Initial import of modified Linux 2.6.28 tree

Original upstream URL:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git | branch linux-2.6.28.y

1 files changed, 1743 insertions, 0 deletions

diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
new file mode 100644
index 0000000..1266924
--- /dev/null
+++ b/drivers/ata/pata_bf54x.c
@@ -0,0 +1,1743 @@
+/*
+ * File:         drivers/ata/pata_bf54x.c
+ * Author:       Sonic Zhang <sonic.zhang@analog.com>
+ *
+ * Created:
+ * Description:  PATA Driver for blackfin 54x
+ *
+ * Modified:
+ *               Copyright 2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <asm/dma.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
+
+#define DRV_NAME		"pata-bf54x"
+#define DRV_VERSION		"0.9"
+
+#define ATA_REG_CTRL		0x0E
+#define ATA_REG_ALTSTATUS	ATA_REG_CTRL
+
+/* These are the offset of the controller's registers */
+#define ATAPI_OFFSET_CONTROL		0x00
+#define ATAPI_OFFSET_STATUS		0x04
+#define ATAPI_OFFSET_DEV_ADDR		0x08
+#define ATAPI_OFFSET_DEV_TXBUF		0x0c
+#define ATAPI_OFFSET_DEV_RXBUF		0x10
+#define ATAPI_OFFSET_INT_MASK		0x14
+#define ATAPI_OFFSET_INT_STATUS		0x18
+#define ATAPI_OFFSET_XFER_LEN		0x1c
+#define ATAPI_OFFSET_LINE_STATUS	0x20
+#define ATAPI_OFFSET_SM_STATE		0x24
+#define ATAPI_OFFSET_TERMINATE		0x28
+#define ATAPI_OFFSET_PIO_TFRCNT		0x2c
+#define ATAPI_OFFSET_DMA_TFRCNT		0x30
+#define ATAPI_OFFSET_UMAIN_TFRCNT	0x34
+#define ATAPI_OFFSET_UDMAOUT_TFRCNT	0x38
+#define ATAPI_OFFSET_REG_TIM_0		0x40
+#define ATAPI_OFFSET_PIO_TIM_0		0x44
+#define ATAPI_OFFSET_PIO_TIM_1		0x48
+#define ATAPI_OFFSET_MULTI_TIM_0	0x50
+#define ATAPI_OFFSET_MULTI_TIM_1	0x54
+#define ATAPI_OFFSET_MULTI_TIM_2	0x58
+#define ATAPI_OFFSET_ULTRA_TIM_0	0x60
+#define ATAPI_OFFSET_ULTRA_TIM_1	0x64
+#define ATAPI_OFFSET_ULTRA_TIM_2	0x68
+#define ATAPI_OFFSET_ULTRA_TIM_3	0x6c
+
+
+#define ATAPI_GET_CONTROL(base)\
+	bfin_read16(base + ATAPI_OFFSET_CONTROL)
+#define ATAPI_SET_CONTROL(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_CONTROL, val)
+#define ATAPI_GET_STATUS(base)\
+	bfin_read16(base + ATAPI_OFFSET_STATUS)
+#define ATAPI_GET_DEV_ADDR(base)\
+	bfin_read16(base + ATAPI_OFFSET_DEV_ADDR)
+#define ATAPI_SET_DEV_ADDR(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_DEV_ADDR, val)
+#define ATAPI_GET_DEV_TXBUF(base)\
+	bfin_read16(base + ATAPI_OFFSET_DEV_TXBUF)
+#define ATAPI_SET_DEV_TXBUF(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_DEV_TXBUF, val)
+#define ATAPI_GET_DEV_RXBUF(base)\
+	bfin_read16(base + ATAPI_OFFSET_DEV_RXBUF)
+#define ATAPI_SET_DEV_RXBUF(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_DEV_RXBUF, val)
+#define ATAPI_GET_INT_MASK(base)\
+	bfin_read16(base + ATAPI_OFFSET_INT_MASK)
+#define ATAPI_SET_INT_MASK(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_INT_MASK, val)
+#define ATAPI_GET_INT_STATUS(base)\
+	bfin_read16(base + ATAPI_OFFSET_INT_STATUS)
+#define ATAPI_SET_INT_STATUS(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_INT_STATUS, val)
+#define ATAPI_GET_XFER_LEN(base)\
+	bfin_read16(base + ATAPI_OFFSET_XFER_LEN)
+#define ATAPI_SET_XFER_LEN(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_XFER_LEN, val)
+#define ATAPI_GET_LINE_STATUS(base)\
+	bfin_read16(base + ATAPI_OFFSET_LINE_STATUS)
+#define ATAPI_GET_SM_STATE(base)\
+	bfin_read16(base + ATAPI_OFFSET_SM_STATE)
+#define ATAPI_GET_TERMINATE(base)\
+	bfin_read16(base + ATAPI_OFFSET_TERMINATE)
+#define ATAPI_SET_TERMINATE(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_TERMINATE, val)
+#define ATAPI_GET_PIO_TFRCNT(base)\
+	bfin_read16(base + ATAPI_OFFSET_PIO_TFRCNT)
+#define ATAPI_GET_DMA_TFRCNT(base)\
+	bfin_read16(base + ATAPI_OFFSET_DMA_TFRCNT)
+#define ATAPI_GET_UMAIN_TFRCNT(base)\
+	bfin_read16(base + ATAPI_OFFSET_UMAIN_TFRCNT)
+#define ATAPI_GET_UDMAOUT_TFRCNT(base)\
+	bfin_read16(base + ATAPI_OFFSET_UDMAOUT_TFRCNT)
+#define ATAPI_GET_REG_TIM_0(base)\
+	bfin_read16(base + ATAPI_OFFSET_REG_TIM_0)
+#define ATAPI_SET_REG_TIM_0(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_REG_TIM_0, val)
+#define ATAPI_GET_PIO_TIM_0(base)\
+	bfin_read16(base + ATAPI_OFFSET_PIO_TIM_0)
+#define ATAPI_SET_PIO_TIM_0(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_PIO_TIM_0, val)
+#define ATAPI_GET_PIO_TIM_1(base)\
+	bfin_read16(base + ATAPI_OFFSET_PIO_TIM_1)
+#define ATAPI_SET_PIO_TIM_1(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_PIO_TIM_1, val)
+#define ATAPI_GET_MULTI_TIM_0(base)\
+	bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_0)
+#define ATAPI_SET_MULTI_TIM_0(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_0, val)
+#define ATAPI_GET_MULTI_TIM_1(base)\
+	bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_1)
+#define ATAPI_SET_MULTI_TIM_1(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_1, val)
+#define ATAPI_GET_MULTI_TIM_2(base)\
+	bfin_read16(base + ATAPI_OFFSET_MULTI_TIM_2)
+#define ATAPI_SET_MULTI_TIM_2(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_MULTI_TIM_2, val)
+#define ATAPI_GET_ULTRA_TIM_0(base)\
+	bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_0)
+#define ATAPI_SET_ULTRA_TIM_0(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_0, val)
+#define ATAPI_GET_ULTRA_TIM_1(base)\
+	bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_1)
+#define ATAPI_SET_ULTRA_TIM_1(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_1, val)
+#define ATAPI_GET_ULTRA_TIM_2(base)\
+	bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_2)
+#define ATAPI_SET_ULTRA_TIM_2(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_2, val)
+#define ATAPI_GET_ULTRA_TIM_3(base)\
+	bfin_read16(base + ATAPI_OFFSET_ULTRA_TIM_3)
+#define ATAPI_SET_ULTRA_TIM_3(base, val)\
+	bfin_write16(base + ATAPI_OFFSET_ULTRA_TIM_3, val)
+
+/**
+ * PIO Mode - Frequency compatibility
+ */
+/* mode: 0         1         2         3         4 */
+static const u32 pio_fsclk[] =
+{ 33333333, 33333333, 33333333, 33333333, 33333333 };
+
+/**
+ * MDMA Mode - Frequency compatibility
+ */
+/*               mode:      0         1         2        */
+static const u32 mdma_fsclk[] = { 33333333, 33333333, 33333333 };
+
+/**
+ * UDMA Mode - Frequency compatibility
+ *
+ * UDMA5 - 100 MB/s   - SCLK  = 133 MHz
+ * UDMA4 - 66 MB/s    - SCLK >=  80 MHz
+ * UDMA3 - 44.4 MB/s  - SCLK >=  50 MHz
+ * UDMA2 - 33 MB/s    - SCLK >=  40 MHz
+ */
+/* mode: 0         1         2         3         4          5 */
+static const u32 udma_fsclk[] =
+{ 33333333, 33333333, 40000000, 50000000, 80000000, 133333333 };
+
+/**
+ * Register transfer timing table
+ */
+/*               mode:       0    1    2    3    4    */
+/* Cycle Time                     */
+static const u32 reg_t0min[]   = { 600, 383, 330, 180, 120 };
+/* DIOR/DIOW to end cycle         */
+static const u32 reg_t2min[]   = { 290, 290, 290, 70,  25  };
+/* DIOR/DIOW asserted pulse width */
+static const u32 reg_teocmin[] = { 290, 290, 290, 80,  70  };
+
+/**
+ * PIO timing table
+ */
+/*               mode:       0    1    2    3    4    */
+/* Cycle Time                     */
+static const u32 pio_t0min[]   = { 600, 383, 240, 180, 120 };
+/* Address valid to DIOR/DIORW    */
+static const u32 pio_t1min[]   = { 70,  50,  30,  30,  25  };
+/* DIOR/DIOW to end cycle         */
+static const u32 pio_t2min[]   = { 165, 125, 100, 80,  70  };
+/* DIOR/DIOW asserted pulse width */
+static const u32 pio_teocmin[] = { 165, 125, 100, 70,  25  };
+/* DIOW data hold                 */
+static const u32 pio_t4min[]   = { 30,  20,  15,  10,  10  };
+
+/* ******************************************************************
+ * Multiword DMA timing table
+ * ******************************************************************
+ */
+/*               mode:       0   1    2        */
+/* Cycle Time                     */
+static const u32 mdma_t0min[]  = { 480, 150, 120 };
+/* DIOR/DIOW asserted pulse width */
+static const u32 mdma_tdmin[]  = { 215, 80,  70  };
+/* DMACK to read data released    */
+static const u32 mdma_thmin[]  = { 20,  15,  10  };
+/* DIOR/DIOW to DMACK hold        */
+static const u32 mdma_tjmin[]  = { 20,  5,   5   };
+/* DIOR negated pulse width       */
+static const u32 mdma_tkrmin[] = { 50,  50,  25  };
+/* DIOR negated pulse width       */
+static const u32 mdma_tkwmin[] = { 215, 50,  25  };
+/* CS[1:0] valid to DIOR/DIOW     */
+static const u32 mdma_tmmin[]  = { 50,  30,  25  };
+/* DMACK to read data released    */
+static const u32 mdma_tzmax[]  = { 20,  25,  25  };
+
+/**
+ * Ultra DMA timing table
+ */
+/*               mode:         0    1    2    3    4    5       */
+static const u32 udma_tcycmin[]  = { 112, 73,  54,  39,  25,  17 };
+static const u32 udma_tdvsmin[]  = { 70,  48,  31,  20,  7,   5  };
+static const u32 udma_tenvmax[]  = { 70,  70,  70,  55,  55,  50 };
+static const u32 udma_trpmin[]   = { 160, 125, 100, 100, 100, 85 };
+static const u32 udma_tmin[]     = { 5,   5,   5,   5,   3,   3  };
+
+
+static const u32 udma_tmlimin = 20;
+static const u32 udma_tzahmin = 20;
+static const u32 udma_tenvmin = 20;
+static const u32 udma_tackmin = 20;
+static const u32 udma_tssmin = 50;
+
+/**
+ *
+ *	Function:       num_clocks_min
+ *
+ *	Description:
+ *	calculate number of SCLK cycles to meet minimum timing
+ */
+static unsigned short num_clocks_min(unsigned long tmin,
+				unsigned long fsclk)
+{
+	unsigned long tmp ;
+	unsigned short result;
+
+	tmp = tmin * (fsclk/1000/1000) / 1000;
+	result = (unsigned short)tmp;
+	if ((tmp*1000*1000) < (tmin*(fsclk/1000))) {
+		result++;
+	}
+
+	return result;
+}
+
+/**
+ *	bfin_set_piomode - Initialize host controller PATA PIO timings
+ *	@ap: Port whose timings we are configuring
+ *	@adev: um
+ *
+ *	Set PIO mode for device.
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+
+static void bfin_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	int mode = adev->pio_mode - XFER_PIO_0;
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	unsigned int fsclk = get_sclk();
+	unsigned short teoc_reg, t2_reg, teoc_pio;
+	unsigned short t4_reg, t2_pio, t1_reg;
+	unsigned short n0, n6, t6min = 5;
+
+	/* the most restrictive timing value is t6 and tc, the DIOW - data hold
+	* If one SCLK pulse is longer than this minimum value then register
+	* transfers cannot be supported at this frequency.
+	*/
+	n6 = num_clocks_min(t6min, fsclk);
+	if (mode >= 0 && mode <= 4 && n6 >= 1) {
+		dev_dbg(adev->link->ap->dev, "set piomode: mode=%d, fsclk=%ud\n", mode, fsclk);
+		/* calculate the timing values for register transfers. */
+		while (mode > 0 && pio_fsclk[mode] > fsclk)
+			mode--;
+
+		/* DIOR/DIOW to end cycle time */
+		t2_reg = num_clocks_min(reg_t2min[mode], fsclk);
+		/* DIOR/DIOW asserted pulse width */
+		teoc_reg = num_clocks_min(reg_teocmin[mode], fsclk);
+		/* Cycle Time */
+		n0  = num_clocks_min(reg_t0min[mode], fsclk);
+
+		/* increase t2 until we meed the minimum cycle length */
+		if (t2_reg + teoc_reg < n0)
+			t2_reg = n0 - teoc_reg;
+
+		/* calculate the timing values for pio transfers. */
+
+		/* DIOR/DIOW to end cycle time */
+		t2_pio = num_clocks_min(pio_t2min[mode], fsclk);
+		/* DIOR/DIOW asserted pulse width */
+		teoc_pio = num_clocks_min(pio_teocmin[mode], fsclk);
+		/* Cycle Time */
+		n0  = num_clocks_min(pio_t0min[mode], fsclk);
+
+		/* increase t2 until we meed the minimum cycle length */
+		if (t2_pio + teoc_pio < n0)
+			t2_pio = n0 - teoc_pio;
+
+		/* Address valid to DIOR/DIORW */
+		t1_reg = num_clocks_min(pio_t1min[mode], fsclk);
+
+		/* DIOW data hold */
+		t4_reg = num_clocks_min(pio_t4min[mode], fsclk);
+
+		ATAPI_SET_REG_TIM_0(base, (teoc_reg<<8 | t2_reg));
+		ATAPI_SET_PIO_TIM_0(base, (t4_reg<<12 | t2_pio<<4 | t1_reg));
+		ATAPI_SET_PIO_TIM_1(base, teoc_pio);
+		if (mode > 2) {
+			ATAPI_SET_CONTROL(base,
+				ATAPI_GET_CONTROL(base) | IORDY_EN);
+		} else {
+			ATAPI_SET_CONTROL(base,
+				ATAPI_GET_CONTROL(base) & ~IORDY_EN);
+		}
+
+		/* Disable host ATAPI PIO interrupts */
+		ATAPI_SET_INT_MASK(base, ATAPI_GET_INT_MASK(base)
+			& ~(PIO_DONE_MASK | HOST_TERM_XFER_MASK));
+		SSYNC();
+	}
+}
+
+/**
+ *	bfin_set_dmamode - Initialize host controller PATA DMA timings
+ *	@ap: Port whose timings we are configuring
+ *	@adev: um
+ *	@udma: udma mode, 0 - 6
+ *
+ *	Set UDMA mode for device.
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+
+static void bfin_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	int mode;
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	unsigned long fsclk = get_sclk();
+	unsigned short tenv, tack, tcyc_tdvs, tdvs, tmli, tss, trp, tzah;
+	unsigned short tm, td, tkr, tkw, teoc, th;
+	unsigned short n0, nf, tfmin = 5;
+	unsigned short nmin, tcyc;
+
+	mode = adev->dma_mode - XFER_UDMA_0;
+	if (mode >= 0 && mode <= 5) {
+		dev_dbg(adev->link->ap->dev, "set udmamode: mode=%d\n", mode);
+		/* the most restrictive timing value is t6 and tc,
+		 * the DIOW - data hold. If one SCLK pulse is longer
+		 * than this minimum value then register
+		 * transfers cannot be supported at this frequency.
+		 */
+		while (mode > 0 && udma_fsclk[mode] > fsclk)
+			mode--;
+
+		nmin = num_clocks_min(udma_tmin[mode], fsclk);
+		if (nmin >= 1) {
+			/* calculate the timing values for Ultra DMA. */
+			tdvs = num_clocks_min(udma_tdvsmin[mode], fsclk);
+			tcyc = num_clocks_min(udma_tcycmin[mode], fsclk);
+			tcyc_tdvs = 2;
+
+			/* increase tcyc - tdvs (tcyc_tdvs) until we meed
+			 * the minimum cycle length
+			 */
+			if (tdvs + tcyc_tdvs < tcyc)
+				tcyc_tdvs = tcyc - tdvs;
+
+			/* Mow assign the values required for the timing
+			 * registers
+			 */
+			if (tcyc_tdvs < 2)
+				tcyc_tdvs = 2;
+
+			if (tdvs < 2)
+				tdvs = 2;
+
+			tack = num_clocks_min(udma_tackmin, fsclk);
+			tss = num_clocks_min(udma_tssmin, fsclk);
+			tmli = num_clocks_min(udma_tmlimin, fsclk);
+			tzah = num_clocks_min(udma_tzahmin, fsclk);
+			trp = num_clocks_min(udma_trpmin[mode], fsclk);
+			tenv = num_clocks_min(udma_tenvmin, fsclk);
+			if (tenv <= udma_tenvmax[mode]) {
+				ATAPI_SET_ULTRA_TIM_0(base, (tenv<<8 | tack));
+				ATAPI_SET_ULTRA_TIM_1(base,
+					(tcyc_tdvs<<8 | tdvs));
+				ATAPI_SET_ULTRA_TIM_2(base, (tmli<<8 | tss));
+				ATAPI_SET_ULTRA_TIM_3(base, (trp<<8 | tzah));
+
+				/* Enable host ATAPI Untra DMA interrupts */
+				ATAPI_SET_INT_MASK(base,
+					ATAPI_GET_INT_MASK(base)
+					| UDMAIN_DONE_MASK
+					| UDMAOUT_DONE_MASK
+					| UDMAIN_TERM_MASK
+					| UDMAOUT_TERM_MASK);
+			}
+		}
+	}
+
+	mode = adev->dma_mode - XFER_MW_DMA_0;
+	if (mode >= 0 && mode <= 2) {
+		dev_dbg(adev->link->ap->dev, "set mdmamode: mode=%d\n", mode);
+		/* the most restrictive timing value is tf, the DMACK to
+		 * read data released. If one SCLK pulse is longer than
+		 * this maximum value then the MDMA mode
+		 * cannot be supported at this frequency.
+		 */
+		while (mode > 0 && mdma_fsclk[mode] > fsclk)
+			mode--;
+
+		nf = num_clocks_min(tfmin, fsclk);
+		if (nf >= 1) {
+			/* calculate the timing values for Multi-word DMA. */
+
+			/* DIOR/DIOW asserted pulse width */
+			td = num_clocks_min(mdma_tdmin[mode], fsclk);
+
+			/* DIOR negated pulse width */
+			tkw = num_clocks_min(mdma_tkwmin[mode], fsclk);
+
+			/* Cycle Time */
+			n0  = num_clocks_min(mdma_t0min[mode], fsclk);
+
+			/* increase tk until we meed the minimum cycle length */
+			if (tkw + td < n0)
+				tkw = n0 - td;
+
+			/* DIOR negated pulse width - read */
+			tkr = num_clocks_min(mdma_tkrmin[mode], fsclk);
+			/* CS{1:0] valid to DIOR/DIOW */
+			tm = num_clocks_min(mdma_tmmin[mode], fsclk);
+			/* DIOR/DIOW to DMACK hold */
+			teoc = num_clocks_min(mdma_tjmin[mode], fsclk);
+			/* DIOW Data hold */
+			th = num_clocks_min(mdma_thmin[mode], fsclk);
+
+			ATAPI_SET_MULTI_TIM_0(base, (tm<<8 | td));
+			ATAPI_SET_MULTI_TIM_1(base, (tkr<<8 | tkw));
+			ATAPI_SET_MULTI_TIM_2(base, (teoc<<8 | th));
+
+			/* Enable host ATAPI Multi DMA interrupts */
+			ATAPI_SET_INT_MASK(base, ATAPI_GET_INT_MASK(base)
+				| MULTI_DONE_MASK | MULTI_TERM_MASK);
+			SSYNC();
+		}
+	}
+	return;
+}
+
+/**
+ *
+ *    Function:       wait_complete
+ *
+ *    Description:    Waits the interrupt from device
+ *
+ */
+static inline void wait_complete(void __iomem *base, unsigned short mask)
+{
+	unsigned short status;
+	unsigned int i = 0;
+
+#define PATA_BF54X_WAIT_TIMEOUT		10000
+
+	for (i = 0; i < PATA_BF54X_WAIT_TIMEOUT; i++) {
+		status = ATAPI_GET_INT_STATUS(base) & mask;
+		if (status)
+			break;
+	}
+
+	ATAPI_SET_INT_STATUS(base, mask);
+}
+
+/**
+ *
+ *    Function:       write_atapi_register
+ *
+ *    Description:    Writes to ATA Device Resgister
+ *
+ */
+
+static void write_atapi_register(void __iomem *base,
+		unsigned long ata_reg, unsigned short value)
+{
+	/* Program the ATA_DEV_TXBUF register with write data (to be
+	 * written into the device).
+	 */
+	ATAPI_SET_DEV_TXBUF(base, value);
+
+	/* Program the ATA_DEV_ADDR register with address of the
+	 * device register (0x01 to 0x0F).
+	 */
+	ATAPI_SET_DEV_ADDR(base, ata_reg);
+
+	/* Program the ATA_CTRL register with dir set to write (1)
+	 */
+	ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR));
+
+	/* ensure PIO DMA is not set */
+	ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
+
+	/* and start the transfer */
+	ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
+
+	/* Wait for the interrupt to indicate the end of the transfer.
+	 * (We need to wait on and clear rhe ATA_DEV_INT interrupt status)
+	 */
+	wait_complete(base, PIO_DONE_INT);
+}
+
+/**
+ *
+ *	Function:       read_atapi_register
+ *
+ *Description:    Reads from ATA Device Resgister
+ *
+ */
+
+static unsigned short read_atapi_register(void __iomem *base,
+		unsigned long ata_reg)
+{
+	/* Program the ATA_DEV_ADDR register with address of the
+	 * device register (0x01 to 0x0F).
+	 */
+	ATAPI_SET_DEV_ADDR(base, ata_reg);
+
+	/* Program the ATA_CTRL register with dir set to read (0) and
+	 */
+	ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR));
+
+	/* ensure PIO DMA is not set */
+	ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
+
+	/* and start the transfer */
+	ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
+
+	/* Wait for the interrupt to indicate the end of the transfer.
+	 * (PIO_DONE interrupt is set and it doesn't seem to matter
+	 * that we don't clear it)
+	 */
+	wait_complete(base, PIO_DONE_INT);
+
+	/* Read the ATA_DEV_RXBUF register with write data (to be
+	 * written into the device).
+	 */
+	return ATAPI_GET_DEV_RXBUF(base);
+}
+
+/**
+ *
+ *    Function:       write_atapi_register_data
+ *
+ *    Description:    Writes to ATA Device Resgister
+ *
+ */
+
+static void write_atapi_data(void __iomem *base,
+		int len, unsigned short *buf)
+{
+	int i;
+
+	/* Set transfer length to 1 */
+	ATAPI_SET_XFER_LEN(base, 1);
+
+	/* Program the ATA_DEV_ADDR register with address of the
+	 * ATA_REG_DATA
+	 */
+	ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA);
+
+	/* Program the ATA_CTRL register with dir set to write (1)
+	 */
+	ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | XFER_DIR));
+
+	/* ensure PIO DMA is not set */
+	ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
+
+	for (i = 0; i < len; i++) {
+		/* Program the ATA_DEV_TXBUF register with write data (to be
+		 * written into the device).
+		 */
+		ATAPI_SET_DEV_TXBUF(base, buf[i]);
+
+		/* and start the transfer */
+		ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
+
+		/* Wait for the interrupt to indicate the end of the transfer.
+		 * (We need to wait on and clear rhe ATA_DEV_INT
+		 * interrupt status)
+		 */
+		wait_complete(base, PIO_DONE_INT);
+	}
+}
+
+/**
+ *
+ *	Function:       read_atapi_register_data
+ *
+ *	Description:    Reads from ATA Device Resgister
+ *
+ */
+
+static void read_atapi_data(void __iomem *base,
+		int len, unsigned short *buf)
+{
+	int i;
+
+	/* Set transfer length to 1 */
+	ATAPI_SET_XFER_LEN(base, 1);
+
+	/* Program the ATA_DEV_ADDR register with address of the
+	 * ATA_REG_DATA
+	 */
+	ATAPI_SET_DEV_ADDR(base, ATA_REG_DATA);
+
+	/* Program the ATA_CTRL register with dir set to read (0) and
+	 */
+	ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~XFER_DIR));
+
+	/* ensure PIO DMA is not set */
+	ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) & ~PIO_USE_DMA));
+
+	for (i = 0; i < len; i++) {
+		/* and start the transfer */
+		ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base) | PIO_START));
+
+		/* Wait for the interrupt to indicate the end of the transfer.
+		 * (PIO_DONE interrupt is set and it doesn't seem to matter
+		 * that we don't clear it)
+		 */
+		wait_complete(base, PIO_DONE_INT);
+
+		/* Read the ATA_DEV_RXBUF register with write data (to be
+		 * written into the device).
+		 */
+		buf[i] = ATAPI_GET_DEV_RXBUF(base);
+	}
+}
+
+/**
+ *	bfin_tf_load - send taskfile registers to host controller
+ *	@ap: Port to which output is sent
+ *	@tf: ATA taskfile register set
+ *
+ *	Note: Original code is ata_sff_tf_load().
+ */
+
+static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+	if (tf->ctl != ap->last_ctl) {
+		write_atapi_register(base, ATA_REG_CTRL, tf->ctl);
+		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
+	}
+
+	if (is_addr) {
+		if (tf->flags & ATA_TFLAG_LBA48) {
+			write_atapi_register(base, ATA_REG_FEATURE,
+						tf->hob_feature);
+			write_atapi_register(base, ATA_REG_NSECT,
+						tf->hob_nsect);
+			write_atapi_register(base, ATA_REG_LBAL, tf->hob_lbal);
+			write_atapi_register(base, ATA_REG_LBAM, tf->hob_lbam);
+			write_atapi_register(base, ATA_REG_LBAH, tf->hob_lbah);
+			dev_dbg(ap->dev, "hob: feat 0x%X nsect 0x%X, lba 0x%X "
+				 "0x%X 0x%X\n",
+				tf->hob_feature,
+				tf->hob_nsect,
+				tf->hob_lbal,
+				tf->hob_lbam,
+				tf->hob_lbah);
+		}
+
+		write_atapi_register(base, ATA_REG_FEATURE, tf->feature);
+		write_atapi_register(base, ATA_REG_NSECT, tf->nsect);
+		write_atapi_register(base, ATA_REG_LBAL, tf->lbal);
+		write_atapi_register(base, ATA_REG_LBAM, tf->lbam);
+		write_atapi_register(base, ATA_REG_LBAH, tf->lbah);
+		dev_dbg(ap->dev, "feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+			tf->feature,
+			tf->nsect,
+			tf->lbal,
+			tf->lbam,
+			tf->lbah);
+	}
+
+	if (tf->flags & ATA_TFLAG_DEVICE) {
+		write_atapi_register(base, ATA_REG_DEVICE, tf->device);
+		dev_dbg(ap->dev, "device 0x%X\n", tf->device);
+	}
+
+	ata_wait_idle(ap);
+}
+
+/**
+ *	bfin_check_status - Read device status reg & clear interrupt
+ *	@ap: port where the device is
+ *
+ *	Note: Original code is ata_check_status().
+ */
+
+static u8 bfin_check_status(struct ata_port *ap)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	return read_atapi_register(base, ATA_REG_STATUS);
+}
+
+/**
+ *	bfin_tf_read - input device's ATA taskfile shadow registers
+ *	@ap: Port from which input is read
+ *	@tf: ATA taskfile register set for storing input
+ *
+ *	Note: Original code is ata_sff_tf_read().
+ */
+
+static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+
+	tf->command = bfin_check_status(ap);
+	tf->feature = read_atapi_register(base, ATA_REG_ERR);
+	tf->nsect = read_atapi_register(base, ATA_REG_NSECT);
+	tf->lbal = read_atapi_register(base, ATA_REG_LBAL);
+	tf->lbam = read_atapi_register(base, ATA_REG_LBAM);
+	tf->lbah = read_atapi_register(base, ATA_REG_LBAH);
+	tf->device = read_atapi_register(base, ATA_REG_DEVICE);
+
+	if (tf->flags & ATA_TFLAG_LBA48) {
+		write_atapi_register(base, ATA_REG_CTRL, tf->ctl | ATA_HOB);
+		tf->hob_feature = read_atapi_register(base, ATA_REG_ERR);
+		tf->hob_nsect = read_atapi_register(base, ATA_REG_NSECT);
+		tf->hob_lbal = read_atapi_register(base, ATA_REG_LBAL);
+		tf->hob_lbam = read_atapi_register(base, ATA_REG_LBAM);
+		tf->hob_lbah = read_atapi_register(base, ATA_REG_LBAH);
+	}
+}
+
+/**
+ *	bfin_exec_command - issue ATA command to host controller
+ *	@ap: port to which command is being issued
+ *	@tf: ATA taskfile register set
+ *
+ *	Note: Original code is ata_sff_exec_command().
+ */
+
+static void bfin_exec_command(struct ata_port *ap,
+			      const struct ata_taskfile *tf)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	dev_dbg(ap->dev, "ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+
+	write_atapi_register(base, ATA_REG_CMD, tf->command);
+	ata_sff_pause(ap);
+}
+
+/**
+ *	bfin_check_altstatus - Read device alternate status reg
+ *	@ap: port where the device is
+ */
+
+static u8 bfin_check_altstatus(struct ata_port *ap)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	return read_atapi_register(base, ATA_REG_ALTSTATUS);
+}
+
+/**
+ *	bfin_dev_select - Select device 0/1 on ATA bus
+ *	@ap: ATA channel to manipulate
+ *	@device: ATA device (numbered from zero) to select
+ *
+ *	Note: Original code is ata_sff_dev_select().
+ */
+
+static void bfin_dev_select(struct ata_port *ap, unsigned int device)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	u8 tmp;
+
+	if (device == 0)
+		tmp = ATA_DEVICE_OBS;
+	else
+		tmp = ATA_DEVICE_OBS | ATA_DEV1;
+
+	write_atapi_register(base, ATA_REG_DEVICE, tmp);
+	ata_sff_pause(ap);
+}
+
+/**
+ *	bfin_bmdma_setup - Set up IDE DMA transaction
+ *	@qc: Info associated with this ATA transaction.
+ *
+ *	Note: Original code is ata_bmdma_setup().
+ */
+
+static void bfin_bmdma_setup(struct ata_queued_cmd *qc)
+{
+	unsigned short config = WDSIZE_16;
+	struct scatterlist *sg;
+	unsigned int si;
+
+	dev_dbg(qc->ap->dev, "in atapi dma setup\n");
+	/* Program the ATA_CTRL register with dir */
+	if (qc->tf.flags & ATA_TFLAG_WRITE) {
+		/* fill the ATAPI DMA controller */
+		set_dma_config(CH_ATAPI_TX, config);
+		set_dma_x_modify(CH_ATAPI_TX, 2);
+		for_each_sg(qc->sg, sg, qc->n_elem, si) {
+			set_dma_start_addr(CH_ATAPI_TX, sg_dma_address(sg));
+			set_dma_x_count(CH_ATAPI_TX, sg_dma_len(sg) >> 1);
+		}
+	} else {
+		config |= WNR;
+		/* fill the ATAPI DMA controller */
+		set_dma_config(CH_ATAPI_RX, config);
+		set_dma_x_modify(CH_ATAPI_RX, 2);
+		for_each_sg(qc->sg, sg, qc->n_elem, si) {
+			set_dma_start_addr(CH_ATAPI_RX, sg_dma_address(sg));
+			set_dma_x_count(CH_ATAPI_RX, sg_dma_len(sg) >> 1);
+		}
+	}
+}
+
+/**
+ *	bfin_bmdma_start - Start an IDE DMA transaction
+ *	@qc: Info associated with this ATA transaction.
+ *
+ *	Note: Original code is ata_bmdma_start().
+ */
+
+static void bfin_bmdma_start(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	struct scatterlist *sg;
+	unsigned int si;
+
+	dev_dbg(qc->ap->dev, "in atapi dma start\n");
+	if (!(ap->udma_mask || ap->mwdma_mask))
+		return;
+
+	/* start ATAPI DMA controller*/
+	if (qc->tf.flags & ATA_TFLAG_WRITE) {
+		/*
+		 * On blackfin arch, uncacheable memory is not
+		 * allocated with flag GFP_DMA. DMA buffer from
+		 * common kenel code should be flushed if WB
+		 * data cache is enabled. Otherwise, this loop
+		 * is an empty loop and optimized out.
+		 */
+		for_each_sg(qc->sg, sg, qc->n_elem, si) {
+			flush_dcache_range(sg_dma_address(sg),
+				sg_dma_address(sg) + sg_dma_len(sg));
+		}
+		enable_dma(CH_ATAPI_TX);
+		dev_dbg(qc->ap->dev, "enable udma write\n");
+
+		/* Send ATA DMA write command */
+		bfin_exec_command(ap, &qc->tf);
+
+		/* set ATA DMA write direction */
+		ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base)
+			| XFER_DIR));
+	} else {
+		enable_dma(CH_ATAPI_RX);
+		dev_dbg(qc->ap->dev, "enable udma read\n");
+
+		/* Send ATA DMA read command */
+		bfin_exec_command(ap, &qc->tf);
+
+		/* set ATA DMA read direction */
+		ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base)
+			& ~XFER_DIR));
+	}
+
+	/* Reset all transfer count */
+	ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST);
+
+	/* Set ATAPI state machine contorl in terminate sequence */
+	ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | END_ON_TERM);
+
+	/* Set transfer length to buffer len */
+	for_each_sg(qc->sg, sg, qc->n_elem, si) {
+		ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1));
+	}
+
+	/* Enable ATA DMA operation*/
+	if (ap->udma_mask)
+		ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base)
+			| ULTRA_START);
+	else
+		ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base)
+			| MULTI_START);
+}
+
+/**
+ *	bfin_bmdma_stop - Stop IDE DMA transfer
+ *	@qc: Command we are ending DMA for
+ */
+
+static void bfin_bmdma_stop(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct scatterlist *sg;
+	unsigned int si;
+
+	dev_dbg(qc->ap->dev, "in atapi dma stop\n");
+	if (!(ap->udma_mask || ap->mwdma_mask))
+		return;
+
+	/* stop ATAPI DMA controller*/
+	if (qc->tf.flags & ATA_TFLAG_WRITE)
+		disable_dma(CH_ATAPI_TX);
+	else {
+		disable_dma(CH_ATAPI_RX);
+		if (ap->hsm_task_state & HSM_ST_LAST) {
+			/*
+			 * On blackfin arch, uncacheable memory is not
+			 * allocated with flag GFP_DMA. DMA buffer from
+			 * common kenel code should be invalidated if
+			 * data cache is enabled. Otherwise, this loop
+			 * is an empty loop and optimized out.
+			 */
+			for_each_sg(qc->sg, sg, qc->n_elem, si) {
+				invalidate_dcache_range(
+					sg_dma_address(sg),
+					sg_dma_address(sg)
+					+ sg_dma_len(sg));
+			}
+		}
+	}
+}
+
+/**
+ *	bfin_devchk - PATA device presence detection
+ *	@ap: ATA channel to examine
+ *	@device: Device to examine (starting at zero)
+ *
+ *	Note: Original code is ata_devchk().
+ */
+
+static unsigned int bfin_devchk(struct ata_port *ap,
+				unsigned int device)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	u8 nsect, lbal;
+
+	bfin_dev_select(ap, device);
+
+	write_atapi_register(base, ATA_REG_NSECT, 0x55);
+	write_atapi_register(base, ATA_REG_LBAL, 0xaa);
+
+	write_atapi_register(base, ATA_REG_NSECT, 0xaa);
+	write_atapi_register(base, ATA_REG_LBAL, 0x55);
+
+	write_atapi_register(base, ATA_REG_NSECT, 0x55);
+	write_atapi_register(base, ATA_REG_LBAL, 0xaa);
+
+	nsect = read_atapi_register(base, ATA_REG_NSECT);
+	lbal = read_atapi_register(base, ATA_REG_LBAL);
+
+	if ((nsect == 0x55) && (lbal == 0xaa))
+		return 1;	/* we found a device */
+
+	return 0;		/* nothing found */
+}
+
+/**
+ *	bfin_bus_post_reset - PATA device post reset
+ *
+ *	Note: Original code is ata_bus_post_reset().
+ */
+
+static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	unsigned int dev0 = devmask & (1 << 0);
+	unsigned int dev1 = devmask & (1 << 1);
+	unsigned long deadline;
+
+	/* if device 0 was found in ata_devchk, wait for its
+	 * BSY bit to clear
+	 */
+	if (dev0)
+		ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+
+	/* if device 1 was found in ata_devchk, wait for
+	 * register access, then wait for BSY to clear
+	 */
+	deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT);
+	while (dev1) {
+		u8 nsect, lbal;
+
+		bfin_dev_select(ap, 1);
+		nsect = read_atapi_register(base, ATA_REG_NSECT);
+		lbal = read_atapi_register(base, ATA_REG_LBAL);
+		if ((nsect == 1) && (lbal == 1))
+			break;
+		if (time_after(jiffies, deadline)) {
+			dev1 = 0;
+			break;
+		}
+		msleep(50);	/* give drive a breather */
+	}
+	if (dev1)
+		ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+
+	/* is all this really necessary? */
+	bfin_dev_select(ap, 0);
+	if (dev1)
+		bfin_dev_select(ap, 1);
+	if (dev0)
+		bfin_dev_select(ap, 0);
+}
+
+/**
+ *	bfin_bus_softreset - PATA device software reset
+ *
+ *	Note: Original code is ata_bus_softreset().
+ */
+
+static unsigned int bfin_bus_softreset(struct ata_port *ap,
+				       unsigned int devmask)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+
+	/* software reset.  causes dev0 to be selected */
+	write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
+	udelay(20);
+	write_atapi_register(base, ATA_REG_CTRL, ap->ctl | ATA_SRST);
+	udelay(20);
+	write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
+
+	/* spec mandates ">= 2ms" before checking status.
+	 * We wait 150ms, because that was the magic delay used for
+	 * ATAPI devices in Hale Landis's ATADRVR, for the period of time
+	 * between when the ATA command register is written, and then
+	 * status is checked.  Because waiting for "a while" before
+	 * checking status is fine, post SRST, we perform this magic
+	 * delay here as well.
+	 *
+	 * Old drivers/ide uses the 2mS rule and then waits for ready
+	 */
+	msleep(150);
+
+	/* Before we perform post reset processing we want to see if
+	 * the bus shows 0xFF because the odd clown forgets the D7
+	 * pulldown resistor.
+	 */
+	if (bfin_check_status(ap) == 0xFF)
+		return 0;
+
+	bfin_bus_post_reset(ap, devmask);
+
+	return 0;
+}
+
+/**
+ *	bfin_softreset - reset host port via ATA SRST
+ *	@ap: port to reset
+ *	@classes: resulting classes of attached devices
+ *
+ *	Note: Original code is ata_sff_softreset().
+ */
+
+static int bfin_softreset(struct ata_link *link, unsigned int *classes,
+			  unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+	unsigned int devmask = 0, err_mask;
+	u8 err;
+
+	/* determine if device 0/1 are present */
+	if (bfin_devchk(ap, 0))
+		devmask |= (1 << 0);
+	if (slave_possible && bfin_devchk(ap, 1))
+		devmask |= (1 << 1);
+
+	/* select device 0 again */
+	bfin_dev_select(ap, 0);
+
+	/* issue bus reset */
+	err_mask = bfin_bus_softreset(ap, devmask);
+	if (err_mask) {
+		ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
+				err_mask);
+		return -EIO;
+	}
+
+	/* determine by signature whether we have ATA or ATAPI devices */
+	classes[0] = ata_sff_dev_classify(&ap->link.device[0],
+				devmask & (1 << 0), &err);
+	if (slave_possible && err != 0x81)
+		classes[1] = ata_sff_dev_classify(&ap->link.device[1],
+					devmask & (1 << 1), &err);
+
+	return 0;
+}
+
+/**
+ *	bfin_bmdma_status - Read IDE DMA status
+ *	@ap: Port associated with this ATA transaction.
+ */
+
+static unsigned char bfin_bmdma_status(struct ata_port *ap)
+{
+	unsigned char host_stat = 0;
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	unsigned short int_status = ATAPI_GET_INT_STATUS(base);
+
+	if (ATAPI_GET_STATUS(base) & (MULTI_XFER_ON|ULTRA_XFER_ON))
+		host_stat |= ATA_DMA_ACTIVE;
+	if (int_status & (MULTI_DONE_INT|UDMAIN_DONE_INT|UDMAOUT_DONE_INT|
+		ATAPI_DEV_INT))
+		host_stat |= ATA_DMA_INTR;
+	if (int_status & (MULTI_TERM_INT|UDMAIN_TERM_INT|UDMAOUT_TERM_INT))
+		host_stat |= ATA_DMA_ERR|ATA_DMA_INTR;
+
+	dev_dbg(ap->dev, "ATAPI: host_stat=0x%x\n", host_stat);
+
+	return host_stat;
+}
+
+/**
+ *	bfin_data_xfer - Transfer data by PIO
+ *	@adev: device for this I/O
+ *	@buf: data buffer
+ *	@buflen: buffer length
+ *	@write_data: read/write
+ *
+ *	Note: Original code is ata_sff_data_xfer().
+ */
+
+static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
+				   unsigned int buflen, int rw)
+{
+	struct ata_port *ap = dev->link->ap;
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	unsigned int words = buflen >> 1;
+	unsigned short *buf16 = (u16 *)buf;
+
+	/* Transfer multiple of 2 bytes */
+	if (rw == READ)
+		read_atapi_data(base, words, buf16);
+	else
+		write_atapi_data(base, words, buf16);
+
+	/* Transfer trailing 1 byte, if any. */
+	if (unlikely(buflen & 0x01)) {
+		unsigned short align_buf[1] = { 0 };
+		unsigned char *trailing_buf = buf + buflen - 1;
+
+		if (rw == READ) {
+			read_atapi_data(base, 1, align_buf);
+			memcpy(trailing_buf, align_buf, 1);
+		} else {
+			memcpy(align_buf, trailing_buf, 1);
+			write_atapi_data(base, 1, align_buf);
+		}
+		words++;
+	}
+
+	return words << 1;
+}
+
+/**
+ *	bfin_irq_clear - Clear ATAPI interrupt.
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Note: Original code is ata_sff_irq_clear().
+ */
+
+static void bfin_irq_clear(struct ata_port *ap)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+
+	dev_dbg(ap->dev, "in atapi irq clear\n");
+	ATAPI_SET_INT_STATUS(base, ATAPI_GET_INT_STATUS(base)|ATAPI_DEV_INT
+		| MULTI_DONE_INT | UDMAIN_DONE_INT | UDMAOUT_DONE_INT
+		| MULTI_TERM_INT | UDMAIN_TERM_INT | UDMAOUT_TERM_INT);
+}
+
+/**
+ *	bfin_irq_on - Enable interrupts on a port.
+ *	@ap: Port on which interrupts are enabled.
+ *
+ *	Note: Original code is ata_sff_irq_on().
+ */
+
+static unsigned char bfin_irq_on(struct ata_port *ap)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+	u8 tmp;
+
+	dev_dbg(ap->dev, "in atapi irq on\n");
+	ap->ctl &= ~ATA_NIEN;
+	ap->last_ctl = ap->ctl;
+
+	write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
+	tmp = ata_wait_idle(ap);
+
+	bfin_irq_clear(ap);
+
+	return tmp;
+}
+
+/**
+ *	bfin_freeze - Freeze DMA controller port
+ *	@ap: port to freeze
+ *
+ *	Note: Original code is ata_sff_freeze().
+ */
+
+static void bfin_freeze(struct ata_port *ap)
+{
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+
+	dev_dbg(ap->dev, "in atapi dma freeze\n");
+	ap->ctl |= ATA_NIEN;
+	ap->last_ctl = ap->ctl;
+
+	write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
+
+	/* Under certain circumstances, some controllers raise IRQ on
+	 * ATA_NIEN manipulation.  Also, many controllers fail to mask
+	 * previously pending IRQ on ATA_NIEN assertion.  Clear it.
+	 */
+	ap->ops->sff_check_status(ap);
+
+	bfin_irq_clear(ap);
+}
+
+/**
+ *	bfin_thaw - Thaw DMA controller port
+ *	@ap: port to thaw
+ *
+ *	Note: Original code is ata_sff_thaw().
+ */
+
+void bfin_thaw(struct ata_port *ap)
+{
+	dev_dbg(ap->dev, "in atapi dma thaw\n");
+	bfin_check_status(ap);
+	bfin_irq_on(ap);
+}
+
+/**
+ *	bfin_postreset - standard postreset callback
+ *	@ap: the target ata_port
+ *	@classes: classes of attached devices
+ *
+ *	Note: Original code is ata_sff_postreset().
+ */
+
+static void bfin_postreset(struct ata_link *link, unsigned int *classes)
+{
+	struct ata_port *ap = link->ap;
+	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+
+	/* re-enable interrupts */
+	bfin_irq_on(ap);
+
+	/* is double-select really necessary? */
+	if (classes[0] != ATA_DEV_NONE)
+		bfin_dev_select(ap, 1);
+	if (classes[1] != ATA_DEV_NONE)
+		bfin_dev_select(ap, 0);
+
+	/* bail out if no device is present */
+	if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+		return;
+	}
+
+	/* set up device control */
+	write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
+}
+
+static void bfin_port_stop(struct ata_port *ap)
+{
+	dev_dbg(ap->dev, "in atapi port stop\n");
+	if (ap->udma_mask != 0 || ap->mwdma_mask != 0) {
+		free_dma(CH_ATAPI_RX);
+		free_dma(CH_ATAPI_TX);
+	}
+}
+
+static int bfin_port_start(struct ata_port *ap)
+{
+	dev_dbg(ap->dev, "in atapi port start\n");
+	if (!(ap->udma_mask || ap->mwdma_mask))
+		return 0;
+
+	if (request_dma(CH_ATAPI_RX, "BFIN ATAPI RX DMA") >= 0) {
+		if (request_dma(CH_ATAPI_TX,
+			"BFIN ATAPI TX DMA") >= 0)
+			return 0;
+
+		free_dma(CH_ATAPI_RX);
+	}
+
+	ap->udma_mask = 0;
+	ap->mwdma_mask = 0;
+	dev_err(ap->dev, "Unable to request ATAPI DMA!"
+		" Continue in PIO mode.\n");
+
+	return 0;
+}
+
+static unsigned int bfin_ata_host_intr(struct ata_port *ap,
+				   struct ata_queued_cmd *qc)
+{
+	struct ata_eh_info *ehi = &ap->link.eh_info;
+	u8 status, host_stat = 0;
+
+	VPRINTK("ata%u: protocol %d task_state %d\n",
+		ap->print_id, qc->tf.protocol, ap->hsm_task_state);
+
+	/* Check whether we are expecting interrupt in this state */
+	switch (ap->hsm_task_state) {
+	case HSM_ST_FIRST:
+		/* Some pre-ATAPI-4 devices assert INTRQ
+		 * at this state when ready to receive CDB.
+		 */
+
+		/* Check the ATA_DFLAG_CDB_INTR flag is enough here.
+		 * The flag was turned on only for atapi devices.
+		 * No need to check is_atapi_taskfile(&qc->tf) again.
+		 */
+		if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+			goto idle_irq;
+		break;
+	case HSM_ST_LAST:
+		if (qc->tf.protocol == ATA_PROT_DMA ||
+		    qc->tf.protocol == ATAPI_PROT_DMA) {
+			/* check status of DMA engine */
+			host_stat = ap->ops->bmdma_status(ap);
+			VPRINTK("ata%u: host_stat 0x%X\n",
+				ap->print_id, host_stat);
+
+			/* if it's not our irq... */
+			if (!(host_stat & ATA_DMA_INTR))
+				goto idle_irq;
+
+			/* before we do anything else, clear DMA-Start bit */
+			ap->ops->bmdma_stop(qc);
+
+			if (unlikely(host_stat & ATA_DMA_ERR)) {
+				/* error when transfering data to/from memory */
+				qc->err_mask |= AC_ERR_HOST_BUS;
+				ap->hsm_task_state = HSM_ST_ERR;
+			}
+		}
+		break;
+	case HSM_ST:
+		break;
+	default:
+		goto idle_irq;
+	}
+
+	/* check altstatus */
+	status = ap->ops->sff_check_altstatus(ap);
+	if (status & ATA_BUSY)
+		goto busy_ata;
+
+	/* check main status, clearing INTRQ */
+	status = ap->ops->sff_check_status(ap);
+	if (unlikely(status & ATA_BUSY))
+		goto busy_ata;
+
+	/* ack bmdma irq events */
+	ap->ops->sff_irq_clear(ap);
+
+	ata_sff_hsm_move(ap, qc, status, 0);
+
+	if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
+				       qc->tf.protocol == ATAPI_PROT_DMA))
+		ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+
+busy_ata:
+	return 1;	/* irq handled */
+
+idle_irq:
+	ap->stats.idle_irq++;
+
+#ifdef ATA_IRQ_TRAP
+	if ((ap->stats.idle_irq % 1000) == 0) {
+		ap->ops->irq_ack(ap, 0); /* debug trap */
+		ata_port_printk(ap, KERN_WARNING, "irq trap\n");
+		return 1;
+	}
+#endif
+	return 0;	/* irq not handled */
+}
+
+static irqreturn_t bfin_ata_interrupt(int irq, void *dev_instance)
+{
+	struct ata_host *host = dev_instance;
+	unsigned int i;
+	unsigned int handled = 0;
+	unsigned long flags;
+
+	/* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
+	spin_lock_irqsave(&host->lock, flags);
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap;
+
+		ap = host->ports[i];
+		if (ap &&
+		    !(ap->flags & ATA_FLAG_DISABLED)) {
+			struct ata_queued_cmd *qc;
+
+			qc = ata_qc_from_tag(ap, ap->link.active_tag);
+			if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+			    (qc->flags & ATA_QCFLAG_ACTIVE))
+				handled |= bfin_ata_host_intr(ap, qc);
+		}
+	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return IRQ_RETVAL(handled);
+}
+
+
+static struct scsi_host_template bfin_sht = {
+	ATA_BASE_SHT(DRV_NAME),
+	.sg_tablesize		= SG_NONE,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+};
+
+static struct ata_port_operations bfin_pata_ops = {
+	.inherits		= &ata_sff_port_ops,
+
+	.set_piomode		= bfin_set_piomode,
+	.set_dmamode		= bfin_set_dmamode,
+
+	.sff_tf_load		= bfin_tf_load,
+	.sff_tf_read		= bfin_tf_read,
+	.sff_exec_command	= bfin_exec_command,
+	.sff_check_status	= bfin_check_status,
+	.sff_check_altstatus	= bfin_check_altstatus,
+	.sff_dev_select		= bfin_dev_select,
+
+	.bmdma_setup		= bfin_bmdma_setup,
+	.bmdma_start		= bfin_bmdma_start,
+	.bmdma_stop		= bfin_bmdma_stop,
+	.bmdma_status		= bfin_bmdma_status,
+	.sff_data_xfer		= bfin_data_xfer,
+
+	.qc_prep		= ata_noop_qc_prep,
+
+	.freeze			= bfin_freeze,
+	.thaw			= bfin_thaw,
+	.softreset		= bfin_softreset,
+	.postreset		= bfin_postreset,
+
+	.sff_irq_clear		= bfin_irq_clear,
+	.sff_irq_on		= bfin_irq_on,
+
+	.port_start		= bfin_port_start,
+	.port_stop		= bfin_port_stop,
+};
+
+static struct ata_port_info bfin_port_info[] = {
+	{
+		.flags		= ATA_FLAG_SLAVE_POSS
+				| ATA_FLAG_MMIO
+				| ATA_FLAG_NO_LEGACY,
+		.pio_mask	= 0x1f,	/* pio0-4 */
+		.mwdma_mask	= 0,
+		.udma_mask	= 0,
+		.port_ops	= &bfin_pata_ops,
+	},
+};
+
+/**
+ *	bfin_reset_controller - initialize BF54x ATAPI controller.
+ */
+
+static int bfin_reset_controller(struct ata_host *host)
+{
+	void __iomem *base = (void __iomem *)host->ports[0]->ioaddr.ctl_addr;
+	int count;
+	unsigned short status;
+
+	/* Disable all ATAPI interrupts */
+	ATAPI_SET_INT_MASK(base, 0);
+	SSYNC();
+
+	/* Assert the RESET signal 25us*/
+	ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | DEV_RST);
+	udelay(30);
+
+	/* Negate the RESET signal for 2ms*/
+	ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) & ~DEV_RST);
+	msleep(2);
+
+	/* Wait on Busy flag to clear */
+	count = 10000000;
+	do {
+		status = read_atapi_register(base, ATA_REG_STATUS);
+	} while (--count && (status & ATA_BUSY));
+
+	/* Enable only ATAPI Device interrupt */
+	ATAPI_SET_INT_MASK(base, 1);
+	SSYNC();
+
+	return (!count);
+}
+
+/**
+ *	atapi_io_port - define atapi peripheral port pins.
+ */
+static unsigned short atapi_io_port[] = {
+	P_ATAPI_RESET,
+	P_ATAPI_DIOR,
+	P_ATAPI_DIOW,
+	P_ATAPI_CS0,
+	P_ATAPI_CS1,
+	P_ATAPI_DMACK,
+	P_ATAPI_DMARQ,
+	P_ATAPI_INTRQ,
+	P_ATAPI_IORDY,
+	0
+};
+
+/**
+ *	bfin_atapi_probe	-	attach a bfin atapi interface
+ *	@pdev: platform device
+ *
+ *	Register a bfin atapi interface.
+ *
+ *
+ *	Platform devices are expected to contain 2 resources per port:
+ *
+ *		- I/O Base (IORESOURCE_IO)
+ *		- IRQ	   (IORESOURCE_IRQ)
+ *
+ */
+static int __devinit bfin_atapi_probe(struct platform_device *pdev)
+{
+	int board_idx = 0;
+	struct resource *res;
+	struct ata_host *host;
+	unsigned int fsclk = get_sclk();
+	int udma_mode = 5;
+	const struct ata_port_info *ppi[] =
+		{ &bfin_port_info[board_idx], NULL };
+
+	/*
+	 * Simple resource validation ..
+	 */
+	if (unlikely(pdev->num_resources != 2)) {
+		dev_err(&pdev->dev, "invalid number of resources\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Get the register base first
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL)
+		return -EINVAL;
+
+	while (bfin_port_info[board_idx].udma_mask > 0 &&
+			udma_fsclk[udma_mode] > fsclk) {
+		udma_mode--;
+		bfin_port_info[board_idx].udma_mask >>= 1;
+	}
+
+	/*
+	 * Now that that's out of the way, wire up the port..
+	 */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1);
+	if (!host)
+		return -ENOMEM;
+
+	host->ports[0]->ioaddr.ctl_addr = (void *)res->start;
+
+	if (peripheral_request_list(atapi_io_port, "atapi-io-port")) {
+		dev_err(&pdev->dev, "Requesting Peripherals faild\n");
+		return -EFAULT;
+	}
+
+	if (bfin_reset_controller(host)) {
+		peripheral_free_list(atapi_io_port);
+		dev_err(&pdev->dev, "Fail to reset ATAPI device\n");
+		return -EFAULT;
+	}
+
+	if (ata_host_activate(host, platform_get_irq(pdev, 0),
+		bfin_ata_interrupt, IRQF_SHARED, &bfin_sht) != 0) {
+		peripheral_free_list(atapi_io_port);
+		dev_err(&pdev->dev, "Fail to attach ATAPI device\n");
+		return -ENODEV;
+	}
+
+	dev_set_drvdata(&pdev->dev, host);
+
+	return 0;
+}
+
+/**
+ *	bfin_atapi_remove	-	unplug a bfin atapi interface
+ *	@pdev: platform device
+ *
+ *	A bfin atapi device has been unplugged. Perform the needed
+ *	cleanup. Also called on module unload for any active devices.
+ */
+static int __devexit bfin_atapi_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ata_host *host = dev_get_drvdata(dev);
+
+	ata_host_detach(host);
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	peripheral_free_list(atapi_io_port);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_atapi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	if (host)
+		return ata_host_suspend(host, state);
+	else
+		return 0;
+}
+
+static int bfin_atapi_resume(struct platform_device *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	if (host) {
+		ret = bfin_reset_controller(host);
+		if (ret) {
+			printk(KERN_ERR DRV_NAME ": Error during HW init\n");
+			return ret;
+		}
+		ata_host_resume(host);
+	}
+
+	return 0;
+}
+#else
+#define bfin_atapi_suspend NULL
+#define bfin_atapi_resume NULL
+#endif
+
+static struct platform_driver bfin_atapi_driver = {
+	.probe			= bfin_atapi_probe,
+	.remove			= __devexit_p(bfin_atapi_remove),
+	.suspend		= bfin_atapi_suspend,
+	.resume			= bfin_atapi_resume,
+	.driver = {
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+	},
+};
+
+#define ATAPI_MODE_SIZE		10
+static char bfin_atapi_mode[ATAPI_MODE_SIZE];
+
+static int __init bfin_atapi_init(void)
+{
+	pr_info("register bfin atapi driver\n");
+
+	switch(bfin_atapi_mode[0]) {
+	case 'p':
+	case 'P':
+		break;
+	case 'm':
+	case 'M':
+		bfin_port_info[0].mwdma_mask = ATA_MWDMA2;
+		break;
+	default:
+		bfin_port_info[0].udma_mask = ATA_UDMA5;
+	};
+
+	return platform_driver_register(&bfin_atapi_driver);
+}
+
+static void __exit bfin_atapi_exit(void)
+{
+	platform_driver_unregister(&bfin_atapi_driver);
+}
+
+module_init(bfin_atapi_init);
+module_exit(bfin_atapi_exit);
+/*
+ * ATAPI mode:
+ * pio/PIO
+ * udma/UDMA (default)
+ * mwdma/MWDMA
+ */
+module_param_string(bfin_atapi_mode, bfin_atapi_mode, ATAPI_MODE_SIZE, 0);
+
+MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
+MODULE_DESCRIPTION("PATA driver for blackfin 54x ATAPI controller");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);