diff options
Diffstat (limited to 'sys/dev/ath/ath_hal/ar5312/ar5312_misc.c')
-rw-r--r-- | sys/dev/ath/ath_hal/ar5312/ar5312_misc.c | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/sys/dev/ath/ath_hal/ar5312/ar5312_misc.c b/sys/dev/ath/ath_hal/ar5312/ar5312_misc.c new file mode 100644 index 0000000..7928318 --- /dev/null +++ b/sys/dev/ath/ath_hal/ar5312/ar5312_misc.c @@ -0,0 +1,168 @@ +/* + * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting + * Copyright (c) 2002-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + * $Id: ar5312_misc.c,v 1.4 2008/11/22 07:40:15 sam Exp $ + */ +#include "opt_ah.h" + +#ifdef AH_SUPPORT_AR5312 + +#include "ah.h" +#include "ah_internal.h" +#include "ah_devid.h" + +#include "ar5312/ar5312.h" +#include "ar5312/ar5312reg.h" +#include "ar5312/ar5312phy.h" + +#define AR_NUM_GPIO 6 /* 6 GPIO pins */ +#define AR_GPIOD_MASK 0x0000002F /* GPIO data reg r/w mask */ + +/* + * Change the LED blinking pattern to correspond to the connectivity + */ +void +ar5312SetLedState(struct ath_hal *ah, HAL_LED_STATE state) +{ + uint32_t val; + uint32_t resOffset = (AR5312_RSTIMER_BASE - ((uint32_t) ah->ah_sh)); + if(IS_2316(ah)) return; /* not yet */ + val = SM(AR5312_PCICFG_LEDSEL0, AR5312_PCICFG_LEDSEL) | + SM(AR5312_PCICFG_LEDMOD0, AR5312_PCICFG_LEDMODE) | + 2; + OS_REG_WRITE(ah, resOffset+AR5312_PCICFG, + (OS_REG_READ(ah, AR5312_PCICFG) &~ + (AR5312_PCICFG_LEDSEL | AR5312_PCICFG_LEDMODE | + AR5312_PCICFG_LEDSBR)) + | val); +} + +/* + * Detect if our wireless mac is present. + */ +HAL_BOOL +ar5312DetectCardPresent(struct ath_hal *ah) +{ + uint16_t macVersion, macRev; + uint32_t v; + + /* + * Read the Silicon Revision register and compare that + * to what we read at attach time. If the same, we say + * a card/device is present. + */ +#if (AH_SUPPORT_2316 || AH_SUPPORT_2317) + if(IS_5315(ah)) + { + v = (OS_REG_READ(ah, + (AR5315_RSTIMER_BASE-((uint32_t) ah->ah_sh)) + AR5315_WREV)) + & AR_SREV_ID; + macVersion = v >> AR_SREV_ID_S; + macRev = v & AR_SREV_REVISION; + return (AH_PRIVATE(ah)->ah_macVersion == macVersion && + AH_PRIVATE(ah)->ah_macRev == macRev); + } + else +#endif + { + v = (OS_REG_READ(ah, + (AR5312_RSTIMER_BASE-((uint32_t) ah->ah_sh)) + AR5312_WREV)) + & AR_SREV_ID; + macVersion = v >> AR_SREV_ID_S; + macRev = v & AR_SREV_REVISION; + return (AH_PRIVATE(ah)->ah_macVersion == macVersion && + AH_PRIVATE(ah)->ah_macRev == macRev); + } +} + +/* + * If 32KHz clock exists, use it to lower power consumption during sleep + * + * Note: If clock is set to 32 KHz, delays on accessing certain + * baseband registers (27-31, 124-127) are required. + */ +void +ar5312SetupClock(struct ath_hal *ah, HAL_OPMODE opmode) +{ + if (ar5212Use32KHzclock(ah, opmode)) { + /* + * Enable clocks to be turned OFF in BB during sleep + * and also enable turning OFF 32MHz/40MHz Refclk + * from A2. + */ + OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f); + OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT, 0x0d); + OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0c); + OS_REG_WRITE(ah, AR_PHY_M_SLEEP, 0x03); + OS_REG_WRITE(ah, AR_PHY_REFCLKDLY, 0x05); + OS_REG_WRITE(ah, AR_PHY_REFCLKPD, + IS_RAD5112_ANY(ah) ? 0x14 : 0x18); + + OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32, 1); + OS_REG_WRITE(ah, AR_TSF_PARM, 61); /* 32 KHz TSF incr */ + + } else { + OS_REG_WRITE(ah, AR_TSF_PARM, 1); /* 32 MHz TSF incr */ + OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32, + IS_RAD5112_ANY(ah) ? 39 : 31); + + OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f); + OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT, 0x7f); + + if (IS_5312_2_X(ah)) { + /* Set ADC/DAC select values */ + OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x04); + } else { + OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e); + OS_REG_WRITE(ah, AR_PHY_M_SLEEP, 0x0c); + OS_REG_WRITE(ah, AR_PHY_REFCLKDLY, 0xff); + OS_REG_WRITE(ah, AR_PHY_REFCLKPD, + IS_RAD5112_ANY(ah) ? 0x14 : 0x18); + } + } +} + +/* + * If 32KHz clock exists, turn it off and turn back on the 32Mhz + */ +void +ar5312RestoreClock(struct ath_hal *ah, HAL_OPMODE opmode) +{ + if (ar5212Use32KHzclock(ah, opmode)) { + /* # Set sleep clock rate back to 32 MHz. */ + OS_REG_WRITE(ah, AR_TSF_PARM, 1); /* 32 MHz TSF incr */ + OS_REG_RMW_FIELD(ah, AR_USEC, AR_USEC_USEC32, + IS_RAD5112_ANY(ah) ? 39 : 31); + + /* + * Restore BB registers to power-on defaults + */ + OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_CONTROL, 0x1f); + OS_REG_WRITE(ah, AR_PHY_SLEEP_CTR_LIMIT, 0x7f); + if (IS_5312_2_X(ah)) { + /* Set ADC/DAC select values */ + OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x04); + } else { + OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e); + OS_REG_WRITE(ah, AR_PHY_M_SLEEP, 0x0c); + OS_REG_WRITE(ah, AR_PHY_REFCLKDLY, 0xff); + OS_REG_WRITE(ah, AR_PHY_REFCLKPD, + IS_RAD5112_ANY(ah) ? 0x14 : 0x18); + } + } +} + +#endif /* AH_SUPPORT_AR5312 */ |