diff options
Diffstat (limited to 'sys/mips/rt305x/uart_dev_rt305x.c')
-rw-r--r-- | sys/mips/rt305x/uart_dev_rt305x.c | 507 |
1 files changed, 507 insertions, 0 deletions
diff --git a/sys/mips/rt305x/uart_dev_rt305x.c b/sys/mips/rt305x/uart_dev_rt305x.c new file mode 100644 index 0000000..677c0c6 --- /dev/null +++ b/sys/mips/rt305x/uart_dev_rt305x.c @@ -0,0 +1,507 @@ +/* $NetBSD: uart.c,v 1.2 2007/03/23 20:05:47 dogcow Exp $ */ + +/*- + * Copyright (c) 2010 Aleksandr Rybalko. + * Copyright (c) 2007 Ruslan Ermilov and Vsevolod Lobko. + * Copyright (c) 2007 Oleksandr Tymoshenko. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +#include "opt_ddb.h" + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/bus.h> +#include <sys/conf.h> +#include <sys/kdb.h> +#include <sys/reboot.h> +#include <sys/sysctl.h> +#include <sys/kernel.h> +#include <machine/bus.h> + +#include <dev/uart/uart.h> +#include <dev/uart/uart_cpu.h> +#include <dev/uart/uart_bus.h> + +#include <mips/rt305x/uart_dev_rt305x.h> +#include <mips/rt305x/rt305xreg.h> + +#include "uart_if.h" +/* + * Low-level UART interface. + */ +static int rt305x_uart_probe(struct uart_bas *bas); +static void rt305x_uart_init(struct uart_bas *bas, int, int, int, int); +static void rt305x_uart_term(struct uart_bas *bas); +static void rt305x_uart_putc(struct uart_bas *bas, int); +static int rt305x_uart_rxready(struct uart_bas *bas); +static int rt305x_uart_getc(struct uart_bas *bas, struct mtx *); + +static struct uart_ops uart_rt305x_uart_ops = { + .probe = rt305x_uart_probe, + .init = rt305x_uart_init, + .term = rt305x_uart_term, + .putc = rt305x_uart_putc, + .rxready = rt305x_uart_rxready, + .getc = rt305x_uart_getc, +}; + +static int uart_output = 1; +TUNABLE_INT("kern.uart_output", &uart_output); +SYSCTL_INT(_kern, OID_AUTO, uart_output, CTLFLAG_RW, + &uart_output, 0, "UART output enabled."); + + + + +static int +rt305x_uart_probe(struct uart_bas *bas) +{ + + return (0); +} + +static void +rt305x_uart_init(struct uart_bas *bas, int baudrate, int databits, + int stopbits, int parity) +{ +#ifdef notyet + /* CLKDIV = 384000000/ 3/ 16/ br */ + /* for 384MHz CLKDIV = 8000000 / baudrate; */ + switch (databits) { + case 5: + databits = UART_LCR_5B; + break; + case 6: + databits = UART_LCR_6B; + break; + case 7: + databits = UART_LCR_7B; + break; + case 8: + databits = UART_LCR_8B; + break; + default: + /* Unsupported */ + return; + } + switch (parity) { + case UART_PARITY_EVEN: parity = (UART_LCR_PEN|UART_LCR_EVEN); break; + case UART_PARITY_NONE: parity = (UART_LCR_PEN); break; + case UART_PARITY_ODD: parity = 0; break; + /* Unsupported */ + default: return; + } + uart_setreg(bas, UART_CDDL_REG, 8000000/baudrate); + uart_barrier(bas); + uart_setreg(bas, UART_LCR_REG, databits | (stopbits==1?0:4) | parity); + uart_barrier(bas); +#endif +} + +static void +rt305x_uart_term(struct uart_bas *bas) +{ + uart_setreg(bas, UART_MCR_REG, 0); + uart_barrier(bas); +} + +static void +rt305x_uart_putc(struct uart_bas *bas, int c) +{ + char chr; + if (!uart_output) return; + chr = c; + while (!(uart_getreg(bas, UART_LSR_REG) & UART_LSR_THRE)); + uart_setreg(bas, UART_TX_REG, c); + uart_barrier(bas); + while (!(uart_getreg(bas, UART_LSR_REG) & UART_LSR_THRE)); +} + +static int +rt305x_uart_rxready(struct uart_bas *bas) +{ +#ifdef notyet + if (uart_getreg(bas, UART_LSR_REG) & UART_LSR_DR) + return (1); + + return (0); +#else + return (1); +#endif +} + +static int +rt305x_uart_getc(struct uart_bas *bas, struct mtx *hwmtx) +{ + int c; + + uart_lock(hwmtx); + + while (!(uart_getreg(bas, UART_LSR_REG) & UART_LSR_DR)) { + uart_unlock(hwmtx); + DELAY(10); + uart_lock(hwmtx); + } + + c = uart_getreg(bas, UART_RX_REG); + + uart_unlock(hwmtx); + + return (c); +} + +/* + * High-level UART interface. + */ +struct rt305x_uart_softc { + struct uart_softc base; +}; + +static int rt305x_uart_bus_attach(struct uart_softc *); +static int rt305x_uart_bus_detach(struct uart_softc *); +static int rt305x_uart_bus_flush(struct uart_softc *, int); +static int rt305x_uart_bus_getsig(struct uart_softc *); +static int rt305x_uart_bus_ioctl(struct uart_softc *, int, intptr_t); +static int rt305x_uart_bus_ipend(struct uart_softc *); +static int rt305x_uart_bus_param(struct uart_softc *, int, int, int, int); +static int rt305x_uart_bus_probe(struct uart_softc *); +static int rt305x_uart_bus_receive(struct uart_softc *); +static int rt305x_uart_bus_setsig(struct uart_softc *, int); +static int rt305x_uart_bus_transmit(struct uart_softc *); + +static kobj_method_t rt305x_uart_methods[] = { + KOBJMETHOD(uart_attach, rt305x_uart_bus_attach), + KOBJMETHOD(uart_detach, rt305x_uart_bus_detach), + KOBJMETHOD(uart_flush, rt305x_uart_bus_flush), + KOBJMETHOD(uart_getsig, rt305x_uart_bus_getsig), + KOBJMETHOD(uart_ioctl, rt305x_uart_bus_ioctl), + KOBJMETHOD(uart_ipend, rt305x_uart_bus_ipend), + KOBJMETHOD(uart_param, rt305x_uart_bus_param), + KOBJMETHOD(uart_probe, rt305x_uart_bus_probe), + KOBJMETHOD(uart_receive, rt305x_uart_bus_receive), + KOBJMETHOD(uart_setsig, rt305x_uart_bus_setsig), + KOBJMETHOD(uart_transmit, rt305x_uart_bus_transmit), + { 0, 0 } +}; + +struct uart_class uart_rt305x_uart_class = { + "rt305x", + rt305x_uart_methods, + sizeof(struct rt305x_uart_softc), + .uc_ops = &uart_rt305x_uart_ops, + .uc_range = 1, /* use hinted range */ + .uc_rclk = SYSTEM_CLOCK +}; + +#define SIGCHG(c, i, s, d) \ + if (c) { \ + i |= (i & s) ? s : s | d; \ + } else { \ + i = (i & s) ? (i & ~s) | d : i; \ + } + +/* + * Disable TX interrupt. uart should be locked + */ +static __inline void +rt305x_uart_disable_txintr(struct uart_softc *sc) +{ + struct uart_bas *bas = &sc->sc_bas; + uint8_t cr; + + cr = uart_getreg(bas, UART_IER_REG); + cr &= ~UART_IER_ETBEI; + uart_setreg(bas, UART_IER_REG, cr); + uart_barrier(bas); +} + +/* + * Enable TX interrupt. uart should be locked + */ +static __inline void +rt305x_uart_enable_txintr(struct uart_softc *sc) +{ + struct uart_bas *bas = &sc->sc_bas; + uint8_t cr; + + cr = uart_getreg(bas, UART_IER_REG); + cr |= UART_IER_ETBEI; + uart_setreg(bas, UART_IER_REG, cr); + uart_barrier(bas); +} + +static int +rt305x_uart_bus_attach(struct uart_softc *sc) +{ + struct uart_bas *bas; + struct uart_devinfo *di; + + bas = &sc->sc_bas; + if (sc->sc_sysdev != NULL) { + di = sc->sc_sysdev; + rt305x_uart_init(bas, di->baudrate, di->databits, di->stopbits, + di->parity); + } else { + rt305x_uart_init(bas, 115200, 8, 1, 0); + } + + sc->sc_rxfifosz = 16; + sc->sc_txfifosz = 16; + + (void)rt305x_uart_bus_getsig(sc); + + /* Enable FIFO */ + uart_setreg(bas, UART_FCR_REG, + uart_getreg(bas, UART_FCR_REG) | + UART_FCR_FIFOEN | UART_FCR_TXTGR_1 | UART_FCR_RXTGR_1); + uart_barrier(bas); + /* Enable interrupts */ + uart_setreg(bas, UART_IER_REG, + UART_IER_EDSSI | UART_IER_ELSI | UART_IER_ERBFI); + uart_barrier(bas); + + return (0); +} + +static int +rt305x_uart_bus_detach(struct uart_softc *sc) +{ + + return (0); +} + +static int +rt305x_uart_bus_flush(struct uart_softc *sc, int what) +{ + struct uart_bas *bas = &sc->sc_bas; + uint32_t fcr = uart_getreg(bas, UART_FCR_REG); + if (what & UART_FLUSH_TRANSMITTER) { + uart_setreg(bas, UART_FCR_REG, fcr|UART_FCR_TXRST); + uart_barrier(bas); + } + if (what & UART_FLUSH_RECEIVER) { + uart_setreg(bas, UART_FCR_REG, fcr|UART_FCR_RXRST); + uart_barrier(bas); + } + uart_setreg(bas, UART_FCR_REG, fcr); + uart_barrier(bas); + return (0); +} + +static int +rt305x_uart_bus_getsig(struct uart_softc *sc) +{ + uint32_t new, old, sig; + uint8_t bes; + + do { + old = sc->sc_hwsig; + sig = old; + uart_lock(sc->sc_hwmtx); + bes = uart_getreg(&sc->sc_bas, UART_MSR_REG); + uart_unlock(sc->sc_hwmtx); + /* XXX: chip can show delta */ + SIGCHG(bes & UART_MSR_CTS, sig, SER_CTS, SER_DCTS); + SIGCHG(bes & UART_MSR_DCD, sig, SER_DCD, SER_DDCD); + SIGCHG(bes & UART_MSR_DSR, sig, SER_DSR, SER_DDSR); + new = sig & ~SER_MASK_DELTA; + } while (!atomic_cmpset_32(&sc->sc_hwsig, old, new)); + + return (sig); +} + +static int +rt305x_uart_bus_ioctl(struct uart_softc *sc, int request, intptr_t data) +{ + struct uart_bas *bas; + int baudrate, divisor, error; + + bas = &sc->sc_bas; + error = 0; + uart_lock(sc->sc_hwmtx); + switch (request) { + case UART_IOCTL_BREAK: + /* TODO: Send BREAK */ + break; + case UART_IOCTL_BAUD: + divisor = uart_getreg(bas, UART_CDDL_REG); + baudrate = bas->rclk / (divisor * 16); + *(int*)data = baudrate; + break; + default: + error = EINVAL; + break; + } + uart_unlock(sc->sc_hwmtx); + return (error); +} + +static int +rt305x_uart_bus_ipend(struct uart_softc *sc) +{ + struct uart_bas *bas; + int ipend; + uint8_t iir, lsr, msr; + + bas = &sc->sc_bas; + ipend = 0; + + uart_lock(sc->sc_hwmtx); + iir = uart_getreg(&sc->sc_bas, UART_IIR_REG); + lsr = uart_getreg(&sc->sc_bas, UART_LSR_REG); + uart_setreg(&sc->sc_bas, UART_LSR_REG, lsr); + msr = uart_getreg(&sc->sc_bas, UART_MSR_REG); + uart_setreg(&sc->sc_bas, UART_MSR_REG, msr); + if (iir & UART_IIR_INTP) { + uart_unlock(sc->sc_hwmtx); + return (0); + } + + + switch ((iir >> 1) & 0x07) { + case UART_IIR_ID_THRE: + ipend |= SER_INT_TXIDLE; + break; + case UART_IIR_ID_DR2: + rt305x_uart_bus_flush(sc, UART_FLUSH_RECEIVER); + /* passthrough */ + case UART_IIR_ID_DR: + ipend |= SER_INT_RXREADY; + break; + case UART_IIR_ID_MST: + case UART_IIR_ID_LINESTATUS: + ipend |= SER_INT_SIGCHG; + if (lsr & UART_LSR_BI) + { + ipend |= SER_INT_BREAK; +#ifdef KDB + breakpoint(); +#endif + } + if (lsr & UART_LSR_OE) + ipend |= SER_INT_OVERRUN; + break; + default: + /* XXX: maybe return error here */ + break; + } + + uart_unlock(sc->sc_hwmtx); + + return (ipend); +} + +static int +rt305x_uart_bus_param(struct uart_softc *sc, int baudrate, int databits, + int stopbits, int parity) +{ + uart_lock(sc->sc_hwmtx); + rt305x_uart_init(&sc->sc_bas, baudrate, databits, stopbits, parity); + uart_unlock(sc->sc_hwmtx); + return (0); +} + +static int +rt305x_uart_bus_probe(struct uart_softc *sc) +{ + char buf[80]; + int error; + + error = rt305x_uart_probe(&sc->sc_bas); + if (error) + return (error); + + snprintf(buf, sizeof(buf), "rt305x_uart"); + device_set_desc_copy(sc->sc_dev, buf); + + return (0); +} + +static int +rt305x_uart_bus_receive(struct uart_softc *sc) +{ + struct uart_bas *bas; + int xc; + uint8_t lsr; + + bas = &sc->sc_bas; + uart_lock(sc->sc_hwmtx); + lsr = uart_getreg(bas, UART_LSR_REG); + while ((lsr & UART_LSR_DR)) { + if (uart_rx_full(sc)) { + sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN; + break; + } + xc = 0; + xc = uart_getreg(bas, UART_RX_REG); + if (lsr & UART_LSR_FE) + xc |= UART_STAT_FRAMERR; + if (lsr & UART_LSR_PE) + xc |= UART_STAT_PARERR; + if (lsr & UART_LSR_OE) + xc |= UART_STAT_OVERRUN; + uart_barrier(bas); + uart_rx_put(sc, xc); + lsr = uart_getreg(bas, UART_LSR_REG); + } + + uart_unlock(sc->sc_hwmtx); + return (0); +} + +static int +rt305x_uart_bus_setsig(struct uart_softc *sc, int sig) +{ + + /* TODO: implement (?) */ + return (0); +} + +static int +rt305x_uart_bus_transmit(struct uart_softc *sc) +{ + struct uart_bas *bas = &sc->sc_bas; + int i; + + if (!uart_output) return (0); + + bas = &sc->sc_bas; + uart_lock(sc->sc_hwmtx); + while ((uart_getreg(bas, UART_LSR_REG) & UART_LSR_THRE) == 0) + ; + rt305x_uart_enable_txintr(sc); + for (i = 0; i < sc->sc_txdatasz; i++) { + uart_setreg(bas, UART_TX_REG, sc->sc_txbuf[i]); + uart_barrier(bas); + } + sc->sc_txbusy = 1; + uart_unlock(sc->sc_hwmtx); + return (0); +} |