diff options
Diffstat (limited to 'sys/dev/dc/if_dc.c')
| -rw-r--r-- | sys/dev/dc/if_dc.c | 2689 |
1 files changed, 2689 insertions, 0 deletions
diff --git a/sys/dev/dc/if_dc.c b/sys/dev/dc/if_dc.c new file mode 100644 index 0000000..25491e0 --- /dev/null +++ b/sys/dev/dc/if_dc.c @@ -0,0 +1,2689 @@ +/* + * Copyright (c) 1997, 1998, 1999 + * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/* + * DEC "tulip" clone ethernet driver. Supports the DEC/Intel 21143 + * series chips and several workalikes including the following: + * + * Macronix 98713/98715/98725 PMAC (www.macronix.com) + * Macronix/Lite-On 82c115 PNIC II (www.macronix.com) + * Lite-On 82c168/82c169 PNIC (www.litecom.com) + * ASIX Electronics AX88140A (www.asix.com.tw) + * ASIX Electronics AX88141 (www.asix.com.tw) + * ADMtek AL981 (www.admtek.com.tw) + * ADMtek AN985 (www.admtek.com.tw) + * Davicom DM9100, DM9102 (www.davicom8.com) + * + * Datasheets for the 21143 are available at developer.intel.com. + * Datasheets for the clone parts can be found at their respective sites. + * (Except for the PNIC; see www.freebsd.org/~wpaul/PNIC/pnic.ps.gz.) + * The PNIC II is essentially a Macronix 98715A chip; the only difference + * worth noting is that its multicast hash table is only 128 bits wide + * instead of 512. + * + * Written by Bill Paul <wpaul@ee.columbia.edu> + * Electrical Engineering Department + * Columbia University, New York City + */ + +/* + * The Intel 21143 is the successor to the DEC 21140. It is basically + * the same as the 21140 but with a few new features. The 21143 supports + * three kinds of media attachments: + * + * o MII port, for 10Mbps and 100Mbps support and NWAY + * autonegotiation provided by an external PHY. + * o SYM port, for symbol mode 100Mbps support. + * o 10baseT port. + * o AUI/BNC port. + * + * The 100Mbps SYM port and 10baseT port can be used together in + * combination with the internal NWAY support to create a 10/100 + * autosensing configuration. + * + * Knowing which media is available on a given card is tough: you're + * supposed to go slogging through the EEPROM looking for media + * description structures. Unfortunately, some card vendors that use + * the 21143 don't obey the DEC SROM spec correctly, which means that + * what you find in the EEPROM may not agree with reality. Fortunately, + * the 21143 provides us a way to get around this issue: lurking in + * PCI configuration space is the Configuration Wake-Up Command Register. + * This register is loaded with a value from the EEPROM when wake on LAN + * mode is enabled; this value tells us quite clearly what kind of media + * is attached to the NIC. The main purpose of this register is to tell + * the NIC what media to scan when in wake on LAN mode, however by + * forcibly enabling wake on LAN mode, we can use to learn what kind of + * media a given NIC has available and adapt ourselves accordingly. + * + * Of course, if the media description blocks in the EEPROM are bogus. + * what are the odds that the CWUC aren't bogus as well, right? Well, + * the CWUC value is more likely to be correct since wake on LAN mode + * won't work correctly without it, and wake on LAN is a big selling + * point these days. It's also harder to screw up a single byte than + * a whole media descriptor block. + * + * Note that not all tulip workalikes are handled in this driver: we only + * deal with those which are relatively well behaved. The Winbond is + * handled separately due to its different register offsets and the + * special handling needed for its various bugs. The PNIC is handled + * here, but I'm not thrilled about it. + * + * All of the workalike chips use some form of MII transceiver support + * with the exception of the Macronix chips, which also have a SYM port. + * The ASIX AX88140A is also documented to have a SYM port, but all + * the cards I've seen use an MII transceiver, probably because the + * AX88140A doesn't support internal NWAY. + */ + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/sockio.h> +#include <sys/mbuf.h> +#include <sys/malloc.h> +#include <sys/kernel.h> +#include <sys/socket.h> + +#include <net/if.h> +#include <net/if_arp.h> +#include <net/ethernet.h> +#include <net/if_dl.h> +#include <net/if_media.h> + +#include <net/bpf.h> + +#include <vm/vm.h> /* for vtophys */ +#include <vm/pmap.h> /* for vtophys */ +#include <machine/clock.h> /* for DELAY */ +#include <machine/bus_pio.h> +#include <machine/bus_memio.h> +#include <machine/bus.h> +#include <machine/resource.h> +#include <sys/bus.h> +#include <sys/rman.h> + +#include <dev/mii/mii.h> +#include <dev/mii/miivar.h> + +#include <pci/pcireg.h> +#include <pci/pcivar.h> + +#define DC_USEIOSPACE + +#include <pci/if_dcreg.h> + +/* "controller miibus0" required. See GENERIC if you get errors here. */ +#include "miibus_if.h" + +#ifndef lint +static const char rcsid[] = + "$FreeBSD$"; +#endif + +/* + * Various supported device vendors/types and their names. + */ +static struct dc_type dc_devs[] = { + { DC_VENDORID_DEC, DC_DEVICEID_21143, + "Intel 21143 10/100BaseTX" }, + { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9100, + "Davicom DM9100 10/100BaseTX" }, + { DC_VENDORID_DAVICOM, DC_DEVICEID_DM9102, + "Davicom DM9102 10/100BaseTX" }, + { DC_VENDORID_ADMTEK, DC_DEVICEID_AL981, + "ADMtek AL981 10/100BaseTX" }, + { DC_VENDORID_ADMTEK, DC_DEVICEID_AN985, + "ADMtek AN985 10/100BaseTX" }, + { DC_VENDORID_ASIX, DC_DEVICEID_AX88140A, + "ASIX AX88140A 10/100BaseTX" }, + { DC_VENDORID_ASIX, DC_DEVICEID_AX88140A, + "ASIX AX88141 10/100BaseTX" }, + { DC_VENDORID_MX, DC_DEVICEID_98713, + "Macronix 98713 10/100BaseTX" }, + { DC_VENDORID_MX, DC_DEVICEID_98713, + "Macronix 98713A 10/100BaseTX" }, + { DC_VENDORID_CP, DC_DEVICEID_98713_CP, + "Compex RL100-TX 10/100BaseTX" }, + { DC_VENDORID_CP, DC_DEVICEID_98713_CP, + "Compex RL100-TX 10/100BaseTX" }, + { DC_VENDORID_MX, DC_DEVICEID_987x5, + "Macronix 98715/98715A 10/100BaseTX" }, + { DC_VENDORID_MX, DC_DEVICEID_987x5, + "Macronix 98725 10/100BaseTX" }, + { DC_VENDORID_LO, DC_DEVICEID_82C115, + "LC82C115 PNIC II 10/100BaseTX" }, + { DC_VENDORID_LO, DC_DEVICEID_82C168, + "82c168 PNIC 10/100BaseTX" }, + { DC_VENDORID_LO, DC_DEVICEID_82C168, + "82c169 PNIC 10/100BaseTX" }, + { 0, 0, NULL } +}; + +static int dc_probe __P((device_t)); +static int dc_attach __P((device_t)); +static int dc_detach __P((device_t)); +static void dc_acpi __P((device_t)); +static struct dc_type *dc_devtype __P((device_t)); +static int dc_newbuf __P((struct dc_softc *, int, struct mbuf *)); +static int dc_encap __P((struct dc_softc *, struct mbuf *, + u_int32_t *)); +static void dc_pnic_rx_bug_war __P((struct dc_softc *, int)); +static void dc_rxeof __P((struct dc_softc *)); +static void dc_txeof __P((struct dc_softc *)); +static void dc_tick __P((void *)); +static void dc_intr __P((void *)); +static void dc_start __P((struct ifnet *)); +static int dc_ioctl __P((struct ifnet *, u_long, caddr_t)); +static void dc_init __P((void *)); +static void dc_stop __P((struct dc_softc *)); +static void dc_watchdog __P((struct ifnet *)); +static void dc_shutdown __P((device_t)); +static int dc_ifmedia_upd __P((struct ifnet *)); +static void dc_ifmedia_sts __P((struct ifnet *, struct ifmediareq *)); + +static void dc_delay __P((struct dc_softc *)); +static void dc_eeprom_idle __P((struct dc_softc *)); +static void dc_eeprom_putbyte __P((struct dc_softc *, int)); +static void dc_eeprom_getword __P((struct dc_softc *, int, u_int16_t *)); +static void dc_eeprom_getword_pnic + __P((struct dc_softc *, int, u_int16_t *)); +static void dc_read_eeprom __P((struct dc_softc *, caddr_t, int, + int, int)); + +static void dc_mii_writebit __P((struct dc_softc *, int)); +static int dc_mii_readbit __P((struct dc_softc *)); +static void dc_mii_sync __P((struct dc_softc *)); +static void dc_mii_send __P((struct dc_softc *, u_int32_t, int)); +static int dc_mii_readreg __P((struct dc_softc *, struct dc_mii_frame *)); +static int dc_mii_writereg __P((struct dc_softc *, struct dc_mii_frame *)); +static int dc_miibus_readreg __P((device_t, int, int)); +static int dc_miibus_writereg __P((device_t, int, int, int)); +static void dc_miibus_statchg __P((device_t)); + +static void dc_setcfg __P((struct dc_softc *, int)); +static u_int32_t dc_crc_le __P((struct dc_softc *, caddr_t)); +static u_int32_t dc_crc_be __P((caddr_t)); +static void dc_setfilt_21143 __P((struct dc_softc *)); +static void dc_setfilt_asix __P((struct dc_softc *)); +static void dc_setfilt_admtek __P((struct dc_softc *)); + +static void dc_setfilt __P((struct dc_softc *)); + +static void dc_reset __P((struct dc_softc *)); +static int dc_list_rx_init __P((struct dc_softc *)); +static int dc_list_tx_init __P((struct dc_softc *)); + +#ifdef DC_USEIOSPACE +#define DC_RES SYS_RES_IOPORT +#define DC_RID DC_PCI_CFBIO +#else +#define DC_RES SYS_RES_MEMORY +#define DC_RID DC_PCI_CFBMA +#endif + +static device_method_t dc_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, dc_probe), + DEVMETHOD(device_attach, dc_attach), + DEVMETHOD(device_detach, dc_detach), + DEVMETHOD(device_shutdown, dc_shutdown), + + /* bus interface */ + DEVMETHOD(bus_print_child, bus_generic_print_child), + DEVMETHOD(bus_driver_added, bus_generic_driver_added), + + /* MII interface */ + DEVMETHOD(miibus_readreg, dc_miibus_readreg), + DEVMETHOD(miibus_writereg, dc_miibus_writereg), + DEVMETHOD(miibus_statchg, dc_miibus_statchg), + + { 0, 0 } +}; + +static driver_t dc_driver = { + "dc", + dc_methods, + sizeof(struct dc_softc) +}; + +static devclass_t dc_devclass; + +DRIVER_MODULE(if_dc, pci, dc_driver, dc_devclass, 0, 0); +DRIVER_MODULE(miibus, dc, miibus_driver, miibus_devclass, 0, 0); + +#define DC_SETBIT(sc, reg, x) \ + CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | (x)) + +#define DC_CLRBIT(sc, reg, x) \ + CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~(x)) + +#define SIO_SET(x) DC_SETBIT(sc, DC_SIO, (x)) +#define SIO_CLR(x) DC_CLRBIT(sc, DC_SIO, (x)) + +static void dc_delay(sc) + struct dc_softc *sc; +{ + int idx; + + for (idx = (300 / 33) + 1; idx > 0; idx--) + CSR_READ_4(sc, DC_BUSCTL); +} + +static void dc_eeprom_idle(sc) + struct dc_softc *sc; +{ + register int i; + + CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ); + dc_delay(sc); + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS); + dc_delay(sc); + + for (i = 0; i < 25; i++) { + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + } + + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CS); + dc_delay(sc); + CSR_WRITE_4(sc, DC_SIO, 0x00000000); + + return; +} + +/* + * Send a read command and address to the EEPROM, check for ACK. + */ +static void dc_eeprom_putbyte(sc, addr) + struct dc_softc *sc; + int addr; +{ + register int d, i; + + /* + * The AN985 has a 93C66 EEPROM on it instead of + * a 93C46. It uses a different bit sequence for + * specifying the "read" opcode. + */ + if (DC_IS_CENTAUR(sc)) + d = addr | (DC_EECMD_READ << 2); + else + d = addr | DC_EECMD_READ; + + /* + * Feed in each bit and strobe the clock. + */ + for (i = 0x400; i; i >>= 1) { + if (d & i) { + SIO_SET(DC_SIO_EE_DATAIN); + } else { + SIO_CLR(DC_SIO_EE_DATAIN); + } + dc_delay(sc); + SIO_SET(DC_SIO_EE_CLK); + dc_delay(sc); + SIO_CLR(DC_SIO_EE_CLK); + dc_delay(sc); + } + + return; +} + +/* + * Read a word of data stored in the EEPROM at address 'addr.' + * The PNIC 82c168/82c169 has its own non-standard way to read + * the EEPROM. + */ +static void dc_eeprom_getword_pnic(sc, addr, dest) + struct dc_softc *sc; + int addr; + u_int16_t *dest; +{ + register int i; + u_int32_t r; + + CSR_WRITE_4(sc, DC_PN_SIOCTL, DC_PN_EEOPCODE_READ|addr); + + for (i = 0; i < DC_TIMEOUT; i++) { + DELAY(1); + r = CSR_READ_4(sc, DC_SIO); + if (!(r & DC_PN_SIOCTL_BUSY)) { + *dest = (u_int16_t)(r & 0xFFFF); + return; + } + } + + return; +} + +/* + * Read a word of data stored in the EEPROM at address 'addr.' + */ +static void dc_eeprom_getword(sc, addr, dest) + struct dc_softc *sc; + int addr; + u_int16_t *dest; +{ + register int i; + u_int16_t word = 0; + + /* Force EEPROM to idle state. */ + dc_eeprom_idle(sc); + + /* Enter EEPROM access mode. */ + CSR_WRITE_4(sc, DC_SIO, DC_SIO_EESEL); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_ROMCTL_READ); + dc_delay(sc); + DC_CLRBIT(sc, DC_SIO, DC_SIO_EE_CLK); + dc_delay(sc); + DC_SETBIT(sc, DC_SIO, DC_SIO_EE_CS); + dc_delay(sc); + + /* + * Send address of word we want to read. + */ + dc_eeprom_putbyte(sc, addr); + + /* + * Start reading bits from EEPROM. + */ + for (i = 0x8000; i; i >>= 1) { + SIO_SET(DC_SIO_EE_CLK); + dc_delay(sc); + if (CSR_READ_4(sc, DC_SIO) & DC_SIO_EE_DATAOUT) + word |= i; + dc_delay(sc); + SIO_CLR(DC_SIO_EE_CLK); + dc_delay(sc); + } + + /* Turn off EEPROM access mode. */ + dc_eeprom_idle(sc); + + *dest = word; + + return; +} + +/* + * Read a sequence of words from the EEPROM. + */ +static void dc_read_eeprom(sc, dest, off, cnt, swap) + struct dc_softc *sc; + caddr_t dest; + int off; + int cnt; + int swap; +{ + int i; + u_int16_t word = 0, *ptr; + + for (i = 0; i < cnt; i++) { + if (DC_IS_PNIC(sc)) + dc_eeprom_getword_pnic(sc, off + i, &word); + else + dc_eeprom_getword(sc, off + i, &word); + ptr = (u_int16_t *)(dest + (i * 2)); + if (swap) + *ptr = ntohs(word); + else + *ptr = word; + } + + return; +} + +/* + * The following two routines are taken from the Macronix 98713 + * Application Notes pp.19-21. + */ +/* + * Write a bit to the MII bus. + */ +static void dc_mii_writebit(sc, bit) + struct dc_softc *sc; + int bit; +{ + if (bit) + CSR_WRITE_4(sc, DC_SIO, + DC_SIO_ROMCTL_WRITE|DC_SIO_MII_DATAOUT); + else + CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_WRITE); + + DC_SETBIT(sc, DC_SIO, DC_SIO_MII_CLK); + DC_CLRBIT(sc, DC_SIO, DC_SIO_MII_CLK); + + return; +} + +/* + * Read a bit from the MII bus. + */ +static int dc_mii_readbit(sc) + struct dc_softc *sc; +{ + CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_READ|DC_SIO_MII_DIR); + CSR_READ_4(sc, DC_SIO); + DC_SETBIT(sc, DC_SIO, DC_SIO_MII_CLK); + DC_CLRBIT(sc, DC_SIO, DC_SIO_MII_CLK); + if (CSR_READ_4(sc, DC_SIO) & DC_SIO_MII_DATAIN) + return(1); + + return(0); +} + +/* + * Sync the PHYs by setting data bit and strobing the clock 32 times. + */ +static void dc_mii_sync(sc) + struct dc_softc *sc; +{ + register int i; + + CSR_WRITE_4(sc, DC_SIO, DC_SIO_ROMCTL_WRITE); + + for (i = 0; i < 32; i++) + dc_mii_writebit(sc, 1); + + return; +} + +/* + * Clock a series of bits through the MII. + */ +static void dc_mii_send(sc, bits, cnt) + struct dc_softc *sc; + u_int32_t bits; + int cnt; +{ + int i; + + for (i = (0x1 << (cnt - 1)); i; i >>= 1) + dc_mii_writebit(sc, bits & i); +} + +/* + * Read an PHY register through the MII. + */ +static int dc_mii_readreg(sc, frame) + struct dc_softc *sc; + struct dc_mii_frame *frame; + +{ + int i, ack, s; + + s = splimp(); + + /* + * Set up frame for RX. + */ + frame->mii_stdelim = DC_MII_STARTDELIM; + frame->mii_opcode = DC_MII_READOP; + frame->mii_turnaround = 0; + frame->mii_data = 0; + + /* + * Sync the PHYs. + */ + dc_mii_sync(sc); + + /* + * Send command/address info. + */ + dc_mii_send(sc, frame->mii_stdelim, 2); + dc_mii_send(sc, frame->mii_opcode, 2); + dc_mii_send(sc, frame->mii_phyaddr, 5); + dc_mii_send(sc, frame->mii_regaddr, 5); + +#ifdef notdef + /* Idle bit */ + dc_mii_writebit(sc, 1); + dc_mii_writebit(sc, 0); +#endif + + /* Check for ack */ + ack = dc_mii_readbit(sc); + + /* + * Now try reading data bits. If the ack failed, we still + * need to clock through 16 cycles to keep the PHY(s) in sync. + */ + if (ack) { + for(i = 0; i < 16; i++) { + dc_mii_readbit(sc); + } + goto fail; + } + + for (i = 0x8000; i; i >>= 1) { + if (!ack) { + if (dc_mii_readbit(sc)) + frame->mii_data |= i; + } + } + +fail: + + dc_mii_writebit(sc, 0); + dc_mii_writebit(sc, 0); + + splx(s); + + if (ack) + return(1); + return(0); +} + +/* + * Write to a PHY register through the MII. + */ +static int dc_mii_writereg(sc, frame) + struct dc_softc *sc; + struct dc_mii_frame *frame; + +{ + int s; + + s = splimp(); + /* + * Set up frame for TX. + */ + + frame->mii_stdelim = DC_MII_STARTDELIM; + frame->mii_opcode = DC_MII_WRITEOP; + frame->mii_turnaround = DC_MII_TURNAROUND; + + /* + * Sync the PHYs. + */ + dc_mii_sync(sc); + + dc_mii_send(sc, frame->mii_stdelim, 2); + dc_mii_send(sc, frame->mii_opcode, 2); + dc_mii_send(sc, frame->mii_phyaddr, 5); + dc_mii_send(sc, frame->mii_regaddr, 5); + dc_mii_send(sc, frame->mii_turnaround, 2); + dc_mii_send(sc, frame->mii_data, 16); + + /* Idle bit. */ + dc_mii_writebit(sc, 0); + dc_mii_writebit(sc, 0); + + splx(s); + + return(0); +} + +static int dc_miibus_readreg(dev, phy, reg) + device_t dev; + int phy, reg; +{ + struct dc_mii_frame frame; + struct dc_softc *sc; + int i, rval, phy_reg; + + sc = device_get_softc(dev); + bzero((char *)&frame, sizeof(frame)); + + /* + * Note: both the AL981 and AN985 have internal PHYs, + * however the AL981 provides direct access to the PHY + * registers while the AN985 uses a serial MII interface. + * The AN985's MII interface is also buggy in that you + * can read from any MII address (0 to 31), but only address 1 + * behaves normally. To deal with both cases, we pretend + * that the PHY is at MII address 1. + */ + if (DC_IS_ADMTEK(sc) && phy != DC_ADMTEK_PHYADDR) + return(0); + + if (sc->dc_pmode == DC_PMODE_SYM) { + if (phy == (MII_NPHY - 1)) { + switch(reg) { + case MII_BMSR: + /* + * Fake something to make the probe + * code think there's a PHY here. + */ + return(BMSR_MEDIAMASK); + break; + case MII_PHYIDR1: + if (DC_IS_PNIC(sc)) + return(DC_VENDORID_LO); + return(DC_VENDORID_DEC); + break; + case MII_PHYIDR2: + if (DC_IS_PNIC(sc)) + return(DC_DEVICEID_82C168); + return(DC_DEVICEID_21143); + break; + default: + return(0); + break; + } + } else + return(0); + } + + if (DC_IS_PNIC(sc)) { + CSR_WRITE_4(sc, DC_PN_MII, DC_PN_MIIOPCODE_READ | + (phy << 23) | (reg << 18)); + for (i = 0; i < DC_TIMEOUT; i++) { + DELAY(1); + rval = CSR_READ_4(sc, DC_PN_MII); + if (!(rval & DC_PN_MII_BUSY)) { + rval &= 0xFFFF; + return(rval == 0xFFFF ? 0 : rval); + } + } + return(0); + } + + if (DC_IS_COMET(sc)) { + switch(reg) { + case MII_BMCR: + phy_reg = DC_AL_BMCR; + break; + case MII_BMSR: + phy_reg = DC_AL_BMSR; + break; + case MII_PHYIDR1: + phy_reg = DC_AL_VENID; + break; + case MII_PHYIDR2: + phy_reg = DC_AL_DEVID; + break; + case MII_ANAR: + phy_reg = DC_AL_ANAR; + break; + case MII_ANLPAR: + phy_reg = DC_AL_LPAR; + break; + case MII_ANER: + phy_reg = DC_AL_ANER; + break; + default: + printf("dc%d: phy_read: bad phy register %x\n", + sc->dc_unit, reg); + return(0); + break; + } + + rval = CSR_READ_4(sc, phy_reg) & 0x0000FFFF; + + if (rval == 0xFFFF) + return(0); + return(rval); + } + + frame.mii_phyaddr = phy; + frame.mii_regaddr = reg; + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + dc_mii_readreg(sc, &frame); + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + + return(frame.mii_data); +} + +static int dc_miibus_writereg(dev, phy, reg, data) + device_t dev; + int phy, reg, data; +{ + struct dc_softc *sc; + struct dc_mii_frame frame; + int i, phy_reg; + + sc = device_get_softc(dev); + bzero((char *)&frame, sizeof(frame)); + + if (DC_IS_ADMTEK(sc) && phy != DC_ADMTEK_PHYADDR) + return(0); + + if (DC_IS_PNIC(sc)) { + CSR_WRITE_4(sc, DC_PN_MII, DC_PN_MIIOPCODE_WRITE | + (phy << 23) | (reg << 10) | data); + for (i = 0; i < DC_TIMEOUT; i++) { + if (!(CSR_READ_4(sc, DC_PN_MII) & DC_PN_MII_BUSY)) + break; + } + return(0); + } + + if (DC_IS_COMET(sc)) { + switch(reg) { + case MII_BMCR: + phy_reg = DC_AL_BMCR; + break; + case MII_BMSR: + phy_reg = DC_AL_BMSR; + break; + case MII_PHYIDR1: + phy_reg = DC_AL_VENID; + break; + case MII_PHYIDR2: + phy_reg = DC_AL_DEVID; + break; + case MII_ANAR: + phy_reg = DC_AL_ANAR; + break; + case MII_ANLPAR: + phy_reg = DC_AL_LPAR; + break; + case MII_ANER: + phy_reg = DC_AL_ANER; + break; + default: + printf("dc%d: phy_write: bad phy register %x\n", + sc->dc_unit, reg); + return(0); + break; + } + + CSR_WRITE_4(sc, phy_reg, data); + return(0); + } + + frame.mii_phyaddr = phy; + frame.mii_regaddr = reg; + frame.mii_data = data; + + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + dc_mii_writereg(sc, &frame); + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + + return(0); +} + +static void dc_miibus_statchg(dev) + device_t dev; +{ + struct dc_softc *sc; + struct mii_data *mii; + + sc = device_get_softc(dev); + if (DC_IS_ADMTEK(sc)) + return; + mii = device_get_softc(sc->dc_miibus); + dc_setcfg(sc, mii->mii_media_active); + sc->dc_if_media = mii->mii_media_active; + + return; +} + +#define DC_POLY 0xEDB88320 +#define DC_BITS 9 +#define DC_BITS_PNIC_II 7 + +static u_int32_t dc_crc_le(sc, addr) + struct dc_softc *sc; + caddr_t addr; +{ + u_int32_t idx, bit, data, crc; + + /* Compute CRC for the address value. */ + crc = 0xFFFFFFFF; /* initial value */ + + for (idx = 0; idx < 6; idx++) { + for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1) + crc = (crc >> 1) ^ (((crc ^ data) & 1) ? DC_POLY : 0); + } + + /* The hash table on the PNIC II is only 128 bits wide. */ + if (DC_IS_PNICII(sc)) + return (crc & ((1 << DC_BITS_PNIC_II) - 1)); + + return (crc & ((1 << DC_BITS) - 1)); +} + +/* + * Calculate CRC of a multicast group address, return the lower 6 bits. + */ +static u_int32_t dc_crc_be(addr) + caddr_t addr; +{ + u_int32_t crc, carry; + int i, j; + u_int8_t c; + + /* Compute CRC for the address value. */ + crc = 0xFFFFFFFF; /* initial value */ + + for (i = 0; i < 6; i++) { + c = *(addr + i); + for (j = 0; j < 8; j++) { + carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01); + crc <<= 1; + c >>= 1; + if (carry) + crc = (crc ^ 0x04c11db6) | carry; + } + } + + /* return the filter bit position */ + return((crc >> 26) & 0x0000003F); +} + +/* + * 21143-style RX filter setup routine. Filter programming is done by + * downloading a special setup frame into the TX engine. 21143, Macronix, + * PNIC, PNIC II and Davicom chips are programmed this way. + * + * We always program the chip using 'hash perfect' mode, i.e. one perfect + * address (our node address) and a 512-bit hash filter for multicast + * frames. We also sneak the broadcast address into the hash filter since + * we need that too. + */ +void dc_setfilt_21143(sc) + struct dc_softc *sc; +{ + struct dc_desc *sframe; + u_int32_t h, *sp; + struct ifmultiaddr *ifma; + struct ifnet *ifp; + int i; + + ifp = &sc->arpcom.ac_if; + + i = sc->dc_cdata.dc_tx_prod; + DC_INC(sc->dc_cdata.dc_tx_prod, DC_TX_LIST_CNT); + sc->dc_cdata.dc_tx_cnt++; + sframe = &sc->dc_ldata->dc_tx_list[i]; + sp = (u_int32_t *)&sc->dc_cdata.dc_sbuf; + bzero((char *)sp, DC_SFRAME_LEN); + + sframe->dc_data = vtophys(&sc->dc_cdata.dc_sbuf); + sframe->dc_ctl = DC_SFRAME_LEN | DC_TXCTL_SETUP | DC_TXCTL_TLINK | + DC_FILTER_HASHPERF | DC_TXCTL_FINT; + + sc->dc_cdata.dc_tx_chain[i] = (struct mbuf *)&sc->dc_cdata.dc_sbuf; + + /* If we want promiscuous mode, set the allframes bit. */ + if (ifp->if_flags & IFF_PROMISC) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + + if (ifp->if_flags & IFF_ALLMULTI) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); + + for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL; + ifma = ifma->ifma_link.le_next) { + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + h = dc_crc_le(sc, + LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); + sp[h >> 4] |= 1 << (h & 0xF); + } + + if (ifp->if_flags & IFF_BROADCAST) { + h = dc_crc_le(sc, (caddr_t)ðerbroadcastaddr); + sp[h >> 4] |= 1 << (h & 0xF); + } + + /* Set our MAC address */ + sp[39] = ((u_int16_t *)sc->arpcom.ac_enaddr)[0]; + sp[40] = ((u_int16_t *)sc->arpcom.ac_enaddr)[1]; + sp[41] = ((u_int16_t *)sc->arpcom.ac_enaddr)[2]; + + sframe->dc_status = DC_TXSTAT_OWN; + CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF); + + /* + * The PNIC takes an exceedingly long time to process its + * setup frame; wait 10ms after posting the setup frame + * before proceeding, just so it has time to swallow its + * medicine. + */ + DELAY(10000); + + ifp->if_timer = 5; + + return; +} + +void dc_setfilt_admtek(sc) + struct dc_softc *sc; +{ + struct ifnet *ifp; + int h = 0; + u_int32_t hashes[2] = { 0, 0 }; + struct ifmultiaddr *ifma; + + ifp = &sc->arpcom.ac_if; + + /* Init our MAC address */ + CSR_WRITE_4(sc, DC_AL_PAR0, *(u_int32_t *)(&sc->arpcom.ac_enaddr[0])); + CSR_WRITE_4(sc, DC_AL_PAR1, *(u_int32_t *)(&sc->arpcom.ac_enaddr[4])); + + /* If we want promiscuous mode, set the allframes bit. */ + if (ifp->if_flags & IFF_PROMISC) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + + if (ifp->if_flags & IFF_ALLMULTI) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); + + /* first, zot all the existing hash bits */ + CSR_WRITE_4(sc, DC_AL_MAR0, 0); + CSR_WRITE_4(sc, DC_AL_MAR1, 0); + + /* + * If we're already in promisc or allmulti mode, we + * don't have to bother programming the multicast filter. + */ + if (ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI)) + return; + + /* now program new ones */ + for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL; + ifma = ifma->ifma_link.le_next) { + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + h = dc_crc_be(LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); + if (h < 32) + hashes[0] |= (1 << h); + else + hashes[1] |= (1 << (h - 32)); + } + + CSR_WRITE_4(sc, DC_AL_MAR0, hashes[0]); + CSR_WRITE_4(sc, DC_AL_MAR1, hashes[1]); + + return; +} + +void dc_setfilt_asix(sc) + struct dc_softc *sc; +{ + struct ifnet *ifp; + int h = 0; + u_int32_t hashes[2] = { 0, 0 }; + struct ifmultiaddr *ifma; + + ifp = &sc->arpcom.ac_if; + + /* Init our MAC address */ + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_PAR0); + CSR_WRITE_4(sc, DC_AX_FILTDATA, + *(u_int32_t *)(&sc->arpcom.ac_enaddr[0])); + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_PAR1); + CSR_WRITE_4(sc, DC_AX_FILTDATA, + *(u_int32_t *)(&sc->arpcom.ac_enaddr[4])); + + /* If we want promiscuous mode, set the allframes bit. */ + if (ifp->if_flags & IFF_PROMISC) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_PROMISC); + + if (ifp->if_flags & IFF_ALLMULTI) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); + else + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_RX_ALLMULTI); + + /* + * The ASIX chip has a special bit to enable reception + * of broadcast frames. + */ + if (ifp->if_flags & IFF_BROADCAST) + DC_SETBIT(sc, DC_NETCFG, DC_AX_NETCFG_RX_BROAD); + else + DC_CLRBIT(sc, DC_NETCFG, DC_AX_NETCFG_RX_BROAD); + + /* first, zot all the existing hash bits */ + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR0); + CSR_WRITE_4(sc, DC_AX_FILTDATA, 0); + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR1); + CSR_WRITE_4(sc, DC_AX_FILTDATA, 0); + + /* + * If we're already in promisc or allmulti mode, we + * don't have to bother programming the multicast filter. + */ + if (ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI)) + return; + + /* now program new ones */ + for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL; + ifma = ifma->ifma_link.le_next) { + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + h = dc_crc_be(LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); + if (h < 32) + hashes[0] |= (1 << h); + else + hashes[1] |= (1 << (h - 32)); + } + + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR0); + CSR_WRITE_4(sc, DC_AX_FILTDATA, hashes[0]); + CSR_WRITE_4(sc, DC_AX_FILTIDX, DC_AX_FILTIDX_MAR1); + CSR_WRITE_4(sc, DC_AX_FILTDATA, hashes[1]); + + return; +} + +static void dc_setfilt(sc) + struct dc_softc *sc; +{ + if (DC_IS_INTEL(sc) || DC_IS_MACRONIX(sc) || DC_IS_PNIC(sc) || + DC_IS_PNICII(sc) || DC_IS_DAVICOM(sc)) + dc_setfilt_21143(sc); + + if (DC_IS_ASIX(sc)) + dc_setfilt_asix(sc); + + if (DC_IS_ADMTEK(sc)) + dc_setfilt_admtek(sc); + + return; +} + +/* + * In order to fiddle with the + * 'full-duplex' and '100Mbps' bits in the netconfig register, we + * first have to put the transmit and/or receive logic in the idle state. + */ +static void dc_setcfg(sc, media) + struct dc_softc *sc; + int media; +{ + int i, restart = 0; + u_int32_t isr; + + if (IFM_SUBTYPE(media) == IFM_NONE) + return; + + if (CSR_READ_4(sc, DC_NETCFG) & (DC_NETCFG_TX_ON|DC_NETCFG_RX_ON)) { + restart = 1; + DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_TX_ON|DC_NETCFG_RX_ON)); + + for (i = 0; i < DC_TIMEOUT; i++) { + DELAY(10); + isr = CSR_READ_4(sc, DC_ISR); + if (isr & DC_ISR_TX_IDLE || + (isr & DC_ISR_RX_STATE) == DC_RXSTATE_STOPPED) + break; + } + + if (i == DC_TIMEOUT) + printf("dc%d: failed to force tx and " + "rx to idle state\n", sc->dc_unit); + + } + + if (IFM_SUBTYPE(media) == IFM_100_TX) { + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_SPEEDSEL); + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_HEARTBEAT); + if (sc->dc_pmode == DC_PMODE_MII) { + DC_SETBIT(sc, DC_WATCHDOG, DC_WDOG_JABBERDIS); + DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_PCS| + DC_NETCFG_PORTSEL|DC_NETCFG_SCRAMBLER)); + if (sc->dc_type == DC_TYPE_98713) + DC_SETBIT(sc, DC_NETCFG, (DC_NETCFG_PCS| + DC_NETCFG_SCRAMBLER)); + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + DC_CLRBIT(sc, DC_10BTCTRL, 0xFFFF); + } else { + if (DC_IS_PNIC(sc)) { + DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_SPEEDSEL); + DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_100TX_LOOP); + DC_SETBIT(sc, DC_PN_NWAY, DC_PN_NWAY_SPEEDSEL); + } + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL| + DC_NETCFG_PCS|DC_NETCFG_SCRAMBLER); + } + } + + if (IFM_SUBTYPE(media) == IFM_10_T) { + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_SPEEDSEL); + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_HEARTBEAT); + if (sc->dc_pmode == DC_PMODE_MII) { + DC_SETBIT(sc, DC_WATCHDOG, DC_WDOG_JABBERDIS); + DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_PCS| + DC_NETCFG_PORTSEL|DC_NETCFG_SCRAMBLER)); + if (sc->dc_type == DC_TYPE_98713) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PCS); + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + DC_CLRBIT(sc, DC_10BTCTRL, 0xFFFF); + } else { + if (DC_IS_PNIC(sc)) { + DC_PN_GPIO_CLRBIT(sc, DC_PN_GPIO_SPEEDSEL); + DC_PN_GPIO_SETBIT(sc, DC_PN_GPIO_100TX_LOOP); + DC_CLRBIT(sc, DC_PN_NWAY, DC_PN_NWAY_SPEEDSEL); + } + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL); + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_SCRAMBLER); + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_PCS); + } + } + + if ((media & IFM_GMASK) == IFM_FDX) { + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX); + if (sc->dc_pmode == DC_PMODE_SYM && DC_IS_PNIC(sc)) + DC_SETBIT(sc, DC_PN_NWAY, DC_PN_NWAY_DUPLEX); + } else { + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX); + if (sc->dc_pmode == DC_PMODE_SYM && DC_IS_PNIC(sc)) + DC_CLRBIT(sc, DC_PN_NWAY, DC_PN_NWAY_DUPLEX); + } + + if (restart) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON|DC_NETCFG_RX_ON); + + return; +} + +static void dc_reset(sc) + struct dc_softc *sc; +{ + register int i; + + DC_SETBIT(sc, DC_BUSCTL, DC_BUSCTL_RESET); + + for (i = 0; i < DC_TIMEOUT; i++) { + DELAY(10); + if (!(CSR_READ_4(sc, DC_BUSCTL) & DC_BUSCTL_RESET)) + break; + } + + if (DC_IS_ASIX(sc) || DC_IS_ADMTEK(sc)) { + DELAY(10000); + DC_CLRBIT(sc, DC_BUSCTL, DC_BUSCTL_RESET); + i = 0; + } + + if (i == DC_TIMEOUT) + printf("dc%d: reset never completed!\n", sc->dc_unit); + + /* Wait a little while for the chip to get its brains in order. */ + DELAY(1000); + + CSR_WRITE_4(sc, DC_IMR, 0x00000000); + CSR_WRITE_4(sc, DC_BUSCTL, 0x00000000); + CSR_WRITE_4(sc, DC_NETCFG, 0x00000000); + + return; +} + +static struct dc_type *dc_devtype(dev) + device_t dev; +{ + struct dc_type *t; + u_int32_t rev; + + t = dc_devs; + + while(t->dc_name != NULL) { + if ((pci_get_vendor(dev) == t->dc_vid) && + (pci_get_device(dev) == t->dc_did)) { + /* Check the PCI revision */ + rev = pci_read_config(dev, DC_PCI_CFRV, 4) & 0xFF; + if (t->dc_did == DC_DEVICEID_98713 && + rev >= DC_REVISION_98713A) + t++; + if (t->dc_did == DC_DEVICEID_98713_CP && + rev >= DC_REVISION_98713A) + t++; + if (t->dc_did == DC_DEVICEID_987x5 && + rev >= DC_REVISION_98725) + t++; + if (t->dc_did == DC_DEVICEID_AX88140A && + rev >= DC_REVISION_88141) + t++; + if (t->dc_did == DC_DEVICEID_82C168 && + rev >= DC_REVISION_82C169) + t++; + return(t); + } + t++; + } + + return(NULL); +} + +/* + * Probe for a 21143 or clone chip. Check the PCI vendor and device + * IDs against our list and return a device name if we find a match. + * We do a little bit of extra work to identify the exact type of + * chip. The MX98713 and MX98713A have the same PCI vendor/device ID, + * but different revision IDs. The same is true for 98715/98715A + * chips and the 98725, as well as the ASIX and ADMtek chips. In some + * cases, the exact chip revision affects driver behavior. + */ +static int dc_probe(dev) + device_t dev; +{ + struct dc_type *t; + + t = dc_devtype(dev); + + if (t != NULL) { + device_set_desc(dev, t->dc_name); + return(0); + } + + return(ENXIO); +} + +static void dc_acpi(dev) + device_t dev; +{ + u_int32_t r, cptr; + int unit; + + unit = device_get_unit(dev); + + /* Find the location of the capabilities block */ + cptr = pci_read_config(dev, DC_PCI_CCAP, 4) & 0xFF; + + r = pci_read_config(dev, cptr, 4) & 0xFF; + if (r == 0x01) { + + r = pci_read_config(dev, cptr + 4, 4); + if (r & DC_PSTATE_D3) { + u_int32_t iobase, membase, irq; + + /* Save important PCI config data. */ + iobase = pci_read_config(dev, DC_PCI_CFBIO, 4); + membase = pci_read_config(dev, DC_PCI_CFBMA, 4); + irq = pci_read_config(dev, DC_PCI_CFIT, 4); + + /* Reset the power state. */ + printf("dc%d: chip is in D%d power mode " + "-- setting to D0\n", unit, r & DC_PSTATE_D3); + r &= 0xFFFFFFFC; + pci_write_config(dev, cptr + 4, r, 4); + + /* Restore PCI config data. */ + pci_write_config(dev, DC_PCI_CFBIO, iobase, 4); + pci_write_config(dev, DC_PCI_CFBMA, membase, 4); + pci_write_config(dev, DC_PCI_CFIT, irq, 4); + } + } + return; +} + +/* + * Attach the interface. Allocate softc structures, do ifmedia + * setup and ethernet/BPF attach. + */ +static int dc_attach(dev) + device_t dev; +{ + int s; + u_char eaddr[ETHER_ADDR_LEN]; + u_int32_t command; + struct dc_softc *sc; + struct ifnet *ifp; + u_int32_t revision; + int unit, error = 0, rid, mac_offset; + + s = splimp(); + + sc = device_get_softc(dev); + unit = device_get_unit(dev); + bzero(sc, sizeof(struct dc_softc)); + + /* + * Handle power management nonsense. + */ + dc_acpi(dev); + + /* + * Map control/status registers. + */ + command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4); + command |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN); + pci_write_config(dev, PCI_COMMAND_STATUS_REG, command, 4); + command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4); + +#ifdef DC_USEIOSPACE + if (!(command & PCIM_CMD_PORTEN)) { + printf("dc%d: failed to enable I/O ports!\n", unit); + error = ENXIO; + goto fail; + } +#else + if (!(command & PCIM_CMD_MEMEN)) { + printf("dc%d: failed to enable memory mapping!\n", unit); + error = ENXIO; + goto fail; + } +#endif + + rid = DC_RID; + sc->dc_res = bus_alloc_resource(dev, DC_RES, &rid, + 0, ~0, 1, RF_ACTIVE); + + if (sc->dc_res == NULL) { + printf("dc%d: couldn't map ports/memory\n", unit); + error = ENXIO; + goto fail; + } + + sc->dc_btag = rman_get_bustag(sc->dc_res); + sc->dc_bhandle = rman_get_bushandle(sc->dc_res); + + /* Allocate interrupt */ + rid = 0; + sc->dc_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, + RF_SHAREABLE | RF_ACTIVE); + + if (sc->dc_irq == NULL) { + printf("dc%d: couldn't map interrupt\n", unit); + bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res); + error = ENXIO; + goto fail; + } + + error = bus_setup_intr(dev, sc->dc_irq, INTR_TYPE_NET, + dc_intr, sc, &sc->dc_intrhand); + + if (error) { + bus_release_resource(dev, SYS_RES_IRQ, 0, sc->dc_irq); + bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res); + printf("dc%d: couldn't set up irq\n", unit); + goto fail; + } + + /* Need this info to decide on a chip type. */ + sc->dc_info = dc_devtype(dev); + revision = pci_read_config(dev, DC_PCI_CFRV, 4) & 0x000000FF; + + switch(sc->dc_info->dc_did) { + case DC_DEVICEID_21143: + sc->dc_type = DC_TYPE_21143; + sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; + sc->dc_flags |= DC_REDUCED_MII_POLL; + break; + case DC_DEVICEID_DM9100: + case DC_DEVICEID_DM9102: + sc->dc_type = DC_TYPE_DM9102; + sc->dc_flags |= DC_TX_USE_TX_INTR; + sc->dc_flags |= DC_REDUCED_MII_POLL; + sc->dc_pmode = DC_PMODE_MII; + break; + case DC_DEVICEID_AL981: + sc->dc_type = DC_TYPE_AL981; + sc->dc_flags |= DC_TX_USE_TX_INTR; + sc->dc_flags |= DC_TX_ADMTEK_WAR; + sc->dc_pmode = DC_PMODE_MII; + break; + case DC_DEVICEID_AN985: + sc->dc_type = DC_TYPE_AN985; + sc->dc_flags |= DC_TX_USE_TX_INTR; + sc->dc_flags |= DC_TX_ADMTEK_WAR; + sc->dc_pmode = DC_PMODE_MII; + break; + case DC_DEVICEID_98713: + case DC_DEVICEID_98713_CP: + if (revision < DC_REVISION_98713A) { + sc->dc_type = DC_TYPE_98713; + sc->dc_flags |= DC_REDUCED_MII_POLL; + } + if (revision >= DC_REVISION_98713A) + sc->dc_type = DC_TYPE_98713A; + sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; + break; + case DC_DEVICEID_987x5: + sc->dc_type = DC_TYPE_987x5; + sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; + break; + case DC_DEVICEID_82C115: + sc->dc_type = DC_TYPE_PNICII; + sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR; + break; + case DC_DEVICEID_82C168: + sc->dc_type = DC_TYPE_PNIC; + sc->dc_flags |= DC_TX_STORENFWD|DC_TX_USE_TX_INTR; + sc->dc_flags |= DC_PNIC_RX_BUG_WAR; + sc->dc_pnic_rx_buf = malloc(DC_RXLEN * 5, M_DEVBUF, M_NOWAIT); + if (revision < DC_REVISION_82C169) + sc->dc_pmode = DC_PMODE_SYM; + break; + case DC_DEVICEID_AX88140A: + sc->dc_type = DC_TYPE_ASIX; + sc->dc_flags |= DC_TX_USE_TX_INTR|DC_TX_INTR_FIRSTFRAG; + sc->dc_flags |= DC_REDUCED_MII_POLL; + sc->dc_pmode = DC_PMODE_MII; + break; + default: + printf("dc%d: unknown device: %x\n", sc->dc_unit, + sc->dc_info->dc_did); + break; + } + + /* Save the cache line size. */ + sc->dc_cachesize = pci_read_config(dev, DC_PCI_CFLT, 4) & 0xFF; + + /* Reset the adapter. */ + dc_reset(sc); + + /* Take 21143 out of snooze mode */ + if (DC_IS_INTEL(sc)) { + command = pci_read_config(dev, DC_PCI_CFDD, 4); + command &= ~(DC_CFDD_SNOOZE_MODE|DC_CFDD_SLEEP_MODE); + pci_write_config(dev, DC_PCI_CFDD, command, 4); + } + + /* + * Try to learn something about the supported media. + * We know that ASIX and ADMtek and Davicom devices + * will *always* be using MII media, so that's a no-brainer. + * The tricky ones are the Macronix/PNIC II and the + * Intel 21143. + */ + if (DC_IS_INTEL(sc)) { + u_int32_t media, cwuc; + cwuc = pci_read_config(dev, DC_PCI_CWUC, 4); + cwuc |= DC_CWUC_FORCE_WUL; + pci_write_config(dev, DC_PCI_CWUC, cwuc, 4); + DELAY(10000); + media = pci_read_config(dev, DC_PCI_CWUC, 4); + cwuc &= ~DC_CWUC_FORCE_WUL; + pci_write_config(dev, DC_PCI_CWUC, cwuc, 4); + DELAY(10000); + if (media & DC_CWUC_MII_ABILITY) + sc->dc_pmode = DC_PMODE_MII; + if (media & DC_CWUC_SYM_ABILITY) + sc->dc_pmode = DC_PMODE_SYM; + /* + * If none of the bits are set, then this NIC + * isn't meant to support 'wake up LAN' mode. + * This is usually only the case on multiport + * cards, and these cards almost always have + * MII transceivers. + */ + if (media == 0) + sc->dc_pmode = DC_PMODE_MII; + } else if (DC_IS_MACRONIX(sc) || DC_IS_PNICII(sc)) { + if (sc->dc_type == DC_TYPE_98713) + sc->dc_pmode = DC_PMODE_MII; + else + sc->dc_pmode = DC_PMODE_SYM; + } else if (!sc->dc_pmode) + sc->dc_pmode = DC_PMODE_MII; + + /* + * Get station address from the EEPROM. + */ + switch(sc->dc_type) { + case DC_TYPE_98713: + case DC_TYPE_98713A: + case DC_TYPE_987x5: + case DC_TYPE_PNICII: + dc_read_eeprom(sc, (caddr_t)&mac_offset, + (DC_EE_NODEADDR_OFFSET / 2), 1, 0); + dc_read_eeprom(sc, (caddr_t)&eaddr, (mac_offset / 2), 3, 0); + break; + case DC_TYPE_PNIC: + dc_read_eeprom(sc, (caddr_t)&eaddr, 0, 3, 1); + break; + case DC_TYPE_DM9102: + case DC_TYPE_21143: + case DC_TYPE_ASIX: + dc_read_eeprom(sc, (caddr_t)&eaddr, DC_EE_NODEADDR, 3, 0); + break; + case DC_TYPE_AL981: + case DC_TYPE_AN985: + dc_read_eeprom(sc, (caddr_t)&eaddr, DC_AL_EE_NODEADDR, 3, 0); + break; + default: + dc_read_eeprom(sc, (caddr_t)&eaddr, DC_EE_NODEADDR, 3, 0); + break; + } + + /* + * A 21143 or clone chip was detected. Inform the world. + */ + printf("dc%d: Ethernet address: %6D\n", unit, eaddr, ":"); + + sc->dc_unit = unit; + bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN); + + sc->dc_ldata = contigmalloc(sizeof(struct dc_list_data), M_DEVBUF, + M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0); + + if (sc->dc_ldata == NULL) { + printf("dc%d: no memory for list buffers!\n", unit); + bus_teardown_intr(dev, sc->dc_irq, sc->dc_intrhand); + bus_release_resource(dev, SYS_RES_IRQ, 0, sc->dc_irq); + bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res); + error = ENXIO; + goto fail; + } + + bzero(sc->dc_ldata, sizeof(struct dc_list_data)); + + ifp = &sc->arpcom.ac_if; + ifp->if_softc = sc; + ifp->if_unit = unit; + ifp->if_name = "dc"; + ifp->if_mtu = ETHERMTU; + ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; + ifp->if_ioctl = dc_ioctl; + ifp->if_output = ether_output; + ifp->if_start = dc_start; + ifp->if_watchdog = dc_watchdog; + ifp->if_init = dc_init; + ifp->if_baudrate = 10000000; + ifp->if_snd.ifq_maxlen = DC_TX_LIST_CNT - 1; + + /* + * Do MII setup. + */ + error = mii_phy_probe(dev, &sc->dc_miibus, + dc_ifmedia_upd, dc_ifmedia_sts); + + if (error && DC_IS_INTEL(sc)) { + sc->dc_pmode = DC_PMODE_SYM; + mii_phy_probe(dev, &sc->dc_miibus, + dc_ifmedia_upd, dc_ifmedia_sts); + error = 0; + } + + if (error) { + printf("dc%d: MII without any PHY!\n", sc->dc_unit); + bus_teardown_intr(dev, sc->dc_irq, sc->dc_intrhand); + bus_release_resource(dev, SYS_RES_IRQ, 0, sc->dc_irq); + bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res); + error = ENXIO; + goto fail; + } + + /* + * Call MI attach routines. + */ + if_attach(ifp); + ether_ifattach(ifp); + callout_handle_init(&sc->dc_stat_ch); + + bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header)); + +fail: + splx(s); + + return(error); +} + +static int dc_detach(dev) + device_t dev; +{ + struct dc_softc *sc; + struct ifnet *ifp; + int s; + + s = splimp(); + + sc = device_get_softc(dev); + ifp = &sc->arpcom.ac_if; + + dc_stop(sc); + if_detach(ifp); + + bus_generic_detach(dev); + device_delete_child(dev, sc->dc_miibus); + + bus_teardown_intr(dev, sc->dc_irq, sc->dc_intrhand); + bus_release_resource(dev, SYS_RES_IRQ, 0, sc->dc_irq); + bus_release_resource(dev, DC_RES, DC_RID, sc->dc_res); + + contigfree(sc->dc_ldata, sizeof(struct dc_list_data), M_DEVBUF); + if (sc->dc_pnic_rx_buf != NULL) + free(sc->dc_pnic_rx_buf, M_DEVBUF); + + splx(s); + + return(0); +} + +/* + * Initialize the transmit descriptors. + */ +static int dc_list_tx_init(sc) + struct dc_softc *sc; +{ + struct dc_chain_data *cd; + struct dc_list_data *ld; + int i; + + cd = &sc->dc_cdata; + ld = sc->dc_ldata; + for (i = 0; i < DC_TX_LIST_CNT; i++) { + if (i == (DC_TX_LIST_CNT - 1)) { + ld->dc_tx_list[i].dc_next = + vtophys(&ld->dc_tx_list[0]); + } else { + ld->dc_tx_list[i].dc_next = + vtophys(&ld->dc_tx_list[i + 1]); + } + cd->dc_tx_chain[i] = NULL; + ld->dc_tx_list[i].dc_data = 0; + ld->dc_tx_list[i].dc_ctl = 0; + } + + cd->dc_tx_prod = cd->dc_tx_cons = cd->dc_tx_cnt = 0; + + return(0); +} + + +/* + * Initialize the RX descriptors and allocate mbufs for them. Note that + * we arrange the descriptors in a closed ring, so that the last descriptor + * points back to the first. + */ +static int dc_list_rx_init(sc) + struct dc_softc *sc; +{ + struct dc_chain_data *cd; + struct dc_list_data *ld; + int i; + + cd = &sc->dc_cdata; + ld = sc->dc_ldata; + + for (i = 0; i < DC_RX_LIST_CNT; i++) { + if (dc_newbuf(sc, i, NULL) == ENOBUFS) + return(ENOBUFS); + if (i == (DC_RX_LIST_CNT - 1)) { + ld->dc_rx_list[i].dc_next = + vtophys(&ld->dc_rx_list[0]); + } else { + ld->dc_rx_list[i].dc_next = + vtophys(&ld->dc_rx_list[i + 1]); + } + } + + cd->dc_rx_prod = 0; + + return(0); +} + +/* + * Initialize an RX descriptor and attach an MBUF cluster. + */ +static int dc_newbuf(sc, i, m) + struct dc_softc *sc; + int i; + struct mbuf *m; +{ + struct mbuf *m_new = NULL; + struct dc_desc *c; + + c = &sc->dc_ldata->dc_rx_list[i]; + + if (m == NULL) { + MGETHDR(m_new, M_DONTWAIT, MT_DATA); + if (m_new == NULL) { + printf("dc%d: no memory for rx list " + "-- packet dropped!\n", sc->dc_unit); + return(ENOBUFS); + } + + MCLGET(m_new, M_DONTWAIT); + if (!(m_new->m_flags & M_EXT)) { + printf("dc%d: no memory for rx list " + "-- packet dropped!\n", sc->dc_unit); + m_freem(m_new); + return(ENOBUFS); + } + m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; + } else { + m_new = m; + m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; + m_new->m_data = m_new->m_ext.ext_buf; + } + + m_adj(m_new, sizeof(u_int64_t)); + + /* + * If this is a PNIC chip, zero the buffer. This is part + * of the workaround for the receive bug in the 82c168 and + * 82c169 chips. + */ + if (sc->dc_flags & DC_PNIC_RX_BUG_WAR) + bzero((char *)mtod(m_new, char *), m_new->m_len); + + sc->dc_cdata.dc_rx_chain[i] = m_new; + c->dc_data = vtophys(mtod(m_new, caddr_t)); + c->dc_ctl = DC_RXCTL_RLINK | DC_RXLEN; + c->dc_status = DC_RXSTAT_OWN; + + return(0); +} + +/* + * Grrrrr. + * The PNIC chip has a terrible bug in it that manifests itself during + * periods of heavy activity. The exact mode of failure if difficult to + * pinpoint: sometimes it only happens in promiscuous mode, sometimes it + * will happen on slow machines. The bug is that sometimes instead of + * uploading one complete frame during reception, it uploads what looks + * like the entire contents of its FIFO memory. The frame we want is at + * the end of the whole mess, but we never know exactly how much data has + * been uploaded, so salvaging the frame is hard. + * + * There is only one way to do it reliably, and it's disgusting. + * Here's what we know: + * + * - We know there will always be somewhere between one and three extra + * descriptors uploaded. + * + * - We know the desired received frame will always be at the end of the + * total data upload. + * + * - We know the size of the desired received frame because it will be + * provided in the length field of the status word in the last descriptor. + * + * Here's what we do: + * + * - When we allocate buffers for the receive ring, we bzero() them. + * This means that we know that the buffer contents should be all + * zeros, except for data uploaded by the chip. + * + * - We also force the PNIC chip to upload frames that include the + * ethernet CRC at the end. + * + * - We gather all of the bogus frame data into a single buffer. + * + * - We then position a pointer at the end of this buffer and scan + * backwards until we encounter the first non-zero byte of data. + * This is the end of the received frame. We know we will encounter + * some data at the end of the frame because the CRC will always be + * there, so even if the sender transmits a packet of all zeros, + * we won't be fooled. + * + * - We know the size of the actual received frame, so we subtract + * that value from the current pointer location. This brings us + * to the start of the actual received packet. + * + * - We copy this into an mbuf and pass it on, along with the actual + * frame length. + * + * The performance hit is tremendous, but it beats dropping frames all + * the time. + */ + +#define DC_WHOLEFRAME (DC_RXSTAT_FIRSTFRAG|DC_RXSTAT_LASTFRAG) +static void dc_pnic_rx_bug_war(sc, idx) + struct dc_softc *sc; + int idx; +{ + struct dc_desc *cur_rx; + struct dc_desc *c = NULL; + struct mbuf *m = NULL; + unsigned char *ptr; + int i, total_len; + u_int32_t rxstat = 0; + + i = sc->dc_pnic_rx_bug_save; + cur_rx = &sc->dc_ldata->dc_rx_list[idx]; + ptr = sc->dc_pnic_rx_buf; + bzero(ptr, sizeof(DC_RXLEN * 5)); + + /* Copy all the bytes from the bogus buffers. */ + while (1) { + c = &sc->dc_ldata->dc_rx_list[i]; + rxstat = c->dc_status; + m = sc->dc_cdata.dc_rx_chain[i]; + bcopy(mtod(m, char *), ptr, DC_RXLEN); + ptr += DC_RXLEN; + /* If this is the last buffer, break out. */ + if (i == idx || rxstat & DC_RXSTAT_LASTFRAG) + break; + dc_newbuf(sc, i, m); + DC_INC(i, DC_RX_LIST_CNT); + } + + /* Find the length of the actual receive frame. */ + total_len = DC_RXBYTES(rxstat); + + /* Scan backwards until we hit a non-zero byte. */ + while(*ptr == 0x00) + ptr--; + + /* Round off. */ + if ((uintptr_t)(ptr) & 0x3) + ptr -= 1; + + /* Now find the start of the frame. */ + ptr -= total_len; + if (ptr < sc->dc_pnic_rx_buf) + ptr = sc->dc_pnic_rx_buf; + + /* + * Now copy the salvaged frame to the last mbuf and fake up + * the status word to make it look like a successful + * frame reception. + */ + dc_newbuf(sc, i, m); + bcopy(ptr, mtod(m, char *), total_len); + cur_rx->dc_status = rxstat | DC_RXSTAT_FIRSTFRAG; + + return; +} + +/* + * A frame has been uploaded: pass the resulting mbuf chain up to + * the higher level protocols. + */ +static void dc_rxeof(sc) + struct dc_softc *sc; +{ + struct ether_header *eh; + struct mbuf *m; + struct ifnet *ifp; + struct dc_desc *cur_rx; + int i, total_len = 0; + u_int32_t rxstat; + + ifp = &sc->arpcom.ac_if; + i = sc->dc_cdata.dc_rx_prod; + + while(!(sc->dc_ldata->dc_rx_list[i].dc_status & DC_RXSTAT_OWN)) { + struct mbuf *m0 = NULL; + + cur_rx = &sc->dc_ldata->dc_rx_list[i]; + rxstat = cur_rx->dc_status; + m = sc->dc_cdata.dc_rx_chain[i]; + total_len = DC_RXBYTES(rxstat); + + if (sc->dc_flags & DC_PNIC_RX_BUG_WAR) { + if ((rxstat & DC_WHOLEFRAME) != DC_WHOLEFRAME) { + if (rxstat & DC_RXSTAT_FIRSTFRAG) + sc->dc_pnic_rx_bug_save = i; + if ((rxstat & DC_RXSTAT_LASTFRAG) == 0) { + DC_INC(i, DC_RX_LIST_CNT); + continue; + } + dc_pnic_rx_bug_war(sc, i); + rxstat = cur_rx->dc_status; + total_len = DC_RXBYTES(rxstat); + } + } + + sc->dc_cdata.dc_rx_chain[i] = NULL; + + /* + * If an error occurs, update stats, clear the + * status word and leave the mbuf cluster in place: + * it should simply get re-used next time this descriptor + * comes up in the ring. + */ + if (rxstat & DC_RXSTAT_RXERR) { + ifp->if_ierrors++; + if (rxstat & DC_RXSTAT_COLLSEEN) + ifp->if_collisions++; + dc_newbuf(sc, i, m); + if (rxstat & DC_RXSTAT_CRCERR) { + DC_INC(i, DC_RX_LIST_CNT); + continue; + } else { + dc_init(sc); + return; + } + } + + /* No errors; receive the packet. */ + total_len -= ETHER_CRC_LEN; + + m0 = m_devget(mtod(m, char *) - ETHER_ALIGN, + total_len + ETHER_ALIGN, 0, ifp, NULL); + dc_newbuf(sc, i, m); + DC_INC(i, DC_RX_LIST_CNT); + if (m0 == NULL) { + ifp->if_ierrors++; + continue; + } + m_adj(m0, ETHER_ALIGN); + m = m0; + + ifp->if_ipackets++; + eh = mtod(m, struct ether_header *); + + /* + * Handle BPF listeners. Let the BPF user see the packet, but + * don't pass it up to the ether_input() layer unless it's + * a broadcast packet, multicast packet, matches our ethernet + * address or the interface is in promiscuous mode. + */ + if (ifp->if_bpf) { + bpf_mtap(ifp, m); + if (ifp->if_flags & IFF_PROMISC && + (bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr, + ETHER_ADDR_LEN) && + (eh->ether_dhost[0] & 1) == 0)) { + m_freem(m); + continue; + } + } + + /* Remove header from mbuf and pass it on. */ + m_adj(m, sizeof(struct ether_header)); + ether_input(ifp, eh, m); + } + + sc->dc_cdata.dc_rx_prod = i; + + return; +} + +/* + * A frame was downloaded to the chip. It's safe for us to clean up + * the list buffers. + */ + +static void dc_txeof(sc) + struct dc_softc *sc; +{ + struct dc_desc *cur_tx = NULL; + struct ifnet *ifp; + int idx; + + ifp = &sc->arpcom.ac_if; + + /* Clear the timeout timer. */ + ifp->if_timer = 0; + + /* + * Go through our tx list and free mbufs for those + * frames that have been transmitted. + */ + idx = sc->dc_cdata.dc_tx_cons; + while(idx != sc->dc_cdata.dc_tx_prod) { + u_int32_t txstat; + + cur_tx = &sc->dc_ldata->dc_tx_list[idx]; + txstat = cur_tx->dc_status; + + if (txstat & DC_TXSTAT_OWN) + break; + + if (!(cur_tx->dc_ctl & DC_TXCTL_LASTFRAG) || + cur_tx->dc_ctl & DC_TXCTL_SETUP) { + sc->dc_cdata.dc_tx_cnt--; + if (cur_tx->dc_ctl & DC_TXCTL_SETUP) { + /* + * Yes, the PNIC is so brain damaged + * that it will sometimes generate a TX + * underrun error while DMAing the RX + * filter setup frame. If we detect this, + * we have to send the setup frame again, + * or else the filter won't be programmed + * correctly. + */ + if (DC_IS_PNIC(sc)) { + if (txstat & DC_TXSTAT_ERRSUM) + dc_setfilt(sc); + } + sc->dc_cdata.dc_tx_chain[idx] = NULL; + } + DC_INC(idx, DC_TX_LIST_CNT); + continue; + } + + if (/*sc->dc_type == DC_TYPE_21143 &&*/ + sc->dc_pmode == DC_PMODE_MII && + ((txstat & 0xFFFF) & ~(DC_TXSTAT_ERRSUM| + DC_TXSTAT_NOCARRIER|DC_TXSTAT_CARRLOST))) + txstat &= ~DC_TXSTAT_ERRSUM; + + if (txstat & DC_TXSTAT_ERRSUM) { + ifp->if_oerrors++; + if (txstat & DC_TXSTAT_EXCESSCOLL) + ifp->if_collisions++; + if (txstat & DC_TXSTAT_LATECOLL) + ifp->if_collisions++; + if (!(txstat & DC_TXSTAT_UNDERRUN)) { + dc_init(sc); + return; + } + } + + ifp->if_collisions += (txstat & DC_TXSTAT_COLLCNT) >> 3; + + ifp->if_opackets++; + if (sc->dc_cdata.dc_tx_chain[idx] != NULL) { + m_freem(sc->dc_cdata.dc_tx_chain[idx]); + sc->dc_cdata.dc_tx_chain[idx] = NULL; + } + + sc->dc_cdata.dc_tx_cnt--; + DC_INC(idx, DC_TX_LIST_CNT); + } + + sc->dc_cdata.dc_tx_cons = idx; + if (cur_tx != NULL) + ifp->if_flags &= ~IFF_OACTIVE; + + return; +} + +static void dc_tick(xsc) + void *xsc; +{ + struct dc_softc *sc; + struct mii_data *mii; + struct ifnet *ifp; + int s; + u_int32_t r; + + s = splimp(); + + sc = xsc; + ifp = &sc->arpcom.ac_if; + mii = device_get_softc(sc->dc_miibus); + + if (sc->dc_flags & DC_REDUCED_MII_POLL) { + r = CSR_READ_4(sc, DC_ISR); + if (DC_IS_INTEL(sc)) { + if (r & DC_ISR_LINKFAIL) { + sc->dc_link = 0; + mii_tick(mii); + } + } else { + if ((r & DC_ISR_RX_STATE) == DC_RXSTATE_WAIT && + sc->dc_cdata.dc_tx_prod == 0) + mii_tick(mii); + } + } else + mii_tick(mii); + + /* + * When the init routine completes, we expect to be able to send + * packets right away, and in fact the network code will send a + * gratuitous ARP the moment the init routine marks the interface + * as running. However, even though the MAC may have been initialized, + * there may be a delay of a few seconds before the PHY completes + * autonegotiation and the link is brought up. Any transmissions + * made during that delay will be lost. Dealing with this is tricky: + * we can't just pause in the init routine while waiting for the + * PHY to come ready since that would bring the whole system to + * a screeching halt for several seconds. + * + * What we do here is prevent the TX start routine from sending + * any packets until a link has been established. After the + * interface has been initialized, the tick routine will poll + * the state of the PHY until the IFM_ACTIVE flag is set. Until + * that time, packets will stay in the send queue, and once the + * link comes up, they will be flushed out to the wire. + */ + if (!sc->dc_link) { + mii_pollstat(mii); + if (mii->mii_media_status & IFM_ACTIVE && + IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { + sc->dc_link++; + if (ifp->if_snd.ifq_head != NULL) + dc_start(ifp); + } + } + + sc->dc_stat_ch = timeout(dc_tick, sc, hz); + + splx(s); + + return; +} + +static void dc_intr(arg) + void *arg; +{ + struct dc_softc *sc; + struct ifnet *ifp; + u_int32_t status; + + sc = arg; + ifp = &sc->arpcom.ac_if; + + /* Supress unwanted interrupts */ + if (!(ifp->if_flags & IFF_UP)) { + if (CSR_READ_4(sc, DC_ISR) & DC_INTRS) + dc_stop(sc); + return; + } + + /* Disable interrupts. */ + CSR_WRITE_4(sc, DC_IMR, 0x00000000); + + while((status = CSR_READ_4(sc, DC_ISR)) & DC_INTRS) { + + CSR_WRITE_4(sc, DC_ISR, status); + + if (status & DC_ISR_RX_OK) + dc_rxeof(sc); + + if (status & (DC_ISR_TX_OK|DC_ISR_TX_NOBUF)) + dc_txeof(sc); + + if (status & DC_ISR_TX_IDLE) { + dc_txeof(sc); + if (sc->dc_cdata.dc_tx_cnt) { + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON); + CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF); + } + } + + if (status & DC_ISR_TX_UNDERRUN) { + u_int32_t cfg; + + printf("dc%d: TX underrun -- ", sc->dc_unit); + if (DC_IS_DAVICOM(sc) || DC_IS_INTEL(sc)) + dc_init(sc); + cfg = CSR_READ_4(sc, DC_NETCFG); + cfg &= ~DC_NETCFG_TX_THRESH; + if (sc->dc_txthresh == DC_TXTHRESH_160BYTES) { + printf("using store and forward mode\n"); + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD); + } else { + sc->dc_txthresh += 0x4000; + printf("increasing TX threshold\n"); + CSR_WRITE_4(sc, DC_NETCFG, cfg); + DC_SETBIT(sc, DC_NETCFG, sc->dc_txthresh); + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD); + } + } + + if ((status & DC_ISR_RX_WATDOGTIMEO) + || (status & DC_ISR_RX_NOBUF)) + dc_rxeof(sc); + + if (status & DC_ISR_BUS_ERR) { + dc_reset(sc); + dc_init(sc); + } + } + + /* Re-enable interrupts. */ + CSR_WRITE_4(sc, DC_IMR, DC_INTRS); + + if (ifp->if_snd.ifq_head != NULL) + dc_start(ifp); + + return; +} + +/* + * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data + * pointers to the fragment pointers. + */ +static int dc_encap(sc, m_head, txidx) + struct dc_softc *sc; + struct mbuf *m_head; + u_int32_t *txidx; +{ + struct dc_desc *f = NULL; + struct mbuf *m; + int frag, cur, cnt = 0; + + /* + * Start packing the mbufs in this chain into + * the fragment pointers. Stop when we run out + * of fragments or hit the end of the mbuf chain. + */ + m = m_head; + cur = frag = *txidx; + + for (m = m_head; m != NULL; m = m->m_next) { + if (m->m_len != 0) { + if (sc->dc_flags & DC_TX_ADMTEK_WAR) { + if (*txidx != sc->dc_cdata.dc_tx_prod && + frag == (DC_TX_LIST_CNT - 1)) + return(ENOBUFS); + } + if ((DC_TX_LIST_CNT - + (sc->dc_cdata.dc_tx_cnt + cnt)) < 5) + return(ENOBUFS); + + f = &sc->dc_ldata->dc_tx_list[frag]; + f->dc_ctl = DC_TXCTL_TLINK | m->m_len; + if (cnt == 0) { + f->dc_status = 0; + f->dc_ctl |= DC_TXCTL_FIRSTFRAG; + } else + f->dc_status = DC_TXSTAT_OWN; + f->dc_data = vtophys(mtod(m, vm_offset_t)); + cur = frag; + DC_INC(frag, DC_TX_LIST_CNT); + cnt++; + } + } + + if (m != NULL) + return(ENOBUFS); + + sc->dc_cdata.dc_tx_cnt += cnt; + sc->dc_cdata.dc_tx_chain[cur] = m_head; + sc->dc_ldata->dc_tx_list[cur].dc_ctl |= DC_TXCTL_LASTFRAG; + if (sc->dc_flags & DC_TX_INTR_FIRSTFRAG) + sc->dc_ldata->dc_tx_list[*txidx].dc_ctl |= DC_TXCTL_FINT; + if (sc->dc_flags & DC_TX_USE_TX_INTR && sc->dc_cdata.dc_tx_cnt > 64) + sc->dc_ldata->dc_tx_list[cur].dc_ctl |= DC_TXCTL_FINT; + sc->dc_ldata->dc_tx_list[*txidx].dc_status = DC_TXSTAT_OWN; + *txidx = frag; + + return(0); +} + +/* + * Main transmit routine. To avoid having to do mbuf copies, we put pointers + * to the mbuf data regions directly in the transmit lists. We also save a + * copy of the pointers since the transmit list fragment pointers are + * physical addresses. + */ + +static void dc_start(ifp) + struct ifnet *ifp; +{ + struct dc_softc *sc; + struct mbuf *m_head = NULL; + int idx; + + sc = ifp->if_softc; + + if (!sc->dc_link) + return; + + if (ifp->if_flags & IFF_OACTIVE) + return; + + idx = sc->dc_cdata.dc_tx_prod; + + while(sc->dc_cdata.dc_tx_chain[idx] == NULL) { + IF_DEQUEUE(&ifp->if_snd, m_head); + if (m_head == NULL) + break; + + if (dc_encap(sc, m_head, &idx)) { + IF_PREPEND(&ifp->if_snd, m_head); + ifp->if_flags |= IFF_OACTIVE; + break; + } + + /* + * If there's a BPF listener, bounce a copy of this frame + * to him. + */ + if (ifp->if_bpf) + bpf_mtap(ifp, m_head); + } + + /* Transmit */ + sc->dc_cdata.dc_tx_prod = idx; + if (!(sc->dc_flags & DC_TX_POLL)) + CSR_WRITE_4(sc, DC_TXSTART, 0xFFFFFFFF); + + /* + * Set a timeout in case the chip goes out to lunch. + */ + ifp->if_timer = 5; + + return; +} + +static void dc_init(xsc) + void *xsc; +{ + struct dc_softc *sc = xsc; + struct ifnet *ifp = &sc->arpcom.ac_if; + struct mii_data *mii; + int s; + + s = splimp(); + + mii = device_get_softc(sc->dc_miibus); + + /* + * Cancel pending I/O and free all RX/TX buffers. + */ + dc_stop(sc); + dc_reset(sc); + + /* + * Set cache alignment and burst length. + */ + if (DC_IS_ASIX(sc)) + CSR_WRITE_4(sc, DC_BUSCTL, 0); + else + CSR_WRITE_4(sc, DC_BUSCTL, DC_BUSCTL_MRME|DC_BUSCTL_MRLE); + if (DC_IS_DAVICOM(sc) || DC_IS_INTEL(sc)) { + DC_SETBIT(sc, DC_BUSCTL, DC_BURSTLEN_USECA); + } else { + DC_SETBIT(sc, DC_BUSCTL, DC_BURSTLEN_16LONG); + } + if (sc->dc_flags & DC_TX_POLL) + DC_SETBIT(sc, DC_BUSCTL, DC_TXPOLL_1); + switch(sc->dc_cachesize) { + case 32: + DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_32LONG); + break; + case 16: + DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_16LONG); + break; + case 8: + DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_8LONG); + break; + case 0: + default: + DC_SETBIT(sc, DC_BUSCTL, DC_CACHEALIGN_NONE); + break; + } + + if (sc->dc_flags & DC_TX_STORENFWD) + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD); + else { + if (sc->dc_txthresh == DC_TXTHRESH_160BYTES) { + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD); + } else { + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_STORENFWD); + DC_SETBIT(sc, DC_NETCFG, sc->dc_txthresh); + } + } + + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_NO_RXCRC); + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_BACKOFF); + + if (DC_IS_MACRONIX(sc) || DC_IS_PNICII(sc)) { + /* + * The app notes for the 98713 and 98715A say that + * in order to have the chips operate properly, a magic + * number must be written to CSR16. Macronix does not + * document the meaning of these bits so there's no way + * to know exactly what they do. The 98713 has a magic + * number all its own; the rest all use a different one. + */ + DC_CLRBIT(sc, DC_MX_MAGICPACKET, 0xFFFF0000); + if (sc->dc_type == DC_TYPE_98713) + DC_SETBIT(sc, DC_MX_MAGICPACKET, DC_MX_MAGIC_98713); + else + DC_SETBIT(sc, DC_MX_MAGICPACKET, DC_MX_MAGIC_98715); + } + + DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_TX_THRESH); + DC_SETBIT(sc, DC_NETCFG, DC_TXTHRESH_72BYTES); + + /* Init circular RX list. */ + if (dc_list_rx_init(sc) == ENOBUFS) { + printf("dc%d: initialization failed: no " + "memory for rx buffers\n", sc->dc_unit); + dc_stop(sc); + (void)splx(s); + return; + } + + /* + * Init tx descriptors. + */ + dc_list_tx_init(sc); + + /* + * Load the address of the RX list. + */ + CSR_WRITE_4(sc, DC_RXADDR, vtophys(&sc->dc_ldata->dc_rx_list[0])); + CSR_WRITE_4(sc, DC_TXADDR, vtophys(&sc->dc_ldata->dc_tx_list[0])); + + /* + * Enable interrupts. + */ + CSR_WRITE_4(sc, DC_IMR, DC_INTRS); + CSR_WRITE_4(sc, DC_ISR, 0xFFFFFFFF); + + /* Enable transmitter. */ + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_TX_ON); + + /* + * Load the RX/multicast filter. We do this sort of late + * because the filter programming scheme on the 21143 and + * some clones requires DMAing a setup frame via the TX + * engine, and we need the transmitter enabled for that. + */ + dc_setfilt(sc); + + /* Enable receiver. */ + DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_RX_ON); + CSR_WRITE_4(sc, DC_RXSTART, 0xFFFFFFFF); + + mii_mediachg(mii); + dc_setcfg(sc, sc->dc_if_media); + + ifp->if_flags |= IFF_RUNNING; + ifp->if_flags &= ~IFF_OACTIVE; + + (void)splx(s); + + sc->dc_stat_ch = timeout(dc_tick, sc, hz); + + return; +} + +/* + * Set media options. + */ +static int dc_ifmedia_upd(ifp) + struct ifnet *ifp; +{ + struct dc_softc *sc; + struct mii_data *mii; + + sc = ifp->if_softc; + mii = device_get_softc(sc->dc_miibus); + mii_mediachg(mii); + sc->dc_link = 0; + + return(0); +} + +/* + * Report current media status. + */ +static void dc_ifmedia_sts(ifp, ifmr) + struct ifnet *ifp; + struct ifmediareq *ifmr; +{ + struct dc_softc *sc; + struct mii_data *mii; + + sc = ifp->if_softc; + mii = device_get_softc(sc->dc_miibus); + mii_pollstat(mii); + ifmr->ifm_active = mii->mii_media_active; + ifmr->ifm_status = mii->mii_media_status; + + return; +} + +static int dc_ioctl(ifp, command, data) + struct ifnet *ifp; + u_long command; + caddr_t data; +{ + struct dc_softc *sc = ifp->if_softc; + struct ifreq *ifr = (struct ifreq *) data; + struct mii_data *mii; + int s, error = 0; + + s = splimp(); + + switch(command) { + case SIOCSIFADDR: + case SIOCGIFADDR: + case SIOCSIFMTU: + error = ether_ioctl(ifp, command, data); + break; + case SIOCSIFFLAGS: + if (ifp->if_flags & IFF_UP) { + if (ifp->if_flags & IFF_RUNNING && + ifp->if_flags & IFF_PROMISC && + !(sc->dc_if_flags & IFF_PROMISC)) { + dc_setfilt(sc); + } else if (ifp->if_flags & IFF_RUNNING && + !(ifp->if_flags & IFF_PROMISC) && + sc->dc_if_flags & IFF_PROMISC) { + dc_setfilt(sc); + } else if (!(ifp->if_flags & IFF_RUNNING)) { + sc->dc_txthresh = 0; + dc_init(sc); + } + } else { + if (ifp->if_flags & IFF_RUNNING) + dc_stop(sc); + } + sc->dc_if_flags = ifp->if_flags; + error = 0; + break; + case SIOCADDMULTI: + case SIOCDELMULTI: + dc_setfilt(sc); + error = 0; + break; + case SIOCGIFMEDIA: + case SIOCSIFMEDIA: + mii = device_get_softc(sc->dc_miibus); + error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); + break; + default: + error = EINVAL; + break; + } + + (void)splx(s); + + return(error); +} + +static void dc_watchdog(ifp) + struct ifnet *ifp; +{ + struct dc_softc *sc; + + sc = ifp->if_softc; + + ifp->if_oerrors++; + printf("dc%d: watchdog timeout\n", sc->dc_unit); + + dc_stop(sc); + dc_reset(sc); + dc_init(sc); + + if (ifp->if_snd.ifq_head != NULL) + dc_start(ifp); + + return; +} + +/* + * Stop the adapter and free any mbufs allocated to the + * RX and TX lists. + */ +static void dc_stop(sc) + struct dc_softc *sc; +{ + register int i; + struct ifnet *ifp; + + ifp = &sc->arpcom.ac_if; + ifp->if_timer = 0; + + untimeout(dc_tick, sc, sc->dc_stat_ch); + + DC_CLRBIT(sc, DC_NETCFG, (DC_NETCFG_RX_ON|DC_NETCFG_TX_ON)); + CSR_WRITE_4(sc, DC_IMR, 0x00000000); + CSR_WRITE_4(sc, DC_TXADDR, 0x00000000); + CSR_WRITE_4(sc, DC_RXADDR, 0x00000000); + sc->dc_link = 0; + + /* + * Free data in the RX lists. + */ + for (i = 0; i < DC_RX_LIST_CNT; i++) { + if (sc->dc_cdata.dc_rx_chain[i] != NULL) { + m_freem(sc->dc_cdata.dc_rx_chain[i]); + sc->dc_cdata.dc_rx_chain[i] = NULL; + } + } + bzero((char *)&sc->dc_ldata->dc_rx_list, + sizeof(sc->dc_ldata->dc_rx_list)); + + /* + * Free the TX list buffers. + */ + for (i = 0; i < DC_TX_LIST_CNT; i++) { + if (sc->dc_cdata.dc_tx_chain[i] != NULL) { + if (sc->dc_ldata->dc_tx_list[i].dc_ctl & + DC_TXCTL_SETUP) { + sc->dc_cdata.dc_tx_chain[i] = NULL; + continue; + } + m_freem(sc->dc_cdata.dc_tx_chain[i]); + sc->dc_cdata.dc_tx_chain[i] = NULL; + } + } + + bzero((char *)&sc->dc_ldata->dc_tx_list, + sizeof(sc->dc_ldata->dc_tx_list)); + + ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); + + return; +} + +/* + * Stop all chip I/O so that the kernel's probe routines don't + * get confused by errant DMAs when rebooting. + */ +static void dc_shutdown(dev) + device_t dev; +{ + struct dc_softc *sc; + + sc = device_get_softc(dev); + + dc_stop(sc); + + return; +} |
