diff options
Diffstat (limited to 'sys/i386/conf/NOTES')
| -rw-r--r-- | sys/i386/conf/NOTES | 68 |
1 files changed, 3 insertions, 65 deletions
diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES index 2781547..ce72ee1 100644 --- a/sys/i386/conf/NOTES +++ b/sys/i386/conf/NOTES @@ -2,7 +2,7 @@ # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # -# $Id: LINT,v 1.517 1998/12/27 13:40:55 phk Exp $ +# $Id: LINT,v 1.518 1998/12/27 13:55:47 sos Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -1142,28 +1142,6 @@ device en0 device en1 options NATM #native ATM -# -# Audio drivers: `snd', `sb', `pas', `gus', `pca' -# -# snd: Voxware sound support code -# sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum -# sbxvi: SoundBlaster 16 -# sbmidi: SoundBlaster 16 MIDI interface -# pas: ProAudioSpectrum PCM and MIDI -# gus: Gravis Ultrasound - Ultrasound, Ultrasound 16, Ultrasound MAX -# gusxvi: Gravis Ultrasound 16-bit PCM (do not use) -# mss: Microsoft Sound System -# css: Crystal Sound System (CSS 423x PnP) -# sscape: Ensoniq Soundscape MIDI interface -# sscape_mss: Ensoniq Soundscape PCM (requires sscape) -# opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum -# uart: stand-alone 6850 UART for MIDI -# mpu: Roland MPU-401 stand-alone card -# -# Beware! The addresses specified below are also hard-coded in -# i386/isa/sound/sound_config.h. If you change the values here, you -# must also change the values in the include file. -# # pcm: PCM audio through various sound cards. # # This is the work in progress from Luigi Rizzo. This has support for @@ -1181,48 +1159,8 @@ options NATM #native ATM # This driver will use the new PnP code if it's available. # # pca: PCM audio through your PC speaker -# -# If you have a GUS-MAX card and want to use the CS4231 codec on the -# card the drqs for the gus max must be 8 bit (1, 2, or 3). -# -# If you would like to use the full duplex option on the gus, then define -# flags to be the ``read dma channel''. -# -# options BROKEN_BUS_CLOCK #PAS-16 isn't working and OPTI chipset -# options SYMPHONY_PAS #PAS-16 isn't working and SYMPHONY chipset -# options EXCLUDE_SBPRO #PAS-16 -# options SBC_IRQ=5 #PAS-16. Must match irq on sb0 line. -# PAS16: The order of the pas0/sb0/opl0 is important since the -# sb emulation is enabled in the pas-16 attach. -# -# To overide the GUS defaults use: -# options GUS_DMA2 -# options GUS_DMA -# options GUS_IRQ -# -# The i386/isa/sound/sound.doc has more information. - -# Controls all "VOXWARE" driver sound devices. See Luigi's driver -# below for an alternate which may work better for some cards. -# -controller snd0 -device pas0 at isa? port 0x388 irq 10 drq 6 -device sb0 at isa? port 0x220 irq 5 drq 1 -device sbxvi0 at isa? drq 5 -device sbmidi0 at isa? port 0x330 -device awe0 at isa? port 0x620 -device gus0 at isa? port 0x220 irq 12 drq 1 -#device gus0 at isa? port 0x220 irq 12 drq 1 flags 0x3 -device mss0 at isa? port 0x530 irq 10 drq 1 -device css0 at isa? port 0x534 irq 5 drq 1 flags 0x08 -device sscape0 at isa? port 0x330 irq 9 drq 0 -device trix0 at isa? port 0x330 irq 6 drq 0 -device sscape_mss0 at isa? port 0x534 irq 5 drq 1 -device opl0 at isa? port 0x388 -device mpu0 at isa? port 0x330 irq 6 drq 0 -device uart0 at isa? port 0x330 irq 5 - -# Luigi's snd code (use INSTEAD of snd0 and all VOXWARE drivers!). + +# Luigi's snd code. # You may also wish to enable the pnp controller with this, for pnp # sound cards. # |
