diff options
Diffstat (limited to 'sys/contrib/dev/acpica/components/namespace/nsarguments.c')
| -rw-r--r-- | sys/contrib/dev/acpica/components/namespace/nsarguments.c | 303 |
1 files changed, 303 insertions, 0 deletions
diff --git a/sys/contrib/dev/acpica/components/namespace/nsarguments.c b/sys/contrib/dev/acpica/components/namespace/nsarguments.c new file mode 100644 index 0000000..52ab8a9 --- /dev/null +++ b/sys/contrib/dev/acpica/components/namespace/nsarguments.c @@ -0,0 +1,303 @@ +/****************************************************************************** + * + * Module Name: nsarguments - Validation of args for ACPI predefined methods + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2013, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <contrib/dev/acpica/include/acpi.h> +#include <contrib/dev/acpica/include/accommon.h> +#include <contrib/dev/acpica/include/acnamesp.h> +#include <contrib/dev/acpica/include/acpredef.h> + + +#define _COMPONENT ACPI_NAMESPACE + ACPI_MODULE_NAME ("nsarguments") + + +/******************************************************************************* + * + * FUNCTION: AcpiNsCheckArgumentTypes + * + * PARAMETERS: Info - Method execution information block + * + * RETURN: None + * + * DESCRIPTION: Check the incoming argument count and all argument types + * against the argument type list for a predefined name. + * + ******************************************************************************/ + +void +AcpiNsCheckArgumentTypes ( + ACPI_EVALUATE_INFO *Info) +{ + UINT16 ArgTypeList; + UINT8 ArgCount; + UINT8 ArgType; + UINT8 UserArgType; + UINT32 i; + + + /* If not a predefined name, cannot typecheck args */ + + if (!Info->Predefined) + { + return; + } + + ArgTypeList = Info->Predefined->Info.ArgumentList; + ArgCount = METHOD_GET_ARG_COUNT (ArgTypeList); + + /* Typecheck all arguments */ + + for (i = 0; ((i < ArgCount) && (i < Info->ParamCount)); i++) + { + ArgType = METHOD_GET_NEXT_TYPE (ArgTypeList); + UserArgType = Info->Parameters[i]->Common.Type; + + if (UserArgType != ArgType) + { + ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, ACPI_WARN_ALWAYS, + "Argument #%u type mismatch - " + "Found [%s], ACPI requires [%s]", (i + 1), + AcpiUtGetTypeName (UserArgType), + AcpiUtGetTypeName (ArgType))); + } + } +} + + +/******************************************************************************* + * + * FUNCTION: AcpiNsCheckAcpiCompliance + * + * PARAMETERS: Pathname - Full pathname to the node (for error msgs) + * Node - Namespace node for the method/object + * Predefined - Pointer to entry in predefined name table + * + * RETURN: None + * + * DESCRIPTION: Check that the declared parameter count (in ASL/AML) for a + * predefined name is what is expected (matches what is defined in + * the ACPI specification for this predefined name.) + * + ******************************************************************************/ + +void +AcpiNsCheckAcpiCompliance ( + char *Pathname, + ACPI_NAMESPACE_NODE *Node, + const ACPI_PREDEFINED_INFO *Predefined) +{ + UINT32 AmlParamCount; + UINT32 RequiredParamCount; + + + if (!Predefined) + { + return; + } + + /* Get the ACPI-required arg count from the predefined info table */ + + RequiredParamCount = METHOD_GET_ARG_COUNT (Predefined->Info.ArgumentList); + + /* + * If this object is not a control method, we can check if the ACPI + * spec requires that it be a method. + */ + if (Node->Type != ACPI_TYPE_METHOD) + { + if (RequiredParamCount > 0) + { + /* Object requires args, must be implemented as a method */ + + ACPI_BIOS_ERROR_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS, + "Object (%s) must be a control method with %u arguments", + AcpiUtGetTypeName (Node->Type), RequiredParamCount)); + } + else if (!RequiredParamCount && !Predefined->Info.ExpectedBtypes) + { + /* Object requires no args and no return value, must be a method */ + + ACPI_BIOS_ERROR_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS, + "Object (%s) must be a control method " + "with no arguments and no return value", + AcpiUtGetTypeName (Node->Type))); + } + + return; + } + + /* + * This is a control method. + * Check that the ASL/AML-defined parameter count for this method + * matches the ACPI-required parameter count + * + * Some methods are allowed to have a "minimum" number of args (_SCP) + * because their definition in ACPI has changed over time. + * + * Note: These are BIOS errors in the declaration of the object + */ + AmlParamCount = Node->Object->Method.ParamCount; + + if (AmlParamCount < RequiredParamCount) + { + ACPI_BIOS_ERROR_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "ASL declared %u, ACPI requires %u", + AmlParamCount, RequiredParamCount)); + } + else if ((AmlParamCount > RequiredParamCount) && + !(Predefined->Info.ArgumentList & ARG_COUNT_IS_MINIMUM)) + { + ACPI_BIOS_ERROR_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS, + "Excess arguments - " + "ASL declared %u, ACPI requires %u", + AmlParamCount, RequiredParamCount)); + } +} + + +/******************************************************************************* + * + * FUNCTION: AcpiNsCheckArgumentCount + * + * PARAMETERS: Pathname - Full pathname to the node (for error msgs) + * Node - Namespace node for the method/object + * UserParamCount - Number of args passed in by the caller + * Predefined - Pointer to entry in predefined name table + * + * RETURN: None + * + * DESCRIPTION: Check that incoming argument count matches the declared + * parameter count (in the ASL/AML) for an object. + * + ******************************************************************************/ + +void +AcpiNsCheckArgumentCount ( + char *Pathname, + ACPI_NAMESPACE_NODE *Node, + UINT32 UserParamCount, + const ACPI_PREDEFINED_INFO *Predefined) +{ + UINT32 AmlParamCount; + UINT32 RequiredParamCount; + + + if (!Predefined) + { + /* + * Not a predefined name. Check the incoming user argument count + * against the count that is specified in the method/object. + */ + if (Node->Type != ACPI_TYPE_METHOD) + { + if (UserParamCount) + { + ACPI_INFO_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS, + "%u arguments were passed to a non-method ACPI object (%s)", + UserParamCount, AcpiUtGetTypeName (Node->Type))); + } + + return; + } + + /* + * This is a control method. Check the parameter count. + * We can only check the incoming argument count against the + * argument count declared for the method in the ASL/AML. + * + * Emit a message if too few or too many arguments have been passed + * by the caller. + * + * Note: Too many arguments will not cause the method to + * fail. However, the method will fail if there are too few + * arguments and the method attempts to use one of the missing ones. + */ + AmlParamCount = Node->Object->Method.ParamCount; + + if (UserParamCount < AmlParamCount) + { + ACPI_WARN_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "Caller passed %u, method requires %u", + UserParamCount, AmlParamCount)); + } + else if (UserParamCount > AmlParamCount) + { + ACPI_INFO_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS, + "Excess arguments - " + "Caller passed %u, method requires %u", + UserParamCount, AmlParamCount)); + } + + return; + } + + /* + * This is a predefined name. Validate the user-supplied parameter + * count against the ACPI specification. We don't validate against + * the method itself because what is important here is that the + * caller is in conformance with the spec. (The arg count for the + * method was checked against the ACPI spec earlier.) + * + * Some methods are allowed to have a "minimum" number of args (_SCP) + * because their definition in ACPI has changed over time. + */ + RequiredParamCount = METHOD_GET_ARG_COUNT (Predefined->Info.ArgumentList); + + if (UserParamCount < RequiredParamCount) + { + ACPI_WARN_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS, + "Insufficient arguments - " + "Caller passed %u, ACPI requires %u", + UserParamCount, RequiredParamCount)); + } + else if ((UserParamCount > RequiredParamCount) && + !(Predefined->Info.ArgumentList & ARG_COUNT_IS_MINIMUM)) + { + ACPI_INFO_PREDEFINED ((AE_INFO, Pathname, ACPI_WARN_ALWAYS, + "Excess arguments - " + "Caller passed %u, ACPI requires %u", + UserParamCount, RequiredParamCount)); + } +} |
