diff options
Diffstat (limited to 'sys/conf')
-rw-r--r-- | sys/conf/NOTES | 183 |
1 files changed, 0 insertions, 183 deletions
diff --git a/sys/conf/NOTES b/sys/conf/NOTES index f03279a..06af805 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -1049,62 +1049,6 @@ options MSGBUF_SIZE=40960 # Mandatory devices: # -# The keyboard controller; it controls the keyboard and the PS/2 mouse. -device atkbdc -hint.atkbdc.0.at="isa" -hint.atkbdc.0.port="0x060" - -# The AT keyboard -device atkbd -hint.atkbd.0.at="atkbdc" -hint.atkbd.0.irq="1" - -# Options for atkbd: -options ATKBD_DFLT_KEYMAP # specify the built-in keymap -makeoptions ATKBD_DFLT_KEYMAP=jp.106 - -# These options are valid for other keyboard drivers as well. -options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap -options KBD_INSTALL_CDEV # install a CDEV entry in /dev - -# `flags' for atkbd: -# 0x01 Force detection of keyboard, else we always assume a keyboard -# 0x02 Don't reset keyboard, useful for some newer ThinkPads -# 0x03 Force detection and avoid reset, might help with certain -# dockingstations -# 0x04 Old-style (XT) keyboard support, useful for older ThinkPads - -# PS/2 mouse -device psm -hint.psm.0.at="atkbdc" -hint.psm.0.irq="12" - -# Options for psm: -options PSM_HOOKRESUME #hook the system resume event, useful - #for some laptops -options PSM_RESETAFTERSUSPEND #reset the device at the resume event - -# Video card driver for VGA adapters. -device vga -hint.vga.0.at="isa" - -# Options for vga: -# Try the following option if the mouse pointer is not drawn correctly -# or font does not seem to be loaded properly. May cause flicker on -# some systems. -options VGA_ALT_SEQACCESS - -# If you can dispense with some vga driver features, you may want to -# use the following options to save some memory. -#options VGA_NO_FONT_LOADING # don't save/load font -#options VGA_NO_MODE_CHANGE # don't change video modes - -# Older video cards may require this option for proper operation. -options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs - -# The following option probably won't work with the LCD displays. -options VGA_WIDTH90 # support 90 column modes - options FB_DEBUG # Frame buffer debugging device splash # Splash screen and screen saver support @@ -1169,7 +1113,6 @@ options SC_NO_SUSPEND_VTYSWITCH # # adv: All Narrow SCSI bus AdvanSys controllers. # adw: Second Generation AdvanSys controllers including the ADV940UW. -# aha: Adaptec 154x/1535/1640 # ahb: Adaptec 174x EISA controllers # ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/ # 19160x/29160x, aic7770/aic78xx @@ -1177,8 +1120,6 @@ options SC_NO_SUSPEND_VTYSWITCH # aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS) # amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices # such as the Tekram DC-390(T). -# bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x, -# BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F # isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters, # ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2, # ISP 12160 Ultra3 SCSI, @@ -1193,20 +1134,10 @@ options SC_NO_SUSPEND_VTYSWITCH # 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D, # 53C1010-33, 53C1010-66. # trm: Tekram DC395U/UW/F DC315U adapters. -# wds: WD7000 -# -# Note that the order is important in order for Buslogic ISA/EISA cards to be -# probed correctly. -# -device bt -hint.bt.0.at="isa" -hint.bt.0.port="0x330" device adv hint.adv.0.at="isa" device adw -device aha -hint.aha.0.at="isa" device aic hint.aic.0.at="isa" device ahb @@ -1234,11 +1165,6 @@ device mpt device ncr device sym device trm -device wds -hint.wds.0.at="isa" -hint.wds.0.port="0x350" -hint.wds.0.irq="11" -hint.wds.0.drq="6" # The aic7xxx driver will attempt to use memory mapped I/O for all PCI # controllers that have it configured only if this option is set. Unfortunately, @@ -1285,84 +1211,6 @@ options ISP_TARGET_MODE=1 #options SYM_SETUP_MAX_LUN #-Number of LUNs supported # default:8, range:[1..64] -# The 'asr' driver provides support for current DPT/Adaptec SCSI RAID -# controllers (SmartRAID V and VI and later). -# These controllers require the CAM infrastructure. -# -device asr - -# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/). -# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O. -# The DPT controllers are commonly re-licensed under other brand-names - -# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and -# Compaq are actually DPT controllers. -# -# See src/sys/dev/dpt for debugging and other subtle options. -# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various -# instruments are enabled. The tools in -# /usr/sbin/dpt_* assume these to be enabled. -# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT. -# If you ant the driver to handle timeouts, enable -# this option. If your system is very busy, this -# option will create more trouble than solve. -# DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to -# wait when timing out with the above option. -# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h -# DPT_LOST_IRQ When enabled, will try, once per second, to catch -# any interrupt that got lost. Seems to help in some -# DPT-firmware/Motherboard combinations. Minimal -# cost, great benefit. -# DPT_RESET_HBA Make "reset" actually reset the controller -# instead of fudging it. Only enable this if you -# are 100% certain you need it. - -device dpt - -# DPT options -#!CAM# options DPT_MEASURE_PERFORMANCE -#!CAM# options DPT_HANDLE_TIMEOUTS -options DPT_TIMEOUT_FACTOR=4 -options DPT_LOST_IRQ -options DPT_RESET_HBA -options DPT_ALLOW_MEMIO - -# -# Compaq "CISS" RAID controllers (SmartRAID 5* series) -# These controllers have a SCSI-like interface, and require the -# CAM infrastructure. -# -device ciss - -# -# Intel Integrated RAID controllers. -# This driver was developed and is maintained by Intel. Contacts -# at Intel for this driver are -# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and -# "Leubner, Achim" <achim.leubner@intel.com>. -# -device iir - -# -# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later -# firmware. These controllers have a SCSI-like interface, and require -# the CAM infrastructure. -# -device mly - -# -# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only -# one entry is needed; the code will find and configure all supported -# controllers. -# -device ida # Compaq Smart RAID -device mlx # Mylex DAC960 -device amr # AMI MegaRAID - -# -# 3ware ATA RAID -# -device twe # 3ware ATA RAID - # # The 'ATA' driver supports all ATA and ATAPI devices, including PC Card # devices. You only need one "device ata" for it to find all @@ -1908,34 +1756,6 @@ device meteor 1 device bktr # -# PC Card/PCMCIA -# (OLDCARD) -# -# card: pccard slots -# pcic: isa/pccard bridge -#device pcic -#hint.pcic.0.at="isa" -#hint.pcic.1.at="isa" -#device card 1 - -# -# PC Card/PCMCIA and Cardbus -# (NEWCARD) -# -# Note that NEWCARD and OLDCARD are incompatible. Do not use both at the same -# time. -# -# pccbb: pci/cardbus bridge implementing YENTA interface -# pccard: pccard slots -# cardbus: cardbus slots -device cbb -device pccard -device cardbus -#device pcic ISA attachment currently busted -#hint.pcic.0.at="isa" -#hint.pcic.1.at="isa" - -# # SMB bus # # System Management Bus support is provided by the 'smbus' device. @@ -2298,6 +2118,3 @@ options MAXFILES=999 options METEOR_TEST_VIDEO options NDEVFSINO=1025 options NDEVFSOVERFLOW=32769 - -# Yet more undocumented options for linting. -options VGA_DEBUG |