summaryrefslogtreecommitdiffstats
path: root/sys/dev/en
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/en')
-rw-r--r--sys/dev/en/midway.c3208
-rw-r--r--sys/dev/en/midwayreg.h304
-rw-r--r--sys/dev/en/midwayvar.h205
3 files changed, 3717 insertions, 0 deletions
diff --git a/sys/dev/en/midway.c b/sys/dev/en/midway.c
new file mode 100644
index 0000000..e7d5e30
--- /dev/null
+++ b/sys/dev/en/midway.c
@@ -0,0 +1,3208 @@
+/* $NetBSD: midway.c,v 1.25 1997/03/20 21:34:42 chuck Exp $ */
+/* (sync'd to midway.c 1.67) */
+
+/*
+ *
+ * Copyright (c) 1996 Charles D. Cranor and Washington University.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Charles D. Cranor and
+ * Washington University.
+ * 4. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ *
+ * m i d w a y . c e n i 1 5 5 d r i v e r
+ *
+ * author: Chuck Cranor <chuck@ccrc.wustl.edu>
+ * started: spring, 1996 (written from scratch).
+ *
+ * notes from the author:
+ * Extra special thanks go to Werner Almesberger, EPFL LRC. Werner's
+ * ENI driver was especially useful in figuring out how this card works.
+ * I would also like to thank Werner for promptly answering email and being
+ * generally helpful.
+ */
+
+
+#undef EN_DEBUG
+#undef EN_DEBUG_RANGE /* check ranges on en_read/en_write's? */
+#define EN_MBUF_OPT /* try and put more stuff in mbuf? */
+#define EN_DIAG
+#define EN_STAT
+#ifndef EN_DMA
+#define EN_DMA 1 /* use dma? */
+#endif
+#define EN_NOTXDMA 0 /* hook to disable tx dma only */
+#define EN_NORXDMA 0 /* hook to disable rx dma only */
+#define EN_NOWMAYBE 1 /* hook to disable word maybe DMA */
+ /* XXX: WMAYBE doesn't work, needs debugging */
+#define EN_DDBHOOK 1 /* compile in ddb functions */
+#ifdef __FreeBSD__
+/* somehow, misaligned DMA doesn't work on FreeBSD with ENI card.
+ * not sure if this is specific to FreeBSD.
+ * anyway, always fix unaligned or word fragmented mbufs. --kjc */
+#define EN_FIXMBUF
+#endif
+
+#if defined(DIAGNOSTIC) && !defined(EN_DIAG)
+#define EN_DIAG /* link in with master DIAG option */
+#endif
+#ifdef EN_STAT
+#define EN_COUNT(X) (X)++
+#else
+#define EN_COUNT(X) /* nothing */
+#endif
+
+#ifdef EN_DEBUG
+#undef EN_DDBHOOK
+#define EN_DDBHOOK 1
+#define STATIC /* nothing */
+#define INLINE /* nothing */
+#else /* EN_DEBUG */
+#define STATIC static
+#define INLINE inline
+#endif /* EN_DEBUG */
+
+#ifdef __FreeBSD__
+#include "en.h"
+#endif
+
+#if NEN > 0 || !defined(__FreeBSD__)
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/types.h>
+#if defined(__NetBSD__) || defined(__OpenBSD__) || defined(__bsdi__)
+#include <sys/device.h>
+#endif
+#if defined(__FreeBSD__)
+#include <sys/sockio.h>
+#else
+#include <sys/ioctl.h>
+#endif
+#include <sys/mbuf.h>
+#include <sys/socket.h>
+#include <sys/socketvar.h>
+
+#include <net/if.h>
+#include <net/if_atm.h>
+
+#include <vm/vm.h>
+
+#ifdef INET
+#include <netinet/if_atm.h>
+#endif
+
+#ifdef NATM
+#include <netinet/in.h>
+#include <netnatm/natm.h>
+#endif
+
+
+#if !defined(sparc) && !defined(__FreeBSD__)
+#include <machine/bus.h>
+#endif
+
+#if defined(__NetBSD__) || defined(__OpenBSD__)
+#include <dev/ic/midwayreg.h>
+#include <dev/ic/midwayvar.h>
+#if defined(__alpha__)
+/* XXX XXX NEED REAL DMA MAPPING SUPPORT XXX XXX */
+#undef vtophys
+#define vtophys(va) alpha_XXX_dmamap((vm_offset_t)(va))
+#endif
+#elif defined(__FreeBSD__)
+#include <machine/cpufunc.h> /* for rdtsc proto for clock.h below */
+#include <machine/clock.h> /* for DELAY */
+#include <dev/en/midwayreg.h>
+#include <dev/en/midwayvar.h>
+#include <vm/pmap.h> /* for vtophys proto */
+
+/*
+ * 2.1.x does not have if_softc. detect this by seeing if IFF_NOTRAILERS
+ * is defined, as per kjc.
+ */
+#ifdef IFF_NOTRAILERS
+#define MISSING_IF_SOFTC
+#else
+#define IFF_NOTRAILERS 0
+#endif
+
+#endif /* __FreeBSD__ */
+
+/*
+ * params
+ */
+
+#ifndef EN_TXHIWAT
+#define EN_TXHIWAT (64*1024) /* max 64 KB waiting to be DMAd out */
+#endif
+
+#ifndef EN_MINDMA
+#define EN_MINDMA 32 /* don't DMA anything less than this (bytes) */
+#endif
+
+#define RX_NONE 0xffff /* recv VC not in use */
+
+#define EN_OBHDR ATM_PH_DRIVER7 /* TBD in first mbuf ! */
+#define EN_OBTRL ATM_PH_DRIVER8 /* PDU trailier in last mbuf ! */
+
+#define ENOTHER_FREE 0x01 /* free rxslot */
+#define ENOTHER_DRAIN 0x02 /* almost free (drain DRQ dma) */
+#define ENOTHER_RAW 0x04 /* 'raw' access (aka boodi mode) */
+#define ENOTHER_SWSL 0x08 /* in software service list */
+
+int en_dma = EN_DMA; /* use DMA (switch off for dbg) */
+
+/*
+ * autoconfig attachments
+ */
+
+struct cfdriver en_cd = {
+ 0, "en", DV_IFNET,
+};
+
+/*
+ * local structures
+ */
+
+/*
+ * params to en_txlaunch() function
+ */
+
+struct en_launch {
+ u_int32_t tbd1; /* TBD 1 */
+ u_int32_t tbd2; /* TBD 2 */
+ u_int32_t pdu1; /* PDU 1 (aal5) */
+ int nodma; /* don't use DMA */
+ int need; /* total space we need (pad out if less data) */
+ int mlen; /* length of mbuf (for dtq) */
+ struct mbuf *t; /* data */
+ u_int32_t aal; /* aal code */
+ u_int32_t atm_vci; /* vci */
+ u_int8_t atm_flags; /* flags */
+};
+
+
+/*
+ * dma table (index by # of words)
+ *
+ * plan A: use WMAYBE
+ * plan B: avoid WMAYBE
+ */
+
+struct en_dmatab {
+ u_int8_t bcode; /* code */
+ u_int8_t divshift; /* byte divisor */
+};
+
+static struct en_dmatab en_dma_planA[] = {
+ { 0, 0 }, /* 0 */ { MIDDMA_WORD, 2 }, /* 1 */
+ { MIDDMA_2WORD, 3}, /* 2 */ { MIDDMA_4WMAYBE, 2}, /* 3 */
+ { MIDDMA_4WORD, 4}, /* 4 */ { MIDDMA_8WMAYBE, 2}, /* 5 */
+ { MIDDMA_8WMAYBE, 2}, /* 6 */ { MIDDMA_8WMAYBE, 2}, /* 7 */
+ { MIDDMA_8WORD, 5}, /* 8 */ { MIDDMA_16WMAYBE, 2}, /* 9 */
+ { MIDDMA_16WMAYBE,2}, /* 10 */ { MIDDMA_16WMAYBE, 2}, /* 11 */
+ { MIDDMA_16WMAYBE,2}, /* 12 */ { MIDDMA_16WMAYBE, 2}, /* 13 */
+ { MIDDMA_16WMAYBE,2}, /* 14 */ { MIDDMA_16WMAYBE, 2}, /* 15 */
+ { MIDDMA_16WORD, 6}, /* 16 */
+};
+
+static struct en_dmatab en_dma_planB[] = {
+ { 0, 0 }, /* 0 */ { MIDDMA_WORD, 2}, /* 1 */
+ { MIDDMA_2WORD, 3}, /* 2 */ { MIDDMA_WORD, 2}, /* 3 */
+ { MIDDMA_4WORD, 4}, /* 4 */ { MIDDMA_WORD, 2}, /* 5 */
+ { MIDDMA_2WORD, 3}, /* 6 */ { MIDDMA_WORD, 2}, /* 7 */
+ { MIDDMA_8WORD, 5}, /* 8 */ { MIDDMA_WORD, 2}, /* 9 */
+ { MIDDMA_2WORD, 3}, /* 10 */ { MIDDMA_WORD, 2}, /* 11 */
+ { MIDDMA_4WORD, 4}, /* 12 */ { MIDDMA_WORD, 2}, /* 13 */
+ { MIDDMA_2WORD, 3}, /* 14 */ { MIDDMA_WORD, 2}, /* 15 */
+ { MIDDMA_16WORD, 6}, /* 16 */
+};
+
+static struct en_dmatab *en_dmaplan = en_dma_planA;
+
+/*
+ * prototypes
+ */
+
+STATIC int en_b2sz __P((int));
+#ifdef EN_DDBHOOK
+int en_dump __P((int,int));
+int en_dumpmem __P((int,int,int));
+#endif
+STATIC void en_dmaprobe __P((struct en_softc *));
+STATIC int en_dmaprobe_doit __P((struct en_softc *, u_int8_t *,
+ u_int8_t *, int));
+STATIC int en_dqneed __P((struct en_softc *, caddr_t, u_int, u_int));
+STATIC void en_init __P((struct en_softc *));
+STATIC int en_ioctl __P((struct ifnet *, EN_IOCTL_CMDT, caddr_t));
+STATIC int en_k2sz __P((int));
+STATIC void en_loadvc __P((struct en_softc *, int));
+STATIC int en_mfix __P((struct en_softc *, struct mbuf **, struct mbuf *));
+STATIC struct mbuf *en_mget __P((struct en_softc *, u_int, u_int *));
+STATIC u_int32_t en_read __P((struct en_softc *, u_int32_t));
+STATIC int en_rxctl __P((struct en_softc *, struct atm_pseudoioctl *, int));
+STATIC void en_txdma __P((struct en_softc *, int));
+STATIC void en_txlaunch __P((struct en_softc *, int, struct en_launch *));
+STATIC void en_service __P((struct en_softc *));
+STATIC void en_start __P((struct ifnet *));
+STATIC int en_sz2b __P((int));
+STATIC void en_write __P((struct en_softc *, u_int32_t, u_int32_t));
+
+/*
+ * macros/inline
+ */
+
+/*
+ * raw read/write macros
+ */
+
+#define EN_READDAT(SC,R) en_read(SC,R)
+#define EN_WRITEDAT(SC,R,V) en_write(SC,R,V)
+
+/*
+ * cooked read/write macros
+ */
+
+#define EN_READ(SC,R) ntohl(en_read(SC,R))
+#define EN_WRITE(SC,R,V) en_write(SC,R, htonl(V))
+
+#define EN_WRAPADD(START,STOP,CUR,VAL) { \
+ (CUR) = (CUR) + (VAL); \
+ if ((CUR) >= (STOP)) \
+ (CUR) = (START) + ((CUR) - (STOP)); \
+ }
+
+#define WORD_IDX(START, X) (((X) - (START)) / sizeof(u_int32_t))
+
+/* we store sc->dtq and sc->drq data in the following format... */
+#define EN_DQ_MK(SLOT,LEN) (((SLOT) << 20)|(LEN)|(0x80000))
+ /* the 0x80000 ensures we != 0 */
+#define EN_DQ_SLOT(X) ((X) >> 20)
+#define EN_DQ_LEN(X) ((X) & 0x3ffff)
+
+/* format of DTQ/DRQ word 1 differs between ENI and ADP */
+#if defined(MIDWAY_ENIONLY)
+
+#define MID_MK_TXQ(SC,CNT,CHAN,END,BCODE) \
+ EN_WRITE((SC), (SC)->dtq_us, \
+ MID_MK_TXQ_ENI((CNT), (CHAN), (END), (BCODE)));
+
+#define MID_MK_RXQ(SC,CNT,VCI,END,BCODE) \
+ EN_WRITE((SC), (SC)->drq_us, \
+ MID_MK_RXQ_ENI((CNT), (VCI), (END), (BCODE)));
+
+#elif defined(MIDWAY_ADPONLY)
+
+#define MID_MK_TXQ(SC,CNT,CHAN,END,JK) \
+ EN_WRITE((SC), (SC)->dtq_us, \
+ MID_MK_TXQ_ADP((CNT), (CHAN), (END), (JK)));
+
+#define MID_MK_RXQ(SC,CNT,VCI,END,JK) \
+ EN_WRITE((SC), (SC)->drq_us, \
+ MID_MK_RXQ_ADP((CNT), (VCI), (END), (JK)));
+
+#else
+
+#define MID_MK_TXQ(SC,CNT,CHAN,END,JK_OR_BCODE) { \
+ if ((SC)->is_adaptec) \
+ EN_WRITE((SC), (SC)->dtq_us, \
+ MID_MK_TXQ_ADP((CNT), (CHAN), (END), (JK_OR_BCODE))); \
+ else \
+ EN_WRITE((SC), (SC)->dtq_us, \
+ MID_MK_TXQ_ENI((CNT), (CHAN), (END), (JK_OR_BCODE))); \
+ }
+
+#define MID_MK_RXQ(SC,CNT,VCI,END,JK_OR_BCODE) { \
+ if ((SC)->is_adaptec) \
+ EN_WRITE((SC), (SC)->drq_us, \
+ MID_MK_RXQ_ADP((CNT), (VCI), (END), (JK_OR_BCODE))); \
+ else \
+ EN_WRITE((SC), (SC)->drq_us, \
+ MID_MK_RXQ_ENI((CNT), (VCI), (END), (JK_OR_BCODE))); \
+ }
+
+#endif
+
+/* add an item to the DTQ */
+#define EN_DTQADD(SC,CNT,CHAN,JK_OR_BCODE,ADDR,LEN,END) { \
+ if (END) \
+ (SC)->dtq[MID_DTQ_A2REG((SC)->dtq_us)] = EN_DQ_MK(CHAN,LEN); \
+ MID_MK_TXQ(SC,CNT,CHAN,END,JK_OR_BCODE); \
+ (SC)->dtq_us += 4; \
+ EN_WRITE((SC), (SC)->dtq_us, (ADDR)); \
+ EN_WRAPADD(MID_DTQOFF, MID_DTQEND, (SC)->dtq_us, 4); \
+ (SC)->dtq_free--; \
+ if (END) \
+ EN_WRITE((SC), MID_DMA_WRTX, MID_DTQ_A2REG((SC)->dtq_us)); \
+}
+
+/* DRQ add macro */
+#define EN_DRQADD(SC,CNT,VCI,JK_OR_BCODE,ADDR,LEN,SLOT,END) { \
+ if (END) \
+ (SC)->drq[MID_DRQ_A2REG((SC)->drq_us)] = EN_DQ_MK(SLOT,LEN); \
+ MID_MK_RXQ(SC,CNT,VCI,END,JK_OR_BCODE); \
+ (SC)->drq_us += 4; \
+ EN_WRITE((SC), (SC)->drq_us, (ADDR)); \
+ EN_WRAPADD(MID_DRQOFF, MID_DRQEND, (SC)->drq_us, 4); \
+ (SC)->drq_free--; \
+ if (END) \
+ EN_WRITE((SC), MID_DMA_WRRX, MID_DRQ_A2REG((SC)->drq_us)); \
+}
+
+/*
+ * the driver code
+ *
+ * the code is arranged in a specific way:
+ * [1] short/inline functions
+ * [2] autoconfig stuff
+ * [3] ioctl stuff
+ * [4] reset -> init -> trasmit -> intr -> receive functions
+ *
+ */
+
+/***********************************************************************/
+
+/*
+ * en_read: read a word from the card. this is the only function
+ * that reads from the card.
+ */
+
+STATIC INLINE u_int32_t en_read(sc, r)
+
+struct en_softc *sc;
+u_int32_t r;
+
+{
+
+#ifdef EN_DEBUG_RANGE
+ if (r > MID_MAXOFF || (r % 4)) {
+ printf("en_read out of range, r=0x%x\n", r);
+ panic("en_read");
+ }
+#endif
+
+ return(bus_space_read_4(sc->en_memt, sc->en_base, r));
+}
+
+/*
+ * en_write: write a word to the card. this is the only function that
+ * writes to the card.
+ */
+
+STATIC INLINE void en_write(sc, r, v)
+
+struct en_softc *sc;
+u_int32_t r, v;
+
+{
+#ifdef EN_DEBUG_RANGE
+ if (r > MID_MAXOFF || (r % 4)) {
+ printf("en_write out of range, r=0x%x\n", r);
+ panic("en_write");
+ }
+#endif
+
+ bus_space_write_4(sc->en_memt, sc->en_base, r, v);
+}
+
+/*
+ * en_k2sz: convert KBytes to a size parameter (a log2)
+ */
+
+STATIC INLINE int en_k2sz(k)
+
+int k;
+
+{
+ switch(k) {
+ case 1: return(0);
+ case 2: return(1);
+ case 4: return(2);
+ case 8: return(3);
+ case 16: return(4);
+ case 32: return(5);
+ case 64: return(6);
+ case 128: return(7);
+ default: panic("en_k2sz");
+ }
+ return(0);
+}
+#define en_log2(X) en_k2sz(X)
+
+
+/*
+ * en_b2sz: convert a DMA burst code to its byte size
+ */
+
+STATIC INLINE int en_b2sz(b)
+
+int b;
+
+{
+ switch (b) {
+ case MIDDMA_WORD: return(1*4);
+ case MIDDMA_2WMAYBE:
+ case MIDDMA_2WORD: return(2*4);
+ case MIDDMA_4WMAYBE:
+ case MIDDMA_4WORD: return(4*4);
+ case MIDDMA_8WMAYBE:
+ case MIDDMA_8WORD: return(8*4);
+ case MIDDMA_16WMAYBE:
+ case MIDDMA_16WORD: return(16*4);
+ default: panic("en_b2sz");
+ }
+ return(0);
+}
+
+
+/*
+ * en_sz2b: convert a burst size (bytes) to DMA burst code
+ */
+
+STATIC INLINE int en_sz2b(sz)
+
+int sz;
+
+{
+ switch (sz) {
+ case 1*4: return(MIDDMA_WORD);
+ case 2*4: return(MIDDMA_2WORD);
+ case 4*4: return(MIDDMA_4WORD);
+ case 8*4: return(MIDDMA_8WORD);
+ case 16*4: return(MIDDMA_16WORD);
+ default: panic("en_sz2b");
+ }
+ return(0);
+}
+
+
+/*
+ * en_dqneed: calculate number of DTQ/DRQ's needed for a buffer
+ */
+
+STATIC INLINE int en_dqneed(sc, data, len, tx)
+
+struct en_softc *sc;
+caddr_t data;
+u_int len, tx;
+
+{
+ int result, needalign, sz;
+
+#if !defined(MIDWAY_ENIONLY)
+#if !defined(MIDWAY_ADPONLY)
+ if (sc->is_adaptec)
+#endif /* !MIDWAY_ADPONLY */
+ return(1); /* adaptec can DMA anything in one go */
+#endif
+
+#if !defined(MIDWAY_ADPONLY)
+ result = 0;
+ if (len < EN_MINDMA) {
+ if (!tx) /* XXX: conservative */
+ return(1); /* will copy/DMA_JK */
+ }
+
+ if (tx) { /* byte burst? */
+ needalign = (((unsigned long) data) % sizeof(u_int32_t));
+ if (needalign) {
+ result++;
+ sz = min(len, sizeof(u_int32_t) - needalign);
+ len -= sz;
+ data += sz;
+ }
+ }
+
+ if (sc->alburst && len) {
+ needalign = (((unsigned long) data) & sc->bestburstmask);
+ if (needalign) {
+ result++; /* alburst */
+ sz = min(len, sc->bestburstlen - needalign);
+ len -= sz;
+ }
+ }
+
+ if (len >= sc->bestburstlen) {
+ sz = len / sc->bestburstlen;
+ sz = sz * sc->bestburstlen;
+ len -= sz;
+ result++; /* best shot */
+ }
+
+ if (len) {
+ result++; /* clean up */
+ if (tx && (len % sizeof(u_int32_t)) != 0)
+ result++; /* byte cleanup */
+ }
+
+ return(result);
+#endif /* !MIDWAY_ADPONLY */
+}
+
+
+/*
+ * en_mget: get an mbuf chain that can hold totlen bytes and return it
+ * (for recv) [based on am7990_get from if_le and ieget from if_ie]
+ * after this call the sum of all the m_len's in the chain will be totlen.
+ */
+
+STATIC INLINE struct mbuf *en_mget(sc, totlen, drqneed)
+
+struct en_softc *sc;
+u_int totlen, *drqneed;
+
+{
+ struct mbuf *m;
+ struct mbuf *top, **mp;
+ *drqneed = 0;
+
+ MGETHDR(m, M_DONTWAIT, MT_DATA);
+ if (m == NULL)
+ return(NULL);
+ m->m_pkthdr.rcvif = &sc->enif;
+ m->m_pkthdr.len = totlen;
+ m->m_len = MHLEN;
+ top = NULL;
+ mp = &top;
+
+ /* if (top != NULL) then we've already got 1 mbuf on the chain */
+ while (totlen > 0) {
+ if (top) {
+ MGET(m, M_DONTWAIT, MT_DATA);
+ if (!m) {
+ m_freem(top);
+ return(NULL); /* out of mbufs */
+ }
+ m->m_len = MLEN;
+ }
+ if (top && totlen >= MINCLSIZE) {
+ MCLGET(m, M_DONTWAIT);
+ if (m->m_flags & M_EXT)
+ m->m_len = MCLBYTES;
+ }
+ m->m_len = min(totlen, m->m_len);
+ totlen -= m->m_len;
+ *mp = m;
+ mp = &m->m_next;
+
+ *drqneed += en_dqneed(sc, m->m_data, m->m_len, 0);
+
+ }
+ return(top);
+}
+
+/***********************************************************************/
+
+/*
+ * autoconfig stuff
+ */
+
+void en_attach(sc)
+
+struct en_softc *sc;
+
+{
+ struct ifnet *ifp = &sc->enif;
+ int sz;
+ u_int32_t reg, lcv, check, ptr, sav, midvloc;
+
+ /*
+ * probe card to determine memory size. the stupid ENI card always
+ * reports to PCI that it needs 4MB of space (2MB regs and 2MB RAM).
+ * if it has less than 2MB RAM the addresses wrap in the RAM address space.
+ * (i.e. on a 512KB card addresses 0x3ffffc, 0x37fffc, and 0x2ffffc
+ * are aliases for 0x27fffc [note that RAM starts at offset 0x200000]).
+ */
+
+ if (sc->en_busreset)
+ sc->en_busreset(sc);
+ EN_WRITE(sc, MID_RESID, 0x0); /* reset card before touching RAM */
+ for (lcv = MID_PROBEOFF; lcv <= MID_MAXOFF ; lcv += MID_PROBSIZE) {
+ EN_WRITE(sc, lcv, lcv); /* data[address] = address */
+ for (check = MID_PROBEOFF ; check < lcv ; check += MID_PROBSIZE) {
+ reg = EN_READ(sc, check);
+ if (reg != check) { /* found an alias! */
+ goto done_probe; /* and quit */
+ }
+ }
+ }
+done_probe:
+ lcv -= MID_PROBSIZE; /* take one step back */
+ sc->en_obmemsz = (lcv + 4) - MID_RAMOFF;
+
+ /*
+ * determine the largest DMA burst supported
+ */
+
+ en_dmaprobe(sc);
+
+ /*
+ * "hello world"
+ */
+
+ if (sc->en_busreset)
+ sc->en_busreset(sc);
+ EN_WRITE(sc, MID_RESID, 0x0); /* reset */
+ for (lcv = MID_RAMOFF ; lcv < MID_RAMOFF + sc->en_obmemsz ; lcv += 4)
+ EN_WRITE(sc, lcv, 0); /* zero memory */
+
+ reg = EN_READ(sc, MID_RESID);
+
+ printf("%s: ATM midway v%d, board IDs %d.%d, %s%s%s, %ldKB on-board RAM\n",
+ sc->sc_dev.dv_xname, MID_VER(reg), MID_MID(reg), MID_DID(reg),
+ (MID_IS_SABRE(reg)) ? "sabre controller, " : "",
+ (MID_IS_SUNI(reg)) ? "SUNI" : "Utopia",
+ (!MID_IS_SUNI(reg) && MID_IS_UPIPE(reg)) ? " (pipelined)" : "",
+ sc->en_obmemsz / 1024);
+
+ if (sc->is_adaptec) {
+ if (sc->bestburstlen == 64 && sc->alburst == 0)
+ printf("%s: passed 64 byte DMA test\n", sc->sc_dev.dv_xname);
+ else
+ printf("%s: FAILED DMA TEST: burst=%d, alburst=%d\n",
+ sc->sc_dev.dv_xname, sc->bestburstlen, sc->alburst);
+ } else {
+ printf("%s: maximum DMA burst length = %d bytes%s\n", sc->sc_dev.dv_xname,
+ sc->bestburstlen, (sc->alburst) ? " (must align)" : "");
+ }
+
+#if 0 /* WMAYBE doesn't work, don't complain about it */
+ /* check if en_dmaprobe disabled wmaybe */
+ if (en_dmaplan == en_dma_planB)
+ printf("%s: note: WMAYBE DMA has been disabled\n", sc->sc_dev.dv_xname);
+#endif
+
+ /*
+ * link into network subsystem and prepare card
+ */
+
+#if defined(__NetBSD__) || defined(__OpenBSD__)
+ bcopy(sc->sc_dev.dv_xname, sc->enif.if_xname, IFNAMSIZ);
+#endif
+#if !defined(MISSING_IF_SOFTC)
+ sc->enif.if_softc = sc;
+#endif
+ ifp->if_flags = IFF_SIMPLEX|IFF_NOTRAILERS;
+ ifp->if_ioctl = en_ioctl;
+ ifp->if_output = atm_output;
+ ifp->if_start = en_start;
+
+ /*
+ * init softc
+ */
+
+ for (lcv = 0 ; lcv < MID_N_VC ; lcv++) {
+ sc->rxvc2slot[lcv] = RX_NONE;
+ sc->txspeed[lcv] = 0; /* full */
+ sc->txvc2slot[lcv] = 0; /* full speed == slot 0 */
+ }
+
+ sz = sc->en_obmemsz - (MID_BUFOFF - MID_RAMOFF);
+ ptr = sav = MID_BUFOFF;
+ ptr = roundup(ptr, EN_TXSZ * 1024); /* align */
+ sz = sz - (ptr - sav);
+ if (EN_TXSZ*1024 * EN_NTX > sz) {
+ printf("%s: EN_NTX/EN_TXSZ too big\n", sc->sc_dev.dv_xname);
+ return;
+ }
+ for (lcv = 0 ; lcv < EN_NTX ; lcv++) {
+ sc->txslot[lcv].mbsize = 0;
+ sc->txslot[lcv].start = ptr;
+ ptr += (EN_TXSZ * 1024);
+ sz -= (EN_TXSZ * 1024);
+ sc->txslot[lcv].stop = ptr;
+ sc->txslot[lcv].nref = 0;
+ bzero(&sc->txslot[lcv].indma, sizeof(sc->txslot[lcv].indma));
+ bzero(&sc->txslot[lcv].q, sizeof(sc->txslot[lcv].q));
+#ifdef EN_DEBUG
+ printf("%s: tx%d: start 0x%x, stop 0x%x\n", sc->sc_dev.dv_xname, lcv,
+ sc->txslot[lcv].start, sc->txslot[lcv].stop);
+#endif
+ }
+
+ sav = ptr;
+ ptr = roundup(ptr, EN_RXSZ * 1024); /* align */
+ sz = sz - (ptr - sav);
+ sc->en_nrx = sz / (EN_RXSZ * 1024);
+ if (sc->en_nrx <= 0) {
+ printf("%s: EN_NTX/EN_TXSZ/EN_RXSZ too big\n", sc->sc_dev.dv_xname);
+ return;
+ }
+#if 1
+ /* leave one entry in the ringbuf unused to avoid wraparound */
+ if (sc->en_nrx >= MID_N_VC)
+ sc->en_nrx = MID_N_VC - 1;
+#endif
+ for (lcv = 0 ; lcv < sc->en_nrx ; lcv++) {
+ sc->rxslot[lcv].rxhand = NULL;
+ sc->rxslot[lcv].oth_flags = ENOTHER_FREE;
+ bzero(&sc->rxslot[lcv].indma, sizeof(sc->rxslot[lcv].indma));
+ bzero(&sc->rxslot[lcv].q, sizeof(sc->rxslot[lcv].q));
+ midvloc = sc->rxslot[lcv].start = ptr;
+ ptr += (EN_RXSZ * 1024);
+ sz -= (EN_RXSZ * 1024);
+ sc->rxslot[lcv].stop = ptr;
+ midvloc = midvloc - MID_RAMOFF;
+ midvloc = (midvloc & ~((EN_RXSZ*1024) - 1)) >> 2; /* mask, cvt to words */
+ midvloc = midvloc >> MIDV_LOCTOPSHFT; /* we only want the top 11 bits */
+ midvloc = (midvloc & MIDV_LOCMASK) << MIDV_LOCSHIFT;
+ sc->rxslot[lcv].mode = midvloc |
+ (en_k2sz(EN_RXSZ) << MIDV_SZSHIFT) | MIDV_TRASH;
+
+#ifdef EN_DEBUG
+ printf("%s: rx%d: start 0x%x, stop 0x%x, mode 0x%x\n", sc->sc_dev.dv_xname,
+ lcv, sc->rxslot[lcv].start, sc->rxslot[lcv].stop, sc->rxslot[lcv].mode);
+#endif
+ }
+
+#ifdef EN_STAT
+ sc->vtrash = sc->otrash = sc->mfix = sc->txmbovr = sc->dmaovr = 0;
+ sc->txoutspace = sc->txdtqout = sc->launch = sc->lheader = sc->ltail = 0;
+ sc->hwpull = sc->swadd = sc->rxqnotus = sc->rxqus = sc->rxoutboth = 0;
+ sc->rxdrqout = sc->ttrash = sc->rxmbufout = sc->mfixfail = 0;
+ sc->headbyte = sc->tailbyte = sc->tailflush = 0;
+#endif
+ sc->need_drqs = sc->need_dtqs = 0;
+
+ printf("%s: %d %dKB receive buffers, %d %dKB transmit buffers allocated\n",
+ sc->sc_dev.dv_xname, sc->en_nrx, EN_RXSZ, EN_NTX, EN_TXSZ);
+
+ /*
+ * final commit
+ */
+
+ if_attach(ifp);
+ atm_ifattach(ifp);
+
+}
+
+
+/*
+ * en_dmaprobe: helper function for en_attach.
+ *
+ * see how the card handles DMA by running a few DMA tests. we need
+ * to figure out the largest number of bytes we can DMA in one burst
+ * ("bestburstlen"), and if the starting address for a burst needs to
+ * be aligned on any sort of boundary or not ("alburst").
+ *
+ * typical findings:
+ * sparc1: bestburstlen=4, alburst=0 (ick, broken DMA!)
+ * sparc2: bestburstlen=64, alburst=1
+ * p166: bestburstlen=64, alburst=0
+ */
+
+STATIC void en_dmaprobe(sc)
+
+struct en_softc *sc;
+
+{
+ u_int32_t srcbuf[64], dstbuf[64];
+ u_int8_t *sp, *dp;
+ int bestalgn, bestnotalgn, lcv, try, fail;
+
+ sc->alburst = 0;
+
+ sp = (u_int8_t *) srcbuf;
+ while ((((unsigned long) sp) % MIDDMA_MAXBURST) != 0)
+ sp += 4;
+ dp = (u_int8_t *) dstbuf;
+ while ((((unsigned long) dp) % MIDDMA_MAXBURST) != 0)
+ dp += 4;
+
+ bestalgn = bestnotalgn = en_dmaprobe_doit(sc, sp, dp, 0);
+
+ for (lcv = 4 ; lcv < MIDDMA_MAXBURST ; lcv += 4) {
+ try = en_dmaprobe_doit(sc, sp+lcv, dp+lcv, 0);
+ if (try < bestnotalgn)
+ bestnotalgn = try;
+ }
+
+ if (bestalgn != bestnotalgn) /* need bursts aligned */
+ sc->alburst = 1;
+
+ sc->bestburstlen = bestalgn;
+ sc->bestburstshift = en_log2(bestalgn);
+ sc->bestburstmask = sc->bestburstlen - 1; /* must be power of 2 */
+ sc->bestburstcode = en_sz2b(bestalgn);
+
+ if (sc->bestburstlen <= 2*sizeof(u_int32_t))
+ return; /* won't be using WMAYBE */
+
+ /*
+ * adaptec does not have (or need) wmaybe. do not bother testing
+ * for it.
+ */
+ if (sc->is_adaptec) {
+ /* XXX, actually don't need a DMA plan: adaptec is smarter than that */
+ en_dmaplan = en_dma_planB;
+ return;
+ }
+
+ /*
+ * test that WMAYBE dma works like we think it should
+ * (i.e. no alignment restrictions on host address other than alburst)
+ */
+
+ try = sc->bestburstlen - 4;
+ fail = 0;
+ fail += en_dmaprobe_doit(sc, sp, dp, try);
+ for (lcv = 4 ; lcv < sc->bestburstlen ; lcv += 4) {
+ fail += en_dmaprobe_doit(sc, sp+lcv, dp+lcv, try);
+ if (sc->alburst)
+ try -= 4;
+ }
+ if (EN_NOWMAYBE || fail) {
+ if (fail)
+ printf("%s: WARNING: WMAYBE DMA test failed %d time(s)\n",
+ sc->sc_dev.dv_xname, fail);
+ en_dmaplan = en_dma_planB; /* fall back to plan B */
+ }
+
+}
+
+
+/*
+ * en_dmaprobe_doit: do actual testing
+ */
+
+int
+en_dmaprobe_doit(sc, sp, dp, wmtry)
+
+struct en_softc *sc;
+u_int8_t *sp, *dp;
+int wmtry;
+
+{
+ int lcv, retval = 4, cnt, count;
+ u_int32_t reg, bcode, midvloc;
+
+ /*
+ * set up a 1k buffer at MID_BUFOFF
+ */
+
+ if (sc->en_busreset)
+ sc->en_busreset(sc);
+ EN_WRITE(sc, MID_RESID, 0x0); /* reset card before touching RAM */
+
+ midvloc = ((MID_BUFOFF - MID_RAMOFF) / sizeof(u_int32_t)) >> MIDV_LOCTOPSHFT;
+ EN_WRITE(sc, MIDX_PLACE(0), MIDX_MKPLACE(en_k2sz(1), midvloc));
+ EN_WRITE(sc, MID_VC(0), (midvloc << MIDV_LOCSHIFT)
+ | (en_k2sz(1) << MIDV_SZSHIFT) | MIDV_TRASH);
+ EN_WRITE(sc, MID_DST_RP(0), 0);
+ EN_WRITE(sc, MID_WP_ST_CNT(0), 0);
+
+ for (lcv = 0 ; lcv < 68 ; lcv++) /* set up sample data */
+ sp[lcv] = lcv+1;
+ EN_WRITE(sc, MID_MAST_CSR, MID_MCSR_ENDMA); /* enable DMA (only) */
+
+ sc->drq_chip = MID_DRQ_REG2A(EN_READ(sc, MID_DMA_RDRX));
+ sc->dtq_chip = MID_DTQ_REG2A(EN_READ(sc, MID_DMA_RDTX));
+
+ /*
+ * try it now . . . DMA it out, then DMA it back in and compare
+ *
+ * note: in order to get the dma stuff to reverse directions it wants
+ * the "end" flag set! since we are not dma'ing valid data we may
+ * get an ident mismatch interrupt (which we will ignore).
+ *
+ * note: we've got two different tests rolled up in the same loop
+ * if (wmtry)
+ * then we are doing a wmaybe test and wmtry is a byte count
+ * else we are doing a burst test
+ */
+
+ for (lcv = 8 ; lcv <= MIDDMA_MAXBURST ; lcv = lcv * 2) {
+
+ /* zero SRAM and dest buffer */
+ for (cnt = 0 ; cnt < 1024; cnt += 4)
+ EN_WRITE(sc, MID_BUFOFF+cnt, 0); /* zero memory */
+ for (cnt = 0 ; cnt < 68 ; cnt++)
+ dp[cnt] = 0;
+
+ if (wmtry) {
+ count = (sc->bestburstlen - sizeof(u_int32_t)) / sizeof(u_int32_t);
+ bcode = en_dmaplan[count].bcode;
+ count = wmtry >> en_dmaplan[count].divshift;
+ } else {
+ bcode = en_sz2b(lcv);
+ count = 1;
+ }
+ if (sc->is_adaptec)
+ EN_WRITE(sc, sc->dtq_chip, MID_MK_TXQ_ADP(lcv, 0, MID_DMA_END, 0));
+ else
+ EN_WRITE(sc, sc->dtq_chip, MID_MK_TXQ_ENI(count, 0, MID_DMA_END, bcode));
+ EN_WRITE(sc, sc->dtq_chip+4, vtophys(sp));
+ EN_WRITE(sc, MID_DMA_WRTX, MID_DTQ_A2REG(sc->dtq_chip+8));
+ cnt = 1000;
+ while (EN_READ(sc, MID_DMA_RDTX) == MID_DTQ_A2REG(sc->dtq_chip)) {
+ DELAY(1);
+ cnt--;
+ if (cnt == 0) {
+ printf("%s: unexpected timeout in tx DMA test\n", sc->sc_dev.dv_xname);
+ return(retval); /* timeout, give up */
+ }
+ }
+ EN_WRAPADD(MID_DTQOFF, MID_DTQEND, sc->dtq_chip, 8);
+ reg = EN_READ(sc, MID_INTACK);
+ if ((reg & MID_INT_DMA_TX) != MID_INT_DMA_TX) {
+ printf("%s: unexpected status in tx DMA test: 0x%x\n",
+ sc->sc_dev.dv_xname, reg);
+ return(retval);
+ }
+ EN_WRITE(sc, MID_MAST_CSR, MID_MCSR_ENDMA); /* re-enable DMA (only) */
+
+ /* "return to sender..." address is known ... */
+
+ if (sc->is_adaptec)
+ EN_WRITE(sc, sc->drq_chip, MID_MK_RXQ_ADP(lcv, 0, MID_DMA_END, 0));
+ else
+ EN_WRITE(sc, sc->drq_chip, MID_MK_RXQ_ENI(count, 0, MID_DMA_END, bcode));
+ EN_WRITE(sc, sc->drq_chip+4, vtophys(dp));
+ EN_WRITE(sc, MID_DMA_WRRX, MID_DRQ_A2REG(sc->drq_chip+8));
+ cnt = 1000;
+ while (EN_READ(sc, MID_DMA_RDRX) == MID_DRQ_A2REG(sc->drq_chip)) {
+ DELAY(1);
+ cnt--;
+ if (cnt == 0) {
+ printf("%s: unexpected timeout in rx DMA test\n", sc->sc_dev.dv_xname);
+ return(retval); /* timeout, give up */
+ }
+ }
+ EN_WRAPADD(MID_DRQOFF, MID_DRQEND, sc->drq_chip, 8);
+ reg = EN_READ(sc, MID_INTACK);
+ if ((reg & MID_INT_DMA_RX) != MID_INT_DMA_RX) {
+ printf("%s: unexpected status in rx DMA test: 0x%x\n",
+ sc->sc_dev.dv_xname, reg);
+ return(retval);
+ }
+ EN_WRITE(sc, MID_MAST_CSR, MID_MCSR_ENDMA); /* re-enable DMA (only) */
+
+ if (wmtry) {
+ return(bcmp(sp, dp, wmtry)); /* wmtry always exits here, no looping */
+ }
+
+ if (bcmp(sp, dp, lcv))
+ return(retval); /* failed, use last value */
+
+ retval = lcv;
+
+ }
+ return(retval); /* studly 64 byte DMA present! oh baby!! */
+}
+
+/***********************************************************************/
+
+/*
+ * en_ioctl: handle ioctl requests
+ *
+ * NOTE: if you add an ioctl to set txspeed, you should choose a new
+ * TX channel/slot. Choose the one with the lowest sc->txslot[slot].nref
+ * value, subtract one from sc->txslot[0].nref, add one to the
+ * sc->txslot[slot].nref, set sc->txvc2slot[vci] = slot, and then set
+ * txspeed[vci].
+ */
+
+STATIC int en_ioctl(ifp, cmd, data)
+
+struct ifnet *ifp;
+EN_IOCTL_CMDT cmd;
+caddr_t data;
+
+{
+#ifdef MISSING_IF_SOFTC
+ struct en_softc *sc = (struct en_softc *) en_cd.cd_devs[ifp->if_unit];
+#else
+ struct en_softc *sc = (struct en_softc *) ifp->if_softc;
+#endif
+ struct ifaddr *ifa = (struct ifaddr *) data;
+ struct ifreq *ifr = (struct ifreq *) data;
+ struct atm_pseudoioctl *api = (struct atm_pseudoioctl *)data;
+#ifdef NATM
+ struct atm_rawioctl *ario = (struct atm_rawioctl *)data;
+ int slot;
+#endif
+ int s, error = 0;
+
+ s = splnet();
+
+ switch (cmd) {
+ case SIOCATMENA: /* enable circuit for recv */
+ error = en_rxctl(sc, api, 1);
+ break;
+
+ case SIOCATMDIS: /* disable circuit for recv */
+ error = en_rxctl(sc, api, 0);
+ break;
+
+#ifdef NATM
+ case SIOCXRAWATM:
+ if ((slot = sc->rxvc2slot[ario->npcb->npcb_vci]) == RX_NONE) {
+ error = EINVAL;
+ break;
+ }
+ if (ario->rawvalue > EN_RXSZ*1024)
+ ario->rawvalue = EN_RXSZ*1024;
+ if (ario->rawvalue) {
+ sc->rxslot[slot].oth_flags |= ENOTHER_RAW;
+ sc->rxslot[slot].raw_threshold = ario->rawvalue;
+ } else {
+ sc->rxslot[slot].oth_flags &= (~ENOTHER_RAW);
+ sc->rxslot[slot].raw_threshold = 0;
+ }
+#ifdef EN_DEBUG
+ printf("%s: rxvci%d: turn %s raw (boodi) mode\n",
+ sc->sc_dev.dv_xname, ario->npcb->npcb_vci,
+ (ario->rawvalue) ? "on" : "off");
+#endif
+ break;
+#endif
+ case SIOCSIFADDR:
+ ifp->if_flags |= IFF_UP;
+#ifdef INET
+ if (ifa->ifa_addr->sa_family == AF_INET) {
+ en_reset(sc);
+ en_init(sc);
+ ifa->ifa_rtrequest = atm_rtrequest; /* ??? */
+ break;
+ }
+#endif /* INET */
+ /* what to do if not INET? */
+ en_reset(sc);
+ en_init(sc);
+ break;
+
+ case SIOCGIFADDR:
+ error = EINVAL;
+ break;
+
+ case SIOCSIFFLAGS:
+ error = EINVAL;
+ break;
+
+#if defined(SIOCSIFMTU) /* ??? copied from if_de */
+#if !defined(ifr_mtu)
+#define ifr_mtu ifr_metric
+#endif
+ case SIOCSIFMTU:
+ /*
+ * Set the interface MTU.
+ */
+#ifdef notsure
+ if (ifr->ifr_mtu > ATMMTU) {
+ error = EINVAL;
+ break;
+ }
+#endif
+ ifp->if_mtu = ifr->ifr_mtu;
+ /* XXXCDC: do we really need to reset on MTU size change? */
+ en_reset(sc);
+ en_init(sc);
+ break;
+#endif /* SIOCSIFMTU */
+
+ default:
+ error = EINVAL;
+ break;
+ }
+ splx(s);
+ return error;
+}
+
+
+/*
+ * en_rxctl: turn on and off VCs for recv.
+ */
+
+STATIC int en_rxctl(sc, pi, on)
+
+struct en_softc *sc;
+struct atm_pseudoioctl *pi;
+int on;
+
+{
+ u_int s, vci, flags, slot;
+ u_int32_t oldmode, newmode;
+
+ vci = ATM_PH_VCI(&pi->aph);
+ flags = ATM_PH_FLAGS(&pi->aph);
+
+#ifdef EN_DEBUG
+ printf("%s: %s vpi=%d, vci=%d, flags=%d\n", sc->sc_dev.dv_xname,
+ (on) ? "enable" : "disable", ATM_PH_VPI(&pi->aph), vci, flags);
+#endif
+
+ if (ATM_PH_VPI(&pi->aph) || vci >= MID_N_VC)
+ return(EINVAL);
+
+ /*
+ * turn on VCI!
+ */
+
+ if (on) {
+ if (sc->rxvc2slot[vci] != RX_NONE)
+ return(EINVAL);
+ for (slot = 0 ; slot < sc->en_nrx ; slot++)
+ if (sc->rxslot[slot].oth_flags & ENOTHER_FREE)
+ break;
+ if (slot == sc->en_nrx)
+ return(ENOSPC);
+ sc->rxvc2slot[vci] = slot;
+ sc->rxslot[slot].rxhand = NULL;
+ oldmode = sc->rxslot[slot].mode;
+ newmode = (flags & ATM_PH_AAL5) ? MIDV_AAL5 : MIDV_NOAAL;
+ sc->rxslot[slot].mode = MIDV_SETMODE(oldmode, newmode);
+ sc->rxslot[slot].atm_vci = vci;
+ sc->rxslot[slot].atm_flags = flags;
+ sc->rxslot[slot].oth_flags = 0;
+ sc->rxslot[slot].rxhand = pi->rxhand;
+ if (sc->rxslot[slot].indma.ifq_head || sc->rxslot[slot].q.ifq_head)
+ panic("en_rxctl: left over mbufs on enable");
+ sc->txspeed[vci] = 0; /* full speed to start */
+ sc->txvc2slot[vci] = 0; /* init value */
+ sc->txslot[0].nref++; /* bump reference count */
+ en_loadvc(sc, vci); /* does debug printf for us */
+ return(0);
+ }
+
+ /*
+ * turn off VCI
+ */
+
+ if (sc->rxvc2slot[vci] == RX_NONE)
+ return(EINVAL);
+ slot = sc->rxvc2slot[vci];
+ if ((sc->rxslot[slot].oth_flags & (ENOTHER_FREE|ENOTHER_DRAIN)) != 0)
+ return(EINVAL);
+ s = splimp(); /* block out enintr() */
+ oldmode = EN_READ(sc, MID_VC(vci));
+ newmode = MIDV_SETMODE(oldmode, MIDV_TRASH) & ~MIDV_INSERVICE;
+ EN_WRITE(sc, MID_VC(vci), (newmode | (oldmode & MIDV_INSERVICE)));
+ /* halt in tracks, be careful to preserve inserivce bit */
+ DELAY(27);
+ sc->rxslot[slot].rxhand = NULL;
+ sc->rxslot[slot].mode = newmode;
+
+ sc->txslot[sc->txvc2slot[vci]].nref--;
+ sc->txspeed[vci] = 0;
+ sc->txvc2slot[vci] = 0;
+
+ /* if stuff is still going on we are going to have to drain it out */
+ if (sc->rxslot[slot].indma.ifq_head ||
+ sc->rxslot[slot].q.ifq_head ||
+ (sc->rxslot[slot].oth_flags & ENOTHER_SWSL) != 0) {
+ sc->rxslot[slot].oth_flags |= ENOTHER_DRAIN;
+ } else {
+ sc->rxslot[slot].oth_flags = ENOTHER_FREE;
+ sc->rxslot[slot].atm_vci = RX_NONE;
+ sc->rxvc2slot[vci] = RX_NONE;
+ }
+ splx(s); /* enable enintr() */
+#ifdef EN_DEBUG
+ printf("%s: rx%d: VCI %d is now %s\n", sc->sc_dev.dv_xname, slot, vci,
+ (sc->rxslot[slot].oth_flags & ENOTHER_DRAIN) ? "draining" : "free");
+#endif
+ return(0);
+}
+
+/***********************************************************************/
+
+/*
+ * en_reset: reset the board, throw away work in progress.
+ * must en_init to recover.
+ */
+
+void en_reset(sc)
+
+struct en_softc *sc;
+
+{
+ struct mbuf *m;
+ int lcv, slot;
+
+#ifdef EN_DEBUG
+ printf("%s: reset\n", sc->sc_dev.dv_xname);
+#endif
+
+ if (sc->en_busreset)
+ sc->en_busreset(sc);
+ EN_WRITE(sc, MID_RESID, 0x0); /* reset hardware */
+
+ /*
+ * recv: dump any mbufs we are dma'ing into, if DRAINing, then a reset
+ * will free us!
+ */
+
+ for (lcv = 0 ; lcv < MID_N_VC ; lcv++) {
+ if (sc->rxvc2slot[lcv] == RX_NONE)
+ continue;
+ slot = sc->rxvc2slot[lcv];
+ while (1) {
+ IF_DEQUEUE(&sc->rxslot[slot].indma, m);
+ if (m == NULL)
+ break; /* >>> exit 'while(1)' here <<< */
+ m_freem(m);
+ }
+ while (1) {
+ IF_DEQUEUE(&sc->rxslot[slot].q, m);
+ if (m == NULL)
+ break; /* >>> exit 'while(1)' here <<< */
+ m_freem(m);
+ }
+ sc->rxslot[slot].oth_flags &= ~ENOTHER_SWSL;
+ if (sc->rxslot[slot].oth_flags & ENOTHER_DRAIN) {
+ sc->rxslot[slot].oth_flags = ENOTHER_FREE;
+ sc->rxvc2slot[lcv] = RX_NONE;
+#ifdef EN_DEBUG
+ printf("%s: rx%d: VCI %d is now free\n", sc->sc_dev.dv_xname, slot, lcv);
+#endif
+ }
+ }
+
+ /*
+ * xmit: dump everything
+ */
+
+ for (lcv = 0 ; lcv < EN_NTX ; lcv++) {
+ while (1) {
+ IF_DEQUEUE(&sc->txslot[lcv].indma, m);
+ if (m == NULL)
+ break; /* >>> exit 'while(1)' here <<< */
+ m_freem(m);
+ }
+ while (1) {
+ IF_DEQUEUE(&sc->txslot[lcv].q, m);
+ if (m == NULL)
+ break; /* >>> exit 'while(1)' here <<< */
+ m_freem(m);
+ }
+ sc->txslot[lcv].mbsize = 0;
+ }
+
+ return;
+}
+
+
+/*
+ * en_init: init board and sync the card with the data in the softc.
+ */
+
+STATIC void en_init(sc)
+
+struct en_softc *sc;
+
+{
+ int vc, slot;
+ u_int32_t loc;
+
+ if ((sc->enif.if_flags & IFF_UP) == 0) {
+#ifdef EN_DEBUG
+ printf("%s: going down\n", sc->sc_dev.dv_xname);
+#endif
+ en_reset(sc); /* to be safe */
+ sc->enif.if_flags &= ~IFF_RUNNING; /* disable */
+ return;
+ }
+
+#ifdef EN_DEBUG
+ printf("%s: going up\n", sc->sc_dev.dv_xname);
+#endif
+ sc->enif.if_flags |= IFF_RUNNING; /* enable */
+
+ if (sc->en_busreset)
+ sc->en_busreset(sc);
+ EN_WRITE(sc, MID_RESID, 0x0); /* reset */
+
+ /*
+ * init obmem data structures: vc tab, dma q's, slist.
+ */
+
+ for (vc = 0 ; vc < MID_N_VC ; vc++)
+ en_loadvc(sc, vc);
+
+ bzero(&sc->drq, sizeof(sc->drq));
+#if 1
+ /* leave one entry in the ringbuf unused to avoid wraparound */
+ sc->drq_free = MID_DRQ_N - 1;
+#else
+ sc->drq_free = MID_DRQ_N;
+#endif
+ sc->drq_chip = MID_DRQ_REG2A(EN_READ(sc, MID_DMA_RDRX));
+ EN_WRITE(sc, MID_DMA_WRRX, MID_DRQ_A2REG(sc->drq_chip));
+ /* ensure zero queue */
+ sc->drq_us = sc->drq_chip;
+
+ bzero(&sc->dtq, sizeof(sc->dtq));
+#if 1
+ /* leave one entry in the ringbuf unused to avoid wraparound */
+ sc->dtq_free = MID_DTQ_N - 1;
+#else
+ sc->dtq_free = MID_DTQ_N;
+#endif
+ sc->dtq_chip = MID_DTQ_REG2A(EN_READ(sc, MID_DMA_RDTX));
+ EN_WRITE(sc, MID_DMA_WRTX, MID_DRQ_A2REG(sc->dtq_chip));
+ /* ensure zero queue */
+ sc->dtq_us = sc->dtq_chip;
+
+ sc->hwslistp = MID_SL_REG2A(EN_READ(sc, MID_SERV_WRITE));
+ sc->swsl_size = sc->swsl_head = sc->swsl_tail = 0;
+
+#ifdef EN_DEBUG
+ printf("%s: drq free/chip: %d/0x%x, dtq free/chip: %d/0x%x, hwslist: 0x%x\n",
+ sc->sc_dev.dv_xname, sc->drq_free, sc->drq_chip,
+ sc->dtq_free, sc->dtq_chip, sc->hwslistp);
+#endif
+
+ for (slot = 0 ; slot < EN_NTX ; slot++) {
+ sc->txslot[slot].bfree = EN_TXSZ * 1024;
+ EN_WRITE(sc, MIDX_READPTR(slot), 0);
+ EN_WRITE(sc, MIDX_DESCSTART(slot), 0);
+ loc = sc->txslot[slot].cur = sc->txslot[slot].start;
+ loc = loc - MID_RAMOFF;
+ loc = (loc & ~((EN_TXSZ*1024) - 1)) >> 2; /* mask, cvt to words */
+ loc = loc >> MIDV_LOCTOPSHFT; /* top 11 bits */
+ EN_WRITE(sc, MIDX_PLACE(slot), MIDX_MKPLACE(en_k2sz(EN_TXSZ), loc));
+#ifdef EN_DEBUG
+ printf("%s: tx%d: place 0x%x\n", sc->sc_dev.dv_xname, slot,
+ EN_READ(sc, MIDX_PLACE(slot)));
+#endif
+ }
+
+ /*
+ * enable!
+ */
+
+ EN_WRITE(sc, MID_INTENA, MID_INT_TX|MID_INT_DMA_OVR|MID_INT_IDENT|
+ MID_INT_LERR|MID_INT_DMA_ERR|MID_INT_DMA_RX|MID_INT_DMA_TX|
+ MID_INT_SERVICE| /* >>> MID_INT_SUNI| XXXCDC<<< */ MID_INT_STATS);
+ EN_WRITE(sc, MID_MAST_CSR, MID_SETIPL(sc->ipl)|MID_MCSR_ENDMA|
+ MID_MCSR_ENTX|MID_MCSR_ENRX);
+
+}
+
+
+/*
+ * en_loadvc: load a vc tab entry from a slot
+ */
+
+STATIC void en_loadvc(sc, vc)
+
+struct en_softc *sc;
+int vc;
+
+{
+ int slot;
+ u_int32_t reg = EN_READ(sc, MID_VC(vc));
+
+ reg = MIDV_SETMODE(reg, MIDV_TRASH);
+ EN_WRITE(sc, MID_VC(vc), reg);
+ DELAY(27);
+
+ if ((slot = sc->rxvc2slot[vc]) == RX_NONE)
+ return;
+
+ /* no need to set CRC */
+ EN_WRITE(sc, MID_DST_RP(vc), 0); /* read pointer = 0, desc. start = 0 */
+ EN_WRITE(sc, MID_WP_ST_CNT(vc), 0); /* write pointer = 0 */
+ EN_WRITE(sc, MID_VC(vc), sc->rxslot[slot].mode); /* set mode, size, loc */
+ sc->rxslot[slot].cur = sc->rxslot[slot].start;
+
+#ifdef EN_DEBUG
+ printf("%s: rx%d: assigned to VCI %d\n", sc->sc_dev.dv_xname, slot, vc);
+#endif
+}
+
+
+/*
+ * en_start: start transmitting the next packet that needs to go out
+ * if there is one. note that atm_output() has already splimp()'d us.
+ */
+
+STATIC void en_start(ifp)
+
+struct ifnet *ifp;
+
+{
+#ifdef MISSING_IF_SOFTC
+ struct en_softc *sc = (struct en_softc *) en_cd.cd_devs[ifp->if_unit];
+#else
+ struct en_softc *sc = (struct en_softc *) ifp->if_softc;
+#endif
+ struct ifqueue *ifq = &ifp->if_snd; /* if INPUT QUEUE */
+ struct mbuf *m, *lastm, *prev;
+ struct atm_pseudohdr *ap, *new_ap;
+ int txchan, mlen, got, need, toadd, cellcnt, first;
+ u_int32_t atm_vpi, atm_vci, atm_flags, *dat, aal;
+ u_int8_t *cp;
+
+ if ((ifp->if_flags & IFF_RUNNING) == 0)
+ return;
+
+ /*
+ * remove everything from interface queue since we handle all queueing
+ * locally ...
+ */
+
+ while (1) {
+
+ IF_DEQUEUE(ifq, m);
+ if (m == NULL)
+ return; /* EMPTY: >>> exit here <<< */
+
+ /*
+ * calculate size of packet (in bytes)
+ * also, if we are not doing transmit DMA we eliminate all stupid
+ * (non-word) alignments here using en_mfix(). calls to en_mfix()
+ * seem to be due to tcp retransmits for the most part.
+ *
+ * after this loop mlen total length of mbuf chain (including atm_ph),
+ * and lastm is a pointer to the last mbuf on the chain.
+ */
+
+ lastm = m;
+ mlen = 0;
+ prev = NULL;
+ while (1) {
+#ifdef EN_FIXMBUF
+ /* if eni, always fix misaligned mbuf */
+ if (!sc->is_adaptec || EN_NOTXDMA || !en_dma) {
+#else
+ if (EN_NOTXDMA || !en_dma) { /* no DMA? */
+#endif
+ if ( (mtod(lastm, unsigned long) % sizeof(u_int32_t)) != 0 ||
+ ((lastm->m_len % sizeof(u_int32_t)) != 0 && lastm->m_next)) {
+ first = (lastm == m);
+ if (en_mfix(sc, &lastm, prev) == 0) { /* failed? */
+ m_freem(m);
+ m = NULL;
+ break;
+ }
+ if (first)
+ m = lastm; /* update */
+ }
+ prev = lastm;
+ }
+ mlen += lastm->m_len;
+ if (lastm->m_next == NULL)
+ break;
+ lastm = lastm->m_next;
+ }
+
+ if (m == NULL) /* happens only if mfix fails */
+ continue;
+
+ ap = mtod(m, struct atm_pseudohdr *);
+
+ atm_vpi = ATM_PH_VPI(ap);
+ atm_vci = ATM_PH_VCI(ap);
+ atm_flags = ATM_PH_FLAGS(ap) & ~(EN_OBHDR|EN_OBTRL);
+ aal = ((atm_flags & ATM_PH_AAL5) != 0)
+ ? MID_TBD_AAL5 : MID_TBD_NOAAL5;
+
+ /*
+ * check that vpi/vci is one we can use
+ */
+
+ if (atm_vpi || atm_vci > MID_N_VC) {
+ printf("%s: output vpi=%d, vci=%d out of card range, dropping...\n",
+ sc->sc_dev.dv_xname, atm_vpi, atm_vci);
+ m_freem(m);
+ continue;
+ }
+
+ /*
+ * computing how much padding we need on the end of the mbuf, then
+ * see if we can put the TBD at the front of the mbuf where the
+ * link header goes (well behaved protocols will reserve room for us).
+ * last, check if room for PDU tail.
+ *
+ * got = number of bytes of data we have
+ * cellcnt = number of cells in this mbuf
+ * need = number of bytes of data + padding we need (excludes TBD)
+ * toadd = number of bytes of data we need to add to end of mbuf,
+ * [including AAL5 PDU, if AAL5]
+ */
+
+ got = mlen - sizeof(struct atm_pseudohdr *);
+ toadd = (aal == MID_TBD_AAL5) ? MID_PDU_SIZE : 0; /* PDU */
+ cellcnt = (got + toadd + (MID_ATMDATASZ - 1)) / MID_ATMDATASZ;
+ need = cellcnt * MID_ATMDATASZ;
+ toadd = need - got; /* recompute, including zero padding */
+
+#ifdef EN_DEBUG
+ printf("%s: txvci%d: mlen=%d, got=%d, need=%d, toadd=%d, cell#=%d\n",
+ sc->sc_dev.dv_xname, atm_vci, mlen, got, need, toadd, cellcnt);
+ printf(" leading_space=%d, trailing_space=%d\n",
+ M_LEADINGSPACE(m), M_TRAILINGSPACE(lastm));
+#endif
+
+#ifdef EN_MBUF_OPT
+
+ /*
+ * note: external storage (M_EXT) can be shared between mbufs
+ * to avoid copying (see m_copym()). this means that the same
+ * data buffer could be shared by several mbufs, and thus it isn't
+ * a good idea to try and write TBDs or PDUs to M_EXT data areas.
+ */
+
+ if (M_LEADINGSPACE(m) >= MID_TBD_SIZE && (m->m_flags & M_EXT) == 0) {
+ m->m_data -= MID_TBD_SIZE;
+ m->m_len += MID_TBD_SIZE;
+ mlen += MID_TBD_SIZE;
+ new_ap = mtod(m, struct atm_pseudohdr *);
+ *new_ap = *ap; /* move it back */
+ ap = new_ap;
+ dat = ((u_int32_t *) ap) + 1;
+ /* make sure the TBD is in proper byte order */
+ *dat++ = htonl(MID_TBD_MK1(aal, sc->txspeed[atm_vci], cellcnt));
+ *dat = htonl(MID_TBD_MK2(atm_vci, 0, 0));
+ atm_flags |= EN_OBHDR;
+ }
+
+ if (toadd && (lastm->m_flags & M_EXT) == 0 &&
+ M_TRAILINGSPACE(lastm) >= toadd) {
+ cp = mtod(lastm, u_int8_t *) + lastm->m_len;
+ lastm->m_len += toadd;
+ mlen += toadd;
+ if (aal == MID_TBD_AAL5) {
+ bzero(cp, toadd - MID_PDU_SIZE);
+ dat = (u_int32_t *)(cp + toadd - MID_PDU_SIZE);
+ /* make sure the PDU is in proper byte order */
+ *dat = htonl(MID_PDU_MK1(0, 0, got));
+ } else {
+ bzero(cp, toadd);
+ }
+ atm_flags |= EN_OBTRL;
+ }
+ ATM_PH_FLAGS(ap) = atm_flags; /* update EN_OBHDR/EN_OBTRL bits */
+#endif /* EN_MBUF_OPT */
+
+ /*
+ * get assigned channel (will be zero unless txspeed[atm_vci] is set)
+ */
+
+ txchan = sc->txvc2slot[atm_vci];
+
+ if (sc->txslot[txchan].mbsize > EN_TXHIWAT) {
+ EN_COUNT(sc->txmbovr);
+ m_freem(m);
+#ifdef EN_DEBUG
+ printf("%s: tx%d: buffer space shortage\n", sc->sc_dev.dv_xname,
+ txchan);
+#endif
+ continue;
+ }
+
+ sc->txslot[txchan].mbsize += mlen;
+
+#ifdef EN_DEBUG
+ printf("%s: tx%d: VPI=%d, VCI=%d, FLAGS=0x%x, speed=0x%x\n",
+ sc->sc_dev.dv_xname, txchan, atm_vpi, atm_vci, atm_flags,
+ sc->txspeed[atm_vci]);
+ printf(" adjusted mlen=%d, mbsize=%d\n", mlen,
+ sc->txslot[txchan].mbsize);
+#endif
+
+ IF_ENQUEUE(&sc->txslot[txchan].q, m);
+ en_txdma(sc, txchan);
+
+ }
+ /*NOTREACHED*/
+}
+
+
+/*
+ * en_mfix: fix a stupid mbuf
+ */
+STATIC int en_makeexclusive(struct en_softc *, struct mbuf **, struct mbuf *);
+
+STATIC int en_makeexclusive(sc, mm, prev)
+ struct en_softc *sc;
+ struct mbuf **mm, *prev;
+{
+ struct mbuf *m, *new;
+
+ m = *mm;
+
+ if (m->m_flags & M_EXT) {
+ if (m->m_ext.ext_free) {
+ /* external buffer isn't an ordinary mbuf cluster! */
+ printf("%s: mfix: special buffer! can't make a copy!\n",
+ sc->sc_dev.dv_xname);
+ return (0);
+ }
+
+ if (mclrefcnt[mtocl(m->m_ext.ext_buf)] > 1) {
+ /* make a real copy of the M_EXT mbuf since it is shared */
+ MGET(new, M_DONTWAIT, MT_DATA);
+ if (!new) {
+ EN_COUNT(sc->mfixfail);
+ return(0);
+ }
+ if (m->m_flags & M_PKTHDR)
+ M_COPY_PKTHDR(new, m);
+ MCLGET(new, M_DONTWAIT);
+ if ((new->m_flags & M_EXT) == 0) {
+ m_free(new);
+ EN_COUNT(sc->mfixfail);
+ return(0);
+ }
+ bcopy(m->m_data, new->m_data, m->m_len);
+ new->m_len = m->m_len;
+ new->m_next = m->m_next;
+ if (prev)
+ prev->m_next = new;
+ m_free(m);
+ *mm = new;
+ }
+ else {
+ /* the buffer is not shared, align the data offset using
+ this buffer. */
+ u_char *d = mtod(m, u_char *);
+ int off = ((u_long)d) % sizeof(u_int32_t);
+
+ if (off > 0) {
+ bcopy(d, d - off, m->m_len);
+ m->m_data = (caddr_t)d - off;
+ }
+ }
+ }
+ return (1);
+}
+
+STATIC int en_mfix(sc, mm, prev)
+
+struct en_softc *sc;
+struct mbuf **mm, *prev;
+
+{
+ struct mbuf *m;
+ u_char *d, *cp;
+ int off;
+ struct mbuf *nxt;
+
+ m = *mm;
+
+ EN_COUNT(sc->mfix); /* count # of calls */
+#ifdef EN_DEBUG
+ printf("%s: mfix mbuf m_data=0x%x, m_len=%d\n", sc->sc_dev.dv_xname,
+ m->m_data, m->m_len);
+#endif
+
+ d = mtod(m, u_char *);
+ off = ((unsigned long) d) % sizeof(u_int32_t);
+
+ if (off) {
+ if ((m->m_flags & M_EXT) == 0) {
+ bcopy(d, d - off, m->m_len); /* ALIGN! (with costly data copy...) */
+ d -= off;
+ m->m_data = (caddr_t)d;
+ } else {
+ /* can't write to an M_EXT mbuf since it may be shared */
+ if (en_makeexclusive(sc, &m, prev) == 0)
+ return (0);
+ *mm = m; /* note: 'd' now invalid */
+ }
+ }
+
+ off = m->m_len % sizeof(u_int32_t);
+ if (off == 0)
+ return(1);
+
+ if (m->m_flags & M_EXT) {
+ /* can't write to an M_EXT mbuf since it may be shared */
+ if (en_makeexclusive(sc, &m, prev) == 0)
+ return (0);
+ *mm = m; /* note: 'd' now invalid */
+ }
+
+ d = mtod(m, u_char *) + m->m_len;
+ off = sizeof(u_int32_t) - off;
+
+ nxt = m->m_next;
+ while (off--) {
+ if (nxt != NULL && nxt->m_len == 0) {
+ /* remove an empty mbuf. this avoids odd byte padding to an empty
+ last mbuf. */
+ m->m_next = nxt = m_free(nxt);
+ }
+ if (nxt == NULL) { /* out of data, zero fill */
+ *d++ = 0;
+ continue; /* next "off" */
+ }
+ cp = mtod(nxt, u_char *);
+ *d++ = *cp++;
+ m->m_len++;
+ nxt->m_len--;
+ nxt->m_data = (caddr_t)cp;
+ }
+ if (nxt != NULL && nxt->m_len == 0)
+ m->m_next = m_free(nxt);
+ return(1);
+}
+
+
+/*
+ * en_txdma: start trasmit DMA, if possible
+ */
+
+STATIC void en_txdma(sc, chan)
+
+struct en_softc *sc;
+int chan;
+
+{
+ struct mbuf *tmp;
+ struct atm_pseudohdr *ap;
+ struct en_launch launch;
+ int datalen = 0, dtqneed, len, ncells;
+ u_int8_t *cp;
+
+#ifdef EN_DEBUG
+ printf("%s: tx%d: starting...\n", sc->sc_dev.dv_xname, chan);
+#endif
+
+ /*
+ * note: now that txlaunch handles non-word aligned/sized requests
+ * the only time you can safely set launch.nodma is if you've en_mfix()'d
+ * the mbuf chain. this happens only if EN_NOTXDMA || !en_dma.
+ */
+
+ launch.nodma = (EN_NOTXDMA || !en_dma);
+
+again:
+
+ /*
+ * get an mbuf waiting for DMA
+ */
+
+ launch.t = sc->txslot[chan].q.ifq_head; /* peek at head of queue */
+
+ if (launch.t == NULL) {
+#ifdef EN_DEBUG
+ printf("%s: tx%d: ...done!\n", sc->sc_dev.dv_xname, chan);
+#endif
+ return; /* >>> exit here if no data waiting for DMA <<< */
+ }
+
+ /*
+ * get flags, vci
+ *
+ * note: launch.need = # bytes we need to get on the card
+ * dtqneed = # of DTQs we need for this packet
+ * launch.mlen = # of bytes in in mbuf chain (<= launch.need)
+ */
+
+ ap = mtod(launch.t, struct atm_pseudohdr *);
+ launch.atm_vci = ATM_PH_VCI(ap);
+ launch.atm_flags = ATM_PH_FLAGS(ap);
+ launch.aal = ((launch.atm_flags & ATM_PH_AAL5) != 0) ?
+ MID_TBD_AAL5 : MID_TBD_NOAAL5;
+
+ /*
+ * XXX: have to recompute the length again, even though we already did
+ * it in en_start(). might as well compute dtqneed here as well, so
+ * this isn't that bad.
+ */
+
+ if ((launch.atm_flags & EN_OBHDR) == 0) {
+ dtqneed = 1; /* header still needs to be added */
+ launch.need = MID_TBD_SIZE; /* not includeded with mbuf */
+ } else {
+ dtqneed = 0; /* header on-board, dma with mbuf */
+ launch.need = 0;
+ }
+
+ launch.mlen = 0;
+ for (tmp = launch.t ; tmp != NULL ; tmp = tmp->m_next) {
+ len = tmp->m_len;
+ launch.mlen += len;
+ cp = mtod(tmp, u_int8_t *);
+ if (tmp == launch.t) {
+ len -= sizeof(struct atm_pseudohdr); /* don't count this! */
+ cp += sizeof(struct atm_pseudohdr);
+ }
+ launch.need += len;
+ if (len == 0)
+ continue; /* atm_pseudohdr alone in first mbuf */
+
+ dtqneed += en_dqneed(sc, (caddr_t) cp, len, 1);
+ }
+
+ if ((launch.need % sizeof(u_int32_t)) != 0)
+ dtqneed++; /* need DTQ to FLUSH internal buffer */
+
+ if ((launch.atm_flags & EN_OBTRL) == 0) {
+ if (launch.aal == MID_TBD_AAL5) {
+ datalen = launch.need - MID_TBD_SIZE;
+ launch.need += MID_PDU_SIZE; /* AAL5: need PDU tail */
+ }
+ dtqneed++; /* need to work on the end a bit */
+ }
+
+ /*
+ * finish calculation of launch.need (need to figure out how much padding
+ * we will need). launch.need includes MID_TBD_SIZE, but we need to
+ * remove that to so we can round off properly. we have to add
+ * MID_TBD_SIZE back in after calculating ncells.
+ */
+
+ launch.need = roundup(launch.need - MID_TBD_SIZE, MID_ATMDATASZ);
+ ncells = launch.need / MID_ATMDATASZ;
+ launch.need += MID_TBD_SIZE;
+
+ if (launch.need > EN_TXSZ * 1024) {
+ printf("%s: tx%d: packet larger than xmit buffer (%d > %d)\n",
+ sc->sc_dev.dv_xname, chan, launch.need, EN_TXSZ * 1024);
+ goto dequeue_drop;
+ }
+
+ if (launch.need > sc->txslot[chan].bfree) {
+ EN_COUNT(sc->txoutspace);
+#ifdef EN_DEBUG
+ printf("%s: tx%d: out of transmit space\n", sc->sc_dev.dv_xname, chan);
+#endif
+ return; /* >>> exit here if out of obmem buffer space <<< */
+ }
+
+ /*
+ * ensure we have enough dtqs to go, if not, wait for more.
+ */
+
+ if (launch.nodma) {
+ dtqneed = 1;
+ }
+ if (dtqneed > sc->dtq_free) {
+ sc->need_dtqs = 1;
+ EN_COUNT(sc->txdtqout);
+#ifdef EN_DEBUG
+ printf("%s: tx%d: out of transmit DTQs\n", sc->sc_dev.dv_xname, chan);
+#endif
+ return; /* >>> exit here if out of dtqs <<< */
+ }
+
+ /*
+ * it is a go, commit! dequeue mbuf start working on the xfer.
+ */
+
+ IF_DEQUEUE(&sc->txslot[chan].q, tmp);
+#ifdef EN_DIAG
+ if (launch.t != tmp)
+ panic("en dequeue");
+#endif /* EN_DIAG */
+
+ /*
+ * launch!
+ */
+
+ EN_COUNT(sc->launch);
+ sc->enif.if_opackets++;
+ if ((launch.atm_flags & EN_OBHDR) == 0) {
+ EN_COUNT(sc->lheader);
+ /* store tbd1/tbd2 in host byte order */
+ launch.tbd1 = MID_TBD_MK1(launch.aal, sc->txspeed[launch.atm_vci], ncells);
+ launch.tbd2 = MID_TBD_MK2(launch.atm_vci, 0, 0);
+ }
+ if ((launch.atm_flags & EN_OBTRL) == 0 && launch.aal == MID_TBD_AAL5) {
+ EN_COUNT(sc->ltail);
+ launch.pdu1 = MID_PDU_MK1(0, 0, datalen); /* host byte order */
+ }
+
+ en_txlaunch(sc, chan, &launch);
+
+ /*
+ * do some housekeeping and get the next packet
+ */
+
+ sc->txslot[chan].bfree -= launch.need;
+ IF_ENQUEUE(&sc->txslot[chan].indma, launch.t);
+ goto again;
+
+ /*
+ * END of txdma loop!
+ */
+
+ /*
+ * error handles
+ */
+
+dequeue_drop:
+ IF_DEQUEUE(&sc->txslot[chan].q, tmp);
+ if (launch.t != tmp)
+ panic("en dequeue drop");
+ m_freem(launch.t);
+ sc->txslot[chan].mbsize -= launch.mlen;
+ goto again;
+}
+
+
+/*
+ * en_txlaunch: launch an mbuf into the dma pool!
+ */
+
+STATIC void en_txlaunch(sc, chan, l)
+
+struct en_softc *sc;
+int chan;
+struct en_launch *l;
+
+{
+ struct mbuf *tmp;
+ u_int32_t cur = sc->txslot[chan].cur,
+ start = sc->txslot[chan].start,
+ stop = sc->txslot[chan].stop,
+ dma, *data, *datastop, count, bcode;
+ int pad, addtail, need, len, needalign, cnt, end, mx;
+
+
+ /*
+ * vars:
+ * need = # bytes card still needs (decr. to zero)
+ * len = # of bytes left in current mbuf
+ * cur = our current pointer
+ * dma = last place we programmed into the DMA
+ * data = pointer into data area of mbuf that needs to go next
+ * cnt = # of bytes to transfer in this DTQ
+ * bcode/count = DMA burst code, and chip's version of cnt
+ *
+ * a single buffer can require up to 5 DTQs depending on its size
+ * and alignment requirements. the 5 possible requests are:
+ * [1] 1, 2, or 3 byte DMA to align src data pointer to word boundary
+ * [2] alburst DMA to align src data pointer to bestburstlen
+ * [3] 1 or more bestburstlen DMAs
+ * [4] clean up burst (to last word boundary)
+ * [5] 1, 2, or 3 byte final clean up DMA
+ */
+
+ need = l->need;
+ dma = cur;
+ addtail = (l->atm_flags & EN_OBTRL) == 0; /* add a tail? */
+
+#ifdef EN_DIAG
+ if ((need - MID_TBD_SIZE) % MID_ATMDATASZ)
+ printf("%s: tx%d: bogus trasmit needs (%d)\n", sc->sc_dev.dv_xname, chan,
+ need);
+#endif
+#ifdef EN_DEBUG
+ printf("%s: tx%d: launch mbuf %p! cur=0x%x[%d], need=%d, addtail=%d\n",
+ sc->sc_dev.dv_xname, chan, l->t, cur, (cur-start)/4, need, addtail);
+ count = EN_READ(sc, MIDX_PLACE(chan));
+ printf(" HW: base_address=0x%x, size=%d, read=%d, descstart=%d\n",
+ MIDX_BASE(count), MIDX_SZ(count), EN_READ(sc, MIDX_READPTR(chan)),
+ EN_READ(sc, MIDX_DESCSTART(chan)));
+#endif
+
+ /*
+ * do we need to insert the TBD by hand?
+ * note that tbd1/tbd2/pdu1 are in host byte order.
+ */
+
+ if ((l->atm_flags & EN_OBHDR) == 0) {
+#ifdef EN_DEBUG
+ printf("%s: tx%d: insert header 0x%x 0x%x\n", sc->sc_dev.dv_xname,
+ chan, l->tbd1, l->tbd2);
+#endif
+ EN_WRITE(sc, cur, l->tbd1);
+ EN_WRAPADD(start, stop, cur, 4);
+ EN_WRITE(sc, cur, l->tbd2);
+ EN_WRAPADD(start, stop, cur, 4);
+ need -= 8;
+ }
+
+ /*
+ * now do the mbufs...
+ */
+
+ for (tmp = l->t ; tmp != NULL ; tmp = tmp->m_next) {
+
+ /* get pointer to data and length */
+ data = mtod(tmp, u_int32_t *);
+ len = tmp->m_len;
+ if (tmp == l->t) {
+ data += sizeof(struct atm_pseudohdr)/sizeof(u_int32_t);
+ len -= sizeof(struct atm_pseudohdr);
+ }
+
+ /* now, determine if we should copy it */
+ if (l->nodma || (len < EN_MINDMA &&
+ (len % 4) == 0 && ((unsigned long) data % 4) == 0 && (cur % 4) == 0)) {
+
+ /*
+ * roundup len: the only time this will change the value of len
+ * is when l->nodma is true, tmp is the last mbuf, and there is
+ * a non-word number of bytes to transmit. in this case it is
+ * safe to round up because we've en_mfix'd the mbuf (so the first
+ * byte is word aligned there must be enough free bytes at the end
+ * to round off to the next word boundary)...
+ */
+ len = roundup(len, sizeof(u_int32_t));
+ datastop = data + (len / sizeof(u_int32_t));
+ /* copy loop: preserve byte order!!! use WRITEDAT */
+ while (data != datastop) {
+ EN_WRITEDAT(sc, cur, *data);
+ data++;
+ EN_WRAPADD(start, stop, cur, 4);
+ }
+ need -= len;
+#ifdef EN_DEBUG
+ printf("%s: tx%d: copied %d bytes (%d left, cur now 0x%x)\n",
+ sc->sc_dev.dv_xname, chan, len, need, cur);
+#endif
+ continue; /* continue on to next mbuf */
+ }
+
+ /* going to do DMA, first make sure the dtq is in sync. */
+ if (dma != cur) {
+ EN_DTQADD(sc, WORD_IDX(start,cur), chan, MIDDMA_JK, 0, 0, 0);
+#ifdef EN_DEBUG
+ printf("%s: tx%d: dtq_sync: advance pointer to %d\n",
+ sc->sc_dev.dv_xname, chan, cur);
+#endif
+ }
+
+ /*
+ * if this is the last buffer, and it looks like we are going to need to
+ * flush the internal buffer, can we extend the length of this mbuf to
+ * avoid the FLUSH?
+ */
+
+ if (tmp->m_next == NULL) {
+ cnt = (need - len) % sizeof(u_int32_t);
+ if (cnt && M_TRAILINGSPACE(tmp) >= cnt)
+ len += cnt; /* pad for FLUSH */
+ }
+
+#if !defined(MIDWAY_ENIONLY)
+
+ /*
+ * the adaptec DMA engine is smart and handles everything for us.
+ */
+
+ if (sc->is_adaptec) {
+ /* need to DMA "len" bytes out to card */
+ need -= len;
+ EN_WRAPADD(start, stop, cur, len);
+#ifdef EN_DEBUG
+ printf("%s: tx%d: adp_dma %d bytes (%d left, cur now 0x%x)\n",
+ sc->sc_dev.dv_xname, chan, len, need, cur);
+#endif
+ end = (need == 0) ? MID_DMA_END : 0;
+ EN_DTQADD(sc, len, chan, 0, vtophys(data), l->mlen, end);
+ if (end)
+ goto done;
+ dma = cur; /* update dma pointer */
+ continue;
+ }
+#endif /* !MIDWAY_ENIONLY */
+
+#if !defined(MIDWAY_ADPONLY)
+
+ /*
+ * the ENI DMA engine is not so smart and need more help from us
+ */
+
+ /* do we need to do a DMA op to align to word boundary? */
+ needalign = (unsigned long) data % sizeof(u_int32_t);
+ if (needalign) {
+ EN_COUNT(sc->headbyte);
+ cnt = sizeof(u_int32_t) - needalign;
+ if (cnt == 2 && len >= cnt) {
+ count = 1;
+ bcode = MIDDMA_2BYTE;
+ } else {
+ cnt = min(cnt, len); /* prevent overflow */
+ count = cnt;
+ bcode = MIDDMA_BYTE;
+ }
+ need -= cnt;
+ EN_WRAPADD(start, stop, cur, cnt);
+#ifdef EN_DEBUG
+ printf("%s: tx%d: small al_dma %d bytes (%d left, cur now 0x%x)\n",
+ sc->sc_dev.dv_xname, chan, cnt, need, cur);
+#endif
+ len -= cnt;
+ end = (need == 0) ? MID_DMA_END : 0;
+ EN_DTQADD(sc, count, chan, bcode, vtophys(data), l->mlen, end);
+ if (end)
+ goto done;
+ data = (u_int32_t *) ((u_char *)data + cnt);
+ }
+
+ /* do we need to do a DMA op to align? */
+ if (sc->alburst &&
+ (needalign = (((unsigned long) data) & sc->bestburstmask)) != 0
+ && len >= sizeof(u_int32_t)) {
+ cnt = sc->bestburstlen - needalign;
+ mx = len & ~(sizeof(u_int32_t)-1); /* don't go past end */
+ if (cnt > mx) {
+ cnt = mx;
+ count = cnt / sizeof(u_int32_t);
+ bcode = MIDDMA_WORD;
+ } else {
+ count = cnt / sizeof(u_int32_t);
+ bcode = en_dmaplan[count].bcode;
+ count = cnt >> en_dmaplan[count].divshift;
+ }
+ need -= cnt;
+ EN_WRAPADD(start, stop, cur, cnt);
+#ifdef EN_DEBUG
+ printf("%s: tx%d: al_dma %d bytes (%d left, cur now 0x%x)\n",
+ sc->sc_dev.dv_xname, chan, cnt, need, cur);
+#endif
+ len -= cnt;
+ end = (need == 0) ? MID_DMA_END : 0;
+ EN_DTQADD(sc, count, chan, bcode, vtophys(data), l->mlen, end);
+ if (end)
+ goto done;
+ data = (u_int32_t *) ((u_char *)data + cnt);
+ }
+
+ /* do we need to do a max-sized burst? */
+ if (len >= sc->bestburstlen) {
+ count = len >> sc->bestburstshift;
+ cnt = count << sc->bestburstshift;
+ bcode = sc->bestburstcode;
+ need -= cnt;
+ EN_WRAPADD(start, stop, cur, cnt);
+#ifdef EN_DEBUG
+ printf("%s: tx%d: best_dma %d bytes (%d left, cur now 0x%x)\n",
+ sc->sc_dev.dv_xname, chan, cnt, need, cur);
+#endif
+ len -= cnt;
+ end = (need == 0) ? MID_DMA_END : 0;
+ EN_DTQADD(sc, count, chan, bcode, vtophys(data), l->mlen, end);
+ if (end)
+ goto done;
+ data = (u_int32_t *) ((u_char *)data + cnt);
+ }
+
+ /* do we need to do a cleanup burst? */
+ cnt = len & ~(sizeof(u_int32_t)-1);
+ if (cnt) {
+ count = cnt / sizeof(u_int32_t);
+ bcode = en_dmaplan[count].bcode;
+ count = cnt >> en_dmaplan[count].divshift;
+ need -= cnt;
+ EN_WRAPADD(start, stop, cur, cnt);
+#ifdef EN_DEBUG
+ printf("%s: tx%d: cleanup_dma %d bytes (%d left, cur now 0x%x)\n",
+ sc->sc_dev.dv_xname, chan, cnt, need, cur);
+#endif
+ len -= cnt;
+ end = (need == 0) ? MID_DMA_END : 0;
+ EN_DTQADD(sc, count, chan, bcode, vtophys(data), l->mlen, end);
+ if (end)
+ goto done;
+ data = (u_int32_t *) ((u_char *)data + cnt);
+ }
+
+ /* any word fragments left? */
+ if (len) {
+ EN_COUNT(sc->tailbyte);
+ if (len == 2) {
+ count = 1;
+ bcode = MIDDMA_2BYTE; /* use 2byte mode */
+ } else {
+ count = len;
+ bcode = MIDDMA_BYTE; /* use 1 byte mode */
+ }
+ need -= len;
+ EN_WRAPADD(start, stop, cur, len);
+#ifdef EN_DEBUG
+ printf("%s: tx%d: byte cleanup_dma %d bytes (%d left, cur now 0x%x)\n",
+ sc->sc_dev.dv_xname, chan, len, need, cur);
+#endif
+ end = (need == 0) ? MID_DMA_END : 0;
+ EN_DTQADD(sc, count, chan, bcode, vtophys(data), l->mlen, end);
+ if (end)
+ goto done;
+ }
+
+ dma = cur; /* update dma pointer */
+#endif /* !MIDWAY_ADPONLY */
+
+ } /* next mbuf, please */
+
+ /*
+ * all mbuf data has been copied out to the obmem (or set up to be DMAd).
+ * if the trailer or padding needs to be put in, do it now.
+ *
+ * NOTE: experimental results reveal the following fact:
+ * if you DMA "X" bytes to the card, where X is not a multiple of 4,
+ * then the card will internally buffer the last (X % 4) bytes (in
+ * hopes of getting (4 - (X % 4)) more bytes to make a complete word).
+ * it is imporant to make sure we don't leave any important data in
+ * this internal buffer because it is discarded on the last (end) DTQ.
+ * one way to do this is to DMA in (4 - (X % 4)) more bytes to flush
+ * the darn thing out.
+ */
+
+ if (addtail) {
+
+ pad = need % sizeof(u_int32_t);
+ if (pad) {
+ /*
+ * FLUSH internal data buffer. pad out with random data from the front
+ * of the mbuf chain...
+ */
+ bcode = (sc->is_adaptec) ? 0 : MIDDMA_BYTE;
+ EN_COUNT(sc->tailflush);
+ EN_WRAPADD(start, stop, cur, pad);
+ EN_DTQADD(sc, pad, chan, bcode, vtophys(l->t->m_data), 0, 0);
+ need -= pad;
+#ifdef EN_DEBUG
+ printf("%s: tx%d: pad/FLUSH dma %d bytes (%d left, cur now 0x%x)\n",
+ sc->sc_dev.dv_xname, chan, pad, need, cur);
+#endif
+ }
+
+ /* copy data */
+ pad = need / sizeof(u_int32_t); /* round *down* */
+ if (l->aal == MID_TBD_AAL5)
+ pad -= 2;
+#ifdef EN_DEBUG
+ printf("%s: tx%d: padding %d bytes (cur now 0x%x)\n",
+ sc->sc_dev.dv_xname, chan, pad * sizeof(u_int32_t), cur);
+#endif
+ while (pad--) {
+ EN_WRITEDAT(sc, cur, 0); /* no byte order issues with zero */
+ EN_WRAPADD(start, stop, cur, 4);
+ }
+ if (l->aal == MID_TBD_AAL5) {
+ EN_WRITE(sc, cur, l->pdu1); /* in host byte order */
+ EN_WRAPADD(start, stop, cur, 8);
+ }
+ }
+
+ if (addtail || dma != cur) {
+ /* write final descritor */
+ EN_DTQADD(sc, WORD_IDX(start,cur), chan, MIDDMA_JK, 0,
+ l->mlen, MID_DMA_END);
+ /* dma = cur; */ /* not necessary since we are done */
+ }
+
+done:
+ /* update current pointer */
+ sc->txslot[chan].cur = cur;
+#ifdef EN_DEBUG
+ printf("%s: tx%d: DONE! cur now = 0x%x\n",
+ sc->sc_dev.dv_xname, chan, cur);
+#endif
+
+ return;
+}
+
+
+/*
+ * interrupt handler
+ */
+
+EN_INTR_TYPE en_intr(arg)
+
+void *arg;
+
+{
+ struct en_softc *sc = (struct en_softc *) arg;
+ struct mbuf *m;
+ struct atm_pseudohdr ah;
+ u_int32_t reg, kick, val, mask, chip, vci, slot, dtq, drq;
+ int lcv, idx, need_softserv = 0;
+
+ reg = EN_READ(sc, MID_INTACK);
+
+ if ((reg & MID_INT_ANY) == 0)
+ EN_INTR_RET(0); /* not us */
+
+#ifdef EN_DEBUG
+ printf("%s: interrupt=0x%b\n", sc->sc_dev.dv_xname, reg, MID_INTBITS);
+#endif
+
+ /*
+ * unexpected errors that need a reset
+ */
+
+ if ((reg & (MID_INT_IDENT|MID_INT_LERR|MID_INT_DMA_ERR|MID_INT_SUNI)) != 0) {
+ printf("%s: unexpected interrupt=0x%b, resetting card\n",
+ sc->sc_dev.dv_xname, reg, MID_INTBITS);
+#ifdef EN_DEBUG
+#ifdef DDB
+ Debugger();
+#endif /* DDB */
+ sc->enif.if_flags &= ~IFF_RUNNING; /* FREEZE! */
+#else
+ en_reset(sc);
+ en_init(sc);
+#endif
+ EN_INTR_RET(1); /* for us */
+ }
+
+ /*******************
+ * xmit interrupts *
+ ******************/
+
+ kick = 0; /* bitmask of channels to kick */
+ if (reg & MID_INT_TX) { /* TX done! */
+
+ /*
+ * check for tx complete, if detected then this means that some space
+ * has come free on the card. we must account for it and arrange to
+ * kick the channel to life (in case it is stalled waiting on the card).
+ */
+ for (mask = 1, lcv = 0 ; lcv < EN_NTX ; lcv++, mask = mask * 2) {
+ if (reg & MID_TXCHAN(lcv)) {
+ kick = kick | mask; /* want to kick later */
+ val = EN_READ(sc, MIDX_READPTR(lcv)); /* current read pointer */
+ val = (val * sizeof(u_int32_t)) + sc->txslot[lcv].start;
+ /* convert to offset */
+ if (val > sc->txslot[lcv].cur)
+ sc->txslot[lcv].bfree = val - sc->txslot[lcv].cur;
+ else
+ sc->txslot[lcv].bfree = (val + (EN_TXSZ*1024)) - sc->txslot[lcv].cur;
+#ifdef EN_DEBUG
+ printf("%s: tx%d: trasmit done. %d bytes now free in buffer\n",
+ sc->sc_dev.dv_xname, lcv, sc->txslot[lcv].bfree);
+#endif
+ }
+ }
+ }
+
+ if (reg & MID_INT_DMA_TX) { /* TX DMA done! */
+
+ /*
+ * check for TX DMA complete, if detected then this means that some DTQs
+ * are now free. it also means some indma mbufs can be freed.
+ * if we needed DTQs, kick all channels.
+ */
+ val = EN_READ(sc, MID_DMA_RDTX); /* chip's current location */
+ idx = MID_DTQ_A2REG(sc->dtq_chip);/* where we last saw chip */
+ if (sc->need_dtqs) {
+ kick = MID_NTX_CH - 1; /* assume power of 2, kick all! */
+ sc->need_dtqs = 0; /* recalculated in "kick" loop below */
+#ifdef EN_DEBUG
+ printf("%s: cleared need DTQ condition\n", sc->sc_dev.dv_xname);
+#endif
+ }
+ while (idx != val) {
+ sc->dtq_free++;
+ if ((dtq = sc->dtq[idx]) != 0) {
+ sc->dtq[idx] = 0; /* don't forget to zero it out when done */
+ slot = EN_DQ_SLOT(dtq);
+ IF_DEQUEUE(&sc->txslot[slot].indma, m);
+ if (!m) panic("enintr: dtqsync");
+ sc->txslot[slot].mbsize -= EN_DQ_LEN(dtq);
+#ifdef EN_DEBUG
+ printf("%s: tx%d: free %d dma bytes, mbsize now %d\n",
+ sc->sc_dev.dv_xname, slot, EN_DQ_LEN(dtq),
+ sc->txslot[slot].mbsize);
+#endif
+ m_freem(m);
+ }
+ EN_WRAPADD(0, MID_DTQ_N, idx, 1);
+ }
+ sc->dtq_chip = MID_DTQ_REG2A(val); /* sync softc */
+ }
+
+
+ /*
+ * kick xmit channels as needed
+ */
+
+ if (kick) {
+#ifdef EN_DEBUG
+ printf("%s: tx kick mask = 0x%x\n", sc->sc_dev.dv_xname, kick);
+#endif
+ for (mask = 1, lcv = 0 ; lcv < EN_NTX ; lcv++, mask = mask * 2) {
+ if ((kick & mask) && sc->txslot[lcv].q.ifq_head) {
+ en_txdma(sc, lcv); /* kick it! */
+ }
+ } /* for each slot */
+ } /* if kick */
+
+
+ /*******************
+ * recv interrupts *
+ ******************/
+
+ /*
+ * check for RX DMA complete, and pass the data "upstairs"
+ */
+
+ if (reg & MID_INT_DMA_RX) {
+ val = EN_READ(sc, MID_DMA_RDRX); /* chip's current location */
+ idx = MID_DRQ_A2REG(sc->drq_chip);/* where we last saw chip */
+ while (idx != val) {
+ sc->drq_free++;
+ if ((drq = sc->drq[idx]) != 0) {
+ sc->drq[idx] = 0; /* don't forget to zero it out when done */
+ slot = EN_DQ_SLOT(drq);
+ if (EN_DQ_LEN(drq) == 0) { /* "JK" trash DMA? */
+ m = NULL;
+ } else {
+ IF_DEQUEUE(&sc->rxslot[slot].indma, m);
+ if (!m) {
+ printf("%s: lost mbuf in slot %d!\n", sc->sc_dev.dv_xname, slot);
+ panic("enintr: drqsync");
+ }
+ }
+ /* do something with this mbuf */
+ if (sc->rxslot[slot].oth_flags & ENOTHER_DRAIN) { /* drain? */
+ if (m)
+ m_freem(m);
+ vci = sc->rxslot[slot].atm_vci;
+ if (sc->rxslot[slot].indma.ifq_head == NULL &&
+ sc->rxslot[slot].q.ifq_head == NULL &&
+ (EN_READ(sc, MID_VC(vci)) & MIDV_INSERVICE) == 0 &&
+ (sc->rxslot[slot].oth_flags & ENOTHER_SWSL) == 0) {
+ sc->rxslot[slot].oth_flags = ENOTHER_FREE; /* done drain */
+ sc->rxslot[slot].atm_vci = RX_NONE;
+ sc->rxvc2slot[vci] = RX_NONE;
+#ifdef EN_DEBUG
+ printf("%s: rx%d: VCI %d now free\n", sc->sc_dev.dv_xname,
+ slot, vci);
+#endif
+ }
+ } else if (m != NULL) {
+ ATM_PH_FLAGS(&ah) = sc->rxslot[slot].atm_flags;
+ ATM_PH_VPI(&ah) = 0;
+ ATM_PH_SETVCI(&ah, sc->rxslot[slot].atm_vci);
+#ifdef EN_DEBUG
+ printf("%s: rx%d: rxvci%d: atm_input, mbuf %p, len %d, hand %p\n",
+ sc->sc_dev.dv_xname, slot, sc->rxslot[slot].atm_vci, m,
+ EN_DQ_LEN(drq), sc->rxslot[slot].rxhand);
+#endif
+ sc->enif.if_ipackets++;
+
+ atm_input(&sc->enif, &ah, m, sc->rxslot[slot].rxhand);
+ }
+
+ }
+ EN_WRAPADD(0, MID_DRQ_N, idx, 1);
+ }
+ sc->drq_chip = MID_DRQ_REG2A(val); /* sync softc */
+
+ if (sc->need_drqs) { /* true if we had a DRQ shortage */
+ need_softserv = 1;
+ sc->need_drqs = 0;
+#ifdef EN_DEBUG
+ printf("%s: cleared need DRQ condition\n", sc->sc_dev.dv_xname);
+#endif
+ }
+ }
+
+ /*
+ * handle service interrupts
+ */
+
+ if (reg & MID_INT_SERVICE) {
+ chip = MID_SL_REG2A(EN_READ(sc, MID_SERV_WRITE));
+
+ while (sc->hwslistp != chip) {
+
+ /* fetch and remove it from hardware service list */
+ vci = EN_READ(sc, sc->hwslistp);
+ EN_WRAPADD(MID_SLOFF, MID_SLEND, sc->hwslistp, 4);/* advance hw ptr */
+ slot = sc->rxvc2slot[vci];
+ if (slot == RX_NONE) {
+#ifdef EN_DEBUG
+ printf("%s: unexpected rx interrupt on VCI %d\n",
+ sc->sc_dev.dv_xname, vci);
+#endif
+ EN_WRITE(sc, MID_VC(vci), MIDV_TRASH); /* rx off, damn it! */
+ continue; /* next */
+ }
+ EN_WRITE(sc, MID_VC(vci), sc->rxslot[slot].mode); /* remove from hwsl */
+ EN_COUNT(sc->hwpull);
+
+#ifdef EN_DEBUG
+ printf("%s: pulled VCI %d off hwslist\n", sc->sc_dev.dv_xname, vci);
+#endif
+
+ /* add it to the software service list (if needed) */
+ if ((sc->rxslot[slot].oth_flags & ENOTHER_SWSL) == 0) {
+ EN_COUNT(sc->swadd);
+ need_softserv = 1;
+ sc->rxslot[slot].oth_flags |= ENOTHER_SWSL;
+ sc->swslist[sc->swsl_tail] = slot;
+ EN_WRAPADD(0, MID_SL_N, sc->swsl_tail, 1);
+ sc->swsl_size++;
+#ifdef EN_DEBUG
+ printf("%s: added VCI %d to swslist\n", sc->sc_dev.dv_xname, vci);
+#endif
+ }
+ }
+ }
+
+ /*
+ * now service (function too big to include here)
+ */
+
+ if (need_softserv)
+ en_service(sc);
+
+ /*
+ * keep our stats
+ */
+
+ if (reg & MID_INT_DMA_OVR) {
+ EN_COUNT(sc->dmaovr);
+#ifdef EN_DEBUG
+ printf("%s: MID_INT_DMA_OVR\n", sc->sc_dev.dv_xname);
+#endif
+ }
+ reg = EN_READ(sc, MID_STAT);
+#ifdef EN_STAT
+ sc->otrash += MID_OTRASH(reg);
+ sc->vtrash += MID_VTRASH(reg);
+#endif
+
+ EN_INTR_RET(1); /* for us */
+}
+
+
+/*
+ * en_service: handle a service interrupt
+ *
+ * Q: why do we need a software service list?
+ *
+ * A: if we remove a VCI from the hardware list and we find that we are
+ * out of DRQs we must defer processing until some DRQs become free.
+ * so we must remember to look at this RX VCI/slot later, but we can't
+ * put it back on the hardware service list (since that isn't allowed).
+ * so we instead save it on the software service list. it would be nice
+ * if we could peek at the VCI on top of the hwservice list without removing
+ * it, however this leads to a race condition: if we peek at it and
+ * decide we are done with it new data could come in before we have a
+ * chance to remove it from the hwslist. by the time we get it out of
+ * the list the interrupt for the new data will be lost. oops!
+ *
+ */
+
+STATIC void en_service(sc)
+
+struct en_softc *sc;
+
+{
+ struct mbuf *m, *tmp;
+ u_int32_t cur, dstart, rbd, pdu, *sav, dma, bcode, count, *data, *datastop;
+ u_int32_t start, stop, cnt, needalign;
+ int slot, raw, aal5, llc, vci, fill, mlen, tlen, drqneed, need, needfill, end;
+
+ aal5 = 0; /* Silence gcc */
+next_vci:
+ if (sc->swsl_size == 0) {
+#ifdef EN_DEBUG
+ printf("%s: en_service done\n", sc->sc_dev.dv_xname);
+#endif
+ return; /* >>> exit here if swsl now empty <<< */
+ }
+
+ /*
+ * get slot/vci to service
+ */
+
+ slot = sc->swslist[sc->swsl_head];
+ vci = sc->rxslot[slot].atm_vci;
+#ifdef EN_DIAG
+ if (sc->rxvc2slot[vci] != slot) panic("en_service rx slot/vci sync");
+#endif
+
+ /*
+ * determine our mode and if we've got any work to do
+ */
+
+ raw = sc->rxslot[slot].oth_flags & ENOTHER_RAW;
+ start= sc->rxslot[slot].start;
+ stop= sc->rxslot[slot].stop;
+ cur = sc->rxslot[slot].cur;
+
+#ifdef EN_DEBUG
+ printf("%s: rx%d: service vci=%d raw=%d start/stop/cur=0x%x 0x%x 0x%x\n",
+ sc->sc_dev.dv_xname, slot, vci, raw, start, stop, cur);
+#endif
+
+same_vci:
+ dstart = MIDV_DSTART(EN_READ(sc, MID_DST_RP(vci)));
+ dstart = (dstart * sizeof(u_int32_t)) + start;
+
+ /* check to see if there is any data at all */
+ if (dstart == cur) {
+defer: /* defer processing */
+ EN_WRAPADD(0, MID_SL_N, sc->swsl_head, 1);
+ sc->rxslot[slot].oth_flags &= ~ENOTHER_SWSL;
+ sc->swsl_size--;
+ /* >>> remove from swslist <<< */
+#ifdef EN_DEBUG
+ printf("%s: rx%d: remove vci %d from swslist\n",
+ sc->sc_dev.dv_xname, slot, vci);
+#endif
+ goto next_vci;
+ }
+
+ /*
+ * figure out how many bytes we need
+ * [mlen = # bytes to go in mbufs, fill = # bytes to dump (MIDDMA_JK)]
+ */
+
+ if (raw) {
+
+ /* raw mode (aka boodi mode) */
+ fill = 0;
+ if (dstart > cur)
+ mlen = dstart - cur;
+ else
+ mlen = (dstart + (EN_RXSZ*1024)) - cur;
+
+ if (mlen < sc->rxslot[slot].raw_threshold)
+ goto defer; /* too little data to deal with */
+
+ } else {
+
+ /* normal mode */
+ aal5 = (sc->rxslot[slot].atm_flags & ATM_PH_AAL5);
+ llc = (aal5 && (sc->rxslot[slot].atm_flags & ATM_PH_LLCSNAP)) ? 1 : 0;
+ rbd = EN_READ(sc, cur);
+ if (MID_RBD_ID(rbd) != MID_RBD_STDID)
+ panic("en_service: id mismatch\n");
+
+ if (rbd & MID_RBD_T) {
+ mlen = 0; /* we've got trash */
+ fill = MID_RBD_SIZE;
+ EN_COUNT(sc->ttrash);
+ } else if (!aal5) {
+ mlen = MID_RBD_SIZE + MID_CHDR_SIZE + MID_ATMDATASZ; /* 1 cell (ick!) */
+ fill = 0;
+ } else {
+ tlen = (MID_RBD_CNT(rbd) * MID_ATMDATASZ) + MID_RBD_SIZE;
+ pdu = cur + tlen - MID_PDU_SIZE;
+ if (pdu >= stop)
+ pdu -= (EN_RXSZ*1024);
+ pdu = EN_READ(sc, pdu); /* get PDU in correct byte order */
+ fill = tlen - MID_RBD_SIZE - MID_PDU_LEN(pdu);
+ if (fill < 0 || (rbd & MID_RBD_CRCERR) != 0) {
+ printf("%s: invalid AAL5 PDU length or CRC detected, dropping frame\n",
+ sc->sc_dev.dv_xname);
+ printf("%s: got %d cells (%d bytes), AAL5 len is %d bytes (pdu=0x%x) CRCERR=%d\n",
+ sc->sc_dev.dv_xname, MID_RBD_CNT(rbd), tlen - MID_RBD_SIZE,
+ MID_PDU_LEN(pdu), pdu, (rbd & MID_RBD_CRCERR)?1:0);
+ fill = tlen;
+ }
+ mlen = tlen - fill;
+ }
+
+ }
+
+ /*
+ * now allocate mbufs for mlen bytes of data, if out of mbufs, trash all
+ *
+ * notes:
+ * 1. it is possible that we've already allocated an mbuf for this pkt
+ * but ran out of DRQs, in which case we saved the allocated mbuf on
+ * "q".
+ * 2. if we save an mbuf in "q" we store the "cur" (pointer) in the front
+ * of the mbuf as an identity (that we can check later), and we also
+ * store drqneed (so we don't have to recompute it).
+ * 3. after this block of code, if m is still NULL then we ran out of mbufs
+ */
+
+ m = sc->rxslot[slot].q.ifq_head;
+ drqneed = 1;
+ if (m) {
+ sav = mtod(m, u_int32_t *);
+ if (sav[0] != cur) {
+#ifdef EN_DEBUG
+ printf("%s: rx%d: q'ed mbuf %p not ours\n",
+ sc->sc_dev.dv_xname, slot, m);
+#endif
+ m = NULL; /* wasn't ours */
+ EN_COUNT(sc->rxqnotus);
+ } else {
+ EN_COUNT(sc->rxqus);
+ IF_DEQUEUE(&sc->rxslot[slot].q, m);
+ drqneed = sav[1];
+#ifdef EN_DEBUG
+ printf("%s: rx%d: recovered q'ed mbuf %p (drqneed=%d)\n",
+ sc->sc_dev.dv_xname, slot, m, drqneed);
+#endif
+ }
+ }
+
+ if (mlen != 0 && m == NULL) {
+ m = en_mget(sc, mlen, &drqneed); /* allocate! */
+ if (m == NULL) {
+ fill += mlen;
+ mlen = 0;
+ EN_COUNT(sc->rxmbufout);
+#ifdef EN_DEBUG
+ printf("%s: rx%d: out of mbufs\n", sc->sc_dev.dv_xname, slot);
+#endif
+ }
+#ifdef EN_DEBUG
+ printf("%s: rx%d: allocate mbuf %p, mlen=%d, drqneed=%d\n",
+ sc->sc_dev.dv_xname, slot, m, mlen, drqneed);
+#endif
+ }
+
+#ifdef EN_DEBUG
+ printf("%s: rx%d: VCI %d, mbuf_chain %p, mlen %d, fill %d\n",
+ sc->sc_dev.dv_xname, slot, vci, m, mlen, fill);
+#endif
+
+ /*
+ * now check to see if we've got the DRQs needed. if we are out of
+ * DRQs we must quit (saving our mbuf, if we've got one).
+ */
+
+ needfill = (fill) ? 1 : 0;
+ if (drqneed + needfill > sc->drq_free) {
+ sc->need_drqs = 1; /* flag condition */
+ if (m == NULL) {
+ EN_COUNT(sc->rxoutboth);
+#ifdef EN_DEBUG
+ printf("%s: rx%d: out of DRQs *and* mbufs!\n", sc->sc_dev.dv_xname, slot);
+#endif
+ return; /* >>> exit here if out of both mbufs and DRQs <<< */
+ }
+ sav = mtod(m, u_int32_t *);
+ sav[0] = cur;
+ sav[1] = drqneed;
+ IF_ENQUEUE(&sc->rxslot[slot].q, m);
+ EN_COUNT(sc->rxdrqout);
+#ifdef EN_DEBUG
+ printf("%s: rx%d: out of DRQs\n", sc->sc_dev.dv_xname, slot);
+#endif
+ return; /* >>> exit here if out of DRQs <<< */
+ }
+
+ /*
+ * at this point all resources have been allocated and we are commited
+ * to servicing this slot.
+ *
+ * dma = last location we told chip about
+ * cur = current location
+ * mlen = space in the mbuf we want
+ * need = bytes to xfer in (decrs to zero)
+ * fill = how much fill we need
+ * tlen = how much data to transfer to this mbuf
+ * cnt/bcode/count = <same as xmit>
+ *
+ * 'needfill' not used after this point
+ */
+
+ dma = cur; /* dma = last location we told chip about */
+ need = roundup(mlen, sizeof(u_int32_t));
+ fill = fill - (need - mlen); /* note: may invalidate 'needfill' */
+
+ for (tmp = m ; tmp != NULL && need > 0 ; tmp = tmp->m_next) {
+ tlen = roundup(tmp->m_len, sizeof(u_int32_t)); /* m_len set by en_mget */
+ data = mtod(tmp, u_int32_t *);
+
+#ifdef EN_DEBUG
+ printf("%s: rx%d: load mbuf %p, m_len=%d, m_data=%p, tlen=%d\n",
+ sc->sc_dev.dv_xname, slot, tmp, tmp->m_len, tmp->m_data, tlen);
+#endif
+
+ /* copy data */
+ if (EN_NORXDMA || !en_dma || tlen < EN_MINDMA) {
+ datastop = (u_int32_t *)((u_char *) data + tlen);
+ /* copy loop: preserve byte order!!! use READDAT */
+ while (data != datastop) {
+ *data = EN_READDAT(sc, cur);
+ data++;
+ EN_WRAPADD(start, stop, cur, 4);
+ }
+ need -= tlen;
+#ifdef EN_DEBUG
+ printf("%s: rx%d: vci%d: copied %d bytes (%d left)\n",
+ sc->sc_dev.dv_xname, slot, vci, tlen, need);
+#endif
+ continue;
+ }
+
+ /* DMA data (check to see if we need to sync DRQ first) */
+ if (dma != cur) {
+ EN_DRQADD(sc, WORD_IDX(start,cur), vci, MIDDMA_JK, 0, 0, 0, 0);
+#ifdef EN_DEBUG
+ printf("%s: rx%d: vci%d: drq_sync: advance pointer to %d\n",
+ sc->sc_dev.dv_xname, slot, vci, cur);
+#endif
+ }
+
+#if !defined(MIDWAY_ENIONLY)
+
+ /*
+ * the adaptec DMA engine is smart and handles everything for us.
+ */
+
+ if (sc->is_adaptec) {
+ need -= tlen;
+ EN_WRAPADD(start, stop, cur, tlen);
+#ifdef EN_DEBUG
+ printf("%s: rx%d: vci%d: adp_dma %d bytes (%d left)\n",
+ sc->sc_dev.dv_xname, slot, vci, tlen, need);
+#endif
+ end = (need == 0 && !fill) ? MID_DMA_END : 0;
+ EN_DRQADD(sc, tlen, vci, 0, vtophys(data), mlen, slot, end);
+ if (end)
+ goto done;
+ dma = cur; /* update dma pointer */
+ continue;
+ }
+#endif /* !MIDWAY_ENIONLY */
+
+
+#if !defined(MIDWAY_ADPONLY)
+
+ /*
+ * the ENI DMA engine is not so smart and need more help from us
+ */
+
+ /* do we need to do a DMA op to align? */
+ if (sc->alburst &&
+ (needalign = (((unsigned long) data) & sc->bestburstmask)) != 0) {
+ cnt = sc->bestburstlen - needalign;
+ if (cnt > tlen) {
+ cnt = tlen;
+ count = cnt / sizeof(u_int32_t);
+ bcode = MIDDMA_WORD;
+ } else {
+ count = cnt / sizeof(u_int32_t);
+ bcode = en_dmaplan[count].bcode;
+ count = cnt >> en_dmaplan[count].divshift;
+ }
+ need -= cnt;
+ EN_WRAPADD(start, stop, cur, cnt);
+#ifdef EN_DEBUG
+ printf("%s: rx%d: vci%d: al_dma %d bytes (%d left)\n",
+ sc->sc_dev.dv_xname, slot, vci, cnt, need);
+#endif
+ tlen -= cnt;
+ end = (need == 0 && !fill) ? MID_DMA_END : 0;
+ EN_DRQADD(sc, count, vci, bcode, vtophys(data), mlen, slot, end);
+ if (end)
+ goto done;
+ data = (u_int32_t *)((u_char *) data + cnt);
+ }
+
+ /* do we need a max-sized burst? */
+ if (tlen >= sc->bestburstlen) {
+ count = tlen >> sc->bestburstshift;
+ cnt = count << sc->bestburstshift;
+ bcode = sc->bestburstcode;
+ need -= cnt;
+ EN_WRAPADD(start, stop, cur, cnt);
+#ifdef EN_DEBUG
+ printf("%s: rx%d: vci%d: best_dma %d bytes (%d left)\n",
+ sc->sc_dev.dv_xname, slot, vci, cnt, need);
+#endif
+ tlen -= cnt;
+ end = (need == 0 && !fill) ? MID_DMA_END : 0;
+ EN_DRQADD(sc, count, vci, bcode, vtophys(data), mlen, slot, end);
+ if (end)
+ goto done;
+ data = (u_int32_t *)((u_char *) data + cnt);
+ }
+
+ /* do we need to do a cleanup burst? */
+ if (tlen) {
+ count = tlen / sizeof(u_int32_t);
+ bcode = en_dmaplan[count].bcode;
+ count = tlen >> en_dmaplan[count].divshift;
+ need -= tlen;
+ EN_WRAPADD(start, stop, cur, tlen);
+#ifdef EN_DEBUG
+ printf("%s: rx%d: vci%d: cleanup_dma %d bytes (%d left)\n",
+ sc->sc_dev.dv_xname, slot, vci, tlen, need);
+#endif
+ end = (need == 0 && !fill) ? MID_DMA_END : 0;
+ EN_DRQADD(sc, count, vci, bcode, vtophys(data), mlen, slot, end);
+ if (end)
+ goto done;
+ }
+
+ dma = cur; /* update dma pointer */
+
+#endif /* !MIDWAY_ADPONLY */
+
+ }
+
+ /* skip the end */
+ if (fill || dma != cur) {
+#ifdef EN_DEBUG
+ if (fill)
+ printf("%s: rx%d: vci%d: skipping %d bytes of fill\n",
+ sc->sc_dev.dv_xname, slot, vci, fill);
+ else
+ printf("%s: rx%d: vci%d: syncing chip from 0x%x to 0x%x [cur]\n",
+ sc->sc_dev.dv_xname, slot, vci, dma, cur);
+#endif
+ EN_WRAPADD(start, stop, cur, fill);
+ EN_DRQADD(sc, WORD_IDX(start,cur), vci, MIDDMA_JK, 0, mlen,
+ slot, MID_DMA_END);
+ /* dma = cur; */ /* not necessary since we are done */
+ }
+
+ /*
+ * done, remove stuff we don't want to pass up:
+ * raw mode (boodi mode): pass everything up for later processing
+ * aal5: remove RBD
+ * aal0: remove RBD + cell header
+ */
+
+done:
+ if (m) {
+ if (!raw) {
+ cnt = MID_RBD_SIZE;
+ if (!aal5) cnt += MID_CHDR_SIZE;
+ m->m_len -= cnt; /* chop! */
+ m->m_pkthdr.len -= cnt;
+ m->m_data += cnt;
+ }
+ IF_ENQUEUE(&sc->rxslot[slot].indma, m);
+ }
+ sc->rxslot[slot].cur = cur; /* update master copy of 'cur' */
+
+#ifdef EN_DEBUG
+ printf("%s: rx%d: vci%d: DONE! cur now =0x%x\n",
+ sc->sc_dev.dv_xname, slot, vci, cur);
+#endif
+
+ goto same_vci; /* get next packet in this slot */
+}
+
+
+#ifdef EN_DDBHOOK
+/*
+ * functions we can call from ddb
+ */
+
+/*
+ * en_dump: dump the state
+ */
+
+#define END_SWSL 0x00000040 /* swsl state */
+#define END_DRQ 0x00000020 /* drq state */
+#define END_DTQ 0x00000010 /* dtq state */
+#define END_RX 0x00000008 /* rx state */
+#define END_TX 0x00000004 /* tx state */
+#define END_MREGS 0x00000002 /* registers */
+#define END_STATS 0x00000001 /* dump stats */
+
+#define END_BITS "\20\7SWSL\6DRQ\5DTQ\4RX\3TX\2MREGS\1STATS"
+
+int en_dump(unit, level)
+
+int unit, level;
+
+{
+ struct en_softc *sc;
+ int lcv, cnt, slot;
+ u_int32_t ptr, reg;
+
+ for (lcv = 0 ; lcv < en_cd.cd_ndevs ; lcv++) {
+ sc = (struct en_softc *) en_cd.cd_devs[lcv];
+ if (sc == NULL) continue;
+ if (unit != -1 && unit != lcv)
+ continue;
+
+ printf("dumping device %s at level 0x%b\n", sc->sc_dev.dv_xname, level,
+ END_BITS);
+
+ if (sc->dtq_us == 0) {
+ printf("<hasn't been en_init'd yet>\n");
+ continue;
+ }
+
+ if (level & END_STATS) {
+ printf(" en_stats:\n");
+ printf(" %d mfix (%d failed); %d/%d head/tail byte DMAs, %d flushes\n",
+ sc->mfix, sc->mfixfail, sc->headbyte, sc->tailbyte, sc->tailflush);
+ printf(" %d rx dma overflow interrupts\n", sc->dmaovr);
+ printf(" %d times we ran out of TX space and stalled\n",
+ sc->txoutspace);
+ printf(" %d times we ran out of DTQs\n", sc->txdtqout);
+ printf(" %d times we launched a packet\n", sc->launch);
+ printf(" %d times we launched without on-board header\n", sc->lheader);
+ printf(" %d times we launched without on-board tail\n", sc->ltail);
+ printf(" %d times we pulled the hw service list\n", sc->hwpull);
+ printf(" %d times we pushed a vci on the sw service list\n",
+ sc->swadd);
+ printf(" %d times RX pulled an mbuf from Q that wasn't ours\n",
+ sc->rxqnotus);
+ printf(" %d times RX pulled a good mbuf from Q\n", sc->rxqus);
+ printf(" %d times we ran out of mbufs *and* DRQs\n", sc->rxoutboth);
+ printf(" %d times we ran out of DRQs\n", sc->rxdrqout);
+
+ printf(" %d trasmit packets dropped due to mbsize\n", sc->txmbovr);
+ printf(" %d cells trashed due to turned off rxvc\n", sc->vtrash);
+ printf(" %d cells trashed due to totally full buffer\n", sc->otrash);
+ printf(" %d cells trashed due almost full buffer\n", sc->ttrash);
+ printf(" %d rx mbuf allocation failures\n", sc->rxmbufout);
+#ifdef NATM
+ printf(" %d drops at natmintrq\n", natmintrq.ifq_drops);
+#ifdef NATM_STAT
+ printf(" natmintr so_rcv: ok/drop cnt: %d/%d, ok/drop bytes: %d/%d\n",
+ natm_sookcnt, natm_sodropcnt, natm_sookbytes, natm_sodropbytes);
+#endif
+#endif
+ }
+
+ if (level & END_MREGS) {
+ printf("mregs:\n");
+ printf("resid = 0x%x\n", EN_READ(sc, MID_RESID));
+ printf("interrupt status = 0x%b\n",
+ EN_READ(sc, MID_INTSTAT), MID_INTBITS);
+ printf("interrupt enable = 0x%b\n",
+ EN_READ(sc, MID_INTENA), MID_INTBITS);
+ printf("mcsr = 0x%b\n", EN_READ(sc, MID_MAST_CSR), MID_MCSRBITS);
+ printf("serv_write = [chip=%d] [us=%d]\n", EN_READ(sc, MID_SERV_WRITE),
+ MID_SL_A2REG(sc->hwslistp));
+ printf("dma addr = 0x%x\n", EN_READ(sc, MID_DMA_ADDR));
+ printf("DRQ: chip[rd=0x%x,wr=0x%x], sc[chip=0x%x,us=0x%x]\n",
+ MID_DRQ_REG2A(EN_READ(sc, MID_DMA_RDRX)),
+ MID_DRQ_REG2A(EN_READ(sc, MID_DMA_WRRX)), sc->drq_chip, sc->drq_us);
+ printf("DTQ: chip[rd=0x%x,wr=0x%x], sc[chip=0x%x,us=0x%x]\n",
+ MID_DTQ_REG2A(EN_READ(sc, MID_DMA_RDTX)),
+ MID_DTQ_REG2A(EN_READ(sc, MID_DMA_WRTX)), sc->dtq_chip, sc->dtq_us);
+
+ printf(" unusal txspeeds: ");
+ for (cnt = 0 ; cnt < MID_N_VC ; cnt++)
+ if (sc->txspeed[cnt])
+ printf(" vci%d=0x%x", cnt, sc->txspeed[cnt]);
+ printf("\n");
+
+ printf(" rxvc slot mappings: ");
+ for (cnt = 0 ; cnt < MID_N_VC ; cnt++)
+ if (sc->rxvc2slot[cnt] != RX_NONE)
+ printf(" %d->%d", cnt, sc->rxvc2slot[cnt]);
+ printf("\n");
+
+ }
+
+ if (level & END_TX) {
+ printf("tx:\n");
+ for (slot = 0 ; slot < EN_NTX; slot++) {
+ printf("tx%d: start/stop/cur=0x%x/0x%x/0x%x [%d] ", slot,
+ sc->txslot[slot].start, sc->txslot[slot].stop, sc->txslot[slot].cur,
+ (sc->txslot[slot].cur - sc->txslot[slot].start)/4);
+ printf("mbsize=%d, bfree=%d\n", sc->txslot[slot].mbsize,
+ sc->txslot[slot].bfree);
+ printf("txhw: base_address=0x%x, size=%d, read=%d, descstart=%d\n",
+ MIDX_BASE(EN_READ(sc, MIDX_PLACE(slot))),
+ MIDX_SZ(EN_READ(sc, MIDX_PLACE(slot))),
+ EN_READ(sc, MIDX_READPTR(slot)), EN_READ(sc, MIDX_DESCSTART(slot)));
+ }
+ }
+
+ if (level & END_RX) {
+ printf(" recv slots:\n");
+ for (slot = 0 ; slot < sc->en_nrx; slot++) {
+ printf("rx%d: vci=%d: start/stop/cur=0x%x/0x%x/0x%x ", slot,
+ sc->rxslot[slot].atm_vci, sc->rxslot[slot].start,
+ sc->rxslot[slot].stop, sc->rxslot[slot].cur);
+ printf("mode=0x%x, atm_flags=0x%x, oth_flags=0x%x\n",
+ sc->rxslot[slot].mode, sc->rxslot[slot].atm_flags,
+ sc->rxslot[slot].oth_flags);
+ printf("RXHW: mode=0x%x, DST_RP=0x%x, WP_ST_CNT=0x%x\n",
+ EN_READ(sc, MID_VC(sc->rxslot[slot].atm_vci)),
+ EN_READ(sc, MID_DST_RP(sc->rxslot[slot].atm_vci)),
+ EN_READ(sc, MID_WP_ST_CNT(sc->rxslot[slot].atm_vci)));
+ }
+ }
+
+ if (level & END_DTQ) {
+ printf(" dtq [need_dtqs=%d,dtq_free=%d]:\n",
+ sc->need_dtqs, sc->dtq_free);
+ ptr = sc->dtq_chip;
+ while (ptr != sc->dtq_us) {
+ reg = EN_READ(sc, ptr);
+ printf("\t0x%x=[cnt=%d, chan=%d, end=%d, type=%d @ 0x%x]\n",
+ sc->dtq[MID_DTQ_A2REG(ptr)], MID_DMA_CNT(reg), MID_DMA_TXCHAN(reg),
+ (reg & MID_DMA_END) != 0, MID_DMA_TYPE(reg), EN_READ(sc, ptr+4));
+ EN_WRAPADD(MID_DTQOFF, MID_DTQEND, ptr, 8);
+ }
+ }
+
+ if (level & END_DRQ) {
+ printf(" drq [need_drqs=%d,drq_free=%d]:\n",
+ sc->need_drqs, sc->drq_free);
+ ptr = sc->drq_chip;
+ while (ptr != sc->drq_us) {
+ reg = EN_READ(sc, ptr);
+ printf("\t0x%x=[cnt=%d, chan=%d, end=%d, type=%d @ 0x%x]\n",
+ sc->drq[MID_DRQ_A2REG(ptr)], MID_DMA_CNT(reg), MID_DMA_RXVCI(reg),
+ (reg & MID_DMA_END) != 0, MID_DMA_TYPE(reg), EN_READ(sc, ptr+4));
+ EN_WRAPADD(MID_DRQOFF, MID_DRQEND, ptr, 8);
+ }
+ }
+
+ if (level & END_SWSL) {
+ printf(" swslist [size=%d]: ", sc->swsl_size);
+ for (cnt = sc->swsl_head ; cnt != sc->swsl_tail ;
+ cnt = (cnt + 1) % MID_SL_N)
+ printf("0x%x ", sc->swslist[cnt]);
+ printf("\n");
+ }
+
+ }
+ return(0);
+}
+
+/*
+ * en_dumpmem: dump the memory
+ */
+
+int en_dumpmem(unit, addr, len)
+
+int unit, addr, len;
+
+{
+ struct en_softc *sc;
+ u_int32_t reg;
+
+ if (unit < 0 || unit > en_cd.cd_ndevs ||
+ (sc = (struct en_softc *) en_cd.cd_devs[unit]) == NULL) {
+ printf("invalid unit number: %d\n", unit);
+ return(0);
+ }
+ addr = addr & ~3;
+ if (addr < MID_RAMOFF || addr + len*4 > MID_MAXOFF || len <= 0) {
+ printf("invalid addr/len number: %d, %d\n", addr, len);
+ return(0);
+ }
+ printf("dumping %d words starting at offset 0x%x\n", len, addr);
+ while (len--) {
+ reg = EN_READ(sc, addr);
+ printf("mem[0x%x] = 0x%x\n", addr, reg);
+ addr += 4;
+ }
+ return(0);
+}
+#endif
+
+
+#endif /* NEN > 0 || !defined(__FreeBSD__) */
diff --git a/sys/dev/en/midwayreg.h b/sys/dev/en/midwayreg.h
new file mode 100644
index 0000000..3951ade
--- /dev/null
+++ b/sys/dev/en/midwayreg.h
@@ -0,0 +1,304 @@
+/* $NetBSD: midwayreg.h,v 1.6 1997/03/20 21:34:47 chuck Exp $ */
+
+/*
+ * m i d w a y r e g . h
+ *
+ * this file contains the description of the ENI ATM midway chip
+ * data structures. see midway.c for more details.
+ *
+ */
+
+#if defined(sparc) || defined(__FreeBSD__)
+/* XXX: gross. netbsd/sparc doesn't have machine/bus.h yet. */
+typedef void * bus_space_tag_t;
+typedef u_int32_t pci_chipset_tag_t;
+typedef caddr_t bus_space_handle_t;
+typedef u_int32_t bus_size_t;
+typedef caddr_t bus_addr_t;
+
+#define bus_space_read_4(t, h, o) ((void) t, \
+ (*(volatile u_int32_t *)((h) + (o))))
+#define bus_space_write_4(t, h, o, v) \
+ ((void) t, ((void)(*(volatile u_int32_t *)((h) + (o)) = (v))))
+
+#if defined(sparc)
+#define vtophys(x) ((u_int32_t)(x)) /* sun4c dvma */
+#endif
+
+#endif
+
+
+#define MID_SZTOB(X) ((X) * 256 * 4) /* size to bytes */
+#define MID_BTOSZ(X) ((X) / 256 / 4) /* bytes to "size" */
+
+#define MID_N_VC 1024 /* # of VCs we can use */
+#define MID_NTX_CH 8 /* 8 transmit channels (shared) */
+#define MID_ATMDATASZ 48 /* need data in 48 byte blocks */
+
+/*
+ * card data structures, top down
+ *
+ * in order to have a portable driver, the netbsd guys will not let us
+ * use structs. we have a bus_space_handle_t which is the en_base address.
+ * everything else is an offset from that base. all card data must be
+ * accessed with bus_space_read_4()/bus_space_write_4():
+ *
+ * rv = bus_space_read_4(sc->en_memt, sc->en_base, BYTE_OFFSET);
+ * bus_space_write_4(sc->en_memt, sc->en_base, BYTE_OFFSET, VALUE);
+ *
+ * en_card: the whole card (prom + phy + midway + obmem)
+ * obmem contains: vci tab + dma queues (rx & tx) + service list + bufs
+ */
+
+/* byte offsets from en_base of various items */
+#define MID_PHYOFF 0x030000 /* PHY offset */
+#define MID_MIDOFF 0x040000 /* midway regs offset */
+#define MID_RAMOFF 0x200000 /* RAM offset */
+#define MID_DRQOFF 0x204000 /* DRQ offset */
+#define MID_DRQEND MID_DTQOFF /* DRQ end */
+#define MID_DTQOFF 0x205000 /* DTQ offset */
+#define MID_DTQEND MID_SLOFF /* DTQ end */
+#define MID_SLOFF 0x206000 /* service list */
+#define MID_SLEND MID_BUFOFF /* service list end */
+#define MID_BUFOFF 0x207000 /* buffer area */
+#define MID_PROBEOFF 0x21fffc /* start probe here */
+#define MID_PROBSIZE 0x020000 /* 128 KB */
+#define MID_MAXOFF 0x3ffffc /* max offset */
+
+/*
+ * prom & phy: not defined here
+ */
+
+/*
+ * midway regs (byte offsets from en_base)
+ */
+
+#define MID_RESID 0x40000 /* write=reset reg, read=ID reg */
+
+#define MID_VER(X) (((X) & 0xf0000000) >> 28) /* midway version # */
+#define MID_MID(X) (((X) & 0x700) >> 8) /* motherboard ID */
+#define MID_IS_SABRE(X) ((X) & 0x80) /* sabre controller? */
+#define MID_IS_SUNI(X) ((X) & 0x40) /* SUNI? vs utopia */
+#define MID_IS_UPIPE(X) ((X) & 0x20) /* utopia pipeline? */
+#define MID_DID(X) ((X) & 0x1f) /* daughterboard ID */
+
+#define MID_INTACK 0x40004 /* interrupt ACK */
+#define MID_INTSTAT 0x40008 /* interrupt status */
+#define MID_INTENA 0x4000c /* interrupt enable */
+
+#define MID_TXCHAN(N) (1 << ((N) + 9)) /* ack/status/enable xmit channel bit*/
+#define MID_INT_TX 0x1fe00 /* mask for any xmit interrupt */
+#define MID_INT_DMA_OVR 0x00100 /* DMA overflow interrupt */
+#define MID_INT_IDENT 0x00080 /* ident match error interrupt */
+#define MID_INT_LERR 0x00040 /* LERR interrupt (sbus?) */
+#define MID_INT_DMA_ERR 0x00020 /* DMA error interrupt */
+#define MID_INT_DMA_RX 0x00010 /* DMA recv interrupt */
+#define MID_INT_DMA_TX 0x00008 /* DMA xmit interrupt */
+#define MID_INT_SERVICE 0x00004 /* service list interrupt */
+#define MID_INT_SUNI 0x00002 /* SUNI interrupt */
+#define MID_INT_STATS 0x00001 /* stats overflow interrupt */
+
+#define MID_INT_ANY 0x1ffff /* any interrupt? */
+
+#define MID_INTBITS "\20\21T7\20T6\17T5\16T4\15T3\14T2\13T1\12T0\11DMAOVR\10ID\7LERR\6DMAERR\5RXDMA\4TXDMA\3SERV\2SUNI\1STAT"
+
+#define MID_MAST_CSR 0x40010 /* master CSR */
+
+#define MID_IPL(X) (((X) & 0x1c0) >> 6) /* IPL */
+#define MID_SETIPL(I) ((I) << 6)
+#define MID_MCSR_TXLOCK 0x20 /* lock on xmit overflow mode */
+/* NOTE: next 5 bits: write 1 means enable, write 0 means no change */
+#define MID_MCSR_ENDMA 0x10 /* DMA enable */
+#define MID_MCSR_ENTX 0x08 /* TX enable */
+#define MID_MCSR_ENRX 0x04 /* RX enable */
+#define MID_MCSR_W1MS 0x02 /* wait 1 msec */
+#define MID_MCSR_W500US 0x01 /* wait 500 usec */
+
+#define MID_MCSRBITS "\20\6LCK\5DMAON\4TXON\3RXON\2W1MS\1W500US"
+
+#define MID_STAT 0x40014 /* stat register, clear on read */
+
+#define MID_VTRASH(X) (((X) >> 16) & 0xffff)
+ /* # cells trashed due to VCI's mode */
+#define MID_OTRASH(X) ((X) & 0xffff) /* # cells trashed due to overflow */
+
+#define MID_SERV_WRITE 0x40018 /* 10 bit service write pointer (r/o) */
+#define MID_DMA_ADDR 0x4001c /* VA of DMA (r/o) */
+
+ /* DMA queue pointers (bits 0 to 8) */
+#define MID_DMA_WRRX 0x40020 /* write ptr. for DMA recv queue */
+ /* (for adaptor -> host xfers) */
+#define MID_DMA_RDRX 0x40024 /* read ptr for DMA recv queue (r/o) */
+ /* (i.e. current adaptor->host xfer) */
+#define MID_DMA_WRTX 0x40028 /* write ptr for DMA xmit queue */
+ /* (for host -> adaptor xfers) */
+#define MID_DMA_RDTX 0x4002c /* read ptr for DMA xmit queue (r/o) */
+ /* (i.e. current host->adaptor xfer) */
+
+ /* xmit channel regs (1 per channel, MID_NTX_CH max channels) */
+
+#define MIDX_PLACE(N) (0x40040+((N)*0x10)) /* xmit place */
+
+#define MIDX_MKPLACE(SZ,LOC) ( ((SZ) << 11) | (LOC) )
+#define MIDX_LOC(X) ((X) & 0x7ff) /* location in obmem */
+#define MIDX_SZ(X) ((X) >> 11) /* (size of block / 256) in int32_t's*/
+#define MIDX_BASE(X) \
+ (((MIDX_LOC(X) << MIDV_LOCTOPSHFT) * sizeof(u_int32_t)) + MID_RAMOFF)
+
+ /* the following two regs are word offsets in the block */
+#define MIDX_READPTR(N) (0x40044+((N)*0x10)) /* xmit read pointer (r/o) */
+#define MIDX_DESCSTART(N) (0x40048+((N)*0x10)) /* seg currently in DMA (r/o) */
+
+
+/*
+ * obmem items
+ */
+
+/*
+ * vci table in obmem (offset from MID_VCTOFF)
+ */
+
+#define MID_VC(N) (MID_RAMOFF+((N)*0x10))
+
+#define MIDV_TRASH 0x00000000 /* ignore VC */
+#define MIDV_AAL5 0x80000000 /* do AAL5 on it */
+#define MIDV_NOAAL 0x40000000 /* do per-cell stuff on it */
+#define MIDV_MASK 0xc0000000 /* mode mask */
+#define MIDV_SETMODE(VC,M) (((VC) & ~(MIDV_MASK)) | (M)) /* new mode */
+#define MIDV_PTI 0x20000000 /* save PTI cells? */
+#define MIDV_LOCTOPSHFT 8 /* shift to get top 11 bits of 19 */
+#define MIDV_LOCSHIFT 18
+#define MIDV_LOCMASK 0x7ff
+#define MIDV_LOC(X) (((X) >> MIDV_LOCSHIFT) & MIDV_LOCMASK)
+ /* 11 most sig bits of addr */
+#define MIDV_SZSHIFT 15
+#define MIDV_SZ(X) (((X) >> MIDV_SZSHIFT) & 7)
+ /* size encoded the usual way */
+#define MIDV_INSERVICE 0x1 /* in service list */
+
+#define MID_DST_RP(N) (MID_VC(N)|0x4)
+
+#define MIDV_DSTART_SHIFT 16 /* shift */
+#define MIDV_DSTART(X) (((X) >> MIDV_DSTART_SHIFT) & 0x7fff)
+#define MIDV_READP_MASK 0x7fff /* valid bits, (shift = 0) */
+
+#define MID_WP_ST_CNT(N) (MID_VC(N)|0x8) /* write pointer/state/count */
+
+#define MIDV_WRITEP_MASK 0x7fff0000 /* mask for write ptr. */
+#define MIDV_WRITEP_SHIFT 16
+#define MIDV_ST_IDLE 0x0000
+#define MIDV_ST_TRASH 0xc000
+#define MIDV_ST_REASS 0x4000
+#define MIDV_CCOUNT 0x7ff /* cell count */
+
+#define MID_CRC(N) (MID_VC(N)|0xc) /* CRC */
+
+/*
+ * dma recv q.
+ */
+
+#define MID_DMA_END (1 << 5) /* for both tx and rx */
+#define MID_DMA_CNT(X) (((X) >> 16) & 0xffff)
+#define MID_DMA_TXCHAN(X) (((X) >> 6) & 0x7)
+#define MID_DMA_RXVCI(X) (((X) >> 6) & 0x3ff)
+#define MID_DMA_TYPE(X) ((X) & 0xf)
+
+#define MID_DRQ_N 512 /* # of descriptors */
+#define MID_DRQ_A2REG(N) (((N) - MID_DRQOFF) >> 3)
+ /* convert byte offset to reg value */
+#define MID_DRQ_REG2A(N) (((N) << 3) + MID_DRQOFF) /* and back */
+
+/* note: format of word 1 of RXQ is different beween ENI and ADP cards */
+#define MID_MK_RXQ_ENI(CNT,VC,END,TYPE) \
+ ( ((CNT) << 16)|((VC) << 6)|(END)|(TYPE) )
+
+#define MID_MK_RXQ_ADP(CNT,VC,END,JK) \
+ ( ((CNT) << 12)|((VC) << 2)|((END) >> 4)|(((JK) != 0) ? 1 : 0))
+/*
+ * dma xmit q.
+ */
+
+#define MID_DTQ_N 512 /* # of descriptors */
+#define MID_DTQ_A2REG(N) (((N) - MID_DTQOFF) >> 3)
+ /* convert byte offset to reg value */
+#define MID_DTQ_REG2A(N) (((N) << 3) + MID_DTQOFF) /* and back */
+
+
+/* note: format of word 1 of TXQ is different beween ENI and ADP cards */
+#define MID_MK_TXQ_ENI(CNT,CHN,END,TYPE) \
+ ( ((CNT) << 16)|((CHN) << 6)|(END)|(TYPE) )
+
+#define MID_MK_TXQ_ADP(CNT,CHN,END,JK) \
+ ( ((CNT) << 12)|((CHN) << 2)|((END) >> 4)|(((JK) != 0) ? 1 : 0) )
+
+/*
+ * dma types
+ */
+
+#define MIDDMA_JK 0x3 /* just kidding */
+#define MIDDMA_BYTE 0x1 /* byte */
+#define MIDDMA_2BYTE 0x2 /* 2 bytes */
+#define MIDDMA_WORD 0x0 /* word */
+#define MIDDMA_2WORD 0x7 /* 2 words */
+#define MIDDMA_4WORD 0x4 /* 4 words */
+#define MIDDMA_8WORD 0x5 /* 8 words */
+#define MIDDMA_16WORD 0x6 /* 16 words!!! */
+#define MIDDMA_2WMAYBE 0xf /* 2 words, maybe */
+#define MIDDMA_4WMAYBE 0xc /* 4 words, maybe */
+#define MIDDMA_8WMAYBE 0xd /* 8 words, maybe */
+#define MIDDMA_16WMAYBE 0xe /* 16 words, maybe */
+
+#define MIDDMA_MAYBE 0xc /* mask to detect WMAYBE dma code */
+#define MIDDMA_MAXBURST (16 * sizeof(u_int32_t)) /* largest burst */
+
+/*
+ * service list
+ */
+
+#define MID_SL_N 1024 /* max # entries on slist */
+#define MID_SL_A2REG(N) (((N) - MID_SLOFF) >> 2)
+ /* convert byte offset to reg value */
+#define MID_SL_REG2A(N) (((N) << 2) + MID_SLOFF) /* and back */
+
+/*
+ * data in the buffer area of obmem
+ */
+
+/*
+ * recv buffer desc. (1 u_int32_t at start of buffer)
+ */
+
+#define MID_RBD_SIZE 4 /* RBD size */
+#define MID_CHDR_SIZE 4 /* on aal0, cell header size */
+#define MID_RBD_ID(X) ((X) & 0xfe000000) /* get ID */
+#define MID_RBD_STDID 0x36000000 /* standard ID */
+#define MID_RBD_CLP 0x01000000 /* CLP: cell loss priority */
+#define MID_RBD_CE 0x00010000 /* CE: congestion experienced */
+#define MID_RBD_T 0x00001000 /* T: trashed due to overflow */
+#define MID_RBD_CRCERR 0x00000800 /* CRC error */
+#define MID_RBD_CNT(X) ((X) & 0x7ff) /* cell count */
+
+/*
+ * xmit buffer desc. (2 u_int32_t's at start of buffer)
+ * (note we treat the PR & RATE as a single u_int8_t)
+ */
+
+#define MID_TBD_SIZE 8
+#define MID_TBD_MK1(AAL,PR_RATE,CNT) \
+ (MID_TBD_STDID|(AAL)|((PR_RATE) << 19)|(CNT))
+#define MID_TBD_STDID 0xb0000000 /* standard ID */
+#define MID_TBD_AAL5 0x08000000 /* AAL 5 */
+#define MID_TBD_NOAAL5 0x00000000 /* not AAL 5 */
+
+#define MID_TBD_MK2(VCI,PTI,CLP) \
+ (((VCI) << 4)|((PTI) << 1)|(CLP))
+
+/*
+ * aal5 pdu tail, last 2 words of last cell of AAL5 frame
+ * (word 2 is CRC .. handled by hw)
+ */
+
+#define MID_PDU_SIZE 8
+#define MID_PDU_MK1(UU,CPI,LEN) \
+ (((UU) << 24)|((CPI) << 16)|(LEN))
+#define MID_PDU_LEN(X) ((X) & 0xffff)
diff --git a/sys/dev/en/midwayvar.h b/sys/dev/en/midwayvar.h
new file mode 100644
index 0000000..c17db92
--- /dev/null
+++ b/sys/dev/en/midwayvar.h
@@ -0,0 +1,205 @@
+/* $NetBSD: midwayvar.h,v 1.10 1997/03/20 21:34:46 chuck Exp $ */
+
+/*
+ *
+ * Copyright (c) 1996 Charles D. Cranor and Washington University.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Charles D. Cranor and
+ * Washington University.
+ * 4. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * m i d w a y v a r . h
+ *
+ * we define the en_softc here so that bus specific modules can allocate
+ * it as the first item in their softc. note that BSD-required
+ * "struct device" is in the mid_softc!
+ *
+ * author: Chuck Cranor <chuck@ccrc.wustl.edu>
+ */
+
+/*
+ * params needed to determine softc size
+ */
+
+#ifndef EN_NTX
+#define EN_NTX 8 /* number of tx bufs to use */
+#endif
+#ifndef EN_TXSZ
+#define EN_TXSZ 32 /* trasmit buf size in KB */
+#endif
+#ifndef EN_RXSZ
+#define EN_RXSZ 32 /* recv buf size in KB */
+#endif
+#define EN_MAXNRX ((2048-(EN_NTX*EN_TXSZ))/EN_RXSZ)
+ /* largest possible NRX (depends on RAM size) */
+
+
+#if defined(__NetBSD__) || defined(__OpenBSD__) || defined(__bsdi__)
+#define EN_INTR_TYPE int
+#define EN_INTR_RET(X) return(X)
+#if defined(__NetBSD__) || defined(__OpenBSD__)
+#define EN_IOCTL_CMDT u_long
+#elif defined(__bsdi__)
+#define EN_IOCTL_CMDT int
+#endif
+
+#elif defined(__FreeBSD__)
+
+#define EN_INTR_TYPE void
+#define EN_INTR_RET(X) return
+#define EN_IOCTL_CMDT int
+
+struct device {
+ char dv_xname[IFNAMSIZ];
+};
+
+#define DV_IFNET 1
+
+struct cfdriver {
+ int zero;
+ char *name;
+ int one;
+ int cd_ndevs;
+ void *cd_devs[NEN];
+};
+
+#endif
+
+
+/*
+ * softc
+ */
+
+struct en_softc {
+ /* bsd glue */
+ struct device sc_dev; /* system device */
+ struct ifnet enif; /* network ifnet handle */
+
+ /* bus glue */
+ bus_space_tag_t en_memt; /* for EN_READ/EN_WRITE */
+ bus_space_handle_t en_base; /* base of en card */
+ bus_size_t en_obmemsz; /* size of en card (bytes) */
+ void (*en_busreset) __P((void *));
+ /* bus specific reset function */
+
+ /* serv list */
+ u_int32_t hwslistp; /* hw pointer to service list (byte offset) */
+ u_int16_t swslist[MID_SL_N]; /* software service list (see en_service()) */
+ u_int16_t swsl_head, /* ends of swslist (index into swslist) */
+ swsl_tail;
+ u_int32_t swsl_size; /* # of items in swsl */
+
+
+ /* xmit dma */
+ u_int32_t dtq[MID_DTQ_N]; /* sw copy of dma q (see ENIDQ macros) */
+ u_int32_t dtq_free; /* # of dtq's free */
+ u_int32_t dtq_us; /* software copy of our pointer (byte offset) */
+ u_int32_t dtq_chip; /* chip's pointer (byte offset) */
+ u_int32_t need_dtqs; /* true if we ran out of DTQs */
+
+ /* recv dma */
+ u_int32_t drq[MID_DRQ_N]; /* sw copy of dma q (see ENIDQ macros) */
+ u_int32_t drq_free; /* # of drq's free */
+ u_int32_t drq_us; /* software copy of our pointer (byte offset) */
+ u_int32_t drq_chip; /* chip's pointer (byte offset) */
+ u_int32_t need_drqs; /* true if we ran out of DRQs */
+
+ /* xmit buf ctrl. (per channel) */
+ struct {
+ u_int32_t mbsize; /* # mbuf bytes we are using (max=TXHIWAT) */
+ u_int32_t bfree; /* # free bytes in buffer (not dma or xmit) */
+ u_int32_t start, stop; /* ends of buffer area (byte offset) */
+ u_int32_t cur; /* next free area (byte offset) */
+ u_int32_t nref; /* # of VCs using this channel */
+ struct ifqueue indma; /* mbufs being dma'd now */
+ struct ifqueue q; /* mbufs waiting for dma now */
+ } txslot[MID_NTX_CH];
+
+ /* xmit vc ctrl. (per vc) */
+ u_int8_t txspeed[MID_N_VC]; /* speed of tx on a VC */
+ u_int8_t txvc2slot[MID_N_VC]; /* map VC to slot */
+
+ /* recv vc ctrl. (per vc). maps VC number to recv slot */
+ u_int16_t rxvc2slot[MID_N_VC];
+ int en_nrx; /* # of active rx slots */
+
+ /* recv buf ctrl. (per recv slot) */
+ struct {
+ void *rxhand; /* recv. handle if doing direct delivery */
+ u_int32_t mode; /* saved copy of mode info */
+ u_int32_t start, stop; /* ends of my buffer area */
+ u_int32_t cur; /* where I am at */
+ u_int16_t atm_vci; /* backpointer to VCI */
+ u_int8_t atm_flags; /* copy of atm_flags from atm_ph */
+ u_int8_t oth_flags; /* other flags */
+ u_int32_t raw_threshold; /* for raw mode */
+ struct ifqueue indma; /* mbufs being dma'd now */
+ struct ifqueue q; /* mbufs waiting for dma now */
+ } rxslot[EN_MAXNRX]; /* recv info */
+
+ /* stats */
+ u_int32_t vtrash; /* sw copy of counter */
+ u_int32_t otrash; /* sw copy of counter */
+ u_int32_t ttrash; /* # of RBD's with T bit set */
+ u_int32_t mfix; /* # of times we had to call mfix */
+ u_int32_t mfixfail; /* # of times mfix failed */
+ u_int32_t headbyte; /* # of times we used BYTE DMA at front */
+ u_int32_t tailbyte; /* # of times we used BYTE DMA at end */
+ u_int32_t tailflush; /* # of times we had to FLUSH out DMA bytes */
+ u_int32_t txmbovr; /* # of times we dropped due to mbsize */
+ u_int32_t dmaovr; /* tx dma overflow count */
+ u_int32_t txoutspace; /* out of space in xmit buffer */
+ u_int32_t txdtqout; /* out of DTQs */
+ u_int32_t launch; /* total # of launches */
+ u_int32_t lheader; /* # of launches without OB header */
+ u_int32_t ltail; /* # of launches without OB tail */
+ u_int32_t hwpull; /* # of pulls off hardware service list */
+ u_int32_t swadd; /* # of pushes on sw service list */
+ u_int32_t rxqnotus; /* # of times we pull from rx q, but fail */
+ u_int32_t rxqus; /* # of good pulls from rx q */
+ u_int32_t rxoutboth; /* # of times out of mbufs and DRQs */
+ u_int32_t rxdrqout; /* # of times out of DRQs */
+ u_int32_t rxmbufout; /* # of time out of mbufs */
+
+ /* random stuff */
+ u_int32_t ipl; /* sbus interrupt lvl (1 on pci?) */
+ u_int8_t bestburstcode; /* code of best burst we can use */
+ u_int8_t bestburstlen; /* length of best burst (bytes) */
+ u_int8_t bestburstshift; /* (x >> shift) == (x / bestburstlen) */
+ u_int8_t bestburstmask; /* bits to check if not multiple of burst */
+ u_int8_t alburst; /* align dma bursts? */
+ u_int8_t is_adaptec; /* adaptec version of midway? */
+};
+
+/*
+ * exported functions
+ */
+
+void en_attach __P((struct en_softc *));
+EN_INTR_TYPE en_intr __P((void *));
+void en_reset __P((struct en_softc *));
OpenPOWER on IntegriCloud