1 files changed, 172 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
new file mode 100644
index 0000000..db1f954
--- /dev/null
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -0,0 +1,172 @@
+/*
+ * linux/arch/arm/mach-at91/board-carmeva.c
+ *
+ *  Copyright (c) 2005 Peer Georgi
+ *  		       Conitec Datasystems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+
+static void __init carmeva_map_io(void)
+{
+	/* Initialize processor: 20.000 MHz crystal */
+	at91rm9200_initialize(20000000, AT91RM9200_BGA);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init carmeva_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata carmeva_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata carmeva_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata carmeva_udc_data = {
+	.vbus_pin	= AT91_PIN_PD12,
+	.pullup_pin	= AT91_PIN_PD9,
+};
+
+/* FIXME: user dependant */
+// static struct at91_cf_data __initdata carmeva_cf_data = {
+//	.det_pin	= AT91_PIN_PB0,
+//	.rst_pin	= AT91_PIN_PC5,
+	// .irq_pin	= ... not connected
+	// .vcc_pin	= ... always powered
+// };
+
+static struct at91_mmc_data __initdata carmeva_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PB10,
+	.wp_pin		= AT91_PIN_PC14,
+};
+
+static struct spi_board_info carmeva_spi_devices[] = {
+	{ /* DataFlash chip */
+		.modalias = "mtd_dataflash",
+		.chip_select  = 0,
+		.max_speed_hz = 10 * 1000 * 1000,
+	},
+	{ /* User accessible spi - cs1 (250KHz) */
+		.modalias = "spi-cs1",
+		.chip_select  = 1,
+		.max_speed_hz = 250 *  1000,
+	},
+	{ /* User accessible spi - cs2 (1MHz) */
+		.modalias = "spi-cs2",
+		.chip_select  = 2,
+		.max_speed_hz = 1 * 1000 *  1000,
+	},
+	{ /* User accessible spi - cs3 (10MHz) */
+		.modalias = "spi-cs3",
+		.chip_select  = 3,
+		.max_speed_hz = 10 * 1000 *  1000,
+	},
+};
+
+static struct gpio_led carmeva_leds[] = {
+	{ /* "user led 1", LED9 */
+		.name			= "led9",
+		.gpio			= AT91_PIN_PA21,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{ /* "user led 2", LED10 */
+		.name			= "led10",
+		.gpio			= AT91_PIN_PA25,
+		.active_low		= 1,
+	},
+	{ /* "user led 3", LED11 */
+		.name			= "led11",
+		.gpio			= AT91_PIN_PA26,
+		.active_low		= 1,
+	},
+	{ /* "user led 4", LED12 */
+		.name			= "led12",
+		.gpio			= AT91_PIN_PA18,
+		.active_low		= 1,
+	}
+};
+
+static void __init carmeva_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&carmeva_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&carmeva_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&carmeva_udc_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* SPI */
+	at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
+	/* Compact Flash */
+//	at91_add_device_cf(&carmeva_cf_data);
+	/* MMC */
+	at91_add_device_mmc(0, &carmeva_mmc_data);
+	/* LEDs */
+	at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
+}
+
+MACHINE_START(CARMEVA, "Carmeva")
+	/* Maintainer: Conitec Datasystems */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= carmeva_map_io,
+	.init_irq	= carmeva_init_irq,
+	.init_machine	= carmeva_board_init,
+MACHINE_END