Add support for SFDP (JESD216)

Similar to modules using the opaque programmer framework (e.g. ICH Hardware
Sequencing) this uses a template struct flashchip element in flashchips.c with
a special probe function that fills the obtained values into that struct.

This allows yet unknown SPI chips to be supported (read, erase, write) almost
as if it was already added to flashchips.c.

Documentation used:
http://www.jedec.org/standards-documents/docs/jesd216 (2011-04)
W25Q32BV data sheet Revision F (2011-04-01)
EN25QH16 data sheet Revision F (2011-06-01)
MX25L6436E data sheet Revision 1.8 (2011-12-26)

Tested-by: David Hendricks <dhendrix@google.com>
on W25Q64CV + dediprog
Tested-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
on a 2010 MX25L6436E with preliminary (i.e. incorrect) SFDP implementation + serprog

Thanks also to Michael Karcher for his comments and preliminary review!

Corresponding to flashrom svn r1500.

Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>

1 files changed, 5 insertions, 0 deletions

diff --git a/spi.h b/spi.h
index b908603..5f07eae 100644
--- a/spi.h
+++ b/spi.h
@@ -40,6 +40,11 @@
 #define JEDEC_REMS_OUTSIZE	0x04
 #define JEDEC_REMS_INSIZE	0x02
 
+/* Read Serial Flash Discoverable Parameters (SFDP) */
+#define JEDEC_SFDP		0x5a
+#define JEDEC_SFDP_OUTSIZE	0x05	/* 8b op, 24b addr, 8b dummy */
+/*      JEDEC_SFDP_INSIZE : any length */
+
 /* Read Electronic Signature */
 #define JEDEC_RES		0xab
 #define JEDEC_RES_OUTSIZE	0x04