diff options
Diffstat (limited to 'sys/pci/tek390.h')
| -rw-r--r-- | sys/pci/tek390.h | 667 |
1 files changed, 667 insertions, 0 deletions
diff --git a/sys/pci/tek390.h b/sys/pci/tek390.h new file mode 100644 index 0000000..ec52863 --- /dev/null +++ b/sys/pci/tek390.h @@ -0,0 +1,667 @@ +/*********************************************************************** +;* File Name : TEK390.H * +;* TEKRAM DC-390 PCI SCSI Bus Master Host Adapter * +;* Device Driver * +;***********************************************************************/ + +#ifndef TEK390_H +#define TEK390_H + +typedef unsigned char UCHAR; +typedef unsigned short USHORT; +typedef unsigned long ULONG; +typedef unsigned int UINT; + +typedef UCHAR *PUCHAR; +typedef USHORT *PUSHORT; +typedef ULONG *PULONG; +typedef struct scsi_link *PSCLINK, SCSILINK; +typedef struct scsi_xfer *PSCSICMD, SCSICMD; +typedef void *PVOID; + + +/*;-----------------------------------------------------------------------*/ +typedef struct _SyncMsg +{ +UCHAR ExtendMsg; +UCHAR ExtMsgLen; +UCHAR SyncXferReq; +UCHAR Period; +UCHAR ReqOffset; +} SyncMsg; +/*;-----------------------------------------------------------------------*/ +typedef struct _Capacity +{ +ULONG BlockCount; +ULONG BlockLength; +} Capacity; +/*;-----------------------------------------------------------------------*/ +typedef struct _SGentry +{ +ULONG SGXLen; +ULONG SGXPtr; +} SGentry, *PSEG; + +typedef struct _SGentry1 +{ +ULONG SGXPtr1; +ULONG SGXLen1; +} SGentry1, *PSEG1; + + +#define MAX_ADAPTER_NUM 4 +#define MAX_SCSI_ID 8 +#define MAX_SG_ENTRY 33 +#define MAX_DEVICES 10 +#define MAX_CMD_QUEUE 20 +#define MAX_CMD_PER_LUN 6 +#define MAX_SRB_CNT MAX_CMD_PER_LUN*4 +#define PAGELEN 4096 + +/* +;----------------------------------------------------------------------- +; SCSI Request Block +;----------------------------------------------------------------------- +*/ +struct _SRB +{ +UCHAR CmdBlock[12]; + +struct _SRB *pNextSRB; +struct _DCB *pSRBDCB; +PSCSICMD pcmd; +PSEG pSegmentList; + +ULONG PhysSRB; +ULONG TotalXferredLen; +ULONG SGPhysAddr; /*;a segment starting address */ +ULONG SGToBeXferLen; /*; to be xfer length */ +ULONG Segment0[2]; +ULONG Segment1[2]; + +SGentry SGsegment[MAX_SG_ENTRY]; +SGentry Segmentx; /* make a one entry of S/G list table */ + +PUCHAR pMsgPtr; +USHORT SRBState; +USHORT Revxx2; /* ??? */ + +UCHAR MsgInBuf[6]; +UCHAR MsgOutBuf[6]; + +UCHAR AdaptStatus; +UCHAR TargetStatus; +UCHAR MsgCnt; +UCHAR EndMessage; +UCHAR TagNumber; +UCHAR SGcount; +UCHAR SGIndex; +UCHAR IORBFlag; /*;81h-Reset, 2-retry */ + +UCHAR SRBStatus; +UCHAR RetryCnt; +UCHAR SRBFlag; /*; b0-AutoReqSense,b6-Read,b7-write */ + /*; b4-settimeout,b5-Residual valid */ +UCHAR ScsiCmdLen; +UCHAR ScsiPhase; +UCHAR Reserved3[3]; /*;for dword alignment */ +}; + +typedef struct _SRB DC390_SRB, *PSRB; + +/* +;----------------------------------------------------------------------- +; Device Control Block +;----------------------------------------------------------------------- +*/ +struct _DCB +{ +struct _DCB *pNextDCB; +struct _ACB *pDCBACB; + +PSRB pWaitingSRB; +PSRB pWaitLast; +PSRB pGoingSRB; +PSRB pGoingLast; +PSRB pActiveSRB; +USHORT GoingSRBCnt; +USHORT WaitSRBCnt; /* ??? */ + +ULONG TagMask; + +USHORT MaxCommand; +USHORT AdaptIndex; /*; UnitInfo struc start */ +USHORT UnitIndex; /*; nth Unit on this card */ +UCHAR UnitSCSIID; /*; SCSI Target ID (SCSI Only) */ +UCHAR UnitSCSILUN; /*; SCSI Log. Unit (SCSI Only) */ + +UCHAR IdentifyMsg; +UCHAR CtrlR1; +UCHAR CtrlR3; +UCHAR CtrlR4; + +UCHAR InqDataBuf[8]; +UCHAR CapacityBuf[8]; +UCHAR DevMode; +UCHAR AdpMode; +UCHAR SyncMode; /*; 0:async mode */ +UCHAR NegoPeriod; /*;for nego. */ +UCHAR SyncPeriod; /*;for reg. */ +UCHAR SyncOffset; /*;for reg. and nego.(low nibble) */ +UCHAR UnitCtrlFlag; +UCHAR DCBFlag; +UCHAR DevType; +UCHAR Reserved2[3]; /*;for dword alignment */ +}; + +typedef struct _DCB DC390_DCB, *PDCB; +/* +;----------------------------------------------------------------------- +; Adapter Control Block +;----------------------------------------------------------------------- +*/ +struct _ACB +{ +ULONG PhysACB; +struct _ACB *pNextACB; +USHORT IOPortBase; +USHORT Revxx1; /* ??? */ + +PDCB pLinkDCB; +PDCB pDCBRunRobin; +PDCB pActiveDCB; +PDCB pDCB_free; +PSRB pFreeSRB; +PSRB pTmpSRB; +USHORT SRBCount; +USHORT AdapterIndex; /*; nth Adapter this driver */ +USHORT max_id; +USHORT max_lun; +SCSILINK ScsiLink; + +UCHAR msgin123[4]; +UCHAR status; +UCHAR AdaptSCSIID; /*; Adapter SCSI Target ID */ +UCHAR AdaptSCSILUN; /*; Adapter SCSI LUN */ +UCHAR DeviceCnt; +UCHAR IRQLevel; +UCHAR TagMaxNum; +UCHAR ACBFlag; +UCHAR Gmode2; +UCHAR LUNchk; +UCHAR scan_devices; +UCHAR HostID_Bit; +UCHAR Reserved1[1]; /*;for dword alignment */ +UCHAR DCBmap[MAX_SCSI_ID]; +DC390_DCB DCB_array[MAX_DEVICES]; /* +74h, Len=3E8 */ +DC390_SRB SRB_array[MAX_SRB_CNT]; /* +45Ch, Len= */ +DC390_SRB TmpSRB; +}; + +typedef struct _ACB DC390_ACB, *PACB; + +/*;-----------------------------------------------------------------------*/ + + +#define BIT31 0x80000000 +#define BIT30 0x40000000 +#define BIT29 0x20000000 +#define BIT28 0x10000000 +#define BIT27 0x08000000 +#define BIT26 0x04000000 +#define BIT25 0x02000000 +#define BIT24 0x01000000 +#define BIT23 0x00800000 +#define BIT22 0x00400000 +#define BIT21 0x00200000 +#define BIT20 0x00100000 +#define BIT19 0x00080000 +#define BIT18 0x00040000 +#define BIT17 0x00020000 +#define BIT16 0x00010000 +#define BIT15 0x00008000 +#define BIT14 0x00004000 +#define BIT13 0x00002000 +#define BIT12 0x00001000 +#define BIT11 0x00000800 +#define BIT10 0x00000400 +#define BIT9 0x00000200 +#define BIT8 0x00000100 +#define BIT7 0x00000080 +#define BIT6 0x00000040 +#define BIT5 0x00000020 +#define BIT4 0x00000010 +#define BIT3 0x00000008 +#define BIT2 0x00000004 +#define BIT1 0x00000002 +#define BIT0 0x00000001 + +/*;---UnitCtrlFlag */ +#define UNIT_ALLOCATED BIT0 +#define UNIT_INFO_CHANGED BIT1 +#define FORMATING_MEDIA BIT2 +#define UNIT_RETRY BIT3 + +/*;---UnitFlags */ +#define DASD_SUPPORT BIT0 +#define SCSI_SUPPORT BIT1 +#define ASPI_SUPPORT BIT2 + +/*;----SRBState machine definition */ +#define SRB_FREE 0 +#define SRB_WAIT BIT0 +#define SRB_READY BIT1 +#define SRB_MSGOUT BIT2 /*;arbitration+msg_out 1st byte*/ +#define SRB_MSGIN BIT3 +#define SRB_MSGIN_MULTI BIT4 +#define SRB_COMMAND BIT5 +#define SRB_START_ BIT6 /*;arbitration+msg_out+command_out*/ +#define SRB_DISCONNECT BIT7 +#define SRB_DATA_XFER BIT8 +#define SRB_XFERPAD BIT9 +#define SRB_STATUS BIT10 +#define SRB_COMPLETED BIT11 +#define SRB_ABORT_SENT BIT12 +#define DO_SYNC_NEGO BIT13 +#define SRB_UNEXPECT_RESEL BIT14 + +/*;---ACBFlag */ +#define RESET_DEV BIT0 +#define RESET_DETECT BIT1 +#define RESET_DONE BIT2 + +/*;---DCBFlag */ +#define ABORT_DEV_ BIT0 + +/*;---SRBstatus */ +#define SRB_OK BIT0 +#define ABORTION BIT1 +#define OVER_RUN BIT2 +#define UNDER_RUN BIT3 +#define PARITY_ERROR BIT4 +#define SRB_ERROR BIT5 + +/*;---SRBFlag */ +#define DATAOUT BIT7 +#define DATAIN BIT6 +#define RESIDUAL_VALID BIT5 +#define ENABLE_TIMER BIT4 +#define RESET_DEV0 BIT2 +#define ABORT_DEV BIT1 +#define AUTO_REQSENSE BIT0 + +/*;---Adapter status */ +#define H_STATUS_GOOD 0 +#define H_SEL_TIMEOUT 0x11 +#define H_OVER_UNDER_RUN 0x12 +#define H_UNEXP_BUS_FREE 0x13 +#define H_TARGET_PHASE_F 0x14 +#define H_INVALID_CCB_OP 0x16 +#define H_LINK_CCB_BAD 0x17 +#define H_BAD_TARGET_DIR 0x18 +#define H_DUPLICATE_CCB 0x19 +#define H_BAD_CCB_OR_SG 0x1A +#define H_ABORT 0x0FF + +/*; SCSI Status byte codes*/ +#define SCSI_STAT_GOOD 0x0 /*; Good status */ +#define SCSI_STAT_CHECKCOND 0x02 /*; SCSI Check Condition */ +#define SCSI_STAT_CONDMET 0x04 /*; Condition Met */ +#define SCSI_STAT_BUSY 0x08 /*; Target busy status */ +#define SCSI_STAT_INTER 0x10 /*; Intermediate status */ +#define SCSI_STAT_INTERCONDMET 0x14 /*; Intermediate condition met */ +#define SCSI_STAT_RESCONFLICT 0x18 /*; Reservation conflict */ +#define SCSI_STAT_CMDTERM 0x22 /*; Command Terminated */ +#define SCSI_STAT_QUEUEFULL 0x28 /*; Queue Full */ + +#define SCSI_STAT_UNEXP_BUS_F 0xFD /*; Unexpect Bus Free */ +#define SCSI_STAT_BUS_RST_DETECT 0xFE /*; Scsi Bus Reset detected */ +#define SCSI_STAT_SEL_TIMEOUT 0xFF /*; Selection Time out */ + +/*;---Sync_Mode */ +#define SYNC_DISABLE 0 +#define SYNC_ENABLE BIT0 +#define SYNC_NEGO_DONE BIT1 +#define WIDE_ENABLE BIT2 +#define WIDE_NEGO_DONE BIT3 +#define EN_TAG_QUEUING BIT4 +#define EN_ATN_STOP BIT5 + +#define SYNC_NEGO_OFFSET 15 + +/*;---SCSI bus phase*/ +#define SCSI_DATA_OUT_ 0 +#define SCSI_DATA_IN_ 1 +#define SCSI_COMMAND 2 +#define SCSI_STATUS_ 3 +#define SCSI_NOP0 4 +#define SCSI_NOP1 5 +#define SCSI_MSG_OUT 6 +#define SCSI_MSG_IN 7 + +/*;----SCSI MSG BYTE*/ +#define MSG_COMPLETE 0x00 +#define MSG_EXTENDED 0x01 +#define MSG_SAVE_PTR 0x02 +#define MSG_RESTORE_PTR 0x03 +#define MSG_DISCONNECT 0x04 +#define MSG_INITIATOR_ERROR 0x05 +#define MSG_ABORT 0x06 +#define MSG_REJECT_ 0x07 +#define MSG_NOP 0x08 +#define MSG_PARITY_ERROR 0x09 +#define MSG_LINK_CMD_COMPL 0x0A +#define MSG_LINK_CMD_COMPL_FLG 0x0B +#define MSG_BUS_RESET 0x0C +#define MSG_ABORT_TAG 0x0D +#define MSG_SIMPLE_QTAG 0x20 +#define MSG_HEAD_QTAG 0x21 +#define MSG_ORDER_QTAG 0x22 +#define MSG_IDENTIFY 0x80 +#define MSG_HOST_ID 0x0C0 + +/*;----SCSI STATUS BYTE*/ +#define STATUS_GOOD 0x00 +#define CHECK_CONDITION_ 0x02 +#define STATUS_BUSY 0x08 +#define STATUS_INTERMEDIATE 0x10 +#define RESERVE_CONFLICT 0x18 + +/* cmd->result */ +#define STATUS_MASK_ 0xFF +#define MSG_MASK 0xFF00 +#define RETURN_MASK 0xFF0000 + +/* +** Inquiry Data format +*/ + +typedef struct _SCSIInqData { /* INQ */ + + UCHAR DevType; /* Periph Qualifier & Periph Dev Type*/ + UCHAR RMB_TypeMod; /* rem media bit & Dev Type Modifier */ + UCHAR Vers; /* ISO, ECMA, & ANSI versions */ + UCHAR RDF; /* AEN, TRMIOP, & response data format*/ + UCHAR AddLen; /* length of additional data */ + UCHAR Res1; /* reserved */ + UCHAR Res2; /* reserved */ + UCHAR Flags; /* RelADr,Wbus32,Wbus16,Sync,etc. */ + UCHAR VendorID[8]; /* Vendor Identification */ + UCHAR ProductID[16]; /* Product Identification */ + UCHAR ProductRev[4]; /* Product Revision */ + + +} SCSI_INQDATA, *PSCSI_INQDATA; + + +/* Inquiry byte 0 masks */ + + +#define SCSI_DEVTYPE 0x1F /* Peripheral Device Type */ +#define SCSI_PERIPHQUAL 0xE0 /* Peripheral Qualifier */ + + +/* Inquiry byte 1 mask */ + +#define SCSI_REMOVABLE_MEDIA 0x80 /* Removable Media bit (1=removable) */ + + +/* Peripheral Device Type definitions */ + +#define SCSI_DASD 0x00 /* Direct-access Device */ +#define SCSI_SEQACESS 0x01 /* Sequential-access device */ +#define SCSI_PRINTER 0x02 /* Printer device */ +#define SCSI_PROCESSOR 0x03 /* Processor device */ +#define SCSI_WRITEONCE 0x04 /* Write-once device */ +#define SCSI_CDROM 0x05 /* CD-ROM device */ +#define SCSI_SCANNER 0x06 /* Scanner device */ +#define SCSI_OPTICAL 0x07 /* Optical memory device */ +#define SCSI_MEDCHGR 0x08 /* Medium changer device */ +#define SCSI_COMM 0x09 /* Communications device */ +#define SCSI_NODEV 0x1F /* Unknown or no device type */ + +/* +** Inquiry flag definitions (Inq data byte 7) +*/ + +#define SCSI_INQ_RELADR 0x80 /* device supports relative addressing*/ +#define SCSI_INQ_WBUS32 0x40 /* device supports 32 bit data xfers */ +#define SCSI_INQ_WBUS16 0x20 /* device supports 16 bit data xfers */ +#define SCSI_INQ_SYNC 0x10 /* device supports synchronous xfer */ +#define SCSI_INQ_LINKED 0x08 /* device supports linked commands */ +#define SCSI_INQ_CMDQUEUE 0x02 /* device supports command queueing */ +#define SCSI_INQ_SFTRE 0x01 /* device supports soft resets */ + + +/* +;========================================================== +; EEPROM byte offset +;========================================================== +*/ +typedef struct _EEprom +{ +UCHAR EE_MODE1; +UCHAR EE_SPEED; +UCHAR xx1; +UCHAR xx2; +} EEprom, *PEEprom; + +#define EE_ADAPT_SCSI_ID 64 +#define EE_MODE2 65 +#define EE_DELAY 66 +#define EE_TAG_CMD_NUM 67 + +/*; EE_MODE1 bits definition*/ +#define PARITY_CHK_ BIT0 +#define SYNC_NEGO_ BIT1 +#define EN_DISCONNECT_ BIT2 +#define SEND_START_ BIT3 +#define TAG_QUEUING_ BIT4 + +/*; EE_MODE2 bits definition*/ +#define MORE2_DRV BIT0 +#define GREATER_1G BIT1 +#define RST_SCSI_BUS BIT2 +#define ACTIVE_NEGATION BIT3 +#define NO_SEEK BIT4 +#define LUN_CHECK BIT5 + +#define ENABLE_CE 1 +#define DISABLE_CE 0 +#define EEPROM_READ 0x80 + +/* +;========================================================== +; AMD 53C974 Registers bit Definition +;========================================================== +*/ +/* +;==================== +; SCSI Register +;==================== +*/ + +/*; Command Reg.(+0CH) */ +#define DMA_COMMAND BIT7 +#define NOP_CMD 0 +#define CLEAR_FIFO_CMD 1 +#define RST_DEVICE_CMD 2 +#define RST_SCSI_BUS_CMD 3 +#define INFO_XFER_CMD 0x10 +#define INITIATOR_CMD_CMPLTE 0x11 +#define MSG_ACCEPTED_CMD 0x12 +#define XFER_PAD_BYTE 0x18 +#define SET_ATN_CMD 0x1A +#define RESET_ATN_CMD 0x1B +#define SELECT_W_ATN 0x42 +#define SEL_W_ATN_STOP 0x43 +#define EN_SEL_RESEL 0x44 +#define SEL_W_ATN2 0x46 +#define DATA_XFER_CMD INFO_XFER_CMD + + +/*; SCSI Status Reg.(+10H) */ +#define INTERRUPT BIT7 +#define ILLEGAL_OP_ERR BIT6 +#define PARITY_ERR BIT5 +#define COUNT_2_ZERO BIT4 +#define GROUP_CODE_VALID BIT3 +#define SCSI_PHASE_MASK (BIT2+BIT1+BIT0) + +/*; Interrupt Status Reg.(+14H) */ +#define SCSI_RESET_ BIT7 +#define INVALID_CMD BIT6 +#define DISCONNECTED BIT5 +#define SERVICE_REQUEST BIT4 +#define SUCCESSFUL_OP BIT3 +#define RESELECTED BIT2 +#define SEL_ATTENTION BIT1 +#define SELECTED BIT0 + +/*; Internal State Reg.(+18H) */ +#define SYNC_OFFSET_FLAG BIT3 +#define INTRN_STATE_MASK (BIT2+BIT1+BIT0) + +/*; Clock Factor Reg.(+24H) */ +#define CLK_FREQ_40MHZ 0 +#define CLK_FREQ_35MHZ (BIT2+BIT1+BIT0) +#define CLK_FREQ_30MHZ (BIT2+BIT1) +#define CLK_FREQ_25MHZ (BIT2+BIT0) +#define CLK_FREQ_20MHZ BIT2 +#define CLK_FREQ_15MHZ (BIT1+BIT0) +#define CLK_FREQ_10MHZ BIT1 + +/*; Control Reg. 1(+20H) */ +#define EXTENDED_TIMING BIT7 +#define DIS_INT_ON_SCSI_RST BIT6 +#define PARITY_ERR_REPO BIT4 +#define SCSI_ID_ON_BUS (BIT2+BIT1+BIT0) + +/*; Control Reg. 2(+2CH) */ +#define EN_FEATURE BIT6 +#define EN_SCSI2_CMD BIT3 + +/*; Control Reg. 3(+30H) */ +#define ID_MSG_CHECK BIT7 +#define EN_QTAG_MSG BIT6 +#define EN_GRP2_CMD BIT5 +#define FAST_SCSI BIT4 /* ;10MB/SEC */ +#define FAST_CLK BIT3 /* ;25 - 40 MHZ */ + +/*; Control Reg. 4(+34H) */ +#define EATER_12NS 0 +#define EATER_25NS BIT7 +#define EATER_35NS BIT6 +#define EATER_0NS (BIT7+BIT6) +#define NEGATE_REQACKDATA BIT2 +#define NEGATE_REQACK BIT3 +/* +;==================== +; DMA Register +;==================== +*/ +/*; DMA Command Reg.(+40H) */ +#define READ_DIRECTION BIT7 +#define WRITE_DIRECTION 0 +#define EN_DMA_INT BIT6 +#define MAP_TO_MDL BIT5 +#define DIAGNOSTIC BIT4 +#define DMA_IDLE_CMD 0 +#define DMA_BLAST_CMD BIT0 +#define DMA_ABORT_CMD BIT1 +#define DMA_START_CMD (BIT1+BIT0) + +/*; DMA Status Reg.(+54H) */ +#define PCI_MS_ABORT BIT6 +#define BLAST_COMPLETE BIT5 +#define SCSI_INTERRUPT BIT4 +#define DMA_XFER_DONE BIT3 +#define DMA_XFER_ABORT BIT2 +#define DMA_XFER_ERROR BIT1 +#define POWER_DOWN BIT0 + +/* +; DMA SCSI Bus and Ctrl.(+70H) +;EN_INT_ON_PCI_ABORT +*/ + +/* +;========================================================== +; SCSI Chip register address offset +;========================================================== +*/ +#define CtcReg_Low 0x00 +#define CtcReg_Mid 0x04 +#define ScsiFifo 0x08 +#define ScsiCmd 0x0C +#define Scsi_Status 0x10 +#define INT_Status 0x14 +#define Sync_Period 0x18 +#define Sync_Offset 0x1C +#define CtrlReg1 0x20 +#define Clk_Factor 0x24 +#define CtrlReg2 0x2C +#define CtrlReg3 0x30 +#define CtrlReg4 0x34 +#define CtcReg_High 0x38 +#define DMA_Cmd 0x40 +#define DMA_XferCnt 0x44 +#define DMA_XferAddr 0x48 +#define DMA_Wk_ByteCntr 0x4C +#define DMA_Wk_AddrCntr 0x50 +#define DMA_Status 0x54 +#define DMA_MDL_Addr 0x58 +#define DMA_Wk_MDL_Cntr 0x5C +#define DMA_ScsiBusCtrl 0x70 + +#define StcReg_Low CtcReg_Low +#define StcReg_Mid CtcReg_Mid +#define Scsi_Dest_ID Scsi_Status +#define Scsi_TimeOut INT_Status +#define Intern_State Sync_Period +#define Current_Fifo Sync_Offset +#define StcReg_High CtcReg_High + +#define am_target Scsi_Status +#define am_timeout INT_Status +#define am_seq_step Sync_Period +#define am_fifo_count Sync_Offset + + +#define DC390_read8(address) \ + inb(DC390_ioport + (address))) + +#define DC390_read16(address) \ + inw(DC390_ioport + (address))) + +#define DC390_read32(address) \ + inl(DC390_ioport + (address))) + +#define DC390_write8(address,value) \ + outb((value), DC390_ioport + (address))) + +#define DC390_write16(address,value) \ + outw((value), DC390_ioport + (address))) + +#define DC390_write32(address,value) \ + outl((value), DC390_ioport + (address))) + + +/* Configuration method #1 */ +#define PCI_CFG1_ADDRESS_REG 0xcf8 +#define PCI_CFG1_DATA_REG 0xcfc +#define PCI_CFG1_ENABLE 0x80000000 +#define PCI_CFG1_TUPPLE(bus, device, function, register) \ + (PCI_CFG1_ENABLE | (((bus) << 16) & 0xff0000) | \ + (((device) << 11) & 0xf800) | (((function) << 8) & 0x700)| \ + (((register) << 2) & 0xfc)) + +/* Configuration method #2 */ +#define PCI_CFG2_ENABLE_REG 0xcf8 +#define PCI_CFG2_FORWARD_REG 0xcfa +#define PCI_CFG2_ENABLE 0x0f0 +#define PCI_CFG2_TUPPLE(function) \ + (PCI_CFG2_ENABLE | (((function) << 1) & 0xe)) + + +#endif /* TEK390_H */ |
