path: root/release/doc/en_US.ISO8859-1/relnotes/common/new.sgml

<articleinfo>
  <title>&os;/&arch; &release.current; Release Notes</title>

  <corpauthor>The FreeBSD Project</corpauthor>

  <pubdate>$FreeBSD$</pubdate>

  <copyright>
    <year>2000</year>
    <year>2001</year>
    <year>2002</year>
    <holder role="mailto:doc@FreeBSD.org">The FreeBSD Documentation Project</holder>
  </copyright>

  <abstract>
    <para>The release notes for &os; &release.current; contain a summary
      of the changes made in the &os; base system since &release.prev;.
      Both changes for kernel and userland are listed, as well as
      applicable security advisories that were issued since the last
      release.  Some brief remarks on upgrading are also presented.</para>
  </abstract>
</articleinfo>

<sect1>
  <title>Introduction</title>

  <para>This document contains the release notes for &os; &release.current; on
  the &arch.print; hardware platform.  It describes new features of &os;
  that have been added (or changed) since &release.prev;.  It also
  provides some notes on upgrading from previous versions of &os;.</para>

<![ %release.type.snapshot [

  <para>The &release.type; distribution to which these release notes
  apply represents a point along the &release.branch; development
  branch between &release.prev; and the future &release.next;.  Some pre-built,
  binary &release.type; distributions along this branch can be found
  at <ulink url="&release.url;"></ulink>.</para>

]]>

<![ %release.type.release [

  <para>This distribution of &os; &release.current; is a &release.type;
  distribution.  It can be found at <ulink
  url="&release.url;"></ulink> or any of its mirrors.  More
  information on obtaining this (or other) &release.type; distributions of
  &os; can be found in the <ulink
  url="http://www.FreeBSD.org/handbook/mirrors.html"><quote>Obtaining
  FreeBSD</quote> appendix</ulink> to the <ulink
  url="http://www.FreeBSD.org/handbook/">FreeBSD Handbook</ulink>.</para>

]]>
</sect1>

<sect1>
  <title>What's New</title>

  <para>This section describes the most user-visible new or changed
  features in &os; since &release.prev;.  Typical release note items
  document new drivers or hardware support, new commands or options,
  major bugfixes, or contributed software upgrades.  Security
  advisories issued after &release.prev; are also listed.  In general, changes
  described here are unique to the &release.branch; branch unless
  specifically marked as &merged; features.</para>

  <para>Many additional changes were made to &os; that are not listed
  here for lack of space.  For example, documentation was corrected
  and improved, minor bugs were fixed, insecure coding practices were
  audited and corrected, and source code was cleaned up.</para>

  <sect2 id="kernel">
    <title>Kernel Changes</title>

    <para>The &man.kqueue.2; event notification facility was added to
    the &os; kernel.  This is a new interface which is able to
    replace &man.poll.2;/&man.select.2;, offering improved performance,
    as well as the ability to report many different types of events.
    Support for monitoring changes in sockets, pipes, fifos, and files
    are present, as well as for signals and processes. &merged;</para>

    <para arch="i386">Support for Intel's Wired for Management 2.0 (PXE)
    was added to the &os; boot loader.  Due to API differences, the
    older PXE versions are not supported.  This allow network booting
    using DHCP. &merged;</para>

    <para arch="i386">The &os; boot loader now contains a workaround
    to support CDROM booting on certain IBM BIOSs that expect the
    first sector of the emulated floppy to contain a valid MS-DOS BPB
    that they can modify. &merged;</para>

    <para arch="i386">The &os; boot loader now supports a
    <option>-p</option> flag to force the kernel to pause after each
    line of output during the probing phase. &merged;</para>

    <para>Support for USB devices was added to the
    <filename>GENERIC</filename> kernel and to the installation
    programs to support USB devices out of the box.  Note that SRM
    does not support USB devices at the moment, so you must still use
    an AT keyboard if you are not using a serial console. &merged;</para>

    <para>POSIX.1b Shared Memory Objects are now supported.  The
    implementation uses regular files, but automatically enables the
    MAP_NOSYNC flag when they are &man.mmap.2;-ed. &merged;</para>

    <para>The &man.agp.4; driver for AGP devices has been added. &merged;</para>

    <para>The kernel and modules have been moved to the directory
    <filename>/boot/kernel</filename>, so they can be easily
    manipulated together.  The boot loader has been updated to make
    this change as seamless as possible.</para>

    <para arch="i386">The i386 boot loader now has support for a 
    <literal>nullconsole</literal>
    console type, for use on systems with neither a video console nor
    a serial port. &merged;</para>

    <para>Replaced the <literal>PQ_*CACHE</literal> options with a
    single <literal>PQ_CACHESIZE</literal> option to be set to
    the cache size in kilobytes.  The old options are still supported
    for backwards compatibility. &merged;</para>

    <para arch="i386">The <literal>NCPU</literal>, <literal>NAPIC</literal>,
    <literal>NBUS</literal>, and <literal>NINTR</literal> kernel
    configuration options, for configuring SMP kernels, have been
    removed.  <literal>NCPU</literal> is now set to a maximum of 16,
    and the other, aforementioned options are now
    dynamic. &merged;</para>

    <para>&man.devfs.5;, which allows entries in the
    <filename>/dev</filename> directory to be built automatically and
    supports more flexible attachment of devices, has been largely
    reworked.  &man.devfs.5; is now enabled by default and can be
    disabled by the <literal>NODEVFS</literal> kernel option.</para>

    <para>Write combining for crashdumps has been implemented.  This
    feature is useful when write caching is disabled on both SCSI and
    IDE disks, where large memory dumps could take up to an hour to
    complete. &merged;</para>

    <para>Extremely large swap areas (&gt;67 GB) no longer panic the
    system.</para>

    <para arch="i386">The &man.ichsmb.4; driver for the Intel 82801AA
    (ICH) SMBus controller and compatibles has been
    added. &merged;</para>

    <para arch="i386">The &man.uscanner.4; driver for basic USB scanner support
    using SANE has been added. See <ulink
    url="http://www.mostang.com/sane/">the SANE home page</ulink> for
    supported scanners. The HP ScanJet 4100C, 5200C and 6300C are
    known to be working.</para>

    <para arch="i386">The umodem driver for USB modems has been added.
    Support is provided for the 3Com 5605 and Metricom Ricochet GS
    wireless USB modems.</para>

    <para arch="alpha">Support for threads under Linux emulation has been
    added.</para>

    <para>A number of cleanups and enhancements have been applied to
    the PCI subsystem.</para>

    <para arch="i386">The &man.spic.4; driver, which provides access to the jog
    dial device on some Sony laptops, has been added.</para>

    <para arch="i386">PECOFF (Win32 Execution file format) support has been
    added.</para>

    <para>A VESA S3 linear framebuffer driver has been added.</para>

    <para>The <maketarget>buildkernel</maketarget> target now gets the
    name of the configuration(s) to build from the
    <varname>KERNCONF</varname> variable, not
    <varname>KERNEL</varname>.  It is no longer required, in some
    cases, for a <maketarget>buildworld</maketarget> to precede a
    <maketarget>buildkernel</maketarget>.  (The
    <maketarget>buildworld</maketarget> is still required when
    upgrading across major releases, across
    <application>binutil</application> updates and when &man.config.8;
    changes version.) &merged;
    </para>

    <para>The &man.random.4; device has been rewritten to use the
    <application>Yarrow</application> algorithm.  It harvests entropy
    from a variety of interrupt sources, including the console
    devices, Ethernet and point-to-point network interfaces, and
    mass-storage devices.  Entropy from the &man.random.4; device is
    now periodically saved to files in
    <filename>/var/db/entropy</filename>, as well as at
    shutdown time.  The semantics of <filename>/dev/random</filename>
    have changed; it never blocks waiting for entropy bits but
    generates a stream of pseudo-random data and now behaves exactly
    as <filename>/dev/urandom</filename>.</para>

    <para>The &man.syscons.4; driver now supports keyboard-controlled
    pasting, by default bound to
    <keycap>Shift</keycap>-<keycap>Insert</keycap>.</para>

    <para>The &man.labpc.4; driver has been removed due to
    <quote>bitrot</quote>.</para>

    <para>A new kernel option, <literal>options REGRESSION</literal>,
    enables interfaces and functionality intended for use during
    correctness and regression testing.</para>

    <para>The <literal>USER_LDT</literal> kernel option is now
    activated by default.</para>

    <para>A new &man.ddb.4; command <command>show pcpu</command> lists
    some of the per-CPU data.</para>

    <para>A new digi driver has been added to support PCI Xr-based and ISA
    Xem Digiboard cards.  A new &man.digictl.8; program is (mainly) used to
    re-initialize cards that have external port modules attached such as
    the PC/Xem.</para>

    <para>The dgm driver has been removed in favor of the digi driver.</para>

    <para>The <literal>O_DIRECT</literal> flag has been added to
    &man.open.2; and &man.fcntl.2;.  Specifying this flag for open
    files will attempt to minimize the cache effects of reading and
    writing. &merged;</para>

    <para>An &man.orm.4; device has been added to claim the option
    ROMs in the ISA memory I/O space, to prevent other drivers from
    mistakenly assigning addresses that conflict with these ROMs. &merged;</para>

    <para>The out-of-swap process termination code now begins killing
    processes earlier to avoid deadlocks; it now also takes into
    account the swap space used by processes when computing the
    process sizes. &merged;</para>

    <para>Linker sets are now self-contained; &man.gensetdefs.8; is
    unnecessary and has been removed.</para>

    <para>Numerous SMP-friendly changes have been made to the kernel's
    mbuf allocator.</para>

    <para>Network device cloning has been implemented, and the &man.gif.4;
    device has been modified to take advantage of it.
    Thus, instead of specifying how many &man.gif.4; interfaces
    are available in kernel configuration files, &man.ifconfig.8;'s
    <option>create</option> option should be used when another device
    instance is desired. &merged;</para>

    <para>The kernel message buffer is now accessible by the
    (machine-independent) <varname>kern.msgbuf</varname> sysctl
    variable; &man.dmesg.8; no longer needs to be SGID
    <groupname>kmem</groupname>.</para>

    <para>Two new &man.ddb.4; commands, <command>hwatch</command> and
    <command>dhwatch</command>, have been introduced.  Analogous to
    <command>watch</command> and <command>dwatch</command>, they install
    hardware watchpoints (as opposed to software watchpoints) if supported
    by the architecture. &merged;</para>

    <para>A &man.nmdm.4; null-modem terminal driver has been added.
    &merged;</para>

    <para>The <varname>maxusers</varname> kernel configuration
    parameter is now a boot-time tunable variable.  The kernel
    parameters derived from <varname>maxusers</varname> are now also
    tunables and can be overridden at boot-time.  The
    <varname>hz</varname> parameter is also now a tunable. &merged;</para>

    <para>Specifying a value of <literal>0</literal> for the
    <varname>maxusers</varname> kernel configuration parameter will
    now cause an appropriate value to be calculated at boot-time
    (between 32 and 512, depending on the amount of memory present).
    This value is now the default for all
    <filename>GENERIC</filename> kernels. &merged;</para>

    <para>It is now possible to hardwire kernel environment variables (such
    as tuneables) at compile-time using &man.config.8;'s
    <literal>ENV</literal> directive.</para>

    <para>The loader and kernel linker now look for files named
    <filename>linker.hints</filename> in each directory with KLDs for a
    module name and version to KLD filename mapping.  The new
    &man.kldxref.8; utility is used to generate these files.</para>

    <para>Idle zeroing of pages can be enabled with the
    <varname>vm.zeroidle_enable</varname> sysctl variable.</para>

    <para arch="i386">The load addresses of kernels are now exported to the
    symbol table and various hard-coded constants have been removed so that
    utilities such as &man.ps.1; can work with kernels compiled at
    different addresses. &merged;</para>

    <para arch="i386">A new <varname>KVA_SPACE</varname> kernel option
    can be used to reconfigure the size of the kernel virtual address
    space. &merged;</para>

    <para>Coredumps of large processes (or of a large number of
    processes) no longer lock up the machine for long periods of
    time. &merged;</para>

    <para>Each &man.jail.2; environment can now run under its own
    securelevel.</para>

    <para arch="alpha">A <varname>MAXMEM</varname> kernel option,
    along with the <varname>hw.physmem</varname> environment variable, can be
    used to artificially reduce the memory size of a machine for
    testing (or other purposes). &merged;</para>

    <para>An &man.eaccess.2; system call has been added, similar to
    &man.access.2; except that the former uses effective credentials
    rather than real credentials.</para>

    <para arch="i386">The &man.amdpm.4; driver has been added to
    provide access to the system monitoring functions of the AMD 756
    chipset. &merged;</para>

    <para>The kernel is now aware of the concept that there are
    smaller units of scheduling than a process (but only one thread
    per process is allowed at this time).</para>

    <para arch="i386">The &man.loader.8; now has optional support
    (enabled at compile-time, off by default) for loading
    <application>bzip2</application>-compressed kernels and
    modules. &merged;</para>

    <para>The kernel now has support for multiple low-level console
    devices.  The new &man.conscontrol.8; utility helps to manage the
    different consoles.</para>

    <para arch="alpha">The console driver has gained support for TGA-based
    display adapters.</para>

    <para arch="i386">A new <filename>cdboot</filename> bootstrap utility for CDROMs provides
    better compatability with some BIOS implementations that do not
    completely implement the El Torito bootable CDROM standard.  This
    boot loader supports <quote>no emulation</quote> mode booting,
    thus eliminating the need for an emulated floppy disk image on
    a bootable CDROM. &merged;</para>

    <para arch="i386">The pmc driver, which supports the power
    management controller of the NEC PC-98NOTE, has been
    added. &merged;</para>

    <para>The kernel configuration parameters
    <varname>MAXTSIZ</varname>, <varname>DFLDSIZ</varname>,
    <varname>MAXDSIZ</varname>, <varname>DFLSSIZ</varname>,
    <varname>MAXSSIZ</varname>, and <varname>SGROWSIZ</varname> are
    all loader tunables (<varname>kern.maxtsiz</varname>,
    <varname>kern.maxdfldsiz</varname>, etc.). &merged;</para>

    <para>The system load average computation now adds some jitter to
    the timing of samples, in order to avoid synchronization with
    processes that run periodically. &merged;</para>

    <para>Linux emulation now supports the kernel functionality
    required by the
    <port>emulators/linux_base-7</port> (RedHat 7.X emulation)
    port. &merged;</para>

    <para>If a debugging kernel with modules is being built
    (i.e. using <literal>makeoptions DEBUG=-g</literal>), the modules
    will now be built with debugging support as well, for
    completeness.  A side effect of this change is that modules built
    and installed with debugging kernels will now occupy more space on
    disk than they did previously. &merged;</para>

    <para>&man.lomac.4;, a Low-Watermark Mandatory Access Control
    security facility, has been added as a kernel module.  It provides
    a drop-in security mechanism in addition to the traditional
    UID-based security facilities, requiring no additional
    configuration from the administrator.  Work on this feature was
    sponsored by DARPA and NAI Labs.</para>

    <para>The tunable sysctl variables for &man.jail.2; have moved
    from <varname>jail.*</varname> to the
    <varname>kern.security.*</varname> hierarchy.</para>

    <sect3>
      <title>Processor/Motherboard Support</title>

      <para>SMP support has been largely reworked, incorporating code
      from BSD/OS 5.0.  One of the main features of SMPng (<quote>SMP
      Next Generation</quote>) is to allow more processes to run in
      kernel, without the need for spin locks that can dramatically
      reduce the efficiency of multiple processors.  Interrupt
      handlers now have contexts associated with them that allow them
      to be blocked, which reduces the need to lock out
      interrupts.</para>

      <para arch="i386">Support for the 80386 processor has been
      removed from the <filename>GENERIC</filename> kernel, as this
      code seriously pessimizes performance on other IA32
      processors.</para>

      <para arch="i386">The <literal>I386_CPU</literal> kernel option
      to support the 80386 processor is now mutually exclusive with
      support for other IA32 processors; this should slightly improve
      performance on the 80386 due to the elimination of runtime
      processor type checks.</para>

      <para arch="i386">Custom kernels that will run on the 80386 can
      still be built by changing the cpu options in the kernel
      configuration file to only include
      <literal>I386_CPU</literal>.</para>

      <para arch="alpha">AlphaServer 1200 (<quote>Tincup</quote>) has
      been tested and works OK.  Currently it does not want to boot
      from CD or floppy but a transplanted disk that was installed on
      another Alpha works well. &merged;</para>

      <para arch="alpha">The API UP1100 mainboard has been verified to work.</para>

      <para arch="alpha">The API CS20 1U high server has been verified to work.</para>

      <para arch="alpha">The DEC3000 series support has been removed from the mfsroot
      floppy image so that it fits on a 1.44 Mbyte floppy again. As the 
      DEC3000 is currently only usable diskless this should not cause
      any problems.</para>

      <para arch="alpha">Support for AlphaServer 2100A (<quote>Lynx</quote>) has been
      added.</para>

      <para arch="alpha">Kernel code has been added that allows older generation Alpha CPUs
      (EV4 and EV5) to emulate instructions of the newer Alpha CPU 
      generations. This enables the use of binary-only programs like <application>Adobe
      Acrobat 4</application> on EV4 and EV5.</para>

      <para arch="alpha">SMP support for the Alpha is now operational.</para>

      <para arch="i386">Detection for new processors, such as the
      FC-PGA2 Pentium III (Tualatin), Transmeta Crusoe, and Transmeta
      Crusoe LongRun, has been added. &merged;</para>

      <para arch="alpha">Support for the following hardware has been removed
      from the installation kernel to make it fit on a 1.44MB floppy again:
      Multia, NoName, PC64, EB64, Aspen Alpine, sa (SCSI tape), amr, parallel
      port support,  vx (3c590, 3c595), pcn (AMD Am79C97x PCI 10/100), 
      sf (Adaptec AIC-6915), sis (SiS 900/SiS 7016), ste (Sundance ST201 
      (D-Link DFE-550TX)), wb (Winbond W89C840F).</para>

      <para arch="i386">Support for Streaming <acronym>SIMD</acronym>
      Extensions (<acronym>SSE</acronym>) has been introduced.  The
      <literal>CPU_ENABLE_SSE</literal> kernel option controls whether
      support is compiled into the kernel. &merged;</para>
    </sect3>

    <sect3>
      <title>Network Interface Support</title>

      <para>The &man.an.4; driver for Cisco Aironet cards now supports
      Wired Equivalent Privacy (WEP) encryption, settable via
      &man.ancontrol.8;. &merged;</para>

      <para>The &man.an.4; driver now supports the Cisco Aironet 350
      series of adaptors. &merged;</para>

      <para>The &man.an.4; driver now supports <quote>monitor</quote>
      mode, settable via the <option>-M</option> option to
      &man.ancontrol.8;. &merged;</para>

      <para arch="i386">The &man.bge.4; driver has been added to
      support the Broadcom BCM570x family of Gigabit Ethernet
      controllers, including the 3Com 3c996-T, the SysKonnect SK-9D21
      and SK-9D41, and the built-in Gigabit Ethernet NICs on Dell
      PowerEdge 2550 servers.  Output TCP/IP checksum offload, jumbo frames
      and VLAN tag insertion/stripping are supported, as well as
      interrupt moderation. &merged;</para>

      <para>The &man.dc.4; driver now supports NICs based on the Xircom
      3201 and Conexant LANfinity RS7112 chips.</para>

      <para>The &man.de.4; driver now performs round-robin arbitration
      between the transmit and receive units of the 21143, instead of
      giving priority to the receive unit.  This gives a 10&ndash;15%
      performance improvement in the forwarding rate under heavy
      load. &merged;</para>

      <para arch="alpha">The &man.ed.4; driver is now supported.</para>

      <para arch="i386">Linksys Fast Ethernet PCCARD cards supported by the
      &man.ed.4; driver now require the addition of flag
      <literal>0x80000</literal> to their config line in
      &man.pccard.conf.5;.  This flag is not optional.  These Linksys
      cards will not be recognized without it. &merged;</para>

      <para>A bug in the &man.ed.4; driver that could cause panics with
      very short packets and BPF or bridging active has been
      fixed. &merged;</para>

      <para>The &man.ed.4; driver now has support for D-Link
      DL10022 chips, necessary for the NetGear FA-410TX and other
      cards.  As a result, <literal>device miibus</literal> is
      required in kernel configurations using the &man.ed.4;
      driver. &merged;</para>

      <para arch="i386">The &man.el.4; driver can now be loaded as a
      module.</para>

      <para arch="i386">The &man.em.4; driver has been added to
      support NICs based on the Intel 82542, 82543, and 82544 Gigabit
      Ethernet controller chips.  The driver supports transmit/receive
      checksum offload and jumbo frames on 82543 and 82544-based
      adapters. &merged;</para>

      <para>The &man.faith.4; device is now loadable, unloadable, and
      clonable. &merged;</para>

      <para arch="i386">Support for Fujitsu MB86960A/MB86965A based Ethernet
      PC-Cards has been added back in the &man.fe.4; driver. &merged;</para>

      <para arch="alpha">The &man.fpa.4; driver now supports Digital's
      DEFPA FDDI adaptors on the Alpha.</para>

      <para>The &man.fxp.4; driver now requires a <literal>device
      miibus</literal> entry in the kernel configuration file. &merged;</para>

      <para>The &man.fxp.4; driver now contains a workaround for 
      PCI protocol violations caused by defects in some systems based
      on the Intel ICH2/ICH2-M chip.  The workaround is to rewrite the
      EEPROM on the interface to disable Dynamic Standby Mode; once
      the EEPROM is rewritten, the system needs to be rebooted for the
      new settings to take effect. &merged;</para>

      <para>The &man.fxp.4; driver now supports Intel's loadable
      microcode to implement receive-side interrupt coalescing and
      packet bundling, on NICs that support these features.  This
      support can be activated by the use of the
      <option>link0</option> option to &man.ifconfig.8;. &merged;</para>

      <para>The &man.gx.4; driver has been added to support NICs based
      on the Intel 82542 and 82543 Gigabit Ethernet controller chips.
      Both fiber and copper variants of the cards are supported.  Both
      boards support VLAN tagging/insertion, and the 82543 additionally
      supports TCP/IP checksum offload. &merged;</para>

      <para>The &man.lge.4; driver has been added to support the Level
      1 LXT1001 NetCellerator Gigabit Ethernet controller chip. This
      device is used on some fiber optic GigE cards from SMC, D-Link
      and Addtron.  Jumbograms and TCP/IP checksum offload on receive
      are supported, although hardware VLAN filtering is not. &merged;</para>

      <para>Added the &man.nge.4; driver, which supports PCI Gigabit
      Ethernet adapters based on the National Semiconductor DP83820
      and DP83821 Gigabit Ethernet controller chips, including the
      D-Link DGE-500T, SMC EZ Card 1000 (SMC9462TX), Asante
      FriendlyNet GigaNIC 1000TA and 1000TPC and Addtron
      AEG320T.  This driver supports transmit and receive checksum
      offloading. &merged;</para>

      <para>The &man.pcn.4; driver, which supports the AMD PCnet/FAST,
      PCnet/FAST+, PCnet/FAST III, PCnet/PRO, PCnet/Home, and HomePNA
      adapters, has been added.  Although these cards are already
      supported by the &man.lnc.4; driver, the &man.pcn.4; driver runs
      these chips in 32-bit mode and uses the RX alignment feature to
      achieve zero-copy receive.  This driver is also
      machine-independent, so it will work on both the i386 and Alpha
      platforms.  The &man.lnc.4; driver is still needed to support non-PCI
      cards. &merged;</para>

      <para>The &man.ray.4; driver, which supports the Webgear Aviator
      wireless network cards, has been committed.  The operation of
      &man.ray.4; interfaces can be modified by
      &man.raycontrol.8;. &merged;</para>

      <para arch="i386">The sbni driver, for supporting the Granch
      SBNI12 series of ISA and PCI point-to-point communications
      interfaces, has been added.  The <port>sysutil/sbniconfig</port>
      port in the &os; Ports Collection can be used for configuring
      these devices. &merged;</para>

      <para>Added support for PCI Ethernet adapters based on the
      National Semiconductor DP83815 chipset, including the NetGear
      FA311-TX and FA312-TX, in the form of the &man.sis.4; driver.
      This device has support for VLANs. &merged;</para>

      <para arch="i386">The snc driver for the National Semiconductor
      DP8393X (SONIC) Ethernet controller has been added.  Currently,
      this driver is only used on the PC-98 architecture. &merged;</para>

      <para>The &man.stf.4; device is now clonable.</para>

      <para>The &man.tap.4; driver, a virtual Ethernet device driver for
      bridged configurations, has been added.  This device is
      clonable.  &merged;</para>

      <para>The &man.ti.4; driver now supports the Alteon AceNIC
      1000baseT Gigabit Ethernet and Netgear GA620T 1000baseT Gigabit
      cards. &merged;</para>

      <para>The &man.ti.4; driver correctly masks VLAN tags. &merged;</para>

      <para>The &man.txp.4; driver has been added to support NICs
      based on the 3Com 3XP Typhoon/Sidewinder (3CR990) chipset. &merged;</para>

      <para>&man.vlan.4; devices are now loadable, unloadable, and
      clonable. &merged;</para>

      <para>The &man.xl.4; driver now supports the 3Com 3C556 and 3C556B
      MiniPCI adapters used on some laptops. &merged;</para>

      <para>The &man.xl.4; driver now supports reception of VLAN
      tagged frames (on the <quote>Cyclone</quote> or newer
      chipsets). &merged;</para>

      <para>The &man.xl.4; driver now supports send- and receive-side TCP/IP
      checksum offloading for NICs implementing this feature, such as
      the 3C905B, 3C905C, and 3C980C. &merged;</para>

      <para>A bug in the &man.xl.4; driver, related to statistics overflow
      interrupt handling, was causing slowdowns at medium to high
      packet rates; this has been fixed. &merged;</para>

      <para>The per-interface <varname>ifnet</varname> structure now
      has the ability to indicate a set of capabilities supported by a
      network interface, and which ones are enabled.  &man.ifconfig.8;
      has support for querying these capabilities. &merged;</para>

      <para>Performance with hosts having a large number of IP aliases
      has been improved, by replacing the per-interface
      <varname>if_inaddr</varname> linear list with a hash table. &merged;</para>

      <para>Network devices now automatically appear as special files in
      <filename>/dev/net</filename>.  Interface hardware ioctls (not
      protocol or routing) can be performed on these devices.  The
      <varname>SIOCGIFCONF</varname> ioctl may be performed on the
      special <filename>/dev/network</filename> node.</para>

      <para arch="i386">Selected network drivers now implement a
      semi-polling mode, which makes systems much more resilient to
      attacks and overloads.  To enable polling, the following options
      are required in a kernel configuration file:

      <programlisting>options DEVICE_POLLING
options HZ=1000 # not compulsory but strongly recommended</programlisting>

      The <varname>kern.polling.enable</varname> sysctl variable
      will then activate polling mode; with the
      <varname>kern.polling.user_frac</varname> sysctl indicating the
      percentage of CPU time to be reserved for userland.  The devices
      initially supporting polling are &man.dc.4;, &man.fxp.4;, and
      &man.sis.4;.</para>

      <para arch="i386">The packet-forwarding performance of certain
      network drivers (specifically &man.dc.4; and &man.sis.4;) has
      been enhanced by the elimination of unnecessary buffer
      copies. &merged;</para>
    </sect3>

    <sect3>
      <title>Network Protocols</title>

      <para>&man.accept.filter.9;, a kernel feature to reduce overheads
      when accepting and reading new connections on listening sockets,
      has been added. &merged;</para>

      <para>The <literal>proxy</literal> modifier to &man.arp.8;'s
      <option>-d</option> option has been renamed to
      <literal>pub</literal>, for consistency with the
      <option>-s</option> option.  The <literal>only</literal> keyword
      has been added to the <option>-s</option> and
      <option>-S</option> flags, to be used in creating
      <quote>proxy-only</quote> published entries.</para>

      <para>&man.bridge.4; and &man.dummynet.4; have received some
      enhancements and bug fixes, and are now loadable
      modules. &merged;</para>

      <para>ICMP ECHO and TSTAMP replies are now rate limited.  TCP RSTs
      generated due to packets sent to open and unopen ports are now
      limited by separate counters.  Each rate limiting queue now has
      its own description.</para>

      <para>ICMP <literal>UNREACH_FILTER_PROHIB</literal> messages can
      now RST TCP connections in the <literal>SYN_SENT</literal> state
      if the correct sequence numbers are sent back, as controlled by the
      <varname>net.inet.tcp.icmp_may_rst</varname>
      sysctl.</para>

      <para>IP multicast now works on VLAN devices.  Several other
      bugs in the VLAN code have also been fixed.</para>

      <para>&man.ipfw.4; now filters correctly in the presence of ECN bits in TCP
      segments. &merged;</para>

      <para>&man.netgraph.4; has received some updates and bugfixes.</para>

      <para>A new &man.ng.eth.4; netgraph node allows Ethernet type
      packets to be filtered to different hooks depending on
      ethertype.</para>

      <para>The &man.ng.gif.4; and &man.ng.gif.demux.4; netgraph
      nodes, for operating on &man.gif.4; devices, have been
      added.</para>

      <para>The &man.ng.ip.input.4; netgraph node, for queueing IP
      packets into the main IP input processing code, has been
      added.</para>

      <para>The &man.ng.mppc.4; and &man.ng.bridge.4; node types have
      been added to the &man.netgraph.4; subsystem.  The &man.ng.ether.4; node
      is now dynamically loadable.  Miscellaneous bug fixes and
      enhancements have also been made. &merged;</para>

      <para>A new netgraph node type &man.ng.one2many.4; for multiplexing
      and demultiplexing packets over multiple links has been added.
      &merged;</para>

      <para>A new sysctl <varname>net.inet.ip.check_interface</varname>,
      which is on by default, causes IP to verify that an incoming
      packet arrives on an interface that has an address matching the
      packet's destination address. &merged;</para>

      <para>A new sysctl
      <varname>net.link.ether.inet.log_arp_wrong_iface</varname> has
      been added to control the suppression of logging when ARP replies
      arrive on the wrong interface. &merged;</para>

      <para>A new <literal>options RANDOM_IP_ID</literal> kernel
      option causes the ID field of IP packets to be randomized.  This
      closes a minor information leak which allows a remote observer
      to determine the rate at which the machine is generating
      packets, since the default behavior is to increment a counter
      for each packet sent. &merged;</para>

      <para arch="alpha">SLIP has been removed from the
      <filename>mfsroot</filename> floppy image.</para>

      <para>TCP has received some bug fixes for its delayed ACK
      behavior. &merged;</para>

      <para>TCP now supports the NewReno modification to the TCP Fast Recovery
      algorithm.  This behavior can be controlled via the
      <varname>net.inet.tcp.newreno</varname> sysctl variable. &merged;</para>

      <para>TCP now uses a more aggressive timeout for initial SYN segments; this
      allows initial connection attempts to be dropped much
      faster. &merged;</para>

      <para>The <literal>TCP_COMPAT_42</literal> kernel option has
      been removed.</para>

      <para>The <literal>TCP_RESTRICT_RST</literal> kernel option has
      been removed.  Similar functionality can be achieved with the
      <varname>net.inet.tcp.blackhole</varname> sysctl
      variable. &merged;</para>

      <para>TCP now has RFC 1323 extensions enabled by default in
      &man.rc.conf.5;. &merged;</para>

      <para>RFC 1323 and RFC 1644 TCP extensions are now disabled for a
      connection in progress if no response has been received by the
      third SYN segment sent.  This behavior tries to work around
      (very old) terminal servers with buggy VJ header compression
      implementations. &merged;</para>

      <para>The TCP implementation no longer requires the
      allocation of a TCP template structure for each connection; this
      should reduce the buffer usage on large systems handling many
      connections. &merged;</para>

      <para>TCP's default buffer sizes, controlled by the
      <varname>net.inet.tcp.sendspace</varname> and 
      <varname>net.inet.tcp.recvspace</varname> sysctl variables, have
      been increased to 32K and 64K respectively.  Previously, the
      default for both buffer sizes was 16K.  To try to avoid
      increasing congestion, the default value for
      <varname>net.inet.tcp.local_slowstart_flightsize</varname> has
      been changed from infinity to 4. &merged;</para>

      <para>TCP now supports RFC 1948 (Defending Against Sequence
      Number Attacks).  This functionality is controlled by the 
      <varname>net.inet.tcp.strict_rfc1948</varname> and
      <varname>net.inet.tcp.isn_reseed_interval</varname> sysctl
      variables. &merged;</para>

      <para>The TCP implementation in &os; now implements a cache of
      outstanding, received SYN segments.  Incoming SYN segments now
      cause entries to be placed in the cache until the TCP three-way
      handshake is complete, at which point, memory is allocated for
      the connection as usual.  In addition, all TCP Initial Sequence
      Numbers (ISNs) are used as cookies, allowing entries in the
      cache to be dropped, but still have their corresponding ACKs
      accepted later.  The combination of the so-called
      <quote>syncache</quote> and <quote>syncookies</quote> features
      makes a host much more resistant to
      TCP-based Denial of Service attacks.  Work on this feature was
      sponsored by DARPA and NAI Labs. &merged;</para>

      <para>A bug in the TCP implementation, which could cause
      connections to stall if a sender saw a zero-sized window, has
      been corrected. &merged;</para>
    </sect3>

    <sect3>
      <title>Disks and Storage</title>

      <para arch="i386">Support for the Adaptec FSA family of PCI-SCSI
      RAID controllers has been added, in the form of the &man.aac.4;
      driver. &merged;</para>

      <para arch="i386">The &man.aac.4; driver now supports the Adaptec
      SCSI RAID 5400S controller. &merged;</para>

      <para arch="i386">The &man.aac.4; driver has been updated to
      include proper handling of commands initiated by the adapter,
      addition/removal of disk devices, crashdump functionality, and
      &man.ioctl.2; command necessary for the management
      CLI. &merged;</para>

      <para>The &man.ahc.4; driver has received numerous updates,
      bugfixes, and enhancements.  Among various improvements are
      improved compatibility with chips in <quote>RAID Port</quote> mode
      and systems with AAA and/or ARO cards installed, as well as
      performance improvements. Some bugs were also fixed, including a
      rare hang on Ultra2/U160 controllers. &merged;</para>

      <para arch="i386">The &man.asr.4; driver, which provides support
      for the Adaptec SCSI RAID controller family, as well as the DPT
      SmartRAID V and VI families, has been added. &merged;</para>

      <para arch="i386">The &man.asr.4; driver now supports the Adaptec
      2000S and 2005S Zero-Channel RAID controllers. &merged;</para>

      <para>The &man.ata.4; driver now has support for ATA100
      controllers.  In addition, it now supports the ServerWorks ROSB4
      ATA33 chipset, the CMD 648 ATA66 and CMD 649 ATA100 chipsets, and
      the Cyrix 5530. &merged;</para>

      <para>To provide more flexible configuration, the various options for the
      &man.ata.4; driver are now boot loader tunables, rather than kernel
      configure-time options. &merged;</para>

      <para>The &man.ata.4; driver now has support for tagged queuing,
      which is enabled by the <varname>hw.ata.tags</varname> loader
      tunable. &merged;</para>

      <para>The &man.ata.4; driver now has support for ATA
      <quote>pseudo</quote> RAID controllers as the Promise Fasttrak and
      HighPoint HPT370 controllers. &merged;</para>

      <para>The &man.ata.4; driver now supports a wider variety of SiS
      chipsets, as listed in the Hardware Notes. &merged;</para>

      <para>The BurnProof(TM) feature, for applicable ATAPI CD-ROM burners, is now
      supported. &merged;</para>

      <para>The &man.ata.4; driver now has support for 48-bit
      addressing.  Devices larger than 137GB are now
      supported. &merged;</para>

      <para>The CAM error recovery code has been updated.</para>

      <para>The &man.cd.4; driver now has support for write operations.
      This allows writing to DVD-RAM, PD and similar drives that probe
      as CD devices.  Note that change affects only random-access
      writeable devices, not sequential-only writeable devices such as
      CD-R drives, which are supported by &man.cdrecord.1; (a part of 
      <port>sysutils/cdrtools</port> in the Ports Collection. &merged;</para>

      <para arch="i386">The ciss driver, for devices utilizing the Common
      Interface for SCSI-3 Support, has been added.  This driver
      supports the Compaq SmartRAID 5* family of RAID controllers
      (5300, 532, 5i). &merged;</para>

      <para>The &man.fdc.4; floppy disk has undergone a number of
      enhancements.  Density selection for common settings is now
      automatic; the driver is also much more flexible in setting the
      densities of various subdevices.</para>

      <para>The ida disk driver now has crashdump support. &merged;</para>

      <para arch="alpha">A bug that made certain CDROM drives fail to
      attach when connected to a SCSI card driven by &man.isp.4; has
      been fixed. &merged;</para>

      <para>The &man.isp.4; driver is now proactive about discovering
      Fibre Channel topology changes.</para>

      <para>The &man.isp.4; driver now supports target mode for Qlogic
      SCSI cards, including Ultra2 and Ultra3 and dual bus cards.</para>

      <para>The &man.isp.4; driver now supports the Qlogic 2300 and
      2312 Optical Fibre Channel PCI cards. &merged;</para>

      <para>&man.md.4;, the memory disk device, has had the
      functionality of &man.vn.4; incorporated into it.  &man.md.4;
      devices can now be configured by &man.mdconfig.8;.  &man.vn.4; has
      been removed.  The Memory Filesystem (MFS) has also been
      removed.</para>

      <para arch="i386">The &man.mly.4; driver, for Mylex PCI to SCSI
      AccelRAID and eXtremeRAID controllers with firmware 6.X and
      later, has been added. &merged;</para>

      <para arch="i386">The ncv, nsp, and stg drivers have
      been ported from NetBSD/pc98.  They support the NCR 53C50 /
      Workbit Ninja SCSI-3 / TMC 18C30, 18C50 based PC-Card/ISA SCSI
      controllers.  All three drivers can be built and loaded as
      modules. &merged;</para>

      <para>Some problems in &man.sa.4; error handling have been
      fixed, including the <quote>tape drive spinning indefinitely
      upon &man.mt.1; <option>stat</option></quote> problem.</para>

      <para arch="i386">The &man.twe.4; 3ware ATA RAID driver has added. &merged;</para>

      <para>The &man.vinum.4; volume manager has received some bug fixes and
      enhancements.</para>

      <para>The &man.wd.4; compatibility devices were removed from the
      &man.ata.4; driver. &merged;</para>
    </sect3>

    <sect3>
      <title>Filesystems</title>

      <para>Support for named extended attributes was added to the &os;
      kernel.  This allows the kernel, and appropriately privileged
      userland processes, to tag files and directories with attribute
      data.  Extended attributes were added to support the TrustedBSD
      Project, in particular ACLs, capability data, and mandatory access
      control labels (see
      <filename>/usr/src/sys/ufs/ufs/README.extattr</filename> for
      details).</para>

      <para>Due to a licensing change, softupdates have been integrated
      into the main portion of the kernel source tree.  As a
      consequence, softupdates are now available with the
      <filename>GENERIC</filename> kernel. &merged;</para>

      <para>A filesystem snapshot capability has been added to FFS.
      Details can be found in
      <filename>/usr/src/sys/ufs/ffs/README.snapshot</filename>.</para>

      <para>Softupdates for FFS have received some bug fixes and
      enhancements.</para>

      <para>When running with softupdates, &man.statfs.2; and
      &man.df.1; will track the number of blocks and files that are
      committed to being freed.</para>

      <para>A bug in FFS that could cause superblock corruption on very large
      filesystems has been corrected. &merged;</para>

      <para>The Inode Filesystem (IFS) has been added; more information
      can be found in
      <filename>/usr/src/sys/ufs/ifs/README</filename>.</para>

      <para>The ISO-9660 filesystem now has a hook that supports a loadable
      character conversion routine.  The
      <port>sysutils/cd9660_unicode</port> port
      contains a set of common conversions.</para>

      <para>&man.kernfs.5; is obsolete and has been retired.</para>

      <para>A bug in the NFS client that caused bogus access times with
      <literal>O_EXCL|O_CREAT</literal> opens was fixed. &merged;</para>

      <para>A new NFS hash function (based on the Fowler/Noll/Vo hash
      algorithm) has been implemented to improve NFS performance by
      increasing the efficiency of the <varname>nfsnode</varname> hash
      tables. &merged;</para>

      <para>Client-side NFS locks have been implemented.</para>

      <para>The client-side and server-side of the NFS code in the
      kernel used to be intertwined in various complex ways.  They
      have been split apart for ease of maintenance and further
      development.</para>

      <para>Support for file system Access Control Lists (ACLs) has been
      introduced, allowing more fine-grained control of discretionary
      access control on files and directories.  This support was
      integrated from the TrustedBSD Project.  More details can be found in
      <filename>/usr/src/sys/ufs/ufs/README.acls</filename>.</para>

      <para>The directory layout preference algorithm for FFS
      (<literal>dirprefs</literal>) has been changed.  Rather than
      scattering directory blocks across a disk, it attempts to group
      related directory blocks together.  Operations traversing large
      directory hierarchies, such as the &os; Ports tree, have shown
      marked speedups.  This change is transparent and automatic for
      new directories. &merged;</para>

      <para arch="i386">smbfs (CIFS) support in kernel has been added.
      The userland programs &man.smbutil.1; and &man.mount.smbfs.8;
      can be used to work with SMB shares.  Note that
      &man.mount.smbfs.8; will automatically load the <filename>smbfs.ko</filename>
      module into the kernel, even if <literal>LIBMCHAIN</literal> and
      <literal>LIBICONV</literal> were not compiled into the kernel.
      &merged;</para>

      <para>For consistency, the fdesc, fifo, null, msdos, portal,
      umap, and union filesystems have been renamed to fdescfs,
      fifofs, msdosfs, nullfs, portalfs, umapfs, and unionfs.  Where
      applicable, modules and mount_* programs have been
      renamed.  Compatibility <quote>glue</quote> has been added to
      &man.mount.8; so that <literal>msdos</literal> filesystem
      entries in &man.fstab.5; will work without changes.</para>

      <para>pseudofs, a pseudo-filesystem framework, has been added.
      &man.linprocfs.5; and &man.procfs.5; have been modified to use pseudofs.</para>

      <para>A simple hash-based lookup optimization for large directories
      called <literal>dirhash</literal> has been added.  Conditional on the
      <literal>UFS_DIRHASH</literal> kernel option (enabled by default
      in the <filename>GENERIC</filename> kernel), it improves the speed
      of operations on very large directories at the expense of some
      memory. &merged;</para>

      <para>The virtual memory subsystem now backs UFS directory
      memory requirements by default (this behavior is controlled via
      the <varname>vfs.vmiodirenable</varname> sysctl variable). &merged;</para>

      <para>A bug that prevented the root filesystem from being
      mounted from a SCSI CDROM has been fixed (ATAPI CDROMs were
      always supported). &merged;</para>

      <para>A number of bugs in the filesystem code, discovered
      through the use of the <application>fsx</application> filesystem test tool, have been fixed.
      Under certain circumstances (primarily related to use of NFS),
      these bugs could cause data corruption or kernel panics. &merged;</para>

      <para>Network filesystems (such as NFS and smbfs filesystems)
      listed in <filename>/etc/fstab</filename> can now be properly
      mounted during startup initialization; their mounts are deferred
      until after the network is initialized.</para>
    </sect3>

    <sect3>
      <title>PCCARD Support</title>

      <para arch="i386">The pccard driver and &man.pccardc.8; now support multiple
      <quote>beep types</quote> upon card insertion and removal. &merged;</para>

      <para>On many modern hosts, PCCARD devices can be configured to
      route their interrupts via either the ISA or PCI interrupt paths.
      The &man.pcic.4; driver has been updated to support both interrupt
      paths (formerly, only routing via ISA was supported).  &merged; In most
      cases, configuration of PCMCIA devices in laptops is simpler and
      more flexible.  In addition, various Cardbus bridge PCI cards
      (such as those used by Orinoco PCI NICs) are now supported.  Some
      hosts may experience problems, such as hangs or panics, with PCI
      interrupt routing; they can frequently be made to work by forcing
      the older-style ISA interrupt routing.  The following lines,
      placed in <filename>/boot/loader.conf</filename>, may fix the
      problem:</para>

      <programlisting>hw.pcic.intr_path="1"
  hw.pcic.irq="0"</programlisting>

      <para>When installing &os; on such a system, typing the following
      lines to the boot loader may be helpful in starting up &os; for
      the first time:<para>

      <screen><prompt>ok</prompt> <userinput>set hw.pcic.intr_path="1"</userinput>
<prompt>ok</prompt> <userinput>set hw.pcic.irq="0"</userinput></screen>

      <para arch="i386">Preliminary Cardbus support under NEWCARD has been added.
      This code supports the TI113X, TI12XX, TI125X, Ricoh 5C46/5C47, Topic
      95/97/100 and Cirrus Logic PD683X bridges.  16-bit PC Card support
      is not yet functional.</para>
    </sect3>

    <sect3>
      <title>Multimedia Support</title>

      <para arch="i386">The &man.pcm.4; driver now supports the ESS Solo 1,
      Maestro-1, Maestro-2, and Maestro-2e; Forte Media fm801, ESS
      Maestro-2e, and VIA Technologies VT82C686A sound card/chipsets,
      and has received some other updates. 
      Separate drivers for the SoundBlaster 8 and SoundBlaster 16 now
      replace an older, unified driver.  A driver for the CMedia
      CMI8338/CMI8738 sound chips has been added.  A driver for the
      CS4281 sound chip has been added.  A driver for the S3
      SonicVibes chipset has been added. &merged;</para>

      <para arch="i386">A driver for the Avance Logic ALS4000 has
      been added. &merged;</para>

      <para arch="i386">A driver for the
      ESS Maestro-3/Allegro has been added, however due to licensing
      restrictions, it cannot be compiled into the kernel. &merged; To
      use this driver, add the following line to
      <filename>/boot/loader.conf</filename>:</para>

      <programlisting>snd_maestro3_load="YES"</programlisting>

      <para>The &man.bktr.4; driver has been updated to 2.18.  This
      update provides a number of new features.  New tuner
      types have been added, and improvements to the KLD module and to
      memory allocation have been made.  Bugs in &man.devfs.5; when
      unloading and reloading have been fixed.
      Support for new Hauppauge Model 44xxx WinTV Cards (the ones with
      no audio mux) has been added.</para>

      <para>When sound modules are built, one can now load all the
      drivers and infrastructure by <command>kldload
      snd</command>.</para>

      <para>A new API has been added for sound cards with hardware
      volume control.</para>

      <para arch="i386">A driver for the Intel 443MX, 810, 815, and 815E
      integrated sound devices has been added.</para>

    </sect3>

    <sect3>
      <title>Contributed Software</title>

      <para>The Forth Inspired Command Language
      (<application>FICL</application>) used in the boot loader has
      been updated to 2.05.</para>

      <para>Support for Advanced Configuration and Power Interface
      (ACPI), a multi-vendor standard for configuration and power
      management, has been added.  This functionality has been
      provided by the <application>Intel ACPI Component
      Architecture</application> project, updated to the ACPI CA
      20011120 snapshot.  Some backward compatability for
      applications using the older APM standard has been provided.</para>

      <sect4>
        <title>IPFilter</title>

	<para><application>IPFilter</application> has been updated to
	3.4.20. &merged;</para>

	<para><application>IPFilter</application> now supports
	IPv6. &merged;</para>

      </sect4>

      <sect4 arch="i386">
        <title>isdn4bsd</title>

	<para><application>isdn4bsd</application> has been updated to
	version 1.0.1.  As a result of this update, users of the
	&man.i4bisppp.4; (kernel PPP over ISDN) driver
	<emphasis>must</emphasis> now use &man.ispppcontrol.8; instead
	of &man.spppcontrol.8; to configure and control these
	network interfaces. &merged;</para>

	<para>The &man.ifpi.4; driver for supporting the AVM
	Fritz!Card PCI version 2 controller has been added.</para>

	<para>The &man.ihfc.4; driver for supporting Cologne Chip
        Designs HFC devices under <application>isdn4bsd</application>
        has been added. &merged;</para>

        <para>The &man.itjc.4; driver for supporting NETjet-S / Teles
        PCI-TJ devices under <application>isdn4bsd</application> has
        been added. &merged;</para>

        <para>Experimental support for the Eicon.Diehl DIVA 2.0 and
        2.02 ISA PnP ISDN cards has been added to the &man.isic.4;
        <application>isdn4bsd</application> driver. &merged;</para> 

	<para>The &man.isic.4; driver now supports the Compaq Microcom
	610 ISDN ISA PnP card. &merged;</para>

	<para>Active CAPI-based ISDN cards manufactured by AVM are now
	supported using the &man.i4bcapi.4; and the &man.iavc.4; driver.  The
	supported cards are the AVM B1 PCI and AVM B1 ISA Basic Rate
	cards and the AVM T1 Primary Rate cards. &merged;</para>

	<para>A new <literal>maxconnecttime</literal> keyword is now
	accepted in &man.isdnd.rc.5; files to limit the time a
	connection may remain open. &merged;</para>

	<para>&man.isdnphone.8; now supports a <option>-k</option> option for
	sending messages via the keypad facility to a PBX or exchange
	office. &merged;</para>
      </sect4>

      <sect4 id="kame-kernel">
        <title>KAME</title>

        <para>The IPv6 stack is now based on a snapshot based on the KAME
	Project's IPv6 snapshot as of 28 May, 2001.  Most of the
	items listed in this section are a result of this import.
	<xref linkend="kame-userland"> lists userland updates to the
	KAME IPv6 stack. &merged;</para>

        <para>&man.gif.4; is now based on RFC 2893, rather than RFC
	1933.  The <literal>IFF_LINK2</literal> interface flag can
	be used to control ingress filtering. &merged;</para>

	<para><application>IPSec</application> has received some
	enhancements, including the ability to use the Rijndael and
	SHA2 algorithms.  IPSec RC5 support has been removed due to
	patent issues. &merged;</para>

	<para>&man.stf.4; now conforms to RFC 3056; the
	<literal>IFF_LINK2</literal> interface flag can be used to
	control ingress filtering. &merged;</para>

	<para>IPv6 has better checking of illegal addresses (such as
	loopback addresses) on physical networks. &merged;</para>

	<para>The <varname>IPV6_V6ONLY</varname> socket option is
	now completely supported.  The kernel's default behavior
	with respect to this option is controlled by the
	<varname>net.inet6.ip6.v6only</varname> sysctl
	variable. &merged;</para>

	<para>RFC 3041 (Privacy Extensions for Stateless Address
	Autoconfiguration) is now supported.  It can be enabled via
	the <varname>net.inet6.ip6.use_tempaddr</varname> sysctl
	variable. &merged;</para>
      </sect4>
    </sect3>
  </sect2>
  <sect2 id="security">
    <title>Security-Related Changes</title>

    <para>&man.sysinstall.8; now allows the user to select one of two
    <quote>security profiles</quote> at install-time.  These profiles enable
    different levels of system security by enabling or disabling
    various system services in &man.rc.conf.5; on new
    installs. &merged;</para>

    <para>A bug in which malformed ELF executable images can hang the
    system has been fixed (see security advisory
    FreeBSD-SA-00:41). &merged;</para>

    <para>A security hole in Linux emulation was fixed (see security
    advisory FreeBSD-SA-00:42). &merged;</para>

    <para>String-handling library calls in many programs were fixed to
    reduce the possibility of buffer overflow-related exploits.
    &merged;</para>

    <para>TCP now uses stronger randomness in choosing its initial sequence 
    numbers (see security advisory FreeBSD-SA-00:52). &merged;</para>

    <para>Several buffer overflows in &man.tcpdump.1; were corrected
    (see security advisory FreeBSD-SA-00:61). &merged;</para>

    <para>A security hole in &man.top.1; was corrected (see security advisory
    FreeBSD-SA-00:62). &merged;</para>

    <para>A potential security hole caused by an off-by-one-error in
    &man.gethostbyname.3; has been fixed (see security advisory
    FreeBSD-SA-00:63). &merged;</para>

    <para>A potential buffer overflow in the &man.ncurses.3; library,
    which could cause arbitrary code to be run from within
    &man.systat.1;, has been corrected (see security advisory
    FreeBSD-SA-00:68). &merged;</para>

    <para>A vulnerability in &man.telnetd.8; that could cause it to
    consume large amounts of server resources has been fixed (see
    security advisory FreeBSD-SA-00:69). &merged;</para>

    <para>The <literal>nat deny_incoming</literal> command in
    &man.ppp.8; now works correctly (see security advisory
    FreeBSD-SA-00:70). &merged;</para>

    <para>A vulnerability in &man.csh.1;/&man.tcsh.1; temporary files
    that could allow overwriting of arbitrary user-writable files has
    been closed (see security advisory FreeBSD-SA-00:76). &merged;</para>

    <para>The &man.ssh.1; binary is no longer SUID root by
    default. &merged;</para>

    <para>Some fixes were applied to the Kerberos
    IV implementation related to environment variables, a
    possible buffer overrun, and overwriting ticket files. &merged;</para>

    <para>&man.telnet.1; now does a better job of sanitizing its
    environment. &merged;</para>

    <para>Several vulnerabilities in &man.procfs.5; were fixed (see
    security advisory FreeBSD-SA-00:77). &merged;</para>

    <para>A bug in <application>OpenSSH</application> in which a
    server was unable to disable &man.ssh-agent.1; or
    <literal>X11Forwarding</literal> was fixed (see security advisory
    FreeBSD-SA-01:01). &merged;</para>

    <para>A bug in &man.ipfw.8; and &man.ip6fw.8; in which inbound TCP
    segments could incorrectly be treated as being part of an
    <literal>established</literal> connection has been fixed (see
    security advisory FreeBSD-SA-01:08). &merged;</para>
 
    <para>A bug in &man.crontab.1; that could allow users to read any
    file on the system in valid &man.crontab.5; syntax has been fixed
    (see security advisory FreeBSD-SA-01:09). &merged;</para>

    <para>A vulnerability in &man.inetd.8; that could allow
    read-access to the initial 16 bytes of
    <groupname>wheel</groupname>-accessible files has been fixed (see security
    advisory FreeBSD-SA-01:11). &merged;</para>

    <para>A bug in &man.periodic.8; that used insecure temporary files has been
    corrected (see security advisory FreeBSD-SA-01:12). &merged;</para>

    <para>A bug in &man.sort.1; in which an attacker might be able to
    cause it to abort processing has been fixed (see security advisory
    FreeBSD-SA-01:13). &merged;</para>

    <para><application>OpenSSH</application> now has code to prevent
    (instead of just mitigating through connection limits) an attack
    that can lead to guessing the server key (not host key) by
    regenerating the server key when an RSA failure is detected (see
    security advisory FreeBSD-SA-01:24). &merged;</para>

    <para>A number of programs have had output formatting strings
    corrected so as to reduce the risk of vulnerabilities. &merged;</para>

    <para>A number of programs that use temporary files now do so more
    securely. &merged;</para>

    <para>A bug in ICMP that could cause an attacker to disrupt TCP and UDP
    <quote>sessions</quote> has been corrected. &merged;</para>

    <para>A bug in &man.timed.8;, which caused it to crash if send
    certain malformed packets, has been corrected (see security
    advisory FreeBSD-SA-01:28). &merged;</para>

    <para>A bug in &man.rwhod.8;, which caused it to crash if send
    certain malformed packets, has been corrected (see security
    advisory FreeBSD-SA-01:29). &merged;</para>

    <para>A security hole in &os;'s FFS and EXT2FS implementations,
    which allowed a race condition that could cause users to have
    unauthorized access to data, has been fixed (see security advisory
    FreeBSD-SA-01:30). &merged;</para>

    <para>A remotely-exploitable vulnerability in &man.ntpd.8; has
    been closed (see security advisory FreeBSD-SA-01:31). &merged;</para>

    <para>A security hole in <application>IPFilter</application>'s 
    fragment cache has been closed (see
    security advisory FreeBSD-SA-01:32). &merged;</para>

    <para>Buffer overflows in &man.glob.3;, which could cause
    arbitrary code to be run on an FTP server, have been closed.  In
    addition, to prevent some forms of DOS attacks, &man.glob.3;
    allows specification of a limit on the number of pathname matches
    it will return.  &man.ftpd.8; now uses this feature (see security
    advisory FreeBSD-SA-01:33). &merged;</para>

    <para>Initial sequence numbers in TCP are more thoroughly
    randomized (see security advisory FreeBSD-SA-01:39).  Due to some
    possible compatibility issues, the behavior of this security fix
    can be enabled or disabled via the 
    <varname>net.inet.tcp.tcp_seq_genscheme</varname> sysctl 
    variable.&merged;</para>

    <para>A vulnerability in the &man.fts.3; routines (used by
    applications for recursively traversing a filesystem) could
    allow a program to operate on files outside the intended directory
    hierarchy.  This bug has been fixed (see security advisory
    FreeBSD-SA-01:40). &merged;</para>

    <para>&os;'s TCP implementation has been made more resistant to
    SYN floods, by eliminating the RST segment normally sent when
    removing a connection from the listen queue.</para>

    <para><application>OpenSSH</application> now switches to the
    user's UID before attempting to unlink the authentication
    forwarding file, nullifying the effects of a race.</para>

    <para>A flaw allowed some signal handlers to remain in effect in a
    child process after being exec-ed from its parent.  This allowed
    an attacker to execute arbitrary code in the context of a setuid
    binary.  This flaw has been corrected (see security advisory
    FreeBSD-SA-01:42). &merged;</para>

    <para>A remote buffer overflow in &man.tcpdump.1; has been fixed
    (see security advisory FreeBSD-SA-01:48). &merged;</para>

    <para>A remote buffer overflow in &man.telnetd.8; has been
    fixed (see security advisory FreeBSD-SA-01:49). &merged;</para>

    <para>The new <varname>net.inet.ip.maxfragpackets</varname> 
    and <varname>net.inet.ip6.maxfragpackets</varname> sysctl
    variables limit the amount of memory that can be consumed by IPv4
    and IPv6 packet fragments, which defends against some denial of service
    attacks (see security advisory FreeBSD-SA-01:52). &merged;</para>

    <para>All services in <filename>inetd.conf</filename> are now
    disabled by default for new installations.  &man.sysinstall.8;
    gives the option of enabling or disabling &man.inetd.8; on new
    installations, as well as editing
    <filename>inetd.conf</filename>. &merged;</para>

    <para>A flaw in the implementation of the &man.ipfw.8;
    <literal>me</literal> rules on point-to-point links has been
    corrected.  Formerly, <literal>me</literal> filter rules would
    match the remote IP address of a point-to-point interface in
    addition to the intended local IP address (see security advisory
    FreeBSD-SA-01:53). &merged;</para>

    <para>A vulnerability in &man.procfs.5;, which could allow a
    process to read sensitive information from another process's
    memory space, has been closed (see security advisory
    FreeBSD-SA-01:55). &merged;</para>

    <para>The <literal>PARANOID</literal> hostname checking in
    <application>tcp_wrappers</application> now works as advertised
    (see security advisory FreeBSD-SA-01:56). &merged;</para>

    <para>A local root exploit in &man.sendmail.8; has been closed
    (see security advisory FreeBSD-SA-01:57). &merged;</para>
    
    <para>A remote root vulnerability in &man.lpd.8; has been closed
    (see security advisory FreeBSD-SA-01:58). &merged;</para>

    <para>A race condition in &man.rmuser.8; that briefly exposed a
    world-readable <filename>/etc/master.passwd</filename> has been
    fixed (see security advisory FreeBSD-SA-01:59). &merged;</para>

    <para>A vulnerability in <application>UUCP</application> has been
    closed (see security advisory FreeBSD-SA-01:62).  
    All non-<username>root</username>-owned binaries in standard
    system paths now have the <literal>schg</literal> flag set to
    prevent exploit vectors when run by &man.cron.8;, by
    <username>root</username>, or by a user other then the one owning
    the binary.  In addition, &man.uustat.1; is now run via
    <filename>/etc/periodic/daily/410.status-uucp</filename> as
    <username>uucp</username>, not <username>root</username>.
    In &os; -CURRENT, <application>UUCP</application> has since been moved
    to the Ports Collection and no longer a part of the base
    system. &merged;</para>

    <para>A security hole in the form of a buffer overflow in the
    &man.semop.2; system call has been closed. &merged;</para>

    <para>A security hole in <application>OpenSSH</application>,
    which could allow users to execute code with arbitrary privileges
    if <literal>UseLogin yes</literal> was set, has been
    closed.  Note that the default value of this setting is
    <literal>UseLogin no</literal>.  (See security advisory
    FreeBSD-SA-01:63.) &merged;</para>

    <para>The use of an insecure temporary directory by
    &man.pkg.add.1; could permit a local attacker to modify the
    contents of binary packages while they were being installed.
    This hole has been closed.  (See security advisory
    FreeBSD-SA-02:01.) &merged;</para>

    <para>A race condition in &man.pw.8;, which could expose the
    contents of <filename>/etc/master.passwd</filename>, has been
    eliminated.  (See security advisory FreeBSD-SA-02:02.) &merged;</para>
  </sect2>
  <sect2 id="userland">
    <title>Userland Changes</title>

    <para>If the first argument to &man.ancontrol.8; or
    &man.wicontrol.8; doesn't start with a <literal>-</literal>, it is
    assumed to be an interface.</para>

    <para>&man.apmd.8; now has the ability to monitor battery levels and
    execute commands based on percentage or minutes of battery life
    remaining via the <literal>apm_battery</literal> configuration
    directive.  See the commented-out examples in
    <filename>/etc/apmd.conf</filename> for the syntax. &merged;</para>

    <para>&man.arp.8; now prints the applicable interface name for
    each ARP entry. &merged</para>

    <para>&man.arp.8; now prints <literal>[fddi]</literal> or
    <literal>[atm]</literal> tags for addresses on interfaces of those
    types.</para>

    <para>&man.atacontrol.8; has been added to control various aspects
    of the &man.ata.4; driver.</para>

    <para arch="i386">&man.boot98cfg.8;, a PC-98 boot manager installation and
    configuration utility, has been added. &merged;</para>

    <para>&man.burncd.8; now supports a <option>-m</option> option for
    multisession mode (the default behavior now is to close disks as
    single-session).  A <option>-l</option> option to take a list of
    image files from a filename was also added; <filename>-</filename>
    can be used as a filename for <literal>stdin</literal>. &merged;</para>

    <para>&man.burncd.8; now supports Disk At Once (DAO) mode,
    selectable via the <option>-d</option> flag.</para>

    <para>&man.burncd.8; now has the ability to write VCDs/SVCDs.</para>

    <para>&man.c89.1; has been converted from a shell script to a
    binary executable, fixing some minor bugs. &merged;</para>

    <para>&man.cat.1; now has the ability to read from UNIX-domain
    sockets. &merged;</para>

    <para>&man.cdcontrol.1; now supports a <literal>cdid</literal>
    command, which calculates and displays the CD serial number, using
    the same algorithm used by the CDDB database. &merged;</para>

    <para>&man.cdcontrol.1; now uses the <envar>CDROM</envar>
    environment variable to pick a default device. &merged;</para>

    <para>&man.cdcontrol.1; now supports <literal>next</literal> and
    <literal>prev</literal> commands to skip forwards or backwards a
    specified number of tracks while playing an audio CD. &merged;</para>

    <para>&man.chflags.1; has moved from <filename>/usr/bin</filename>
    to <filename>/bin</filename>.</para>

    <para>&man.chio.1; now has the ability to specify elements by
    volume tag instead of by their physical location as well as the
    ability to return an element to its previous location. &merged;</para>

    <para>&man.chmod.1; now supports a <option>-h</option> for
    changing the mode of a symbolic link.</para>

    <para>&man.chown.8; now correctly follows symbolic links named as
    command line arguments if run without <option>-R</option>.</para>

    <para>&man.chown.8; no longer takes <literal>.</literal> as a
    user/group delimeter.  This change was made to support usernames
    containing a <literal>.</literal>.</para>

    <para>Use of the <literal>CSMG_*</literal> macros no longer
    require inclusion of
    <filename>&lt;sys/param.h&gt;</filename></para>

    <para>&man.col.1; now takes a <option>-p</option> flag to force unknown
    control sequences to be passed through unchanged. &merged;</para>

    <para>The
    <filename>compat3x</filename> distribution has been updated to
    include libraries present in &os; 3.5.1-RELEASE. &merged;</para>

    <para>A <filename>compat4x</filename> distribution has been added
    for compatibility with &os; 4-STABLE.</para>

    <para>&man.config.8; is now better about converting various 
    warnings that should
    have been errors into actual fatal errors with an exit code.  This
    ensures that <literal>make buildkernel</literal> 
    doesn't quietly ignore them and
    build a bogus kernel without a human to read the errors. &merged;</para>

    <para>A number of buffer overflows in &man.config.8; have been
    fixed. &merged;</para>

    <para>The &man.daemon.8; program, a command-line interface to
    &man.daemon.3;, has been added.  It detaches itself from its
    controlling terminal and executes a program specified on the command
    line.  This allows the user to run an arbitrary program as if it were
    written to be a daemon.</para>

    <para>devinfo, a simple tool to print the device tree and resource usage by
    devices, has been added.</para>

    <para>&man.df.1; now takes a <option>-l</option> option to only
    display information about locally-mounted filesystems. &merged;</para>

    <para>&man.disklabel.8; now supports partition sizes expressed in
    kilobytes, megabytes, or gigabytes, in addition to sectors. &merged;</para>

    <para>&man.dmesg.8; now has a <option>-a</option> option to show
    the entire message buffer, including &man.syslogd.8; records and
    <filename>/dev/console</filename> output. &merged;</para>

    <para>&man.du.1; now takes a <option>-I</option> command-line flag
    to ignore/skip files and subdirectories matching a specified
    shell-glob mask. &merged;</para>

    <para>&man.dump.8; now supports inheritance of the
    <literal>nodump</literal> flag down a hierarchy. &merged;</para>

    <para>The <option>-T</option> option to &man.dump.8; no longer swallows
    an extra argument. &merged;</para>

    <para>&man.dump.8; has a new <option>-D</option> option, allowing
    the path to the <filename>/etc/dumpdates</filename> file to be
    changed. &merged;</para>

    <para>&man.edquota.8; now takes a <option>-f</option> option to
    allow limiting the prototype quota distribution (specified with
    <option>-p</option>) to a single filesystem. &merged;</para>

    <para>&man.fbtab.5; now accepts glob matching patterns for target
    devices, not just individual devices and directories.</para>

    <para arch="i386">&man.fdisk.8; no longer attempts to search for
    a device if none has been specified on the command line, but
    instead tries to figure out the default device name from the
    root device.</para>

    <para>&man.fdread.1;, a program to read data from floppy disks,
    has been added.  It is a counterpart to &man.fdwrite.1; and is
    designed to provide a means of recovering at least some data from
    bad media, and to obviate for a complex invocation of
    &man.dd.1;.</para>

    <para>&man.find.1; now takes the <option>-empty</option> flag,
    which returns true if a file or directory is empty. &merged;</para>

    <para>&man.find.1; now takes the <option>-iname</option> and
    <option>-ipath</option> primaries for case-insensitive matches,
    and the <option>-regexp</option> and <option>-iregexp</option>
    primaries for regular-expression matches.  The <option>-E</option>
    flag now enables extended regular expressions. &merged;</para>

    <para>&man.find.1; now has the <option>-anewer</option>,
    <option>-cnewer</option>, <option>-mnewer</option>,
    <option>-okdir</option>, and <option>-newer[acm][acmt]</option>
    primaries for comparisons of file timestamps.  The latter
    primaries can be specified with various units of time. &merged;</para>

    <para>&man.finger.1; now has the ability to support fingering
    aliases, via the &man.finger.conf.5; file. &merged;</para>

    <para>&man.finger.1; now has support for a
    <filename>.pubkey</filename> file.</para>

    <para>&man.fmt.1; has been rewritten; the rewrite fixes a number
    of bugs compared to its prior behavior. &merged;</para>

    <para>&man.fmtcheck.3;, a function for checking consistency of
    format string arguments, has been added. &merged;</para>

    <para>&man.fsck.8; wrappers have been imported; this feature
    provides infrastructure for &man.fsck.8; to work on different
    types of filesystems (analogous to &man.mount.8;).</para>

    <para>The behavior of &man.fsck.8; when dealing with various
    passes (a la <filename>/etc/fstab</filename>) has been modified to
    accommodate multiple-disk filesystems.</para>

    <para>&man.fsck.8; now has support for foreground
    (<option>-F</option>) and background (<option>-B</option>) checks.
    Traditionally, &man.fsck.8; is invoked before the filesystems are
    mounted and all checks are done to completion at that time.  If
    background checking is available, &man.fsck.8; is invoked twice.
    It is first invoked at the traditional time, before the
    filesystems are mounted, with the <option>-F</option> flag to do
    checking on all the filesystems that cannot do background
    checking.  It is then invoked a second time, after the system has
    completed going multiuser, with the <option>-B</option> flag to do
    checking on all the filesystems that can do background checking.
    Unlike the foreground checking, the background checking is started
    asynchronously so that other system activity can proceed even on
    the filesystems that are being checked.  Boot-time enabling of
    this feature is controlled by the
    <varname>background_fsck</varname> option in &man.rc.conf.5;.</para>

    <para>Shortly after the receipt of a <literal>SIGINFO</literal>
    signal (normally control-T from the controlling tty), &man.fsck.ffs.8;
    will now output a line indicating the current phase number and
    progress information relevant to the current phase. &merged;</para>

    <para>&man.fsck.ffs.8; now supports background filesystem checks
    to mounted FFS filesystems with the <option>-B</option> option
    (softupdates must be enabled on these filesystems).  The
    <option>-F</option> flag now determines whether a specified
    filesystem needs foreground checking.</para>

    <para>A new &man.fsck.msdosfs.8; utility has been added to check
    the consistency of MS-DOS filesystems. &merged;</para>

    <para>&man.ftpd.8; now supports a <option>-r</option> flag for
    read-only mode and a <option>-E</option> flag to disable
    <literal>EPSV</literal>.  It also has some fixes to reduce
    information leakage and the ability to specify compile-time port
    ranges. &merged;</para>

    <para>&man.ftpd.8; now supports <option>-o</option> and
    <option>-O</option> options to disable the <literal>RETR</literal>
    command; the former for everybody, and the latter only for guest users.
    Coupled with <option>-A</option> and appropriate file permissions,
    these can be used to create a relatively safe anonymous FTP drop box
    for others to upload to.</para>

    <para arch="i386">&man.gdb.1; now supports hardware watchpoints (using the
    kernel's debug register + support that has been introduced in
    &os; 4.0). &merged;</para>

    <para>The &man.getprogname.3; and &man.setprogname.3; library
    functions have been added to manipulate the name of the current
    program.  They are used by error-reporting routines to produce
    consistent output. &merged;</para>

    <para>&man.gprof.1; now has a <option>-K</option> option to enable
    dynamic symbol resolution from the currently-running kernel.  With
    this change, properly-compiled KLD modules are now able to be
    profiled.</para>

    <para>&man.growfs.8;, a utility for growing FFS filesystems, has
    been added.  &man.ffsinfo.8;, a utility for dump all the
    meta-information of an existing filesystem, has also been
    added. &merged;</para>

    <para>The &man.groups.1; and &man.whoami.1; shell scripts are now
    unnecessary; their functionality has been completely folded into
    &man.id.1;. &merged;</para>

    <para>The &man.ibcs2.8;, &man.linux.8;, &man.osf1.8;, and &man.svr4.8;
    scripts, whose sole purpose was to load emulation
    kernel modules, have been removed.  The kernel module system will
    automatically load them as needed to fulfill dependencies.</para>

    <para>&man.indent.1; has gained some new formatting
    options. &merged;</para>

    <para>&man.ifconfig.8; command can set the link-layer address
    of an interface using the <option>lladdr</option> parameter. 
    &merged;</para>

    <para>&man.ifconfig.8; can now accept addresses in slash/CIDR
    notation. &merged;</para>

    <para>&man.ifconfig.8; now has support for setting parameters for
    IEEE 802.11 wireless network devices.  &man.wi.4; and
    &man.an.4; devices are supported, and partial support is provided
    for &man.awi.4; devices. &merged;</para>

    <para>&man.ifconfig.8; no longer displays the list of supported
    media by default.  Instead it displays it when the
    <option>-m</option> flag is given. &merged;</para>

    <para>The syntax of &man.inetd.8;'s support for &man.faithd.8; is
    now compatible with that of other BSDs. &merged;</para>

    <para>The <literal>ident</literal> protocol support in &man.inetd.8; has
    been cleaned up and updated. &merged;</para>

    <para>&man.inetd.8; now has the ability to manage UNIX-domain
    sockets. &merged;</para>

    <para>&man.install.1; has a number of new features, including the
    <option>-b</option> and <option>-B</option> options for backing up
    existing target files and the <option>-S</option> option for
    <quote>safe</quote> (atomic copy) operation.  The
    <option>-c</option> (copy) flag is now the default, and the
    <option>-D</option> (debugging) flag has been withdrawn.
    &man.install.1; now issues a warning if <option>-d</option>
    (create directories) and <option>-C</option> (copy changed files
    only) are used together. &merged;</para>

    <para>IP Filter is now supported by the
    &man.rc.conf.5; boot-time configuration and
    initialization. &merged;</para>

    <para>&man.ipfstat.8; now supports the <option>-t</option> option
    to turn on a &man.top.1;-like display. &merged;</para>

    <para>&man.ipfw.8; will now avoid the display of dynamic
    firewall rules unless the <option>-d</option> flag is passed to
    it.  The <option>-e</option> option lists expired dynamic
    rules. &merged;</para>

    <para>&man.ipfw.8; has a new feature (<literal>me</literal>) that
    allows for packet matching on interfaces with dynamically-changing
    IP addresses. &merged;</para>

    <para>&man.ipfw.8; has a new <literal>limit</literal> type of
    firewall rule, which limits the number of sessions between address
    pairs. &merged;</para>

    <para>&man.ipfw.8; filter rules can now match on the value of the
    IPv4 precedence field.</para>

    <para>&man.ip6fw.8; now has the ability to use a preprocessor
    and use the <option>-q</option> (quiet) flag when reading from a
    file. &merged;</para>

    <para>&man.kenv.1;, a command to dump the kernel environment, has
    been added. &merged;</para>

    <para>&man.keyinfo.1; is now a C program, rather than a Perl
    script. &merged;</para>

    <para>&man.killall.1; is now a C program, rather than a Perl
    script.  As a result, its <option>-m</option> option now uses the
    regular expression syntax of &man.regex.3;, rather than that of
    &man.perl.1;. &merged;</para>

    <para>&man.killall.1; now allows non-root users to kill SUID root
    processes that they started, the same as the Perl version did.</para>

    <para>The &man.kldconfig.8; utility has been added to make it easier to
    manipulate the kernel module search path. &merged;</para>

    <para>&man.last.1; now implements a <option>-d</option> that
    provides a <quote>snapshot</quote> of who was logged in at a
    particular date and time. &merged;</para>

    <para>The &man.lastlogin.8; utility, which prints the last login
    time of each user, has been imported from
    NetBSD. &merged;</para>

    <para>&man.ldconfig.8; now checks directory ownerships and
    permissions for greater security; these checks can be disabled
    with the <option>-i</option> flag. &merged;</para>

    <para><filename>libc</filename> is now thread-safe by default;
    <filename>libc_r</filename> contains only thread functions.</para>

    <para><filename>libcrypt</filename> and
    <filename>libdescrypt</filename> have been unified to provide a
    configurable password authentication hash library.  Both the md5
    and des hash methods are provided unless the des hash is
    specifically compiled out. &merged;</para>

    <para><filename>libcrypt</filename> now has support for Blowfish
    password hashing. &merged;</para>

    <para arch="i386"><filename>libdisk</filename> can now do
    install-time configuration of the <filename>boot0</filename>
    boot loader. &merged;</para>

    <para><filename>libstand</filename> now has support for
    filesystems containing <application>bzip2</application>-compressed
    files. &merged;</para>

    <para><filename>libstand</filename> now has support for
    overwriting the contents of a file on a UFS filesystem (it cannot
    expand or truncate files because the filesystem may be dirty or
    inconsistent).</para>

    <para>The default TCP port range used by
    <filename>libfetch</filename> for passive FTP retrievals has
    changed; this affects the behavior of &man.fetch.1;, which has
    gained the <option>-U</option> option to restore the old
    behavior. &merged;</para>

    <para><filename>libfetch</filename> now has support for an
    authentication callback. &merged;</para>

    <para><filename>libfetch</filename> now has support for a
    <envar>HTTP_USER_AGENT</envar> environment variable. &merged;</para>

    <para><filename>libgmp</filename> has been superceded by
    <filename>libmp</filename>.

    <para>The functions from <filename>libposix1e</filename> have been 
    integrated into <filename>libc</filename>.</para>

    <para>&man.ln.1; now takes an <option>-i</option> option to
    request user confirmation before overwriting an existing
    file. &merged;</para>

    <para>&man.ln.1; now takes a <option>-h</option> flag to avoid
    following a target that is a link, with a <option>-n</option> flag
    for compatibility with other implementations. &merged;</para>

    <para>&man.logger.1; can now send messages directly to a remote
    syslog. &merged;</para>

    <para>&man.login.1; now exports environment variables set by
    <application>PAM</application> modules. &merged;</para>

    <para>&man.lpc.8; has been improved; <command>lpc clean</command>
    is now somewhat safer, and a new <command>lpc tclean</command>
    command has been added to check to see what files would be removed
    by <command>lpc clean</command>. &merged;</para>

    <para>&man.lpd.8; now takes two new options:  <option>-c</option>
    will log all connection errors to &man.syslogd.8;, while
    <option>-W</option> will allow connections from non-reserved
    ports. &merged;</para>

    <para>&man.lpd.8; now has some support for
    <literal>o</literal>-type print-file actions in its control files,
    which allows printing of PostScript files generated by
    <application>MacOS</application> 10.1. &merged;</para>

    <para>&man.lpr.1;, &man.lpq.1;, and &man.lpd.8; have received a
    few minor enhancements. &merged;</para>

    <para>Catching up with most other network utilities in the base
    system, &man.lpr.1;, &man.lpd.8;, &man.syslogd.8;, and
    &man.logger.1; are now all IPv6-capable. &merged;</para>

    <para><command>lprm -</command> now works for remote printer
    queues. &merged;</para>

    <para>&man.ls.1; can produce colorized listings with the
    <option>-G</option> flag (and appropriate terminal
    support).  The <envar>CLICOLOR</envar> environment variable can be set
    to enable colorized listings by default. &merged;</para>

    <para>&man.mail.1; now takes a <option>-E</option> flag to avoid
    sending messages with empty bodies. &merged;</para>

    <para>&man.make.1; has gained the <literal>:C///</literal>
    (regular expression substitution), <literal>:L</literal>
    (lowercase), and <literal>:U</literal> (uppercase) variable
    modifiers.  These were added to reduce the differences between the
    &os; and
    OpenBSD/NetBSD
    &man.make.1; programs. &merged; </para>

    <para>Bugs in &man.make.1;, among which include broken null suffix
    behavior, bad assumptions about current directory permissions, and
    potential buffer overflows, have been fixed. &merged;</para>

    <para>The new <varname>CPUTYPE</varname>
    <filename>make.conf</filename> variable controls the compilation
    of processor-specific optimizations in various pieces of code such
    as <application>OpenSSL</application>. &merged;</para>

    <para>The &os; <filename>Makefile</filename> infrastructure now
    supports the <varname>WARNS</varname> directive from NetBSD.  This
    directive controls the addition of compiler warning flags to
    <varname>CFLAGS</varname> in a relatively compiler-neutral
    manner. &merged;</para>

    <para>The &man.mdmfs.8; command has been added; it is a wrapper
    around &man.mdconfig.8;, &man.disklabel.8;, &man.newfs.8;, and
    &man.mount.8; that mimics the command line option set of the
    deprecated &man.mount.mfs.8;.</para>

    <para>&man.mergemaster.8; now sources an
    <filename>/etc/mergemaster.rc</filename> file and also prompts the
    user to run recommended commands (such as
    <command>newaliases</command>) as needed. &merged;</para>

    <para>&man.moused.8; now takes a <option>-a</option> option to control
    mouse acceleration. &merged;</para>

    <para>&man.mtree.8; now includes support for a file that lists
    pathnames to be excluded when creating and verifying prototypes.
    This makes it easier to use &man.mtree.8; as a part of an
    intrusion-detection system. &merged;</para>

    <para>The <quote>in use</quote> percentage metric displayed by
    &man.netstat.1; now really reflects the percentage of network
    mbufs used. &merged;</para>

    <para>&man.netstat.1; now has a <option>-W</option> flag that
    tells it not to truncate addresses, even if they're too long for
    the column they're printed in. &merged;</para>

    <para>&man.netstat.1; now keeps track of input and output packets
    on a per-address basis for each interface. &merged;</para>

    <para>&man.netstat.1; now has a <option>-z</option> flag to reset
    statistics. &merged;</para>

    <para>&man.netstat.1; now has a <option>-S</option> flag to print
    address numerically but port names symbolically. &merged;</para>

    <para>&man.newfs.8; now implements write combining, which can make
    creation of new filesystems up to seven times
    faster. &merged;</para>

    <para>&man.newfs.8; now takes a <option>-U</option> option to
    enable softupdates on a new filesystem. &merged;</para>

    <para>The default number of cylinders per group in &man.newfs.8;
    is now computed to be the maximum allowable given the current
    filesystem parameters.  It can be overridden with the
    <option>-c</option> option.  Formerly, the default was fixed at 16.  This
    change leads to better &man.fsck.8; performance and reduced
    fragmentation. &merged;</para>

    <para>The default block and fragment sizes for new filesystems created
    by &man.newfs.8; are now 16384 and 2048 bytes, respectively (the
    old defaults were 8192 and 1024 bytes).  This change generally
    provides increased performance, at the expense of some wasted disk
    space. &merged;</para>

    <para>&man.newsyslog.8; now has the ability to compress
    log files using &man.bzip2.1;. &merged;</para>

    <para><application>NFS</application> now works over IPv6.</para>

    <para>&man.nl.1;, a line numbering filter program, has been
    added. &merged;</para>

    <para><application>nsswitch</application> support has been merged from NetBSD.  By creating
    an &man.nsswitch.conf.5; file, &os; can be configured so that
    various databases such as &man.passwd.5; and &man.group.5; can be
    looked up using flat files, NIS, or Hesiod.  The old
    <filename>hosts.conf</filename> file is no longer used.</para>

    <para><application>PAM</application> support has been added for
    account management and sessions.</para>

    <para>&man.passwd.1; and &man.pw.8; now select the password hash
    algorithm at run time.  See the <literal>passwd_format</literal>
    attribute in <filename>/etc/login.conf</filename>. &merged;</para>

    <para>&man.pax.1; has received a number of enhancements, including
    &man.cpio.1; functionality, &man.tar.1; compatibility
    enhancements, <option>-z</option> and <option>-Z</option> flags
    for &man.gzip.1; and &man.compress.1; functionality, and a number
    of bug fixes.</para>

    <para>&man.pciconf.8; now supports a <option>-v</option> option to
    display the vendor/device information of configured devices,
    in conjunction with the <option>-l</option> option.  The default
    vendor/device database can be found at
    <filename>/usr/share/misc/pci_vendors</filename>. &merged;</para>

    <para>The behavior of &man.periodic.8; is now controlled by
    <filename>/etc/defaults/periodic.conf</filename> and
    <filename>/etc/periodic.conf</filename>. &merged;</para>

    <para>&man.ping.8; now supports a <option>-m</option> option to
    set the TTL of outgoing packets. &merged;</para>

    <para>&man.ping.8; now supports a <option>-A</option> option to
    beep when packets are lost. &merged;</para>

    <para>Userland &man.ppp.8; has received a number of updates and
    bug fixes. &merged;</para>

    <para>&man.ppp.8; has gained the <literal>tcpmssfixup</literal>
    option, which adjusts outgoing and incoming TCP SYN packets so that the maximum
    receive segment size is no larger than allowed by the interface
    MTU. &merged;</para>

    <para>&man.ppp.8; now supports IPv6.</para>

    <para>&man.pppd.8; (the control program for kernel-level PPP) is
    now installed mode <literal>4550</literal> and
    <username>root</username><literal>:</literal><groupname>dialer</groupname>,
    rather than mode <literal>4555</literal> (in other words, it is no
    longer world-executable).  Users of &man.pppd.8; may need to
    change their group settings. &merged;</para>

    <para>&man.pwd.1; can now double as &man.realpath.1;, a program to
    resolve pathnames to their underlying physical paths. &merged;</para>

    <para>The pseudo-random number generator implemented by
    &man.rand.3; has been improved to provide less biased results.</para>

    <para>&man.rc.8; now has an framework for handling dependencies between
    &man.rc.conf.5; variables. &merged;</para>

    <para>&man.rc.8; now deletes all non-directory files in
    <filename>/var/run</filename> and
    <filename>/var/spool/lock</filename> at boot time. &merged;</para>

    <para>&man.rcmd.3; now supports the use of the
    <envar>RSH</envar> environment variable to specify a program to
    use other than &man.rsh.1; for remote execution.  As a result,
    programs such as &man.dump.8;, can use &man.ssh.1; for remote
    transport.</para>

    <para>&man.rdist.1; has been retired from the base system, but is still
    available from &os; Ports Collection as 
    <port>net/44bsd-rdist</port>.</para>

    <para>The &man.resolver.3; in &os; now implements EDNS0 support,
    which will be necessary when working with IPv6 transport-ready
    resolvers/DNS servers. &merged;</para>

    <para>The &man.rfork.thread.3; library call has been added as a
    helper function to &man.rfork.2;.  Using this function should
    avoid the need to implement complex stack swap
    code. &merged;</para>

    <para>The <option>-v</option> option to &man.rm.1; now displays
    the entire pathname of a file being removed.</para>

    <para>&man.route.8; is now more verbose when changing indirect
    routes, in the case of a gateway route that is the same route as
    the one being modified. &merged;</para>

    <para>&man.route.8; now uses
    <literal><replaceable>host</replaceable>/<replaceable>bits</replaceable></literal>
    syntax instead of 
    <literal><replaceable>net</replaceable>/<replaceable>bits</replaceable></literal>
    syntax, for compatibility with &man.netstat.1;. &merged;</para>

    <para>&man.route.8; can now create <quote>proxy only</quote>
    published ARP entries. &merged;</para>

    <para>The &man.route.8; <option>add</option> command now supports
    the <option>-ifp</option> and <option>-ifa</option>
    modifiers. &merged;</para>

    <para>&man.rpcbind.8; has replaced &man.portmap.8;.</para>

    <para>&man.rpcgen.1; now uses <filename>/usr/bin/cpp</filename>
    (as on NetBSD), not <filename>/usr/libexec/cpp</filename>.</para>

    <para>&man.rpc.lockd.8; has been imported from NetBSD.  This
    daemon enables locking on NFS filesystems.</para>

    <para>The performance of the ELF dynamic linker &man.rtld.1; has
    been improved. &merged;</para>

    <para>RSA Security has waived all patent rights to the <application>RSA</application>
    algorithm.  As a
    result, the native <application>OpenSSL</application>
    implementation of the RSA algorithm is now activated by default,
    and the <port>security/rsaref</port> port and the
    <filename>librsaUSA</filename> and <filename>librsaINTL</filename>
    libraries are
    no longer required for USA and non-USA residents respectively. &merged;</para>

    <para>&man.savecore.8; now supports a <option>-k</option> option
    to prevent clearing a crash dump after saving it.  It also
    attempts to avoid writing large stretches of zeros to crash dump
    files to save space and time. &merged;</para>

    <para>&man.savecore.8; now works correctly on machines with 2 GB
    or more of RAM. &merged;</para>

    <para>&man.sed.1; now takes a <option>-E</option> option for
    extended regular expression support. &merged;</para>

    <para>&man.send-pr.1; now takes a <option>-a</option> option to
    include a file into the <literal>Fix:</literal> section of a
    problem report. &merged;</para>

    <para>The &man.setfacl.1; and &man.getfacl.1; commands have been
    added to manage file system Access Control Lists.</para>

    <para>&man.setproctitle.3; has been moved from
    <filename>libutil</filename> to
    <filename>libc</filename>. &merged;</para>

    <para>&man.sh.1; now implements <command>test</command> as a
    built-in command for improved efficiency. &merged;</para>

    <para>&man.sh.1; no longer
    implements <command>printf</command> as a built-in command because
    it was considered less valuable compared to the other built-in
    commands (this functionality is, of course, still available
    through the &man.printf.1; executable).</para>

    <para>&man.sockstat.1; now has <option>-c</option> and
    <option>-l</option> flags for listing connected and listening
    sockets, respectively. &merged;</para>

    <para>&man.split.1; now has the ability to split a file longer
    than 2GB. &merged;</para>

    <para>In preparation for meeting SUSv2/POSIX
    <filename>&lt;sys/select.h&gt;</filename> requirements,
    <literal>struct selinfo</literal> and related functions have been
    moved to <filename>&lt;sys/selinfo.h&gt;</filename>.</para>

    <para>The &man.strnstr.3; and &man.strcasestr.3; variants of
    &man.strstr.3; have been implemented.</para>

    <para>&man.stty.1; now has support for an
    <literal>erase2</literal> control character, so that, for example,
    both the <keycap>Delete</keycap> and <keycap>Backspace</keycap>
    keys can be used to erase characters. &merged;</para>

    <para>&man.style.perl.7;, a style guide for Perl code in the &os;
    base system, has been added.</para>

    <para>&man.su.1; now uses <application>PAM</application> for
    authentication.</para>

    <para>Boot-time &man.syscons.4; configuration was moved to a
    machine-independent <filename>/etc/rc.syscons</filename>. &merged;</para>

    <para>&man.sysctl.8; now supports a <option>-N</option> option to
    print out variable names only. &merged;</para>

    <para>&man.sysctl.8; has replaced the <option>-A</option> and
    <option>-X</option> options with <option>-ao</option> and
    <option>-ax</option> respectively; the former options are now
    deprecated.  The <option>-w</option> option is deprecated as well; it is
    not needed to determine the user's intentions. &merged;</para>

    <para>&man.sysctl.8; now supports a <option>-e</option> option to
    separate variable names and values by <literal>=</literal> rather
    than <literal>:</literal>.  This feature is useful for producing
    output that can be fed back to &man.sysctl.8;. &merged;</para>

    <para>&man.sysinstall.8; now properly preserves
    <filename>/etc/mail</filename> during a binary upgrade. &merged;</para>

    <para>&man.sysinstall.8; now uses some more intuitive defaults
    thanks to some new dialog support functions. &merged;</para>

    <para>The default root partition in &man.sysinstall.8; is now
    100MB on the i386 and 120MB on the Alpha.</para>

    <para>&man.sysinstall.8; now lives in <filename>/usr/sbin</filename>,
    which simplifies the installation process.  The &man.sysinstall.8;
    manpage is also installed in a more consistent fashion now.</para>

    <para>&man.sysinstall.8; now has the ability to load KLDs as a
    part of the installation. &merged;</para>

    <para>&man.sysinstall.8; now enables Soft Updates by default on
    all filesystems it creates, except for the root
    filesystem. &merged;</para>

    <para>&man.sysinstall.8; has received updates for its
    <quote>auto</quote> partitioning mode which provide more
    reasonable defaults for the sizes of partitions that are created;
    auto-sized partitions can now also recover the space that becomes
    available when other partitions are deleted.</para>

    <para>&man.syslogd.8; can take a <option>-n</option> option to
    disable DNS queries for every request. &merged;</para>

    <para>&man.syslogd.8; now supports a <literal>LOG_CONSOLE</literal>
    facility (disabled by
    default), which can be used to log <filename>/dev/console</filename> 
    output. &merged;</para>

    <para>&man.syslogd.8; now has the ability to bind to a specific
    address (as opposed to using every available one) via the
    <option>-b</option> option. &merged;</para>

    <para>&man.tail.1; now has the ability to work on files longer
    than 2GB. &merged;</para>

    <para>&man.tar.1; now supports the <varname>TAR_RSH</varname>
    variable, principally to enable the use of &man.ssh.1; as a
    transport. &merged;</para>

    <para>&man.telnet.1; now does autologin and encryption by default;
    a new <option>-y</option> option turns off encryption.</para>

    <para>&man.telnet.1; now supports a <option>-u</option> flag to
    allow connections to UNIX-domain (<literal>AF_UNIX</literal>)
    sockets. &merged;</para>

    <para>&man.tftpd.8; now takes the <option>-c</option> and
    <option>-C</option> options, which allow the server to
    &man.chroot.2; based on the IP address of the connecting client.
    &man.tftp.1; and &man.tftpd.8; can now transfer files larger than
    65535 blocks. &merged;</para>

    <para>&man.tftpd.8; now supports RFC 2349 (TFTP Timeout Interval
    and Transfer Size Options); this feature is required by some
    firmware like EFI boot managers (at least on HP i2000 Itanium
    servers) in order to boot an image using
    <application>TFTP</application>.</para>

    <para arch="alpha">&man.timed.8; now works on the alpha.</para>

    <para>A version of Transport Independent RPC
    (<application>TI-RPC</application>) has been imported.</para>

    <para>&man.tmpnam.3; will now use the <envar>TMPDIR</envar>
    environment variable, if set, to specify the location of temporary
    files. &merged;</para>

    <para>&man.tip.1; has been updated from
    <application>OpenBSD</application>, and has the ability to act as
    a &man.cu.1; substitute.</para>

    <para>&man.top.1; will now use the full width of its tty.</para>

    <para>&man.touch.1; now takes a <option>-h</option> option to
    operate on a symbolic link, rather than what the link points
    to.</para>

    <para>The &man.truncate.1; utility, which truncates or extends the length
    of files, has been added. &merged;</para>

    <para>Ukrainian language support has been added to the &os;
    console. &merged;</para>

    <para><application>UUCP</application> has been removed from the
    base system.  It can be found in
    the Ports Collection, in <port>net/freebsd-uucp</port>.</para>

    <para>&man.units.1; has received some updates and bugfixes. &merged;</para>

    <para>&man.vidcontrol.1; now accepts a <option>-g</option>
    parameter to select custom text geometry in the
    <literal>VESA_800x600</literal> raster text mode. &merged;</para>

    <para>&man.vidcontrol.1; now allows the user to omit the font size
    specification when loading a font, and has some better
    error-handling. &merged;</para>

    <para>&man.vidcontrol.1; now supports a <option>-p</option> option to
    take a snapshot of a &man.syscons.4; video buffer.  These
    snapshots can be manipulated by the
    <port>graphics/scr2png</port> utility in the Ports
    Collection. &merged;</para>

    <para>&man.vidcontrol.1; now supports a <option>-C</option> option
    to clear the history buffer for a given tty, as well as a
    <option>-h</option> option to set the size of the history buffer. &merged;</para>

    <para>The default stripe size in &man.vinum.8; has been changed
    from 256KB to 279KB, to spread out superblocks more evenly between
    stripes.</para>

    <para>&man.wall.1; now supports a <option>-g</option> flag to
    write a message to all users of a given group. &merged;</para>

    <para>&man.watch.8; now takes a <option>-f</option> option to
    specify a &man.snp.4; device to use.</para>

    <para>&man.which.1; is now a C program, rather than a Perl
    script.</para>

    <para>&man.whois.1; now directs queries for IP addresses to
    ARIN.  If a query to ARIN references APNIC or RIPE, the
    appropriate server will also be queried, provided that the
    <option>-Q</option> option is not specified. &merged;</para>

    <para>&man.whois.1; supports a <option>-c</option> option to
    specify a country code to help direct queries towards a particular
    whois server. &merged;</para>

    <para>&man.xargs.1; now supports a <option>-J</option>
    <replaceable>replstr</replaceable> option that allows the user to
    tell &man.xargs.1; to insert the data read from standard input at
    a specific point in the command line arguments rather than at the
    end. &merged;</para>

    <para>The compiler chain now uses the FSF-supplied C/C++ runtime
    initialization code.  This change brings about better
    compatibility with code generated from the various egcs and gcc
    ports, as well as the stock public FSF source. &merged;</para>

    <para>The threads library has gained some signal handling changes,
    bug fixes, and performance enhancements (including zero system
    call thread switching).  &man.gdb.1; thread support has been
    updated to match these changes. &merged;</para>

    <para>Significant additions have been made to internationalization
    support; &os; now has complete locale support for the
    <literal>LC_MONETARY</literal>, <literal>LC_NUMERIC</literal>, and
    <literal>LC_MESSAGES</literal> categories.  A number of
    applications have been updated to take advantage of this
    support.</para>

    <para>Locale names have been changed to improve compatibility with
    the names used by X11R6, as well as a number of other UNIX
    versions.  As an example, the <literal>en_US.ISO_8859-1</literal>
    locale name has been changed to
    <literal>en_US.ISO8859-1</literal>.  Entries in
    <filename>/etc/locale.alias</filename> provide backward
    compatibility. &merged;</para>

    <para><filename>/usr/src/share/examples/BSD_daemon/</filename> now
    contains a scalable Beastie graphic. &merged;</para>

    <para>As part of an ongoing process, many manual pages were
    improved, both in terms of their formatting markup and in their
    content. &merged;</para>

    <sect3>
      <title>Contributed Software</title>

      <para><application>am-utils</application> has been updated to 
      6.0.7.</para>

      <para><application>bc</application> has been updated from 1.04 to
      1.06. &merged;</para>

      <para>The ISC library from the <application>BIND</application>
      distribution is now built as
      <filename>libisc</filename>. &merged;</para>

      <para><application>BIND</application> is now built with the
      <literal>NOADDITIONAL</literal> flag, which causes &man.named.8;
      to operate in a more consistent fashion for certain common
      misconfigurations. &merged;</para>

      <para><application>BIND</application> has been updated to
      8.2.4-REL. &merged;</para>

      <para><application>Binutils</application> have been updated to
      a 31 October 2001 snapshot from the FSF 2.11 branch.</para>

      <para><application>bzip2</application> 1.0.1 has been imported; this
      brings the &man.bzip2.1; program and the <filename>libbz2</filename>
      library to the base system. &merged;</para>

      <para>The &man.ee.1; <application>Easy Editor</application> has
      been updated to 1.4.2. &merged;</para>

      <para><application>file</application> has been updated to 3.37.</para>

      <para><application>gcc</application> has been updated to 2.95.3. &merged;</para>

      <para>&man.gcc.1; now uses a unified <filename>libgcc</filename>
      rather than a separate one for threaded and non-threaded programs.
      <filename>/usr/lib/libgcc_r.a</filename> can be removed.
      &merged;</para>

      <para>&man.gcc.1; now supports the environment variable
      <envar>GCC_OPTIONS</envar>, which can hold a set of default
      options for <application>GCC</application>. &merged;</para>

      <para><application>GNATS</application> has been updated to
      3.113. &merged;</para>
      
      <para><application>GNU awk</application> has been updated to
      3.1.0.</para>

      <para><application>gperf</application> has been updated to 2.7.2.</para>

      <para><application>groff</application> and its related utilities
      have been updated to FSF version 1.17.2.  This import brings in a
      new &man.mdoc.7; macro package (sometimes referred to as
      <literal>mdocNG</literal>), which removes many of the
      limitations of its predecessor. &merged;</para>

      <para><application>Heimdal</application> has been updated to
      0.3f.</para>

      <para>The version of <application>IPFilter</application>
      provided with &os; now includes the &man.ipfs.8; program, which
      allows state information created for NAT entries and stateful
      rules to be saved to disk and restored after a reboot. 
      Boot-time configuration of these features is supported by
      &man.rc.conf.5;. &merged;</para>

      <para>The <application>ISC DHCP</application> client has been
      updated to 2.0pl5. &merged;</para>

      <para><application>Kerberos IV</application> has been updated to
      1.0.5. &merged;</para>

      <para>The &man.more.1; command has been replaced by &man.less.1;,
      although it can still be run as
      <command>more</command>.  <application>less</application> has
      been imported at 3.5.8. &merged;</para>

      <para><application>libpcap</application> has been updated to
      0.6.2. &merged;</para>

      <para><application>libreadline</application> has been updated to
      4.2.</para>

      <para><application>Linux-PAM</application> has been updated to
      0.75. &merged;</para>

      <para>A number of new <application>Linux-PAM</application> modules
      have been added, including:  <filename>pam_ftp</filename>,
      <filename>pam_krb5</filename>,
      <filename>pam_nologin</filename>,
      <filename>pam_rootok</filename>,
      <filename>pam_securetty</filename>,
      <filename>pam_wheel</filename>.</para>

      <para><application>lukemftp</application> has replaced the &os;
      &man.ftp.1; program.  Among its new features are more automation
      methods, better standards compliance, transfer rate throttling,
      and a customizable command-line prompt.  Some environment
      variables and command-line arguments have changed.</para>

      <para><application>ncurses</application> has been updated to
      5.2-20010512.</para>

      <para>The <application>NTP</application> suite of programs has been
      updated to 4.1.0. &merged;</para>

      <para>The <application>OPIE</application> one-time-password suite
      has been updated to 2.32. &merged;  It has completely replaced
      the functionality of <application>S/Key</application>.</para>

      <para><application>Perl</application> has been updated to version
      5.6.0.</para>

      <para>&man.routed.8; has been updated to version 2.22. &merged;</para>

      <para arch="i386">Version 1.4.3 of the <application>smbfs</application>
      userland utilities have been imported. &merged;</para>

      <para><application>tcpdump</application> has been updated to
      3.6.3. &merged;</para>

      <para>The &man.csh.1; shell has been replaced by &man.tcsh.1;,
      although it can still be run as <command>csh</command>.
      <application>tcsh</application> has been updated to version
      6.11. &merged;</para>

      <para>&man.traceroute.8; now takes its default maximum TTL value
      from the <varname>net.inet.ip.ttl</varname> sysctl
      variable. &merged;</para>

      <para>The timezone database has been updated to the
      <filename>tzdata2001d</filename> release. &merged;</para>

      <sect4>
        <title>CVS</title>

        <para><application>cvs</application> has been updated to
        1.11.1p1. &merged;</para>

        <para>The default value for &man.cvs.1;'s
        <envar>CVS_RSH</envar> variable is now <literal>ssh</literal>,
        rather than <literal>rsh</literal>. &merged;</para>

        <para>&man.cvs.1; now supports a <option>-T</option> option to
        update a sandbox's <filename>CVS/Template</filename> file from
        the repository. &merged;</para>

	<para>&man.cvs.1; <literal>diff</literal> now supports the
	<option>-j</option> option to perform differences against a
	revision relative to a branch tag. &merged;</para>
      </sect4>

      <sect4>
	<title>CVSup</title>

	<para><application>CVSup</application>, a frequently used
	utility in the &os; Ports Collection, was formerly installable
	using several ports and packages.  The
	<port>net/cvsup-bin</port> and <port>net/cvsupd-bin</port>
	ports/packages are no longer necessary or available; the
	<port>net/cvsup</port> port should be used instead. &merged;</para>

	<para><application>CVSup</application> has been updated to
	16.1_3, which is available in the &os; Ports Collection as
	<port>net/cvsup</port>.  This update fixes a long-standing
	(but only recently encountered) bug which affects the
	timestamps on all files after Sun Sep 9 01:46:40 UTC 2001
	(1,000,000,000 seconds after the UNIX epoch). &merged;</para>
      </sect4>

      <sect4 id="kame-userland">
        <title>KAME</title>

        <para>The IPv6 stack is now based on a snapshot based on the KAME
	Project's IPv6 snapshot as of 28 May, 2001.  Most of the
	items listed in this section are a result of this import.
	<xref linkend="kame-kernel"> lists kernel updates to the KAME
	IPv6 stack. &merged;</para>

	<para>&man.faithd.8; now supports a configuration file for
	access control. &merged;</para>

	<para>&man.ifconfig.8; can now perform the functions of
	&man.gifconfig.8;. &merged;</para>

	<para>&man.ifconfig.8; can now perform the functions of
	&man.prefix.8;.  &man.prefix.8; is now a shell script for
	partial backwards compatibility. &merged;</para>

	<para>&man.ndp.8; now implements garbage collection for stale
	NDP entries, as described in RFC 2461 (Neighbor Discovery for
	IP Version 6 (IPv6)). &merged;</para>

        <para>&man.pim6dd.8; and &man.pim6sd.8; have been removed due to
        restrictive licensing conditions.  These programs are available
        in the ports collection as <port>net/pim6dd</port> and
        <port>net/pim6sd</port>. &merged;</para>

	<para>&man.route6d.8; now supports an <option>-n</option> flag
	to avoid updating the kernel forwarding table. &merged;</para>

	<para>The <option>-R</option> (router renumbering) option to
	&man.rtadvd.8; is currently ignored. &merged;</para>
      </sect4>

      <sect4>
        <title>OpenSSH</title>

	<para><application>OpenSSH</application> has been updated to
	2.9, which provides support for the SSH2 protocol (now the
	default) and DSA keys.  &man.ssh-add.1; and &man.ssh-agent.1;
	can now handle DSA keys, with support for authentication
	forwarding.  <application>OpenSSH</application> users in the
	USA no longer need to rely on the restrictively-licensed
	RSAREF toolkit which is required to handle RSA keys.  Among
	other new features: A client and server for sftp has been
	added.  &man.scp.1; can now handle files larger than 2 GBytes.
	A limit on the number of outstanding, unauthenticated 
	connections in &man.sshd.8; has been added.  Support has been
	added for the Rijndael encryption algorithm.  Rekeying of
	existing sessions is now supported, and an experimental
	<application>SOCKS4</application> proxy has been added to
	&man.ssh.1;.</para>

	<para><application>OpenSSH</application> can now authenticate
	using OPIE passwords in SSH1 mode.  Support is not yet available
	in SSH2 mode. &merged;</para>

        <para><application>PAM</application> support for
        <application>OpenSSH</application> has been added.</para>

	<para>A long-standing bug in <application>OpenSSH</application>,
	which sometimes resulted in a dropped session when an
	X11-forwarded client was closed, was fixed.</para>

	<para><application>Kerberos</application> compatibility has been
	added to <application>OpenSSH</application>. &merged;</para>

	<para><application>OpenSSH</application> has been modified to be
	more resistant to traffic analysis by requiring that
	<quote>non-echoed</quote> characters are still echoed back in a
	null packet, as well as by padding passwords sent so as not to
	hint at password lengths. &merged;</para>

        <para>&man.sshd.8; is now enabled by default on new
        installs. &merged;</para>

        <para>&man.sshd.8; <literal>X11Forwarding</literal> is now turned
        on by default on the server (any risk is to the client, where it
        is already disabled by default). &merged;</para>

	<para>In <filename>/etc/ssh/sshd_config</filename>, the
	<literal>ConnectionsPerPeriod</literal> parameter has been
	deprecated in favor of <literal>MaxStartups</literal>. &merged;</para>

	<para><application>OpenSSH</application> now has a
	<literal>VersionAddendum</literal> configuration setting for
	&man.sshd.8; to allow changing the part of the
	<application>OpenSSH</application> version string after the
	main version number.</para>
      </sect4>

      <sect4>
        <title>OpenSSL</title>

	<para><application>OpenSSL</application> has been updated to
	0.9.6b.</para>

	<para><application>OpenSSL</application> now has support for
	machine-dependent ASM optimizations, activated by the new
	<varname>MACHINE_CPU</varname> and/or <varname>CPUTYPE</varname>
	<filename>make.conf</filename> variables. &merged;</para>
      </sect4>

      <sect4>
	<title>sendmail</title>

	<para><application>sendmail</application> has been updated from
	version 8.9.3 to version 8.11.6.  Important changes include: new
	default file locations (see
	<filename>/usr/src/contrib/sendmail/cf/README</filename>);
	&man.newaliases.1; is limited to <username>root</username> and
	trusted users; STARTTLS encryption; and the MSA port (587) is
	turned on by default.  See
	<filename>/usr/src/contrib/sendmail/RELEASE_NOTES</filename> for
	more information. &merged;</para>

	<para>&man.mail.local.8; is no longer installed as a SUID binary.
	If you are using a <filename>/etc/mail/sendmail.cf</filename> from
	the default <filename>sendmail.cf</filename> included with &os;
	any time after 3.1.0, you are fine.  If you are using a
	hand-configured <filename>sendmail.cf</filename> and
	<command>mail.local</command> for delivery, check to make sure the
	<literal>F=S</literal> flag is set on the
	<literal>Mlocal</literal> line.  Those with
	<filename>.mc</filename> files who need to add the flag can do so
	by adding the following line to their <filename>.mc</filename>
	file and regenerating the <filename>sendmail.cf</filename>
	file:</para>

	<programlisting>MODIFY_MAILER_FLAGS(`LOCAL',`+S')dnl</programlisting>

	<para>Note that <literal>FEATURE(`local_lmtp')</literal> already
	does this. &merged;</para>

	<para>The default <filename>/etc/mail/sendmail.cf</filename>
	disables the SMTP <literal>EXPN</literal> and
	<literal>VRFY</literal> commands. &merged;</para>

	<para>&man.vacation.1; has been updated to use the version included with
	<application>sendmail</application>. &merged;</para>

	<para>The <application>sendmail</application> configuration
	building tools are installed in
	<filename>/usr/share/sendmail/cf/</filename>. &merged;</para>

	<para>New <filename>make.conf</filename> options:
	<varname>SENDMAIL_MC</varname> and
	<varname>SENDMAIL_ADDITIONAL_MC</varname>.  See
	<filename>/usr/share/examples/etc/make.conf</filename> for more
	information. &merged;</para>

	<para><filename>/etc/mail/Makefile</filename> now supports: the
	new <varname>SENDMAIL_MC</varname> <filename>make.conf</filename>
	option; the ability to build <filename>.cf</filename> files from
	<filename>.mc</filename> files; generalized map rebuilding;
	rebuilding the aliases file; and the ability to stop, start, and
	restart <application>sendmail</application>. &merged;</para>
      </sect4>
    </sect3>

    <sect3>
      <title>Ports/Packages Collection</title>

      <para><application>BSDPAN</application>, a collection of modules
      that provides tighter integration of
      <application>Perl</application> into the &os; Ports
      Collection, has been added.</para>

      <para>&man.pkg.create.1; and &man.pkg.add.1; can now work with
      packages that have been compressed using
      &man.bzip2.1;. &man.pkg.add.1; will use the PACKAGEROOT
      environment variable to determine a mirror site for new
      packages. &merged;</para>

      <para>&man.pkg.create.1; now records dependencies in dependency
      order rather than in the order specified on the command line.
      This improves the functioning of <command>pkg_add
      -r</command>. &merged;</para>

      <para>&man.pkg.create.1; now supports a <option>-b</option> to
      create a package file from a locally-installed
      package. &merged;</para>

      <para>When requested to delete multiple packages,
      &man.pkg.delete.1; will now attempt to remove them in dependency
      order rather than the order specified on the command
      line. &merged;</para>

      <para>&man.pkg.delete.1; now can perform glob/regexp matching of
      package names.  In addition, it supports a <option>-a</option>
      option for removing all packages and a <option>-i</option> option
      for &man.rm.1;-style interactive confirmation. &merged;</para>

      <para>&man.pkg.delete.1; now supports a <option>-r</option>
      option for recursive package removal. &merged;</para>

      <para>&man.pkg.info.1; now supports globbing against names of
      installed packages.  The <option>-G</option> option disables this
      behavior, and the <option>-x</option> option causes regular
      expression matching instead of shell globbing. &merged;</para>

      <para>&man.pkg.info.1; can now accept a <option>-g</option> flag for
      verifying an installed package against its recorded checksums (to
      see if it's been modified post-installation).  Naturally, this
      mechanism is only as secure as the contents of
      <filename>/var/db/pkg</filename> if it's to be used for auditing
      purposes. &merged;</para>

      <para>&man.pkg.sign.1; and &man.pkg.check.1; have been added to
      digitally sign and verify the signatures on binary package
      files. &merged;</para>

      <para>&man.pkg.update.1;, a utility to update installed packages
      and update their dependencies, has been added. &merged;</para>

      <para>&man.pkg.version.1; now has a version number comparison
      routine that corresponds to the Porters Handbook.  It also has a
      <option>-t</option> option for testing address comparisons. 
      &merged;</para>

      <para>&man.pkg.version.1; now takes a <option>-s</option> flag
      to limit its operation to ports/packages matching a given
      string. &merged;</para>

      <para>Version numbers of installed packages have a new
      (backward-compatible) syntax, which supports the
      <varname>PORTREVISION</varname> and <varname>PORTEPOCH</varname>
      variables in Ports Collection <filename>Makefile</filename>s.
      These changes help keep track of changes in the ports collection
      entries such as security patches or &os;-specific updates, which
      aren't reflected in the original, third-party software
      distributions.  &man.pkg.version.1; can now compare these
      new-style version numbers. &merged;</para>

      <para>To improve performance and disk utilization, the <quote>ports
      skeletons</quote> in the &os; Ports Collection have been restructured.
      Installed ports and packages should not be affected. &merged;</para>

      <para>All packages and ports now contain an <quote>origin</quote>
      directive, which makes it easier for programs such as
      &man.pkg.version.1; to determine the directory from which a
      package was built. &merged;</para>
    </sect3>
  </sect2>
</sect1>

<sect1>
  <title>Upgrading from previous releases of &os;</title>

  <para>If you're upgrading from a previous release of &os;, you
  generally will have three options:

    <itemizedlist>
      <listitem>
	<para>Using the binary upgrade option of &man.sysinstall.8;.
	  This option is perhaps the quickest, although it presumes
	  that your installation of &os; uses no special compilation
	  options.</para>
      </listitem>
      <listitem>
	<para>Performing a complete reinstall of &os;.  Technically,
	  this is not an upgrading method, and in any case is usually less
	  convenient than a binary upgrade, in that it requires you to
	  manually backup and restore the contents of
	  <filename>/etc</filename>.  However, it may be useful in
	  cases where you want (or need) to change the partitioning of
	  your disks.
      </listitem>
      <listitem>
	<para>From source code in <filename>/usr/src</filename>.  This
	  route is more flexible, but requires more disk space, time,
	  and more technical expertise.  Upgrading from very old
	  versions of &os; may be problematic; in cases like this, it
	  is usually more effective to perform a binary upgrade or a
	  complete reinstall.</para>
      </listitem>
    </itemizedlist>
  </para>

  <para>Please read the <filename>INSTALL.TXT</filename> file for more
  information, preferably <emphasis>before</emphasis> beginning an
  upgrade.  If you are upgrading from source, please be sure to read
  <filename>/usr/src/UPDATING</filename> as well.</para>

  <para>Finally, if you want to use one of various means to track the
  -STABLE or -CURRENT branches of &os;, please be sure to consult the
  <ulink
  url="http://www.FreeBSD.org/handbook/current-stable.html"><quote>-CURRENT
  vs. -STABLE</quote></ulink> section of the <ulink
  url="http://www.FreeBSD.org/handbook/">FreeBSD
  Handbook</ulink>.</para>

  <important>
    <para>Upgrading &os; should, of course, only be attempted after
    backing up <emphasis>all</emphasis> data and configuration
    files.</para>
  </important>
</sect1>