path: root/sys/contrib/octeon-sdk/cvmx-pko.h

/***********************license start***************
 * Copyright (c) 2003-2010  Cavium Inc. (support@cavium.com). All rights
 * reserved.
 *
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials provided
 *     with the distribution.

 *   * Neither the name of Cavium Inc. nor the names of
 *     its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written
 *     permission.

 * This Software, including technical data, may be subject to U.S. export  control
 * laws, including the U.S. Export Administration Act and its  associated
 * regulations, and may be subject to export or import  regulations in other
 * countries.

 * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
 * AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
 * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
 * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
 * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
 * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
 * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
 * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
 * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
 * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
 ***********************license end**************************************/


/**
 * @file
 *
 * Interface to the hardware Packet Output unit.
 *
 * Starting with SDK 1.7.0, the PKO output functions now support
 * two types of locking. CVMX_PKO_LOCK_ATOMIC_TAG continues to
 * function similarly to previous SDKs by using POW atomic tags
 * to preserve ordering and exclusivity. As a new option, you
 * can now pass CVMX_PKO_LOCK_CMD_QUEUE which uses a ll/sc
 * memory based locking instead. This locking has the advantage
 * of not affecting the tag state but doesn't preserve packet
 * ordering. CVMX_PKO_LOCK_CMD_QUEUE is appropriate in most
 * generic code while CVMX_PKO_LOCK_CMD_QUEUE should be used
 * with hand tuned fast path code.
 *
 * Some of other SDK differences visible to the command command
 * queuing:
 * - PKO indexes are no longer stored in the FAU. A large
 *   percentage of the FAU register block used to be tied up
 *   maintaining PKO queue pointers. These are now stored in a
 *   global named block.
 * - The PKO <b>use_locking</b> parameter can now have a global
 *   effect. Since all application use the same named block,
 *   queue locking correctly applies across all operating
 *   systems when using CVMX_PKO_LOCK_CMD_QUEUE.
 * - PKO 3 word commands are now supported. Use
 *   cvmx_pko_send_packet_finish3().
 *
 * <hr>$Revision: 70030 $<hr>
 */


#ifndef __CVMX_PKO_H__
#define __CVMX_PKO_H__

#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
#include "cvmx-config.h"
#include "cvmx-pko-defs.h"
#include <asm/octeon/cvmx-fau.h>
#include <asm/octeon/cvmx-fpa.h>
#include <asm/octeon/cvmx-pow.h>
#include <asm/octeon/cvmx-cmd-queue.h>
#include <asm/octeon/cvmx-helper.h>
#include <asm/octeon/cvmx-helper-cfg.h>
#else
# ifndef CVMX_DONT_INCLUDE_CONFIG
#  include "executive-config.h"
#  ifdef CVMX_ENABLE_PKO_FUNCTIONS
#   include "cvmx-config.h"
#  endif
# endif
#include "cvmx-fau.h"
#include "cvmx-fpa.h"
#include "cvmx-pow.h"
#include "cvmx-cmd-queue.h"
#include "cvmx-helper.h"
#include "cvmx-helper-util.h"
#include "cvmx-helper-cfg.h"
#endif

/* Adjust the command buffer size by 1 word so that in the case of using only
** two word PKO commands no command words stradle buffers.  The useful values
** for this are 0 and 1. */
#define CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST (1)

#ifdef	__cplusplus
extern "C" {
#endif

#define CVMX_PKO_MAX_OUTPUT_QUEUES_STATIC 256
#define CVMX_PKO_MAX_OUTPUT_QUEUES      ((OCTEON_IS_MODEL(OCTEON_CN31XX) || \
					  OCTEON_IS_MODEL(OCTEON_CN3010) || \
					  OCTEON_IS_MODEL(OCTEON_CN3005) || \
					  OCTEON_IS_MODEL(OCTEON_CN50XX)) ? \
					  32 :				    \
					 (OCTEON_IS_MODEL(OCTEON_CN58XX) || \
					  OCTEON_IS_MODEL(OCTEON_CN56XX) || \
					  OCTEON_IS_MODEL(OCTEON_CN52XX) || \
					  OCTEON_IS_MODEL(OCTEON_CN6XXX) || \
					  OCTEON_IS_MODEL(OCTEON_CNF7XXX)) ? \
					  256 : 128)
#define CVMX_PKO_NUM_OUTPUT_PORTS       ((OCTEON_IS_MODEL(OCTEON_CN63XX)) ? 44 : (OCTEON_IS_MODEL(OCTEON_CN66XX) ? 46 : 40))
#define CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID 63 /* use this for queues that are not used */
#define CVMX_PKO_QUEUE_STATIC_PRIORITY  9
#define CVMX_PKO_ILLEGAL_QUEUE  0xFFFF
#define CVMX_PKO_MAX_QUEUE_DEPTH 0

typedef enum
{
    CVMX_PKO_SUCCESS,
    CVMX_PKO_INVALID_PORT,
    CVMX_PKO_INVALID_QUEUE,
    CVMX_PKO_INVALID_PRIORITY,
    CVMX_PKO_NO_MEMORY,
    CVMX_PKO_PORT_ALREADY_SETUP,
    CVMX_PKO_CMD_QUEUE_INIT_ERROR
} cvmx_pko_status_t;

/**
 * This enumeration represents the differnet locking modes supported by PKO.
 */
typedef enum
{
    CVMX_PKO_LOCK_NONE = 0,         /**< PKO doesn't do any locking. It is the responsibility
                                        of the application to make sure that no other core is
                                        accessing the same queue at the same time */
    CVMX_PKO_LOCK_ATOMIC_TAG = 1,   /**< PKO performs an atomic tagswitch to insure exclusive
                                        access to the output queue. This will maintain
                                        packet ordering on output */
    CVMX_PKO_LOCK_CMD_QUEUE = 2,    /**< PKO uses the common command queue locks to insure
                                        exclusive access to the output queue. This is a memory
                                        based ll/sc. This is the most portable locking
                                        mechanism */
} cvmx_pko_lock_t;

typedef struct
{
    uint32_t packets;
    uint64_t octets;
    uint64_t doorbell;
} cvmx_pko_port_status_t;

/**
 * This structure defines the address to use on a packet enqueue
 */
typedef union
{
    uint64_t                u64;
    struct
    {
        cvmx_mips_space_t   mem_space   : 2;    /**< Must CVMX_IO_SEG */
        uint64_t            reserved    :13;    /**< Must be zero */
        uint64_t            is_io       : 1;    /**< Must be one */
        uint64_t            did         : 8;    /**< The ID of the device on the non-coherent bus */
        uint64_t            reserved2   : 4;    /**< Must be zero */
        uint64_t            reserved3   :15;    /**< Must be zero */
        uint64_t            port        : 9;    /**< The hardware must have the output port in addition to the output queue */
        uint64_t            queue       : 9;    /**< The output queue to send the packet to (0-127 are legal) */
        uint64_t            reserved4   : 3;    /**< Must be zero */
   } s;
} cvmx_pko_doorbell_address_t;

/**
 * Structure of the first packet output command word.
 */
typedef union
{
    uint64_t                u64;
    struct
    {
        cvmx_fau_op_size_t  size1       : 2; /**< The size of the reg1 operation - could be 8, 16, 32, or 64 bits */
        cvmx_fau_op_size_t  size0       : 2; /**< The size of the reg0 operation - could be 8, 16, 32, or 64 bits */
        uint64_t            subone1     : 1; /**< If set, subtract 1, if clear, subtract packet size */
        uint64_t            reg1        :11; /**< The register, subtract will be done if reg1 is non-zero */
        uint64_t            subone0     : 1; /**< If set, subtract 1, if clear, subtract packet size */
        uint64_t            reg0        :11; /**< The register, subtract will be done if reg0 is non-zero */
        uint64_t            le          : 1; /**< When set, interpret segment pointer and segment bytes in little endian order */
        uint64_t            n2          : 1; /**< When set, packet data not allocated in L2 cache by PKO */
        uint64_t            wqp         : 1; /**< If set and rsp is set, word3 contains a pointer to a work queue entry */
        uint64_t            rsp         : 1; /**< If set, the hardware will send a response when done */
        uint64_t            gather      : 1; /**< If set, the supplied pkt_ptr is really a pointer to a list of pkt_ptr's */
        uint64_t            ipoffp1     : 7; /**< If ipoffp1 is non zero, (ipoffp1-1) is the number of bytes to IP header,
                                                and the hardware will calculate and insert the  UDP/TCP checksum */
        uint64_t            ignore_i    : 1; /**< If set, ignore the I bit (force to zero) from all pointer structures */
        uint64_t            dontfree    : 1; /**< If clear, the hardware will attempt to free the buffers containing the packet */
        uint64_t            segs        : 6; /**< The total number of segs in the packet, if gather set, also gather list length */
        uint64_t            total_bytes :16; /**< Including L2, but no trailing CRC */
    } s;
} cvmx_pko_command_word0_t;

/* CSR typedefs have been moved to cvmx-pko-defs.h */

/**
 * Definition of internal state for Packet output processing
 */
typedef struct
{
    uint64_t *      start_ptr;          /**< ptr to start of buffer, offset kept in FAU reg */
} cvmx_pko_state_elem_t;


#ifdef CVMX_ENABLE_PKO_FUNCTIONS
/**
 * Call before any other calls to initialize the packet
 * output system.
 */
extern void cvmx_pko_initialize_global(void);
extern int cvmx_pko_initialize_local(void);

#endif


/**
 * Enables the packet output hardware. It must already be
 * configured.
 */
extern void cvmx_pko_enable(void);


/**
 * Disables the packet output. Does not affect any configuration.
 */
extern void cvmx_pko_disable(void);


/**
 * Shutdown and free resources required by packet output.
 */

#ifdef CVMX_ENABLE_PKO_FUNCTIONS
extern void cvmx_pko_shutdown(void);

/**
 * Configure a output port and the associated queues for use.
 *
 * @param port       Port to configure.
 * @param base_queue First queue number to associate with this port.
 * @param num_queues Number of queues t oassociate with this port
 * @param priority   Array of priority levels for each queue. Values are
 *                   allowed to be 1-8. A value of 8 get 8 times the traffic
 *                   of a value of 1. There must be num_queues elements in the
 *                   array.
 */
extern cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue, uint64_t num_queues, const uint64_t priority[]);


/**
 * Ring the packet output doorbell. This tells the packet
 * output hardware that "len" command words have been added
 * to its pending list.  This command includes the required
 * CVMX_SYNCWS before the doorbell ring.
 *
 * WARNING: This function may have to look up the proper PKO port in
 * the IPD port to PKO port map, and is thus slower than calling
 * cvmx_pko_doorbell_pkoid() directly if the PKO port identifier is
 * known.
 *
 * @param ipd_port   The IPD port corresponding the to pko port the packet is for
 * @param queue  Queue the packet is for
 * @param len    Length of the command in 64 bit words
 */
static inline void cvmx_pko_doorbell(uint64_t ipd_port, uint64_t queue, uint64_t len)
{
   cvmx_pko_doorbell_address_t ptr;
   uint64_t pko_port;

   pko_port = ipd_port;
   if (octeon_has_feature(OCTEON_FEATURE_PKND))
	pko_port = cvmx_helper_cfg_ipd2pko_port_base(ipd_port);

   ptr.u64          = 0;
   ptr.s.mem_space  = CVMX_IO_SEG;
   ptr.s.did        = CVMX_OCT_DID_PKT_SEND;
   ptr.s.is_io      = 1;
   ptr.s.port       = pko_port;
   ptr.s.queue      = queue;
   CVMX_SYNCWS;  /* Need to make sure output queue data is in DRAM before doorbell write */
   cvmx_write_io(ptr.u64, len);
}
#endif


/**
 * Prepare to send a packet.  This may initiate a tag switch to
 * get exclusive access to the output queue structure, and
 * performs other prep work for the packet send operation.
 *
 * cvmx_pko_send_packet_finish() MUST be called after this function is called,
 * and must be called with the same port/queue/use_locking arguments.
 *
 * The use_locking parameter allows the caller to use three
 * possible locking modes.
 * - CVMX_PKO_LOCK_NONE
 *      - PKO doesn't do any locking. It is the responsibility
 *          of the application to make sure that no other core
 *          is accessing the same queue at the same time.
 * - CVMX_PKO_LOCK_ATOMIC_TAG
 *      - PKO performs an atomic tagswitch to insure exclusive
 *          access to the output queue. This will maintain
 *          packet ordering on output.
 * - CVMX_PKO_LOCK_CMD_QUEUE
 *      - PKO uses the common command queue locks to insure
 *          exclusive access to the output queue. This is a
 *          memory based ll/sc. This is the most portable
 *          locking mechanism.
 *
 * NOTE: If atomic locking is used, the POW entry CANNOT be
 * descheduled, as it does not contain a valid WQE pointer.
 *
 * @param port   Port to send it on, this can be either IPD port or PKO
 * 		 port.
 * @param queue  Queue to use
 * @param use_locking
 *               CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE
 */
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
static inline void cvmx_pko_send_packet_prepare(uint64_t port, uint64_t queue, cvmx_pko_lock_t use_locking)
{
    if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
    {
        /* Must do a full switch here to handle all cases.  We use a fake WQE pointer, as the POW does
        ** not access this memory.  The WQE pointer and group are only used if this work is descheduled,
        ** which is not supported by the cvmx_pko_send_packet_prepare/cvmx_pko_send_packet_finish combination.
        ** Note that this is a special case in which these fake values can be used - this is not a general technique.
        */
        uint32_t tag = CVMX_TAG_SW_BITS_INTERNAL << CVMX_TAG_SW_SHIFT | CVMX_TAG_SUBGROUP_PKO  << CVMX_TAG_SUBGROUP_SHIFT | (CVMX_TAG_SUBGROUP_MASK & queue);
        cvmx_pow_tag_sw_full((cvmx_wqe_t *)cvmx_phys_to_ptr(0x80), tag, CVMX_POW_TAG_TYPE_ATOMIC, 0);
    }
}

#define cvmx_pko_send_packet_prepare_pkoid	cvmx_pko_send_packet_prepare

/**
 * Complete packet output. cvmx_pko_send_packet_prepare() must be called exactly once before this,
 * and the same parameters must be passed to both cvmx_pko_send_packet_prepare() and
 * cvmx_pko_send_packet_finish().
 *
 * WARNING: This function may have to look up the proper PKO port in
 * the IPD port to PKO port map, and is thus slower than calling
 * cvmx_pko_send_packet_finish_pkoid() directly if the PKO port
 * identifier is known.
 *
 * @param ipd_port   The IPD port corresponding the to pko port the packet is for
 * @param queue  Queue to use
 * @param pko_command
 *               PKO HW command word
 * @param packet Packet to send
 * @param use_locking
 *               CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE
 *
 * @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output
 */
static inline cvmx_pko_status_t cvmx_pko_send_packet_finish(uint64_t ipd_port, uint64_t queue,
                                        cvmx_pko_command_word0_t pko_command,
                                        cvmx_buf_ptr_t packet, cvmx_pko_lock_t use_locking)
{
    cvmx_cmd_queue_result_t result;
    if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
        cvmx_pow_tag_sw_wait();
    result = cvmx_cmd_queue_write2(CVMX_CMD_QUEUE_PKO(queue),
                                   (use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
                                   pko_command.u64,
                                   packet.u64);
    if (cvmx_likely(result == CVMX_CMD_QUEUE_SUCCESS))
    {
        cvmx_pko_doorbell(ipd_port, queue, 2);
        return CVMX_PKO_SUCCESS;
    }
    else if ((result == CVMX_CMD_QUEUE_NO_MEMORY) || (result == CVMX_CMD_QUEUE_FULL))
    {
        return CVMX_PKO_NO_MEMORY;
    }
    else
    {
        return CVMX_PKO_INVALID_QUEUE;
    }
}


/**
 * Complete packet output. cvmx_pko_send_packet_prepare() must be called exactly once before this,
 * and the same parameters must be passed to both cvmx_pko_send_packet_prepare() and
 * cvmx_pko_send_packet_finish().
 *
 * WARNING: This function may have to look up the proper PKO port in
 * the IPD port to PKO port map, and is thus slower than calling
 * cvmx_pko_send_packet_finish3_pkoid() directly if the PKO port
 * identifier is known.
 *
 * @param ipd_port   The IPD port corresponding the to pko port the packet is for
 * @param queue  Queue to use
 * @param pko_command
 *               PKO HW command word
 * @param packet Packet to send
 * @param addr   Plysical address of a work queue entry or physical address to zero on complete.
 * @param use_locking
 *               CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE
 *
 * @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output
 */
static inline cvmx_pko_status_t cvmx_pko_send_packet_finish3(uint64_t ipd_port, uint64_t queue,
                                        cvmx_pko_command_word0_t pko_command,
                                        cvmx_buf_ptr_t packet, uint64_t addr, cvmx_pko_lock_t use_locking)
{
    cvmx_cmd_queue_result_t result;
    if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
        cvmx_pow_tag_sw_wait();
    result = cvmx_cmd_queue_write3(CVMX_CMD_QUEUE_PKO(queue),
                                   (use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
                                   pko_command.u64,
                                   packet.u64,
                                   addr);
    if (cvmx_likely(result == CVMX_CMD_QUEUE_SUCCESS))
    {
        cvmx_pko_doorbell(ipd_port, queue, 3);
        return CVMX_PKO_SUCCESS;
    }
    else if ((result == CVMX_CMD_QUEUE_NO_MEMORY) || (result == CVMX_CMD_QUEUE_FULL))
    {
        return CVMX_PKO_NO_MEMORY;
    }
    else
    {
        return CVMX_PKO_INVALID_QUEUE;
    }
}

/**
 * Get the first pko_port for the (interface, index)
 *
 * @param interface
 * @param index
 */
extern int cvmx_pko_get_base_pko_port(int interface, int index);

/**
 * Get the number of pko_ports for the (interface, index)
 *
 * @param interface
 * @param index
 */
extern int cvmx_pko_get_num_pko_ports(int interface, int index);

/**
 * Return the pko output queue associated with a port and a specific core.
 * In normal mode (PKO lockless operation is disabled), the value returned
 * is the base queue.
 *
 * @param port   Port number
 * @param core   Core to get queue for
 *
 * @return Core-specific output queue and -1 on error.
 *
 * Note: This function is invalid for o68.
 */
static inline int cvmx_pko_get_base_queue_per_core(int port, int core)
{
    if (OCTEON_IS_MODEL(OCTEON_CN68XX))
    {
	cvmx_dprintf("cvmx_pko_get_base_queue_per_core() not"
	    "supported starting from o68!\n");
        return -1;
    }

#ifndef CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0
    #define CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0 16
#endif
#ifndef CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1
    #define CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1 16
#endif
#ifndef CVMX_PKO_QUEUES_PER_PORT_SRIO0
    /* We use two queues per port for SRIO0. Having two queues per
        port with two ports gives us four queues, one for each mailbox */
    #define CVMX_PKO_QUEUES_PER_PORT_SRIO0 2
#endif
#ifndef CVMX_PKO_QUEUES_PER_PORT_SRIO1
    /* We use two queues per port for SRIO1. Having two queues per
        port with two ports gives us four queues, one for each mailbox */
    #define CVMX_PKO_QUEUES_PER_PORT_SRIO1 2
#endif
#ifndef CVMX_PKO_QUEUES_PER_PORT_SRIO2
    /* We use two queues per port for SRIO2. Having two queues per
        port with two ports gives us four queues, one for each mailbox */
    #define CVMX_PKO_QUEUES_PER_PORT_SRIO2 2
#endif
    if (port < CVMX_PKO_MAX_PORTS_INTERFACE0)
        return port * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 + core;
    else if (port >=16 && port < 16 + CVMX_PKO_MAX_PORTS_INTERFACE1)
        return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
	       (port-16) * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 + core;
    else if ((port >= 32) && (port < 36))
        return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
               CVMX_PKO_MAX_PORTS_INTERFACE1 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
               (port-32) * CVMX_PKO_QUEUES_PER_PORT_PCI;
    else if ((port >= 36) && (port < 40))
        return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
               CVMX_PKO_MAX_PORTS_INTERFACE1 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
               4 * CVMX_PKO_QUEUES_PER_PORT_PCI +
               (port-36) * CVMX_PKO_QUEUES_PER_PORT_LOOP;
    else if ((port >= 40) && (port < 42))
        return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
               CVMX_PKO_MAX_PORTS_INTERFACE1 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
               4 * CVMX_PKO_QUEUES_PER_PORT_PCI +
               4 * CVMX_PKO_QUEUES_PER_PORT_LOOP +
	       (port-40) * CVMX_PKO_QUEUES_PER_PORT_SRIO0;
    else if ((port >= 42) && (port < 44))
        return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
               CVMX_PKO_MAX_PORTS_INTERFACE1 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
               4 * CVMX_PKO_QUEUES_PER_PORT_PCI +
               4 * CVMX_PKO_QUEUES_PER_PORT_LOOP +
	       2 * CVMX_PKO_QUEUES_PER_PORT_SRIO0 +
	       (port-42) * CVMX_PKO_QUEUES_PER_PORT_SRIO1;
    else if ((port >= 44) && (port < 46))
        return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
               CVMX_PKO_MAX_PORTS_INTERFACE1 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
               4 * CVMX_PKO_QUEUES_PER_PORT_PCI +
               4 * CVMX_PKO_QUEUES_PER_PORT_LOOP +
	       4 * CVMX_PKO_QUEUES_PER_PORT_SRIO0 +
	       (port-44) * CVMX_PKO_QUEUES_PER_PORT_SRIO2;
    else
        /* Given the limit on the number of ports we can map to
         * CVMX_MAX_OUTPUT_QUEUES_STATIC queues (currently 256,
         * divided among all cores), the remaining unmapped ports
         * are assigned an illegal queue number */
        return CVMX_PKO_ILLEGAL_QUEUE;
}

/**
 * For a given port number, return the base pko output queue
 * for the port.
 *
 * @param port   IPD port number
 * @return Base output queue
 */
extern int cvmx_pko_get_base_queue(int port);

/**
 * For a given port number, return the number of pko output queues.
 *
 * @param port   IPD port number
 * @return Number of output queues
 */
extern int cvmx_pko_get_num_queues(int port);

#ifdef CVMX_ENABLE_PKO_FUNCTIONS

/**
 * Get the status counters for a port.
 *
 * @param ipd_port Port number (ipd_port) to get statistics for.
 * @param clear    Set to 1 to clear the counters after they are read
 * @param status   Where to put the results.
 *
 * Note:
 *     - Only the doorbell for the base queue of the ipd_port is
 *       collected.
 *     - Retrieving the stats involves writing the index through
 *       CVMX_PKO_REG_READ_IDX and reading the stat CSRs, in that
 *       order. It is not MP-safe and caller should guarantee
 *       atomicity.
 */
static inline void cvmx_pko_get_port_status(uint64_t ipd_port, uint64_t clear,
    cvmx_pko_port_status_t *status)
{
    cvmx_pko_reg_read_idx_t pko_reg_read_idx;
    cvmx_pko_mem_count0_t pko_mem_count0;
    cvmx_pko_mem_count1_t pko_mem_count1;
    int pko_port, port_base, port_limit;

    if (octeon_has_feature(OCTEON_FEATURE_PKND)) {
        int interface = cvmx_helper_get_interface_num(ipd_port);
        int index = cvmx_helper_get_interface_index_num(ipd_port);
        port_base = cvmx_helper_get_pko_port(interface, index);
        if (port_base == -1)
            cvmx_dprintf("Warning: Invalid port_base\n");
	port_limit = port_base + cvmx_pko_get_num_pko_ports(interface, index);
    } else {
        port_base = ipd_port;
	port_limit = port_base + 1;
    }

    /*
     * status->packets and status->octets
     */
    status->packets = 0;
    status->octets = 0;
    pko_reg_read_idx.u64 = 0;

    for (pko_port = port_base; pko_port < port_limit; pko_port++)
    {

	/*
	 * In theory, one doesn't need to write the index csr every
	 * time as he can set pko_reg_read_idx.s.inc to increment
	 * the index automatically. Need to find out exactly how XXX.
	 */
        pko_reg_read_idx.s.index = pko_port;
        cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);

        pko_mem_count0.u64 = cvmx_read_csr(CVMX_PKO_MEM_COUNT0);
        status->packets += pko_mem_count0.s.count;
        if (clear)
        {
            pko_mem_count0.s.count = pko_port;
            cvmx_write_csr(CVMX_PKO_MEM_COUNT0, pko_mem_count0.u64);
        }

        pko_mem_count1.u64 = cvmx_read_csr(CVMX_PKO_MEM_COUNT1);
        status->octets += pko_mem_count1.s.count;
        if (clear)
        {
            pko_mem_count1.s.count = pko_port;
            cvmx_write_csr(CVMX_PKO_MEM_COUNT1, pko_mem_count1.u64);
        }
    }

    /*
     * status->doorbell
     */
    if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
    {
        cvmx_pko_mem_debug9_t debug9;
        pko_reg_read_idx.s.index = cvmx_pko_get_base_queue(ipd_port);
        cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);
        debug9.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG9);
        status->doorbell = debug9.cn38xx.doorbell;
    }
    else
    {
        cvmx_pko_mem_debug8_t debug8;
        pko_reg_read_idx.s.index = cvmx_pko_get_base_queue(ipd_port);
        cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);
        debug8.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG8);
        if (OCTEON_IS_MODEL(OCTEON_CN68XX))
            status->doorbell = debug8.cn68xx.doorbell;
        else
            status->doorbell = debug8.cn58xx.doorbell;
    }
}

#endif /* CVMX_ENABLE_PKO_FUNCTION */


/**
 * Rate limit a PKO port to a max packets/sec. This function is only
 * supported on CN57XX, CN56XX, CN55XX, and CN54XX.
 *
 * @param port      Port to rate limit
 * @param packets_s Maximum packet/sec
 * @param burst     Maximum number of packets to burst in a row before rate
 *                  limiting cuts in.
 *
 * @return Zero on success, negative on failure
 */
extern int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst);

/**
 * Rate limit a PKO port to a max bits/sec. This function is only
 * supported on CN57XX, CN56XX, CN55XX, and CN54XX.
 *
 * @param port   Port to rate limit
 * @param bits_s PKO rate limit in bits/sec
 * @param burst  Maximum number of bits to burst before rate
 *               limiting cuts in.
 *
 * @return Zero on success, negative on failure
 */
extern int cvmx_pko_rate_limit_bits(int port, uint64_t bits_s, int burst);

/**
 * @INTERNAL
 * 
 * Retrieve the PKO pipe number for a port
 *
 * @param interface
 * @param index
 *
 * @return negative on error.
 *
 * This applies only to the non-loopback interfaces.
 *
 */
extern int __cvmx_pko_get_pipe(int interface, int index);

/**
 * For a given PKO port number, return the base output queue
 * for the port.
 *
 * @param pko_port   PKO port number
 * @return           Base output queue
 */
extern int cvmx_pko_get_base_queue_pkoid(int pko_port);

/**
 * For a given PKO port number, return the number of output queues
 * for the port.
 *
 * @param pko_port	PKO port number
 * @return		the number of output queues
 */
extern int cvmx_pko_get_num_queues_pkoid(int pko_port);

/**
 * Ring the packet output doorbell. This tells the packet
 * output hardware that "len" command words have been added
 * to its pending list.  This command includes the required
 * CVMX_SYNCWS before the doorbell ring.
 *
 * @param pko_port   Port the packet is for
 * @param queue  Queue the packet is for
 * @param len    Length of the command in 64 bit words
 */
static inline void cvmx_pko_doorbell_pkoid(uint64_t pko_port, uint64_t queue, uint64_t len)
{
   cvmx_pko_doorbell_address_t ptr;

   ptr.u64          = 0;
   ptr.s.mem_space  = CVMX_IO_SEG;
   ptr.s.did        = CVMX_OCT_DID_PKT_SEND;
   ptr.s.is_io      = 1;
   ptr.s.port       = pko_port;
   ptr.s.queue      = queue;
   CVMX_SYNCWS;  /* Need to make sure output queue data is in DRAM before doorbell write */
   cvmx_write_io(ptr.u64, len);
}

/**
 * Complete packet output. cvmx_pko_send_packet_prepare() must be called exactly once before this,
 * and the same parameters must be passed to both cvmx_pko_send_packet_prepare() and
 * cvmx_pko_send_packet_finish_pkoid().
 *
 * @param pko_port   Port to send it on
 * @param queue  Queue to use
 * @param pko_command
 *               PKO HW command word
 * @param packet Packet to send
 * @param use_locking
 *               CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE
 *
 * @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output
 */
static inline cvmx_pko_status_t cvmx_pko_send_packet_finish_pkoid(int pko_port, uint64_t queue,
                                        cvmx_pko_command_word0_t pko_command,
                                        cvmx_buf_ptr_t packet, cvmx_pko_lock_t use_locking)
{
    cvmx_cmd_queue_result_t result;
    if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
        cvmx_pow_tag_sw_wait();
    result = cvmx_cmd_queue_write2(CVMX_CMD_QUEUE_PKO(queue),
                                   (use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
                                   pko_command.u64,
                                   packet.u64);
    if (cvmx_likely(result == CVMX_CMD_QUEUE_SUCCESS))
    {
        cvmx_pko_doorbell_pkoid(pko_port, queue, 2);
        return CVMX_PKO_SUCCESS;
    }
    else if ((result == CVMX_CMD_QUEUE_NO_MEMORY) || (result == CVMX_CMD_QUEUE_FULL))
    {
        return CVMX_PKO_NO_MEMORY;
    }
    else
    {
        return CVMX_PKO_INVALID_QUEUE;
    }
}

/**
 * Complete packet output. cvmx_pko_send_packet_prepare() must be called exactly once before this,
 * and the same parameters must be passed to both cvmx_pko_send_packet_prepare() and
 * cvmx_pko_send_packet_finish_pkoid().
 *
 * @param pko_port   The PKO port the packet is for
 * @param queue  Queue to use
 * @param pko_command
 *               PKO HW command word
 * @param packet Packet to send
 * @param addr   Plysical address of a work queue entry or physical address to zero on complete.
 * @param use_locking
 *               CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE
 *
 * @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output
 */
static inline cvmx_pko_status_t cvmx_pko_send_packet_finish3_pkoid(uint64_t pko_port, uint64_t queue,
                                        cvmx_pko_command_word0_t pko_command,
                                        cvmx_buf_ptr_t packet, uint64_t addr, cvmx_pko_lock_t use_locking)
{
    cvmx_cmd_queue_result_t result;
    if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
        cvmx_pow_tag_sw_wait();
    result = cvmx_cmd_queue_write3(CVMX_CMD_QUEUE_PKO(queue),
                                   (use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
                                   pko_command.u64,
                                   packet.u64,
                                   addr);
    if (cvmx_likely(result == CVMX_CMD_QUEUE_SUCCESS))
    {
        cvmx_pko_doorbell_pkoid(pko_port, queue, 3);
        return CVMX_PKO_SUCCESS;
    }
    else if ((result == CVMX_CMD_QUEUE_NO_MEMORY) || (result == CVMX_CMD_QUEUE_FULL))
    {
        return CVMX_PKO_NO_MEMORY;
    }
    else
    {
        return CVMX_PKO_INVALID_QUEUE;
    }
}

#endif /* CVMX_ENABLE_PKO_FUNCTIONS */

#ifdef	__cplusplus
}
#endif

#endif   /* __CVMX_PKO_H__ */