summaryrefslogtreecommitdiffstats
path: root/sys/dev/puc
Commit message (Expand)AuthorAgeFilesLines
* Replace some more default range checks with RMAN_IS_DEFAULT_RANGE().jhibbits2016-03-021-1/+1
* Convert rman to use rman_res_t instead of u_longjhibbits2016-01-272-7/+7
* - Add support for Advantech PCI-1602 Rev. B1 and PCI-1603 cards. [1]marius2016-01-101-28/+126
* - Add entries for the more prominent members of the Digi Internationalmarius2015-12-291-16/+69
* - Add an entry for the SIIG Cyber 2SP1 PCIe adapter, which is basedmarius2015-12-281-4/+11
* puc(4): Add an entry for the Feasso PCI FPP-02 2S1P card.loos2015-01-021-0/+6
* puc(4): add an entry for the Oxford Semiconductor OXPCIe952 1S1P card.rpaulo2014-10-231-0/+7
* Pull in r267961 and r267973 again. Fix for issues reported will follow.hselasky2014-06-281-2/+1
* Revert r267961, r267973:gjb2014-06-271-1/+2
* Extend the meaning of the CTLFLAG_TUN flag to automatically check ifhselasky2014-06-271-2/+1
* Correct a typo in a device description added in r264257.marius2014-04-151-1/+1
* Refine r264257; given that I later on decided to nuke the wildcard formarius2014-04-101-7/+0
* Distinguish between the different variants and configurations of Sunixmarius2014-04-081-4/+71
* Add MSI support to puc(9)rstone2014-03-136-3/+62
* Clean up -Wheader-guard warnings.pluknet2013-06-172-2/+2
* All of Oxford/PLX OX16PCI954, OXm16PCI954 and OXu16PCI954 share themarius2013-06-131-1/+25
* Fix whitespace and normalize some entries.marius2013-06-131-22/+22
* Correct the definition for Exar XR17V258IV: we must use a config_functionrstone2013-03-181-0/+1
* Add support for Exar XR17V358 8-port serial device to puc(4)rstone2013-03-151-0/+20
* - Apparently, r186520 was just wrong and the clock of Oxford OX16PCI958 ismarius2013-03-011-7/+8
* Do not require a filter-only interrupt handler for puc ports that are notjhb2013-01-151-1/+1
* Add support for Advantech PCI-1602 RS-485/RS-422 serial cardeadler2012-11-091-0/+6
* Add support for SIIG Cyber Serial Dual PCI 16C850eadler2012-08-051-0/+6
* Add additional Perle Speed LE serial cardseadler2012-08-051-0/+25
* - Change back "d_ofs" to int8_t to not pessimize padding and size of "struct ...fjoe2012-07-312-6/+15
* Remove Moxa CP-132EL definition (RS422/485-only board).fjoe2012-06-211-6/+0
* Add support for the following Moxa PCIe multiport serial boards:fjoe2012-06-212-4/+39
* Add support for the Sunix SER5437A dual serial PCI Express card.jhay2012-06-081-0/+6
* Add support for Sun 1040 PCI Quad Serialeadler2012-05-301-0/+6
* - There's no need to overwrite the default device method with the defaultmarius2011-11-222-4/+4
* - add support for Titan VScom PCIex-800Headler2011-11-151-0/+12
* - add support for CP-104EL-A and CP-104JU to puceadler2011-11-111-0/+27
* Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.ed2011-11-071-1/+1
* - add support for I-O DATA RSA-PCI2/Readler2011-10-151-0/+6
* Add Oxford Semiconductor OXPCIe952 (0x1c38) 1 port serial card.ae2011-09-291-0/+7
* Add device id for the Moxa CP-112UL dual-port serial adapters.jhb2011-08-151-0/+6
* Add location and pnpinfo strings for puc device ports. The location isjhb2011-06-144-2/+47
* Some style fixes.jhb2011-06-061-6/+4
* - Rename the Cronyx Omega2-PCI entry to Exar XR17C158 since that is thejhb2011-06-031-13/+27
* For Timedia multiport serial adapters, the first two ports use a SUN1889jhb2011-05-261-0/+6
* Add support for the SIIG Cyber 2S PCIe adapter. It is based on anjhb2011-05-191-0/+6
* Add an entry for the SIIG Quartet Serial 850 which uses an Oxfordjhb2011-05-101-0/+6
* Add an entry for the Kuroutoshikou SERIAL4P-LPPCI2 which uses an Oxfordjhb2011-05-021-0/+6
* Add support for Oxford PCI Express Expresso family devices.jhb2011-04-281-1/+134
* Add Exar octal PCI UART.emaste2010-12-181-0/+6
* Add support for the Perle Speed4 LE.jhb2010-05-201-0/+12
* Fix interrupt handling. It started off broken and grew worse over time.marcel2009-12-111-46/+62
* Add support for the NetMos NM9865 family of Serial/Parallel ports.marcel2009-12-071-3/+39
* Make puc(4) aware of this 2 port serial card based on NetMos 9835:np2009-06-201-0/+6
* Add support for the four PUC serial interfaces found on IBM SurePOS 300rwatson2009-06-021-0/+11
OpenPOWER on IntegriCloud