ks0108. + + If unsure, say N. + +config KS0108_PORT + hex "Parallel port where the LCD is connected" + depends on KS0108 + default 0x378 + ---help--- + The address of the parallel port where the LCD is connected. + + The first standard parallel port address is 0x378. + The second standard parallel port address is 0x278. + The third standard parallel port address is 0x3BC. + + You can specify a different address if you need. + + If you don't know what I'm talking about, load the parport module, + and execute "dmesg" or "cat /proc/ioports". You can see there how + many parallel ports are present and which address each one has. + + Usually you only need to use 0x378. + + If you compile this as a module, you can still override this + using the module parameters. + +config KS0108_DELAY + int "Delay between each control writing (microseconds)" + depends on KS0108 + default "2" + ---help--- + Amount of time the ks0108 should wait between each control write + to the parallel port. + + If your LCD seems to miss random writings, increment this. + + If you don't know what I'm talking about, ignore it. + + If you compile this as a module, you can still override this + value using the module parameters. + +config CFAG12864B + tristate "CFAG12864B LCD" + depends on X86 + depends on FB + depends on KS0108 + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + default n + ---help--- + If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series, + say Y. You also need the ks0108 LCD Controller driver. + + For help about how to wire your LCD to the parallel port, + check Documentation/auxdisplay/cfag12864b + + Depends on the x86 arch and the framebuffer support. + + The LCD framebuffer driver can be attached to a console. + It will work fine. However, you can't attach it to the fbdev driver + of the xorg server. + + To compile this as a module, choose M here: + the modules will be called cfag12864b and cfag12864bfb. + + If unsure, say N. + +config CFAG12864B_RATE + int "Refresh rate (hertz)" + depends on CFAG12864B + default "20" + ---help--- + Refresh rate of the LCD. + + As the LCD is not memory mapped, the driver has to make the work by + software. This means you should be careful setting this value higher. + If your CPUs are really slow or you feel the system is slowed down, + decrease the value. + + Be careful modifying this value to a very high value: + You can freeze the computer, or the LCD maybe can't draw as fast as you + are requesting. + + If you don't know what I'm talking about, ignore it. + + If you compile this as a module, you can still override this + value using the module parameters. + +endif # AUXDISPLAY |
