path: root/share/man/man4/aibs.4

.\"	$FreeBSD$
.\"	$NetBSD: aibs.4,v 1.2 2010/02/09 05:37:25 cnst Exp $
.\"	$OpenBSD: aibs.4,v 1.4 2009/07/30 06:30:45 jmc Exp $
.\"
.\" Copyright (c) 2009/2010 Constantine A. Murenin <cnst++@FreeBSD.org>
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" copyright notice and this permission notice appear in all copies.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
.Dd April 4, 2010
.Dt AIBS 4
.Os
.Sh NAME
.Nm aibs
.Nd "ASUSTeK AI Booster ACPI ATK0110 voltage, temperature and fan sensor"
.Sh SYNOPSIS
To compile this driver into the kernel,
place the following line in your
kernel configuration file:
.Bd -ragged -offset indent
.Cd "device aibs"
.Ed
.Pp
Alternatively, to load the driver as a
module at boot time, place the following line in
.Xr loader.conf 5 :
.Bd -literal -offset indent
aibs_load="YES"
.Ed
.Sh DESCRIPTION
The
.Nm
driver provides support for the voltage, temperature and fan sensors
available through the
.Tn ATK0110
.Tn ASOC
.Tn ACPI
device
on
.Tn ASUSTeK
motherboards.
The number of sensors of each type,
as well as the description of each sensor,
varies according to the motherboard.
.Pp
The driver supports an arbitrary set of sensors,
provides descriptions regarding what each sensor is used for,
and reports the current values as well as
the supposed range specifications of each sensor's input
as defined by the motherboard manufacturer through
.Tn ACPI .
.Pp
The range specifications are as follows:
.Bl -bullet
.It
Voltage sensors have a lower and an upper range specification.
.It
Temperature sensors have two upper specifications.
.It
Fan sensors may either have only the lower specification,
or, depending on the
.Tn DSDT ,
one lower and one upper specification.
.El
.Pp
Sensor readings and the range specifications are made available through the
.Xr sysctl 3
interface,
and can be monitored with
.Xr sysctl 8 .
For example, on an ASUS V3-P5G965 barebone:
.Bd -literal -offset indent
> sysctl dev.aibs.0.{volt,temp,fan}
dev.aibs.0.volt.0: 1192 850 1600
dev.aibs.0.volt.1: 3312 2970 3630
dev.aibs.0.volt.2: 5017 4500 5500
dev.aibs.0.volt.3: 12302 10200 13800
dev.aibs.0.temp.0: 28.0C 80.0C 95.0C
dev.aibs.0.temp.1: 55.0C 60.0C 95.0C
dev.aibs.0.fan.0: 878 600 7200
dev.aibs.0.fan.1: 0 700 7200
.Pp
> sysctl -d dev.aibs.0.{volt,temp,fan}
dev.aibs.0.volt:
dev.aibs.0.volt.0: Vcore Voltage
dev.aibs.0.volt.1:  +3.3 Voltage
dev.aibs.0.volt.2:  +5 Voltage
dev.aibs.0.volt.3:  +12 Voltage
dev.aibs.0.temp:
dev.aibs.0.temp.0: CPU Temperature
dev.aibs.0.temp.1: MB Temperature
dev.aibs.0.fan:
dev.aibs.0.fan.0: CPU FAN Speed
dev.aibs.0.fan.1: CHASSIS FAN Speed
.Ed
.Pp
Generally, sensors provided by the
.Nm
driver may also be supported by certain other drivers or utilities
that access the
.Tn ISA /
.Tn LPC
or
.Tn I2C /
.Tn SMBus
devices directly.
The precise collection of
.Nm
sensors is comprised of the sensors
specifically utilised in the motherboard
design, which may be supported through
a combination of one or more physical hardware monitoring chips.
.Pp
The
.Nm
driver, however, provides the following advantages
when compared to the native hardware monitoring drivers or other utilities:
.Bl -bullet
.It
Sensor values from
.Nm
are expected to be more reliable.
For example, voltage sensors in many hardware monitoring chips
can only sense voltage from 0 to 2 or 4 volts, and the excessive
voltage is removed by the resistors, which may vary with the motherboard
and with the voltage that is being sensed.
In
.Nm ,
the required resistor factors are provided by
the motherboard manufacturer through
.Tn ACPI ;
in the native drivers, the resistor factors
are encoded into the driver based on the chip manufacturer's recommendations.
In essence, sensor values from
.Nm
are very likely to be identical to the readings from the
Hardware Monitor screen in the BIOS.
.It
Sensor descriptions from
.Nm
are more likely to match the markings on the motherboard.
.It
Sensor range specifications are supported by
.Nm .
The range specification is reported
for each individual sensor as suggested by the motherboard manufacturer.
For example, the threshold for the CPU temperature sensor is likely
to be significantly higher than that for the chassis temperature sensor.
.It
Support for newer chips in
.Nm .
Newer chips may miss a native driver,
but should be supported through
.Nm
regardless.
.El
.Sh SEE ALSO
.Xr sysctl 3 ,
.Xr acpi 4 ,
.Xr sysctl 8
.Sh HISTORY
The
.Nm
driver first appeared in
.Ox 4.7 ,
.Dx 2.5 ,
.Nx 6.0
and
.Fx 9.0 .
.Pp
An earlier version of the driver,
.Nm acpi_aiboost ,
first appeared in
.Fx 7.0
and
.Nx 5.0 .
.Sh AUTHORS
.An -nosplit
The
.Nm
driver was written for
.Ox ,
.Dx ,
.Nx
and
.Fx
by
.An Constantine A. Murenin Aq cnst@FreeBSD.org ,
Raouf Boutaba Research Group,
David R. Cheriton School of Computer Science,
University of Waterloo.
.Pp
An earlier version of the driver, named
.Nm acpi_aiboost ,
was written for
.Fx
by
.An Takanori Watanabe .