diff options
Diffstat (limited to 'usr.sbin/pcvt/Misc/Doc/ChangeLog')
-rw-r--r-- | usr.sbin/pcvt/Misc/Doc/ChangeLog | 899 |
1 files changed, 899 insertions, 0 deletions
diff --git a/usr.sbin/pcvt/Misc/Doc/ChangeLog b/usr.sbin/pcvt/Misc/Doc/ChangeLog new file mode 100644 index 0000000..2e8547e --- /dev/null +++ b/usr.sbin/pcvt/Misc/Doc/ChangeLog @@ -0,0 +1,899 @@ +ChangeLog last edit-date: [Thu Apr 6 10:52:50 1995] +================================================================================ + +Changes 3.10 -> 3.20 April 1995 +-------------------------------------------------------------------------------- + +- bugfix from Thomas Eberhardt: the force 24 lines enable function key + label was not updated when changing force 24 lines mode with + 'scon -f on|off', this is now fixed. + +- bugfix from John Kohl fixing divide by zero problem in pcvt_ext.c when + ringing the bell and pitch is 0: this avoids an integer divide + trap in supervisor mode. + +- changed the default behaviour of keyboard controller delay from using + delay()/DELAY() to using dummy reads to port 0x84 because i got + keyboard hangs in X. + +- bugfix: in pcvt_ext.c, MDA state restore when leaving X was lost, should + function now again. + +- renamed PCVT_XSERVER to XSERVER in ispcvt.c + +- bugfix in pcvt_vtf.c: renamed PCVT_USL_COMPAT to PCVT_USL_VT_COMPAT + +- added '-d <device>' option to ispcvt and loadfont + +- removed PCVT_NEEDPG + +- almost completely removed support for 386BSD 0.1 with patchkit 0.2.4 + +- applied a patch from Joerg providing missing FreeBSD 2.1 functionality and + a some minor bugfixes and checks. + +- provide a single place PCVT_KBD_DELAY in pcvt_hdr.h. made it configurable + via PCVT_PORTIO_DELAY to use either 6 dummy reads from port 0x84 + or the delay/DELAY function of the operating system. Changed ispcvt + to report status of compile time switch. + +- release beta 23 -------------------------------------------------------------- + +- removed some files for 386BSD as there is virtually noone outside + using it anymore + +- make pcvt_ioctl.h accept "KERNEL" or "_KERNEL" for NetBSD-current + +- configuration fix: patch from Rafal Boni for pcvt_vtf.c, he writes: + This patch lets one compile pcvt on a system that is lacking XSERVER + and UCONSOLE [or either?] in the config file. I found this while + trying to build a minimal floppy-based test kernel. The problem is + that roll_up and roll_down assume that PCVT_USL_COMPAT is + unconditionally set, and hence muck with parts of the video structure + that are only there if PCVT_USL_COMPAT is set. + (generalized the patch a bit so that fastscroll functionality is + not lost in case of PCVT_USL_COMPAT not being defined. -hm) + +- bugfix: pcvt_ext.c switch_screen() - when switching to a 25 line charset + pure VT emulation screen which has force 24 lines set, then we have + to clear the last line on screen (bugreport from Joerg). + +- added define PCVT_NONRESP_KEYB_TRY for how many times to try to detect + a non-connected keyboard. This was previously set to 100 and + Joerg reports a 5+ minutes delay for a 386 booting without keyboard. + Set to 25 now in the definition. Also made shure the messages in + the corresponding loop display only once. [doreset() in pcvt_kbd.c] + +- updated kbdio utility to include the 7 us delay and added a 'what' command + detect type of MCA motherboard keyboard controller according to + Frank van Gilluwe, "The Undocumented PC", Addison Wesley, pp 273 + +- "Gateway 2000" problem: after some discussion on the NetBSD port-i386 + mailing list about hanging keyboards, Martin Husemann sent in a + patch where each inb(CONTROLLER_DATA) is now preceeded by a + delay(6). This fixed his keyboard problem, the same was reported + from Roland McGrath for his Gateway 2000 keyboard/machine. + +- patch from John Kohl for usl_vt_ioctl() in file pcvt_ext.c, he writes: + This is probably a long standing bug. tsleep() returns ERESTART + if it's interrupted. ERESTART is -1, which means that the + VT_WAITACTIVE call returns from usl_vt_ioctl() with -1, + meaning "not one of my ioctl's". + +- patch from Matthieu Herrb for NetBSD-current (post 1.0) support + +- patch from Joerg for FreeBSD pre-2.1 support + +- added file ToDo in directory Doc + +- fix for Util/Makefile.inc.NetBSD-c from Onno + +- removing unnecessary Trident support code from pcvt_out.c + +- fix from Onno for IST_EDGE in NetBSD-current + +- patch from Thomas Eberhardt to fix the bell frequency and duration setting + for NetBSD + +- some fixes from Onno van der Linden for NetBSD + +- added patch for NetBSD-current from Rafal Boni and Lon Willett + +- added another mega patch from Lon Willett fixing several bugs: + + 1 -- Misc porting changes to deal with NetBSD-current, including + a new Util/Makefile.inc.NetBSD-current. + + 2 -- The Control_R scancodes were being mapped to the Control_L + pcvt keynum. + + 3 -- FASTSCROLL/graphics-mode problem: there was a problem where + switching from a graphics screen to a text screen would corrupt + the text screen's content if it had been scrolling using the + FASTSCROLL code. (The problem is the bcopy() from kernel to + video memory was using the vs[i].Memory pointer as the source, + instead of the vs[i].Crtat pointer). This is fixed in the beta + 21 release by just disabling the fast scroll code for screens + which aren't active. + + The patch I'm sending you re-enables the fast scroll code on + inactive (i.e. in kernel memory) screens, saving a few cpu + cycles. + + 4 -- This is a big one: running multiple X servers was not + really working. The USL handshaking code was a mess (not very + well designed to begin with, but there's not much that can be + done about that). I did manage to get it fairly functional, but + there's a lot of changes. + +- changing example rc.local to take care of good old EGA's + +- fixing support for EGA boards in vt_coldinit() + +- removing vt100 font files from Util/fonts, updated Manifest + +- fixing an obviously longstanding bug in roll_up() / roll_down() which was + triggered by Joergs "Crtat" cleanup mega patch. + +- removing PCVT_FAKE_SYSCONS10 + +- removing duplicate names in termcap entries + +- fixing vt_coldinit: setting variable "color" for mda/hercules and cga + initializing cursor position + +- fixing roll_up() and roll_down() for mda/hercules: mda's have ALWAYS + just one page of memory, original hercules boards too so they + can NEVER use the fastscroll option. SOME hercules are somehow + enhanced in that they support 2 pages. pcvt now just supports + one page hercules/mda! + +- made cleanups to 8x14 high and 8x8 high fonts: adjust the 5 scanline + characters to adjust with the corner characters from the low fonts + +- applying patch from Joerg which fixes some bugs: + + writing to a tty containing an X server resulted in some stange + behaviour depending on the opsys and opsys version used + + the init code preserving the screen contents and cursor shape + can only be done on boards allowing the reading of + several crtc registers + +- removed bcopyb declaration from pcvt_hdr.h for FreeBSD 2.1 + +- another patch from Lon Willett (willett@math.utah.edu), he writes: + + 1 -- Very minor: One of my previous changes didn't get merged + into "pcvt_out.c"; the caclulation of ws_row doesn't account for + "force24" at one spot. It's easier to just set it from + screen_rows anyway, unless there's something that I didn't + understand happening here. + + 2 -- Debugging stuff: I don't know if you care to add it, but I + found it useful, so I left it in. I rearranged the + PCVT_SHOWKEYS code a little, and added a few lines to show + keyboard commands and responses, with special delimiters. + [file: pcvt_kbd.c] + + 3 -- "kcon" utility enhancement: I added a "-R" switch to kcon + to do a KBDRESET ioctl. [file: Util/kcon/kcon.c] + + 4 -- KBDRESET-ioctl bug: the code was trying to read kbd + responses without an spltty(), so naturally it would fail, since + pcrint() was grabbing the ACKs. [file: pcvt_kbd.c] + + 5 -- update_led() makes kbd hang: the problem here is that + update_led() makes the keyboard generate two KEYB_R_ACK + responses, and one of the interrupts sometimes gets lost when + there is a lot of other I/O happening. See the comment in the + code. My fix seems to work for me, but you may want to handle + it some other way. It would probably be quite reasonable to + check for lost interrupts periodically anyway, whether + update_led() has been called or not. [file: pcvt_kbd.c] + + (NOTE: item 5 has been disabled because it causes older + FreeBSD's to panic because of the timer queue not being + initialized at the time called. -hm) + +- partly rewrote doreset() in pcvt_kbd.c to enable boot procedure to proceed + if no (PC) keyboard is found. The current behaviour and implementation + is subject to change. + +- patch from Thomas Gellekum to Util/keycap/keycap.src + +- minor modification to main.c in Util/set2061 + +- patch from Onno and John Kohl to make pcvt beta 16 work on NetBSD current: + 1. pcvt_conf.h + _real_ 1.0 ===> NetBSD1_0 == 1 + current 1.0 (1.0A) ===> NetBSD1_0 == 2 + 2. pcvt_hdr.h + Put pcvt_conf.h before _all_ the #ifdef PCVT_*. This way + the #ifdef NetBSDx_y stuff can do its work. + +- size of PCVT_BURST was still reported as 1 for FreeBSD 2.0, fixed + +- made some adjustments for FreeBSD 2.0 in Util/vgaio + +- Another patch from Joerg for FreeBSD 2.0 + +- included vgaio, kbdio and set2061 into the outer Makefile, this programs + are build and cleaned but don't install anything. + All program's in the Util dir should now cleanly make <anything> ... + +- enable 132 column support for Trident TVGA8900CL, some NetBSDisms + +- addend patch from Joerg for pcvt-320b7 to fix FreeBSD 2.0's ttymalloc's + encapsulation into #if's. Also new keycap.src entry. + +- fixed keyboard status/LED not updated on soft reset emulator + +- on 23rd of December i had some spare time, so i added some demos to the + Util/demo directory as well a a time-killer program (playvt) to view + some of the VT animations and a christmas animation i got from Joerg. + +- added a new utility set2061 to program the clock generator on my S3 based + ELSA Winner VGA board. This eventually lets me use 132 columns on this + board, because i'm now able to program the clock to generate 40MHz + on clock output #2. + +- debugged winsize patch on FreeBSD 1.1, line discipline open init's the + queues, winsize initialization must happen after line disc. open! + +- got a bunch of NetBSD PR's from J.T. Conklin: + + PR #214: PCVT treats ctrl-shift exactly like shift for most characters. + (fixed by Lon Willet's Mega Patch described below -hm) + + PR #399: If you define PCVT_META_ESC when builting PCVT, Meta-Return + sends 0x8d instead of ESC RET. + (fixed by applying the patch from Bill Sommerfeld. -hm) + + PR #400: pcvt sometimes gets confused about window size + (fixed by applying the patch from Bill Sommerfeld. -hm) + + PR #404: Meta-Control-Space broken with PCVT_META_ESC and PCVT_NULLCHARS + (put into "BugList" file, no solution yet .. -hm) + + PR #488: pcvt can loose keyboard control if you start an xserver from + an xterm + (already fixed by a patch from John Kohl, see below -hm) + + PR #580: NetBSD i386/pcvt bugs/enhancements; fixes included + (already integrated the patch from Lon Willet, see below -hm) + +- on coldinit, if FAT_CURSOR is defined, the old large blockcursor is used + +- enhanced the vgaio output in an attempt to make 132 column mode work + for my S3 board .... + +- applied patch from Thomas Gellekum: install instructions for FreeBSD 2.0, + patch to fontedit to compile under FreeBSD 2.0, an addition to + keycap.src and a fix for kbdio + +- changed installation instructions to reflect recent changes, removed + instructions for FreeBSD 1.0 and added instructions for FreeBSD 2.0 + +- upgraded all utilities version strings to 3.20 + +- new example of rc.local + +- changing timeout()/untimeout() function parameter type to TIMEOUT_FUNC_T + definition in pcvt_hdr.h + +- changed install instructions to reference Etc dir instead of Doc dir for + several files which were moved from Doc to Etc. + +- new parameter -d for the cursor utility, updated cursor manpage + +- applying a patch from Lon Willett, willett@math.utah.edu which fixes + several bugs and provides some enhancements. Lon writes: + + 1 -- The displayed cursor is not updated during kernel I/O, + because async_update() doesn't get called. This is merely ugly + while the system startup messages are being displayed, but it is + positively annoying when using the kernel debugger. + + 2 -- CONTROL-SHIFT-<KEY> is taken to be the same as SHIFT-<KEY>. + It should be interpretted as CONTROL-<KEY>, or even have its own + binding. One of the lines below fixes it in the former way. + This is especially bad (i.e. clearly buggy) when I type + CONTROL-SHIFT-<6/^> to get a "Control-^", and instead get a "^". + + 3 -- The "special" region at the bottom of the screen, i.e. the + function-key-labels/status-line in HPVT mode, and the blank line + in FORCE24LINES mode, do not get properly cleared/updated. + + 4 -- When switching screen sizes/modes, the FORCE24LINES setting + is not always handled. + + 5 -- The PCVT_VT220KEYB functions are missing some features. + The control key settings are bug fixes; they apply only if + system function key labels are on, and match the labels. The + shift key definitions are enhancements. + + The new keys (previously undefined) are: + + Control-F1 -- toggle 80/132 columns + Control-F2 -- soft reset emulator + Control-F3 -- toggle force 24 lines mode + Control-F4 -- toggle keyboard debugging + + Shift-F1 -- select screen 4 + Shift-F2 -- select screen 5 + Shift-F3 -- select screen 6 + Shift-F4 -- select screen 7 + Shift-F5 -- select (current screen - 1) + + 6 -- [Enhancement] The initial startup screen is cleared, and + the screen gets cleared when changing modes/sizes. I don't like + this. I want a chance to see bootstrap loader messages, and I + also want the command "scon -d/dev/ttyv0 -H -s28" in my + rc.local, but then I lose various messages from daemons, etc + (which aren't always logged to syslog). So I have fixed the + code so that it tries to preserve the contents of the screen + when starting up, and when changing modes/sizes. + + 7 -- [Enhancement?] I added code to preserve the initial cursor + shape at startup. This isn't really necessary, since the + "cursor" command can be used to set it to your preference; but + it seems like this is the preferable policy to use for the + default. + +- applying patches from Onno van der Linden and Martin Husemann: adding + support for post 1.0 NetBSD-current and adding PCVT_NO_LED_UPDATE + +- patch from Joerg Wunsch: support for FreeBSD 2.0 and better support + for serial console coexistence + +- bugreport from Michael Havemester regarding PCVT_NOFASTSCROLL: it was + not enabled in pcvt_vtf.c, fixed. + +- renamed pcvt_disable_intr and pcvt_enable_intr to PCVT_DISABLE_INTR and + PCVT_ENABLE_INTR (Joerg) + +- attempt to automatically compile time configure in pcvt_conf.h, how + does FreeBSD do this ? should work for NetBSD (from Onno v.d. Linden) + +- split off pcvt_kbd.h from pcvt_kbd.c, file > 100k + +- split off pcvt_config.h from pcvt_hdr.h. All compile time configurations + should be put into pcvt_config.h now. + +- moved version definitions to begin of file in pcvt_ioctl.h and pcvt_hdr.h + +- fixing NetBSD #ifdef in pcvt_drv.c + +- fixed bug in scon. when doing "scon -c <num>" the destination screen was + cleared, this is fixed now by properly setting "force_24lines" + +- added kbdio utility from Joerg into Util directory + +- changed font dir from /usr/share/misc/vgafonts to /usr/share/misc/pcvtfonts + +- Fix for Gateway 2000 keyboard problems from Brian Moore + +- Starting to implement more keymoard mapping layers in pcvt_kbd.c. This + section is a building site, enclosed in NOT_YET_DEF ifdef's + +- VT_SETMODE ioctl patch from John Kohl <jtk@kolvir.blrc.ma.us>, see text + from John in the source file pcvt_ext.c + +- patch from Joerg for kbd_emulate_pc(), intro of timeout + +- fixed bug in soft/hard reset and real system fkey labels + +- added patch from Joerg for FreeBSD 1.1.5.1R + +- fixed both SR and SF entries in termcap database file + +- removed SR entry in termcap database file (bugreport from John Perry) + +- bugfix in cirrus 132 column switching got from Onno/Charles + +- french keycap database entry from Matthieu Herrb + +- cleanup patch from Joerg for Util/demo/Makefile und Util/fonts/Makefile + + +Changes 3.00 -> 3.10 June 1994 +-------------------------------------------------------------------------------- + +- patch from Joerg correcting my assumed timeout/untimeout FreeBSD casts + +- adjusted some #if's while validating NetBSD 0.9 and NetBSD-current + +- rolled in Joerg's changes for a pre-1.1.5 (?) FreeBSD-current + +- Util/fonts: install only the necessary fontfiles, vt100 not used anymore + +- updated and commented Etc/rc.local and updated to more recent /etc/ttys files + +- updated all installation instructions and changed their names + +- documenting more PCVT_ options in pcvt_hdr.h + +- adding CONF_ options to driver config ioctl and upgrading ispcvt + +- commenting the source, housekeeping, step up to 3.10 beta 2 + +- casting timeout()/untimeout() for FreeBSD 1.1R :-( + +- unprotecting vgapage() routine with #if !PCVT_KBD_FIFO + +- adding Michael Havemester's keyboard fifo diffs to source tree + +- pcvt_drv.c: made declaration of Crtat global for this file for NetBSD + +- changing Util/fonts/Makefile and Util/demo/Makefile to run in all + supported environments + +- moving inline from pcvt_vtf.h into pcvt_hdr.h, i still feel that this is + not the best solution, but i got annoyed by the 10 line pcvt_vtf.h + +- bugfix, in hpmode, clear last 4 lines when 28 column mode and force + 24 lines are true + +- applying patch from Thomas Gellekum <thomas@ghpc8.ihf.rwth-aachen.de>: + - discard escape sequences ESC space F and ESC space G + - discard escape sequences DECELR = enable locator report + and DECSLE = select type of locator event + - disable scrolling when writing outside the scrolling region + at an absolute position. + + [ pcvt now seems to be "VAX resistant" :-) ] + +- optional switch to screen 0 can be done on kernel/console output + +- fixed kernel output cursor positioning + +- removed PCVT_FORCE8BIT + +- pcvt_ext.c, changed screen switching bcopyb's to bcopy's + +- new patch from Onno to support all BIOS versions of the Cirrus chipset. + +- pcvt_x_hook() has to care about fkey labels now + +- updated Doc/NotesAndHints and Doc/BugList + +- applied patch from Onno van der Linden for updated Cirrus chipset support + +- updated Doc/Bibliography + +- removed paranoid delay()/DELAY() from vga_test() + +- added prototype ttrstrt() into pcvt_drv.c for NetBSD 0.9 + +- made INSTALLATION.NetBSD and INSTALLATION.NetBSD.bundled from mycrofts base + +- Charles Hannum took Michael Havemesters speedup modifications, made some + further enhancements and after adding support for pcvt, put it into + the NetBSD-current tree. THANK YOU, Charles ! + The NetBSD version of May 20th '94 was taken as the base for 3.10. + + +Changes 2.20 -> 3.00 March 1994 +-------------------------------------------------------------------------------- + +- Release 3.00 + +- last minute patch from Joerg (pcvt_hdr.h, BugList, NotesAndHints) + +- included speedup patch from Michael Havemester as Etc/LAST-MINUTE + +- updated Doc/pcvt.4 + +- removed bug in Util/ispcvt/Makefile which caused ispcvt to be installed + into /usr/sbin and /usr/local/bin + +- split ioctl VGAPCVTID into two: intro of ioctl VGAPCVTINFO for compile + time options only. + VGAPCVTID is now frozen for identification purposes (XFree86 3.0) + updated Util/ispcvt for the above mentioned changes + +- issued patch to upgrade beta14 to beta16 + +- bugfix: when scrolling up (bcopy) is interrupted by a keystroke requesting + a change of the current screen, the "new" screen is scrolled up. Fixed + in pcvt_kbd.c and pcvt_out.c (check_scroll) + +- fixed bug "Jumping through vt's with ALT-F12 does jump over vt0" + +- PCVT_PCBURST intro, update of ioctl and Util/ispcvt + +- NetBSD speedup patch from Michael Havemester (factor 6-10) + +- issued patch to upgrade beta14 to beta15 (never officially announced) + +- added patch for ttioctl parameters NetBSD-current 12 Feb 94 from Michael + Havemester in pcvt_drv.c + +- INSTALLATION.xxx(x)BSD upgraded to reflect changes in Util and NetBSD-current + +- struct pcvtid changed to hold the value of PCVT_xxx(x)BSD, ispcvt upgraded + +- applied patch from Szabolcs Szigeti for 132 column operation for Trident + TVGA 8900B and TVGA8900C based boards + +- PCVT_NETBSD can/must now be 1 or 09 for Release 0.9 and > 09 for current + +- applied patches from John Brezak and Szabolcs Szigeti for recent + NetBSD-current changes (syscframe -> trapframe) + +- in Util, removed Makefile.inc. Make Makefile.inc.FreeBSD and + Makefile.inc.NetBSD and added a check to the toplevel and every + other Makefile in this part of the tree. sigh ... + +- patch from Joerg for pcvt.4 Makefile and Debugger in FreeBSD + +- issued pcvt-beta14, code freeze for 3.00 release, just bugfixes now + +- INSTALLATION.FreeBSD and a small cleanup patch from Joerg + +- large patch from Joerg to get pcvt FreeBSD-current compliant + +- permission/owner cleanup, files:664, dirs:775, user:root, group:wheel + +- got rid of the verbose error message when installing in Util/fonts + +- new make-method in Util/kcon to workaround make portability problems + +- NetBSD-current detection workaroundaroundaround for NEW_AVERRUNNABLE in + pcvt_header.h + +- MONO_BUF and COLOR_BUF now ifndef'ed + +- fixed typo in pcvt_kbd.h in cfkey11() and cfkey12() + +- machine/pio.h must be included in pcvt_hdr.h for recent NetBSD-current + +- protected every tsleep call with an "if(curproc)" otherwise there is + chance to panic the system (Joerg has an idea why ...) + +- more fixes from Joerg: keyboard scansets fixed, X server is now aware + of redefined keys (ioctl implemented) + +- patch from Heiko Rupp, configuration with XSERVER not defined didn't compile + +- new version of vgaio from Joerg installed + +- large keyboard cleanup patch from Joerg merged in + +- bugfixes from Joerg: fix crash on not-open vt, remove pcxint, add option + PCVT_INHIBIT_NUMLOCK (for notebook owners :-), support for EGA/VGA + fonts with up to 32 scanlines. + +- included vgaio, a program to read/write vga register values from Joerg. + +- included mcon, the keyboard mouse emulator control program from Joerg. + +- applied averrunnable patch to satisfy the most recent NetBSD-current. + +- fixing cursor not updated bug if usl/vt server is running on vt0 + +- polished some chars in Util/fonts/vt220l.810, fixed all permissions in + the uuencoded fontfiles. + +- debugged the EGA/VGA curses based font editor 'fed' in Util/fed. It seems + it's working ok now now. + +- updated copyright header files + +- synchronize asynchronous cursor position update with having a valid + (new) cursor (row) position from sputc(). (Otherwise a cursor + would appear temporarily in the first position of the first + function key label in the HP mode) + +- updated screeninfo ioctl and scon to report the monitor type + +- added file Doc/Notes for random notes and hints for pcvt-users. + +- enhanced the pcvtid-ioctl and the ispcvt(8) utility to print out the + values of all "PCVT_XXXXXX" compile time options. + +- included work from Joerg to convert all ifdef's to if's, to be able + to compile various configurations of pcvt without changing + options in the header file. + +- included (currently untested !) patch for a keyboard mouse emulator + from Joerg. (he got problems after he bought a notebook with + just one serial port, which he wanted to use for slip ...) + +- screensaver reset is now also done asynchronously to get more speed. the + function average() was renamed to async_update(). + +- cursor position update and cursor position display in HP mode is now done + asynchronously in function average() in pcvt_sup.c. the function + update_cursor does no longer exist. this gave about 10..30% increase + in speed depending on the data cat'ed (termcap, kernel, 1Mb nulls) + +- HP function key emulation processing debugged, this has to be rewritten + to use a stack and a new parser. elm -K now works a bit more, the + display is not garbled anymore, but fkey strings do not work. + +- pcvt_vtf.c split off from pcvt_out.c, file got > 100k. Checked all + forward declarations in header and source files + +- 132 column support for Cirrus Logic CL-GD542X chipsets written by + Onno van der Linden, c/o vdlinden@fwi.uva.nl + +- keyboard scancode display (#define PCVT_SHOWKEYS) + +- printscreen keycode fix form Onno van der Linden + +- Util/Makefile.inc added .depend dependency for make depend + +- pcvt_ioctl.h is now installed into /usr/include/machine. + +- keyboard scancode 1 is now used by default, perhaps it cures some problems + +- support for keyboard scancodes sets 1 and 2 (compile time selectable via + PCVT_SCANSET), patch from Onno van der Linden, c/o vdlinden@fwi.uva.nl + +- Util/fontedit.c updated to "#if defined (__386BSD__) || defined (__NetBSD__)" + (suggested by Mark Weaver, Mark_Weaver@brown.edu) + +- 132 column support for S3 86c928 chipsets + +- split off pcvt_ext.c from pcvt_sup.c, it was more than 100k .... + +- intro of Doc/Manifest and Doc/TestedHardware, removed README.X-PATCH because + it was now really outdated + +- superprobe compatibility patches from Joerg + +- intro of file Doc/BugList + +- another powerpatch from Joerg: + - some vgaioctl's are now available if in X mode (i.e. to scon to + another screen from within an xterm) + - removed bug in keyboardhandling, numlock'ed numkeys did send an + additional null (0x00) char, this has been fixed now. + - SysRq key made functional + +- made force 24 lines (see below) the default configuration to have a well + behaving vt220 emulator at startup. + +- every vt now has a separate caps-lock, num-lock and scroll-lock flag and + a separate handling of these lock-keys. + +- made sleeping in case of scroll lock working from an earlier patch from Joerg. + +- large patch from Joerg: + - Doc/pcvt.4 updated to reflect recent changes + - struct winsize set ok when switching between HP/VT + - struct winsize pixels reflect real values now + - ioctl for switching between 80 and 132 cols + - 132 columns for generic VGA's + - updated scon to provide access to ioctl 80/132 col switching + +- removed pcconcoftc and kbdsoftc structures from header files, removed + pcconsintr variable and introduced kbd polling synchronization + variable kbd_polling. + +- merging Joerg's patch to support 132 columns on Tseng Labs ET3000 + +- moved Util/uemacs/* --> Etc/uemacs.tar.Z.uu + +- added patches from Joerg for new Makefiles in Util + +- added keyboard security define's to the new X server code + +- adding bugfixes from Joerg Wunsch for "old" (= non vt switching) X server + +- Control-Alt-Functionkey(1...12) switches now virtual screens/terminals to + behave consistently with xfree 2.0, also the pages are now checked + against the real no. of terminals available ALL the time ... + +- pcvt_hdr.h: changed "int pcstart();" to "void pcstart();" to avoid warning + message when compiling under NetBSD-current + +- Doc dir split into Doc and Etc, Support renamed to Util + +- adding NetBSD-current support for new X server support (syscframe changed + to trapframe in NetBSD-current as of 11/11/93) + +- adding Joergs changes for XFree86 2.0 multiple X server and/or terminal + session support + +- adding entries from patchkit 0.2.4 codrv keymap to Support/keycap/keycap.src + +- Keyboard security introduced into the XSERVER dependent part in pcvt_drv.c + +- renamed device files from /dev/ttycXX to /dev/ttyvXX + +- added file Doc/pcvt.el from Joerg Wunsch to distribution + +- added HP-mode function key map from Gordon L. Burditt to description + in Doc/Keyboard.HP + +- fixed bug in scon which prevents it from showing the correct status of + 132 column support of chipset + +- 132 column mode for Trident TVGA9000 works now, after 2 1/5 months of + calling everybody i eventually got a tech ref manual from Trident .... + +- it is now possible to "force" pcvt into a 24 line mode when operating + in pure VT mode with 25 lines or in HP mode with 28 lines. This + is sometimes necessary when running software which assumes it runs + on a "real" VT220 which has just 24 lines. + +- updated scon to support the 24 lines force mode (scon -f [ on | off ]) + +- soft reset fkey now positions cursor into left upper corner, update_cursor() + made global function + +- updated scon (-l) to print out additional info about the vga chipset, + family and 132 column support if VGA detected. + +- added additional fields to screeninfo structure in pcvt_ioctl.h to be + able to return information about current vga chipset. + +- moved VGA type/family definitions from pcvt_hdr.h to pcvt_ioctl.h + +- Terminfo and Termcap updated to support 132 columns + +- fixed bug in kcon which outputs garbage for remapped keys in kcon -l. + (reported by Gordon L. Burditt, gordon@sneaky.lonestar.org) + +- modified Makefile for Support/ispcvt to copy it for installation instead + of moving it .. + +- renamed /usr/share/misc/keycap -> /usr/share/misc/keycap.pcvt to + avoid nameclash with same file for codrv (Gordon Burditt) + +- security bit no longer ignored when initializing keyboard (see #define + PCVT_USEKBDSEC in pcvt_hdr.h, suggested by Terry Lambert) + +- cpufunc.h include made only for NetBSD (Gordon Burditt) + +- switch statement in pcvt_drv.c removed for 386BSD (Gordon Burditt) + +- Trident cursor size bug removed + +- keyboard initialization for ddb + +- added support for cursor on/of switching, screensaver and DECTCEM + +- removed explicit Hercules support, MDA = Hercules in this context now + +- patchkit from Joerg Wunsch (kbd-overlay malloc, scroll_sleep, clip fix) + +- ispcvt now installed into /usr/sbin + +- removed PCVT_NETBSD08 and PCVT_NETBSDCU, intro of PCVT_NETBSD + +- implemented 132 column operation for wd90c11 chipsets + +- PCVT_PREPATCH022 renamed to PCVT_NEEDPG + +- INSTALLATION.NetBSD written + +- DEVICE in kcon makefile changed from /dev/console to /dev/ttyc0 + +- new keyboard code in pcvt_kbd.c from NetBSD current + +- new /etc/rc.local script in INSTALLATION + +- implemented 132 column operation for et4000 chipsets + +- detection of super vga chipsets as a prerequisite for 132 col mode + +- switched to memory mapped virtual screen operation, configurable no. of + virtual screens, virtual screens now also on MDA and Hercules boards + + +Changes 2.10 -> 2.20 June 1993 +-------------------------------------------------------------------------------- + +- added new option -a to scon to get the video adaptor in scripts + +- support for NetBSD-current, define PCVT_NETBSDCU to enable it + +- Support for NetBSD 0.8, define PCVT_NETBSD08 in pcvt_hdr.h to enable it. + +- Change Support/Makefile to use <bsd.subdir.mk> instead of <bsd.prog.mk> + +- Font editor for the EGA/VGA font-files added to support the design of new + fonts. One will need Zeyd M. Ben-Halim's ncurses library to compile it, see + file README.FIRST for information where to get it + +- Doc/INSTALLATION upgraded + +- Terminfo entry added to support Zeyd M. Ben-Halim's ncurses port + +- ispcvt is now installed in /sbin to have it at boottime if /usr is not + yet mounted. + +- applied a patch which prevents CAPS LOCK, SHIFT LOCK, and SCROLL LOCK + from being repeated (causing i.e a flashing CAPS LOCK led while + holding CAPS LOCK key down). + (diff from Gordon L. Burditt, gordon@sneaky.lonestar.org) + +- merging patches to support the pccons-model of X11 server support + (diff from Joerg Wunsch, joerg_wunsch@uriah.sax.de) + +- file pcvt_drv.c routine pg() enclosed in "#ifdef PCVT_PREPATCH022" to solve + multiple defined symbols beginning with patchkit 0.2.2 + (reported by Marko Karppinen, dreamer@purkki.apu.fi) + +- added british keycap entry into keycap source file + (from Andy Duplain, duplain@rtf.bt.co.uk) + + +Changes 2.00 -> 2.10 March 1993 +-------------------------------------------------------------------------------- + +- detecting the presence of video boards has been changed to ask the + BIOS "equipment byte" in the RTC-CMOS ram what's installed. this caused + many discussions but solved also many problems .... + +- driver name changed from "pc" to "vt" for multiple driver coexistence + (diff from Joerg Wunsch, joerg_wunsch@uriah.sax.de) + +- new devicenames recommended for showup in utils like "ps" + (many people suggested that ..) + +- new location for manual pcvt.0 + (diff from Joerg Wunsch, joerg_wunsch@uriah.sax.de) + +- new demo file "sgr.vt" to show available graphic renditions + +- intro of Doc/ChangeLog (this file) + +- fixed bug in Support/keycap/Makefile + (diff from Gordon L. Burditt, gordon@sneaky.lonestar.org) + +- make vttest (main.c) compile after applying patchkit-beta2 + +- screensaver fixed by Joerg Wunsch + +- screensaver now compiled in by default + +- made recognition of CONTROL-ALT-DELETE an optional #ifdef'ed feature + +- added sgr-conversion table for MDA adaptors + +- fixed sgr-conversion table for VGA monochrome environments + +- added support for using the kernel debugger + (diff from Bruce Evans, bde@runx.oz.au) + +- fixed several bugs regarding monochrome environments in pcvt_sup.c + +- fixed bug in scon preventing one from piping output though more + (reported by Gordon L. Burditt, gordon@sneaky.lonestar.org) + +- display current screen number in HP-mode in the bottom right of screen + +- changed names of all #define-able compile time options to start with + "PCVT_" for easy identification and installation into the kernel config file + +- applied another pcvt_kbd.c patchkit from Bruce Evans, bde@runx.oz.au. he + writes: + + These fixes are mainly related to ddb. sgetc has a weird interface that + has caused some bugs, and it was too easy for ddb to reenter itself. + + 1. Don't use char for keypad2num, char might be unsigned. Space is not + important since the array is small. + + 2. Don't use u_short for n. + + 3. Change some 0's to NULLs. + + 4. sgetc must not return NULL for the !noblock case. Only callers with + noblock set check for the null pointer. When the kernel follows a + null pointer, I think page 0 is sometimes mapped in so nothing bad + happens. The kernel panics if the page is not mapped in. + + 5. Reentrancy fix. The debugger really ought to check for reentrancy + itself, but the driver still needs to return early after the + debugger returns, so that it doesn't return a junk ESC from + ctrl-alt-ESC. + + 6. xlatkey2ascii may return NULL too. + +-------------------------------------------------------------------------------- |