diff options
Diffstat (limited to 'sys/dev/em/e1000_82541.c')
| -rw-r--r-- | sys/dev/em/e1000_82541.c | 51 |
1 files changed, 25 insertions, 26 deletions
diff --git a/sys/dev/em/e1000_82541.c b/sys/dev/em/e1000_82541.c index 25481de..3bc6483 100644 --- a/sys/dev/em/e1000_82541.c +++ b/sys/dev/em/e1000_82541.c @@ -30,9 +30,7 @@ POSSIBILITY OF SUCH DAMAGE. *******************************************************************************/ - -#include <sys/cdefs.h> -__FBSDID("$FreeBSD$"); +/*$FreeBSD$*/ /* e1000_82541 @@ -41,6 +39,7 @@ __FBSDID("$FreeBSD$"); * e1000_82547_rev_2 */ +#include "e1000_api.h" #include "e1000_82541.h" void e1000_init_function_pointers_82541(struct e1000_hw *hw); @@ -88,7 +87,7 @@ struct e1000_dev_spec_82541 { /** * e1000_init_phy_params_82541 - Init PHY func ptrs. - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * This is a function pointer entry point called by the api module. **/ @@ -133,7 +132,7 @@ out: /** * e1000_init_nvm_params_82541 - Init NVM func ptrs. - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * This is a function pointer entry point called by the api module. **/ @@ -231,7 +230,7 @@ out: /** * e1000_init_mac_params_82541 - Init MAC func ptrs. - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * This is a function pointer entry point called by the api module. **/ @@ -299,7 +298,7 @@ e1000_init_mac_params_82541(struct e1000_hw *hw) /** * e1000_init_function_pointers_82541 - Init func ptrs. - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * The only function explicitly called by the api module to initialize * all function pointers and parameters. @@ -316,7 +315,7 @@ e1000_init_function_pointers_82541(struct e1000_hw *hw) /** * e1000_reset_hw_82541 - Reset hardware - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * This resets the hardware into a known state. This is a * function pointer entry point called by the api module. @@ -393,7 +392,7 @@ e1000_reset_hw_82541(struct e1000_hw *hw) /** * e1000_init_hw_82541 - Initialize hardware - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * This inits the hardware readying it for operation. This is a * function pointer entry point called by the api module. @@ -454,9 +453,9 @@ out: /** * e1000_get_link_up_info_82541 - Report speed and duplex - * @hw - pointer to the HW structure - * @speed - pointer to speed buffer - * @duplex - pointer to duplex buffer + * @hw: pointer to the HW structure + * @speed: pointer to speed buffer + * @duplex: pointer to duplex buffer * * Retrieve the current speed and duplex configuration. * This is a function pointer entry point called by the api module. @@ -508,7 +507,7 @@ out: /** * e1000_phy_hw_reset_82541 - PHY hardware reset - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * Verify the reset block is not blocking us from resetting. Acquire * semaphore (if necessary) and read/set/write the device control reset @@ -544,7 +543,7 @@ out: /** * e1000_setup_copper_link_82541 - Configure copper link settings - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * Calls the appropriate function to configure the link for auto-neg or forced * speed and duplex. Then we check for link, once link is established calls @@ -601,7 +600,7 @@ out: /** * e1000_check_for_link_82541 - Check/Store link connection - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * This checks the link condition of the adapter and stores the * results in the hw->mac structure. This is a function pointer entry @@ -677,8 +676,8 @@ out: /** * e1000_config_dsp_after_link_change_82541 - Config DSP after link - * @hw - pointer to the HW structure - * @link_up - boolean flag for link up status + * @hw: pointer to the HW structure + * @link_up: boolean flag for link up status * * Return E1000_ERR_PHY when failing to read/write the PHY, else E1000_SUCCESS * at any other case. @@ -888,7 +887,7 @@ out: /** * e1000_get_cable_length_igp_82541 - Determine cable length for igp PHY - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * The automatic gain control (agc) normalizes the amplitude of the * received signal, adjusting for the attenuation produced by the @@ -961,8 +960,8 @@ out: /** * e1000_set_d3_lplu_state_82541 - Sets low power link up state for D3 - * @hw - pointer to the HW structure - * @active boolean used to enable/disable lplu + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu * * Success returns 0, Failure returns 1 * @@ -1061,7 +1060,7 @@ out: /** * e1000_setup_led_82541 - Configures SW controllable LED - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * This prepares the SW controllable LED for use and saves the current state * of the LED so it can be later restored. This is a function pointer entry @@ -1098,7 +1097,7 @@ out: /** * e1000_cleanup_led_82541 - Set LED config to default operation - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * Remove the current LED configuration and set the LED configuration * to the default value, saved from the EEPROM. This is a function pointer @@ -1128,7 +1127,7 @@ out: /** * e1000_phy_init_script_82541 - Initialize GbE PHY - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * Initializes the IGP PHY. **/ @@ -1242,8 +1241,8 @@ out: /** * e1000_init_script_state_82541 - Enable/Disable PHY init script - * @hw - pointer to the HW structure - * @state - boolean value used to enable/disable PHY init script + * @hw: pointer to the HW structure + * @state: boolean value used to enable/disable PHY init script * * Allows the driver to enable/disable the PHY init script, if the PHY is an * IGP PHY. This is a function pointer entry point called by the api module. @@ -1275,7 +1274,7 @@ out: /** * e1000_clear_hw_cntrs_82541 - Clear device specific hardware counters - * @hw - pointer to the HW structure + * @hw: pointer to the HW structure * * Clears the hardware counters by reading the counter registers. **/ |
