summaryrefslogtreecommitdiffstats
path: root/sys/net/bridgestp.c
Commit message (Expand)AuthorAgeFilesLines
* After cleaning up rt_tables from vnet.h and cleaning up opt_route.hbz2009-06-231-1/+0
* In non-debugging mode make this define (void)0 instead of nothing. Thisrdivacky2009-06-211-1/+1
* After r193232 rt_tables in vnet.h are no longer indirectly dependent onbz2009-06-081-2/+0
* replace IFQ_ENQUEUE + if_start with if_transmitkmacy2009-04-271-14/+2
* For all files including net/vnet.h directly include opt_route.h andbz2009-02-271-0/+3
* Rather than using hidden includes (with cicular dependencies),bz2008-12-021-0/+1
* Step 1.5 of importing the network stack virtualization infrastructurezec2008-10-021-0/+1
* Commit step 1 of the vimage project, (network stack)bz2008-08-171-1/+2
* Fix spelling.thompsa2007-12-091-7/+7
* If the STP state machine is stopped then clear the bridge-id and root-id.thompsa2007-08-181-8/+13
* - Ensure the path cost does not exceed 65535 in legacy STP mode.thompsa2007-08-041-2/+30
* Check the correct port to see if synced is true.thompsa2007-06-221-2/+2
* Properly move the setting of bstp_linkstate_p to the bridgestp module.thompsa2007-03-141-0/+1
* Change the passing of callbacks to a struct in case this needs to be extended...thompsa2007-03-091-4/+3
* Set topology change propagation on all ports _except_ the caller.thompsa2007-01-181-1/+1
* These days P2P means peer-2-peer (also well known from serveral filesharingthompsa2006-12-111-10/+10
* Add two new flags to if_bridge(4) indicating whether the edge flagsyrinx2006-12-041-2/+9
* Sync with the OpenBSD port of RSTPthompsa2006-11-271-3/+33
* Initialize the port info, this shouldnt have been removed in r1.28thompsa2006-11-261-0/+1
* Remove redundant setting of port state.thompsa2006-11-261-1/+0
* use two stage creation of stp ports, this means that the stp variables can bethompsa2006-11-261-17/+24
* Do not call bstp_stop() internally as it clears the running flag which causesthompsa2006-11-191-11/+3
* MFp4thompsa2006-11-091-20/+43
* Defer sending the bpdu from bstp_update_info as all code paths will test thisthompsa2006-11-031-1/+1
* Do not test all the conditions if the port is already forwarding. Also print athompsa2006-11-021-3/+7
* Fix a resource leak when the mbuf pointer changes.thompsa2006-11-021-15/+13
* If the port is agreed or edge then allow it go go straight to forwarding ratherthompsa2006-11-021-7/+8
* Bring in support for the Rapid Spanning Tree Protocol (802.1w).thompsa2006-11-011-788/+1646
* Remove licence clauses 3 & 4thompsa2006-10-011-5/+0
* Add the module version to fix the loading with if_bridge.thompsa2006-08-121-0/+1
* Fix style in the last commit, the variable declaration goes at the top of thethompsa2006-08-021-1/+2
* Add a callback so we can notify the parent bridge that a port state change hasthompsa2006-08-021-3/+34
* Be sure to disable the port when removing it from STP.thompsa2006-08-021-0/+2
* Add some statistics that are needed to support RFC4188 as part of the SoC2006thompsa2006-07-311-0/+10
* /tmp/cvsuusTrcthompsa2006-07-261-561/+631
* If we miss the LINK_UP event from the network interface then the bridge portthompsa2006-03-061-13/+10
* Fix up the Bridge Identifier field in the BPDU packet.thompsa2006-02-281-15/+30
* Minor whitespace cleanup.thompsa2005-12-171-1/+1
* Change most of the bridge and stp funtions to static. This has highlightedthompsa2005-10-141-99/+112
* Further clean up the bridge hooks in if_ethersubr.c and ng_ether.cthompsa2005-10-141-1/+0
* Do not unconditionally set a spanning tree port to forwarding as the link may bethompsa2005-10-111-1/+1
* Mark the callouts as MPSAFE as if_bridge has been giant-free since day 1.thompsa2005-08-181-3/+1
* Ensure that we are holding the lock when initialising the bridge interface. Wethompsa2005-08-151-0/+2
* Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE andrwatson2005-08-091-3/+3
* - Previously when broadcasting to N number of interfaces we would run pfilthompsa2005-07-061-2/+2
* Stop embedding struct ifnet at the top of driver softcs. Instead thebrooks2005-06-101-3/+1
* Add if_bridge, which provides more advanced Ethernet bridging and 802.1dthompsa2005-06-051-0/+1174
OpenPOWER on IntegriCloud