path: root/release/doc/en_US.ISO8859-1/relnotes/article.sgml

<!DOCTYPE article PUBLIC "-//FreeBSD//DTD DocBook V4.1-Based Extension//EN" [
<!ENTITY % articles.ent PUBLIC "-//FreeBSD//ENTITIES DocBook FreeBSD Articles Entity Set//EN">
%articles.ent;

<!ENTITY % release PUBLIC "-//FreeBSD//ENTITIES Release Specification//EN">
%release;

<!-- Text constants which probably don't need to be changed.-->

<!-- The marker for MFCs. -->
<!ENTITY merged "[MERGED]">

<!ENTITY % include.historic "IGNORE">
<!ENTITY % no.include.historic "IGNORE">
]>

<article>
<articleinfo>
  <title>&os; &release.current; Release Notes</title>

  <corpauthor>The &os; Project</corpauthor>

  <pubdate>$FreeBSD$</pubdate>

  <copyright>
    <year>2000</year>
    <year>2001</year>
    <year>2002</year>
    <year>2003</year>
    <year>2004</year>
    <year>2005</year>
    <year>2006</year>
    <year>2007</year>
    <holder role="mailto:doc@FreeBSD.org">The &os; Documentation Project</holder>
  </copyright>

  <legalnotice id="trademarks" role="trademarks">
    &tm-attrib.freebsd;
    &tm-attrib.ibm;
    &tm-attrib.ieee;
    &tm-attrib.intel;
    &tm-attrib.sparc;
    &tm-attrib.general;
  </legalnotice>

  <abstract>
    <para>The release notes for &os; &release.current; contain a summary
      of the changes made to the &os; base system on the
      &release.branch; development line.
      This document lists applicable security advisories that were issued since
      the last release, as well as significant changes to the &os;
      kernel and userland.
      Some brief remarks on upgrading are also presented.</para>
  </abstract>
</articleinfo>

<sect1 id="intro">
  <title>Introduction</title>

  <para>This document contains the release notes for &os;
    &release.current;.  It
    describes recently added, changed, or deleted features of &os;.
    It also provides some notes on upgrading
    from previous versions of &os;.</para>

<![ %release.type.current [

  <para>The &release.type; distribution to which these release notes
    apply represents the latest point along the &release.branch; development
    branch since &release.branch; was created.  Information regarding pre-built, binary
    &release.type; distributions along this branch
    can be found at <ulink url="&release.url;"></ulink>.</para>

]]>

<![ %release.type.snapshot [

  <para>The &release.type; distribution to which these release notes
    apply represents a point along the &release.branch; development
    branch between &release.prev; and the future &release.next;.
    Information regarding
    pre-built, binary &release.type; distributions along this branch
    can be found at <ulink url="&release.url;"></ulink>.</para>

]]>

<![ %release.type.release [

  <para>This distribution of &os; &release.current; is a
    &release.type; distribution.  It can be found at <ulink
    url="&release.url;"></ulink> or any of its mirrors.  More
    information on obtaining this (or other) &release.type;
    distributions of &os; can be found in the <ulink
    url="&url.books.handbook;/mirrors.html"><quote>Obtaining
    &os;</quote> appendix</ulink> to the <ulink
    url="&url.books.handbook;/">&os;
    Handbook</ulink>.</para>

]]>

  <para>All users are encouraged to consult the release errata before
    installing &os;.  The errata document is updated with
    <quote>late-breaking</quote> information discovered late in the
    release cycle or after the release.  Typically, it contains
    information on known bugs, security advisories, and corrections to
    documentation.  An up-to-date copy of the errata for &os;
    &release.current; can be found on the &os; Web site.</para>

</sect1>

<sect1 id="new">
  <title>What's New</title>

  <para>This section describes
    the most user-visible new or changed features in &os;
    since &release.prev;.
    In general, changes described here are unique to the &release.branch;
    branch unless specifically marked as &merged; features.
  </para>

  <para>Typical release note items
    document recent security advisories issued after
    &release.prev;,
    new drivers or hardware support, new commands or options,
    major bug fixes, or contributed software upgrades.  They may also
    list changes to major ports/packages or release engineering
    practices.  Clearly the release notes cannot list every single
    change made to &os; between releases; this document focuses
    primarily on security advisories, user-visible changes, and major
    architectural improvements.</para>

  <sect2 id="security">
    <title>Security Advisories</title>

    <para>A temporary file vulnerability in &man.texindex.1;, which
      could allow a local attacker to overwrite files in the context
      of a user running the &man.texindex.1; utility, has been fixed.
      For more details see security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:01.texindex.asc">FreeBSD-SA-06:01.texindex</ulink>. &merged;</para>

    <para>A temporary file vulnerability in the &man.ee.1; text
      editor, which could allow a local attacker to overwrite files in
      the context of a user running &man.ee.1;, has been fixed.  For
      more details see security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:02.ee.asc">FreeBSD-SA-06:02.ee</ulink>. &merged;</para>

    <para>Several vulnerabilities in the &man.cpio.1; utility have
      been corrected.  For more
      details see security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:03.cpio.asc">FreeBSD-SA-06:03.cpio</ulink>. &merged;</para>

    <para>An error in &man.ipfw.4; IP fragment handling, which could
      cause a crash, has been fixed.  For more
      details see security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:04.ipfw.asc">FreeBSD-SA-06:04.ipfw</ulink>. &merged;</para>

    <para>A potential buffer overflow in the IEEE 802.11 scanning code
      has been corrected.  For more
      details see security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:05.80211.asc">FreeBSD-SA-06:05.80211</ulink>. &merged;</para>

    <para>Two instances in which portions of kernel memory could be
      disclosed to users have been fixed.  For more details see
      security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:06.kmem.asc">FreeBSD-SA-06:06.kmem</ulink>. &merged;</para>

    <para>A logic bug in the IP fragment handling in &man.pf.4;, which
      could cause a crash under certain circumstances, has been fixed.
      For more details see security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:07.pf.asc">FreeBSD-SA-06:07.pf</ulink>. &merged;</para>

    <para>A logic bug in the NFS server code, which could cause a crash when
      the server received a message with a zero-length payload, has been fixed.
      For more details see security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:10.nfs.asc">FreeBSD-SA-06:10.nfs</ulink>. &merged;</para>

    <para>A programming error in the &man.fast.ipsec.4; implementation
      results in the sequence number associated with a Security
      Association not being updated, allowing packets to unconditionally
      pass sequence number verification checks, has been fixed.
      For more details see security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:11.ipsec.asc">FreeBSD-SA-06:11.ipsec</ulink>. &merged;</para>

    <para>A logic bug that could cause &man.opiepasswd.1; to allow an unprivileged
      user to configure OPIE authentication for the root user under certain
      circumstances, has been fixed.
      For more details see security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:12.opie.asc">FreeBSD-SA-06:12.opie</ulink>. &merged;</para>

    <para>An asynchronous signal handling vulnerability in &man.sendmail.8;,
      which could allow a remote attacker to execute arbitrary code with the
      privileges of the user running sendmail, typically root, has been fixed.
      For more details see security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:13.sendmail.asc">FreeBSD-SA-06:13.sendmail</ulink>. &merged;</para>

    <para>[&arch.amd64;, &arch.i386;] An information disclosure issue found in the
      &os; kernel running on 7th- and 8th-generation AMD processors
      has been fixed.  For more details see security advisory <ulink
       url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:14.fpu.asc">FreeBSD-SA-06:14.fpu</ulink>. &merged;</para>

    <para>A bug in &man.ypserv.8;, which effectively disabled the
      <filename>/var/yp/securenets</filename> access control mechanism,
      has been corrected.  More details are available in security
      advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:15.ypserv.asc">FreeBSD-SA-06:15.ypserv</ulink>. &merged;</para>

    <para>A bug in the smbfs file system, which could allow an
      attacker to escape out of &man.chroot.2 environments on an smbfs
      mounted file system, has been fixed.  For more details, see
      security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:16.smbfs.asc">FreeBSD-SA-06:16.smbfs</ulink>. &merged;</para>

    <para>A potential denial of service problem in &man.sendmail.8;
      caused by excessive recursion which leads to stack
      exhaustion when attempting delivery of a malformed
      MIME message, has been fixed.  For more details,
      see security advisory <ulink
      url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:17.sendmail.asc">FreeBSD-SA-06:17.sendmail</ulink>. &merged;</para>

    <para>A potential buffer overflow condition in &man.sppp.4; has
      been corrected.  For more details, see security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:18.ppp.asc">FreeBSD-SA-06:18.ppp</ulink>. &merged;</para>

    <para>An OpenSSL bug related to validation of PKCS#1 v1.5
      signatures has been fixed.  For more details, see security
      advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:19.openssl.asc">FreeBSD-SA-06:19.openssl</ulink>. &merged;</para>

    <para>A potential denial of service attack against &man.named.8;
      has been fixed.  For more details, see security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:20.bind.asc">FreeBSD-SA-06:20.bind</ulink>. &merged;</para>

    <para>Several programming errors have been fixed in &man.gzip.1;.
      They could have the effect of causing a crash or an infinite
      loop when decompressing files.  More information can be found in
      security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:21.gzip.asc">FreeBSD-SA-06:21.gzip</ulink>. &merged;</para>

    <para>Several vulnerabilities have been fixed in OpenSSH.  More
      details can be found in security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:22.openssh.asc">FreeBSD-SA-06:22.openssh</ulink>. &merged;</para>

    <para>Multiple errors in the OpenSSL &man.crypto.3; library have
      been fixed.  Potential effects are varied, and are documented in
      more detail in security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:23.openssl.asc">FreeBSD-SA-06:23.openssl</ulink>. &merged;</para>

    <para>A bug that could permit corrupt archives to cause an
      infinite loop in &man.libarchive.3; and &man.tar.1; has been
      fixed.  More details are available in
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:24.libarchive.asc">FreeBSD-SA-06:24.libarchive</ulink>. &merged;</para>

    <para>A bug that could allow users in
      the <groupname>operator</groupname> group to read parts of kernel
      memory has been corrected.  For more details, consult security
      advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-06:25.kmem.asc">FreeBSD-SA-06:25.kmem</ulink>. &merged;</para>

    <para>A bug in the <filename>jail</filename> startup script that
      could permit privilege escalation via a symlink attack has been
      fixed.  More information is available in
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-07:01.jail.asc">FreeBSD-SA-07:01.jail</ulink>. &merged;</para>

    <para>Two remote denials of service in BIND (one involving DNSSEC and
      one involving recursive DNS queries) have been fixed.  For more
      information, see security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-07:02.bind.asc">FreeBSD-SA-07:02.bind</ulink>. &merged;</para>

    <para>Processing of IPv6 type 0 Routing Headers is now
      controlled by the <varname>net.inet6.ip6.rthdr0_allowed</varname>
      sysctl variable, which defaults to <literal>0</literal> (off).
      For more information, see security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-07:03.ipv6.asc">FreeBSD-SA-07:03.ipv6</ulink>. &merged;</para>

    <para>A potential heap overflow in the &man.file.1; utility
      (and the &man.libmagic.3; library on which it relies) has been
      fixed.  More details can be found in security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-07:04.file.asc">FreeBSD-SA-07:04.file</ulink>. &merged;</para>

    <para>Problems with &man.libarchive.3; and &man.tar.1; handling
      corrupted &man.tar.5; archive files have been fixed.  More
      details can be found in security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-07:05.libarchive.asc">FreeBSD-SA-07:05.libarchive</ulink>. &merged;</para>

    <para>A buffer overflow in &man.tcpdump.1; has been corrected.
      More information can be found in security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-07:06.tcpdump.asc">FreeBSD-SA-07:06.tcpdump</ulink>. &merged;</para>

    <para>A bug in &man.named.8;, which could result in an attacker
      being able to poison a resolver's DNS cache, has been fixed.
      More details are included in security advisory
      <ulink url="http://security.FreeBSD.org/advisories/FreeBSD-SA-07:07.bind.asc">FreeBSD-SA-07:07.bind</ulink>. &merged;</para>

  </sect2>

  <sect2 id="kernel">
    <title>Kernel Changes</title>

    <para>&man.acpi.4; now has support for the HPET time counter.  &merged;</para>

    <para>The &man.acpi.ibm.4; driver now supports setting the fan control
      mode to manual or automatic, and adjusting the fan speed if the
      fan control mode is manual.  To enable manual control of the fan speed,
      the sysctl variable <varname>dev.acpi_ibm.<replaceable>0</replaceable>.fan</varname>
      needs to be set to zero (manual).  This should only be used with
      extreme precaution, as disabling automatic fan control might
      overheat the hardware and lead to permanent damage.</para>

    <para>The &man.apm.4; suspend/resume support has been improved.</para>

    <para>The &man.cpufreq.4; CPU frequency control framework is now
      enabled in the <filename>GENERIC</filename> kernel.</para>

    <para>Security event auditing is now supported in the &os; kernel,
      and is enabled by the <literal>AUDIT</literal> kernel
      configuration option.  The option is enabled in the
      <filename>GENERIC</filename> kernel.  More information can be found
      in the &man.audit.4; manual page.</para>

    <para>Support for the Camellia block cipher has been added to the
      &os; kernel.  It can now be specified as a cipher in &man.ipsec.4;
      and &man.geli.8;.  More information on Camellia can be found in
      RFC 4132.</para>

    <para>The <literal>options COMPAT_43</literal> kernel
      configuration option has been deemed unnecessary and has been
      removed from <filename>GENERIC</filename> and related kernel
      configurations.  This change may result in a small performance
      increase for some workloads.</para>

    <para>The dumb console driver (&man.dcons.4;) is now enabled in the
      <filename>GENERIC</filename> kernel.</para>

    <para>The &man.ddb.4; debugger now provides the <literal>show lock</literal>
      command.  If the argument has a valid lock class,
      this displays various information about the lock and calls a
      new function pointer in lock_class (lc_ddb_show) to dump class-specific
      information about the lock as well (such as the owner of a mutex or
      xlock'ed sx lock).  &merged;</para>

    <para>The &man.ddb.4; debugger now provides the <literal>show sleepq</literal>
      command.  This takes a wait channel as an argument and looks
      for a sleep queue associated with that wait channel.</para>

    <para><filename>DEFAULTS</filename> kernel configuration files
      for each platform have been added.  These files contain
      directives that are implicitly included in all kernel
      configurations, and generally include basic, mandatory
      functionality for each platform.  &merged;</para>

    <para>A bug in file descriptor handling such that a simple
      <literal>close(0); dup(fd)</literal> sequence does not return
      descriptor <literal>0</literal> in some cases, has been fixed.</para>

    <para>The &man.firmware.9; subsystem has been added.  This
      subsystem provides a mechanism
      to load binary data into the kernel via a specially crafted module.
      &merged;</para>

    <para>The &man.gdb.1; remote debugging interface now supports
      copying console messages to a remote debugger instance.
      To enable this, set <literal>debug.gdbcons="1"</literal>
      in <filename>loader.conf</filename>, enter <literal>boot -d;
	gdb; step</literal> from the loader prompt,
      then attach &man.gdb.1; from a remote machine.
      The sysctl variable <varname>debug.gdbcons</varname> can be
      used to turn on/off this functionality.</para>

    <para>&man.hwpmc.4; and &man.pmcstat.8; now support profiling
      of dynamically loaded kernel modules and
      shared objects loaded with &man.dlopen.3;.</para>

    <para>A new <varname>kern.hostuuid</varname> sysctl variable
      has been added to hold a host's Universally Unique Identifier
      (UUID).  This UUID is computed or generated by a new
      <filename>rc.d/hostid</filename> startup script and, where
      possible, is saved to disk to be persistent across reboots.</para>

    <para>The <option>INCLUDE_CONFIG_FILE</option> kernel configuration
      option has been improved.  The full configuration of a running kernel
      can now be obtained via <command>sysctl -b kern.conftxt</command>.
      It can also be extracted from a kernel file via
      <command>config -x kernelfile</command>.  To preserve the literal
      kernel configuration with all the comments included, the
      <option>-C</option> option of &man.config.8; can be used.</para>

    <para>Support for Kernel Scheduled Entities (KSE) is now a kernel
      option (previously it was a mandatory feature in the kernel).
      It is enabled in the GENERIC kernel (thus there is no change in
      functionality) for all platforms except &arch.sun4v;.</para>

    <para>The Linux ABI support was enhanced to support emulation of
      Linux 2.6.16.  This is not enabled by default.  To turn it on
      the <varname>compat.linux.osrelease</varname> sysctl variable
      has to be set to <literal>2.6.16</literal>.  Note that this
      support is still experimental.</para>

    <para>Support for Message Signaled Interrupts (MSI) and Extended
      Message Signaled Interrupts (MSI-X) has been added to the kernel's
      PCI support code.  &merged;</para>

    <para>The &man.priv.9; kernel interface has been added.  Its purpose
      is checking the availability of privilege for threads and credentials.
      Unlike the existing &man.suser.9; interface, &man.priv.9; exposes a
      named privilege identifier to the privilege checking code, allowing
      more complex policies regarding the granting of privilege to be
      expressed.</para>

    <para>The &man.random.4; entropy device driver is now MPSAFE.
      &merged;</para>

    <para>&os; now supports concurrent &man.read.2;/&man.readv.2;
      access to a file.</para>

    <para>The kernel's &man.sx.9; locks have been optimized to use
      simple atomic operations for the common cases of obtaining and 
      releasing shared and exclusive locks.  While this change is not
      generally user-visible, it is the basis for some substantial
      performance improvements.</para>

    <para>The ULE process scheduler has been revised to improve its
      behavior, in particular interactivity under load, for both
      uniprocessor and multiprocessor machines.  This
      implementation has commonly been referred to as <quote>ULE
      3.0</quote>.  (ULE 3.0 was formerly known as SCHED_SMP,
      which in turn was based on version 2.0 of the ULE scheduler.
      ULE 2.0 was never a part of any &os; release, however it
      was the subject of many development, testing, and
      benchmarking efforts.)</para>

    <para>The <literal>SIGCHLD</literal> signal queuing has been
      added.  For each child process whose status has been changed,
      a <literal>SIGCHLD</literal> instance is queued.  If the signal is still pending,
      and the process changed status several times, the signal information
      is updated to reflect the latest process status.
      There is a loader tunable <varname>kern.sigqueue.queue_sigchild</varname>
      which can control the behavior, setting it to zero disables the
      <literal>SIGCHLD</literal> queuing feature.</para>

    <para>[&arch.amd64;, &arch.i386;] Instead of including all of physical
      memory in a kernel crash dump, the kernel now defaults to dumping only pages that are
      actively mapped into kernel virtual memory.  A new
      <varname>debug.minidump</varname> sysctl variable
      can be used to turn off this behavior when set to zero. &merged;</para>

    <para>A new sysctl variable <varname>kern.malloc_stats</varname>
      has been added.  This allows exporting of kernel malloc
      statistics via a binary structure stream.</para>

    <para>A new sysctl variable <varname>kern.forcesigexit</varname>
      has been added.  This forces a process
      to sigexit if a trap signal is being held by the current thread or
      ignored by the current process.  It is enabled by default.</para>

    <para>The pcvt(4) driver, an alternative to &man.syscons.4;,
      has been removed, as it had fallen out of sync with the rest
      of the kernel.</para>

    <para>RedZone, a buffer corruption protection for the kernel &man.malloc.9;
      facility has been implemented.  This detects both buffer underflows and
      overflows at runtime on &man.free.9; and &man.realloc.9;,
      and prints backtraces from where memory was allocated and from where
      it was freed.  For more details, see the &man.redzone.9; manual page.</para>

    <para>A new sysctl variable <varname>security.mac.biba.interfaces_equal</varname>
      which makes all network interfaces be created with the label
      <literal>biba/equal(equal-equal)</literal>, has been added.
      This is useful where programs such as &man.dhclient.8; and &man.ppp.8;.
      which initialize network interfaces do not have any labeling support.
      This variable is set as <literal>0</literal> (disabled) by default.
      &merged;</para>

    <para>A new loader tunable <varname>vm.kmem_size_min</varname> has been
      added.  This allows to specify a minimal size for
      <varname>vm.kmem_size</varname>.</para>

    <para>A new sysctl variable <varname>vm.zone_stats</varname>
      has been added.  This allows to export &man.uma.9; allocator
      statistics via a binary structure stream.</para>

    <para>The sysctl variable <varname>hw.pci.do_powerstate</varname>
      has been split into two sysctl variables
      <varname>hw.pci.do_powerstate_nodriver</varname>
      and <varname>hw.pci.do_powerstate_resume</varname>.
      Also, these variables have been changed from a boolean to a range.
      <literal>0</literal> means no power management,
      <literal>1</literal> means conservative power management which
      any device class that has caused problems is added to the watch list,
      <literal>2</literal> means aggressive power management where
      any device class that is not fundamental to the system is added to the list,
      and <literal>3</literal> means power them all down unconditionally.
      The default values are <literal>0</literal> for
      <varname>hw.pci.do_powerstate_nodriver</varname> and
      <literal>1</literal> for <varname>hw.pci.do_powerstate_resume</varname>.</para>

    <para>[&arch.ia64;] The <filename>GENERIC</filename> kernel now enables
      SMP support by default.</para>

    <para>Sample kernel configuration files
      <filename>src/sys/<replaceable>arch</replaceable>/conf/MAC</filename>
      for the Mandatory Access Control framework have been added.</para>

    <para><varname>POSIX_TIMERS</varname> support has been updated to 200112L.</para>

    <para>An experimental support for POSIX message queue has been
      implemented.</para>

    <para>&os; now runs on the Xbox, whose architecture is nearly identical
      to the i386.  For details of the latest development, see
      <ulink url="http://www.FreeBSD.org/platforms/xbox.html"></ulink>.
      &merged; </para>

    <para>The locking strategy for UNIX domain sockets has been
      revised to improve concurrency; this change has yielded
      substantial performance improvements on various SMP workloads
      (in particular, MySQL on 8-way &arch.amd64; systems) with little
      or no measured overhead on UP systems.</para>

    <para>Several minor but widespread changes to the Newbus API have
      been made In order to support some on-going work with interrupt
      filtering.  Because this change also breaks the kernel ABI, all
      third-party device drivers will need to be modified and
      recompiled.</para>

    <sect3 id="boot">
      <title>Boot Loader Changes</title>

      <para>A new option <option>-S</option>,
	which allows setting the <filename>boot2</filename>
	serial console speed in the <filename>/boot.config</filename>
	file or on the <prompt>boot:</prompt> prompt line,
	has been added.</para>

      <para>[&arch.amd64;, &arch.i386;] A new loader tunable
	<varname>comconsole_speed</varname> to change
	the serial console speed has been added.
	If the previous stage boot loader requested a serial console,
	then the default speed is determined from the current serial port
	speed.  Otherwise it is set to 9600 or the value of
	the <literal>BOOT_COMCONSOLE_SPEED</literal> kernel option.
	&merged;</para>

      <para>[&arch.amd64;, &arch.i386;] &man.firewire.4; and &man.dcons.4;
	support has been added to the boot loader.  To enable it,
	<literal>LOADER_FIREWIRE_SUPPORT=yes</literal> has to be added
	to <filename>/etc/make.conf</filename> and the loader be rebuilt.
	</para>

      <!-- Above this line, order boot loader changes by keyword-->

      <para>[&arch.pc98;] A bootable CDROM loader has been implemented
	for the pc98 platform. &merged;</para>

      <para>[&arch.pc98;] The <application>IPLware</application> support
	in boot0.5 has been enhanced to support version 3.33.</para>

      <para>[&arch.i386;] A bug in the i386 boot loader, which could
	cause file system corruption if
	a <filename>nextboot.conf</filename> file was used and landed
	after cylinder 1023, has been fixed. &merged;</para>

    </sect3>

    <sect3 id="proc">
      <title>Hardware Support</title>

      <para>The &man.amdsmb.4; driver has been added.  It provides
	support for the AMD-8111 SMBus 2.0 controller. &merged;</para>

      <para>The &man.cardbus.4;, &man.pccard.4;,
	&man.pccbb.4;, and &man.exca.4; drivers are now buildable
	as kernel modules.</para>

      <para>An &man.acpi.dock.4; driver has been added to provide
        support for controlling laptop docking station functions via
        ACPI.  &merged;</para>

      <para>The &man.acpi.thermal.4; driver now supports
	passive cooling. &merged;</para>

      <para>The &man.acpi.thermal.4; driver now supports overriding
	the <literal>_PSV</literal>, <literal>_HOT</literal>, and
	<literal>_CRT</literal> temperature values.</para>

    <para>Support for the alpha architecture has been removed.  Alpha
      support will remain on the RELENG_5 and RELENG_6 codelines.</para>

      <para>The &man.cardbus.4; driver now supports
	<filename>/dev/cardbus<replaceable>%d</replaceable>.cis</filename>.</para>

      <para>[&arch.i386;, &arch.pc98;] The &man.ce.4; driver,
	which supports Cronyx Tau-PCI/32 adapters, has been added.
	&merged;</para>

      <para>[&arch.i386;, &arch.amd64;] The &man.coretemp.4; driver
	has been added to provide temperature readings on &intel;
	&core; processors.</para>

      <para>The <literal>est</literal> &man.cpufreq.4; driver now supports
        frequency control for the VIA C7-M family of processors.</para> 

      <para>Support for the PadLock Security Co-processor in VIA C3,
	Eden, and C7
	processors has been added to the &man.crypto.9; subsystem.
	More information can be found in the &man.padlock.4; manual
	page.
	&merged;</para>

      <para>The &man.firewire.4; code is now MPSAFE.</para>

      <para>icee(4), a generic I2C EEPROM driver, has been added.</para>

      <para>A bug which prevented the &man.ichsmb.4; kernel module
	from unloading has been fixed.</para>

      <para>[&arch.amd64;, &arch.i386;] Dual-core processors (such as the Intel
	Core Duo) now have both cores available for use by
	default in SMP-enabled kernels. &merged;</para>

      <para>[&arch.amd64;, &arch.i386;] &man.ipmi.4;, an OpenIPMI compatible driver,
	has been added.
	OpenIPMI (Intelligent Platform Management Interface) is an open
	standard designed to enable remote monitoring and control of server,
	networking and telecommunication platforms. &merged;</para>

      <para>The &man.kbdmux.4; driver has been integrated into &man.syscons.4; and
	the <devicename>kbd</devicename> device driver.
	By default &man.syscons.4; will look for the &man.kbdmux.4;
	keyboard first, and then, if not found, look for any keyboard.
	Switching to &man.kbdmux.4; can be done at boot time by loading
	the <literal>kbdmux</literal> kernel module via &man.loader.8;,
	or at runtime via &man.kldload.8; and releasing the active
	keyboard.  &merged;</para>

      <para>[&arch.amd64;, &arch.i386;] The &man.kbdmux.4; driver is now included in the
	<filename>GENERIC</filename> kernel by default.
	Also, the <quote>Boot FreeBSD with USB keyboard</quote>
	menu item in the boot loader menu has been removed
	since this fixes USB keyboard probing problems.
	&merged;</para>

      <para>The &man.nfsmb.4; driver, which supports the NVIDIA nForce
	2/3/4 SMBus 2.0 controller, has been added.  &merged;</para>

      <para>[&arch.ia64;, &arch.powerpc;] The loader tunable <varname>debug.mpsafevfs</varname>
	is set to <literal>1</literal> by default.</para>

      <para>The &man.sab.4; driver has been removed (it has been
        superceded by the &man.scc.4; driver).</para>

      <para>The &man.scc.4; driver has been added.
	This provides generic support for serial communications
	controllers and delegates the control over each channel
	and mode to a subordinate driver such as &man.uart.4;.</para>

      <para>[&arch.amd64;] The smbios(4) driver support for amd64 has been
	added.</para>

      <para>[&arch.sun4v;] &os; now has preliminary support for the Sun Microsystems
	UltraSPARC-T1 architecture.  &os;/sun4v has been demonstrated
	to run on the Sun Fire T1000 and Sun Fire T2000 servers.
	More information can be found on the
	<ulink url="http://www.FreeBSD.org/platforms/sun4v.html">sun4v
	Project</ulink>
	page.</para>

      <para>The tnt4882(4) driver, which supports the National Instruments
	PCI-GPIB card, has been added.</para>

      <para>[&arch.amd64;, &arch.i386;, &arch.ia64;, &arch.sparc64;] The &man.uart.4; driver has been included in the
	<filename>GENERIC</filename> kernel by default.
	When both &man.sio.4; and &man.uart.4; can handle a given serial port,
	&man.sio.4; will claim it.</para>

      <para>The &man.uark.4; driver, which supports the Arkmicro
	Technologies ARK3116-based USB serial adapter, has been
	added.</para>

      <para>The &man.uart.4; driver now supports LOM (Lights Out Management)
	and RSC (Remote System Control) devices as consoles.</para>

      <para>The zs driver has been removed.  Its functionality
	has been superceded by that of the &man.uart.4; driver.</para>

      <para>[&arch.i386;] A new loader tunable
	<varname>hw.apic.enable_extint</varname> has been added.
	This tunable can be used to disable masking of the ExtINT pin on the first
	I/O APIC.  At least one chipset for the Intel Pentium III seems
	to need this, even though all of the pins in the 8259As are masked.
	The default is still to mask the ExtINT pin.</para>

      <para>[&arch.i386;] Support has been improved for
	so-called <quote>legacy-free</quote> hardware, in particular,
	i386 systems without AT-style keyboard controllers such as the
	Macbook Pro. &merged;</para>

      <sect4 id="mm">
	<title>Multimedia Support</title>

	<para>The &man.agp.4; driver now supports ATI AGP chipsets.
	  &merged;</para>

	<para>The new midi(4) driver which is based on NetBSD's one
	  has been added.  This supports &man.snd.cmi.4; and
	  &man.snd.emu10k1.4; drivers.</para>

	<para>The &man.sound.4; driver now supports
	  wider range sampling rate, multiple precisions choice,
	  and 24/32 bit PCM format conversion.  &merged;</para>

	<para>The &man.snd.als4000.4; driver is now MPSAFE.  &merged;</para>

	<para>The &man.snd.atiixp.4; driver has been added.
	  This supports ATI IXP 200/300/400 series audio controllers.  &merged;</para>

	<para>The &man.snd.atiixp.4; driver now supports
	  suspend and resume features.  &merged;</para>

	<para>The &man.snd.cmi.4; driver is now MPSAFE.</para>

	<para>The &man.snd.emu10kx.4; driver has been added.  It
	  supports Creative SoundBlaster Live! and Audigy series sound
	  cards with optional pseudo-multichannel playback.</para>

	<para>The &man.snd.envy24.4; driver has been added to support
	  the Envy24 series of audio chips.</para>

	<para>The &man.snd.envy24ht.4; driver has been added to support
	  the VIA Envy24HT series of audio chips.</para>

	<para>The &man.snd.es137x.4; driver is now MPSAFE.  &merged;</para>

	<para>The &man.snd.ich.4; driver is now MPSAFE.  &merged;</para>

	<para>The &man.snd.hda.4; driver has been added.  It supports
	  devices that conform to revision 1.0 of the Intel High Definition
	  Audio specification.</para>

	<para>The &man.snd.solo.4; driver is now MPSAFE.  &merged;</para>

	<para>The &man.snd.spicds.4; driver has been added to support
	  I2S SPI audio codec chips.</para>

	<para>The &man.snd.via8233.4; driver is now MPSAFE.  &merged;</para>

	<para>The &man.snd.via82c686.4; driver is now MPSAFE.  &merged;</para>

	<para>[&arch.amd64;] The &man.speaker.4; driver now supports &os;/amd64.  &merged;</para>

	<para>The &man.uaudio.4; driver now supports 24/32 bit audio
	  formats and conversion.</para>
      </sect4>

      <sect4 id="net-if">
	<title>Network Interface Support</title>

	<para>The &man.ath.4; driver has been updated to
	  HAL version 0.9.20.3.  &merged;</para>

	<para>[&arch.amd64;, &arch.i386;, &arch.pc98;, &arch.sparc64;]
	  The &man.ath.4;, &man.ath.hal.4;, and
	  <literal>ath_rate_sample</literal> drivers have been
	  included in the <filename>GENERIC</filename> kernel by
	  default. &merged;</para>

	<para>The &man.axe.4; driver now supports &man.altq.4;.  &merged;</para>

	<para>[&arch.amd64;, &arch.i386;] The &man.bce.4; driver, which supports Broadcom
	  NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet controllers,
	  has been added.  For more details, see &man.bce.4;. &merged;</para>

	<para>A bug which prevents the &man.bfe.4; driver from working
	  on a system with over 1GB RAM has been fixed.  &merged;</para>

	<para>The &man.bge.4; driver's Jumbo frame support is now MPSAFE.</para>

	<para>The &man.bge.4; driver now supports big-endian
	  architectures such as sparc64.</para>

	<para>The &man.bge.4; driver now supports &man.polling.4; mode.
	  &merged;</para>

	<para>The &man.cm.4; driver is now MPSAFE.</para>

	<para>The &man.cxgb.4; driver has been added.  It provides support for
	  10 Gigabit Ethernet adapters based on the Chelsio T3 and T3B chipsets.
	  </para>

	<para>The &man.dc.4; driver is now MPSAFE. &merged;</para>

	<para>The &man.de.4; driver has been converted to the &man.bus.dma.9;
	  API and is now MPSAFE.</para>

	<para>The &man.ed.4; driver is now MPSAFE.</para>

	<para>The &man.edsc.4; driver, which provides Ethernet discard network
	  interfaces, has been added.  &merged;</para>

	<para>The &man.el.4; driver has been removed due to lack of use.</para>

	<para>The &man.em.4; driver now supports big-endian
	  architectures such as sparc64.  &merged;</para>

	<para>The &man.em.4; driver has been updated to
	  version 6.5.0 from Intel.  Among other changes, it now supports
	  80003, 82571, 82571EB, 82572 and 82575 based adapters, as well as
	  onboard-NICs on ICH8-based motherboards. &merged;</para>

	<para>The &man.em.4; driver now includes
	  initial support for suspend and resume features.</para>

	<para>The performance of the &man.em.4; driver has been improved
	  by using a fast interrupt handler and taskqueue
	  instead of ithread handler.  This change can be disabled
	  by defining <literal>NO_EM_FASTINTR</literal> kernel option
	  for debugging purpose.</para>

	<para>The IP over FireWire (&man.fwip.4;) driver is now enabled in
	  the <filename>GENERIC</filename> kernel.</para>

	<para>The &man.gem.4; driver now supports &man.altq.4;.</para>

	<para>The firmware images needed by the &man.ipw.4; driver are now
	  part of the &os; base system.  For the loaded firmware to work the
	  license at <filename>/usr/share/doc/legal/intel_ipw/LICENSE</filename>
	  must be agreed to and <literal>legal.intel_ipw.license_ack=1</literal>
	  has to be added to <filename>/boot/loader.conf</filename>.
	  Prior versions of the driver used the firmware image in the
	  <filename role="package">net/ipw-firmware-kmod</filename>
	  port/package or the
	  <filename role="package">net/ipw-firmware</filename>
	  port/package. &merged;</para>

	<para>The &man.iwi.4; driver now supports big-endian
	  architectures such as sparc64.</para>

	<para>A number of improvements and bugfixes have been made to the
	  functionality of the &man.iwi.4; driver.  &merged;</para>
	  
	<para>The firmware images needed by the &man.iwi.4; driver are now
	  part of the &os; base system.  For the loaded firmware to work the
	  license at <filename>/usr/share/doc/legal/intel_iwi/LICENSE</filename>
	  must be agreed to and <literal>legal.intel_iwi.license_ack=1</literal>
	  has to be added to <filename>/boot/loader.conf</filename>.
	  Prior versions of the driver used the firmware image in the
	  <filename role="package">net/iwi-firmware-kmod</filename>
	  port/package or the
	  <filename role="package">net/iwi-firmware</filename>
	  port/package. &merged;</para>

	<para>The ixgbe driver, which supports the Intel 10G PCI-Express
	  adapter (82598), has been added.</para>

	<para>The &man.le.4; driver, which supports AMD Am7900 LANCE
	  and Am79C9xx PCnet NICs,
	  has been added.  While the &man.lnc.4; driver also supports these
	  NICs, this driver has several advantages over it such as
	  MPSAFE, ALTQ, VLAN_MTU, ifmedia, and 32-bit DMA for PCI
	  variants.  This driver is based on NetBSD's implementation.
	  &merged;</para>

	<para>The &man.lge.4; driver is now MPSAFE. &merged;</para>

	<para>The lnc(4) driver has been removed.  The &man.le.4; and
	  &man.pcn.4; drivers support all devices that were supported
	  by lnc(4).</para>

	<para>The &man.msk.4; driver has been added.  It supports
	  network interfaces using the Marvell/SysKonnect Yukon II
	  Gigabit Ethernet controller.  &merged;</para>

	<para>The &man.my.4; driver is now MPSAFE. &merged;</para>

	<para>The &man.my.4; driver now supports &man.altq.4;.  &merged;</para>

	<para>[&arch.amd64;, &arch.i386;] The &man.mxge.4; driver,
	  which supports Myricom Myri10GE 10 Gigabit Ethernet
	  adapters, has been added.  For more details, see
	  &man.mxge.4;.  &merged;</para>

	<para>[&arch.amd64;, &arch.i386;] The &man.nfe.4; driver, an open-source driver for nForce
	  Ethernet devices, has been added, originally from
	  OpenBSD.  This driver has replaced the &man.nve.4; driver in
	  the <filename>GENERIC</filename> kernel.</para>

	<para>[&arch.arm;] The &man.npe.4; driver, which supports the
	   Intel XScale Network Processing Engine, has been
	   added. &merged;</para>

	<para>The &man.nve.4; driver has been updated to version 1.0-0310
	  (23-Nov-2005).  It also now has &man.altq.4; support. &merged;</para>

	<para>The &man.nxge.4; driver, which supports the Neterion
	  Xframe 10 Gigabit Ethernet adapter, has been added.</para>

	<para>The &man.pcn.4; driver is now MPSAFE. &merged;</para>

	<para>The &man.re.4; driver now supports the D-Link DGE-528(T)
	  Gigabit Ethernet card.</para>

	<para>The &man.rum.4; driver has been added.  It supports
	  WLAN adapters based on the Ralink RT2501USB and RT2601USB
	  chipsets.</para>

	<para>The &man.sf.4; driver is now MPSAFE. &merged;</para>

	<para>The &man.sk.4; driver is now MPSAFE. &merged;</para>

	<para>The &man.ste.4; driver is now MPSAFE.  &merged;</para>

	<para>The &man.stge.4; driver has been added.  It supports the
	  Sundance/Tamarack TC9021 Gigabit Ethernet controller and was
	  ported from NetBSD.  &merged;</para>

	<para>The &man.ti.4; driver now supports big-endian
	  architectures such as sparc64.</para>

	<para>The &man.ufoma.4; driver for
	  FOMA (third generation mobile phone system by NTT DoCoMo, Inc.
	  in Japan) has been added.
	  This should support other third generation mobile phones
	  since the driver is based on USB Implementation Guideline
	  from MCPC (Mobile Computing Promotion Consortium) in Japan.</para>

	<para>The vgapci(4) driver has been added.  This is a stub
	  device driver for VGA PCI devices and serves as a bus
	  so that other drivers such as drm(4),
	  &man.acpi.video.4;, and &man.agp.4; can attach to
	  it thus allowing multiple drivers for the same device.</para>

	<para>The &man.vge.4; driver now supports &man.altq.4;.  &merged;</para>

	<para>The &man.wi.4; driver is now buildable as
	  a kernel module.</para>

	<para>[&arch.amd64;, &arch.i386;, &arch.pc98;] The &man.wlan.wep.4;,
	  &man.wlan.ccmp.4;, and &man.wlan.tkip.4; drivers
	  have been included in the <filename>GENERIC</filename>
	  kernel by default.</para>

	<para>[&arch.amd64;, &arch.i386;] The &man.zyd.4; driver
	  has been added.  It provides support for ZyDAS ZD1211/ZD1211B USB
	  IEEE 802.11 b/g wireless network devices.</para>

	<para>The network interface groups feature has been imported
	  from OpenBSD.  This feature allows an administrator to, for
	  example, apply firewall rules to an entire group of
	  interfaces.  More information can be found in
	  &man.ifconfig.8;.</para>

	<para>The 802.11 protocol stack has been significantly reworked.
	  Among the new features are support for background scanning
	  and roaming between APs, as well as support that will be
	  required by 802.11n-capable devices.</para>

	<para>The 802.11 protocol stack now has support for 900 MHz
	  cards, as well as quarter- and half-channel support
	  for 802.11a. &merged;</para>

	<para>The &os; network stack now runs entirely free of the
	  Giant kernel lock, and relies solely on the kernel's
	  fine-grained locking primitives to manage parallelism.  This
	  significantly improves the network stack's performance on
	  multi-processor systems; uni-processor systems could also
	  see performance gains.
	  ISDN4BSD and netatm have been temporarily
	  disconnected from the build.  These modules all require
	  the Giant kernel lock for their operation; disconnecting
	  them allows the removal of the NET_NEEDS_GIANT compatability
	  shim.  It is planned to convert
	  these modules to fine-grained kernel locking and re-connect
	  them for &os; 7.1-RELEASE.</para>
      </sect4>
    </sect3>

    <sect3 id="net-proto">
      <title>Network Protocols</title>

      <para>The &man.arp.4; retransmission algorithm has been
	rewritten so that ARP requests are retransmitted without
	suppression, while there is demand for such ARP entry.
	Due to this change, a sysctl variable
	<varname>net.link.ether.inet.host_down_time</varname>
	has been removed.  &merged;</para>

      <para>The &man.arp.4; protocol now supports a sysctl variable
	<varname>net.link.ether.inet.log_arp_permanent_modify</varname>
	to suppress logging of attempts to modify
	permanent ARP entries.  &merged;</para>

      <para>[&arch.amd64;, &arch.i386;, &arch.pc98;] An experimental BPF Just-In-Time compiler
	has been implemented for both &man.bpf.4; and &man.ng.bpf.4;.
	To enable this, the
	<literal>options BPF_JITTER</literal> kernel option is needed.
	The <varname>net.bpf_jitter.enable</varname>
	can be used to disable this feature.</para>

      <para>Multiple copies of a packet received via different
        &man.bpf.4; listeners now all have identical
        timestamps. &merged;</para>

      <para>The &man.bpf.4; device now supports several new
	&man.ioctl.2; calls to allow examining inbound vs. outbound
	packets, as well as packets that have been injected onto the
	network.</para>

      <para>The bridge(4) driver has been removed from the tree.  Its
	functionality has been completely replaced by
	&man.if.bridge.4;.</para>

      <para>The &man.enc.4; IPsec filtering pseudo-device has been
	added.  It allows firewall packages using the &man.pfil.9;
	framework to examine (and filter) IPsec traffic before
	outbound encryption and after inbound decryption. &merged;</para>

      <para>The &man.gre.4; driver, which is for GRE encapsulation
	found in RFC 1701 and RFC 1702, now supports IPv6 over GRE.</para>

      <para>The &man.if.bridge.4; driver now supports
	creating SPAN ports, which transmit a copy of every frame
	received by the bridge.  This feature can be enabled
	by using &man.ifconfig.8;.  &merged;</para>

      <para>The &man.if.bridge.4; driver now supports
	RFC 3378 EtherIP.  This change makes it possible to
	add &man.gif.4; interfaces to bridges, which will then
	send and receive IP protocol 97 packets.
	Packets are Ethernet frames with an EtherIP header prepended.
        &merged;</para>

      <para>The &man.if.bridge.4; driver now supports RSTP, the Rapid
	Spanning Tree Protocol (802.1w). &merged;</para>

      <para>The &man.if.bridge.4; driver now supports a
	<literal>private</literal> flag on bridge ports;
	no private port on a bridge can communicate with any
	other private port.  This functionlity is useful in
	scenarios such as number of customers VLANs bridged
	with a server network; it might be desirable to prevent
	the customer VLANs from communicating with each other
	but allow all of them to access the server network.  The
	private flag on a bridge port can be set or cleared via
	&man.ifconfig.8;.</para>

      <para>A hard-coded limit on the number of IPv4 multicast group
        memberships (formerly 20) has been removed.</para>

      <para>The path MTU discovery for multicast packets in the &os;
	IPv6 stack has been disabled by default.
	Path MTU notification from a large number of multicast routers
	can be a kind of distributed Denial-of-Service attack to a router.
	This feature can be re-enabled by using a new sysctl variable
	<varname>net.inet6.ip6.mcast_pmtu</varname>.  &merged;</para>

      <para>IPv6 multicast forwarding is now dynamically loadable, via
	the <filename>ip_mroute.ko</filename> module.</para>

      <para>IPv6 link-local addresses are now enabled only
	if <varname>ipv6_enable</varname> is set in &man.rc.conf.5;.
	&merged;</para>

      <para>The &man.ipfw.4; IP packet filter now supports IPv6.  &merged;</para>

      <para>The &man.ipfw.4; firewall system now supports
	a <literal>tablearg</literal> feature, which allows
	values obtained from a table lookup to be used as part of a
	rule.  	&merged;
	This feature can be used to optimize some rulesets
	or to implement policy-based routing inside a firewall.
	For example, the following rules will throw different
	packets to different pipes:</para>

      <programlisting>pipe 1000 config bw 1000Kbyte/s
pipe 4000 config bw 4000Kbyte/s
table 1 add x.x.x.x 1000
table 1 add x.x.x.y 4000
pipe tablearg ip from table(1) to any</programlisting>

      <para>The &man.ipfw.4; packet filter now supports
	<literal>tag</literal> and <literal>untag</literal> rule keywords.
	When a packet matches a rule with the <literal>tag</literal>
	keyword, the numeric tag for the given number in the range
	from 0 to 65535 will be attached to the packet.
	The tag acts as an internal marker (it is not sent out over
	the wire) that can be used to identify these packets later on,
	for example, by using <literal>tagged</literal>
	rule option.  For more details, see &man.ipfw.8;. &merged;</para>

      <para>The &man.ipfw.4; packet filter now supports filtering on
	Routing Header Type 0 and Mobile IPv6 Routing Header Type 2
	in addition to filtering on the non-differentiated presence
	of any Routing Header.</para>

      <para>The <literal>IPFIREWALL_FORWARD_EXTENDED</literal> kernel
	option has been removed.  This option was used to permit
	&man.ipfw.4; to redirect packets with local destinations.
	This behavior is now always enabled when
	the <literal>IPFIREWALL_FORWARD</literal> kernel option is
	enabled. &merged;</para>

      <para>The ip6fw(8) packet filter has been removed.  Since &man.ipfw.4; has gained
        IPv6 support, it should be used instead.  Please note that some rules might need
        to be adjusted.</para>

      <para>The KAME IPsec implementation has been removed.  In its
	place, <literal>FAST_IPSEC</literal> is now the only IPsec
	implementation supported by the &os; kernel.  The
	<literal>IPSEC</literal> kernel configuration option, which
	formerly enabled KAME IPsec, now enables
	<literal>FAST_IPSEC</literal>.  <literal>FAST_IPSEC</literal>
	now supports both IPv4 and IPv6, uses fine-grained kernel
	locking, and supports hardware cryptographic
	acceleration.</para>

      <para>Support for tunneling IPX over IP has been removed.</para>

      <para>The &man.lagg.4; driver, ported from OpenBSD and NetBSD,
	has been added to support a variety of protocols and algorithms
	for link aggregation, failover, and fault tolerance.  &merged;</para>

      <para>The &man.natm.4;, Native Mode ATM protocol layer is now MPSAFE.</para>

      <para>The &man.ng.car.4; Netgraph node has been added.  It implements
	various traffic shaping and rate limiting algorithms.</para>

      <para>A new &man.ng.deflate.4; Netgraph node type has been
	added.  It implements Deflate PPP compression. &merged;</para>

      <para>The &man.ng.ether.4; Netgraph node no longer overwrites
        the MAC address of outgoing frames by default. &merged;</para>

      <para>The &man.ng.h4.4; Netgraph node is now MPSAFE.</para>

      <para>The &man.ng.iface.4; Netgraph node now supports &man.altq.4;.
	&merged;</para>

      <para>The &man.ng.ppp.4; Netgraph node is now MPSAFE.  &merged;</para>

      <para>A new &man.ng.pred1.4; Netgraph node type has been added
	to implement Predictor-1 PPP compression. &merged;</para>

      <para>The &man.ng.tag.4; Netgraph node has been added to
        support the manipulation of mbuf tags attached to data in the
        kernel.  &merged;</para>

      <para>A bug has been fixed in which NFS over TCP would not reconnect
	when the server sent a FIN.  This problem had occurred
	with Solaris NFS servers.  &merged;</para>

      <para>The default retransmit timer for NFS over TCP is now 60 seconds.
	This change prevents the unnecessary retransmission of
	non-idempotent NFS requests.  The <varname>nfs_access_cache</varname>
	variable in &man.rc.conf.5; has also been changed to 60.</para>

      <para>The default minimum number of nfsiod kernel threads
	(&man.sysctl.8; variable <varname>vfs.nfs.iodmin</varname>)
	has been changed from 4 to 0.</para>

      <para>The sysctl variables <varname>net.inet.ip.portrange.reservedhigh</varname>
	and <varname>net.inet.ip.portrange.reservedlow</varname>
	can be used with IPv6 now. &merged;</para>

      <para>A new sysctl variable <varname>net.inet.icmp.reply_from_interface</varname>
	has been added.  This allows the &man.icmp.4;
	reply to non-local packets to be generated with
	the IP address the packet came through in.
	This is useful for routers to show in &man.traceroute.8;
	the actual path a packet has taken instead of
	the possibly different return path.</para>

      <para>A new sysctl variable <varname>net.inet.icmp.quotelen</varname>
	has been added.  This allows to change length of
	the quotation of the original packet in an ICMP reply.
	The minimum of 8 bytes is internally enforced.
	The maximum quotation is the remaining space in the
	reply mbuf.  This option is added in response to the
	issues raised in I-D
	<filename>draft-gont-icmp-payload-00.txt</filename>.</para>

      <para>The &man.icmp.4; now always quotes the entire TCP header
	when responding and allocate an mbuf cluster if needed.
	This change fixes the TCP issues raised in I-D
	<filename>draft-gont-icmp-payload-00.txt</filename>.</para>

      <para>A new socket option <literal>IP_MINTTL</literal> has been added.
	This may be used to set the minimum acceptable
	TTL a packet must have when received on a socket.
	All packets with a lower TTL are silently dropped.
	This works on already connected/connecting and
	listening sockets for RAW, UDP, and TCP.  This option
	is only really useful when set to <literal>255</literal>, preventing packets
	from outside the directly connected networks reaching
	local listeners on sockets.  Also, this option allows
	userland implementation of <quote>The Generalized TTL
	  Security Mechanism (GTSM)</quote> found in RFC 3682.</para>

      <para>The kernel &man.ppp.4; driver now supports IPv6.</para>

      <para>Stealth forwarding now supports IPv6 as well as IPv4.
	This behavior can be controlled by using a new sysctl variable
	<varname>net.inet6.ip6.stealth</varname>.</para>

      <para>The <literal>PIM</literal> kernel option has been removed.
	The corresponding code is now included in the
	<literal>MROUTING</literal> kernel option.</para>

      <para>Support has been added for the RFC 3678 Source-Specific
	Multicast (SSM) socket API.  More details can be found in
	the &man.sourcefilter.3; manual page.</para>

      <para>Support has been added for the Stream Control Transmission
	Protocol (SCTP).  SCTP implements a reliable, message-oriented
	transport protocol, and is defined in RFC 4960.  It is enabled
	in &os; with the <literal>SCTP</literal> kernel option and is
	part of the <filename>GENERIC</filename> kernel.  More
	information can be found in the &man.sctp.4; manual page.</para>

      <para>The <literal>IPV6_V6ONLY</literal> socket option
	now works for UDP.</para>

      <para>The <literal>TCP_DROP_SYNFIN</literal> kernel option is now
	included in the kernel by default.  The
	<varname>net.inet.tcp.drop_synfin</varname> sysctl variable still
	defaults to <literal>0</literal>.</para>

      <para>The TCP bandwidth-delay product limiting feature has
	been disabled when the RTT is below a certain threshold.
	This optimization does not make sense on a LAN, as it has
	trouble figuring out the maximal bandwidth due to the coarse
	tick granularity.  A new sysctl variable
	<varname>net.inet.tcp.inflight.rttthresh</varname> specifies
	the threshold in milliseconds below which this feature
	will disengage.  It defaults to 10ms.  &merged;</para>

      <para>The &os; network stack now has support for TCP
	Segmentation Offload (TSO).  TSO reduces the overhead of
	sending bulk TCP data by allowing a network interface to
	convert a large data transfer into multiple TCP segments to be
	sent on the network.  This functionality can be enabled or
	disabled on a per-interface basis with
	the <literal>tso</literal> and <literal>-tso</literal> flags
	to &man.ifconfig.8;.  Network interfaces and drivers
	supporting TSO currently include &man.em.4;,
	&man.mxge.4; and &man.cxgb.4;.</para>

      <para>&os; now supports auto-sizing of TCP socket buffers.  This
	allows the socket buffer sizes to adapt dynamically to network
	conditions, rather than being set statically.  The behavior of
	this feature can be controlled using
	the <varname>net.inet.tcp.sendbuf_*</varname>
	and <varname>net.inet.tcp.recvbuf_*</varname> sysctl
	variables.</para>

      <para>The <varname>net.link.tap.up_on_open</varname> sysctl variable
	has been added to the &man.tap.4; driver.  If enabled, new tap
	devices will marked <literal>up</literal> upon creation.  &merged;
	</para>

      <para>Support for &man.kqueue.2; operations has been added to
	the &man.tun.4; driver. &merged;</para>

    </sect3>

    <sect3 id="disks">
      <title>Disks and Storage</title>

      <para>The &man.aac.4; driver now supports the Adaptec 2610SA SATA-RAID
	controller in some Hewlett-Packard machines.</para>

      <para>The performance of the &man.amr.4; driver has been improved;
	it also now supports full 64-bit DMA.  While this feature is
	enabled by default, this can be forced off by setting the
	<varname>hw.amr.force_sg32</varname> loader tunable for
	debugging purpose.
	&merged;</para>

      <para>The &man.amr.4; driver now supports the &man.ioctl.2; requests
	necessary for the Linux LSI MegaRaid tools in &os;'s Linux emulation
	environment.
	&merged;</para>

      <para>The &man.arcmsr.4; driver has been updated to version
	1.20.00.13. &merged;</para>

      <para>The &man.ahc.4; driver is now MPSAFE.</para>

      <para>The &man.ahd.4; driver is now MPSAFE.</para>

      <para>The &man.ata.4; driver now supports a workaround
	for some controllers whose DMA does not work properly
	in 48bit mode.  For affected controllers,
	PIO mode will be used for access to areas beyond 137GB.
	&merged;</para>

      <para>The &man.ata.4; driver now supports the ITE IT8211F IDE controller,
	and the Promise PDC40718 and PDC40719 chip found in Promise
	Fasttrak TX4300.
	&merged;</para>

      <para>The &man.ata.4; driver now supports DMA for kernel crash dumps,
	as well as crash dumping to an &man.ataraid.4; device.
	&merged;</para>

      <para>The &man.ata.4; driver now supports USB mass storage class
	devices.  To enable it, a line <literal>device atausb</literal>
	in the kernel configuration file or loading the
	<filename>atausb</filename> kernel module is needed.
	Note that this functionality cannot coexist with the
	&man.umass.4; driver. &merged;</para>

      <para>The &man.ataraid.4; driver now supports
	JMicron ATA RAID metadata.  &merged;</para>

      <para>The CAM subsystem is now MPSAFE.</para>

      <para>The &man.ciss.4; driver is now MPSAFE.</para>

      <para>A new <literal>GEOM_JOURNAL</literal> class has been added
	to the GEOM storage transformation system.  It supports
	block-level journaling operations, which can be used by file
	system modules to perform file system journaling and to keep
	file systems in a consistent state.  (Currently, only UFS file
	systems are supported.)  Its operation can be controlled using
	the &man.gjournal.8; utility.</para>

      <para>The <literal>GEOM_LABEL</literal> class now supports
	Ext2FS, NTFS, and ReiserFS.  &merged;</para>

      <para>The <literal>GEOM_MIRROR</literal> class now supports
	kernel crash dumps to the GEOM providers.
	&merged;</para>

      <para>The <literal>GEOM_MIRROR</literal> and <literal>GEOM_RAID3</literal>
	classes now support sysctl variables
	<varname>kern.geom.mirror.disconnect_on_failure</varname>
	and
	<varname>kern.geom.graid3.disconnect_on_failure</varname>
	to control whether failed components will be disconnected or not.
	The default value is <literal>1</literal> to preserve the current
	behavior, and if it is set to <literal>0</literal> such components
	are not disconnected and the kernel will try to still use them
	(only the first error will be logged).
	This is helpful for the case of multiple broken components (in
	different places), so actually all data is available.
	The broken components will be visible in <command>gmirror list</command>
	or <command>graid3 list</command> output with flag
	<literal>BROKEN</literal>.
	&merged;</para>

      <para>The <literal>GEOM_MIRROR</literal> and <literal>GEOM_RAID3</literal>
	classes now use parallel I/O requests for synchronization
	to improve the performance.  New sysctl variables
	<varname>kern.geom.mirror.sync_requests</varname> and
	<varname>kern.geom.raid3.sync_requests</varname>
	define how many parallel I/O requests should be used.
	Also, the sysctl variables
	<varname>kern.geom.mirror.reqs_per_sync</varname>,
	<varname>kern.geom.mirror.syncs_per_sec</varname>,
	<varname>kern.geom.raid3.reqs_per_sync</varname>, and
	<varname>kern.geom.raid3.syncs_per_sec</varname>
	are deprecated and have been removed.
	&merged;</para>

      <para>A new GEOM_MULTIPATH class has been added to support
	multiple access paths to disk devices.  The &man.gmultipath.8;
	utility has been added to control the behavior of disk devices
	using this feature.</para>

      <para>A new <literal>GEOM_VIRSTOR</literal> class has been added
	to provide virtual storage devices of arbitrary size with
	physical devices as backing store.  More information can be
	found in the manual page for its control utility,
	&man.gvirstor.8;.</para>

      <para>A new GEOM class <literal>GEOM_ZERO</literal> has been added.
	It creates a very huge provider (41PB) <filename>/dev/gzero</filename>
	and is mainly useful for performance testing.
	On <literal>BIO_READ</literal> request it zero-fills
	<varname>bio_data</varname> and on <literal>BIO_WRITE</literal>
	it does nothing.
	&merged;</para>

      <para>The GEOM class kernel module <filename>g_md.ko</filename>
	has been renamed to <filename>geom_md.ko</filename>
	for consistency.</para>

      <para>[&arch.amd64;, &arch.i386;] The &man.hptiop.4; driver has been added.
	It supports the Highpoint RocketRAID 3xxx series of controllers.</para>

      <para>[&arch.amd64;, &arch.i386;] The &man.hptmv.4; driver has been updated and now supports
	amd64 as well as PAE.</para>

      <para>The &man.isp.4; driver is now MPSAFE.</para>

      <para>The &man.mfi.4; driver, which supports
	the LSI MegaRAID SAS controller family, has been added.
	&merged;</para>

      <para>The &man.mpt.4; driver has been updated to support
	various new features such as RAID volume and RAID member
	state/settings reporting, periodic volume re-synchronization
	status reporting, and sysctl variables for volume
	re-synchronization rate, volume member write cache status,
	and volume transaction queue depth.  &merged;</para>

      <para>The &man.mpt.4; driver now supports SAS HBA (partially),
	64-bit PCI, and large data transfer.  &merged;</para>

      <para>The &man.mpt.4; driver is now MPSAFE.</para>

      <para>[&arch.amd64;, &arch.i386;] Experimental support for the
	TMPFS file system has been added.  TMPFS is an efficient
	memory file system originally developed for the NetBSD project
	during the Google Summer of Code.  More information can be
	found in the &man.tmpfs.5; manual page.</para>

      <para>The &man.twa.4; driver has been updated to the 3.70.03.007
	release on the 3ware Web site.  It now supports AMCC's 3ware
	9650 series of SATA controllers.  &merged;</para>

      <para>A new GEOM-based disk encryption facility, GEOM_ELI, has been
	added.  It uses the &man.crypto.9; framework for hardware acceleration
	and supports different cryptographic algorithms.  See &man.geli.8; for
	more information. &merged;</para>

      <para>The &man.geli.8; disk encryption system now supports loading keyfiles before the root
	file system is mounted.  &merged;
	For example, the following entries
	can be used in <filename>/boot/loader.conf</filename> to enable
	it:</para>

      <programlisting>geli_da0_keyfile0_load="YES"
geli_da0_keyfile0_type="da0:geli_keyfile0"
geli_da0_keyfile0_name="/boot/keys/da0.key0"
geli_da0_keyfile1_load="YES"
geli_da0_keyfile1_type="da0:geli_keyfile1"
geli_da0_keyfile1_name="/boot/keys/da0.key1"
geli_da0_keyfile2_load="YES"
geli_da0_keyfile2_type="da0:geli_keyfile2"
geli_da0_keyfile2_name="/boot/keys/da0.key2"

geli_da1s3a_keyfile0_load="YES"
geli_da1s3a_keyfile0_type="da1s3a:geli_keyfile0"
geli_da1s3a_keyfile0_name="/boot/keys/da1s3a.key"</programlisting>

      <para>&man.geli.8; is now able to perform data integrity
        verification (data authentication) of encrypted data stored on
        disk.  Note that the encryption algorithm is now specified to
        the &man.geli.8; control program using the <option>-e</option>
        option; the <option>-a</option> option is now used to specify
        the authentication algorithm. &merged;</para>

      <para>The &man.iscsi.initiator.4; driver, a kernel driver for
	the Internet SCSI (iSCSI) protocol, has been added.  This
	driver allows access to remote SCSI devices over TCP/IP
	networks.  The &man.iscontrol.8; userland utility is used
	to control the operation of the driver.</para>

      <para>The scsi_sg driver, which emulates a significant
	subset of the Linux SCSI SG passthrough device API, has
	been added.  It is
	intended to allow programs running under Linux emulation
	(as well as native &os; applications) to access the
	<filename>/dev/sg<replaceable>*</replaceable></filename>
	devices supported by Linux. &merged;</para>

      <para>The &man.umass.4; driver now supports
	<literal>PLAY_MSF</literal>,
	<literal>PLAY_TRACK</literal>,
	<literal>PLAY_TRACK_REL</literal>,
	<literal>PAUSE</literal>,
	<literal>PLAY_12</literal> commands so that
	the &man.cdcontrol.1; utility can handle a USB CD drive.</para>
    </sect3>

    <sect3 id="fs">
      <title>File Systems</title>

      <para>[&arch.amd64;, &arch.i386;, &arch.pc98;] The &man.linsysfs.5;
	pseudo-file system driver has been added.
	It provides a subset of the
	Linux <filename>sys</filename> file system, and is required for
	the correct operation of some Linux binaries (such as the LSI
	MegaRAID SAS utility). &merged;</para>

      <para>A part of the FreeBSD NFS subsystem (the interface with
	the protocol stack and callouts, the NFS client side) is now MPSAFE.</para>

      <para>The &man.pseudofs.9; pseudo file system construction kit and
	all of its consumers (&man.procfs.5;, &man.linprocfs.5; and
	&man.linsysfs.5;), are now MPSAFE.</para>

      <para>The unionfs file system has been re-implemented.  This
	version solves many crashing and locking issues compared to
	the previous implementation.  It also adds
	new <quote>transparent</quote> and <quote>masquerade</quote>
	modes for automatically creating files in the upper file system
	layer of unions.  More information can be found in the
	&man.mount.unionfs.8; manual page.  &merged;</para>

      <para>[&arch.amd64;, &arch.i386;, &arch.pc98;] Support for Sun's ZFS has been
	added.  More information about this file system can be found
	in the &man.zfs.8; manual page or
	on the <ulink url="http://www.opensolaris.org/os/community/zfs/">
	  OpenSolaris ZFS page</ulink>.</para>

      <para>Initial (read-only) support for SGI's XFS file system has been
	added.</para>
    </sect3>
  </sect2>

  <sect2 id="userland">
    <title>Userland Changes</title>

    <para>The addr2ascii() and ascii2addr() library calls, originally
      introduced by the INRIA IPv6 implementation, have been removed
      from <filename>libc</filename>.  They have no consumers in the
      &os; base system.  In a related change, support
      for <literal>AF_LINK</literal> addresses has been added to
      &man.getnameinfo.3;.</para>

    <para>Padding of <varname>ai_addrlen</varname>
      in <varname>struct addrinfo</varname> has been removed,
      which was originally for the ABI compatibility.
      For example, this change breaks the ABI compatibility of the
      &man.getaddrinfo.3; function on 64-bit architectures, including
      &os;/amd64, &os;/ia64, and &os;/sparc64.</para>

    <para>The &man.asf.8; utility has been revised and extended.  Now
      it can operate via several interfaces including &man.kvm.3;,
      which supports not only live systems, but also kernel crash dumps.
      &merged;</para>

    <para>The &man.arp.8; utility now allows the <option>-i</option>
      option together with the <option>-d</option> and <option>-a</option> options
      to allow all entries for a given interface to be removed. &merged;</para>

    <para>The &man.atrun.8; utility has gained PAM support.  Before
      running a job for a user account, it will check the account
      status with PAM and refuse to run the job if the account is
      unavailable.  The default definition of an unavailable account
      includes those expired and administratively locked out with
      &man.pw.8;.</para>

    <para>The OpenBSM userland tools, including &man.audit.8;,
      &man.auditd.8;,
      &man.auditreduce.1;, and
      &man.praudit.1;, have been added. &merged;</para>

    <para>The &man.bsdiff.1; and &man.bspatch.1; utilities
      have been added.  These are tools for constructing and
      applying binary patches.  &merged;</para>

    <para>The &man.bsnmpd.1; utility now supports the Host Resources
      MIB described in RFC 2790.  &merged;</para>

    <para>The &man.camcontrol.8; utility now supports
      a <command>readcap</command> command to display the size of
      devices. &merged;</para>

    <para>The &man.cmp.1; utility now supports an <option>-h</option>
      flag to compare the symbolic link itself rather than the
      file that the link points to. &merged;</para>

    <para>The &man.config.8; utility now supports the <literal>nocpu</literal>
      directive, which cancels the effect of a
      previous <literal>cpu</literal> directive.  &merged;</para>

    <para>The &man.config.8; utility now reads <filename>DEFAULTS</filename>
      kernel configuration file if it exists in the current directory
      before the specified configuration file.  &merged;</para>

    <para>The &man.cp.1; utility now supports a <option>-l</option>
      option, which causes it to create hardlinks to the source files
      instead of copying them. &merged;</para>

    <para>The &man.cron.8; daemon has gained PAM support.  Before
      running a command from account's private &man.crontab.5; file,
      it will check the account status with PAM and skip the command
      if the account is unavailable.  The default definition of an
      unavailable account includes those expired and administratively
      locked out with &man.pw.8;.  In addition, &man.cron.8; will
      skip commands from private &man.crontab.5; files if a
      &man.nologin.5; file exists, unless the &man.crontab.5; owner's
      login class is exempt from &man.nologin.5; restriction.
      Commands from the system file <filename>/etc/crontab</filename>
      are not subject to the PAM check.</para>

    <para>The &man.csh.1; utility now supports NLS catalogs.
      Note that this requires installing
      the <filename role="package">shells/tcsh_nls</filename> port.
      &merged;</para>

    <para>The &man.csup.1; utility has been imported.
      This is an implementation of a CVSup-compatible client written
      in the C language.  Note that it currently supports checkout mode
      only. &merged;</para>

    <para>The &man.dhclient.8; program now supports the Classless Static
      Route option as described in RFC 3442.</para>

    <para>The &man.dhclient.8; program now sends the host's name in
      DHCP requests if it is not specified in the configuration
      file. &merged;</para>

    <para>The &man.devd.8; utility now supports a <option>-f</option> option
      to specify a configuration file.  &merged;</para>

    <para>The &man.du.1; program now supports a <option>-n</option>
      flag, which causes it to ignore files and directories with
      the <literal>nodump</literal> flag set. &merged;</para>

    <para>The &man.dump.8; and &man.restore.8; programs now attempt to
      save and restore extended attribute information on files.</para>

    <para>A <application>libelf</application> library implementing
      the SVR4 &man.elf.3; / &man.gelf.3; API for manipulating ELF files
      has been added.</para>

    <para>The &man.fdisk.8; program now supports a <option>-p</option>
      flag to print the slice table in fdisk configuration format.</para>

    <para>The &man.fsdb.8; utility now supports changing the birth
      time of files on UFS2 file systems using the new 
      <literal>btime</literal> command. &merged;</para>

    <para>The &man.fsdb.8; program now supports
      a <literal>findblk</literal> command, which finds the inode(s)
      owning a specific disk block. &merged;</para>

    <para>The &man.find.1; program now supports <option>-Btime</option>
      and other related primaries, which can be used to create expressions
      based on a file's creation time. &merged;</para>

    <para>T/TCP support in &man.finger.1; (and the <option>-T</option>
      flag used to enable it) has been removed.</para>

    <para>A bug in the &man.find.1; program which prevents
      numeric arguments for <option>-user</option> and
      <option>-group</option> from working as expected
      has been fixed.</para>

    <para>The &man.freebsd-update.8; utility, a tool for managing
      binary updates to the &os; base system, has been added. &merged;</para>

    <para>The &man.ftpd.8; utility now creates a PID file
      <filename>/var/run/ftpd.pid</filename> even when
      no <option>-p</option> option is specified.  &merged;</para>

    <para>The &man.ftpd.8; utility now has support for RFC2389 (FEAT)
      and rudimentary support for RFC2640 (UTF8).  The RFC2640 support
      is optional and can be enabled using the new <option>-8</option>
      flag.  More information can be found in the &man.ftpd.8; manual
      page.  &merged;</para>

    <para>The &man.gcc.1; SSP (Stack-Smashing Protector) support is now
      enabled by default.</para>

    <para>The &man.gbde.8; utility now supports
      <option>-k</option> and <option>-K</option> options
      to specify a key file in addition to a passphrase.</para>

    <para>The &man.getfacl.1; utility now supports
      a <option>-q</option> flag to suppress the per-file header
      comment listing the file name, owner, and group.
      &merged;</para>

    <para>The &man.getent.1; utility has been imported from NetBSD.
      It retrieves and displays information from an administrative
      database (such as <filename>hosts</filename>) using the lookup
      order specified in &man.nsswitch.conf.5;. &merged;</para>

    <para>The &man.gpt.8; utility now supports setting GPT partition labels.</para>

    <para>The &man.gvinum.8; utility now supports commands
      to rename objects and to move a subdisk from
      one drive to another.  &merged;</para>

    <para>The &man.gvinum.8; utility now supports the
      <command>resetconfig</command> sub-command.</para>

    <para>An implementation of Generic Security Service API (GSS-API)
      version 2 and its C binding described in RFC2743 and RFC2744
      has been added.  This is a new extensible GSS-API layer which
      can support GSS-API plugins, similar the the Solaris
      implementation, and the Kerberos 5 GSS mechanism has
      been rewritten as a plugin library for the new implementation.</para>

    <para>The &man.hccontrol.8; utility now supports HCI node
      autodetection.</para>

    <para>The &man.id.1; utility now prints the effective user
      ID after the group ID.</para>

    <para>The &man.id.1; utility now supports a <option>-A</option>
      flag to print process audit properties, including the audit user
      id. &merged;</para>

    <para>The &man.ifconfig.8; utility now supports
      a <option>-k</option> flag to allow printing
      potentially sensitive keying material to standard output.
      This sensitive information will not be printed by default.
      &merged;</para>

    <para>The &man.ifconfig.8; utility now supports a <option>-tunnel</option>
      parameter, which is just an alias for <option>deletetunnel</option>,
      yet is more convenient and easier to type. &merged;</para>

    <para>The <option>-vlandev</option> parameter to &man.ifconfig.8;
      no longer requires a network interface as its argument.  The
      argument still is supported for backward compatibility, but
      is now deprecated and its use is discouraged. &merged;</para>

    <para>The &man.iostat.8; utility now supports
      a <option>-x</option> flag (inspired by Solaris) to print
      extended disk statistics.  If the new <option>-z</option> flag is
      also specified, no output is made for disks with no
      activity. &merged;</para>

    <para>The &man.ipfwpcap.8; utility has been added; it captures
      packets on a &man.divert.4; socket and writes them as
      &man.pcap.3; (also known as &man.tcpdump.1;) format data to a
      file or pipe.</para>

    <para>The &man.jail.8; utility supports a <option>-J
	<replaceable>jid_file</replaceable></option> option to
      write out a JidFile, similar to a PidFile, containing
      the jailid, path, hostname, IP and the command used to start
      the jail.  &merged;</para>

    <para>The &man.jail.8; program now supports a <option>-s</option>
      option to specify a jail's securelevel. &merged;</para>

    <para>The &man.jexec.8; utility now supports <option>-u</option>
      and <option>-U</option> flags to specify username credentials
      under which a command should be executed. &merged;</para>

    <para>The &man.kdump.1; program now supports a <option>-H</option>
      flag, which causes kdump to print an additional field holding
      the threadid.  &merged;</para>

    <para>The &man.kdump.1; program now supports a <option>-s</option>
      flag to suppress the display of I/O data.  &merged;</para>

    <para>The &man.kdump.1; program now supports printing
      flags in a system call argument by using symbol names.</para>

    <para>The &man.kenv.1; utility now supports a <option>-q</option>
      flag to suppress warnings.</para>

    <para>&man.kgdb.1; now supports a <option>-w</option>
      option to open kmem-based targets in read-write mode.
      This allows one to use kgdb on <filename>/dev/mem</filename>
      and be able to patch memory on a live system.</para>

    <para>The &man.libarchive.3; library now supports
      POSIX.1e-style Extended Attributes.</para>

    <para>The &man.libarchive.3; library now contains support for
      &man.ar.1;-style archives.</para>

    <para>The <application>libc</application> library now includes
      initial implementation of symbol maps and symbol version
      definitions.</para>

    <para>The <application>libedit</application> library has been
      updated from the NetBSD source tree as of August 2005.</para>

    <para>The <application>libm</application> library now includes
      initial implementation of symbol maps and symbol version
      definitions.</para>

    <para>The &man.libmemstat.3; library has been added.
      This is for use by debugging and monitoring applications
      in tracking kernel memory statistics.  It provides an
      abstracted interface to &man.uma.9; and &man.malloc.9;
      statistics, wrapped around the binary stream sysctl variables
      for the allocators. &merged;</para>

    <para>The &man.ln.1; utility now supports
      an <option>-F</option> flag, which deletes existing
      empty directories when creating symbolic links.
      &merged;</para>

    <para>The &man.locate.1; utility now supports
      a <option>-0</option> flag to make this utility
      interoperable with &man.xargs.1;'s <option>-0</option> flag.
      &merged;</para>

    <para>The &man.logger.1; utility now supports
      a <option>-P</option>, which specifies the port to which syslog
      messages should be sent. &merged;</para>

    <para>The &man.ls.1; utility now supports
      an <option>-I</option> flag to disable the automatic
      <option>-A</option> flag for the superuser.  &merged;</para>

    <para>The &man.ls.1; utility now supports
      an <option>-U</option> flag to use the file creation
      time for sorting. &merged;</para>

    <para>A new &man.malloc.3; implementation has been introduced.
      This implementation, sometimes referred to
      as <quote>jemalloc</quote>, was designed to improve the
      performance of multi-threaded programs, particularly on SMP
      systems, while preserving the performance of single-threaded
      programs.  Due to the use of different algorithms and data
      structures, jemalloc may expose some previously-unknown bugs in
      userland code, although most of the &os; base system and common
      ports have been tested and/or fixed.  Note that jemalloc uses
      &man.mmap.2; to obtain memory and only uses &man.sbrk.2; under
      limited circumstances (and then only for 32-bit architectures).
      As a result, the <literal>datasize</literal> resource limit
      has little practical effect for typical applications.  The
      <literal>vmemoryuse</literal> resource limit, however, can be
      used to bound the total virtual memory used by a process, as
      described in &man.limits.1;.</para>

    <para>The &man.mdconfig.8; utility now supports producing
      device listings formatted as XML.  Currently, the
      <command>list</command> and <command>query</command>
      sub-commands support this feature.</para>

    <para>The &man.mdconfig.8; utility's <option>-u</option> option
      now supports specifying multiple devices separated
      by comma character.</para>

    <para>The &man.mdmfs.8; utility now supports a <option>-P</option> flag
      to allow skipping the &man.newfs.8; process
      when using a vnode-backed disk.</para>

    <para>The &man.mdmfs.8; utility now supports a <option>-E</option> flag
      to allow to specify location of the &man.mdconfig.8;
      utility instead of using the default one
      (<filename>/sbin/mdconfig</filename>).</para>

    <para>A new function &man.memmem.3; has been implemented in
      <filename>libc</filename>.  This is the binary equivalent to
      &man.strstr.3; and found in <filename>glibc</filename>.</para>

    <para>The &man.mergemaster.8; utility now supports
      an <option>-A</option> option to explicitly specify
      an architecture to pass through to the underlying makefiles.
      &merged;</para>

    <para>The &man.mount.8; <literal>dev</literal>
      and <literal>nodev</literal> options have
      been removed.</para>

    <para>The &man.mount.8; utility now supports &man.mqueuefs.5;.</para>

    <para>A bug which prevents the &man.mount.8; utility from converting
      a read-only mount to read-write via <command>mount -u -o rw</command>,
      has been fixed.</para>

    <para>The &man.mount.8; utility now supports a
      <literal>late</literal> keyword in &man.fstab.5;, along with a
      corresponding <option>-l</option> command-line option to specify
      that these <quote>late</quote> file systems should be
      mounted. &merged;</para>

    <para>A number of the file
      system-specific <command>mount_<replaceable>*</replaceable></command>
      utilities have been removed, in favor of the more general
      &man.mount.8; command with a <option>-t</option> option.
      Specifically, these commands are:
      <command>mount_devfs</command>,
      <command>mount_ext2fs</command>,
      <command>mount_fdescfs</command>,
      <command>mount_linprocfs</command>,
      <command>mount_procfs</command>,
      <command>mount_std</command>,
      <command>mount_linsysfs</command>,
      <command>mount_reiserfs</command>, and
      <command>mount_umapfs</command>.
      </para>

    <para>The &man.moused.8; daemon now supports an <option>-H</option> flag
      to enable horizontal virtual scrolling similar to the
      <option>-V</option> flag for vertical virtual scrolling.
      &merged;</para>

    <para>The mrouted(8) multicast routing daemon has been removed
      from the &os; base system.  It implements the DVMRP multicast
      routing protocol, which has largely been replaced by PIM in many
      multicast installations.  The related map-mbone(8) and mrinfo(8)
      utilities have also been removed.  These programs are now
      available in the &os; Ports Collection
      as <filename role="package">net/mrouted</filename>.</para>

    <para>The &man.netstat.1; utility now supports an
      <option>-h</option> flag for interface stats mode,
      which prints all interface statistics in human readable form. &merged;</para>

    <para>The &man.netstat.1; utility now supports
      printing &man.ipsec.4; protocol statistics.
      Note that the output of <command>netstat -s -p ipsec</command>
      differs depending on which stack is compiled into
      the kernel since they each keep different statistics.  &merged;</para>

    <para>The &man.netstat.1; utility now supports printing
      &man.sctp.4; protocol statistics.</para>

    <para>The <filename>/etc/nsswitch.conf</filename> file is now
      installed statically instead of being generated on every
      reboot.</para>

    <para>The objformat(1) utility and getobjformat(3) library (the
      last remnants of a.out object file support) have been removed.</para>

    <para>The &man.pam.nologin.8; module no longer provides
      an authentication function; instead it now provides an account
      management function.  Third-party files in
      <filename>/usr/local/etc/pam.d</filename> may  
      need manual editing; specifically, lines in these files of
      the form:

      <screen>auth    required        pam_nologin.so  no_warn</screen></para>

    <para>These lines need to have the word <literal>auth</literal>
      replaced with the word <literal>account</literal>.</para>

    <para>&man.nscd.8; has been added.  It is a daemon that caches
      the results of nsswitch lookups (such as those to the password,
      group, and services databases) for improved performance.</para>

    <para>The &man.periodic.8; daily script now supports
      display of the status of &man.gmirror.8;, &man.graid3.8;,
      &man.gstripe.8;, and &man.gconcat.8; devices.
      Note that these are disabled by default.  &merged;</para>

    <para>A new function, &man.pidfile.3;, which provides reliable
      pidfiles handling, has been implemented in
      <filename>libutil</filename>.  &merged;</para>

    <para>The &man.ping.8; utility now supports a <quote>sweeping
	ping</quote> in which &man.icmp.4; payload of
      packets being sent is increased with given step.
      This is useful for testing problematic channels, MTU issues
      or traffic policing functions in networks.  &merged;</para>

    <para>The &man.ping.8; command now supports a <option>-W</option>
      option to specify the maximum time to wait for an echo reply.
      &merged;</para>

    <para>The &man.pkill.1; utility now supports a
      <option>-F</option> option which allows to
      restrict matches to a process whose PID is stored in the
      pidfile file.  When another new option <option>-L</option>
      is also specified, the pidfile file must be locked with the
      &man.flock.2; syscall or created with &man.pidfile.3;.</para>

    <para>The &man.pkill.1; utility now supports a
      <option>-I</option> flag which works like <option>-i</option>
      of &man.rm.1;.  When this flag is specified, &man.pkill.1;
      will ask for confirmation before sending a signal to
      each matching process.</para>

    <para>The &man.pkill.1; utility (also known as &man.pgrep.1;) has
      been moved from <filename>/usr/bin</filename>
      to <filename>/bin</filename> so that it can be used by startup
      scripts.  Symbolic links from its former location have been
      created for backward compatibility. &merged;</para>

    <para>The &man.pmcstat.8; program has seen several enhancements:
      It can now log over a network socket to a remote host.  The
      <option>-c</option> now takes a comma-seperated list of CPUs
      to configure for PMC allocation.  The <option>-t</option> option
      has been enhanced to take a regular expression for selecting
      processes based on their command names.  &man.pmcstat.8; now
      allocates system PMCs on all CPUs by default, not just CPU 0.</para>

    <para>The &man.powerd.8; program now supports a
      <option>-P</option> option, which specifies a pidfile to use.</para>

    <para>An extensible implementation of &man.printf.3;, compatible
      with GLIBC, has been added to <filename>libc</filename>.  It is
      only used if the environment variable
      <varname>USE_XPRINTF</varname> is defined, one of the extension
      functions is called, or the global variable
      <varname>__use_xprintf</varname> is set to a value greater than
      <literal>0</literal>.  Five extensions are currently supported:
      <literal>%H</literal> (hex dump),
      <literal>%T</literal> (<varname>time_t</varname> and
      time-related structures),
      <literal>%M</literal> (errno message),
      <literal>%Q</literal> (double-quoted, escaped string),
      <literal>%V</literal> (&man.strvis.3;-format string),
      &merged;</para>

    <para>The &man.pw.8; program now supports a <option>-M</option>
      option to set the permissions of a user's newly created home
      directory.  &merged;</para>

    <para>The DNS resolver library in &os;'s <application>libc</application>
      has been updated to that from BIND 9.4.1.</para>

    <para>The &man.rfcomm.sppd.1; program now supports service names
      in addition to <option>-c</option> option with channel number.
      The supported names are: DUN (Dial-Up Networking), FAX (Fax),
      LAN (LAN Access Using PPP), and SP (Serial Port).  &merged;</para>

    <para>The &man.rpcbind.8; program can now bind its TCP listening
      socket to an IP address other than INADDR_ANY using the
      <option>-h</option> flag.  The new <option>-6</option> flag allows
      it to bind to IPv6 addresses only.</para>

    <para>The &man.rpcgen.1; utility now generates headers and stub files
      that can be used with ANSI C compilers by default.</para>

    <para>The &man.rpc.lockd.8; and &man.rpc.statd.8; programs now
      accept <option>-p</option> options to indicate which port they
      should bind to. &merged;</para>

    <para>The &man.rtld.1; runtime linker now supports ELF symbol versioning
      using GNU semantics.  This implementation aims to be compatible
      with symbol versioning support as implemented by GNU libc and
      documented in <ulink url="http://people.redhat.com/~drepper/symbol-versioning"></ulink>
      and LSB 3.0.  Also, <function>dlvsym()</function>
      function has been added to
      allow lookups for a specific version of a given symbol.</para>

    <para>The &man.sa.8; utility now supports <option>-U</option>
      and <option>-P</option> flags.  They can be used to specify
      the per-user and per-process summary file location,
      respectively.</para>

    <para>A bug in the &man.sed.1; utility which can cause
      incorrect calculation of pattern space length in some cases
      has been fixed.</para>

    <para>The &man.sed.1; utility now supports case-insensitive
      pattern matching; this feature can be enabled by using
      the <literal>I</literal> flag after the closing delimiter for a
      regular expression.</para>

    <para>The behavior of the &man.setenv.3; family of library calls
      has been changed from the historic BSD API to the
      behavior mandated by POSIX.  As a result, several base system
      utility that relied on the old API have been updated to track
      this change.</para>

    <para>The <option>-h</option> flag to &man.setfacl.1; now properly
      sets the ACL on a symbolic link, not the link target.</para>

    <para>The &man.sh.1; utility now supports a <literal>times</literal>
      built-in command. &merged;</para>

    <para>The &man.snapinfo.8; utility, which shows snapshot locations
      on UFS file systems, has been added.  &merged;</para>

    <para>The &man.sockstat.1; utility, which shows connected and
      listening network sockets, now supports a new <option>-P</option>
      command-line option, which can be used to filter displayed sockets
      by protocol name (as listed in &man.protocols.5;).</para>

    <para>The &man.strtonum.3; library function has been implemented
      based on OpenBSD's implementation.  This is an improved version of
      &man.strtoll.3;.  &merged;</para>

    <para>The &man.sysctl.8; utility now supports a <option>-q</option>
      flag to suppress a limited set of warnings and errors.</para>

    <para>The &man.tail.1; utility now supports a <option>-q</option>
      flag to suppress header lines when multiple files are
      specified. &merged;</para>

    <para>The version of tcpslice in the &os; base system has been
      removed due to obsolescence.  A more up-to-date version can be
      found in the Ports Collection
      as <filename role="package">net/tcpslice</filename>.</para>

    <para>The &man.time.1; utility now prints the time that a given
      command has been running if sent a <literal>SIGINFO</literal> signal.</para>

    <para>The &man.top.1; program now supports a <option>-a</option>
      flag to display process titles from their argument vectors;
      this feature is useful for watching processes that change their
      titles via &man.setproctitle.3;.</para>

    <para>The &man.top.1; program now supports a <option>-j</option>
      flag to display the &man.jail.8; ID for each process.  &merged;</para>

    <para>The &man.touch.1; utility now supports a <option>-A</option>
      flag that allows the access and modification times of a file to be
      adjusted by a specified value.  &merged;</para>

    <para>The &man.traceroute.8; program now supports
      a <option>-D</option> flag, which causes it to display the
      differences between the sent and received
      packets. &merged;</para>

    <para>The &man.traceroute.8; utility now supports
      a <option>-e</option> option, which sets a fixed destination
      port for probe packets.  This can be useful for tracing behind
      packet-filtering firewalls. &merged;</para>

    <para>&man.traceroute.8; now decodes the complete set of ICMP
      unreachable messages in its output. &merged;</para>

    <para>The &man.truss.1; utility now supports an <option>-s</option>
      flag for the same functionality as the strace utility
      (<filename role="package">devel/strace</filename>).</para>

    <para>The &man.truss.1; utility no longer depends on the availability
      of the &man.procfs.5; file system; it uses the &man.ptrace.2;
      interface instead for controlling a traced process.</para>

    <para>[&arch.powerpc;] The &man.truss.1; utility now supports &os;/powerpc.</para>

    <para>The usbd(8) utility has been removed.
      The &man.devd.8; utility and its configuration
      file now support functionality which is equivalent to it.</para>

    <para>The &man.uuidgen.1; utility has been moved from
      <filename>/usr/bin</filename> to <filename>/bin</filename>.</para>

    <para>The vnconfig(8) utility, which was long ago replaced by
      &man.mdconfig.8;, has been removed.</para>

    <para>The wicontrol(8) utility has been removed.  Configuration
      functions for &man.wi.4; interfaces should be performed using
      &man.ifconfig.8;.</para>

    <para>The &man.xargs.1; utility now supports a <option>-r</option>
      flag which makes the command execution when the standard input
      does not contain any non-whitespace-characters.  &merged;</para>

    <para>The shared library version number of all libraries has
      been updated due to some possible ABI changes.  The libraries
      include: snmp_<replaceable>*</replaceable>, libdialog, libg2c, libobjc,
      libreadline, libregex, libstdc++, libkrb5, libalias, libarchive,
      libbegemot, libbluetooth, libbsnmp, libbz2, libc_r, libcrypt,
      libdevstat, libedit, libexpat, libfetch, libftpio, libgpib,
      libipsec, libkiconv, libmagic, libmp, libncp, libncurses,
      libnetgraph, libngatm, libopie, libpam, libpthread, libradius,
      libsdp, libsmb, libtacplus, libthr, libthread_db, libugidfw,
      libusbhid, libutil, libvgl, libwrap, libypclnt, libm, libcrypto,
      libssh, and libssl.</para>

    <para>The <function>wcsdup()</function> function has been
      implemented.  This function is popular in Microsoft and GNU
      systems.</para>

    <para>The &man.wlandebug.8; utility has been added to the main
      &os; source tree (it previously lived in a tools area).  It
      provides control over a number of types of debugging output
      in the &man.wlan.4; module and related drivers, and can be
      useful for debugging wireless issues.</para>

    <para>The &man.wpa.passphrase.8; utility has been added.  It
      generates a 256-bit pre-shared WPA key from an ASCII
      passphrase. &merged;</para>

    <para>The compiler toolchain is now capable of generating
      executables for systems using the ARM processor. &merged;</para>

    <sect3 id="rc-scripts">
      <title><filename>/etc/rc.d</filename> Scripts</title>

      <para>The <filename>auditd</filename> script for
	OpenBSM &man.auditd.8; has been added. &merged;</para>

      <para>The <filename>bluetooth</filename> script
	has been added.  This script will be called from
	&man.devd.8; in response to device attachment/detachment
	events and to stop/start particular device without unplugging
	it by hand.  The configuration parameters are in
	<filename>/etc/defaults/bluetooth.device.conf</filename>,
	and can be overridden by using
	<filename>/etc/bluetooth/<replaceable>$device</replaceable>.conf</filename>
	(where <replaceable>$device</replaceable> is <devicename>ubt0</devicename>,
	<devicename>btcc0</devicename>, and so on.)
	For more details, see &man.bluetooth.conf.5;.  &merged;</para>

      <para>The <filename>ftpd</filename> script for
	stand-alone &man.ftpd.8; has been added.</para>

      <para>The <filename>gbde_swap</filename> script has
	been removed in favor a new <filename>encswap</filename>
	script which also supports &man.geli.8; for swap
	encryption.</para>

      <para>The <filename>geli</filename> and <filename>geli2</filename>
	scripts has been added for &man.geli.8; device
	configuration on boot.</para>

      <para>The <filename>ike</filename> script for
	IPsec IKE daemon has been removed because no such daemon
	is included in the base system.</para>

      <para>The <filename>hcsecd</filename> and
	<filename>sdpd</filename> scripts have been added
	for &man.hcsecd.8; and &man.sdpd.8; daemons.
	These daemons can run even if no Bluetooth devices
	are attached to the system, but both daemons depend on
	Bluetooth socket layer and thus disabled by default.
	Bluetooth sockets layer must be either loaded
	as a module or compiled into kernel before the daemons can run.
	&merged;</para>

      <para>The <filename>hostapd</filename> script for
	&man.hostapd.8; has been added.  &merged;</para>

      <para>The <filename>mdconfig</filename> script to
	handle vnode backed &man.md.4; devices has been added.
	This is a replacement of the <filename>ramdisk</filename>
	script, and all of variables in <varname>ramdisk_*</varname>
	have been changed to <varname>mdconfig_*</varname>.
	Also, two new &man.rc.conf.5; variables
	<varname>mdconfig_<replaceable>*</replaceable>_files</varname>
	and
	<varname>mdconfig_<replaceable>*</replaceable>_cmd</varname>
	have been added.  For example:</para>

      <programlisting>mdconfig_md0="-t malloc -s 10m"
mdconfig_md1="-t vnode -f /var/foo.img"</programlisting>

      <para>The <filename>netif</filename> script now supports
	<varname>ipv4_addrs_<replaceable>ifn</replaceable></varname>
	variables,
	which add one or more IPv4 address from a ranged list in
	CIDR notation.  &merged;  For example:</para>

      <programlisting>ipv4_addrs_ed0="192.168.0.1/24 192.168.1.1-5/28"</programlisting>

      <para>The <filename>rcconf.sh</filename> script in <filename>/etc/rc.d</filename>
	has been removed and a variable <varname>early_late_divider</varname>,
	which designates the script to separate the early and late stages
	of the boot process, has been added.</para>

      <para>The <filename>rc.initdiskless</filename> script now uses &man.tar.1;
	instead of &man.pax.1; because &man.pax.1; needs a writable
	temporary directory that may not be available when this script
	runs.</para>

      <para>The <filename>pccard</filename> script has been removed
	since OLDCARD is deprecated.</para>

      <para>The <filename>ppp-user</filename> script has been renamed to
	<filename>ppp</filename>.  &merged;</para>

      <para>The <filename>sendmail</filename> script no longer rebuilds
	the aliases database if it is missing or older than the aliases
	file.  If desired, set the new rc.conf option
	<varname>sendmail_rebuild_aliases</varname> to "YES" to restore
	that functionality.</para>

      <para>The <varname>removable_interfaces</varname> variable
	has been removed.</para>

      <para>A new keyword <literal>NOAUTO</literal> in
	<varname>ifconfig_<replaceable>ifn</replaceable></varname>
	has been added. This prevents configuration of an interface
	at boot time or via <filename>/etc/pccard_ether</filename>,
	and allows <filename>/etc/rc.d/netif</filename>
	to be used to start and stop an interface
	on a purely manual basis.</para>
    </sect3>
  </sect2>

  <sect2 id="contrib">
    <title>Contributed Software</title>

    <para><application>Intel ACPI-CA</application>
      has been updated to 20070320.</para>

    <para><application>awk</application> has been updated from the 24
      April 2005 release to the 1 May 2007 release.</para>

    <para><application>BIND</application> has been updated from 9.3.1
      to 9.4.1-p1.</para>

    <para><application>BSNMPD</application> has been updated from
      1.11 to 1.12.</para>

    <para><application>BZIP2</application> has been updated from
      1.0.3 to 1.0.4.
      &merged;</para>

    <para>GNU <application>Diffutils</application> has been updated
      from 2.7 to 2.8.7.
      &merged;</para>

    <para><application>DRM</application> has
      been updated to a snapshot from DRI CVS as of 20060517.
      &merged;</para>

    <para>The Forth Inspired Command Language (<application>FICL</application>)
      used in the boot loader has been updated to 3.03.</para>

    <para><application>FILE</application> has been updated from 4.12
      to 4.21.</para>

    <para>The GNU version of <application>gzip</application> has been
      replaced with a modified version of gzip ported from NetBSD.
      &merged;</para>

    <para><application>netcat</application> has been updated from the
      version in a 4 February 2005 OpenBSD snapshot to the version
      included in OpenBSD 4.1.  &merged;</para>

    <para><application>GCC</application> has been updated from 3.4.4
      to 4.2.1.</para>

    <para><application>GNU Readline library</application> has been
      updated from 5.0 to 5.2 patch 2. &merged;</para>

    <para><application>GNU Troff</application>
      has been updated from version 1.19 to version 1.19.2.
      &merged;</para>

    <para><application>IPFilter</application> has been updated from
      4.1.8 to 4.1.23.</para>

    <para><application>less</application> has been updated from v381
      to v406. &merged;</para>

    <para><application>libpcap</application> has been updated from
      0.9.1 to 0.9.4. &merged;</para>

    <para><application>lukemftpd</application> has been updated from a
      snapshot from NetBSD as of 9 August 2004 to a snapshot from
      NetBSD as of 31 August 2006. &merged;</para>

    <para><application>OpenSSH</application> has been updated from
      4.2p1 to 4.5p1. &merged;</para>

    <para><application>OpenSSL</application> has been updated from
      0.9.7e to 0.9.8e.</para>

    <para><application>ncurses</application> has been updated from
      5.2-20020615 to 5.6-20061217.  ncurses now also has wide
      character support.  &merged;</para>

    <para><application>hostapd</application>
      has been updated from version 0.3.9 to version 0.5.8.
      </para>

    <para><application>PF</application> has been updated from OpenBSD
      version 3.7 to OpenBSD version 4.1.</para>

    <para><application>sendmail</application> has been updated from
      8.13.4 to 8.14.1.  &merged;</para>

    <para><application>tcpdump</application> has been updated from
      3.9.1 to 3.9.4. &merged;</para>

    <para>The timezone database has been updated from the
      <application>tzdata2005l</application> release to the
      <application>tzdata2007g</application> release. &merged;</para>

    <para><application>tip</application> has been updated to a
      snapshot from OpenBSD as of 20060831.</para>

    <para>TrustedBSD <application>OpenBSM</application>,
      version 1.0 alpha 15, an implementation of the documented Sun Basic
      Security Module (BSM) Audit API and file format, as well as local
      extensions to support the Mac OS X and &os; operating systems
      has been added.  This also includes command line tools for audit
      trail reduction and conversion to text and XML, as well as
      documentation of the commands, file format, and APIs.
      For this functionality, the <literal>AUDIT</literal> kernel option,
      <filename>/var/audit</filename> directory, and
      <literal>audit</literal> group have been added. &merged;</para>

    <para><application>WPA Supplicant</application>
      has been updated from version 0.3.9 to version 0.5.8.
      </para>

    <para><application>zlib</application>
      has been updated from version 1.2.2 to version 1.2.3. &merged;</para>
  </sect2>

  <sect2 id="ports">
    <title>Ports/Packages Collection Infrastructure</title>

    <para>&man.pkg.add.1; now supports an <option>-F</option>
      flag to disable checking whether the same package is already
      installed or not. &merged;</para>

    <para>The &man.pkg.add.1; program now supports an <option>-P</option>
      flag, which is the same as the <option>-p</option> flag
      except that the given prefix is also used recursively for the
      dependency packages if any.  &merged;</para>

    <para>The &man.pkg.add.1; and &man.pkg.create.1; utilities now support
      a <option>-K</option> flag to save packages to the current directory
      (or <varname>PKGDIR</varname> if defined) by default.
      &merged;</para>

    <para>The &man.pkg.create.1; program now supports an <option>-x</option>
      flag to support basic regular expressions for package name,
      an <option>-E</option> flag for extended regular
      expressions, and a <option>-G</option> for exact matching.  &merged;</para>

    <para>The &man.pkg.version.1; utility now supports an <option>-o</option>
      flag to show the origin recorded on package generation
      instead of the package name, and an <option>-O</option> flag
      to list packages with a specific registered origin.
      &merged;</para>

    <para>The &man.portsnap.8; utility (<filename>sysutils/portsnap</filename>)
      has been added into the &os; base system.  This is a secure,
      easy to use, fast, lightweight, and generally good way for
      users to keep their ports trees up to date.  &merged;</para>

    <para>A incorrect handling of <varname>HTTP_PROXY_AUTH</varname>
      in the &man.portsnap.8; utility has been fixed.  &merged;</para>

    <para>The startup scripts from the <varname>local_startup</varname>
      directory now evaluated by using &man.rcorder.8; with scripts
      in the base system.  &merged;</para>

    <para>The suffix of startup scripts from the Ports Collection
      has been removed.  This means <filename>foo.sh</filename>
      is renamed to <filename>foo</filename>, and now
      scripts whose name is something like
      <filename>foo.ORG</filename> will also be invoked.
      You are recommended to reinstall packages which install
      such scripts and remove extra files in the
      <varname>local_startup</varname> directory.  &merged;</para>

    <para>New <filename>rc.conf</filename> variables,
      <varname>ldconfig_local_dirs</varname> and
      <varname>ldconfig_local32_dirs</varname> have been added.
      These hold lists of local &man.ldconfig.8; directories.
      &merged;</para>

    <para>The <command>@cwd</command> command in
      <filename>pkg-plist</filename> now allows
      the case where no directory argument is given.  If no
      directory argument is given, it will set current
      working directory to the first prefix given by the
      <command>@cwd</command> command.  &merged;</para>
  </sect2>

  <sect2 id="releng">
    <title>Release Engineering and Integration</title>

    <para>The default partition sizing algorithm of the
      &man.sysinstall.8; utility has been changed.</para>

    <itemizedlist>
      <listitem>
	<para>On systems where the disk capacity is larger than (3 * RAMsize + 10GB),
	  the default sizes will now be as follows:</para>

	<informaltable frame="none" pgwide="0">
	  <tgroup cols="2">
	    <colspec colwidth="1*">
	    <colspec colwidth="2*">
	    <thead>
	      <row>
		<entry>Partition</entry>
		<entry>Size</entry>
	      </row>
	    </thead>

	    <tbody>
	      <row><entry>swap</entry><entry>RAMsize * 2</entry></row>
	      <row><entry><filename>/</filename></entry><entry>512 MB</entry></row>
	      <row><entry><filename>/tmp</filename></entry><entry>512 MB</entry></row>
	      <row><entry><filename>/var</filename></entry><entry>1024 MB + RAMsize</entry></row>
	      <row><entry><filename>/usr</filename></entry><entry>the rest (8GB or more)</entry></row>
	    </tbody>
	  </tgroup>
	</informaltable>
      </listitem>

      <listitem>
	<para>On systems where the disk capacity is larger than
	  (RAMsize / 8 + 2 GB), the default sizes will be
	  in the following ranges, with space allocated
	  proportionally:</para>

	<informaltable frame="none" pgwide="0">
	  <tgroup cols="2">
	    <colspec colwidth="1*">
	    <colspec colwidth="2*">
	    <thead>
	      <row>
		<entry>Partition</entry>
		<entry>Size</entry>
	      </row>
	    </thead>

	    <tbody>
	      <row><entry>swap</entry><entry>from RAMsize / 8 to RAMsize * 2</entry></row>
	      <row><entry><filename>/</filename></entry><entry>from 256MB to 512MB</entry></row>
	      <row><entry><filename>/tmp</filename></entry><entry>from 128MB to 512MB</entry></row>
	      <row><entry><filename>/var</filename></entry><entry>from 128MB to 1024MB</entry></row>
	      <row><entry><filename>/usr</filename></entry><entry>from 1536MB to 8192MB</entry></row>
	    </tbody>
	  </tgroup>
	</informaltable>
      </listitem>

      <listitem>
	<para>On systems with even less disk space, the existing behavior is not
	  changed.</para>
      </listitem>
    </itemizedlist>

    <para>The &man.sysinstall.8; utility now displays the running &os;
      version in menu titles. &merged;</para>

    <para>A new <literal>showconfig</literal>
      target has been added in <filename>src/Makefile</filename>
      to show the build configuration of the &os; source tree.</para>

    <para>A <filename>/media</filename> directory has been
      added to contain mount points for removable media
      such as CDROMs, floppy disks, USB drives, and so on. &merged;</para>

    <para>The <filename>src.conf</filename> file, which
      contains settings that will apply to every build involving
      the &os; source tree, has been added.
      For details, see &man.build.7; and &man.src.conf.5;.</para>

    <para>The supported version of
      the <application>GNOME</application> desktop environment
      (<filename role="package">x11/gnome2</filename>) has been
      updated from 2.10.2 to 2.18.0.  As a part of this update, the
      default prefix for <application>GNOME</application> (and some
      related programs) has moved from
      <filename>/usr/X11R6</filename>
      to <filename>/usr/local</filename>.  &merged;</para>

    <para>The supported version of
      the <application>KDE</application> desktop environment
      (<filename role="package">x11/kde3</filename>) has been
      updated from 3.4.2 to 3.5.7. &merged;</para>

    <para>[&arch.amd64;, &arch.i386;] The supported Linux emulation now uses the
      libraries in the
      <filename role="package">emulators/linux_base-fc4</filename>
      package. &merged;</para>

    <para>The supported version of
      the <application>Perl</application> interpreter
      (<filename role="package">lang/perl5.8</filename>) has been updated
      from 5.8.7 to 5.8.8. &merged;</para>

    <para>The supported version of
      the <application>&xorg;</application> windowing system
      (<filename role="package">x11/xorg</filename>) has been updated
      from 6.8.2 to 7.2.0. &merged;</para>

    <para>The default value of <varname>X11BASE</varname> has been changed
      from <filename>/usr/X11R6</filename> to <filename>/usr/local</filename>,
      the default value of <varname>LOCALBASE</varname>.  &merged;</para>

    <para>[&arch.pc98;] &os;/pc98 release CDROMs are now
      bootable on systems with some supported SCSI adapters.
      &merged;</para>
  </sect2>

  <sect2 id="doc">
    <title>Documentation</title>

    <para>Documentation of existing functionality has been improved by
      the addition of the following manual pages:
      &man.acpi.sony.4;, &man.device.get.sysctl.9;,
      &man.ext2fs.5;,
      &man.mca.8;,
      &man.nanobsd.8;,
      &man.snd.mss.4;, &man.snd.t4dwave.4;,
      &man.sysctl.9;.</para>

    <para>The manual pages for <application>NTP</application>
      have been updated to 4.2.0, to match the version of
      code actually included in &os;. &merged;</para>

    <para>Initial support for kernel subsystem API documentation generating
      framework using <filename role="package">devel/doxygen</filename>
      has been added into <filename>src/sys/doc/subsys</filename>.
      To generate the API document, type <command>make doxygen</command>
      in <filename>src/</filename> directory.</para>
  </sect2>
</sect1>

<sect1 id="upgrade">
  <title>Upgrading from previous releases of &os;</title>

  <para>[&arch.i386;, &arch.amd64;] Beginning with &os; 6.2-RELEASE,
    binary upgrades between RELEASE versions (and snapshots of the
    various security branches) are supported using the
    &man.freebsd-update.8; utility.  The binary upgrade procedure will
    update unmodified userland utilities, as well as unmodified GENERIC or
    SMP kernels distributed as a part of an official &os; release.
    The &man.freebsd-update.8; utility requires that the host being
    upgraded have Internet connectivity.</para>

  <para>An older form of binary upgrade is supported through the
    <command>Upgrade</command> option from the main &man.sysinstall.8;
    menu on CDROM distribution media.  This type of binary upgrade
    may be useful on non-&arch.i386;, non-&arch.amd64; machines
    or on systems with no Internet connectivity.</para>

  <para>Source-based upgrades (those based on recompiling the &os;
    base system from source code) from previous versions are
    supported, according to the instructions in
    <filename>/usr/src/UPDATING</filename>.</para>

  <important>
    <para>Upgrading &os; should, of course, only be attempted after
      backing up <emphasis>all</emphasis> data and configuration
      files.</para>
  </important>
</sect1>
</article>