summaryrefslogtreecommitdiffstats
path: root/usr.sbin/bhyve/pci_uart.c
diff options
context:
space:
mode:
Diffstat (limited to 'usr.sbin/bhyve/pci_uart.c')
-rw-r--r--usr.sbin/bhyve/pci_uart.c626
1 files changed, 626 insertions, 0 deletions
diff --git a/usr.sbin/bhyve/pci_uart.c b/usr.sbin/bhyve/pci_uart.c
new file mode 100644
index 0000000..dd30551
--- /dev/null
+++ b/usr.sbin/bhyve/pci_uart.c
@@ -0,0 +1,626 @@
+/*-
+ * Copyright (c) 2012 NetApp, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/types.h>
+#include <sys/select.h>
+#include <dev/ic/ns16550.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+#include <termios.h>
+#include <unistd.h>
+#include <stdbool.h>
+#include <string.h>
+#include <pthread.h>
+
+#include "bhyverun.h"
+#include "pci_emul.h"
+#include "mevent.h"
+
+#define COM1_BASE 0x3F8
+#define COM1_IRQ 4
+#define COM2_BASE 0x2F8
+#define COM2_IRQ 3
+
+#define DEFAULT_RCLK 1843200
+#define DEFAULT_BAUD 9600
+
+#define FCR_RX_MASK 0xC0
+
+#define MCR_OUT1 0x04
+#define MCR_OUT2 0x08
+
+#define MSR_DELTA_MASK 0x0f
+
+#ifndef REG_SCR
+#define REG_SCR com_scr
+#endif
+
+#define FIFOSZ 16
+
+/*
+ * Pick a PCI vid/did of a chip with a single uart at
+ * BAR0, that most versions of FreeBSD can understand:
+ * Siig CyberSerial 1-port.
+ */
+#define COM_VENDOR 0x131f
+#define COM_DEV 0x2000
+
+static int pci_uart_stdio; /* stdio in use for i/o */
+
+static int pci_uart_nldevs; /* number of legacy devices - 2 max */
+
+static struct {
+ uint64_t baddr;
+ int vector;
+} pci_uart_lres[] = {
+ { COM1_BASE, COM1_IRQ},
+ { COM2_BASE, COM2_IRQ},
+ { 0, 0 }
+};
+
+struct fifo {
+ uint8_t buf[FIFOSZ];
+ int rindex; /* index to read from */
+ int windex; /* index to write to */
+ int num; /* number of characters in the fifo */
+ int size; /* size of the fifo */
+};
+
+struct pci_uart_softc {
+ struct pci_devinst *pi;
+ pthread_mutex_t mtx; /* protects all softc elements */
+ uint8_t data; /* Data register (R/W) */
+ uint8_t ier; /* Interrupt enable register (R/W) */
+ uint8_t lcr; /* Line control register (R/W) */
+ uint8_t mcr; /* Modem control register (R/W) */
+ uint8_t lsr; /* Line status register (R/W) */
+ uint8_t msr; /* Modem status register (R/W) */
+ uint8_t fcr; /* FIFO control register (W) */
+ uint8_t scr; /* Scratch register (R/W) */
+
+ uint8_t dll; /* Baudrate divisor latch LSB */
+ uint8_t dlh; /* Baudrate divisor latch MSB */
+
+ struct fifo rxfifo;
+
+ int opened;
+ int stdio;
+ bool thre_int_pending; /* THRE interrupt pending */
+};
+
+static void pci_uart_drain(int fd, enum ev_type ev, void *arg);
+
+static struct termios tio_orig, tio_new; /* I/O Terminals */
+
+static void
+ttyclose(void)
+{
+ tcsetattr(STDIN_FILENO, TCSANOW, &tio_orig);
+}
+
+static void
+ttyopen(void)
+{
+ tcgetattr(STDIN_FILENO, &tio_orig);
+
+ cfmakeraw(&tio_new);
+ tcsetattr(STDIN_FILENO, TCSANOW, &tio_new);
+
+ atexit(ttyclose);
+}
+
+static bool
+tty_char_available(void)
+{
+ fd_set rfds;
+ struct timeval tv;
+
+ FD_ZERO(&rfds);
+ FD_SET(STDIN_FILENO, &rfds);
+ tv.tv_sec = 0;
+ tv.tv_usec = 0;
+ if (select(STDIN_FILENO + 1, &rfds, NULL, NULL, &tv) > 0 ) {
+ return (true);
+ } else {
+ return (false);
+ }
+}
+
+static int
+ttyread(void)
+{
+ char rb;
+
+ if (tty_char_available()) {
+ read(STDIN_FILENO, &rb, 1);
+ return (rb & 0xff);
+ } else {
+ return (-1);
+ }
+}
+
+static void
+ttywrite(unsigned char wb)
+{
+ (void) write(STDIN_FILENO, &wb, 1);
+}
+
+static void
+fifo_reset(struct fifo *fifo, int size)
+{
+ bzero(fifo, sizeof(struct fifo));
+ fifo->size = size;
+}
+
+static int
+fifo_putchar(struct fifo *fifo, uint8_t ch)
+{
+
+ if (fifo->num < fifo->size) {
+ fifo->buf[fifo->windex] = ch;
+ fifo->windex = (fifo->windex + 1) % fifo->size;
+ fifo->num++;
+ return (0);
+ } else
+ return (-1);
+}
+
+static int
+fifo_getchar(struct fifo *fifo)
+{
+ int c;
+
+ if (fifo->num > 0) {
+ c = fifo->buf[fifo->rindex];
+ fifo->rindex = (fifo->rindex + 1) % fifo->size;
+ fifo->num--;
+ return (c);
+ } else
+ return (-1);
+}
+
+static int
+fifo_numchars(struct fifo *fifo)
+{
+
+ return (fifo->num);
+}
+
+static int
+fifo_available(struct fifo *fifo)
+{
+
+ return (fifo->num < fifo->size);
+}
+
+static void
+pci_uart_opentty(struct pci_uart_softc *sc)
+{
+ struct mevent *mev;
+
+ assert(sc->opened == 0);
+ assert(sc->stdio);
+
+ ttyopen();
+ mev = mevent_add(STDIN_FILENO, EVF_READ, pci_uart_drain, sc);
+ assert(mev);
+}
+
+static void
+pci_uart_legacy_res(uint64_t *bar, int *ivec)
+{
+ if (pci_uart_lres[pci_uart_nldevs].baddr != 0) {
+ *bar = pci_uart_lres[pci_uart_nldevs].baddr;
+ *ivec = pci_uart_lres[pci_uart_nldevs].vector;
+ pci_uart_nldevs++;
+ } else {
+ /* TODO: print warning ? */
+ *bar = 0;
+ *ivec= -1;
+ }
+}
+
+/*
+ * The IIR returns a prioritized interrupt reason:
+ * - receive data available
+ * - transmit holding register empty
+ * - modem status change
+ *
+ * Return an interrupt reason if one is available.
+ */
+static int
+pci_uart_intr_reason(struct pci_uart_softc *sc)
+{
+
+ if ((sc->lsr & LSR_OE) != 0 && (sc->ier & IER_ERLS) != 0)
+ return (IIR_RLS);
+ else if (fifo_numchars(&sc->rxfifo) > 0 && (sc->ier & IER_ERXRDY) != 0)
+ return (IIR_RXTOUT);
+ else if (sc->thre_int_pending && (sc->ier & IER_ETXRDY) != 0)
+ return (IIR_TXRDY);
+ else if ((sc->msr & MSR_DELTA_MASK) != 0 && (sc->ier & IER_EMSC) != 0)
+ return (IIR_MLSC);
+ else
+ return (IIR_NOPEND);
+}
+
+static void
+pci_uart_reset(struct pci_uart_softc *sc)
+{
+ uint16_t divisor;
+
+ divisor = DEFAULT_RCLK / DEFAULT_BAUD / 16;
+ sc->dll = divisor;
+ sc->dlh = divisor >> 16;
+
+ fifo_reset(&sc->rxfifo, 1); /* no fifo until enabled by software */
+}
+
+/*
+ * Toggle the COM port's intr pin depending on whether or not we have an
+ * interrupt condition to report to the processor.
+ */
+static void
+pci_uart_toggle_intr(struct pci_uart_softc *sc)
+{
+ uint8_t intr_reason;
+
+ intr_reason = pci_uart_intr_reason(sc);
+
+ if (intr_reason == IIR_NOPEND)
+ pci_lintr_deassert(sc->pi);
+ else
+ pci_lintr_assert(sc->pi);
+}
+
+static void
+pci_uart_drain(int fd, enum ev_type ev, void *arg)
+{
+ struct pci_uart_softc *sc;
+ int ch;
+
+ sc = arg;
+
+ assert(fd == STDIN_FILENO);
+ assert(ev == EVF_READ);
+
+ /*
+ * This routine is called in the context of the mevent thread
+ * to take out the softc lock to protect against concurrent
+ * access from a vCPU i/o exit
+ */
+ pthread_mutex_lock(&sc->mtx);
+
+ if ((sc->mcr & MCR_LOOPBACK) != 0) {
+ (void) ttyread();
+ } else {
+ while (fifo_available(&sc->rxfifo) &&
+ ((ch = ttyread()) != -1)) {
+ fifo_putchar(&sc->rxfifo, ch);
+ }
+ pci_uart_toggle_intr(sc);
+ }
+
+ pthread_mutex_unlock(&sc->mtx);
+}
+
+static void
+pci_uart_write(struct vmctx *ctx, int vcpu, struct pci_devinst *pi,
+ int baridx, uint64_t offset, int size, uint64_t value)
+{
+ struct pci_uart_softc *sc;
+ int fifosz;
+ uint8_t msr;
+
+ sc = pi->pi_arg;
+
+ assert(baridx == 0);
+ assert(size == 1);
+
+ /* Open terminal */
+ if (!sc->opened && sc->stdio) {
+ pci_uart_opentty(sc);
+ sc->opened = 1;
+ }
+
+ pthread_mutex_lock(&sc->mtx);
+
+ /*
+ * Take care of the special case DLAB accesses first
+ */
+ if ((sc->lcr & LCR_DLAB) != 0) {
+ if (offset == REG_DLL) {
+ sc->dll = value;
+ goto done;
+ }
+
+ if (offset == REG_DLH) {
+ sc->dlh = value;
+ goto done;
+ }
+ }
+
+ switch (offset) {
+ case REG_DATA:
+ if (sc->mcr & MCR_LOOPBACK) {
+ if (fifo_putchar(&sc->rxfifo, value) != 0)
+ sc->lsr |= LSR_OE;
+ } else if (sc->stdio) {
+ ttywrite(value);
+ } /* else drop on floor */
+ sc->thre_int_pending = true;
+ break;
+ case REG_IER:
+ /*
+ * Apply mask so that bits 4-7 are 0
+ * Also enables bits 0-3 only if they're 1
+ */
+ sc->ier = value & 0x0F;
+ break;
+ case REG_FCR:
+ /*
+ * When moving from FIFO and 16450 mode and vice versa,
+ * the FIFO contents are reset.
+ */
+ if ((sc->fcr & FCR_ENABLE) ^ (value & FCR_ENABLE)) {
+ fifosz = (value & FCR_ENABLE) ? FIFOSZ : 1;
+ fifo_reset(&sc->rxfifo, fifosz);
+ }
+
+ /*
+ * The FCR_ENABLE bit must be '1' for the programming
+ * of other FCR bits to be effective.
+ */
+ if ((value & FCR_ENABLE) == 0) {
+ sc->fcr = 0;
+ } else {
+ if ((value & FCR_RCV_RST) != 0)
+ fifo_reset(&sc->rxfifo, FIFOSZ);
+
+ sc->fcr = value &
+ (FCR_ENABLE | FCR_DMA | FCR_RX_MASK);
+ }
+ break;
+ case REG_LCR:
+ sc->lcr = value;
+ break;
+ case REG_MCR:
+ /* Apply mask so that bits 5-7 are 0 */
+ sc->mcr = value & 0x1F;
+
+ msr = 0;
+ if (sc->mcr & MCR_LOOPBACK) {
+ /*
+ * In the loopback mode certain bits from the
+ * MCR are reflected back into MSR
+ */
+ if (sc->mcr & MCR_RTS)
+ msr |= MSR_CTS;
+ if (sc->mcr & MCR_DTR)
+ msr |= MSR_DSR;
+ if (sc->mcr & MCR_OUT1)
+ msr |= MSR_RI;
+ if (sc->mcr & MCR_OUT2)
+ msr |= MSR_DCD;
+ }
+
+ /*
+ * Detect if there has been any change between the
+ * previous and the new value of MSR. If there is
+ * then assert the appropriate MSR delta bit.
+ */
+ if ((msr & MSR_CTS) ^ (sc->msr & MSR_CTS))
+ sc->msr |= MSR_DCTS;
+ if ((msr & MSR_DSR) ^ (sc->msr & MSR_DSR))
+ sc->msr |= MSR_DDSR;
+ if ((msr & MSR_DCD) ^ (sc->msr & MSR_DCD))
+ sc->msr |= MSR_DDCD;
+ if ((sc->msr & MSR_RI) != 0 && (msr & MSR_RI) == 0)
+ sc->msr |= MSR_TERI;
+
+ /*
+ * Update the value of MSR while retaining the delta
+ * bits.
+ */
+ sc->msr &= MSR_DELTA_MASK;
+ sc->msr |= msr;
+ break;
+ case REG_LSR:
+ /*
+ * Line status register is not meant to be written to
+ * during normal operation.
+ */
+ break;
+ case REG_MSR:
+ /*
+ * As far as I can tell MSR is a read-only register.
+ */
+ break;
+ case REG_SCR:
+ sc->scr = value;
+ break;
+ default:
+ break;
+ }
+
+done:
+ pci_uart_toggle_intr(sc);
+ pthread_mutex_unlock(&sc->mtx);
+}
+
+uint64_t
+pci_uart_read(struct vmctx *ctx, int vcpu, struct pci_devinst *pi,
+ int baridx, uint64_t offset, int size)
+{
+ struct pci_uart_softc *sc;
+ uint8_t iir, intr_reason;
+ uint64_t reg;
+
+ sc = pi->pi_arg;
+
+ assert(baridx == 0);
+ assert(size == 1);
+
+ /* Open terminal */
+ if (!sc->opened && sc->stdio) {
+ pci_uart_opentty(sc);
+ sc->opened = 1;
+ }
+
+ pthread_mutex_lock(&sc->mtx);
+
+ /*
+ * Take care of the special case DLAB accesses first
+ */
+ if ((sc->lcr & LCR_DLAB) != 0) {
+ if (offset == REG_DLL) {
+ reg = sc->dll;
+ goto done;
+ }
+
+ if (offset == REG_DLH) {
+ reg = sc->dlh;
+ goto done;
+ }
+ }
+
+ switch (offset) {
+ case REG_DATA:
+ reg = fifo_getchar(&sc->rxfifo);
+ break;
+ case REG_IER:
+ reg = sc->ier;
+ break;
+ case REG_IIR:
+ iir = (sc->fcr & FCR_ENABLE) ? IIR_FIFO_MASK : 0;
+
+ intr_reason = pci_uart_intr_reason(sc);
+
+ /*
+ * Deal with side effects of reading the IIR register
+ */
+ if (intr_reason == IIR_TXRDY)
+ sc->thre_int_pending = false;
+
+ iir |= intr_reason;
+
+ reg = iir;
+ break;
+ case REG_LCR:
+ reg = sc->lcr;
+ break;
+ case REG_MCR:
+ reg = sc->mcr;
+ break;
+ case REG_LSR:
+ /* Transmitter is always ready for more data */
+ sc->lsr |= LSR_TEMT | LSR_THRE;
+
+ /* Check for new receive data */
+ if (fifo_numchars(&sc->rxfifo) > 0)
+ sc->lsr |= LSR_RXRDY;
+ else
+ sc->lsr &= ~LSR_RXRDY;
+
+ reg = sc->lsr;
+
+ /* The LSR_OE bit is cleared on LSR read */
+ sc->lsr &= ~LSR_OE;
+ break;
+ case REG_MSR:
+ /*
+ * MSR delta bits are cleared on read
+ */
+ reg = sc->msr;
+ sc->msr &= ~MSR_DELTA_MASK;
+ break;
+ case REG_SCR:
+ reg = sc->scr;
+ break;
+ default:
+ reg = 0xFF;
+ break;
+ }
+
+done:
+ pci_uart_toggle_intr(sc);
+ pthread_mutex_unlock(&sc->mtx);
+
+ return (reg);
+}
+
+static int
+pci_uart_init(struct vmctx *ctx, struct pci_devinst *pi, char *opts)
+{
+ struct pci_uart_softc *sc;
+ uint64_t bar;
+ int ivec;
+
+ sc = malloc(sizeof(struct pci_uart_softc));
+ memset(sc, 0, sizeof(struct pci_uart_softc));
+
+ pi->pi_arg = sc;
+ sc->pi = pi;
+
+ pthread_mutex_init(&sc->mtx, NULL);
+
+ /* initialize config space */
+ pci_set_cfgdata16(pi, PCIR_DEVICE, COM_DEV);
+ pci_set_cfgdata16(pi, PCIR_VENDOR, COM_VENDOR);
+ pci_set_cfgdata8(pi, PCIR_CLASS, PCIC_SIMPLECOMM);
+ if (pci_is_legacy(pi)) {
+ pci_uart_legacy_res(&bar, &ivec);
+ pci_emul_alloc_pbar(pi, 0, bar, PCIBAR_IO, 8);
+ } else {
+ ivec = -1;
+ pci_emul_alloc_bar(pi, 0, PCIBAR_IO, 8);
+ }
+ pci_lintr_request(pi, ivec);
+
+ if (opts != NULL && !strcmp("stdio", opts) && !pci_uart_stdio) {
+ pci_uart_stdio = 1;
+ sc->stdio = 1;
+ }
+
+ pci_uart_reset(sc);
+
+ return (0);
+}
+
+struct pci_devemu pci_de_com = {
+ .pe_emu = "uart",
+ .pe_init = pci_uart_init,
+ .pe_barwrite = pci_uart_write,
+ .pe_barread = pci_uart_read
+};
+PCI_EMUL_SET(pci_de_com);
OpenPOWER on IntegriCloud