summaryrefslogtreecommitdiffstats
path: root/sb600spi.c
Commit message (Collapse)AuthorAgeFilesLines
* Support reads of arbitrary rangeCarl-Daniel Hailfinger2009-06-161-2/+2
| | | | | | | | | | | | That means you can tell flashrom to read exactly bytes 12345-56789 (start 12345, length 44445) and it will not fetch a single byte more. Uwe tested this on one LPC, one SPI, and one parallel flash board. Corresponding to flashrom svn r596. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Flashrom only checks for very few chips if the erase workedCarl-Daniel Hailfinger2009-06-151-1/+4
| | | | | | | | | | | | | | | | | | | And even when it checks if the erase worked, the result of that check is often ignored. Convert all erase functions and actually check return codes almost everywhere. Check inside all erase_* routines if erase worked, not outside. erase_sector_jedec and erase_block_jedec have changed prototypes to enable erase checking. Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box. Corresponding to flashrom svn r595. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Every SPI host controller implemented its own way to read flash chipsCarl-Daniel Hailfinger2009-06-131-8/+2
| | | | | | | | | | | | | | | | | | | | | | This was partly due to a design problem in the abstraction layer. There should be exactly two different functions for reading SPI chips: - memory mapped reads - SPI command reads. Each of them should be contained in a separate function, optionally taking parameters where needed. This patch solves the problems mentioned above, shortens the code and makes the code logic a lot more obvious. Since open-coding the min() function leads to errors, include it in this patch as well. Corresponding to flashrom svn r589. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Ronald G. Minnich <rminnich@gmail.com>
* Add bus type annotation to struct flashchipsCarl-Daniel Hailfinger2009-05-311-4/+4
| | | | | | | | | | | | | | | | | | | Right now, the annotation only differentiates between SPI and non-SPI. Anyone who knows more about a specific flash chip should feel free to update it. The existing flashbus variable was abused to denote the SPI controller type. Use an aptly named variable for that purpose. Once this patch is merged, the chipset/programmer init functions can set supported flash chip types and flashrom can automatically select only matching probe/read/erase/write functions. A side benefit of that will be the elimination of the Winbond W29EE011 vs. AMIC A49LF040A conflict. Corresponding to flashrom svn r556. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Use accessor functions for MMIOCarl-Daniel Hailfinger2009-05-171-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some MMIO accesses used volatile, others didn't (and risked non-execution of side effects) and even with volatile, some accesses looked dubious. Since the MMIO accessor functions and the onboard flash accessor functions are functionally identical (but have different signatures), make the flash accessors wrappers for the MMIO accessors. For some of the conversions, I used Coccinelle. Semantic patch follows: @@ typedef uint8_t; expression a; volatile uint8_t *b; @@ - b[a] + *(b + a) @@ expression a; volatile uint8_t *b; @@ - *(b) |= (a); + *(b) = *(b) | (a); @@ expression a; volatile uint8_t *b; @@ - *(b) = (a); + mmio_writeb(a, b); @@ volatile uint8_t *b; @@ - *(b) + mmio_readb(b) @@ type T; T b; @@ ( mmio_readb | mmio_writeb ) (..., - (T) - (b) + b ) Corresponding to flashrom svn r524. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Uwe tested read, write, erase with this patch on a random board to make sure nothing breaks. Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Drop unused/duplicated #includes and some dead codeUwe Hermann2009-05-161-3/+0
| | | | | | | | | Build-tested on 32bit x86. Corresponding to flashrom svn r521. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Chips like the SST SST25VF080B can only handle single byte writes outside ↵Carl-Daniel Hailfinger2009-05-091-1/+1
| | | | | | | | | | | | | | | | | | AAI mode Change SPI architecture to handle 1-byte chunk chip writing differently from 256-byte chunk chip writing. Annotate SPI chip write functions with _256 or _1 suffix denoting the number of bytes they write at maximum. The 1-byte chunk writing is cut-n-pasted to different SPI drivers right now. A later patch can move them to the generic spi_chip_write_1. Corresponding to flashrom svn r485. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refine handling of spi_write_enable() failures to fix chip erases on ichspiCarl-Daniel Hailfinger2009-05-091-1/+4
| | | | | | | | | | | | | | | Until the ICH SPI driver can handle preopcodes as standalone opcodes, we should handle such special opcode failure gracefully on ICH and compatible chipsets. This fixes chip erase on almost all ICH+VIA SPI masters. Thanks to Ali Nadalizadeh for helping track down this bug! Corresponding to flashrom svn r484. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix typoUwe Hermann2009-04-131-1/+1
| | | | | | | | | Add missing copyright year. Corresponding to flashrom svn r428 and coreboot v2 svn r4107. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Copyright update by Jason Wang for freshly written sb600 codeJason Wang2008-11-291-3/+3
| | | | | | | | Corresponding to flashrom svn r354 and coreboot v2 svn r3782. Signed-off-by: Jason Wang <Qingpei.wang@amd.com> Reviewed-by: Joe, Bao <Zheng.Bao@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Add support for the AMD/ATI SB600 southbridge SPI functionalityJason Wang2008-11-281-0/+175
This has been tested by Uwe Hermann on an RS690/SB600 board. Corresponding to flashrom svn r351 and coreboot v2 svn r3779. Signed-off-by: Jason Wang <Qingpei.Wang@amd.com> Reviewed-by: Joe Bao <zheng.bao@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
OpenPOWER on IntegriCloud