diff options
Diffstat (limited to 'usr.sbin/pcvt/Misc/Doc/Keyboard.HP')
| -rw-r--r-- | usr.sbin/pcvt/Misc/Doc/Keyboard.HP | 286 |
1 files changed, 286 insertions, 0 deletions
diff --git a/usr.sbin/pcvt/Misc/Doc/Keyboard.HP b/usr.sbin/pcvt/Misc/Doc/Keyboard.HP new file mode 100644 index 0000000..06ad5b7 --- /dev/null +++ b/usr.sbin/pcvt/Misc/Doc/Keyboard.HP @@ -0,0 +1,286 @@ +================================================================================ +# # +# Function key mapping for the "more HP" - like layout # +# # +================================================================================ + + +I. Function Key Map +======================== + + +PC | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | +Key + _________________________________________________________________________ +UNSHF| 132 | Soft| | | | 7/8 | Dspl| Auto| SCRN| SCRN| SCRN| SCRN| +SYS | Cols|Reset| | | Beep| Bit | Func| Wrap| 0 | 1 | 2 | 3 | +LABEL|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____| +UNSHF| | | | | | | | | SCRN| SCRN| SCRN| SCRN| +USER | F6 | F7 | F8 | F9 | F10 | F11 | F12 | F13 | 0 | 1 | 2 | 3 | +LABEL|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____| + | | | | | | | | | Fkey| U/S |VT/HP| Next| +ALT | F14 | HELP| DO | F17 | F18 | F19 | F20 | F21 |Label|Label| Mode| SCRN| + |_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____| + | User| User| User| User| User| User| User| User| | | | | +SHIFT| F6 | F7 | F8 | F9 | F10 | F11 | F12 | F13 | | | | | + |_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____| +ALT- | User| User| User| User| User| User| User| User| | | | | +SHIFT| F14 | F15 | F16 | F17 | F18 | F19 | F20 | F21 | | | | | + |_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____| +CTRL-| SCRN| SCRN| SCRN| SCRN| SCRN| SCRN| SCRN| SCRN| SCRN| SCRN| SCRN| SCRN| +ALT | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | + |_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____|_____| + +PC | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | +Key + + + +II. Special Keys Used To Change The General Runtime Functionality +===================================================================== + + + To be consistent with XFfree86 2.0 Virtual Screen switching, it is + now also possible to switch screens by using: + + CTRL - ALT - Fx , where x can be 1 ... No of screens compiled, + see the definition of PCVT_NSCREENS ! + + + Virtual Screen/Terminal switching + --------------------------------- + + F9 or CTRL-ALT-F1 switches to screen 0 + F10 or CTRL-ALT-F2 switches to screen 1 + F11 or CTRL-ALT-F3 switches to screen 2 + F12 or CTRL-ALT-F4 switches to screen 3 + CTRL-ALT-F5 switches to screen 4 + CTRL-ALT-F6 switches to screen 5 + CTRL-ALT-F7 switches to screen 6 + CTRL-ALT-F8 switches to screen 7 + CTRL-ALT-F9 switches to screen 8 + CTRL-ALT-F10 switches to screen 9 + CTRL-ALT-F11 switches to screen 10 + CTRL-ALT-F12 switches to screen 11 + + (see also ALT-F12 below) + + + ALT-F9 Function key labels ON / OFF + ------------------------------------ + + this key is only operational, when in HP/VT mode, see F11 + + ALT-F9 toggles between function key labels displayed or not. + + ON: screen has either 25-3 = 22, 28-3 = 25 or 50-3 = 47 lines + 2 lines fkey labels displayed + row/col display enabled + 1 line status/load avg line + + OFF: screen has either 25-3 = 22, 28-3 = 25 or 50-3 = 47 lines + no function key labels displayed + no row/col display + no status/load avg line + + applicable escape sequences: + + switch OFF: + ESC & j @ remove labels from screen + + switch ON: + ESC & j A display system fkey labels + ESC & j B display user fkey labels + ESC & j C display current fkey labels + + + ALT-F10 User / System Function key labels + ----------------------------------------- + + this key is only operational, when in HP/VT mode, see ALT-F11 + + ALT-F10 toggles between the display of user or system + function key labels + + this key is only active if labels are toggled on via + the ALT-F9 function key + + screen has either 25-3 = 22, 28-3 = 25 or 50-3 = 47 lines + 2 lines fkey labels displayed + row/col display enabled + 1 line status/load avg line + + + applicable escape sequences: (see above) + + ESC & j A display system fkey labels + ESC & j B display user fkey labels + ESC & j C display current fkey labels + + + ALT-F11 Toggle between pure VT and HP-VT Emulation + -------------------------------------------------- + + This key switches between pure vt100/vt220 mode and + vt100/vt220 with hp-fkey-labels mode of operation. + this is not dependent of any screen resolution the + virtual consoles are in. + + initially, after power on, all virtual screens are in + the pure vt-mode: + + - the emulator does not execute any hp escape sequences + - the function key label lines are switched off + - no load average or status line is displayed + - no row / column counter is displayed + - no window number is displayed + - the full screen 25x80, 28x80 or 50x80 is usable + - ALT-F9 and ALT-F10 have no function + + when toggled to the vt/hp mix of operation, the following + changes take place: + + - the emulator executes the supported hp-esc sequences + - the function key labels are displayable depending + on the state of ALT-F9/F10 + - the load average is displayed + - the row / column counters are displayed + - the window number is displayed in the lower right corner + - in any screen resolution, the last 3 lines are lost, + so one has a 22x80, 25x80 and 47x80 resolution + - F9 and F10 are operational. + + when switching modes by means of ALT-F11, the following + changes to the current environment, the emulator may + be in, apply: + + - the screen is cleared + - the cursor moves to the home position + - the scrolling region is reset to default + + (this functionality is available via an ioctl) + + ALT-F12 Cycle current screen + ---------------------------- + + This key cycles through the display of the video + screens. on startup, screen 0 is displayed; with every + keypress of F12, the next screen is displayed, wrapping + from the maximum screen number back to screen 0. + + (this functionality is available via an ioctl) + + +III. Special Keys used to change the Runtime Functionality of a Page +======================================================================= + + when in mixed HP/VT mode, one has two types of function key labels + on screen, user function keys and system function keys. + + this functionality is NOT available in pure VT220 mode ! + + the user function keys emit the below mentioned VT220 function- + key sequences. the labels can be reprogrammed by use of escape + sequences. + + in system function key mode, several pre-programmed functions inside + the emulator can be toggled, currently implemented are: + + - F1, if a chipset is detected for which 132 operation is supported, + F1 toggles between 80 columns and 132 columns. + - F2, does a soft reset of the emulator code + - F3, -/- + - F4, -/- + - F5, toggle the audible beep generation + - F6, toggle 7/8 bit char width + - F7, toggle display functions. this means that control codes + in the range 0x00 to 0x1f are not EXECUTED by the emulator + any longer, but displayed on the screen + - F8, toggle automatic cursor wraparound at end of line + + these functions operate just for the selected screen + + +IV. Keyboard VT220 compatibility +==================================== + + The following keys behave different as probably expected. + + They were mapped to provide more VT220 compatibility. + + To have F1-F8 emit something in HP-mode, you have to switch + to user function key labels by using ALT-F10 (see ALT-F10 above) ! + + PC Keyboard VT220 Keyboard + ------------- -------------------------------------------------- + F1 F6 (ESC [ 17 ~) + F2 F7 (ESC [ 18 ~) + F3 F8 (ESC [ 19 ~) + F4 F9 (ESC [ 20 ~) + F5 F10 (ESC [ 21 ~) + F6 F11 (ESC [ 23 ~) + F7 F12 (ESC [ 24 ~) + F8 F13 (ESC [ 25 ~) + ALT-F1 F14 (ESC [ 26 ~) + ALT-F2 HELP (ESC [ 28 ~) + ALT-F3 DO (ESC [ 29 ~) + ALT-F4 F17 (ESC [ 31 ~) + ALT-F5 F18 (ESC [ 32 ~) + ALT-F6 F19 (ESC [ 33 ~) + ALT-F7 F20 (ESC [ 34 ~) + ALT-F8 F21 (ESC [ 35 ~) (i know !!!!) + + SHIFT-F1 ... SHIFT-F8 + User Defined Keys for F6 - F13 + + ALT-SHIFT-F1 ... ALT-SHIFT-F8 + User Defined Keys for F14 - F20 + + Insert Insert Here (ESC [ 2 ~) + + Delete Remove (ESC [ 3 ~) + + Home Find (ESC [ 1 ~) + + End Select (ESC [ 4 ~) + + PgUp Prev Screen (ESC [ 5 ~) + + PgDn Next Screen (ESC [ 6 ~) + + PrtSc (ignored) + + Pause (ignored) + + Break (ignored) + + Cursor Keys dependent upon state of cursor key mode either + ESC [ A ... ESC [ D or ESC O A ... ESC O D + + NumLock toggles Numeric Keypad for Keypad Numeric Mode + and Keypad Application Mode + + ALT-Keypad-0 can be used to generate any keycode in the + ALT-Keypad-1 rage 0-255. + ALT-Keypad-2 this was modeled with the behaviour of a + ALT-Keypad-3 popular boot loader in mind + ALT-Keypad-4 + ALT-Keypad-5 + ALT-Keypad-6 + ALT-Keypad-7 + ALT-Keypad-8 + ALT-Keypad-9 + + Numeric Keypad dependent upon state of keypad numeric/application + mode either 0 ... 9 or ESC O p ... ESC O y + + ALT-NumLock emits PF1 sequence (ESC O P) + + ALT-Keypad-/ emits PF2 sequence (ESC O Q) + + ALT-Keypad-* emits PF3 sequence (ESC O R) + + ALT-Keypad-- emits PF4 sequence (ESC O S) + + +/* EOF */ |
