diff options
Diffstat (limited to 'usr.sbin')
48 files changed, 104 insertions, 104 deletions
diff --git a/usr.sbin/ancontrol/ancontrol.8 b/usr.sbin/ancontrol/ancontrol.8 index 0374298..5ce4377 100644 --- a/usr.sbin/ancontrol/ancontrol.8 +++ b/usr.sbin/ancontrol/ancontrol.8 @@ -134,7 +134,7 @@ should be the logical interface name associated with the Aironet device .Li ( an0 , an1 , etc.). -If one isn't specified the device +If one is not specified the device .Dq Li an0 will be assumed. .Pp @@ -398,7 +398,7 @@ The SSID to be changed can be specified with the modifier option. If the .Fl v -flag isn't used, the first SSID in the list is set. +flag is not used, the first SSID in the list is set. .It Fl i Ar iface Fl o Cm 0 | 1 Set the operating mode of the Aironet interface. Valid selections are diff --git a/usr.sbin/apm/apm.8 b/usr.sbin/apm/apm.8 index 5637786..8142668 100644 --- a/usr.sbin/apm/apm.8 +++ b/usr.sbin/apm/apm.8 @@ -96,7 +96,7 @@ support this function, 255 is displayed. .It Fl r Ar delta Enable the resume wakeup timer, if the laptop supports it. This -doesn't actually suspend the laptop, but if the laptop is suspended, +does not actually suspend the laptop, but if the laptop is suspended, and it supports resume from suspend, then it will be resumed after .Ar delta seconds (from when you run this command, not from when you suspend). diff --git a/usr.sbin/apmd/apmd.8 b/usr.sbin/apmd/apmd.8 index 7a2398c..f94ea5d 100644 --- a/usr.sbin/apmd/apmd.8 +++ b/usr.sbin/apmd/apmd.8 @@ -81,7 +81,7 @@ to be used in place of the default Causes .Nm to simulate a POWERSTATECHANGE event when a power state change is detected -(AC_POWER_STATE) but the bios of the laptop doesn't report it. +(AC_POWER_STATE) but the bios of the laptop does not report it. This enables you to do things like dimming the LCD backlight when you unplug the power cord. .It Fl v diff --git a/usr.sbin/chown/chgrp.1 b/usr.sbin/chown/chgrp.1 index cacbf80..0b3a789 100644 --- a/usr.sbin/chown/chgrp.1 +++ b/usr.sbin/chown/chgrp.1 @@ -75,7 +75,7 @@ This is the default. Change the group ID for the file hierarchies rooted in the files instead of just the files themselves. .It Fl f -The force option ignores errors, except for usage errors and doesn't +The force option ignores errors, except for usage errors and does not query about strange modes (unless the user does not have proper permissions). .It Fl h If the file is a symbolic link, the group ID of the link itself is changed diff --git a/usr.sbin/chown/chown.8 b/usr.sbin/chown/chown.8 index cb7e170..f617f73 100644 --- a/usr.sbin/chown/chown.8 +++ b/usr.sbin/chown/chown.8 @@ -83,7 +83,7 @@ Beware of unintentionally matching the hard link to the parent directory when using wildcards like .Dq Li ".*" . .It Fl f -Don't report any failure to change file owner or group, nor modify +Do not report any failure to change file owner or group, nor modify the exit status to reflect such failures. .It Fl h If the file is a symbolic link, change the user ID and/or the diff --git a/usr.sbin/cron/cron/cron.8 b/usr.sbin/cron/cron/cron.8 index 31b579f..e6db0f2 100644 --- a/usr.sbin/cron/cron/cron.8 +++ b/usr.sbin/cron/cron/cron.8 @@ -38,7 +38,7 @@ utility should be started from or .Pa /etc/rc.local . It will return immediately, -so you don't need to start it with '&'. +so you do not need to start it with '&'. .Pp The .Nm @@ -89,7 +89,7 @@ Prior to executing commands, .Nm will sleep a random number of seconds in the range from 0 to .Ar jitter . -This won't affect superuser jobs (see +This will not affect superuser jobs (see .Fl J ) . A value for .Ar jitter diff --git a/usr.sbin/cron/crontab/crontab.5 b/usr.sbin/cron/crontab/crontab.5 index 0d9f9e7..006ae86 100644 --- a/usr.sbin/cron/crontab/crontab.5 +++ b/usr.sbin/cron/crontab/crontab.5 @@ -127,8 +127,8 @@ instead of as your mailer when you install cron -- .Pa /bin/mail -doesn't do aliasing, and UUCP -usually doesn't read its mail. +does not do aliasing, and UUCP +usually does not read its mail. .Pp The format of a cron command is very much the V7 standard, with a number of upward-compatible extensions. @@ -185,7 +185,7 @@ hours'', just use ``*/2''. Names can also be used for the ``month'' and ``day of week'' fields. Use the first three letters of the particular -day or month (case doesn't matter). +day or month (case does not matter). Ranges or lists of names are not allowed. .Pp @@ -206,7 +206,7 @@ input. Note: The day of a command's execution can be specified by two fields \(em day of month, and day of week. If both fields are -restricted (ie, aren't *), the command will be run when +restricted (ie, are not *), the command will be run when .Em either field matches the current time. For example, @@ -278,9 +278,9 @@ environment handed to child processes is basically the one from .Pp Command output is mailed to the crontab owner .No ( Bx -can't do this), can be -mailed to a person other than the crontab owner (SysV can't do this), or the -feature can be turned off and no mail will be sent at all (SysV can't do this +cannot do this), can be +mailed to a person other than the crontab owner (SysV cannot do this), or the +feature can be turned off and no mail will be sent at all (SysV cannot do this either). .Pp All of the diff --git a/usr.sbin/ctm/ctm/ctm.1 b/usr.sbin/ctm/ctm/ctm.1 index eda4b3a..732b0b9 100644 --- a/usr.sbin/ctm/ctm/ctm.1 +++ b/usr.sbin/ctm/ctm/ctm.1 @@ -145,7 +145,7 @@ and options, then the final set of files backed up are those that would be modified by CTM after the filters are applied. .It Fl c -Check it out, don't do anything. +Check it out, do not do anything. .It Fl e Ar regular_expression Match each name in the CTM file against .Ar regular_expression , @@ -167,7 +167,7 @@ option. .It Fl F Force. .It Fl k -Keep files and directories and don't remove them even if the CTM file +Keep files and directories and do not remove them even if the CTM file specifies they are to be removed. If the .Fl B diff --git a/usr.sbin/ctm/ctm/ctm.5 b/usr.sbin/ctm/ctm/ctm.5 index 8b93be3..678837e 100644 --- a/usr.sbin/ctm/ctm/ctm.5 +++ b/usr.sbin/ctm/ctm/ctm.5 @@ -34,7 +34,7 @@ Data chunks always belong to the preceding control line, and the last field on that control line is the number of bytes in the data chunk. A trailing newline '\en' character follows each data chunk, this -newline is not part of the chunk and isn't included in the count. +newline is not part of the chunk and is not included in the count. .Pp The CTM statements are as follows. .Bl -tag -width indent diff --git a/usr.sbin/ctm/ctm_rmail/ctm_rmail.1 b/usr.sbin/ctm/ctm_rmail/ctm_rmail.1 index 5b473d7..5476e49 100644 --- a/usr.sbin/ctm/ctm_rmail/ctm_rmail.1 +++ b/usr.sbin/ctm/ctm_rmail/ctm_rmail.1 @@ -215,7 +215,7 @@ timing out, or even termination of by mail filters such as .Xr "MH's" .Xr slocal . -Don't worry about zillions of background +Do not worry about zillions of background .Xr ctm processes loading your machine, since locking is used to prevent more than one .Xr ctm diff --git a/usr.sbin/fdread/fdread.1 b/usr.sbin/fdread/fdread.1 index 5a4ecc2..20a79fc 100644 --- a/usr.sbin/fdread/fdread.1 +++ b/usr.sbin/fdread/fdread.1 @@ -100,7 +100,7 @@ to be included in the output file! .Ef Still, this is the best recovery action that can be taken at all. .It -All other errors are really fatal (usually, the FDC didn't find the +All other errors are really fatal (usually, the FDC did not find the sector ID fields), thus a dummy block with fill bytes will be included in the output file. .El diff --git a/usr.sbin/fdwrite/fdwrite.1 b/usr.sbin/fdwrite/fdwrite.1 index cb80dd6..28df514 100644 --- a/usr.sbin/fdwrite/fdwrite.1 +++ b/usr.sbin/fdwrite/fdwrite.1 @@ -54,7 +54,7 @@ remaining on the current floppy disk, and the letters I, Z, F, W, R and C, which indicates completion of Input, Zero-fill, Format Write, Read and Compare of current track respectively. .It Fl y -Don't ask for presence of a floppy disk in the drive. +Do not ask for presence of a floppy disk in the drive. This non-interactive flag is useful for shell scripts. .It Fl f Ar inputfile diff --git a/usr.sbin/iostat/iostat.8 b/usr.sbin/iostat/iostat.8 index f945ee5..4c1a009 100644 --- a/usr.sbin/iostat/iostat.8 +++ b/usr.sbin/iostat/iostat.8 @@ -141,7 +141,7 @@ Display up to number of devices. The .Nm -utility will display fewer devices if there aren't +utility will display fewer devices if there are not .Ar devs devices present. .It Fl N diff --git a/usr.sbin/lpr/lpc/lpc.8 b/usr.sbin/lpr/lpc/lpc.8 index 46e169f..ea79241 100644 --- a/usr.sbin/lpr/lpc/lpc.8 +++ b/usr.sbin/lpr/lpc/lpc.8 @@ -133,7 +133,7 @@ When specifying more than one printer queue, the .Ic -msg argument is required to separate the list of printers from the text that will be the new status message. -The message doesn't need to be quoted, the +The message does not need to be quoted, the remaining arguments are treated like .Xr echo 1 . This is normally used to take a printer down, and let other users diff --git a/usr.sbin/lpr/lpd/lpd.8 b/usr.sbin/lpr/lpd/lpd.8 index 5d6e2cd..7c7afab 100644 --- a/usr.sbin/lpr/lpd/lpd.8 +++ b/usr.sbin/lpr/lpd/lpd.8 @@ -157,7 +157,7 @@ machine with the printer. The file .Em minfree in each spool directory contains the number of disk blocks to leave free -so that the line printer queue won't completely fill the disk. +so that the line printer queue will not completely fill the disk. The .Em minfree file can be edited with your favorite text editor. diff --git a/usr.sbin/mount_nwfs/mount_nwfs.8 b/usr.sbin/mount_nwfs/mount_nwfs.8 index da915a9..3946f71 100644 --- a/usr.sbin/mount_nwfs/mount_nwfs.8 +++ b/usr.sbin/mount_nwfs/mount_nwfs.8 @@ -55,7 +55,7 @@ command line arguments (the .Fl U and .Fl V -options aren't used in this case). +options are not used in this case). This allows use of .Xr fstab 5 file (see @@ -122,7 +122,7 @@ permission where the file mode gives read permission. Note that these permissions can differ from the rights granted by NetWare server. .It Fl n Ar namespace -Don't use +Do not use .Ar namespace . Currently only .Ar OS2 diff --git a/usr.sbin/mptable/mptable.1 b/usr.sbin/mptable/mptable.1 index e8ff5ad..445285b 100644 --- a/usr.sbin/mptable/mptable.1 +++ b/usr.sbin/mptable/mptable.1 @@ -51,7 +51,7 @@ The following options are available: .It Fl dmesg Include a dmesg dump. .It Fl grope -Look in areas it shouldn't NEED to, use ONLY as a last resort. +Look in areas it should not NEED to, use ONLY as a last resort. .It Fl help Print a usage message and exits. .It Fl verbose diff --git a/usr.sbin/mrouted/mtrace.8 b/usr.sbin/mrouted/mtrace.8 index d3d5d9e..347cbe9 100644 --- a/usr.sbin/mrouted/mtrace.8 +++ b/usr.sbin/mrouted/mtrace.8 @@ -360,7 +360,7 @@ The utility will try to query three (changed with the .Fl e option) hops past a non-responding router, in the hopes that even -though it isn't capable of sending a response, it might be capable of +though it is not capable of sending a response, it might be capable of forwarding the request on. .Sh EXAMPLES The output of @@ -585,5 +585,5 @@ are modeled after the unicast program written by .An Van Jacobson . .Sh BUGS -Statistics collection in passive mode doesn't always produce the same output +Statistics collection in passive mode does not always produce the same output as when actively collecting data. diff --git a/usr.sbin/mtree/mtree.8 b/usr.sbin/mtree/mtree.8 index 2cb9bfd..971474a 100644 --- a/usr.sbin/mtree/mtree.8 +++ b/usr.sbin/mtree/mtree.8 @@ -72,7 +72,7 @@ The options are as follows: .It Fl L Follow all symbolic links in the file hierarchy. .It Fl P -Don't follow symbolic links in the file hierarchy, instead consider +Do not follow symbolic links in the file hierarchy, instead consider the symbolic link itself in any comparisons. This is the default. .It Fl U @@ -87,7 +87,7 @@ Print a specification for the file hierarchy to the standard output. .It Fl d Ignore everything except directory type files. .It Fl e -Don't complain about files that are in the file hierarchy, but not in the +Do not complain about files that are in the file hierarchy, but not in the specification. .It Fl i Indent the output 4 spaces each time a directory level is descended when @@ -121,7 +121,7 @@ the specification. .It Fl w Make some errorconditions non-fatal warnings. .It Fl x -Don't descend below mount points in the file hierarchy. +Do not descend below mount points in the file hierarchy. .It Fl f Ar file Read the specification from .Ar file , diff --git a/usr.sbin/newsyslog/newsyslog.8 b/usr.sbin/newsyslog/newsyslog.8 index 1879b18..421c6eb 100644 --- a/usr.sbin/newsyslog/newsyslog.8 +++ b/usr.sbin/newsyslog/newsyslog.8 @@ -240,4 +240,4 @@ Copyright 1987, Massachusetts Institute of Technology .Xr chown 8 , .Xr syslogd 8 .Sh BUGS -Doesn't yet automatically read the logs to find security breaches. +Does not yet automatically read the logs to find security breaches. diff --git a/usr.sbin/ntp/doc/ntp.conf.5 b/usr.sbin/ntp/doc/ntp.conf.5 index 37a61be..876432f 100644 --- a/usr.sbin/ntp/doc/ntp.conf.5 +++ b/usr.sbin/ntp/doc/ntp.conf.5 @@ -1973,7 +1973,7 @@ general, they interact in intricate ways that are hard to predict and some combinations can result in some very nasty behavior. Very rarely is it necessary to change the default values; but, some -folks can't resist twisting the knobs anyway and this command is +folks cannot resist twisting the knobs anyway and this command is for them. Emphasis added: twisters are on their own and can expect no help from the support group. diff --git a/usr.sbin/ntp/doc/ntpd.8 b/usr.sbin/ntp/doc/ntpd.8 index 14457c7..5808371 100644 --- a/usr.sbin/ntp/doc/ntpd.8 +++ b/usr.sbin/ntp/doc/ntpd.8 @@ -140,7 +140,7 @@ Listen to virtual IPs. Synchronize using NTP multicast messages on the IP multicast group address 224.0.1.1 (requires multicast kernel). .It Fl n -Don't fork. +Do not fork. .It Fl N Ar priority To the extent permitted by the operating system, run the .Nm diff --git a/usr.sbin/ntp/doc/ntpdate.8 b/usr.sbin/ntp/doc/ntpdate.8 index 9d5084a..8d4b6d3 100644 --- a/usr.sbin/ntp/doc/ntpdate.8 +++ b/usr.sbin/ntp/doc/ntpdate.8 @@ -129,7 +129,7 @@ as the integer with values from 1 to 8 inclusive. The default is 4. .It Fl q -Query only - don't set the clock. +Query only - do not set the clock. .It Fl s Divert logging output from the standard output (default) to the system diff --git a/usr.sbin/ntp/doc/ntpq.8 b/usr.sbin/ntp/doc/ntpq.8 index 4c0d7ca..c2efc66 100644 --- a/usr.sbin/ntp/doc/ntpq.8 +++ b/usr.sbin/ntp/doc/ntpq.8 @@ -200,7 +200,7 @@ will have their values reformatted for human consumption. Variables which .Nm -thinks should have a decodable value but didn't are +thinks should have a decodable value but did not are marked with a trailing .Ql \&? . .It Xo Ic debug @@ -254,7 +254,7 @@ Sets the NTP version number which claims in packets. Defaults to 3, Note that mode 6 control messages (and -modes, for that matter) didn't exist in NTP version 1. +modes, for that matter) did not exist in NTP version 1. There appear to be no servers left which demand version 1. .It Ic quit @@ -746,4 +746,4 @@ The timeout time is a fixed constant, which means you wait a long time for timeouts since it assumes sort of a worst case. The program should improve the timeout estimate as -it sends queries to a particular host, but doesn't. +it sends queries to a particular host, but does not. diff --git a/usr.sbin/pccard/pccardd/pccard.conf.5 b/usr.sbin/pccard/pccardd/pccard.conf.5 index 2f468fe..c3d496d 100644 --- a/usr.sbin/pccard/pccardd/pccard.conf.5 +++ b/usr.sbin/pccard/pccardd/pccard.conf.5 @@ -238,7 +238,7 @@ command allows the user to set the string to be logged when this card is inserted or removed. If .Em logstr -isn't specified, then the manufacturer and +is not specified, then the manufacturer and card version strings from the CIS are used to synthesize the string issued. .Ss "Wildcard entries" Following two wildcard entries of card identifiers are available diff --git a/usr.sbin/pccard/pccardd/pccardd.8 b/usr.sbin/pccard/pccardd/pccardd.8 index 34c95aa..105552b 100644 --- a/usr.sbin/pccard/pccardd/pccardd.8 +++ b/usr.sbin/pccard/pccardd/pccardd.8 @@ -139,7 +139,7 @@ process running. .It Fl z Delays running as a daemon until after the cards have been probed and attached. .It Fl I -Don't get a list of free IRQs from kernel. +Do not get a list of free IRQs from kernel. .It Fl i Ar IRQ Configures an available IRQ. It overrides the "irq" line in diff --git a/usr.sbin/pcvt/userkeys/vt220keys.1 b/usr.sbin/pcvt/userkeys/vt220keys.1 index 6a5528a..35d80ca 100644 --- a/usr.sbin/pcvt/userkeys/vt220keys.1 +++ b/usr.sbin/pcvt/userkeys/vt220keys.1 @@ -121,7 +121,7 @@ There are 256 bytes available for the SHIFTED function keys. Space is supplied on a first\-come/first\-serve basis. After the 256 bytes are -used, you can't define any more keys unless space is cleared. +used, you cannot define any more keys unless space is cleared. This can be done by redefining a key to contain a string of fewer bytes. .Pp diff --git a/usr.sbin/pkg_install/add/pkg_add.1 b/usr.sbin/pkg_install/add/pkg_add.1 index 2284ac6..d2ae1af 100644 --- a/usr.sbin/pkg_install/add/pkg_add.1 +++ b/usr.sbin/pkg_install/add/pkg_add.1 @@ -86,7 +86,7 @@ Turn on verbose output. If any installation scripts (pre-install or post-install) exist for a given package, do not execute them. .It Fl n -Don't actually install a package, just report the steps that +Do not actually install a package, just report the steps that would be taken if it was. .It Fl R Do not record the installation of a package. @@ -431,7 +431,7 @@ flag to .Sh ENVIRONMENT The value of the .Ev PKG_PATH -is used if a given package can't be found. +is used if a given package cannot be found. The environment variable should be a series of entries separated by colons. Each entry diff --git a/usr.sbin/pkg_install/create/pkg_create.1 b/usr.sbin/pkg_install/create/pkg_create.1 index 43a9fbf..9aff98f 100644 --- a/usr.sbin/pkg_install/create/pkg_create.1 +++ b/usr.sbin/pkg_install/create/pkg_create.1 @@ -466,7 +466,7 @@ Useful in trying to document some particularly hairy sequence that may trip someone up later. .It Cm @ignore -Used internally to tell extraction to ignore the next file (don't +Used internally to tell extraction to ignore the next file (do not copy it anywhere), as it's used for some special purpose. .It Cm @ignore_inst Similar to diff --git a/usr.sbin/pkg_install/delete/pkg_delete.1 b/usr.sbin/pkg_install/delete/pkg_delete.1 index 92f22fa..3f10b9c 100644 --- a/usr.sbin/pkg_install/delete/pkg_delete.1 +++ b/usr.sbin/pkg_install/delete/pkg_delete.1 @@ -83,7 +83,7 @@ Turn on verbose output. .It Fl D If a deinstallation script exists for a given package, do not execute it. .It Fl n -Don't actually deinstall a package, just report the steps that +Do not actually deinstall a package, just report the steps that would be taken if it were. .It Fl p Ar prefix Set diff --git a/usr.sbin/pkg_install/info/pkg_info.1 b/usr.sbin/pkg_install/info/pkg_info.1 index a212051..a959742 100644 --- a/usr.sbin/pkg_install/info/pkg_info.1 +++ b/usr.sbin/pkg_install/info/pkg_info.1 @@ -95,7 +95,7 @@ Show the install-message file for each package. .It Fl f Show the packing list instructions for each package. .It Fl g -Show files that don't match the recorded checksum. +Show files that do not match the recorded checksum. .It Fl i Show the install script (if any) for each package. .It Fl I @@ -182,8 +182,8 @@ Prefix each information category header (see shown with .Ar str . This is primarily of use to front-end programs who want to request a -lot of different information fields at once for a package, but don't -necessary want the output intermingled in such a way that they can't +lot of different information fields at once for a package, but do not +necessary want the output intermingled in such a way that they cannot organize it. This lets you add a special token to the start of each field. diff --git a/usr.sbin/pkg_install/sign/pkg_sign.1 b/usr.sbin/pkg_install/sign/pkg_sign.1 index ff73cf5..661d20e 100644 --- a/usr.sbin/pkg_install/sign/pkg_sign.1 +++ b/usr.sbin/pkg_install/sign/pkg_sign.1 @@ -63,7 +63,7 @@ If is .Cm pgp , it will always prompt you for a passphrase to unlock your private -pgp key, even if you don't use a passphrase (which is a bad idea, anyway). +pgp key, even if you do not use a passphrase (which is a bad idea, anyway). If .Ar type is @@ -166,7 +166,7 @@ utility currently does not handle multiple signatures. .It "File %s is not a signed gzip file" This is an unsigned package. .It "File %s is not a gzip file" -The program couldn't find a proper gzip header. +The program could not find a proper gzip header. .It "File %s contains an unknown extension" The extended area of the gzip file has been used for an unknown purpose. .It "File %s uses old signatures, no longer supported" @@ -196,7 +196,7 @@ The .Xr pgp 1 utility is an ill-designed program, which is hard to interface with. For instance, the `separate signing scheme' it pretends to offer is -useless, as it can't be used with pipes, so that +useless, as it cannot be used with pipes, so that .Nm pgp_sign needs to kludge it by knowing the length of a pgp signature, and invoking pgp in `seamless' signature mode, without compression of the main file, diff --git a/usr.sbin/pkg_install/version/pkg_version.1 b/usr.sbin/pkg_install/version/pkg_version.1 index feb391f..b846e0a 100644 --- a/usr.sbin/pkg_install/version/pkg_version.1 +++ b/usr.sbin/pkg_install/version/pkg_version.1 @@ -129,7 +129,7 @@ to the shell, it is best to quote .Ar limchar with single quotes. .It Fl L -Limit the output to those packages whose status flag doesn't match +Limit the output to those packages whose status flag does not match .Ar limchar . You may specify more than one character to match in .Ar limchar . diff --git a/usr.sbin/ppp/ppp.8.m4 b/usr.sbin/ppp/ppp.8.m4 index 0ade06c..510a291 100644 --- a/usr.sbin/ppp/ppp.8.m4 +++ b/usr.sbin/ppp/ppp.8.m4 @@ -105,7 +105,7 @@ are understood by .It Fl auto .Nm opens the tun interface, configures it then goes into the background. -The link isn't brought up until outgoing data is detected on the tun +The link is not brought up until outgoing data is detected on the tun interface at which point .Nm attempts to bring up the link. @@ -446,7 +446,7 @@ you may need to deal with some initial configuration details. .It Your kernel must {include} a tunnel device (the GENERIC kernel includes one by default). -If it doesn't, or if you require more than one tun +If it does not, or if you require more than one tun interface, you'll need to rebuild your kernel with the following line in your kernel configuration file: .Pp @@ -465,7 +465,7 @@ directory for the tunnel device entries where .Sq N represents the number of the tun device, starting at zero. -If they don't exist, you can create them by running "sh ./MAKEDEV tunN". +If they do not exist, you can create them by running "sh ./MAKEDEV tunN". This will create tun devices 0 through .Ar N . .It @@ -515,7 +515,7 @@ and using .Pp in .Pa /etc/syslog.conf . -Don't forget to send a +Do not forget to send a .Dv HUP signal to .Xr syslogd 8 @@ -584,7 +584,7 @@ to certain PPP-capable terminal servers), this may result in hanging as soon as it tries to write data to your communications link as it is waiting for the CTS (clear to send) signal - which will never come. -Thus, if you have a direct line and can't seem to make a +Thus, if you have a direct line and cannot seem to make a connection, try turning CTS/RTS off with .Dq set ctsrts off . If you need to do this, check the @@ -707,7 +707,7 @@ If only some of the three Ps go uppercase, wait until either everything is uppercase or lowercase. If they revert to lowercase, it means that .Nm -couldn't successfully negotiate with the peer. +could not successfully negotiate with the peer. A good first step for troubleshooting at this point would be to .Bd -literal -offset indent ppp ON awfulhak> set log local phase lcp ipcp @@ -1226,7 +1226,7 @@ For example: .Pp .Dl ttyd1 Qo /usr/libexec/getty std.38400 Qc dialup on secure .Pp -Don't forget to send a +Do not forget to send a .Dv HUP signal to the .Xr init 8 @@ -1457,7 +1457,7 @@ will open a TCP connection to the given machine on the given socket. It should be noted however that .Nm -doesn't use the telnet protocol and will be unable to negotiate +does not use the telnet protocol and will be unable to negotiate with a telnet server. You should set up a port for receiving this .Em PPP @@ -1476,7 +1476,7 @@ how to deal with incoming connections on that port: .Pp .Dl ppp-in stream tcp nowait root /usr/sbin/ppp ppp -direct ppp-in .Pp -Don't forget to send a +Do not forget to send a .Dv HUP signal to .Xr inetd 8 @@ -1993,7 +1993,7 @@ I will first suggest that my IP address should be 0.0.0.0, but I will only accept an address of 192.244.177.38. .It I strongly insist that the peer uses 192.244.177.2 as his own -address and won't permit the use of any IP address but 192.244.177.2. +address and will not permit the use of any IP address but 192.244.177.2. When the peer requests another IP address, I will always suggest that it uses 192.244.177.2. .It @@ -2232,7 +2232,7 @@ be ignored as it is less restrictive than the default mask for your .Sq src_addr ) . .El .Pp -An example for a connection where you don't know your IP number or your +An example for a connection where you do not know your IP number or your ISPs IP number would be: .Bd -literal -offset indent set ifaddr 10.0.0.1/0 10.0.0.2/0 0.0.0.0 0.0.0.0 @@ -2249,7 +2249,7 @@ to .Pa /etc/ppp/ppp.conf (or to .Pa /etc/ppp/ppp.linkup -for setups that don't use +for setups that do not use .Fl auto mode). .Pp @@ -2452,7 +2452,7 @@ This signal, tells .Nm to re-open any existing server socket, dropping all existing diagnostic connections. -Sockets that couldn't previously be opened will be retried. +Sockets that could not previously be opened will be retried. .It USR2 This signal, tells .Nm @@ -2827,7 +2827,7 @@ below) as part of the LCP request. If the peer agrees, both sides will exchange LQR packets at the agreed frequency, allowing detailed link quality monitoring by enabling LQM logging. -If the peer doesn't agree, and if the +If the peer does not agree, and if the .Dq echo option is enabled, .Nm @@ -3459,7 +3459,7 @@ It is useful if you own a small number of real IP numbers that you wish to map to specific machines behind your gateway. .It nat deny_incoming yes|no If set to yes, this command will refuse all incoming packets where an -aliasing link doesn't already exist. +aliasing link does not already exist. ifdef({LOCALNAT},{},{Refer to the .Sx CONCEPTUAL BACKGROUND section of @@ -3941,7 +3941,7 @@ This command deletes the given from the interface. If the .Dq !\& -is used, no error is given if the address isn't currently assigned to +is used, no error is given if the address is not currently assigned to the interface (and no deletion takes place). .It iface show Shows the current state and current addresses for the interface. @@ -4471,13 +4471,13 @@ that has been opened: Carrier is checked one second after the login script is complete. If it's not set, .Nm -assumes that this is because the device doesn't support carrier (which +assumes that this is because the device does not support carrier (which is true for most .Dq laplink NULL-modem cables), logs the fact and stops checking for carrier. .Pp -As ptys don't support the TIOCMGET ioctl, the tty device will switch all +As ptys do not support the TIOCMGET ioctl, the tty device will switch all carrier detection off when it detects that the device is a pty. .It ISDN (i4b) Devices Carrier is checked once per second for 6 seconds. @@ -4493,17 +4493,17 @@ the device is closed. Carrier is always required for PPPoE devices. .El .Pp -All other device types don't support carrier. +All other device types do not support carrier. Setting a carrier value will result in a warning when the device is opened. .Pp Some modems take more than one second after connecting to assert the carrier signal. -If this delay isn't increased, this will result in +If this delay is not increased, this will result in .Nm Ns No 's inability to detect when the link is dropped, as .Nm -assumes that the device isn't asserting carrier. +assumes that the device is not asserting carrier. .Pp The .Dq set cd @@ -4549,7 +4549,7 @@ If .Ar timeout is less than or equal to zero or if .Ar timeout -isn't specified, it is set to the default value of +is not specified, it is set to the default value of .Em 120 seconds . .Pp A choked output queue occurs when @@ -4953,7 +4953,7 @@ Rules are processed in order according to (unless skipped by specifying a rule number as the .Ar action ) . Up to 40 rules may be given for each set. -If a packet doesn't match +If a packet does not match any of the rules in a given set, it is discarded. In the case of .Em in @@ -5063,7 +5063,7 @@ will configure the interface immediately upon reading the .Dq set ifaddr line in the config file. In any other mode, these values are just -used for IPCP negotiations, and the interface isn't configured +used for IPCP negotiations, and the interface is not configured until the IPCP layer is up. .Pp Note that the @@ -5442,7 +5442,7 @@ and files. The load will be attempted before (and in addition to) the normal label search. -If the label doesn't exist, no action is taken and +If the label does not exist, no action is taken and .Nm proceeds to the normal load using the current label. .It RAD_FRAMED_ROUTE @@ -5485,7 +5485,7 @@ would result in a default route to .Pp All RADIUS routes are applied after any sticky routes are applied, making RADIUS routes override configured routes. -This also applies for RADIUS routes that don't {include} the +This also applies for RADIUS routes that do not {include} the .Dv MYADDR or .Dv HISADDR @@ -5537,7 +5537,7 @@ would result in a default route to All RADIUS IPv6 routes are applied after any sticky routes are applied, making RADIUS IPv6 routes override configured routes. This -also applies for RADIUS IPv6 routes that don't {include} the +also applies for RADIUS IPv6 routes that do not {include} the .Dv MYADDR6 or .Dv HISADDR6 @@ -5786,7 +5786,7 @@ but never actually closes the connection despite our sending a terminate acknowledgement. This is also useful if you wish to .Dq set openmode passive -and time out if the peer doesn't send a Configure Request within the +and time out if the peer does not send a Configure Request within the given time. Use .Dq set log +lcp +ccp @@ -5796,7 +5796,7 @@ log the appropriate state transitions. .Pp The default value is zero, where .Nm -doesn't time out in the stopped state. +does not time out in the stopped state. .Pp This value should not be set to less than the openmode delay (see .Dq set openmode diff --git a/usr.sbin/pppctl/pppctl.8 b/usr.sbin/pppctl/pppctl.8 index 0fe1e69..245690f 100644 --- a/usr.sbin/pppctl/pppctl.8 +++ b/usr.sbin/pppctl/pppctl.8 @@ -48,7 +48,7 @@ Both the and .Ar port may be specified numerically if you wish to avoid a DNS lookup -or don't have an entry for the given port in +or do not have an entry for the given port in .Pa /etc/services . .Pp All remaining arguments are concatenated to form the @@ -67,7 +67,7 @@ For example: pppctl 3000 set timeout 300\\; show timeout .Ed .Pp -Don't forget to escape or quote the ';' as it is a special character +Do not forget to escape or quote the ';' as it is a special character for most shells. .Pp If no @@ -142,7 +142,7 @@ can be used to automate many frequent tasks (you can actually control in any mode except interactive mode). Use of the .Fl p -option is discouraged (even in scripts that aren't readable by others) +option is discouraged (even in scripts that are not readable by others) as a .Xr ps 1 listing may reveal your secret. diff --git a/usr.sbin/raycontrol/raycontrol.8 b/usr.sbin/raycontrol/raycontrol.8 index 561f63f..26a910a 100644 --- a/usr.sbin/raycontrol/raycontrol.8 +++ b/usr.sbin/raycontrol/raycontrol.8 @@ -294,7 +294,7 @@ The .Fl S and .Fl Z -options aren't implemented yet. +options are not implemented yet. No access point was available for testing against. .Pp diff --git a/usr.sbin/rpc.umntall/rpc.umntall.8 b/usr.sbin/rpc.umntall/rpc.umntall.8 index edcb176..6236635 100644 --- a/usr.sbin/rpc.umntall/rpc.umntall.8 +++ b/usr.sbin/rpc.umntall/rpc.umntall.8 @@ -95,7 +95,7 @@ existing mount entries. Useful during startup of the system. It may be possible that there are already mounted NFS file systems, so calling -RPC UMOUNT isn't a good idea. +RPC UMOUNT is not a good idea. This is the case if the user has rebooted to 'single user mode' and starts up the system again. .It Fl p Ar path diff --git a/usr.sbin/rpc.yppasswdd/rpc.yppasswdd.8 b/usr.sbin/rpc.yppasswdd/rpc.yppasswdd.8 index ca4c513..f734692 100644 --- a/usr.sbin/rpc.yppasswdd/rpc.yppasswdd.8 +++ b/usr.sbin/rpc.yppasswdd/rpc.yppasswdd.8 @@ -83,7 +83,7 @@ the or .Xr ypchpass 1 commands. -(Some administrators don't want users to be able to change their +(Some administrators do not want users to be able to change their full name information or shells; the server can be invoked with option flags that disallow such changes.) When the server receives an update request, @@ -249,7 +249,7 @@ be either or .Pa /var/yp/master.passwd . The server will check for the latter file first and then use the former -if it can't find it. +if it cannot find it. .Pp Multi-domain mode is off by default since it can fail if there are duplicate or near-duplicate user entries in different domains. @@ -306,7 +306,7 @@ flag to .Nm disables the privileged port check so that it will work with .Xr yppasswd 1 -clients that don't use privileged ports. +clients that do not use privileged ports. This reduces security to a certain small degree, but it might be necessary in cases where it is not possible to change the client behavior. diff --git a/usr.sbin/rpc.ypxfrd/rpc.ypxfrd.8 b/usr.sbin/rpc.ypxfrd/rpc.ypxfrd.8 index cda9472..c8b0f4d 100644 --- a/usr.sbin/rpc.ypxfrd/rpc.ypxfrd.8 +++ b/usr.sbin/rpc.ypxfrd/rpc.ypxfrd.8 @@ -147,4 +147,4 @@ These two packages use vastly different file formats. Furthermore, ndbm is byte-order sensitive and not very smart about it, meaning that am ndbm database created on a big endian -system can't be read on a little endian system. +system cannot be read on a little endian system. diff --git a/usr.sbin/rrenumd/rrenumd.conf.5 b/usr.sbin/rrenumd/rrenumd.conf.5 index c04619d..86df0e0 100644 --- a/usr.sbin/rrenumd/rrenumd.conf.5 +++ b/usr.sbin/rrenumd/rrenumd.conf.5 @@ -288,7 +288,7 @@ add match-prefix fec0:0:0:: /48 use-prefix 3ffe:501:ffff:: /48 keeplen 16; .Ed .Pp .\" -If your routers don't support IPv6 multicast forwarding, +If your routers do not support IPv6 multicast forwarding, you'll need to specify each destination at .Cm dest command. diff --git a/usr.sbin/rwhod/rwhod.8 b/usr.sbin/rwhod/rwhod.8 index 118d80e..642eeeb 100644 --- a/usr.sbin/rwhod/rwhod.8 +++ b/usr.sbin/rwhod/rwhod.8 @@ -144,7 +144,7 @@ reports of old, non-multicasting but, if multicasting is used, those old .Nm Ns s -won't hear the reports generated by this program. +will not hear the reports generated by this program. .El .Pp The server transmits and receives messages at the port indicated diff --git a/usr.sbin/syslogd/syslog.conf.5 b/usr.sbin/syslogd/syslog.conf.5 index b9e0e6f..1e7bbca 100644 --- a/usr.sbin/syslogd/syslog.conf.5 +++ b/usr.sbin/syslogd/syslog.conf.5 @@ -245,7 +245,7 @@ since the latter can easily vary in a networked environment. In some cases, though, an appropriate .Em facility -simply doesn't exist. +simply does not exist. .Pp If a received message matches the specified .Em facility @@ -368,7 +368,7 @@ Upon receipt of a .Dv SIGHUP , .Xr syslogd 8 will close the pipe to the process. -If the process didn't exit +If the process did not exit voluntarily, it will be sent a .Dv SIGTERM signal after a grace period of up to 60 seconds. diff --git a/usr.sbin/syslogd/syslogd.8 b/usr.sbin/syslogd/syslogd.8 index 7e5b7aa..d15b0ab 100644 --- a/usr.sbin/syslogd/syslogd.8 +++ b/usr.sbin/syslogd/syslogd.8 @@ -333,7 +333,7 @@ option is therefore highly recommended. .Pp The .Fl a -matching algorithm doesn't pretend to be very efficient; use of numeric +matching algorithm does not pretend to be very efficient; use of numeric IP addresses is faster than domain name comparison. Since the allowed peer list is being walked linearly, peer groups where frequent messages diff --git a/usr.sbin/trpt/trpt.8 b/usr.sbin/trpt/trpt.8 index 5d3ddbe..19cae477 100644 --- a/usr.sbin/trpt/trpt.8 +++ b/usr.sbin/trpt/trpt.8 @@ -129,7 +129,7 @@ arguments may be used to supplant the defaults. .Sh DIAGNOSTICS .Bl -diag .It no namelist -When the system image doesn't +When the system image does not contain the proper symbols to find the trace buffer; others which should be self explanatory. .El diff --git a/usr.sbin/wicontrol/wicontrol.8 b/usr.sbin/wicontrol/wicontrol.8 index 23a57b3..1d23ceb 100644 --- a/usr.sbin/wicontrol/wicontrol.8 +++ b/usr.sbin/wicontrol/wicontrol.8 @@ -299,7 +299,7 @@ supports it while in IBSS mode. Allow the station to create a service set (IBSS). Permitted values are .Cm 0 -(don't create IBSS) and +(do not create IBSS) and .Cm 1 (enable creation of IBSS). The default is @@ -320,7 +320,7 @@ The can be any text string up to 30 characters long. .Pp Note: this option is provided for experimental purposes only: enabling -the creation of an IBSS on a host system doesn't appear to actually work. +the creation of an IBSS on a host system does not appear to actually work. .It Oo Fl i Oc Ar iface Fl p Ar port_type This flag is deprecated. It should never be used. diff --git a/usr.sbin/yp_mkdb/yp_mkdb.8 b/usr.sbin/yp_mkdb/yp_mkdb.8 index f7b8f22..1251235 100644 --- a/usr.sbin/yp_mkdb/yp_mkdb.8 +++ b/usr.sbin/yp_mkdb/yp_mkdb.8 @@ -121,7 +121,7 @@ If this key is present in a map, it alters the behavior of the 'match' procedure in .Xr ypserv 8 slightly. -If a match query fails (because the server couldn't find +If a match query fails (because the server could not find a record that matched the supplied key), and the .Em YP_INTERDOMAIN key exists within the queried map, diff --git a/usr.sbin/ypbind/ypbind.8 b/usr.sbin/ypbind/ypbind.8 index 4afdb2a..4608814 100644 --- a/usr.sbin/ypbind/ypbind.8 +++ b/usr.sbin/ypbind/ypbind.8 @@ -139,7 +139,7 @@ file. IP addresses may be specified in place of hostnames. If .Nm -can't make sense out of the arguments, it will ignore +cannot make sense out of the arguments, it will ignore the .Fl S flag and continue running normally. diff --git a/usr.sbin/ypserv/ypserv.8 b/usr.sbin/ypserv/ypserv.8 index 9498b65..ad5aa52 100644 --- a/usr.sbin/ypserv/ypserv.8 +++ b/usr.sbin/ypserv/ypserv.8 @@ -106,7 +106,7 @@ the maps are always readable and writable only by root for security reasons. Technically this is only necessary for the password maps, but since the data in the other maps can be found in -other world-readable files anyway, it doesn't hurt and it's considered +other world-readable files anyway, it does not hurt and it's considered good general practice. .Pp The @@ -318,7 +318,7 @@ be used as a master or slave in conjunction with older .Tn NIS servers that only support the v1 protocol. -Fortunately, there probably aren't any +Fortunately, there probably are not any such servers still in use today. .Ss NIS servers that are also NIS clients Care must be taken when running @@ -354,7 +354,7 @@ and maps. By default, if .Nm -can't find an entry for a given host in its hosts maps, it will +cannot find an entry for a given host in its hosts maps, it will return an error and perform no further processing. With the .Fl n |
