diff options
Diffstat (limited to 'sys/net/zlib.h')
-rw-r--r-- | sys/net/zlib.h | 643 |
1 files changed, 643 insertions, 0 deletions
diff --git a/sys/net/zlib.h b/sys/net/zlib.h new file mode 100644 index 0000000..864698a --- /dev/null +++ b/sys/net/zlib.h @@ -0,0 +1,643 @@ +/* $Id: zlib.h,v 1.6 1997/05/22 06:44:40 paulus Exp $ */ + +/* + * This file is derived from zlib.h and zconf.h from the zlib-0.95 + * distribution by Jean-loup Gailly and Mark Adler, with some additions + * by Paul Mackerras to aid in implementing Deflate compression and + * decompression for PPP packets. + */ + +/* + * ==FILEVERSION 970501== + * + * This marker is used by the Linux installation script to determine + * whether an up-to-date version of this file is already installed. + */ + +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 0.95, Aug 16th, 1995. + + Copyright (C) 1995 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + gzip@prep.ai.mit.edu madler@alumni.caltech.edu + */ + +#ifndef _ZLIB_H +#define _ZLIB_H + +/* #include "zconf.h" */ /* included directly here */ + +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */ + +/* + The library does not install any signal handler. It is recommended to + add at least a handler for SIGSEGV when decompressing; the library checks + the consistency of the input data whenever possible but may go nuts + for some forms of corrupted input. + */ + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints + * at addresses which are not a multiple of their size. + * Under DOS, -DFAR=far or -DFAR=__far may be needed. + */ + +#ifndef STDC +# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus) +# define STDC +# endif +#endif + +#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */ +# include <unix.h> +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +#ifndef FAR +# define FAR +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2 */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + 1 << (windowBits+2) + 1 << (memLevel+9) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +typedef unsigned char Byte; /* 8 bits */ +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +typedef Byte FAR Bytef; +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +/* end of original zconf.h */ + +#define ZLIB_VERSION "0.95P" + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms may be added later and will have the same + stream interface. + + For compression the application must provide the output buffer and + may optionally provide the input buffer for optimization. For decompression, + the application must provide the input buffer and may optionally provide + the output buffer for optimization. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes)); + +struct internal_state; + +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + alloc_func zalloc_init; /* used to allocate the internal state during initialization */ + free_func zfree; /* used to free the internal state */ + voidp opaque; /* private data object passed to zalloc and zfree */ + + Byte data_type; /* best guess about the data type: ascii or binary */ + +} z_stream; + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 +#define Z_FULL_FLUSH 2 +#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */ +#define Z_FINISH 4 +#define Z_PACKET_FLUSH 5 +/* See deflate() below for the usage of these constants */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +/* error codes for the compression/decompression functions */ + +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_DEFAULT_STRATEGY 0 + +#define Z_BINARY 0 +#define Z_ASCII 1 +#define Z_UNKNOWN 2 +/* Used to set the data_type field */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +extern char *zlib_version; +/* The application can compare zlib_version and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + */ + + /* basic functions */ + +extern int deflateInit OF((z_stream *strm, int level)); +/* + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. + If zalloc and zfree are set to Z_NULL, deflateInit updates them to + use default allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 1 and 9: + 1 gives best speed, 9 gives best compression. Z_DEFAULT_COMPRESSION requests + a default compromise between speed and compression (currently equivalent + to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if level is not a valid compression level. + msg is set to null if there is no error message. deflateInit does not + perform any compression: this will be done by deflate(). +*/ + + +extern int deflate OF((z_stream *strm, int flush)); +/* + Performs one or both of the following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). + Some output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating avail_in or avail_out accordingly; avail_out + should never be zero before the call. The application can consume the + compressed output when it wants, for example when the output buffer is full + (avail_out == 0), or after each call of deflate(). + + If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression + block is terminated and flushed to the output buffer so that the + decompressor can get all input data available so far. For method 9, a future + variant on method 8, the current block will be flushed but not terminated. + If flush is set to Z_FULL_FLUSH, the compression block is terminated, a + special marker is output and the compression dictionary is discarded; this + is useful to allow the decompressor to synchronize if one compressed block + has been damaged (see inflateSync below). Flushing degrades compression and + so should be used only when necessary. Using Z_FULL_FLUSH too often can + seriously degrade the compression. If deflate returns with avail_out == 0, + this function must be called again with the same value of the flush + parameter and more output space (updated avail_out), until the flush is + complete (deflate returns with non-zero avail_out). + + If the parameter flush is set to Z_PACKET_FLUSH, the compression + block is terminated, and a zero-length stored block is output, + omitting the length bytes (the effect of this is that the 3-bit type + code 000 for a stored block is output, and the output is then + byte-aligned). This is designed for use at the end of a PPP packet. + In addition, if the current compression block contains all the data + since the last Z_PACKET_FLUSH, it is never output as a stored block. + If the current compression block output as a static or dynamic block + would not be at least `minCompression' bytes smaller than the + original data, then nothing is output for that block. (The type + code for the zero-length stored block is still output, resulting in + a single zero byte being output for the whole packet.) + `MinCompression' is a parameter to deflateInit2, or 0 if deflateInit + is used. + + If the parameter flush is set to Z_FINISH, all pending input is processed, + all pending output is flushed and deflate returns with Z_STREAM_END if there + was enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the + stream are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least + 0.1% larger than avail_in plus 12 bytes. If deflate does not return + Z_STREAM_END, then it must be called again as described above. + + deflate() may update data_type if it can make a good guess about + the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered + binary. This field is only for information purposes and does not affect + the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible. +*/ + + +extern int deflateEnd OF((z_stream *strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent. In the error case, msg may be set + but then points to a static string (which must not be deallocated). +*/ + + +extern int inflateInit OF((z_stream *strm)); +/* + Initializes the internal stream state for decompression. The fields + zalloc and zfree must be initialized before by the caller. If zalloc and + zfree are set to Z_NULL, inflateInit updates them to use default allocation + functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory. msg is set to null if there is no error message. + inflateInit does not perform any decompression: this will be done by + inflate(). +*/ + + +#if defined(__FreeBSD__) && (defined(KERNEL) || defined(_KERNEL)) +#define inflate inflate_ppp /* FreeBSD already has an inflate :-( */ +#endif + +extern int inflate OF((z_stream *strm, int flush)); +/* + Performs one or both of the following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() always provides as much output as possible + (until there is no more input data or no more space in the output buffer). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). + + If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH, + inflate flushes as much output as possible to the output buffer. The + flushing behavior of inflate is not specified for values of the flush + parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the + current implementation actually flushes as much output as possible + anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data + has been consumed, it is expecting to see the length field of a stored + block; if not, it returns Z_DATA_ERROR. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster routine + may be used for the single inflate() call. + + inflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if the end of the + compressed data has been reached and all uncompressed output has been + produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if + the stream structure was inconsistent (for example if next_in or next_out + was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no + progress is possible or if there was not enough room in the output buffer + when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then + call inflateSync to look for a good compression block. */ + + +extern int inflateEnd OF((z_stream *strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +extern int deflateInit2 OF((z_stream *strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy, + int minCompression)); +/* + This is another version of deflateInit with more compression options. The + fields next_in, zalloc and zfree must be initialized before by the caller. + + The method parameter is the compression method. It must be 8 in this + version of the library. (Method 9 will allow a 64K history buffer and + partial block flushes.) + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library (the value 16 will be allowed for method 9). Larger + values of this parameter result in better compression at the expense of + memory usage. The default value is 15 if deflateInit is used instead. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but + is slow and reduces compression ratio; memLevel=9 uses maximum memory + for optimal speed. The default value is 8. See zconf.h for total memory + usage as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use + the value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data + produced by a filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman + encoding only (no string match). Filtered data consists mostly of small + values with a somewhat random distribution. In this case, the + compression algorithm is tuned to compress them better. The strategy + parameter only affects the compression ratio but not the correctness of + the compressed output even if it is not set appropriately. + + The minCompression parameter specifies the minimum reduction in size + required for a compressed block to be output when Z_PACKET_FLUSH is + used (see the description of deflate above). + + If next_in is not null, the library will use this buffer to hold also + some history information; the buffer must either hold the entire input + data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in + is null, the library will allocate its own history buffer (and leave next_in + null). next_out need not be provided here but must be provided by the + application for the next call of deflate(). + + If the history buffer is provided by the application, next_in must + must never be changed by the application since the compressor maintains + information inside this buffer from call to call; the application + must provide more input only by increasing avail_in. next_in is always + reset by the library in this case. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was + not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as + an invalid method). msg is set to null if there is no error message. + deflateInit2 does not perform any compression: this will be done by + deflate(). +*/ + +extern int deflateCopy OF((z_stream *dest, + z_stream *source)); +/* + Sets the destination stream as a complete copy of the source stream. If + the source stream is using an application-supplied history buffer, a new + buffer is allocated for the destination stream. The compressed output + buffer is always application-supplied. It's the responsibility of the + application to provide the correct values of next_out and avail_out for the + next call of deflate. + + This function is useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and + can consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +extern int deflateReset OF((z_stream *strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. + The stream will keep the same compression level and any other attributes + that may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +extern int inflateInit2 OF((z_stream *strm, + int windowBits)); +/* + This is another version of inflateInit with more compression options. The + fields next_out, zalloc and zfree must be initialized before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library (the value 16 will be allowed soon). The + default value is 15 if inflateInit is used instead. If a compressed stream + with a larger window size is given as input, inflate() will return with + the error code Z_DATA_ERROR instead of trying to allocate a larger window. + + If next_out is not null, the library will use this buffer for the history + buffer; the buffer must either be large enough to hold the entire output + data, or have at least 1<<windowBits bytes. If next_out is null, the + library will allocate its own buffer (and leave next_out null). next_in + need not be provided here but must be provided by the application for the + next call of inflate(). + + If the history buffer is provided by the application, next_out must + never be changed by the application since the decompressor maintains + history information inside this buffer from call to call; the application + can only reset next_out to the beginning of the history buffer when + avail_out is zero and all output has been consumed. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was + not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as + windowBits < 8). msg is set to null if there is no error message. + inflateInit2 does not perform any decompression: this will be done by + inflate(). +*/ + +extern int inflateSync OF((z_stream *strm)); +/* + Skips invalid compressed data until the special marker (see deflate() + above) can be found, or until all available input is skipped. No output + is provided. + + inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no marker has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data. +*/ + +extern int inflateReset OF((z_stream *strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +extern int inflateIncomp OF((z_stream *strm)); +/* + This function adds the data at next_in (avail_in bytes) to the output + history without performing any output. There must be no pending output, + and the decompressor must be expecting to see the start of a block. + Calling this function is equivalent to decompressing a stored block + containing the data at next_in (except that the data is not output). +*/ + + /* checksum functions */ + +/* + This function is not related to compression but is exported + anyway because it might be useful in applications using the + compression library. +*/ + +extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len)); + +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is NULL, this function returns + the required initial value for the checksum. + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +#ifndef _Z_UTIL_H + struct internal_state {int dummy;}; /* hack for buggy compilers */ +#endif + +#endif /* _ZLIB_H */ |