summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/kernel/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/kernel/setup.c')
-rw-r--r--arch/blackfin/kernel/setup.c1183
1 files changed, 1183 insertions, 0 deletions
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
new file mode 100644
index 0000000..71a9a8c
--- /dev/null
+++ b/arch/blackfin/kernel/setup.c
@@ -0,0 +1,1183 @@
+/*
+ * arch/blackfin/kernel/setup.c
+ *
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/pfn.h>
+
+#include <linux/ext2_fs.h>
+#include <linux/cramfs_fs.h>
+#include <linux/romfs_fs.h>
+
+#include <asm/cplb.h>
+#include <asm/cacheflush.h>
+#include <asm/blackfin.h>
+#include <asm/cplbinit.h>
+#include <asm/div64.h>
+#include <asm/fixed_code.h>
+#include <asm/early_printk.h>
+
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
+
+u16 _bfin_swrst;
+EXPORT_SYMBOL(_bfin_swrst);
+
+unsigned long memory_start, memory_end, physical_mem_end;
+unsigned long _rambase, _ramstart, _ramend;
+unsigned long reserved_mem_dcache_on;
+unsigned long reserved_mem_icache_on;
+EXPORT_SYMBOL(memory_start);
+EXPORT_SYMBOL(memory_end);
+EXPORT_SYMBOL(physical_mem_end);
+EXPORT_SYMBOL(_ramend);
+EXPORT_SYMBOL(reserved_mem_dcache_on);
+
+#ifdef CONFIG_MTD_UCLINUX
+unsigned long memory_mtd_end, memory_mtd_start, mtd_size;
+unsigned long _ebss;
+EXPORT_SYMBOL(memory_mtd_end);
+EXPORT_SYMBOL(memory_mtd_start);
+EXPORT_SYMBOL(mtd_size);
+#endif
+
+char __initdata command_line[COMMAND_LINE_SIZE];
+void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat,
+ *init_saved_icplb_fault_addr, *init_saved_dcplb_fault_addr;
+
+/* boot memmap, for parsing "memmap=" */
+#define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */
+#define BFIN_MEMMAP_RAM 1
+#define BFIN_MEMMAP_RESERVED 2
+struct bfin_memmap {
+ int nr_map;
+ struct bfin_memmap_entry {
+ unsigned long long addr; /* start of memory segment */
+ unsigned long long size;
+ unsigned long type;
+ } map[BFIN_MEMMAP_MAX];
+} bfin_memmap __initdata;
+
+/* for memmap sanitization */
+struct change_member {
+ struct bfin_memmap_entry *pentry; /* pointer to original entry */
+ unsigned long long addr; /* address for this change point */
+};
+static struct change_member change_point_list[2*BFIN_MEMMAP_MAX] __initdata;
+static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata;
+static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
+static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
+
+void __init bfin_cache_init(void)
+{
+#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
+ generate_cplb_tables();
+#endif
+
+#ifdef CONFIG_BFIN_ICACHE
+ bfin_icache_init();
+ printk(KERN_INFO "Instruction Cache Enabled\n");
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+ bfin_dcache_init();
+ printk(KERN_INFO "Data Cache Enabled"
+# if defined CONFIG_BFIN_WB
+ " (write-back)"
+# elif defined CONFIG_BFIN_WT
+ " (write-through)"
+# endif
+ "\n");
+#endif
+}
+
+void __init bfin_relocate_l1_mem(void)
+{
+ unsigned long l1_code_length;
+ unsigned long l1_data_a_length;
+ unsigned long l1_data_b_length;
+ unsigned long l2_length;
+
+ l1_code_length = _etext_l1 - _stext_l1;
+ if (l1_code_length > L1_CODE_LENGTH)
+ panic("L1 Instruction SRAM Overflow\n");
+ /* cannot complain as printk is not available as yet.
+ * But we can continue booting and complain later!
+ */
+
+ /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
+ dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
+
+ l1_data_a_length = _sbss_l1 - _sdata_l1;
+ if (l1_data_a_length > L1_DATA_A_LENGTH)
+ panic("L1 Data SRAM Bank A Overflow\n");
+
+ /* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
+ dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
+
+ l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
+ if (l1_data_b_length > L1_DATA_B_LENGTH)
+ panic("L1 Data SRAM Bank B Overflow\n");
+
+ /* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
+ dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
+ l1_data_a_length, l1_data_b_length);
+
+ if (L2_LENGTH != 0) {
+ l2_length = _sbss_l2 - _stext_l2;
+ if (l2_length > L2_LENGTH)
+ panic("L2 SRAM Overflow\n");
+
+ /* Copy _stext_l2 to _edata_l2 to L2 SRAM */
+ dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+ }
+}
+
+/* add_memory_region to memmap */
+static void __init add_memory_region(unsigned long long start,
+ unsigned long long size, int type)
+{
+ int i;
+
+ i = bfin_memmap.nr_map;
+
+ if (i == BFIN_MEMMAP_MAX) {
+ printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+ return;
+ }
+
+ bfin_memmap.map[i].addr = start;
+ bfin_memmap.map[i].size = size;
+ bfin_memmap.map[i].type = type;
+ bfin_memmap.nr_map++;
+}
+
+/*
+ * Sanitize the boot memmap, removing overlaps.
+ */
+static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map)
+{
+ struct change_member *change_tmp;
+ unsigned long current_type, last_type;
+ unsigned long long last_addr;
+ int chgidx, still_changing;
+ int overlap_entries;
+ int new_entry;
+ int old_nr, new_nr, chg_nr;
+ int i;
+
+ /*
+ Visually we're performing the following (1,2,3,4 = memory types)
+
+ Sample memory map (w/overlaps):
+ ____22__________________
+ ______________________4_
+ ____1111________________
+ _44_____________________
+ 11111111________________
+ ____________________33__
+ ___________44___________
+ __________33333_________
+ ______________22________
+ ___________________2222_
+ _________111111111______
+ _____________________11_
+ _________________4______
+
+ Sanitized equivalent (no overlap):
+ 1_______________________
+ _44_____________________
+ ___1____________________
+ ____22__________________
+ ______11________________
+ _________1______________
+ __________3_____________
+ ___________44___________
+ _____________33_________
+ _______________2________
+ ________________1_______
+ _________________4______
+ ___________________2____
+ ____________________33__
+ ______________________4_
+ */
+ /* if there's only one memory region, don't bother */
+ if (*pnr_map < 2)
+ return -1;
+
+ old_nr = *pnr_map;
+
+ /* bail out if we find any unreasonable addresses in memmap */
+ for (i = 0; i < old_nr; i++)
+ if (map[i].addr + map[i].size < map[i].addr)
+ return -1;
+
+ /* create pointers for initial change-point information (for sorting) */
+ for (i = 0; i < 2*old_nr; i++)
+ change_point[i] = &change_point_list[i];
+
+ /* record all known change-points (starting and ending addresses),
+ omitting those that are for empty memory regions */
+ chgidx = 0;
+ for (i = 0; i < old_nr; i++) {
+ if (map[i].size != 0) {
+ change_point[chgidx]->addr = map[i].addr;
+ change_point[chgidx++]->pentry = &map[i];
+ change_point[chgidx]->addr = map[i].addr + map[i].size;
+ change_point[chgidx++]->pentry = &map[i];
+ }
+ }
+ chg_nr = chgidx; /* true number of change-points */
+
+ /* sort change-point list by memory addresses (low -> high) */
+ still_changing = 1;
+ while (still_changing) {
+ still_changing = 0;
+ for (i = 1; i < chg_nr; i++) {
+ /* if <current_addr> > <last_addr>, swap */
+ /* or, if current=<start_addr> & last=<end_addr>, swap */
+ if ((change_point[i]->addr < change_point[i-1]->addr) ||
+ ((change_point[i]->addr == change_point[i-1]->addr) &&
+ (change_point[i]->addr == change_point[i]->pentry->addr) &&
+ (change_point[i-1]->addr != change_point[i-1]->pentry->addr))
+ ) {
+ change_tmp = change_point[i];
+ change_point[i] = change_point[i-1];
+ change_point[i-1] = change_tmp;
+ still_changing = 1;
+ }
+ }
+ }
+
+ /* create a new memmap, removing overlaps */
+ overlap_entries = 0; /* number of entries in the overlap table */
+ new_entry = 0; /* index for creating new memmap entries */
+ last_type = 0; /* start with undefined memory type */
+ last_addr = 0; /* start with 0 as last starting address */
+ /* loop through change-points, determining affect on the new memmap */
+ for (chgidx = 0; chgidx < chg_nr; chgidx++) {
+ /* keep track of all overlapping memmap entries */
+ if (change_point[chgidx]->addr == change_point[chgidx]->pentry->addr) {
+ /* add map entry to overlap list (> 1 entry implies an overlap) */
+ overlap_list[overlap_entries++] = change_point[chgidx]->pentry;
+ } else {
+ /* remove entry from list (order independent, so swap with last) */
+ for (i = 0; i < overlap_entries; i++) {
+ if (overlap_list[i] == change_point[chgidx]->pentry)
+ overlap_list[i] = overlap_list[overlap_entries-1];
+ }
+ overlap_entries--;
+ }
+ /* if there are overlapping entries, decide which "type" to use */
+ /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
+ current_type = 0;
+ for (i = 0; i < overlap_entries; i++)
+ if (overlap_list[i]->type > current_type)
+ current_type = overlap_list[i]->type;
+ /* continue building up new memmap based on this information */
+ if (current_type != last_type) {
+ if (last_type != 0) {
+ new_map[new_entry].size =
+ change_point[chgidx]->addr - last_addr;
+ /* move forward only if the new size was non-zero */
+ if (new_map[new_entry].size != 0)
+ if (++new_entry >= BFIN_MEMMAP_MAX)
+ break; /* no more space left for new entries */
+ }
+ if (current_type != 0) {
+ new_map[new_entry].addr = change_point[chgidx]->addr;
+ new_map[new_entry].type = current_type;
+ last_addr = change_point[chgidx]->addr;
+ }
+ last_type = current_type;
+ }
+ }
+ new_nr = new_entry; /* retain count for new entries */
+
+ /* copy new mapping into original location */
+ memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry));
+ *pnr_map = new_nr;
+
+ return 0;
+}
+
+static void __init print_memory_map(char *who)
+{
+ int i;
+
+ for (i = 0; i < bfin_memmap.nr_map; i++) {
+ printk(KERN_DEBUG " %s: %016Lx - %016Lx ", who,
+ bfin_memmap.map[i].addr,
+ bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
+ switch (bfin_memmap.map[i].type) {
+ case BFIN_MEMMAP_RAM:
+ printk("(usable)\n");
+ break;
+ case BFIN_MEMMAP_RESERVED:
+ printk("(reserved)\n");
+ break;
+ default: printk("type %lu\n", bfin_memmap.map[i].type);
+ break;
+ }
+ }
+}
+
+static __init int parse_memmap(char *arg)
+{
+ unsigned long long start_at, mem_size;
+
+ if (!arg)
+ return -EINVAL;
+
+ mem_size = memparse(arg, &arg);
+ if (*arg == '@') {
+ start_at = memparse(arg+1, &arg);
+ add_memory_region(start_at, mem_size, BFIN_MEMMAP_RAM);
+ } else if (*arg == '$') {
+ start_at = memparse(arg+1, &arg);
+ add_memory_region(start_at, mem_size, BFIN_MEMMAP_RESERVED);
+ }
+
+ return 0;
+}
+
+/*
+ * Initial parsing of the command line. Currently, we support:
+ * - Controlling the linux memory size: mem=xxx[KMG]
+ * - Controlling the physical memory size: max_mem=xxx[KMG][$][#]
+ * $ -> reserved memory is dcacheable
+ * # -> reserved memory is icacheable
+ * - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region
+ * @ from <start> to <start>+<mem>, type RAM
+ * $ from <start> to <start>+<mem>, type RESERVED
+ *
+ */
+static __init void parse_cmdline_early(char *cmdline_p)
+{
+ char c = ' ', *to = cmdline_p;
+ unsigned int memsize;
+ for (;;) {
+ if (c == ' ') {
+ if (!memcmp(to, "mem=", 4)) {
+ to += 4;
+ memsize = memparse(to, &to);
+ if (memsize)
+ _ramend = memsize;
+
+ } else if (!memcmp(to, "max_mem=", 8)) {
+ to += 8;
+ memsize = memparse(to, &to);
+ if (memsize) {
+ physical_mem_end = memsize;
+ if (*to != ' ') {
+ if (*to == '$'
+ || *(to + 1) == '$')
+ reserved_mem_dcache_on =
+ 1;
+ if (*to == '#'
+ || *(to + 1) == '#')
+ reserved_mem_icache_on =
+ 1;
+ }
+ }
+ } else if (!memcmp(to, "earlyprintk=", 12)) {
+ to += 12;
+ setup_early_printk(to);
+ } else if (!memcmp(to, "memmap=", 7)) {
+ to += 7;
+ parse_memmap(to);
+ }
+ }
+ c = *(to++);
+ if (!c)
+ break;
+ }
+}
+
+/*
+ * Setup memory defaults from user config.
+ * The physical memory layout looks like:
+ *
+ * [_rambase, _ramstart]: kernel image
+ * [memory_start, memory_end]: dynamic memory managed by kernel
+ * [memory_end, _ramend]: reserved memory
+ * [memory_mtd_start(memory_end),
+ * memory_mtd_start + mtd_size]: rootfs (if any)
+ * [_ramend - DMA_UNCACHED_REGION,
+ * _ramend]: uncached DMA region
+ * [_ramend, physical_mem_end]: memory not managed by kernel
+ *
+ */
+static __init void memory_setup(void)
+{
+#ifdef CONFIG_MTD_UCLINUX
+ unsigned long mtd_phys = 0;
+#endif
+
+ _rambase = (unsigned long)_stext;
+ _ramstart = (unsigned long)_end;
+
+ if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) {
+ console_init();
+ panic("DMA region exceeds memory limit: %lu.\n",
+ _ramend - _ramstart);
+ }
+ memory_end = _ramend - DMA_UNCACHED_REGION;
+
+#ifdef CONFIG_MPU
+ /* Round up to multiple of 4MB. */
+ memory_start = (_ramstart + 0x3fffff) & ~0x3fffff;
+#else
+ memory_start = PAGE_ALIGN(_ramstart);
+#endif
+
+#if defined(CONFIG_MTD_UCLINUX)
+ /* generic memory mapped MTD driver */
+ memory_mtd_end = memory_end;
+
+ mtd_phys = _ramstart;
+ mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 8)));
+
+# if defined(CONFIG_EXT2_FS) || defined(CONFIG_EXT3_FS)
+ if (*((unsigned short *)(mtd_phys + 0x438)) == EXT2_SUPER_MAGIC)
+ mtd_size =
+ PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x404)) << 10);
+# endif
+
+# if defined(CONFIG_CRAMFS)
+ if (*((unsigned long *)(mtd_phys)) == CRAMFS_MAGIC)
+ mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x4)));
+# endif
+
+# if defined(CONFIG_ROMFS_FS)
+ if (((unsigned long *)mtd_phys)[0] == ROMSB_WORD0
+ && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
+ mtd_size =
+ PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
+# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+ /* Due to a Hardware Anomaly we need to limit the size of usable
+ * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
+ * 05000263 - Hardware loop corrupted when taking an ICPLB exception
+ */
+# if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
+ if (memory_end >= 56 * 1024 * 1024)
+ memory_end = 56 * 1024 * 1024;
+# else
+ if (memory_end >= 60 * 1024 * 1024)
+ memory_end = 60 * 1024 * 1024;
+# endif /* CONFIG_DEBUG_HUNT_FOR_ZERO */
+# endif /* ANOMALY_05000263 */
+# endif /* CONFIG_ROMFS_FS */
+
+ memory_end -= mtd_size;
+
+ if (mtd_size == 0) {
+ console_init();
+ panic("Don't boot kernel without rootfs attached.\n");
+ }
+
+ /* Relocate MTD image to the top of memory after the uncached memory area */
+ dma_memcpy((char *)memory_end, _end, mtd_size);
+
+ memory_mtd_start = memory_end;
+ _ebss = memory_mtd_start; /* define _ebss for compatible */
+#endif /* CONFIG_MTD_UCLINUX */
+
+#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+ /* Due to a Hardware Anomaly we need to limit the size of usable
+ * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
+ * 05000263 - Hardware loop corrupted when taking an ICPLB exception
+ */
+#if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
+ if (memory_end >= 56 * 1024 * 1024)
+ memory_end = 56 * 1024 * 1024;
+#else
+ if (memory_end >= 60 * 1024 * 1024)
+ memory_end = 60 * 1024 * 1024;
+#endif /* CONFIG_DEBUG_HUNT_FOR_ZERO */
+ printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20);
+#endif /* ANOMALY_05000263 */
+
+#ifdef CONFIG_MPU
+ page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32;
+ page_mask_order = get_order(3 * page_mask_nelts * sizeof(long));
+#endif
+
+#if !defined(CONFIG_MTD_UCLINUX)
+ /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
+ memory_end -= SIZE_4K;
+#endif
+
+ init_mm.start_code = (unsigned long)_stext;
+ init_mm.end_code = (unsigned long)_etext;
+ init_mm.end_data = (unsigned long)_edata;
+ init_mm.brk = (unsigned long)0;
+
+ printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
+ printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
+
+ printk(KERN_INFO "Memory map:\n"
+ KERN_INFO " fixedcode = 0x%p-0x%p\n"
+ KERN_INFO " text = 0x%p-0x%p\n"
+ KERN_INFO " rodata = 0x%p-0x%p\n"
+ KERN_INFO " bss = 0x%p-0x%p\n"
+ KERN_INFO " data = 0x%p-0x%p\n"
+ KERN_INFO " stack = 0x%p-0x%p\n"
+ KERN_INFO " init = 0x%p-0x%p\n"
+ KERN_INFO " available = 0x%p-0x%p\n"
+#ifdef CONFIG_MTD_UCLINUX
+ KERN_INFO " rootfs = 0x%p-0x%p\n"
+#endif
+#if DMA_UNCACHED_REGION > 0
+ KERN_INFO " DMA Zone = 0x%p-0x%p\n"
+#endif
+ , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
+ _stext, _etext,
+ __start_rodata, __end_rodata,
+ __bss_start, __bss_stop,
+ _sdata, _edata,
+ (void *)&init_thread_union,
+ (void *)((int)(&init_thread_union) + 0x2000),
+ __init_begin, __init_end,
+ (void *)_ramstart, (void *)memory_end
+#ifdef CONFIG_MTD_UCLINUX
+ , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
+#endif
+#if DMA_UNCACHED_REGION > 0
+ , (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend)
+#endif
+ );
+}
+
+/*
+ * Find the lowest, highest page frame number we have available
+ */
+void __init find_min_max_pfn(void)
+{
+ int i;
+
+ max_pfn = 0;
+ min_low_pfn = memory_end;
+
+ for (i = 0; i < bfin_memmap.nr_map; i++) {
+ unsigned long start, end;
+ /* RAM? */
+ if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM)
+ continue;
+ start = PFN_UP(bfin_memmap.map[i].addr);
+ end = PFN_DOWN(bfin_memmap.map[i].addr +
+ bfin_memmap.map[i].size);
+ if (start >= end)
+ continue;
+ if (end > max_pfn)
+ max_pfn = end;
+ if (start < min_low_pfn)
+ min_low_pfn = start;
+ }
+}
+
+static __init void setup_bootmem_allocator(void)
+{
+ int bootmap_size;
+ int i;
+ unsigned long start_pfn, end_pfn;
+ unsigned long curr_pfn, last_pfn, size;
+
+ /* mark memory between memory_start and memory_end usable */
+ add_memory_region(memory_start,
+ memory_end - memory_start, BFIN_MEMMAP_RAM);
+ /* sanity check for overlap */
+ sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map);
+ print_memory_map("boot memmap");
+
+ /* intialize globals in linux/bootmem.h */
+ find_min_max_pfn();
+ /* pfn of the last usable page frame */
+ if (max_pfn > memory_end >> PAGE_SHIFT)
+ max_pfn = memory_end >> PAGE_SHIFT;
+ /* pfn of last page frame directly mapped by kernel */
+ max_low_pfn = max_pfn;
+ /* pfn of the first usable page frame after kernel image*/
+ if (min_low_pfn < memory_start >> PAGE_SHIFT)
+ min_low_pfn = memory_start >> PAGE_SHIFT;
+
+ start_pfn = PAGE_OFFSET >> PAGE_SHIFT;
+ end_pfn = memory_end >> PAGE_SHIFT;
+
+ /*
+ * give all the memory to the bootmap allocator, tell it to put the
+ * boot mem_map at the start of memory.
+ */
+ bootmap_size = init_bootmem_node(NODE_DATA(0),
+ memory_start >> PAGE_SHIFT, /* map goes here */
+ start_pfn, end_pfn);
+
+ /* register the memmap regions with the bootmem allocator */
+ for (i = 0; i < bfin_memmap.nr_map; i++) {
+ /*
+ * Reserve usable memory
+ */
+ if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM)
+ continue;
+ /*
+ * We are rounding up the start address of usable memory:
+ */
+ curr_pfn = PFN_UP(bfin_memmap.map[i].addr);
+ if (curr_pfn >= end_pfn)
+ continue;
+ /*
+ * ... and at the end of the usable range downwards:
+ */
+ last_pfn = PFN_DOWN(bfin_memmap.map[i].addr +
+ bfin_memmap.map[i].size);
+
+ if (last_pfn > end_pfn)
+ last_pfn = end_pfn;
+
+ /*
+ * .. finally, did all the rounding and playing
+ * around just make the area go away?
+ */
+ if (last_pfn <= curr_pfn)
+ continue;
+
+ size = last_pfn - curr_pfn;
+ free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
+ }
+
+ /* reserve memory before memory_start, including bootmap */
+ reserve_bootmem(PAGE_OFFSET,
+ memory_start + bootmap_size + PAGE_SIZE - 1 - PAGE_OFFSET,
+ BOOTMEM_DEFAULT);
+}
+
+#define EBSZ_TO_MEG(ebsz) \
+({ \
+ int meg = 0; \
+ switch (ebsz & 0xf) { \
+ case 0x1: meg = 16; break; \
+ case 0x3: meg = 32; break; \
+ case 0x5: meg = 64; break; \
+ case 0x7: meg = 128; break; \
+ case 0x9: meg = 256; break; \
+ case 0xb: meg = 512; break; \
+ } \
+ meg; \
+})
+static inline int __init get_mem_size(void)
+{
+#if defined(EBIU_SDBCTL)
+# if defined(BF561_FAMILY)
+ int ret = 0;
+ u32 sdbctl = bfin_read_EBIU_SDBCTL();
+ ret += EBSZ_TO_MEG(sdbctl >> 0);
+ ret += EBSZ_TO_MEG(sdbctl >> 8);
+ ret += EBSZ_TO_MEG(sdbctl >> 16);
+ ret += EBSZ_TO_MEG(sdbctl >> 24);
+ return ret;
+# else
+ return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL());
+# endif
+#elif defined(EBIU_DDRCTL1)
+ u32 ddrctl = bfin_read_EBIU_DDRCTL1();
+ int ret = 0;
+ switch (ddrctl & 0xc0000) {
+ case DEVSZ_64: ret = 64 / 8;
+ case DEVSZ_128: ret = 128 / 8;
+ case DEVSZ_256: ret = 256 / 8;
+ case DEVSZ_512: ret = 512 / 8;
+ }
+ switch (ddrctl & 0x30000) {
+ case DEVWD_4: ret *= 2;
+ case DEVWD_8: ret *= 2;
+ case DEVWD_16: break;
+ }
+ if ((ddrctl & 0xc000) == 0x4000)
+ ret *= 2;
+ return ret;
+#endif
+ BUG();
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+ unsigned long sclk, cclk;
+
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#endif
+
+#if defined(CONFIG_CMDLINE_BOOL)
+ strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line));
+ command_line[sizeof(command_line) - 1] = 0;
+#endif
+
+ /* Keep a copy of command line */
+ *cmdline_p = &command_line[0];
+ memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
+ boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
+
+ /* setup memory defaults from the user config */
+ physical_mem_end = 0;
+ _ramend = get_mem_size() * 1024 * 1024;
+
+ memset(&bfin_memmap, 0, sizeof(bfin_memmap));
+
+ parse_cmdline_early(&command_line[0]);
+
+ if (physical_mem_end == 0)
+ physical_mem_end = _ramend;
+
+ memory_setup();
+
+ /* Initialize Async memory banks */
+ bfin_write_EBIU_AMBCTL0(AMBCTL0VAL);
+ bfin_write_EBIU_AMBCTL1(AMBCTL1VAL);
+ bfin_write_EBIU_AMGCTL(AMGCTLVAL);
+#ifdef CONFIG_EBIU_MBSCTLVAL
+ bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL);
+ bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
+ bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
+#endif
+
+ cclk = get_cclk();
+ sclk = get_sclk();
+
+#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
+ if (ANOMALY_05000273 && cclk == sclk)
+ panic("ANOMALY 05000273, SCLK can not be same as CCLK");
+#endif
+
+#ifdef BF561_FAMILY
+ if (ANOMALY_05000266) {
+ bfin_read_IMDMA_D0_IRQ_STATUS();
+ bfin_read_IMDMA_D1_IRQ_STATUS();
+ }
+#endif
+ printk(KERN_INFO "Hardware Trace ");
+ if (bfin_read_TBUFCTL() & 0x1)
+ printk("Active ");
+ else
+ printk("Off ");
+ if (bfin_read_TBUFCTL() & 0x2)
+ printk("and Enabled\n");
+ else
+ printk("and Disabled\n");
+
+#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
+ /* we need to initialize the Flashrom device here since we might
+ * do things with flash early on in the boot
+ */
+ flash_probe();
+#endif
+
+ _bfin_swrst = bfin_read_SWRST();
+
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+ bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
+#endif
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_RESET
+ bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT);
+#endif
+
+ if (_bfin_swrst & RESET_DOUBLE) {
+ printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /* We assume the crashing kernel, and the current symbol table match */
+ printk(KERN_EMERG " While handling exception (EXCAUSE = 0x%x) at %pF\n",
+ (int)init_saved_seqstat & SEQSTAT_EXCAUSE, init_saved_retx);
+ printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %pF\n", init_saved_dcplb_fault_addr);
+ printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %pF\n", init_saved_icplb_fault_addr);
+#endif
+ printk(KERN_NOTICE " The instruction at %pF caused a double exception\n",
+ init_retx);
+ } else if (_bfin_swrst & RESET_WDOG)
+ printk(KERN_INFO "Recovering from Watchdog event\n");
+ else if (_bfin_swrst & RESET_SOFTWARE)
+ printk(KERN_NOTICE "Reset caused by Software reset\n");
+
+ printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n");
+ if (bfin_compiled_revid() == 0xffff)
+ printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
+ else if (bfin_compiled_revid() == -1)
+ printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU);
+ else
+ printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
+
+ if (unlikely(CPUID != bfin_cpuid()))
+ printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
+ CPU, bfin_cpuid(), bfin_revid());
+ else {
+ if (bfin_revid() != bfin_compiled_revid()) {
+ if (bfin_compiled_revid() == -1)
+ printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
+ bfin_revid());
+ else if (bfin_compiled_revid() != 0xffff)
+ printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
+ bfin_compiled_revid(), bfin_revid());
+ }
+ if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
+ printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
+ CPU, bfin_revid());
+ }
+
+ printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
+
+ printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
+ cclk / 1000000, sclk / 1000000);
+
+ if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
+ printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
+
+ setup_bootmem_allocator();
+
+ paging_init();
+
+ /* Copy atomic sequences to their fixed location, and sanity check that
+ these locations are the ones that we advertise to userspace. */
+ memcpy((void *)FIXED_CODE_START, &fixed_code_start,
+ FIXED_CODE_END - FIXED_CODE_START);
+ BUG_ON((char *)&sigreturn_stub - (char *)&fixed_code_start
+ != SIGRETURN_STUB - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_xchg32 - (char *)&fixed_code_start
+ != ATOMIC_XCHG32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_cas32 - (char *)&fixed_code_start
+ != ATOMIC_CAS32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_add32 - (char *)&fixed_code_start
+ != ATOMIC_ADD32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_sub32 - (char *)&fixed_code_start
+ != ATOMIC_SUB32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_ior32 - (char *)&fixed_code_start
+ != ATOMIC_IOR32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_and32 - (char *)&fixed_code_start
+ != ATOMIC_AND32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
+ != ATOMIC_XOR32 - FIXED_CODE_START);
+ BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start
+ != SAFE_USER_INSTRUCTION - FIXED_CODE_START);
+
+ init_exception_vectors();
+ bfin_cache_init();
+}
+
+static int __init topology_init(void)
+{
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct cpu *c = &per_cpu(cpu_devices, cpu);
+
+ register_cpu(c, cpu);
+ }
+
+ return 0;
+}
+
+subsys_initcall(topology_init);
+
+/* Get the voltage input multiplier */
+static u_long cached_vco_pll_ctl, cached_vco;
+static u_long get_vco(void)
+{
+ u_long msel;
+
+ u_long pll_ctl = bfin_read_PLL_CTL();
+ if (pll_ctl == cached_vco_pll_ctl)
+ return cached_vco;
+ else
+ cached_vco_pll_ctl = pll_ctl;
+
+ msel = (pll_ctl >> 9) & 0x3F;
+ if (0 == msel)
+ msel = 64;
+
+ cached_vco = CONFIG_CLKIN_HZ;
+ cached_vco >>= (1 & pll_ctl); /* DF bit */
+ cached_vco *= msel;
+ return cached_vco;
+}
+
+/* Get the Core clock */
+static u_long cached_cclk_pll_div, cached_cclk;
+u_long get_cclk(void)
+{
+ u_long csel, ssel;
+
+ if (bfin_read_PLL_STAT() & 0x1)
+ return CONFIG_CLKIN_HZ;
+
+ ssel = bfin_read_PLL_DIV();
+ if (ssel == cached_cclk_pll_div)
+ return cached_cclk;
+ else
+ cached_cclk_pll_div = ssel;
+
+ csel = ((ssel >> 4) & 0x03);
+ ssel &= 0xf;
+ if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */
+ cached_cclk = get_vco() / ssel;
+ else
+ cached_cclk = get_vco() >> csel;
+ return cached_cclk;
+}
+EXPORT_SYMBOL(get_cclk);
+
+/* Get the System clock */
+static u_long cached_sclk_pll_div, cached_sclk;
+u_long get_sclk(void)
+{
+ u_long ssel;
+
+ if (bfin_read_PLL_STAT() & 0x1)
+ return CONFIG_CLKIN_HZ;
+
+ ssel = bfin_read_PLL_DIV();
+ if (ssel == cached_sclk_pll_div)
+ return cached_sclk;
+ else
+ cached_sclk_pll_div = ssel;
+
+ ssel &= 0xf;
+ if (0 == ssel) {
+ printk(KERN_WARNING "Invalid System Clock\n");
+ ssel = 1;
+ }
+
+ cached_sclk = get_vco() / ssel;
+ return cached_sclk;
+}
+EXPORT_SYMBOL(get_sclk);
+
+unsigned long sclk_to_usecs(unsigned long sclk)
+{
+ u64 tmp = USEC_PER_SEC * (u64)sclk;
+ do_div(tmp, get_sclk());
+ return tmp;
+}
+EXPORT_SYMBOL(sclk_to_usecs);
+
+unsigned long usecs_to_sclk(unsigned long usecs)
+{
+ u64 tmp = get_sclk() * (u64)usecs;
+ do_div(tmp, USEC_PER_SEC);
+ return tmp;
+}
+EXPORT_SYMBOL(usecs_to_sclk);
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ char *cpu, *mmu, *fpu, *vendor, *cache;
+ uint32_t revid;
+
+ u_long cclk = 0, sclk = 0;
+ u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
+
+ cpu = CPU;
+ mmu = "none";
+ fpu = "none";
+ revid = bfin_revid();
+
+ cclk = get_cclk();
+ sclk = get_sclk();
+
+ switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) {
+ case 0xca:
+ vendor = "Analog Devices";
+ break;
+ default:
+ vendor = "unknown";
+ break;
+ }
+
+ seq_printf(m, "processor\t: %d\n"
+ "vendor_id\t: %s\n",
+ *(unsigned int *)v,
+ vendor);
+
+ if (CPUID == bfin_cpuid())
+ seq_printf(m, "cpu family\t: 0x%04x\n", CPUID);
+ else
+ seq_printf(m, "cpu family\t: Compiled for:0x%04x, running on:0x%04x\n",
+ CPUID, bfin_cpuid());
+
+ seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
+ "stepping\t: %d\n",
+ cpu, cclk/1000000, sclk/1000000,
+#ifdef CONFIG_MPU
+ "mpu on",
+#else
+ "mpu off",
+#endif
+ revid);
+
+ seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
+ cclk/1000000, cclk%1000000,
+ sclk/1000000, sclk%1000000);
+ seq_printf(m, "bogomips\t: %lu.%02lu\n"
+ "Calibration\t: %lu loops\n",
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100,
+ (loops_per_jiffy * HZ));
+
+ /* Check Cache configutation */
+ switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
+ case ACACHE_BSRAM:
+ cache = "dbank-A/B\t: cache/sram";
+ dcache_size = 16;
+ dsup_banks = 1;
+ break;
+ case ACACHE_BCACHE:
+ cache = "dbank-A/B\t: cache/cache";
+ dcache_size = 32;
+ dsup_banks = 2;
+ break;
+ case ASRAM_BSRAM:
+ cache = "dbank-A/B\t: sram/sram";
+ dcache_size = 0;
+ dsup_banks = 0;
+ break;
+ default:
+ cache = "unknown";
+ dcache_size = 0;
+ dsup_banks = 0;
+ break;
+ }
+
+ /* Is it turned on? */
+ if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
+ dcache_size = 0;
+
+ if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) != (IMC | ENICPLB))
+ icache_size = 0;
+
+ seq_printf(m, "cache size\t: %d KB(L1 icache) "
+ "%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+ icache_size, dcache_size,
+#if defined CONFIG_BFIN_WB
+ "wb"
+#elif defined CONFIG_BFIN_WT
+ "wt"
+#endif
+ "", 0);
+
+ seq_printf(m, "%s\n", cache);
+
+ if (icache_size)
+ seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
+ BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+ else
+ seq_printf(m, "icache setup\t: off\n");
+
+ seq_printf(m,
+ "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
+ dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
+ BFIN_DLINES);
+#ifdef CONFIG_BFIN_ICACHE_LOCK
+ switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) {
+ case WAY0_L:
+ seq_printf(m, "Way0 Locked-Down\n");
+ break;
+ case WAY1_L:
+ seq_printf(m, "Way1 Locked-Down\n");
+ break;
+ case WAY01_L:
+ seq_printf(m, "Way0,Way1 Locked-Down\n");
+ break;
+ case WAY2_L:
+ seq_printf(m, "Way2 Locked-Down\n");
+ break;
+ case WAY02_L:
+ seq_printf(m, "Way0,Way2 Locked-Down\n");
+ break;
+ case WAY12_L:
+ seq_printf(m, "Way1,Way2 Locked-Down\n");
+ break;
+ case WAY012_L:
+ seq_printf(m, "Way0,Way1 & Way2 Locked-Down\n");
+ break;
+ case WAY3_L:
+ seq_printf(m, "Way3 Locked-Down\n");
+ break;
+ case WAY03_L:
+ seq_printf(m, "Way0,Way3 Locked-Down\n");
+ break;
+ case WAY13_L:
+ seq_printf(m, "Way1,Way3 Locked-Down\n");
+ break;
+ case WAY013_L:
+ seq_printf(m, "Way 0,Way1,Way3 Locked-Down\n");
+ break;
+ case WAY32_L:
+ seq_printf(m, "Way3,Way2 Locked-Down\n");
+ break;
+ case WAY320_L:
+ seq_printf(m, "Way3,Way2,Way0 Locked-Down\n");
+ break;
+ case WAY321_L:
+ seq_printf(m, "Way3,Way2,Way1 Locked-Down\n");
+ break;
+ case WAYALL_L:
+ seq_printf(m, "All Ways are locked\n");
+ break;
+ default:
+ seq_printf(m, "No Ways are locked\n");
+ }
+#endif
+ seq_printf(m, "board name\t: %s\n", bfin_board_name);
+ seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
+ physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
+ seq_printf(m, "kernel memory\t: %d kB (0x%p -> 0x%p)\n",
+ ((int)memory_end - (int)_stext) >> 10,
+ _stext,
+ (void *)memory_end);
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ if (*pos == 0)
+ *pos = first_cpu(cpu_online_map);
+ if (*pos >= num_online_cpus())
+ return NULL;
+
+ return pos;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ *pos = next_cpu(*pos, cpu_online_map);
+
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
+
+void __init cmdline_init(const char *r0)
+{
+ if (r0)
+ strncpy(command_line, r0, COMMAND_LINE_SIZE);
+}
OpenPOWER on IntegriCloud