summaryrefslogtreecommitdiffstats
path: root/sys/arm/conf
Commit message (Expand)AuthorAgeFilesLines
* Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201.cognet2010-07-142-0/+201
* Convert Marvell ARM platforms to FDT convention.raj2010-06-134-0/+16
* Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this hadthompsa2010-04-227-0/+7
* Build modules for this config to make sure they stay buildable...imp2010-03-291-1/+1
* Add support for the Samsung S3C2xx0 family of ARM SoCs written byimp2010-03-201-0/+87
* fix type in commentticso2010-03-121-1/+1
* Update the commented out option for omitting the sysctl descriptions; itbrucec2010-02-243-3/+3
* Adjust style (following the already existing rules) for the newlyattilio2010-02-1514-14/+14
* Add the options DEADLKRES (introducing the deadlock resolver thread) inattilio2010-02-1016-0/+16
* Move the examples for the 'hints' and 'env' keywords from various GENERICjhb2010-01-196-12/+0
* Revert 200594. This file isn't intended for these sorts of things.imp2010-01-041-7/+0
* Remove CNS11XXNAS.hints.rpaulo2010-01-042-3/+0
* Add support for Cavium Econa CNS11XX ARM boards. These boards wererpaulo2010-01-042-0/+127
* Intel XScale hwpmc(4) support.rpaulo2009-12-232-0/+8
* Add INCLUDE_CONFIG_FILE, and a note in comments about how to alsodougb2009-12-161-0/+7
* Add missing ath_ar9* ath hal entries.thompsa2009-12-021-0/+1
* Remove unknown ath hal device entries.thompsa2009-12-021-3/+0
* Sync with other GENERIC kernel configs:jhb2009-10-132-23/+31
* revert r196600; didn't notice it'd been done alreadysam2009-08-271-1/+0
* enable mesh by defaultsam2009-08-271-0/+1
* Introduce SheevaPlug support.raj2009-08-251-0/+70
* Add IEEE80211_SUPPORT_MESH, following similar change to nanobsd andrpaulo2009-07-172-0/+2
* temporarily disable optional uarts; apparently we hang when probing themsam2009-06-251-9/+9
* Introduce ata(4) support for Marvell integrated SATA controllers (found onraj2009-06-243-0/+12
* kill left over cruftsam2009-06-221-2/+0
* enable optional GPS+RS485 uartssam2009-06-221-0/+14
* fix typosam2009-06-221-1/+1
* o remove hack to write UUE+RTOIE in the uart's IER; force them with hintssam2009-06-222-0/+3
* enable npe-a now that it workssam2009-06-171-5/+5
* Delete the old USB stack. The new stack has settled in and has all thethompsa2009-05-271-7/+6
* - Use "device\t" and "options \t" for consistency.kuriyama2009-05-1015-238/+238
* Use the good hints for the NSLU, it should fix the network adapter.cognet2009-05-061-6/+6
* - Rename ds1672 and ds133x devices to "ds1672_rtc" and "ds133x_rtc"stas2009-04-213-6/+6
* - Give a warning and start the oscillator if it was not previouslystas2009-04-203-6/+6
* minor cleanupticso2009-04-171-5/+3
* revert unintended changesam2009-03-301-1/+0
* Hoist 802.11 encapsulation up into net80211:sam2009-03-301-0/+1
* Remove ATH_SUPPORT_TDMA and use IEEE80211_SUPPORT_TDMA instead. Itsam2009-03-302-2/+0
* Remove the uscanner(4) driver, this follows the removal of the kernel scannerthompsa2009-03-192-2/+0
* switch to !legacy usb stacksam2009-03-111-6/+5
* configure flash supportsam2009-03-102-0/+6
* add cfid and geom_redbootsam2009-03-092-1/+7
* enable tdma support by default; many people using these boardssam2009-03-062-0/+4
* legacy USB is required on these platforms at the momentsam2009-03-062-21/+23
* Change over the usb kernel options to the new stack (retaining existingthompsa2009-02-236-8/+0
* use mii instead of miibus so we don't drag in all phy supportsam2009-02-182-2/+2
* Add support for the StrataFlash on 2348 boards:sam2009-02-032-1/+7
* Include std.ixp425 for "cpu" and comment out duplicate memory mapbz2008-12-281-7/+10
* In additions to the configs from r185478, which also enabled thebz2008-12-273-0/+3
* arm is in DEFAULTS; remove dupsam2008-12-271-1/+0
OpenPOWER on IntegriCloud