summaryrefslogtreecommitdiffstats
path: root/sys/dev/isp/isp_target.c
blob: 05a844688fe973253bf889cdfd055cb422188a8d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
/* $FreeBSD$ */
/*
 * Machine and OS Independent Target Mode Code for the Qlogic SCSI/FC adapters.
 *
 * Copyright (c) 1999, 2000, 2001 by Matthew Jacob
 * All rights reserved.
 * mjacob@feral.com
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice immediately at the beginning of the file, without modification,
 *    this list of conditions, and the following disclaimer.
 * 2. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/*
 * Bug fixes gratefully acknowledged from:
 *	Oded Kedem <oded@kashya.com>
 */
/*
 * Include header file appropriate for platform we're building on.
 */

#ifdef	__NetBSD__
#include <dev/ic/isp_netbsd.h>
#endif
#ifdef	__FreeBSD__
#include <dev/isp/isp_freebsd.h>
#endif
#ifdef	__OpenBSD__
#include <dev/ic/isp_openbsd.h>
#endif
#ifdef	__linux__
#include "isp_linux.h"
#endif

#ifdef	ISP_TARGET_MODE
static const char atiocope[] =
    "ATIO returned for lun %d because it was in the middle of Bus Device Reset "
    "on bus %d";
static const char atior[] =
    "ATIO returned on for lun %d on from IID %d because a Bus Reset occurred "
    "on bus %d";

static void isp_got_msg(struct ispsoftc *, int, in_entry_t *);
static void isp_got_msg_fc(struct ispsoftc *, int, in_fcentry_t *);
static void isp_notify_ack(struct ispsoftc *, void *);
static void isp_handle_atio(struct ispsoftc *, at_entry_t *);
static void isp_handle_atio2(struct ispsoftc *, at2_entry_t *);
static void isp_handle_ctio(struct ispsoftc *, ct_entry_t *);
static void isp_handle_ctio2(struct ispsoftc *, ct2_entry_t *);

/*
 * The Qlogic driver gets an interrupt to look at response queue entries.
 * Some of these are status completions for initiatior mode commands, but
 * if target mode is enabled, we get a whole wad of response queue entries
 * to be handled here.
 *
 * Basically the split into 3 main groups: Lun Enable/Modification responses,
 * SCSI Command processing, and Immediate Notification events.
 *
 * You start by writing a request queue entry to enable target mode (and
 * establish some resource limitations which you can modify later).
 * The f/w responds with a LUN ENABLE or LUN MODIFY response with
 * the status of this action. If the enable was successful, you can expect...
 *
 * Response queue entries with SCSI commands encapsulate show up in an ATIO
 * (Accept Target IO) type- sometimes with enough info to stop the command at
 * this level. Ultimately the driver has to feed back to the f/w's request
 * queue a sequence of CTIOs (continue target I/O) that describe data to
 * be moved and/or status to be sent) and finally finishing with sending
 * to the f/w's response queue an ATIO which then completes the handshake
 * with the f/w for that command. There's a lot of variations on this theme,
 * including flags you can set in the CTIO for the Qlogic 2X00 fibre channel
 * cards that 'auto-replenish' the f/w's ATIO count, but this is the basic
 * gist of it.
 *
 * The third group that can show up in the response queue are Immediate
 * Notification events. These include things like notifications of SCSI bus
 * resets, or Bus Device Reset messages or other messages received. This
 * a classic oddbins area. It can get  a little weird because you then turn
 * around and acknowledge the Immediate Notify by writing an entry onto the
 * request queue and then the f/w turns around and gives you an acknowledgement
 * to *your* acknowledgement on the response queue (the idea being to let
 * the f/w tell you when the event is *really* over I guess).
 *
 */


/*
 * A new response queue entry has arrived. The interrupt service code
 * has already swizzled it into the platform dependent from canonical form.
 *
 * Because of the way this driver is designed, unfortunately most of the
 * actual synchronization work has to be done in the platform specific
 * code- we have no synchroniation primitives in the common code.
 */

int
isp_target_notify(struct ispsoftc *isp, void *vptr, u_int16_t *optrp)
{
	u_int16_t status, seqid;
	union {
		at_entry_t	*atiop;
		at2_entry_t	*at2iop;
		ct_entry_t	*ctiop;
		ct2_entry_t	*ct2iop;
		lun_entry_t	*lunenp;
		in_entry_t	*inotp;
		in_fcentry_t	*inot_fcp;
		na_entry_t	*nackp;
		na_fcentry_t	*nack_fcp;
		isphdr_t	*hp;
		void *		*vp;
#define	atiop		unp.atiop
#define	at2iop		unp.at2iop
#define	ctiop		unp.ctiop
#define	ct2iop		unp.ct2iop
#define	lunenp		unp.lunenp
#define	inotp		unp.inotp
#define	inot_fcp	unp.inot_fcp
#define	nackp		unp.nackp
#define	nack_fcp	unp.nack_fcp
#define	hdrp		unp.hp
	} unp;
	u_int8_t local[QENTRY_LEN];
	int bus, type, rval = 0;

	type = isp_get_response_type(isp, (isphdr_t *)vptr);
	unp.vp = vptr;

	ISP_TDQE(isp, "isp_target_notify", (int) *optrp, vptr);

	switch(type) {
	case RQSTYPE_ATIO:
		isp_get_atio(isp, atiop, (at_entry_t *) local);
		isp_handle_atio(isp, (at_entry_t *) local);
		break;
	case RQSTYPE_CTIO:
		isp_get_ctio(isp, ctiop, (ct_entry_t *) local);
		isp_handle_ctio(isp, (ct_entry_t *) local);
		break;
	case RQSTYPE_ATIO2:
		isp_get_atio2(isp, at2iop, (at2_entry_t *) local);
		isp_handle_atio2(isp, (at2_entry_t *) local);
		break;
	case RQSTYPE_CTIO2:
		isp_get_ctio2(isp, ct2iop, (ct2_entry_t *) local);
		isp_handle_ctio2(isp, (ct2_entry_t *) local);
		break;
	case RQSTYPE_ENABLE_LUN:
	case RQSTYPE_MODIFY_LUN:
		isp_get_enable_lun(isp, lunenp, (lun_entry_t *) local);
		(void) isp_async(isp, ISPASYNC_TARGET_ACTION, local);
		break;

	case RQSTYPE_NOTIFY:
		/*
		 * Either the ISP received a SCSI message it can't
		 * handle, or it's returning an Immed. Notify entry
		 * we sent. We can send Immed. Notify entries to
		 * increment the firmware's resource count for them
		 * (we set this initially in the Enable Lun entry).
		 */
		bus = 0;
		if (IS_FC(isp)) {
			isp_get_notify_fc(isp, inot_fcp, (in_fcentry_t *)local);
			inot_fcp = (in_fcentry_t *) local;
			status = inot_fcp->in_status;
			seqid = inot_fcp->in_seqid;
		} else {
			isp_get_notify(isp, inotp, (in_entry_t *)local);
			inotp = (in_entry_t *) local;
			status = inotp->in_status & 0xff;
			seqid = inotp->in_seqid;
			if (IS_DUALBUS(isp)) {
				bus = GET_BUS_VAL(inotp->in_iid);
				SET_BUS_VAL(inotp->in_iid, 0);
			}
		}
		isp_prt(isp, ISP_LOGTDEBUG0,
		    "Immediate Notify On Bus %d, status=0x%x seqid=0x%x",
		    bus, status, seqid);

		/*
		 * ACK it right away.
		 */
		isp_notify_ack(isp, (status == IN_RESET)? NULL : local);
		switch (status) {
		case IN_RESET:
			(void) isp_async(isp, ISPASYNC_BUS_RESET, &bus);
			break;
		case IN_MSG_RECEIVED:
		case IN_IDE_RECEIVED:
			if (IS_FC(isp)) {
				isp_got_msg_fc(isp, bus, (in_fcentry_t *)local);
			} else {
				isp_got_msg(isp, bus, (in_entry_t *)local);
			}
			break;
		case IN_RSRC_UNAVAIL:
			isp_prt(isp, ISP_LOGWARN, "Firmware out of ATIOs");
			break;
		case IN_ABORT_TASK:
			isp_prt(isp, ISP_LOGWARN,
			    "Abort Task from IID %d RX_ID 0x%x",
			    inot_fcp->in_iid, seqid);
			(void) isp_async(isp, ISPASYNC_TARGET_ACTION, &bus);
			break;
		case IN_PORT_LOGOUT:
			isp_prt(isp, ISP_LOGWARN,
			    "Port Logout for Initiator %d RX_ID 0x%x",
			    inot_fcp->in_iid, seqid);
			break;
		case IN_PORT_CHANGED:
			isp_prt(isp, ISP_LOGWARN,
			    "Port Changed for Initiator %d RX_ID 0x%x",
			    inot_fcp->in_iid, seqid);
			break;
		case IN_GLOBAL_LOGO:
			isp_prt(isp, ISP_LOGWARN, "All ports logged out");
			break;
		default:
			isp_prt(isp, ISP_LOGERR,
			    "bad status (0x%x) in isp_target_notify", status);
			break;
		}
		break;

	case RQSTYPE_NOTIFY_ACK:
		/*
		 * The ISP is acknowledging our acknowledgement of an
		 * Immediate Notify entry for some asynchronous event.
		 */
		if (IS_FC(isp)) {
			isp_get_notify_ack_fc(isp, nack_fcp,
			    (na_fcentry_t *)local);
			nack_fcp = (na_fcentry_t *)local;
			isp_prt(isp, ISP_LOGTDEBUG1,
			    "Notify Ack status=0x%x seqid 0x%x",
			    nack_fcp->na_status, nack_fcp->na_seqid);
		} else {
			isp_get_notify_ack(isp, nackp, (na_entry_t *)local);
			nackp = (na_entry_t *)local;
			isp_prt(isp, ISP_LOGTDEBUG1,
			    "Notify Ack event 0x%x status=0x%x seqid 0x%x",
			    nackp->na_event, nackp->na_status, nackp->na_seqid);
		}
		break;
	default:
		isp_prt(isp, ISP_LOGERR,
		    "Unknown entry type 0x%x in isp_target_notify", type);
		rval = -1;
		break;
	}
#undef	atiop
#undef	at2iop
#undef	ctiop
#undef	ct2iop
#undef	lunenp
#undef	inotp
#undef	inot_fcp
#undef	nackp
#undef	nack_fcp
#undef	hdrp
	return (rval);
}

 
/*
 * Toggle (on/off) target mode for bus/target/lun
 *
 * The caller has checked for overlap and legality.
 *
 * Note that not all of bus, target or lun can be paid attention to.
 * Note also that this action will not be complete until the f/w writes
 * response entry. The caller is responsible for synchronizing this.
 */
int
isp_lun_cmd(struct ispsoftc *isp, int cmd, int bus, int tgt, int lun,
    int cmd_cnt, int inot_cnt, u_int32_t opaque)
{
	lun_entry_t el;
	u_int16_t nxti, optr;
	void *outp;


	MEMZERO(&el, sizeof (el));
	if (IS_DUALBUS(isp)) {
		el.le_rsvd = (bus & 0x1) << 7;
	}
	el.le_cmd_count = cmd_cnt;
	el.le_in_count = inot_cnt;
	if (cmd == RQSTYPE_ENABLE_LUN) {
		if (IS_SCSI(isp)) {
			el.le_flags = LUN_TQAE|LUN_DISAD;
			el.le_cdb6len = 12;
			el.le_cdb7len = 12;
		}
	} else if (cmd == -RQSTYPE_ENABLE_LUN) {
		cmd = RQSTYPE_ENABLE_LUN;
		el.le_cmd_count = 0;
		el.le_in_count = 0;
	} else if (cmd == -RQSTYPE_MODIFY_LUN) {
		cmd = RQSTYPE_MODIFY_LUN;
		el.le_ops = LUN_CCDECR | LUN_INDECR;
	} else {
		el.le_ops = LUN_CCINCR | LUN_ININCR;
	}
	el.le_header.rqs_entry_type = cmd;
	el.le_header.rqs_entry_count = 1;
	el.le_reserved = opaque;
	if (IS_SCSI(isp)) {
		el.le_tgt = tgt;
		el.le_lun = lun;
	} else if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) == 0) {
		el.le_lun = lun;
	}
	el.le_timeout = 2;

	if (isp_getrqentry(isp, &nxti, &optr, &outp)) {
		isp_prt(isp, ISP_LOGERR,
		    "Request Queue Overflow in isp_lun_cmd");
		return (-1);
	}
	ISP_TDQE(isp, "isp_lun_cmd", (int) optr, &el);
	isp_put_enable_lun(isp, &el, outp);
	ISP_ADD_REQUEST(isp, nxti);
	return (0);
}


int
isp_target_put_entry(struct ispsoftc *isp, void *ap)
{
	void *outp;
	u_int16_t nxti, optr;
	u_int8_t etype = ((isphdr_t *) ap)->rqs_entry_type;

	if (isp_getrqentry(isp, &nxti, &optr, &outp)) {
		isp_prt(isp, ISP_LOGWARN,
		    "Request Queue Overflow in isp_target_put_entry");
		return (-1);
	}
	switch (etype) {
	case RQSTYPE_ATIO:
		isp_put_atio(isp, (at_entry_t *) ap, (at_entry_t *) outp);
		break;
	case RQSTYPE_ATIO2:
		isp_put_atio2(isp, (at2_entry_t *) ap, (at2_entry_t *) outp);
		break;
	case RQSTYPE_CTIO:
		isp_put_ctio(isp, (ct_entry_t *) ap, (ct_entry_t *) outp);
		break;
	case RQSTYPE_CTIO2:
		isp_put_ctio2(isp, (ct2_entry_t *) ap, (ct2_entry_t *) outp);
		break;
	default:
		isp_prt(isp, ISP_LOGERR,
		    "Unknown type 0x%x in isp_put_entry", etype);
		return (-1);
	}

	ISP_TDQE(isp, "isp_target_put_entry", (int) optr, ap);;
	ISP_ADD_REQUEST(isp, nxti);
	return (0);
}

int
isp_target_put_atio(struct ispsoftc *isp, void *arg)
{
	union {
		at_entry_t _atio;
		at2_entry_t _atio2;
	} atun;

	MEMZERO(&atun, sizeof atun);
	if (IS_FC(isp)) {
		at2_entry_t *aep = arg;
		atun._atio2.at_header.rqs_entry_type = RQSTYPE_ATIO2;
		atun._atio2.at_header.rqs_entry_count = 1;
		if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
			atun._atio2.at_scclun = (u_int16_t) aep->at_scclun;
		} else {
			atun._atio2.at_lun = (u_int8_t) aep->at_lun;
		}
		atun._atio2.at_status = CT_OK;
	} else {
		at_entry_t *aep = arg;
		atun._atio.at_header.rqs_entry_type = RQSTYPE_ATIO;
		atun._atio.at_header.rqs_entry_count = 1;
		atun._atio.at_handle = aep->at_handle;
		atun._atio.at_iid = aep->at_iid;
		atun._atio.at_tgt = aep->at_tgt;
		atun._atio.at_lun = aep->at_lun;
		atun._atio.at_tag_type = aep->at_tag_type;
		atun._atio.at_tag_val = aep->at_tag_val;
		atun._atio.at_status = (aep->at_flags & AT_TQAE);
		atun._atio.at_status |= CT_OK;
	}
	return (isp_target_put_entry(isp, &atun));
}

/*
 * Command completion- both for handling cases of no resources or
 * no blackhole driver, or other cases where we have to, inline,
 * finish the command sanely, or for normal command completion.
 *
 * The 'completion' code value has the scsi status byte in the low 8 bits.
 * If status is a CHECK CONDITION and bit 8 is nonzero, then bits 12..15 have
 * the sense key and  bits 16..23 have the ASCQ and bits 24..31 have the ASC
 * values.
 *
 * NB: the key, asc, ascq, cannot be used for parallel SCSI as it doesn't
 * NB: inline SCSI sense reporting. As such, we lose this information. XXX.
 *
 * For both parallel && fibre channel, we use the feature that does
 * an automatic resource autoreplenish so we don't have then later do
 * put of an atio to replenish the f/w's resource count.
 */

int
isp_endcmd(struct ispsoftc *isp, void *arg, u_int32_t code, u_int16_t hdl)
{
	int sts;
	union {
		ct_entry_t _ctio;
		ct2_entry_t _ctio2;
	} un;

	MEMZERO(&un, sizeof un);
	sts = code & 0xff;

	if (IS_FC(isp)) {
		at2_entry_t *aep = arg;
		ct2_entry_t *cto = &un._ctio2;

		cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
		cto->ct_header.rqs_entry_count = 1;
		cto->ct_iid = aep->at_iid;
		if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) == 0) {
			cto->ct_lun = aep->at_lun;
		}
		cto->ct_rxid = aep->at_rxid;
		cto->rsp.m1.ct_scsi_status = sts & 0xff;
		cto->ct_flags = CT2_SENDSTATUS | CT2_NO_DATA | CT2_FLAG_MODE1;
		if (hdl == 0) {
			cto->ct_flags |= CT2_CCINCR;
		}
		if (aep->at_datalen) {
			cto->ct_resid = aep->at_datalen;
			cto->rsp.m1.ct_scsi_status |= CT2_DATA_UNDER;
		}
		if ((sts & 0xff) == SCSI_CHECK && (sts & ECMD_SVALID)) {
			cto->rsp.m1.ct_resp[0] = 0xf0;
			cto->rsp.m1.ct_resp[2] = (code >> 12) & 0xf;
			cto->rsp.m1.ct_resp[7] = 8;
			cto->rsp.m1.ct_resp[12] = (code >> 24) & 0xff;
			cto->rsp.m1.ct_resp[13] = (code >> 16) & 0xff;
			cto->rsp.m1.ct_senselen = 16;
			cto->rsp.m1.ct_scsi_status |= CT2_SNSLEN_VALID;
		}
		cto->ct_syshandle = hdl;
	} else {
		at_entry_t *aep = arg;
		ct_entry_t *cto = &un._ctio;

		cto->ct_header.rqs_entry_type = RQSTYPE_CTIO;
		cto->ct_header.rqs_entry_count = 1;
		cto->ct_fwhandle = aep->at_handle;
		cto->ct_iid = aep->at_iid;
		cto->ct_tgt = aep->at_tgt;
		cto->ct_lun = aep->at_lun;
		cto->ct_tag_type = aep->at_tag_type;
		cto->ct_tag_val = aep->at_tag_val;
		if (aep->at_flags & AT_TQAE) {
			cto->ct_flags |= CT_TQAE;
		}
		cto->ct_flags = CT_SENDSTATUS | CT_NO_DATA;
		if (hdl == 0) {
			cto->ct_flags |= CT_CCINCR;
		}
		cto->ct_scsi_status = sts;
		cto->ct_syshandle = hdl;
	}
	return (isp_target_put_entry(isp, &un));
}

void
isp_target_async(struct ispsoftc *isp, int bus, int event)
{
	tmd_event_t evt;
	tmd_msg_t msg;

	switch (event) {
	/*
	 * These three we handle here to propagate an effective bus reset
	 * upstream, but these do not require any immediate notify actions
	 * so we return when done.
	 */
	case ASYNC_LIP_F8:
	case ASYNC_LIP_OCCURRED:
	case ASYNC_LOOP_UP:
	case ASYNC_LOOP_DOWN:
	case ASYNC_LOOP_RESET:
	case ASYNC_PTPMODE:
		/*
		 * These don't require any immediate notify actions. We used
		 * treat them like SCSI Bus Resets, but that was just plain
		 * wrong. Let the normal CTIO completion report what occurred.
		 */
                return;

	case ASYNC_BUS_RESET:
	case ASYNC_TIMEOUT_RESET:
		if (IS_FC(isp)) {
			return;	/* we'll be getting an inotify instead */
		}
		evt.ev_bus = bus;
		evt.ev_event = event;
		(void) isp_async(isp, ISPASYNC_TARGET_EVENT, &evt);
		break;
	case ASYNC_DEVICE_RESET:
		/*
		 * Bus Device Reset resets a specific target, so
		 * we pass this as a synthesized message.
		 */
		MEMZERO(&msg, sizeof msg);
		if (IS_FC(isp)) {
			msg.nt_iid = FCPARAM(isp)->isp_loopid;
		} else {
			msg.nt_iid = SDPARAM(isp)->isp_initiator_id;
		}
		msg.nt_bus = bus;
		msg.nt_msg[0] = MSG_BUS_DEV_RESET;
		(void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg);
		break;
	default:
		isp_prt(isp, ISP_LOGERR,
		    "isp_target_async: unknown event 0x%x", event);
		break;
	}
	if (isp->isp_state == ISP_RUNSTATE)
		isp_notify_ack(isp, NULL);
}


/*
 * Process a received message.
 * The ISP firmware can handle most messages, there are only
 * a few that we need to deal with:
 * - abort: clean up the current command
 * - abort tag and clear queue
 */

static void
isp_got_msg(struct ispsoftc *isp, int bus, in_entry_t *inp)
{
	u_int8_t status = inp->in_status & ~QLTM_SVALID;

	if (status == IN_IDE_RECEIVED || status == IN_MSG_RECEIVED) {
		tmd_msg_t msg;

		MEMZERO(&msg, sizeof (msg));
		msg.nt_bus = bus;
		msg.nt_iid = inp->in_iid;
		msg.nt_tgt = inp->in_tgt;
		msg.nt_lun = inp->in_lun;
		msg.nt_tagtype = inp->in_tag_type;
		msg.nt_tagval = inp->in_tag_val;
		MEMCPY(msg.nt_msg, inp->in_msg, IN_MSGLEN);
		(void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg);
	} else {
		isp_prt(isp, ISP_LOGERR,
		    "unknown immediate notify status 0x%x", inp->in_status);
	}
}

/*
 * Synthesize a message from the task management flags in a FCP_CMND_IU.
 */
static void
isp_got_msg_fc(struct ispsoftc *isp, int bus, in_fcentry_t *inp)
{
	int lun;
	static const char f1[] = "%s from iid %d lun %d seq 0x%x";
	static const char f2[] = 
	    "unknown %s 0x%x lun %d iid %d task flags 0x%x seq 0x%x\n";

	if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
		lun = inp->in_scclun;
	} else {
		lun = inp->in_lun;
	}

	if (inp->in_status != IN_MSG_RECEIVED) {
		isp_prt(isp, ISP_LOGINFO, f2, "immediate notify status",
		    inp->in_status, lun, inp->in_iid,
		    inp->in_task_flags,  inp->in_seqid);
	} else {
		tmd_msg_t msg;

		MEMZERO(&msg, sizeof (msg));
		msg.nt_bus = bus;
		msg.nt_iid = inp->in_iid;
		msg.nt_tagval = inp->in_seqid;
		msg.nt_lun = lun;

		if (inp->in_task_flags & TASK_FLAGS_ABORT_TASK) {
			isp_prt(isp, ISP_LOGINFO, f1, "ABORT TASK",
			    inp->in_iid, msg.nt_lun, inp->in_seqid);
			msg.nt_msg[0] = MSG_ABORT_TAG;
		} else if (inp->in_task_flags & TASK_FLAGS_CLEAR_TASK_SET) {
			isp_prt(isp, ISP_LOGINFO, f1, "CLEAR TASK SET",
			    inp->in_iid, msg.nt_lun, inp->in_seqid);
			msg.nt_msg[0] = MSG_CLEAR_QUEUE;
		} else if (inp->in_task_flags & TASK_FLAGS_TARGET_RESET) {
			isp_prt(isp, ISP_LOGINFO, f1, "TARGET RESET",
			    inp->in_iid, msg.nt_lun, inp->in_seqid);
			msg.nt_msg[0] = MSG_BUS_DEV_RESET;
		} else if (inp->in_task_flags & TASK_FLAGS_CLEAR_ACA) {
			isp_prt(isp, ISP_LOGINFO, f1, "CLEAR ACA",
			    inp->in_iid, msg.nt_lun, inp->in_seqid);
			/* ???? */
			msg.nt_msg[0] = MSG_REL_RECOVERY;
		} else if (inp->in_task_flags & TASK_FLAGS_TERMINATE_TASK) {
			isp_prt(isp, ISP_LOGINFO, f1, "TERMINATE TASK",
			    inp->in_iid, msg.nt_lun, inp->in_seqid);
			msg.nt_msg[0] = MSG_TERM_IO_PROC;
		} else {
			isp_prt(isp, ISP_LOGWARN, f2, "task flag",
			    inp->in_status, msg.nt_lun, inp->in_iid,
			    inp->in_task_flags,  inp->in_seqid);
		}
		if (msg.nt_msg[0]) {
			(void) isp_async(isp, ISPASYNC_TARGET_MESSAGE, &msg);
		}
	}
}

static void
isp_notify_ack(struct ispsoftc *isp, void *arg)
{
	char storage[QENTRY_LEN];
	u_int16_t nxti, optr;
	void *outp;

	if (isp_getrqentry(isp, &nxti, &optr, &outp)) {
		isp_prt(isp, ISP_LOGWARN,
		    "Request Queue Overflow For isp_notify_ack");
		return;
	}

	MEMZERO(storage, QENTRY_LEN);

	if (IS_FC(isp)) {
		na_fcentry_t *na = (na_fcentry_t *) storage;
		if (arg) {
			in_fcentry_t *inp = arg;
			MEMCPY(storage, arg, sizeof (isphdr_t));
			na->na_iid = inp->in_iid;
			if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
				na->na_lun = inp->in_scclun;
			} else {
				na->na_lun = inp->in_lun;
			}
			na->na_task_flags = inp->in_task_flags;
			na->na_seqid = inp->in_seqid;
			na->na_flags = NAFC_RCOUNT;
			na->na_status = inp->in_status;
			if (inp->in_status == IN_RESET) {
				na->na_flags |= NAFC_RST_CLRD;
			}
		} else {
			na->na_flags = NAFC_RST_CLRD;
		}
		na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK;
		na->na_header.rqs_entry_count = 1;
		isp_put_notify_ack_fc(isp, na, (na_fcentry_t *)outp);
	} else {
		na_entry_t *na = (na_entry_t *) storage;
		if (arg) {
			in_entry_t *inp = arg;
			MEMCPY(storage, arg, sizeof (isphdr_t));
			na->na_iid = inp->in_iid;
			na->na_lun = inp->in_lun;
			na->na_tgt = inp->in_tgt;
			na->na_seqid = inp->in_seqid;
			if (inp->in_status == IN_RESET) {
				na->na_event = NA_RST_CLRD;
			}
		} else {
			na->na_event = NA_RST_CLRD;
		}
		na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK;
		na->na_header.rqs_entry_count = 1;
		isp_put_notify_ack(isp, na, (na_entry_t *)outp);
	}
	ISP_TDQE(isp, "isp_notify_ack", (int) optr, storage);
	ISP_ADD_REQUEST(isp, nxti);
}

static void
isp_handle_atio(struct ispsoftc *isp, at_entry_t *aep)
{
	int lun;
	lun = aep->at_lun;
	/*
	 * The firmware status (except for the QLTM_SVALID bit) indicates
	 * why this ATIO was sent to us.
	 *
	 * If QLTM_SVALID is set, the firware has recommended Sense Data.
	 *
	 * If the DISCONNECTS DISABLED bit is set in the flags field,
	 * we're still connected on the SCSI bus - i.e. the initiator
	 * did not set DiscPriv in the identify message. We don't care
	 * about this so it's ignored.
	 */

	switch(aep->at_status & ~QLTM_SVALID) {
	case AT_PATH_INVALID:
		/*
		 * ATIO rejected by the firmware due to disabled lun.
		 */
		isp_prt(isp, ISP_LOGERR,
		    "rejected ATIO for disabled lun %d", lun);
		break;
	case AT_NOCAP:
		/*
		 * Requested Capability not available
		 * We sent an ATIO that overflowed the firmware's
		 * command resource count.
		 */
		isp_prt(isp, ISP_LOGERR,
		    "rejected ATIO for lun %d because of command count"
		    " overflow", lun);
		break;

	case AT_BDR_MSG:
		/*
		 * If we send an ATIO to the firmware to increment
		 * its command resource count, and the firmware is
		 * recovering from a Bus Device Reset, it returns
		 * the ATIO with this status. We set the command
		 * resource count in the Enable Lun entry and do
		 * not increment it. Therefore we should never get
		 * this status here.
		 */
		isp_prt(isp, ISP_LOGERR, atiocope, lun,
		    GET_BUS_VAL(aep->at_iid));
		break;

	case AT_CDB:		/* Got a CDB */
	case AT_PHASE_ERROR:	/* Bus Phase Sequence Error */
		/*
		 * Punt to platform specific layer.
		 */
		(void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep);
		break;

	case AT_RESET:
		/*
		 * A bus reset came along an blew away this command. Why
		 * they do this in addition the async event code stuff,
		 * I dunno.
		 *
		 * Ignore it because the async event will clear things
		 * up for us.
		 */
		isp_prt(isp, ISP_LOGWARN, atior, lun,
		    GET_IID_VAL(aep->at_iid), GET_BUS_VAL(aep->at_iid));
		break;


	default:
		isp_prt(isp, ISP_LOGERR,
		    "Unknown ATIO status 0x%x from initiator %d for lun %d",
		    aep->at_status, aep->at_iid, lun);
		(void) isp_target_put_atio(isp, aep);
		break;
	}
}

static void
isp_handle_atio2(struct ispsoftc *isp, at2_entry_t *aep)
{
	int lun;

	if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
		lun = aep->at_scclun;
	} else {
		lun = aep->at_lun;
	}

	/*
	 * The firmware status (except for the QLTM_SVALID bit) indicates
	 * why this ATIO was sent to us.
	 *
	 * If QLTM_SVALID is set, the firware has recommended Sense Data.
	 *
	 * If the DISCONNECTS DISABLED bit is set in the flags field,
	 * we're still connected on the SCSI bus - i.e. the initiator
	 * did not set DiscPriv in the identify message. We don't care
	 * about this so it's ignored.
	 */

	switch(aep->at_status & ~QLTM_SVALID) {
	case AT_PATH_INVALID:
		/*
		 * ATIO rejected by the firmware due to disabled lun.
		 */
		isp_prt(isp, ISP_LOGERR,
		    "rejected ATIO2 for disabled lun %d", lun);
		break;
	case AT_NOCAP:
		/*
		 * Requested Capability not available
		 * We sent an ATIO that overflowed the firmware's
		 * command resource count.
		 */
		isp_prt(isp, ISP_LOGERR,
		    "rejected ATIO2 for lun %d- command count overflow", lun);
		break;

	case AT_BDR_MSG:
		/*
		 * If we send an ATIO to the firmware to increment
		 * its command resource count, and the firmware is
		 * recovering from a Bus Device Reset, it returns
		 * the ATIO with this status. We set the command
		 * resource count in the Enable Lun entry and no
		 * not increment it. Therefore we should never get
		 * this status here.
		 */
		isp_prt(isp, ISP_LOGERR, atiocope, lun, 0);
		break;

	case AT_CDB:		/* Got a CDB */
		/*
		 * Punt to platform specific layer.
		 */
		(void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep);
		break;

	case AT_RESET:
		/*
		 * A bus reset came along an blew away this command. Why
		 * they do this in addition the async event code stuff,
		 * I dunno.
		 *
		 * Ignore it because the async event will clear things
		 * up for us.
		 */
		isp_prt(isp, ISP_LOGERR, atior, lun, aep->at_iid, 0);
		break;


	default:
		isp_prt(isp, ISP_LOGERR,
		    "Unknown ATIO2 status 0x%x from initiator %d for lun %d",
		    aep->at_status, aep->at_iid, lun);
		(void) isp_target_put_atio(isp, aep);
		break;
	}
}

static void
isp_handle_ctio(struct ispsoftc *isp, ct_entry_t *ct)
{
	void *xs;
	int pl = ISP_LOGTDEBUG2;
	char *fmsg = NULL;

	if (ct->ct_syshandle) {
		xs = isp_find_xs(isp, ct->ct_syshandle);
		if (xs == NULL)
			pl = ISP_LOGALL;
	} else {
		xs = NULL;
	}

	switch(ct->ct_status & ~QLTM_SVALID) {
	case CT_OK:
		/*
		 * There are generally 3 possibilities as to why we'd get
		 * this condition:
		 * 	We disconnected after receiving a CDB.
		 * 	We sent or received data.
		 * 	We sent status & command complete.
		 */

		if (ct->ct_flags & CT_SENDSTATUS) {
			break;
		} else if ((ct->ct_flags & CT_DATAMASK) == CT_NO_DATA) {
			/*
			 * Nothing to do in this case.
			 */
			isp_prt(isp, pl, "CTIO- iid %d disconnected OK",
			    ct->ct_iid);
			return;
		}
		break;

	case CT_BDR_MSG:
		/*
		 * Bus Device Reset message received or the SCSI Bus has
		 * been Reset; the firmware has gone to Bus Free.
		 *
		 * The firmware generates an async mailbox interupt to
		 * notify us of this and returns outstanding CTIOs with this
		 * status. These CTIOs are handled in that same way as
		 * CT_ABORTED ones, so just fall through here.
		 */
		fmsg = "Bus Device Reset";
		/*FALLTHROUGH*/
	case CT_RESET:
		if (fmsg == NULL)
			fmsg = "Bus Reset";
		/*FALLTHROUGH*/
	case CT_ABORTED:
		/*
		 * When an Abort message is received the firmware goes to
		 * Bus Free and returns all outstanding CTIOs with the status
		 * set, then sends us an Immediate Notify entry.
		 */
		if (fmsg == NULL)
			fmsg = "ABORT TAG message sent by Initiator";

		isp_prt(isp, ISP_LOGWARN, "CTIO destroyed by %s", fmsg);
		break;

	case CT_INVAL:
		/*
		 * CTIO rejected by the firmware due to disabled lun.
		 * "Cannot Happen".
		 */
		isp_prt(isp, ISP_LOGERR,
		    "Firmware rejected CTIO for disabled lun %d",
		    ct->ct_lun);
		break;

	case CT_NOPATH:
		/*
		 * CTIO rejected by the firmware due "no path for the
		 * nondisconnecting nexus specified". This means that
		 * we tried to access the bus while a non-disconnecting
		 * command is in process.
		 */
		isp_prt(isp, ISP_LOGERR,
		    "Firmware rejected CTIO for bad nexus %d/%d/%d",
		    ct->ct_iid, ct->ct_tgt, ct->ct_lun);
		break;

	case CT_RSELTMO:
		fmsg = "Reselection";
		/*FALLTHROUGH*/
	case CT_TIMEOUT:
		if (fmsg == NULL)
			fmsg = "Command";
		isp_prt(isp, ISP_LOGERR, "Firmware timed out on %s", fmsg);
		break;

	case	CT_PANIC:
		if (fmsg == NULL)
			fmsg = "Unrecoverable Error";
		/*FALLTHROUGH*/
	case CT_ERR:
		if (fmsg == NULL)
			fmsg = "Completed with Error";
		/*FALLTHROUGH*/
	case CT_PHASE_ERROR:
		if (fmsg == NULL)
			fmsg = "Phase Sequence Error";
		/*FALLTHROUGH*/
	case CT_TERMINATED:
		if (fmsg == NULL)
			fmsg = "terminated by TERMINATE TRANSFER";
		/*FALLTHROUGH*/
	case CT_NOACK:
		if (fmsg == NULL)
			fmsg = "unacknowledged Immediate Notify pending";
		isp_prt(isp, ISP_LOGERR, "CTIO returned by f/w- %s", fmsg);
		break;
	default:
		isp_prt(isp, ISP_LOGERR, "Unknown CTIO status 0x%x",
		    ct->ct_status & ~QLTM_SVALID);
		break;
	}

	if (xs == NULL) {
		/*
		 * There may be more than one CTIO for a data transfer,
		 * or this may be a status CTIO we're not monitoring.
		 *
		 * The assumption is that they'll all be returned in the
		 * order we got them.
		 */
		if (ct->ct_syshandle == 0) {
			if ((ct->ct_flags & CT_SENDSTATUS) == 0) {
				isp_prt(isp, pl,
				    "intermediate CTIO completed ok");
			} else {
				isp_prt(isp, pl,
				    "unmonitored CTIO completed ok");
			}
		} else {
			isp_prt(isp, pl,
			    "NO xs for CTIO (handle 0x%x) status 0x%x",
			    ct->ct_syshandle, ct->ct_status & ~QLTM_SVALID);
		}
	} else {
		/*
		 * Final CTIO completed. Release DMA resources and
		 * notify platform dependent layers.
		 */
		if ((ct->ct_flags & CT_DATAMASK) != CT_NO_DATA) {
			ISP_DMAFREE(isp, xs, ct->ct_syshandle);
		}
		isp_prt(isp, pl, "final CTIO complete");
		/*
		 * The platform layer will destroy the handle if appropriate.
		 */
		(void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct);
	}
}

static void
isp_handle_ctio2(struct ispsoftc *isp, ct2_entry_t *ct)
{
	XS_T *xs;
	int pl = ISP_LOGTDEBUG2;
	char *fmsg = NULL;

	if (ct->ct_syshandle) {
		xs = isp_find_xs(isp, ct->ct_syshandle);
		if (xs == NULL)
			pl = ISP_LOGALL;
	} else {
		xs = NULL;
	}

	switch(ct->ct_status & ~QLTM_SVALID) {
	case CT_BUS_ERROR:
		isp_prt(isp, ISP_LOGERR, "PCI DMA Bus Error");
		/* FALL Through */
	case CT_DATA_OVER:
	case CT_DATA_UNDER:
	case CT_OK:
		/*
		 * There are generally 2 possibilities as to why we'd get
		 * this condition:
		 * 	We sent or received data.
		 * 	We sent status & command complete.
		 */

		break;

	case CT_BDR_MSG:
		/*
		 * Target Reset function received.
		 *
		 * The firmware generates an async mailbox interupt to
		 * notify us of this and returns outstanding CTIOs with this
		 * status. These CTIOs are handled in that same way as
		 * CT_ABORTED ones, so just fall through here.
		 */
		fmsg = "TARGET RESET Task Management Function Received";
		/*FALLTHROUGH*/
	case CT_RESET:
		if (fmsg == NULL)
			fmsg = "LIP Reset";
		/*FALLTHROUGH*/
	case CT_ABORTED:
		/*
		 * When an Abort message is received the firmware goes to
		 * Bus Free and returns all outstanding CTIOs with the status
		 * set, then sends us an Immediate Notify entry.
		 */
		if (fmsg == NULL)
			fmsg = "ABORT Task Management Function Received";

		isp_prt(isp, ISP_LOGERR, "CTIO2 destroyed by %s", fmsg);
		break;

	case CT_INVAL:
		/*
		 * CTIO rejected by the firmware - invalid data direction.
		 */
		isp_prt(isp, ISP_LOGERR, "CTIO2 had wrong data directiond");
		break;

	case CT_RSELTMO:
		fmsg = "failure to reconnect to initiator";
		/*FALLTHROUGH*/
	case CT_TIMEOUT:
		if (fmsg == NULL)
			fmsg = "command";
		isp_prt(isp, ISP_LOGERR, "Firmware timed out on %s", fmsg);
		break;

	case CT_ERR:
		fmsg = "Completed with Error";
		/*FALLTHROUGH*/
	case CT_LOGOUT:
		if (fmsg == NULL)
			fmsg = "Port Logout";
		/*FALLTHROUGH*/
	case CT_PORTNOTAVAIL:
		if (fmsg == NULL)
			fmsg = "Port not available";
	case CT_PORTCHANGED:
		if (fmsg == NULL)
			fmsg = "Port Changed";
	case CT_NOACK:
		if (fmsg == NULL)
			fmsg = "unacknowledged Immediate Notify pending";
		isp_prt(isp, ISP_LOGERR, "CTIO returned by f/w- %s", fmsg);
		break;

	case CT_INVRXID:
		/*
		 * CTIO rejected by the firmware because an invalid RX_ID.
		 * Just print a message.
		 */
		isp_prt(isp, ISP_LOGERR,
		    "CTIO2 completed with Invalid RX_ID 0x%x", ct->ct_rxid);
		break;

	default:
		isp_prt(isp, ISP_LOGERR, "Unknown CTIO2 status 0x%x",
		    ct->ct_status & ~QLTM_SVALID);
		break;
	}

	if (xs == NULL) {
		/*
		 * There may be more than one CTIO for a data transfer,
		 * or this may be a status CTIO we're not monitoring.
		 *
		 * The assumption is that they'll all be returned in the
		 * order we got them.
		 */
		if (ct->ct_syshandle == 0) {
			if ((ct->ct_flags & CT_SENDSTATUS) == 0) {
				isp_prt(isp, pl,
				    "intermediate CTIO completed ok");
			} else {
				isp_prt(isp, pl,
				    "unmonitored CTIO completed ok");
			}
		} else {
			isp_prt(isp, pl,
			    "NO xs for CTIO (handle 0x%x) status 0x%x",
			    ct->ct_syshandle, ct->ct_status & ~QLTM_SVALID);
		}
	} else {
		if ((ct->ct_flags & CT2_DATAMASK) != CT2_NO_DATA) {
			ISP_DMAFREE(isp, xs, ct->ct_syshandle);
		}
		if (ct->ct_flags & CT_SENDSTATUS) {
			/*
			 * Sent status and command complete.
			 *
			 * We're now really done with this command, so we
			 * punt to the platform dependent layers because
			 * only there can we do the appropriate command
			 * complete thread synchronization.
			 */
			isp_prt(isp, pl, "status CTIO complete");
		} else {
			/*
			 * Final CTIO completed. Release DMA resources and
			 * notify platform dependent layers.
			 */
			isp_prt(isp, pl, "data CTIO complete");
		}
		(void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct);
		/*
		 * The platform layer will destroy the handle if appropriate.
		 */
	}
}
#endif
OpenPOWER on IntegriCloud