summaryrefslogtreecommitdiffstats
path: root/sys/pci/if_ste.c
Commit message (Expand)AuthorAgeFilesLines
* Replace handrolled CRC calculation with ether_crc32_[lb]e().naddy2004-06-091-29/+2
* Add missing <sys/module.h> includesphk2004-05-301-0/+1
* A handler for ioctl(SIOCSIFCAP) should not alter a bit inyar2004-05-231-1/+2
* Implemented per-interface polling(4) control.ru2004-04-111-1/+13
* Actually fix the TX performance with polling(4) enabledru2004-04-061-1/+1
* - Improved the TX performance with polling(4) by only checking theru2004-04-061-15/+11
* Recharge the watchdog timer if there's still some TX work left.ru2004-04-031-0/+2
* Performance tuning.ru2004-04-021-38/+44
* Moved the statistical counter under hw.ste.rxsyncs.ru2004-04-011-1/+3
* Under a heavy RX load, at least with D-Link DFE-550TX adapters,ru2004-03-311-1/+18
* Added polling(4) support for ste(4).ru2004-03-311-3/+77
* Switch ste_encap() over to using m_defrag().ru2004-03-301-14/+2
* Properly reprogram the hardware when IFF_ALLMULTI flag is set.ru2004-03-241-0/+3
* Convert callers to the new bus_alloc_resource_any(9) API.njl2004-03-171-3/+2
* Announce ethernet MAC addresss in ether_ifattach().mdodd2004-03-141-6/+0
* Stop setting ifp->if_output to ether_output() since ether_ifattach()mux2004-03-111-1/+0
* Don't use caddr_t in mchash(). Also use C99 spellings over BSD ones.obrien2003-12-081-11/+13
* Drop the driver lock around calls to if_input to avoid a LOR whensam2003-11-141-0/+4
* Try to create some sort of consistency in how the routings to find theobrien2003-11-131-13/+11
* Replace the if_name and if_unit members of struct ifnet with new membersbrooks2003-10-311-2/+1
* Prefer new location of pci include files (which have only been in theimp2003-08-221-2/+2
* Due to extreme bogusness in the pci bus layer, these drivers wereimp2003-07-031-2/+2
* Remove unused variables.phk2003-05-311-4/+0
* Use newly minted device_is_attached rather than device_is_alive to seeimp2003-04-211-1/+1
* Revise attach/detach resource cleanupnjl2003-04-171-4/+14
* - Don't call pci_enable_io() in drivers (unless needed for resume).mdodd2003-04-161-18/+0
* - Express hard dependencies on bus (pci, isa, pccard) andmdodd2003-04-151-1/+3
* Use __FBSDID rather than rcsid[].obrien2003-04-031-7/+3
* Add missing ()'s so that these drivers all compile again.jhb2003-03-311-1/+1
* Clean up locking and resource management for pci/if_*njl2003-03-311-38/+30
* Back out M_* changes, per decision of the TRB.imp2003-02-191-4/+4
* Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.alfred2003-01-211-4/+4
* When reading PHY regs over the i2c bus, the turnaround ACK bitmbr2003-01-101-1/+1
* Change the chip description from "DFE-550TX" to "DL10050".phk2002-12-231-2/+2
* o track either_ifattach/ether_ifdetach API changessam2002-11-141-18/+9
* Fix instances of macros with improperly parenthasized arguments.alfred2002-11-091-6/+6
* Clarify comment to "Code borrowed from if_fxp.c" to deal with runningambrisko2002-09-181-1/+1
* Only probe one PHY on the D-Link 580 version of the card (ie rev 0x12).ambrisko2002-09-111-6/+37
* add missing \n to printfticso2002-09-091-1/+1
* style:alfred2002-08-231-34/+67
* Don't read the PCI config space during mii operations. Instead save whetherambrisko2002-08-191-3/+8
* Revert change to detect multiply PHYs in mii code. There might be casesambrisko2002-08-161-0/+5
* Fixes for the D-Link DFE-580 card.ambrisko2002-08-071-76/+96
* Change callers of mtx_init() to pass in an appropriate lock type name. Injhb2002-04-041-1/+2
* Remove __P.alfred2002-03-201-40/+37
* Remove printf's on mbuf/cluster allocation failures. There are nowluigi2001-12-141-6/+1
* Do not call mii_pollstat() from within device tick routines; the statusjlemon2001-09-291-7/+5
* Fix a bug in the ste_setmulti() routine. The NIC has 4 16-bit multicastwpaul2001-08-231-4/+8
* Apply patch supplied by Jonathan Chen: use the correct arguments towpaul2001-07-091-2/+2
* Big round of minor updates:wpaul2001-02-211-26/+21
OpenPOWER on IntegriCloud