diff options
Diffstat (limited to 'drivers/ata/sata_inic162x.c')
| -rw-r--r-- | drivers/ata/sata_inic162x.c | 935 |
1 files changed, 935 insertions, 0 deletions
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c new file mode 100644 index 0000000..fbbd87c --- /dev/null +++ b/drivers/ata/sata_inic162x.c @@ -0,0 +1,935 @@ +/* + * sata_inic162x.c - Driver for Initio 162x SATA controllers + * + * Copyright 2006 SUSE Linux Products GmbH + * Copyright 2006 Tejun Heo <teheo@novell.com> + * + * This file is released under GPL v2. + * + * This controller is eccentric and easily locks up if something isn't + * right. Documentation is available at initio's website but it only + * documents registers (not programming model). + * + * This driver has interesting history. The first version was written + * from the documentation and a 2.4 IDE driver posted on a Taiwan + * company, which didn't use any IDMA features and couldn't handle + * LBA48. The resulting driver couldn't handle LBA48 devices either + * making it pretty useless. + * + * After a while, initio picked the driver up, renamed it to + * sata_initio162x, updated it to use IDMA for ATA DMA commands and + * posted it on their website. It only used ATA_PROT_DMA for IDMA and + * attaching both devices and issuing IDMA and !IDMA commands + * simultaneously broke it due to PIRQ masking interaction but it did + * show how to use the IDMA (ADMA + some initio specific twists) + * engine. + * + * Then, I picked up their changes again and here's the usable driver + * which uses IDMA for everything. Everything works now including + * LBA48, CD/DVD burning, suspend/resume and hotplug. There are some + * issues tho. Result Tf is not resported properly, NCQ isn't + * supported yet and CD/DVD writing works with DMA assisted PIO + * protocol (which, for native SATA devices, shouldn't cause any + * noticeable difference). + * + * Anyways, so, here's finally a working driver for inic162x. Enjoy! + * + * initio: If you guys wanna improve the driver regarding result TF + * access and other stuff, please feel free to contact me. I'll be + * happy to assist. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/blkdev.h> +#include <scsi/scsi_device.h> + +#define DRV_NAME "sata_inic162x" +#define DRV_VERSION "0.4" + +enum { + MMIO_BAR_PCI = 5, + MMIO_BAR_CARDBUS = 1, + + NR_PORTS = 2, + + IDMA_CPB_TBL_SIZE = 4 * 32, + + INIC_DMA_BOUNDARY = 0xffffff, + + HOST_ACTRL = 0x08, + HOST_CTL = 0x7c, + HOST_STAT = 0x7e, + HOST_IRQ_STAT = 0xbc, + HOST_IRQ_MASK = 0xbe, + + PORT_SIZE = 0x40, + + /* registers for ATA TF operation */ + PORT_TF_DATA = 0x00, + PORT_TF_FEATURE = 0x01, + PORT_TF_NSECT = 0x02, + PORT_TF_LBAL = 0x03, + PORT_TF_LBAM = 0x04, + PORT_TF_LBAH = 0x05, + PORT_TF_DEVICE = 0x06, + PORT_TF_COMMAND = 0x07, + PORT_TF_ALT_STAT = 0x08, + PORT_IRQ_STAT = 0x09, + PORT_IRQ_MASK = 0x0a, + PORT_PRD_CTL = 0x0b, + PORT_PRD_ADDR = 0x0c, + PORT_PRD_XFERLEN = 0x10, + PORT_CPB_CPBLAR = 0x18, + PORT_CPB_PTQFIFO = 0x1c, + + /* IDMA register */ + PORT_IDMA_CTL = 0x14, + PORT_IDMA_STAT = 0x16, + + PORT_RPQ_FIFO = 0x1e, + PORT_RPQ_CNT = 0x1f, + + PORT_SCR = 0x20, + + /* HOST_CTL bits */ + HCTL_LEDEN = (1 << 3), /* enable LED operation */ + HCTL_IRQOFF = (1 << 8), /* global IRQ off */ + HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */ + HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/ + HCTL_PWRDWN = (1 << 12), /* power down PHYs */ + HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */ + HCTL_RPGSEL = (1 << 15), /* register page select */ + + HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST | + HCTL_RPGSEL, + + /* HOST_IRQ_(STAT|MASK) bits */ + HIRQ_PORT0 = (1 << 0), + HIRQ_PORT1 = (1 << 1), + HIRQ_SOFT = (1 << 14), + HIRQ_GLOBAL = (1 << 15), /* STAT only */ + + /* PORT_IRQ_(STAT|MASK) bits */ + PIRQ_OFFLINE = (1 << 0), /* device unplugged */ + PIRQ_ONLINE = (1 << 1), /* device plugged */ + PIRQ_COMPLETE = (1 << 2), /* completion interrupt */ + PIRQ_FATAL = (1 << 3), /* fatal error */ + PIRQ_ATA = (1 << 4), /* ATA interrupt */ + PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */ + PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */ + + PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL, + PIRQ_MASK_DEFAULT = PIRQ_REPLY | PIRQ_ATA, + PIRQ_MASK_FREEZE = 0xff, + + /* PORT_PRD_CTL bits */ + PRD_CTL_START = (1 << 0), + PRD_CTL_WR = (1 << 3), + PRD_CTL_DMAEN = (1 << 7), /* DMA enable */ + + /* PORT_IDMA_CTL bits */ + IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */ + IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */ + IDMA_CTL_GO = (1 << 7), /* IDMA mode go */ + IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */ + + /* PORT_IDMA_STAT bits */ + IDMA_STAT_PERR = (1 << 0), /* PCI ERROR MODE */ + IDMA_STAT_CPBERR = (1 << 1), /* ADMA CPB error */ + IDMA_STAT_LGCY = (1 << 3), /* ADMA legacy */ + IDMA_STAT_UIRQ = (1 << 4), /* ADMA unsolicited irq */ + IDMA_STAT_STPD = (1 << 5), /* ADMA stopped */ + IDMA_STAT_PSD = (1 << 6), /* ADMA pause */ + IDMA_STAT_DONE = (1 << 7), /* ADMA done */ + + IDMA_STAT_ERR = IDMA_STAT_PERR | IDMA_STAT_CPBERR, + + /* CPB Control Flags*/ + CPB_CTL_VALID = (1 << 0), /* CPB valid */ + CPB_CTL_QUEUED = (1 << 1), /* queued command */ + CPB_CTL_DATA = (1 << 2), /* data, rsvd in datasheet */ + CPB_CTL_IEN = (1 << 3), /* PCI interrupt enable */ + CPB_CTL_DEVDIR = (1 << 4), /* device direction control */ + + /* CPB Response Flags */ + CPB_RESP_DONE = (1 << 0), /* ATA command complete */ + CPB_RESP_REL = (1 << 1), /* ATA release */ + CPB_RESP_IGNORED = (1 << 2), /* CPB ignored */ + CPB_RESP_ATA_ERR = (1 << 3), /* ATA command error */ + CPB_RESP_SPURIOUS = (1 << 4), /* ATA spurious interrupt error */ + CPB_RESP_UNDERFLOW = (1 << 5), /* APRD deficiency length error */ + CPB_RESP_OVERFLOW = (1 << 6), /* APRD exccess length error */ + CPB_RESP_CPB_ERR = (1 << 7), /* CPB error flag */ + + /* PRD Control Flags */ + PRD_DRAIN = (1 << 1), /* ignore data excess */ + PRD_CDB = (1 << 2), /* atapi packet command pointer */ + PRD_DIRECT_INTR = (1 << 3), /* direct interrupt */ + PRD_DMA = (1 << 4), /* data transfer method */ + PRD_WRITE = (1 << 5), /* data dir, rsvd in datasheet */ + PRD_IOM = (1 << 6), /* io/memory transfer */ + PRD_END = (1 << 7), /* APRD chain end */ +}; + +/* Comman Parameter Block */ +struct inic_cpb { + u8 resp_flags; /* Response Flags */ + u8 error; /* ATA Error */ + u8 status; /* ATA Status */ + u8 ctl_flags; /* Control Flags */ + __le32 len; /* Total Transfer Length */ + __le32 prd; /* First PRD pointer */ + u8 rsvd[4]; + /* 16 bytes */ + u8 feature; /* ATA Feature */ + u8 hob_feature; /* ATA Ex. Feature */ + u8 device; /* ATA Device/Head */ + u8 mirctl; /* Mirror Control */ + u8 nsect; /* ATA Sector Count */ + u8 hob_nsect; /* ATA Ex. Sector Count */ + u8 lbal; /* ATA Sector Number */ + u8 hob_lbal; /* ATA Ex. Sector Number */ + u8 lbam; /* ATA Cylinder Low */ + u8 hob_lbam; /* ATA Ex. Cylinder Low */ + u8 lbah; /* ATA Cylinder High */ + u8 hob_lbah; /* ATA Ex. Cylinder High */ + u8 command; /* ATA Command */ + u8 ctl; /* ATA Control */ + u8 slave_error; /* Slave ATA Error */ + u8 slave_status; /* Slave ATA Status */ + /* 32 bytes */ +} __packed; + +/* Physical Region Descriptor */ +struct inic_prd { + __le32 mad; /* Physical Memory Address */ + __le16 len; /* Transfer Length */ + u8 rsvd; + u8 flags; /* Control Flags */ +} __packed; + +struct inic_pkt { + struct inic_cpb cpb; + struct inic_prd prd[LIBATA_MAX_PRD + 1]; /* + 1 for cdb */ + u8 cdb[ATAPI_CDB_LEN]; +} __packed; + +struct inic_host_priv { + void __iomem *mmio_base; + u16 cached_hctl; +}; + +struct inic_port_priv { + struct inic_pkt *pkt; + dma_addr_t pkt_dma; + u32 *cpb_tbl; + dma_addr_t cpb_tbl_dma; +}; + +static struct scsi_host_template inic_sht = { + ATA_BASE_SHT(DRV_NAME), + .sg_tablesize = LIBATA_MAX_PRD, /* maybe it can be larger? */ + .dma_boundary = INIC_DMA_BOUNDARY, +}; + +static const int scr_map[] = { + [SCR_STATUS] = 0, + [SCR_ERROR] = 1, + [SCR_CONTROL] = 2, +}; + +static void __iomem *inic_port_base(struct ata_port *ap) +{ + struct inic_host_priv *hpriv = ap->host->private_data; + + return hpriv->mmio_base + ap->port_no * PORT_SIZE; +} + +static void inic_reset_port(void __iomem *port_base) +{ + void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; + + /* stop IDMA engine */ + readw(idma_ctl); /* flush */ + msleep(1); + + /* mask IRQ and assert reset */ + writew(IDMA_CTL_RST_IDMA, idma_ctl); + readw(idma_ctl); /* flush */ + msleep(1); + + /* release reset */ + writew(0, idma_ctl); + + /* clear irq */ + writeb(0xff, port_base + PORT_IRQ_STAT); +} + +static int inic_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val) +{ + void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR; + void __iomem *addr; + + if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) + return -EINVAL; + + addr = scr_addr + scr_map[sc_reg] * 4; + *val = readl(scr_addr + scr_map[sc_reg] * 4); + + /* this controller has stuck DIAG.N, ignore it */ + if (sc_reg == SCR_ERROR) + *val &= ~SERR_PHYRDY_CHG; + return 0; +} + +static int inic_scr_write(struct ata_link *link, unsigned sc_reg, u32 val) +{ + void __iomem *scr_addr = inic_port_base(link->ap) + PORT_SCR; + + if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) + return -EINVAL; + + writel(val, scr_addr + scr_map[sc_reg] * 4); + return 0; +} + +static void inic_stop_idma(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + + readb(port_base + PORT_RPQ_FIFO); + readb(port_base + PORT_RPQ_CNT); + writew(0, port_base + PORT_IDMA_CTL); +} + +static void inic_host_err_intr(struct ata_port *ap, u8 irq_stat, u16 idma_stat) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + struct inic_port_priv *pp = ap->private_data; + struct inic_cpb *cpb = &pp->pkt->cpb; + bool freeze = false; + + ata_ehi_clear_desc(ehi); + ata_ehi_push_desc(ehi, "irq_stat=0x%x idma_stat=0x%x", + irq_stat, idma_stat); + + inic_stop_idma(ap); + + if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) { + ata_ehi_push_desc(ehi, "hotplug"); + ata_ehi_hotplugged(ehi); + freeze = true; + } + + if (idma_stat & IDMA_STAT_PERR) { + ata_ehi_push_desc(ehi, "PCI error"); + freeze = true; + } + + if (idma_stat & IDMA_STAT_CPBERR) { + ata_ehi_push_desc(ehi, "CPB error"); + + if (cpb->resp_flags & CPB_RESP_IGNORED) { + __ata_ehi_push_desc(ehi, " ignored"); + ehi->err_mask |= AC_ERR_INVALID; + freeze = true; + } + + if (cpb->resp_flags & CPB_RESP_ATA_ERR) + ehi->err_mask |= AC_ERR_DEV; + + if (cpb->resp_flags & CPB_RESP_SPURIOUS) { + __ata_ehi_push_desc(ehi, " spurious-intr"); + ehi->err_mask |= AC_ERR_HSM; + freeze = true; + } + + if (cpb->resp_flags & + (CPB_RESP_UNDERFLOW | CPB_RESP_OVERFLOW)) { + __ata_ehi_push_desc(ehi, " data-over/underflow"); + ehi->err_mask |= AC_ERR_HSM; + freeze = true; + } + } + + if (freeze) + ata_port_freeze(ap); + else + ata_port_abort(ap); +} + +static void inic_host_intr(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); + u8 irq_stat; + u16 idma_stat; + + /* read and clear IRQ status */ + irq_stat = readb(port_base + PORT_IRQ_STAT); + writeb(irq_stat, port_base + PORT_IRQ_STAT); + idma_stat = readw(port_base + PORT_IDMA_STAT); + + if (unlikely((irq_stat & PIRQ_ERR) || (idma_stat & IDMA_STAT_ERR))) + inic_host_err_intr(ap, irq_stat, idma_stat); + + if (unlikely(!qc)) + goto spurious; + + if (likely(idma_stat & IDMA_STAT_DONE)) { + inic_stop_idma(ap); + + /* Depending on circumstances, device error + * isn't reported by IDMA, check it explicitly. + */ + if (unlikely(readb(port_base + PORT_TF_COMMAND) & + (ATA_DF | ATA_ERR))) + qc->err_mask |= AC_ERR_DEV; + + ata_qc_complete(qc); + return; + } + + spurious: + ata_port_printk(ap, KERN_WARNING, "unhandled interrupt: " + "cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n", + qc ? qc->tf.command : 0xff, irq_stat, idma_stat); +} + +static irqreturn_t inic_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct inic_host_priv *hpriv = host->private_data; + u16 host_irq_stat; + int i, handled = 0;; + + host_irq_stat = readw(hpriv->mmio_base + HOST_IRQ_STAT); + + if (unlikely(!(host_irq_stat & HIRQ_GLOBAL))) + goto out; + + spin_lock(&host->lock); + + for (i = 0; i < NR_PORTS; i++) { + struct ata_port *ap = host->ports[i]; + + if (!(host_irq_stat & (HIRQ_PORT0 << i))) + continue; + + if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) { + inic_host_intr(ap); + handled++; + } else { + if (ata_ratelimit()) + dev_printk(KERN_ERR, host->dev, "interrupt " + "from disabled port %d (0x%x)\n", + i, host_irq_stat); + } + } + + spin_unlock(&host->lock); + + out: + return IRQ_RETVAL(handled); +} + +static int inic_check_atapi_dma(struct ata_queued_cmd *qc) +{ + /* For some reason ATAPI_PROT_DMA doesn't work for some + * commands including writes and other misc ops. Use PIO + * protocol instead, which BTW is driven by the DMA engine + * anyway, so it shouldn't make much difference for native + * SATA devices. + */ + if (atapi_cmd_type(qc->cdb[0]) == READ) + return 0; + return 1; +} + +static void inic_fill_sg(struct inic_prd *prd, struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + unsigned int si; + u8 flags = 0; + + if (qc->tf.flags & ATA_TFLAG_WRITE) + flags |= PRD_WRITE; + + if (ata_is_dma(qc->tf.protocol)) + flags |= PRD_DMA; + + for_each_sg(qc->sg, sg, qc->n_elem, si) { + prd->mad = cpu_to_le32(sg_dma_address(sg)); + prd->len = cpu_to_le16(sg_dma_len(sg)); + prd->flags = flags; + prd++; + } + + WARN_ON(!si); + prd[-1].flags |= PRD_END; +} + +static void inic_qc_prep(struct ata_queued_cmd *qc) +{ + struct inic_port_priv *pp = qc->ap->private_data; + struct inic_pkt *pkt = pp->pkt; + struct inic_cpb *cpb = &pkt->cpb; + struct inic_prd *prd = pkt->prd; + bool is_atapi = ata_is_atapi(qc->tf.protocol); + bool is_data = ata_is_data(qc->tf.protocol); + unsigned int cdb_len = 0; + + VPRINTK("ENTER\n"); + + if (is_atapi) + cdb_len = qc->dev->cdb_len; + + /* prepare packet, based on initio driver */ + memset(pkt, 0, sizeof(struct inic_pkt)); + + cpb->ctl_flags = CPB_CTL_VALID | CPB_CTL_IEN; + if (is_atapi || is_data) + cpb->ctl_flags |= CPB_CTL_DATA; + + cpb->len = cpu_to_le32(qc->nbytes + cdb_len); + cpb->prd = cpu_to_le32(pp->pkt_dma + offsetof(struct inic_pkt, prd)); + + cpb->device = qc->tf.device; + cpb->feature = qc->tf.feature; + cpb->nsect = qc->tf.nsect; + cpb->lbal = qc->tf.lbal; + cpb->lbam = qc->tf.lbam; + cpb->lbah = qc->tf.lbah; + + if (qc->tf.flags & ATA_TFLAG_LBA48) { + cpb->hob_feature = qc->tf.hob_feature; + cpb->hob_nsect = qc->tf.hob_nsect; + cpb->hob_lbal = qc->tf.hob_lbal; + cpb->hob_lbam = qc->tf.hob_lbam; + cpb->hob_lbah = qc->tf.hob_lbah; + } + + cpb->command = qc->tf.command; + /* don't load ctl - dunno why. it's like that in the initio driver */ + + /* setup PRD for CDB */ + if (is_atapi) { + memcpy(pkt->cdb, qc->cdb, ATAPI_CDB_LEN); + prd->mad = cpu_to_le32(pp->pkt_dma + + offsetof(struct inic_pkt, cdb)); + prd->len = cpu_to_le16(cdb_len); + prd->flags = PRD_CDB | PRD_WRITE; + if (!is_data) + prd->flags |= PRD_END; + prd++; + } + + /* setup sg table */ + if (is_data) + inic_fill_sg(prd, qc); + + pp->cpb_tbl[0] = pp->pkt_dma; +} + +static unsigned int inic_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_base = inic_port_base(ap); + + /* fire up the ADMA engine */ + writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL); + writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL); + writeb(0, port_base + PORT_CPB_PTQFIFO); + + return 0; +} + +static void inic_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + void __iomem *port_base = inic_port_base(ap); + + tf->feature = readb(port_base + PORT_TF_FEATURE); + tf->nsect = readb(port_base + PORT_TF_NSECT); + tf->lbal = readb(port_base + PORT_TF_LBAL); + tf->lbam = readb(port_base + PORT_TF_LBAM); + tf->lbah = readb(port_base + PORT_TF_LBAH); + tf->device = readb(port_base + PORT_TF_DEVICE); + tf->command = readb(port_base + PORT_TF_COMMAND); +} + +static bool inic_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *rtf = &qc->result_tf; + struct ata_taskfile tf; + + /* FIXME: Except for status and error, result TF access + * doesn't work. I tried reading from BAR0/2, CPB and BAR5. + * None works regardless of which command interface is used. + * For now return true iff status indicates device error. + * This means that we're reporting bogus sector for RW + * failures. Eeekk.... + */ + inic_tf_read(qc->ap, &tf); + + if (!(tf.command & ATA_ERR)) + return false; + + rtf->command = tf.command; + rtf->feature = tf.feature; + return true; +} + +static void inic_freeze(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + + writeb(PIRQ_MASK_FREEZE, port_base + PORT_IRQ_MASK); + writeb(0xff, port_base + PORT_IRQ_STAT); +} + +static void inic_thaw(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + + writeb(0xff, port_base + PORT_IRQ_STAT); + writeb(PIRQ_MASK_DEFAULT, port_base + PORT_IRQ_MASK); +} + +static int inic_check_ready(struct ata_link *link) +{ + void __iomem *port_base = inic_port_base(link->ap); + + return ata_check_ready(readb(port_base + PORT_TF_COMMAND)); +} + +/* + * SRST and SControl hardreset don't give valid signature on this + * controller. Only controller specific hardreset mechanism works. + */ +static int inic_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *port_base = inic_port_base(ap); + void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + int rc; + + /* hammer it into sane state */ + inic_reset_port(port_base); + + writew(IDMA_CTL_RST_ATA, idma_ctl); + readw(idma_ctl); /* flush */ + msleep(1); + writew(0, idma_ctl); + + rc = sata_link_resume(link, timing, deadline); + if (rc) { + ata_link_printk(link, KERN_WARNING, "failed to resume " + "link after reset (errno=%d)\n", rc); + return rc; + } + + *class = ATA_DEV_NONE; + if (ata_link_online(link)) { + struct ata_taskfile tf; + + /* wait for link to become ready */ + rc = ata_wait_after_reset(link, deadline, inic_check_ready); + /* link occupied, -ENODEV too is an error */ + if (rc) { + ata_link_printk(link, KERN_WARNING, "device not ready " + "after hardreset (errno=%d)\n", rc); + return rc; + } + + inic_tf_read(ap, &tf); + *class = ata_dev_classify(&tf); + } + + return 0; +} + +static void inic_error_handler(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + + inic_reset_port(port_base); + ata_std_error_handler(ap); +} + +static void inic_post_internal_cmd(struct ata_queued_cmd *qc) +{ + /* make DMA engine forget about the failed command */ + if (qc->flags & ATA_QCFLAG_FAILED) + inic_reset_port(inic_port_base(qc->ap)); +} + +static void init_port(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + struct inic_port_priv *pp = ap->private_data; + + /* clear packet and CPB table */ + memset(pp->pkt, 0, sizeof(struct inic_pkt)); + memset(pp->cpb_tbl, 0, IDMA_CPB_TBL_SIZE); + + /* setup PRD and CPB lookup table addresses */ + writel(ap->prd_dma, port_base + PORT_PRD_ADDR); + writel(pp->cpb_tbl_dma, port_base + PORT_CPB_CPBLAR); +} + +static int inic_port_resume(struct ata_port *ap) +{ + init_port(ap); + return 0; +} + +static int inic_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct inic_port_priv *pp; + int rc; + + /* alloc and initialize private data */ + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + ap->private_data = pp; + + /* Alloc resources */ + rc = ata_port_start(ap); + if (rc) + return rc; + + pp->pkt = dmam_alloc_coherent(dev, sizeof(struct inic_pkt), + &pp->pkt_dma, GFP_KERNEL); + if (!pp->pkt) + return -ENOMEM; + + pp->cpb_tbl = dmam_alloc_coherent(dev, IDMA_CPB_TBL_SIZE, + &pp->cpb_tbl_dma, GFP_KERNEL); + if (!pp->cpb_tbl) + return -ENOMEM; + + init_port(ap); + + return 0; +} + +static struct ata_port_operations inic_port_ops = { + .inherits = &sata_port_ops, + + .check_atapi_dma = inic_check_atapi_dma, + .qc_prep = inic_qc_prep, + .qc_issue = inic_qc_issue, + .qc_fill_rtf = inic_qc_fill_rtf, + + .freeze = inic_freeze, + .thaw = inic_thaw, + .hardreset = inic_hardreset, + .error_handler = inic_error_handler, + .post_internal_cmd = inic_post_internal_cmd, + + .scr_read = inic_scr_read, + .scr_write = inic_scr_write, + + .port_resume = inic_port_resume, + .port_start = inic_port_start, +}; + +static struct ata_port_info inic_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA6, + .port_ops = &inic_port_ops +}; + +static int init_controller(void __iomem *mmio_base, u16 hctl) +{ + int i; + u16 val; + + hctl &= ~HCTL_KNOWN_BITS; + + /* Soft reset whole controller. Spec says reset duration is 3 + * PCI clocks, be generous and give it 10ms. + */ + writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL); + readw(mmio_base + HOST_CTL); /* flush */ + + for (i = 0; i < 10; i++) { + msleep(1); + val = readw(mmio_base + HOST_CTL); + if (!(val & HCTL_SOFTRST)) + break; + } + + if (val & HCTL_SOFTRST) + return -EIO; + + /* mask all interrupts and reset ports */ + for (i = 0; i < NR_PORTS; i++) { + void __iomem *port_base = mmio_base + i * PORT_SIZE; + + writeb(0xff, port_base + PORT_IRQ_MASK); + inic_reset_port(port_base); + } + + /* port IRQ is masked now, unmask global IRQ */ + writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL); + val = readw(mmio_base + HOST_IRQ_MASK); + val &= ~(HIRQ_PORT0 | HIRQ_PORT1); + writew(val, mmio_base + HOST_IRQ_MASK); + + return 0; +} + +#ifdef CONFIG_PM +static int inic_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct inic_host_priv *hpriv = host->private_data; + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl); + if (rc) + return rc; + } + + ata_host_resume(host); + + return 0; +} +#endif + +static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + const struct ata_port_info *ppi[] = { &inic_port_info, NULL }; + struct ata_host *host; + struct inic_host_priv *hpriv; + void __iomem * const *iomap; + int mmio_bar; + int i, rc; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + /* alloc host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS); + hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); + if (!host || !hpriv) + return -ENOMEM; + + host->private_data = hpriv; + + /* Acquire resources and fill host. Note that PCI and cardbus + * use different BARs. + */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (pci_resource_flags(pdev, MMIO_BAR_PCI) & IORESOURCE_MEM) + mmio_bar = MMIO_BAR_PCI; + else + mmio_bar = MMIO_BAR_CARDBUS; + + rc = pcim_iomap_regions(pdev, 1 << mmio_bar, DRV_NAME); + if (rc) + return rc; + host->iomap = iomap = pcim_iomap_table(pdev); + hpriv->mmio_base = iomap[mmio_bar]; + hpriv->cached_hctl = readw(hpriv->mmio_base + HOST_CTL); + + for (i = 0; i < NR_PORTS; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_pbar_desc(ap, mmio_bar, -1, "mmio"); + ata_port_pbar_desc(ap, mmio_bar, i * PORT_SIZE, "port"); + } + + /* Set dma_mask. This devices doesn't support 64bit addressing. */ + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); + return rc; + } + + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + + /* + * This controller is braindamaged. dma_boundary is 0xffff + * like others but it will lock up the whole machine HARD if + * 65536 byte PRD entry is fed. Reduce maximum segment size. + */ + rc = pci_set_dma_max_seg_size(pdev, 65536 - 512); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "failed to set the maximum segment size.\n"); + return rc; + } + + rc = init_controller(hpriv->mmio_base, hpriv->cached_hctl); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "failed to initialize controller\n"); + return rc; + } + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED, + &inic_sht); +} + +static const struct pci_device_id inic_pci_tbl[] = { + { PCI_VDEVICE(INIT, 0x1622), }, + { }, +}; + +static struct pci_driver inic_pci_driver = { + .name = DRV_NAME, + .id_table = inic_pci_tbl, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = inic_pci_device_resume, +#endif + .probe = inic_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init inic_init(void) +{ + return pci_register_driver(&inic_pci_driver); +} + +static void __exit inic_exit(void) +{ + pci_unregister_driver(&inic_pci_driver); +} + +MODULE_AUTHOR("Tejun Heo"); +MODULE_DESCRIPTION("low-level driver for Initio 162x SATA"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(pci, inic_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(inic_init); +module_exit(inic_exit); |
