diff options
Diffstat (limited to 'sys/dev/usb/wlan/if_uath.c')
-rw-r--r-- | sys/dev/usb/wlan/if_uath.c | 40 |
1 files changed, 20 insertions, 20 deletions
diff --git a/sys/dev/usb/wlan/if_uath.c b/sys/dev/usb/wlan/if_uath.c index 1c12a9c..29f2398 100644 --- a/sys/dev/usb/wlan/if_uath.c +++ b/sys/dev/usb/wlan/if_uath.c @@ -338,7 +338,7 @@ uath_match(device_t dev) if (uaa->info.bIfaceIndex != UATH_IFACE_INDEX) return (ENXIO); - return (usb2_lookup_id_by_uaa(uath_devs, sizeof(uath_devs), uaa)); + return (usbd_lookup_id_by_uaa(uath_devs, sizeof(uath_devs), uaa)); } static int @@ -357,7 +357,7 @@ uath_attach(device_t dev) #ifdef UATH_DEBUG sc->sc_debug = uath_debug; #endif - device_set_usb2_desc(dev); + device_set_usb_desc(dev); /* * Only post-firmware devices here. @@ -378,11 +378,11 @@ uath_attach(device_t dev) goto fail; } - error = usb2_transfer_setup(uaa->device, &iface_index, sc->sc_xfer, + error = usbd_transfer_setup(uaa->device, &iface_index, sc->sc_xfer, uath_usbconfig, UATH_N_XFERS, sc, &sc->sc_mtx); if (error) { device_printf(dev, "could not allocate USB transfers, " - "err=%s\n", usb2_errstr(error)); + "err=%s\n", usbd_errstr(error)); goto fail1; } @@ -497,7 +497,7 @@ uath_attach(device_t dev) fail4: if_free(ifp); fail3: UATH_UNLOCK(sc); -fail2: usb2_transfer_unsetup(sc->sc_xfer, UATH_N_XFERS); +fail2: usbd_transfer_unsetup(sc->sc_xfer, UATH_N_XFERS); fail1: uath_free_cmd_list(sc, sc->sc_cmd, UATH_CMD_LIST_COUNT); fail: return (error); @@ -519,7 +519,7 @@ uath_detach(device_t dev) callout_drain(&sc->stat_ch); callout_drain(&sc->watchdog_ch); - usb2_transfer_unsetup(sc->sc_xfer, UATH_N_XFERS); + usbd_transfer_unsetup(sc->sc_xfer, UATH_N_XFERS); ieee80211_ifdetach(ic); /* free buffers */ @@ -735,10 +735,10 @@ uath_cmdsend(struct uath_softc *sc, uint32_t code, const void *idata, int ilen, STAILQ_INSERT_TAIL(&sc->sc_cmd_pending, cmd, next); UATH_STAT_INC(sc, st_cmd_pending); - usb2_transfer_start(sc->sc_xfer[UATH_INTR_TX]); + usbd_transfer_start(sc->sc_xfer[UATH_INTR_TX]); if (cmd->flags & UATH_CMD_FLAG_READ) { - usb2_transfer_start(sc->sc_xfer[UATH_INTR_RX]); + usbd_transfer_start(sc->sc_xfer[UATH_INTR_RX]); /* wait at most two seconds for command reply */ error = mtx_sleep(cmd, &sc->sc_mtx, 0, "uathcmd", 2 * hz); @@ -1168,7 +1168,7 @@ uath_init_locked(void *arg) /* XXX? check */ uath_cmd_write(sc, WDCMSG_RESET_KEY_CACHE, NULL, 0, 0); - usb2_transfer_start(sc->sc_xfer[UATH_BULK_RX]); + usbd_transfer_start(sc->sc_xfer[UATH_BULK_RX]); /* enable Rx */ uath_set_rxfilter(sc, 0x0, UATH_FILTER_OP_INIT); uath_set_rxfilter(sc, @@ -1355,7 +1355,7 @@ uath_abort_xfers(struct uath_softc *sc) UATH_ASSERT_LOCKED(sc); /* abort any pending transfers */ for (i = 0; i < UATH_N_XFERS; i++) - usb2_transfer_stop(sc->sc_xfer[i]); + usbd_transfer_stop(sc->sc_xfer[i]); } static int @@ -1425,7 +1425,7 @@ uath_dataflush(struct uath_softc *sc) STAILQ_INSERT_TAIL(&sc->sc_tx_pending, data, next); UATH_STAT_INC(sc, st_tx_pending); sc->sc_tx_timer = 5; - usb2_transfer_start(sc->sc_xfer[UATH_BULK_TX]); + usbd_transfer_start(sc->sc_xfer[UATH_BULK_TX]); return (0); } @@ -1692,7 +1692,7 @@ uath_tx_start(struct uath_softc *sc, struct mbuf *m0, struct ieee80211_node *ni, STAILQ_INSERT_TAIL(&sc->sc_tx_pending, data, next); UATH_STAT_INC(sc, st_tx_pending); - usb2_transfer_start(sc->sc_xfer[UATH_BULK_TX]); + usbd_transfer_start(sc->sc_xfer[UATH_BULK_TX]); return (0); } @@ -2401,12 +2401,12 @@ uath_intr_rx_callback(struct usb_xfer *xfer) KASSERT(xfer->actlen >= sizeof(struct uath_cmd_hdr), ("short xfer error")); - usb2_copy_out(xfer->frbuffers, 0, cmd->buf, xfer->actlen); + usbd_copy_out(xfer->frbuffers, 0, cmd->buf, xfer->actlen); uath_cmdeof(sc, cmd); case USB_ST_SETUP: setup: xfer->frlengths[0] = xfer->max_data_length; - usb2_start_hardware(xfer); + usbd_transfer_submit(xfer); break; default: if (xfer->error != USB_ERR_CANCELLED) { @@ -2456,9 +2456,9 @@ setup: else UATH_STAT_INC(sc, st_cmd_active); - usb2_set_frame_data(xfer, cmd->buf, 0); + usbd_set_frame_data(xfer, cmd->buf, 0); xfer->frlengths[0] = cmd->buflen; - usb2_start_hardware(xfer); + usbd_transfer_submit(xfer); break; default: if (xfer->error != USB_ERR_CANCELLED) { @@ -2708,9 +2708,9 @@ setup: UATH_STAT_DEC(sc, st_rx_inactive); STAILQ_INSERT_TAIL(&sc->sc_rx_active, data, next); UATH_STAT_INC(sc, st_rx_active); - usb2_set_frame_data(xfer, data->buf, 0); + usbd_set_frame_data(xfer, data->buf, 0); xfer->frlengths[0] = xfer->max_data_length; - usb2_start_hardware(xfer); + usbd_transfer_submit(xfer); /* * To avoid LOR we should unlock our private mutex here to call @@ -2818,9 +2818,9 @@ setup: STAILQ_INSERT_TAIL(&sc->sc_tx_active, data, next); UATH_STAT_INC(sc, st_tx_active); - usb2_set_frame_data(xfer, data->buf, 0); + usbd_set_frame_data(xfer, data->buf, 0); xfer->frlengths[0] = data->buflen; - usb2_start_hardware(xfer); + usbd_transfer_submit(xfer); UATH_UNLOCK(sc); uath_start(ifp); |