diff options
Diffstat (limited to 'sys/i386/isa/sound/CHANGELOG')
| -rw-r--r-- | sys/i386/isa/sound/CHANGELOG | 200 |
1 files changed, 0 insertions, 200 deletions
diff --git a/sys/i386/isa/sound/CHANGELOG b/sys/i386/isa/sound/CHANGELOG deleted file mode 100644 index 04ff604..0000000 --- a/sys/i386/isa/sound/CHANGELOG +++ /dev/null @@ -1,200 +0,0 @@ -Changelog for version 3.5-alpha7 --------------------------------- - -Since 3.5-alpha6 -- Changed all #ifndef EXCLUDE_xx stuff to #ifdef CONFIG_xx. Modified -configure to handle this. -- Removed initialization messages from the -modularized version. They can be enabled by using init_trace=1 in -the insmod command line (insmod sound init_trace=1). -- More AIX stuff. -- Added support for syncronizing dsp/audio devices with /dev/sequencer. -- mmap() support for dsp/audio devices. - -Since 3.5-alpha5 -- AIX port. -- Changed some xxx_PATCH macros in soundcard.h to work with - big endian machines. - -Since 3.5-alpha4 -- Removed the 'setfx' stuff from the version distributed with kernel - sources. - -Since 3.5-alpha3 -- Moved stuff from the 'setfx' program to the AudioTriX Pro driver. - -Since 3.5-alpha2 -- Modifications to makefile and configure.c. Unnecessary sources - are no longer compiled. Newly created local.h is also copied to - /etc/soundconf. "make oldconfig" reads /etc/soundconf and produces - new local.h which is compatible with current version of the driver. -- Some fixes to the SB16 support. -- Fixed random protection fault in gus_wave.c - -Since 3.5-alpha1 -- Modified to work with Linux-1.3.33 and leater -- Some minor changes - -Since 3.0.2 -- Support for CS4232 based PnP cards (AcerMagic S23 etc). -- Full duplex support for some CS4231, CS4232 and AD1845 based cards -(GUA MAX, AudioTrix Pro, AcerMagic S23 and many MAD16/Mozart cards -having a codec mentioned above). -- Almost fully rewritten loadable modules support. -- Fixed some bugs. -- Huge amount of testing (more testing is still required). -- mmap() support (works with some cards). Requires much more testing. -- Sample/patch/program loading for TB Maui/Tropez. No initialization -since TB doesn't allow me to release that code. -- Using CS4231 compatible codecs as timer for /dev/music. - -Since 3.0.1 -- Added allocation of I/O ports, DMA channels and interrupts -to the initialization code. This may break modules support since -the driver may not free some resources on unload. Should be fixed soon. - -Since 3.0 -- Some important bug fixes. -- select() for /dev/dsp and /dev/audio (Linux only). -(To use select() with read, you have to call read() to start -the recording. Calling write() kills recording immediately so -use select() carefully when you are writing a half duplex app. -Full duplex mode is not implemented yet.) Select works also with -/dev/sequencer and /dev/music. Maybe with /dev/midi## too. - -Since 3.0-beta2 -- Minor fixes. -- Added Readme.cards - -Since 3.0-beta1 -- Minor fixes to the modules support. -- Eliminated call to sb_free_irq() in ad1848.c -- Rewritten MAD16&Mozart support (not tested with MAD16 Pro). -- Fix to DMA initialization of PSS cards. -- Some fixes to ad1848/cs42xx mixer support (GUS MAX, MSS, etc.) -- Fixed some bugs in the PSS driver which caused I/O errors with - the MSS mode (/dev/dsp). - -Since 3.0-950506 -- Recording with GUS MAX fixed. It works when the driver is configured - to use two DMA channels with GUS MAX (16 bit ones recommended). - -Since 3.0-94xxxx -- Too many changes - -Since 3.0-940818 -- Fixes for Linux 1.1.4x. -- Disables Disney Sound System with SG NX Pro 16 (less noise). - -Since 2.90-2 -- Fixes to soundcard.h -- Non blocking mode to /dev/sequencer -- Experimental detection code for Ensoniq Soundscape. - -Since 2.90 -- Minor and major bug fixes - -Since pre-3.0-940712 -- GUS MAX support -- Partially working MSS/WSS support (could work with some cards). -- Hardware u-Law and A-Law support with AD1848/CS4248 and CS4231 codecs - (GUS MAX, GUS16, WSS etc). Hardware ADPCM is possible with GUS16 and - GUS MAX, but it doesn't work yet. -Since pre-3.0-940426 -- AD1848/CS4248/CS4231 codec support (MSS, GUS MAX, Aztec, Orchid etc). -This codec chip is used in various soundcards. This version is developed -for the 16 bit daughtercard of GUS. It should work with other cards also -if the following requirements are met: - - The I/O, IRQ and DMA settings are jumper selectable or - the card is initialized by booting DOS before booting Linux (etc.). - - You add the IO, IRQ and DMA settings manually to the local.h. - (Just define GUS16_BASE, GUS16_IRQ and GUS16_DMA). Note that - the base address bust be the base address of the codec chip not the - card itself. For the GUS16 these are the same but most MSS compatible - cards have the codec located at card_base+4. -- Some minor changes - -Since 2.5 (******* MAJOR REWRITE ***********) - -This version is based on v2.3. I have tried to maintain two versions -together so that this one should have the same features than v2.5. -Something may still be missing. If you notice such things, please let me -know. - -The Readme.v30 contains more details. - -- /dev/midi## devices. -- /dev/sequencer2 - -Since 2.5-beta2 -- Some fine tuning to the GUS v3.7 mixer code. -- Fixed speed limits for the plain SB (1.0 to 2.0). - -Since 2.5-beta -- Fixed OPL-3 detection with SB. Caused problems with PAS16. -- GUS v3.7 mixer support. - -Since 2.4 -- Mixer support for Sound Galaxy NX Pro (define __SGNXPRO__ on your local.h). -- Fixed truncated sound on /dev/dsp when the device is closed. -- Linear volume mode for GUS -- Pitch bends larger than +/- 2 octaves. -- MIDI recording for SB and SB Pro. (Untested). -- Some other fixes. -- SB16 MIDI and DSP drivers only initialized if SB16 actually installed. -- Implemented better detection for OPL-3. This should be useful if you - have an old SB Pro (the non-OPL-3 one) or a SB 2.0 clone which has a OPL-3. -- SVR4.2 support by Ian Hartas. Initial ALPHA TEST version (untested). - -Since 2.3b -- Fixed bug which made it impossible to make long recordings to disk. - Recording was not restarted after a buffer overflow situation. -- Limited mixer support for GUS. -- Numerous improvements to the GUS driver by Andrew Robinson. Including - some click removal etc. - -Since 2.3 -- Fixed some minor bugs in the SB16 driver. - -Since 2.2b -- Full SB16 DSP support. 8/16 bit, mono/stereo -- The SCO and FreeBSD versions should be in sync now. There are some - problems with SB16 and GUS in the freebsd versions. - The DMA buffer allocation of the SCO version has been polished but - there could still be some problems. At least it hogs memory. - The DMA channel - configuration method used in the sco/System is a hack. -- Support for the MPU emulation of the SB16. -- Some big arrays are now allocated boot time. This makes the bss segment - smaller which makes it possible to use the full driver with - NetBSD. These arrays are not allocated if no suitable soundcard is available. -- Fixed a bug in the compute_and_set_volume in gus_wave.c -- Fixed the too fast mono playback problem of SB Pro and PAS16. - -Since 2.2 -- Stereo recording for SB Pro. Somehow it was missing and nobody - had noticed it earlier. -- Minor polishing. -- Interpreting of boot time arguments (sound=) for Linux. -- Breakup of sb_dsp.c. Parts of the code has been moved to - sb_mixer.c and sb_midi.c - -Since 2.1 -- Preliminary support for SB16. - - The SB16 mixer is supported in its native mode. - - Digitized voice capability up to 44.1 kHz/8 bit/mono - (16 bit and stereo support coming in the next release). -- Fixed some bugs in the digitized voice driver for PAS16. -- Proper initialization of the SB emulation of latest PAS16 models. - -- Significantly improved /dev/dsp and /dev/audio support. - - Now supports half duplex mode. It's now possible to record and - playback without closing and reopening the device. - - It's possible to use smaller buffers than earlier. There is a new - ioctl(fd, SNDCTL_DSP_SUBDIVIDE, &n) where n should be 1, 2 or 4. - This call instructs the driver to use smaller buffers. The default - buffer size (0.5 to 1.0 seconds) is divided by n. Should be called - immediately after opening the device. - -Since 2.0 -Just cosmetic changes. |
