diff options
Diffstat (limited to 'sys/dev/usb/quirk/usb_quirk.h')
| -rw-r--r-- | sys/dev/usb/quirk/usb_quirk.h | 58 |
1 files changed, 35 insertions, 23 deletions
diff --git a/sys/dev/usb/quirk/usb_quirk.h b/sys/dev/usb/quirk/usb_quirk.h index d681402..856ab89 100644 --- a/sys/dev/usb/quirk/usb_quirk.h +++ b/sys/dev/usb/quirk/usb_quirk.h @@ -59,31 +59,43 @@ enum { /* keep in sync with usb_quirk_str table */ UQ_CFG_INDEX_3, /* select configuration index 3 by default */ UQ_CFG_INDEX_4, /* select configuration index 4 by default */ UQ_CFG_INDEX_0, /* select configuration index 0 by default */ - UQ_ASSUME_CM_OVER_DATA, /* modem device breaks on cm over data */ + UQ_ASSUME_CM_OVER_DATA, /* assume cm over data feature */ /* USB Mass Storage Quirks. See "storage/umass.c" for a detailed description. */ - UQ_MSC_NO_TEST_UNIT_READY, - UQ_MSC_NO_RS_CLEAR_UA, - UQ_MSC_NO_START_STOP, - UQ_MSC_NO_GETMAXLUN, - UQ_MSC_NO_INQUIRY, - UQ_MSC_NO_INQUIRY_EVPD, - UQ_MSC_NO_SYNC_CACHE, - UQ_MSC_SHUTTLE_INIT, - UQ_MSC_ALT_IFACE_1, - UQ_MSC_FLOPPY_SPEED, - UQ_MSC_IGNORE_RESIDUE, - UQ_MSC_WRONG_CSWSIG, - UQ_MSC_RBC_PAD_TO_12, - UQ_MSC_READ_CAP_OFFBY1, - UQ_MSC_FORCE_SHORT_INQ, - UQ_MSC_FORCE_WIRE_BBB, - UQ_MSC_FORCE_WIRE_CBI, - UQ_MSC_FORCE_WIRE_CBI_I, - UQ_MSC_FORCE_PROTO_SCSI, - UQ_MSC_FORCE_PROTO_ATAPI, - UQ_MSC_FORCE_PROTO_UFI, - UQ_MSC_FORCE_PROTO_RBC, + UQ_MSC_NO_TEST_UNIT_READY, /* send start/stop instead of TUR */ + UQ_MSC_NO_RS_CLEAR_UA, /* does not reset Unit Att. */ + UQ_MSC_NO_START_STOP, /* does not support start/stop */ + UQ_MSC_NO_GETMAXLUN, /* does not support get max LUN */ + UQ_MSC_NO_INQUIRY, /* fake generic inq response */ + UQ_MSC_NO_INQUIRY_EVPD, /* does not support inq EVPD */ + UQ_MSC_NO_SYNC_CACHE, /* does not support sync cache */ + UQ_MSC_SHUTTLE_INIT, /* requires Shuttle init sequence */ + UQ_MSC_ALT_IFACE_1, /* switch to alternate interface 1 */ + UQ_MSC_FLOPPY_SPEED, /* does floppy speeds (20kb/s) */ + UQ_MSC_IGNORE_RESIDUE, /* gets residue wrong */ + UQ_MSC_WRONG_CSWSIG, /* uses wrong CSW signature */ + UQ_MSC_RBC_PAD_TO_12, /* pad RBC requests to 12 bytes */ + UQ_MSC_READ_CAP_OFFBY1, /* reports sector count, not max sec. */ + UQ_MSC_FORCE_SHORT_INQ, /* does not support full inq. */ + UQ_MSC_FORCE_WIRE_BBB, /* force BBB wire protocol */ + UQ_MSC_FORCE_WIRE_CBI, /* force CBI wire protocol */ + UQ_MSC_FORCE_WIRE_CBI_I, /* force CBI with int. wire protocol */ + UQ_MSC_FORCE_PROTO_SCSI, /* force SCSI command protocol */ + UQ_MSC_FORCE_PROTO_ATAPI, /* force ATAPI command protocol */ + UQ_MSC_FORCE_PROTO_UFI, /* force UFI command protocol */ + UQ_MSC_FORCE_PROTO_RBC, /* force RBC command protocol */ + + /* Ejection of mass storage (driver disk) */ + UQ_MSC_EJECT_HUAWEI, /* ejects after Huawei USB command */ + UQ_MSC_EJECT_SIERRA, /* ejects after Sierra USB command */ + UQ_MSC_EJECT_SCSIEJECT, /* ejects after SCSI eject command */ + UQ_MSC_EJECT_REZERO, /* ejects after SCSI rezero command */ + UQ_MSC_EJECT_ZTESTOR, /* ejects after ZTE SCSI command */ + UQ_MSC_EJECT_CMOTECH, /* ejects after C-motech SCSI cmd */ + UQ_MSC_EJECT_WAIT, /* wait for the device to eject */ + UQ_MSC_EJECT_SAEL_M460, /* ejects after Sael USB commands */ + UQ_MSC_EJECT_HUAWEISCSI, /* ejects after Huawei SCSI command */ + UQ_MSC_EJECT_TCT, /* ejects after TCT SCSI command */ USB_QUIRK_MAX }; |
