summaryrefslogtreecommitdiffstats
path: root/source/compiler/aslrestype2s.c
diff options
context:
space:
mode:
Diffstat (limited to 'source/compiler/aslrestype2s.c')
-rw-r--r--source/compiler/aslrestype2s.c1187
1 files changed, 1187 insertions, 0 deletions
diff --git a/source/compiler/aslrestype2s.c b/source/compiler/aslrestype2s.c
new file mode 100644
index 0000000..6109aa3
--- /dev/null
+++ b/source/compiler/aslrestype2s.c
@@ -0,0 +1,1187 @@
+/******************************************************************************
+ *
+ * Module Name: aslrestype2s - Serial Large resource descriptors
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include "aslcompiler.h"
+#include "aslcompiler.y.h"
+#include "amlcode.h"
+
+#define _COMPONENT ACPI_COMPILER
+ ACPI_MODULE_NAME ("aslrestype2s")
+
+
+static UINT16
+RsGetBufferDataLength (
+ ACPI_PARSE_OBJECT *InitializerOp);
+
+static UINT16
+RsGetInterruptDataLength (
+ ACPI_PARSE_OBJECT *InitializerOp);
+
+static BOOLEAN
+RsGetVendorData (
+ ACPI_PARSE_OBJECT *InitializerOp,
+ UINT8 *VendorData,
+ ACPI_SIZE DescriptorOffset);
+
+/*
+ * This module contains descriptors for serial buses and GPIO:
+ *
+ * GpioInt
+ * GpioIo
+ * I2cSerialBus
+ * SpiSerialBus
+ * UartSerialBus
+ */
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: RsGetBufferDataLength
+ *
+ * PARAMETERS: InitializerOp - Current parse op, start of the resource
+ * descriptor
+ *
+ * RETURN: Length of the data buffer
+ *
+ * DESCRIPTION: Get the length of a RawDataBuffer, used for vendor data.
+ *
+ ******************************************************************************/
+
+static UINT16
+RsGetBufferDataLength (
+ ACPI_PARSE_OBJECT *InitializerOp)
+{
+ UINT16 ExtraDataSize = 0;
+ ACPI_PARSE_OBJECT *DataList;
+
+
+ /* Find the byte-initializer list */
+
+ while (InitializerOp)
+ {
+ if (InitializerOp->Asl.ParseOpcode == PARSEOP_DATABUFFER)
+ {
+ /* First child is the optional length (ignore it here) */
+
+ DataList = InitializerOp->Asl.Child;
+ DataList = ASL_GET_PEER_NODE (DataList);
+
+ /* Count the data items (each one is a byte of data) */
+
+ while (DataList)
+ {
+ ExtraDataSize++;
+ DataList = ASL_GET_PEER_NODE (DataList);
+ }
+
+ return (ExtraDataSize);
+ }
+
+ InitializerOp = ASL_GET_PEER_NODE (InitializerOp);
+ }
+
+ return (ExtraDataSize);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: RsGetInterruptDataLength
+ *
+ * PARAMETERS: InitializerOp - Current parse op, start of the resource
+ * descriptor
+ *
+ * RETURN: Length of the interrupt data list
+ *
+ * DESCRIPTION: Get the length of a list of interrupt DWORDs for the GPIO
+ * descriptors.
+ *
+ ******************************************************************************/
+
+static UINT16
+RsGetInterruptDataLength (
+ ACPI_PARSE_OBJECT *InitializerOp)
+{
+ UINT16 InterruptLength;
+ UINT32 i;
+
+
+ /* Count the interrupt numbers */
+
+ InterruptLength = 0;
+ for (i = 0; InitializerOp; i++)
+ {
+ InitializerOp = ASL_GET_PEER_NODE (InitializerOp);
+
+ /* Interrupt list starts at offset 10 (Gpio descriptors) */
+
+ if (i >= 10)
+ {
+ InterruptLength += 2;
+ }
+ }
+
+ return (InterruptLength);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: RsGetVendorData
+ *
+ * PARAMETERS: InitializerOp - Current parse op, start of the resource
+ * descriptor.
+ * VendorData - Where the vendor data is returned
+ * DescriptorOffset - Where vendor data begins in descriptor
+ *
+ * RETURN: TRUE if valid vendor data was returned, FALSE otherwise.
+ *
+ * DESCRIPTION: Extract the vendor data and construct a vendor data buffer.
+ *
+ ******************************************************************************/
+
+static BOOLEAN
+RsGetVendorData (
+ ACPI_PARSE_OBJECT *InitializerOp,
+ UINT8 *VendorData,
+ ACPI_SIZE DescriptorOffset)
+{
+ ACPI_PARSE_OBJECT *BufferOp;
+ UINT32 SpecifiedLength = ACPI_UINT32_MAX;
+ UINT16 ActualLength = 0;
+
+
+ /* Vendor Data field is always optional */
+
+ if (InitializerOp->Asl.ParseOpcode == PARSEOP_DEFAULT_ARG)
+ {
+ return (FALSE);
+ }
+
+ BufferOp = InitializerOp->Asl.Child;
+ if (!BufferOp)
+ {
+ AslError (ASL_ERROR, ASL_MSG_SYNTAX, InitializerOp, "");
+ return (FALSE);
+ }
+
+ /* First child is the optional buffer length (WORD) */
+
+ if (BufferOp->Asl.ParseOpcode != PARSEOP_DEFAULT_ARG)
+ {
+ SpecifiedLength = (UINT16) BufferOp->Asl.Value.Integer;
+ }
+
+ /* Insert field tag _VEN */
+
+ RsCreateByteField (InitializerOp, ACPI_RESTAG_VENDORDATA,
+ (UINT16) DescriptorOffset);
+
+ /* Walk the list of buffer initializers (each is one byte) */
+
+ BufferOp = RsCompleteNodeAndGetNext (BufferOp);
+ if (BufferOp->Asl.ParseOpcode != PARSEOP_DEFAULT_ARG)
+ {
+ while (BufferOp)
+ {
+ *VendorData = (UINT8) BufferOp->Asl.Value.Integer;
+ VendorData++;
+ ActualLength++;
+ BufferOp = RsCompleteNodeAndGetNext (BufferOp);
+ }
+ }
+
+ /* Length validation. Buffer cannot be of zero length */
+
+ if ((SpecifiedLength == 0) ||
+ ((SpecifiedLength == ACPI_UINT32_MAX) && (ActualLength == 0)))
+ {
+ AslError (ASL_ERROR, ASL_MSG_BUFFER_LENGTH, InitializerOp, NULL);
+ return (FALSE);
+ }
+
+ if (SpecifiedLength != ACPI_UINT32_MAX)
+ {
+ /* ActualLength > SpecifiedLength -> error */
+
+ if (ActualLength > SpecifiedLength)
+ {
+ AslError (ASL_ERROR, ASL_MSG_LIST_LENGTH_LONG, InitializerOp, NULL);
+ return (FALSE);
+ }
+
+ /* ActualLength < SpecifiedLength -> remark */
+
+ else if (ActualLength < SpecifiedLength)
+ {
+ AslError (ASL_REMARK, ASL_MSG_LIST_LENGTH_SHORT, InitializerOp, NULL);
+ return (FALSE);
+ }
+ }
+
+ return (TRUE);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: RsDoGpioIntDescriptor
+ *
+ * PARAMETERS: Op - Parent resource descriptor parse node
+ * CurrentByteOffset - Offset into the resource template AML
+ * buffer (to track references to the desc)
+ *
+ * RETURN: Completed resource node
+ *
+ * DESCRIPTION: Construct a long "GpioInt" descriptor
+ *
+ ******************************************************************************/
+
+ASL_RESOURCE_NODE *
+RsDoGpioIntDescriptor (
+ ACPI_PARSE_OBJECT *Op,
+ UINT32 CurrentByteOffset)
+{
+ AML_RESOURCE *Descriptor;
+ ACPI_PARSE_OBJECT *InitializerOp;
+ ASL_RESOURCE_NODE *Rnode;
+ char *ResourceSource = NULL;
+ UINT8 *VendorData = NULL;
+ UINT16 *InterruptList = NULL;
+ UINT16 ResSourceLength;
+ UINT16 VendorLength;
+ UINT16 InterruptLength;
+ UINT16 DescriptorSize;
+ UINT32 i;
+
+
+ InitializerOp = Op->Asl.Child;
+
+ /*
+ * Calculate lengths for fields that have variable length:
+ * 1) Resource Source string
+ * 2) Vendor Data buffer
+ * 3) PIN (interrupt) list
+ */
+ ResSourceLength = RsGetStringDataLength (InitializerOp);
+ VendorLength = RsGetBufferDataLength (InitializerOp);
+ InterruptLength = RsGetInterruptDataLength (InitializerOp);
+
+ DescriptorSize = ACPI_AML_SIZE_LARGE (AML_RESOURCE_GPIO) +
+ ResSourceLength + VendorLength + InterruptLength;
+
+ /* Allocate the local resource node and initialize */
+
+ Rnode = RsAllocateResourceNode (DescriptorSize + sizeof (AML_RESOURCE_LARGE_HEADER));
+
+ Descriptor = Rnode->Buffer;
+ Descriptor->Gpio.ResourceLength = DescriptorSize;
+ Descriptor->Gpio.DescriptorType = ACPI_RESOURCE_NAME_GPIO;
+ Descriptor->Gpio.RevisionId = AML_RESOURCE_GPIO_REVISION;
+ Descriptor->Gpio.ConnectionType = AML_RESOURCE_GPIO_TYPE_INT;
+
+ /* Build pointers to optional areas */
+
+ InterruptList = ACPI_ADD_PTR (UINT16, Descriptor, sizeof (AML_RESOURCE_GPIO));
+ ResourceSource = ACPI_ADD_PTR (char, InterruptList, InterruptLength);
+ VendorData = ACPI_ADD_PTR (UINT8, ResourceSource, ResSourceLength);
+
+ /* Setup offsets within the descriptor */
+
+ Descriptor->Gpio.PinTableOffset = (UINT16)
+ ACPI_PTR_DIFF (InterruptList, Descriptor);
+
+ Descriptor->Gpio.ResSourceOffset = (UINT16)
+ ACPI_PTR_DIFF (ResourceSource, Descriptor);
+
+ DbgPrint (ASL_DEBUG_OUTPUT,
+ "%16s - Actual: %.2X, Base: %.2X, ResLen: %.2X, VendLen: %.2X, IntLen: %.2X\n",
+ "GpioInt", Descriptor->Gpio.ResourceLength, (UINT16) sizeof (AML_RESOURCE_GPIO),
+ ResSourceLength, VendorLength, InterruptLength);
+
+ /* Process all child initialization nodes */
+
+ for (i = 0; InitializerOp; i++)
+ {
+ switch (i)
+ {
+ case 0: /* Interrupt Mode - edge/level [Flag] (_MOD) */
+
+ RsSetFlagBits16 (&Descriptor->Gpio.IntFlags, InitializerOp, 0, 0);
+ RsCreateBitField (InitializerOp, ACPI_RESTAG_MODE,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (Gpio.IntFlags), 0);
+ break;
+
+ case 1: /* Interrupt Polarity - Active high/low [Flags] (_POL) */
+
+ RsSetFlagBits16 (&Descriptor->Gpio.IntFlags, InitializerOp, 1, 0);
+ RsCreateMultiBitField (InitializerOp, ACPI_RESTAG_POLARITY,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (Gpio.IntFlags), 1, 2);
+ break;
+
+ case 2: /* Share Type - Default: exclusive (0) [Flags] (_SHR) */
+
+ RsSetFlagBits16 (&Descriptor->Gpio.IntFlags, InitializerOp, 3, 0);
+ RsCreateMultiBitField (InitializerOp, ACPI_RESTAG_INTERRUPTSHARE,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (Gpio.IntFlags), 3, 2);
+ break;
+
+ case 3: /* Pin Config [BYTE] (_PPI) */
+
+ Descriptor->Gpio.PinConfig = (UINT8) InitializerOp->Asl.Value.Integer;
+ RsCreateByteField (InitializerOp, ACPI_RESTAG_PINCONFIG,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (Gpio.PinConfig));
+ break;
+
+ case 4: /* Debounce Timeout [WORD] (_DBT) */
+
+ Descriptor->Gpio.DebounceTimeout = (UINT16) InitializerOp->Asl.Value.Integer;
+ RsCreateWordField (InitializerOp, ACPI_RESTAG_DEBOUNCETIME,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (Gpio.DebounceTimeout));
+ break;
+
+ case 5: /* ResSource [Optional Field - STRING] */
+
+ if (ResSourceLength)
+ {
+ /* Copy string to the descriptor */
+
+ strcpy (ResourceSource,
+ InitializerOp->Asl.Value.String);
+ }
+ break;
+
+ case 6: /* Resource Index */
+
+ if (InitializerOp->Asl.ParseOpcode != PARSEOP_DEFAULT_ARG)
+ {
+ Descriptor->Gpio.ResSourceIndex = (UINT8) InitializerOp->Asl.Value.Integer;
+ }
+ break;
+
+ case 7: /* Resource Usage (consumer/producer) */
+
+ RsSetFlagBits16 (&Descriptor->Gpio.Flags, InitializerOp, 0, 1);
+ break;
+
+ case 8: /* Resource Tag (Descriptor Name) */
+
+ UtAttachNamepathToOwner (Op, InitializerOp);
+ break;
+
+ case 9: /* Vendor Data (Optional - Buffer of BYTEs) (_VEN) */
+
+ /*
+ * Always set the VendorOffset even if there is no Vendor Data.
+ * This field is required in order to calculate the length
+ * of the ResourceSource at runtime.
+ */
+ Descriptor->Gpio.VendorOffset = (UINT16)
+ ACPI_PTR_DIFF (VendorData, Descriptor);
+
+ if (RsGetVendorData (InitializerOp, VendorData,
+ (CurrentByteOffset + Descriptor->Gpio.VendorOffset)))
+ {
+ Descriptor->Gpio.VendorLength = VendorLength;
+ }
+ break;
+
+ default:
+ /*
+ * PINs come through here, repeatedly. Each PIN must be a DWORD.
+ * NOTE: there is no "length" field for this, so from ACPI spec:
+ * The number of pins in the table can be calculated from:
+ * PinCount = (Resource Source Name Offset - Pin Table Offset) / 2
+ * (implies resource source must immediately follow the pin list.)
+ * Name: _PIN
+ */
+ *InterruptList = (UINT16) InitializerOp->Asl.Value.Integer;
+ InterruptList++;
+
+ /* Case 10: First interrupt number in list */
+
+ if (i == 10)
+ {
+ if (InitializerOp->Asl.ParseOpcode == PARSEOP_DEFAULT_ARG)
+ {
+ /* Must be at least one interrupt */
+
+ AslError (ASL_ERROR, ASL_MSG_EX_INTERRUPT_LIST_MIN,
+ InitializerOp, NULL);
+ }
+
+ /* Check now for duplicates in list */
+
+ RsCheckListForDuplicates (InitializerOp);
+
+ /* Create a named field at the start of the list */
+
+ RsCreateDwordField (InitializerOp, ACPI_RESTAG_PIN,
+ CurrentByteOffset + Descriptor->Gpio.PinTableOffset);
+ }
+ break;
+ }
+
+ InitializerOp = RsCompleteNodeAndGetNext (InitializerOp);
+ }
+
+ return (Rnode);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: RsDoGpioIoDescriptor
+ *
+ * PARAMETERS: Op - Parent resource descriptor parse node
+ * CurrentByteOffset - Offset into the resource template AML
+ * buffer (to track references to the desc)
+ *
+ * RETURN: Completed resource node
+ *
+ * DESCRIPTION: Construct a long "GpioIo" descriptor
+ *
+ ******************************************************************************/
+
+ASL_RESOURCE_NODE *
+RsDoGpioIoDescriptor (
+ ACPI_PARSE_OBJECT *Op,
+ UINT32 CurrentByteOffset)
+{
+ AML_RESOURCE *Descriptor;
+ ACPI_PARSE_OBJECT *InitializerOp;
+ ASL_RESOURCE_NODE *Rnode;
+ char *ResourceSource = NULL;
+ UINT8 *VendorData = NULL;
+ UINT16 *InterruptList = NULL;
+ UINT16 ResSourceLength;
+ UINT16 VendorLength;
+ UINT16 InterruptLength;
+ UINT16 DescriptorSize;
+ UINT32 i;
+
+
+ InitializerOp = Op->Asl.Child;
+
+ /*
+ * Calculate lengths for fields that have variable length:
+ * 1) Resource Source string
+ * 2) Vendor Data buffer
+ * 3) PIN (interrupt) list
+ */
+ ResSourceLength = RsGetStringDataLength (InitializerOp);
+ VendorLength = RsGetBufferDataLength (InitializerOp);
+ InterruptLength = RsGetInterruptDataLength (InitializerOp);
+
+ DescriptorSize = ACPI_AML_SIZE_LARGE (AML_RESOURCE_GPIO) +
+ ResSourceLength + VendorLength + InterruptLength;
+
+ /* Allocate the local resource node and initialize */
+
+ Rnode = RsAllocateResourceNode (DescriptorSize + sizeof (AML_RESOURCE_LARGE_HEADER));
+
+ Descriptor = Rnode->Buffer;
+ Descriptor->Gpio.ResourceLength = DescriptorSize;
+ Descriptor->Gpio.DescriptorType = ACPI_RESOURCE_NAME_GPIO;
+ Descriptor->Gpio.RevisionId = AML_RESOURCE_GPIO_REVISION;
+ Descriptor->Gpio.ConnectionType = AML_RESOURCE_GPIO_TYPE_IO;
+
+ /* Build pointers to optional areas */
+
+ InterruptList = ACPI_ADD_PTR (UINT16, Descriptor, sizeof (AML_RESOURCE_GPIO));
+ ResourceSource = ACPI_ADD_PTR (char, InterruptList, InterruptLength);
+ VendorData = ACPI_ADD_PTR (UINT8, ResourceSource, ResSourceLength);
+
+ /* Setup offsets within the descriptor */
+
+ Descriptor->Gpio.PinTableOffset = (UINT16)
+ ACPI_PTR_DIFF (InterruptList, Descriptor);
+
+ Descriptor->Gpio.ResSourceOffset = (UINT16)
+ ACPI_PTR_DIFF (ResourceSource, Descriptor);
+
+ DbgPrint (ASL_DEBUG_OUTPUT,
+ "%16s - Actual: %.2X, Base: %.2X, ResLen: %.2X, VendLen: %.2X, IntLen: %.2X\n",
+ "GpioIo", Descriptor->Gpio.ResourceLength, (UINT16) sizeof (AML_RESOURCE_GPIO),
+ ResSourceLength, VendorLength, InterruptLength);
+
+ /* Process all child initialization nodes */
+
+ for (i = 0; InitializerOp; i++)
+ {
+ switch (i)
+ {
+ case 0: /* Share Type [Flags] (_SHR) */
+
+ RsSetFlagBits16 (&Descriptor->Gpio.IntFlags, InitializerOp, 3, 0);
+ RsCreateBitField (InitializerOp, ACPI_RESTAG_INTERRUPTSHARE,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (Gpio.IntFlags), 3);
+ break;
+
+ case 1: /* Pin Config [BYTE] (_PPI) */
+
+ Descriptor->Gpio.PinConfig = (UINT8) InitializerOp->Asl.Value.Integer;
+ RsCreateByteField (InitializerOp, ACPI_RESTAG_PINCONFIG,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (Gpio.PinConfig));
+ break;
+
+ case 2: /* Debounce Timeout [WORD] (_DBT) */
+
+ Descriptor->Gpio.DebounceTimeout = (UINT16) InitializerOp->Asl.Value.Integer;
+ RsCreateWordField (InitializerOp, ACPI_RESTAG_DEBOUNCETIME,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (Gpio.DebounceTimeout));
+ break;
+
+ case 3: /* Drive Strength [WORD] (_DRS) */
+
+ Descriptor->Gpio.DriveStrength = (UINT16) InitializerOp->Asl.Value.Integer;
+ RsCreateWordField (InitializerOp, ACPI_RESTAG_DRIVESTRENGTH,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (Gpio.DriveStrength));
+ break;
+
+ case 4: /* I/O Restriction [Flag] (_IOR) */
+
+ RsSetFlagBits16 (&Descriptor->Gpio.IntFlags, InitializerOp, 0, 0);
+ RsCreateMultiBitField (InitializerOp, ACPI_RESTAG_IORESTRICTION,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (Gpio.IntFlags), 0, 2);
+ break;
+
+ case 5: /* ResSource [Optional Field - STRING] */
+
+ if (ResSourceLength)
+ {
+ /* Copy string to the descriptor */
+
+ strcpy (ResourceSource,
+ InitializerOp->Asl.Value.String);
+ }
+ break;
+
+ case 6: /* Resource Index */
+
+ if (InitializerOp->Asl.ParseOpcode != PARSEOP_DEFAULT_ARG)
+ {
+ Descriptor->Gpio.ResSourceIndex = (UINT8) InitializerOp->Asl.Value.Integer;
+ }
+ break;
+
+ case 7: /* Resource Usage (consumer/producer) */
+
+ RsSetFlagBits16 (&Descriptor->Gpio.Flags, InitializerOp, 0, 1);
+ break;
+
+ case 8: /* Resource Tag (Descriptor Name) */
+
+ UtAttachNamepathToOwner (Op, InitializerOp);
+ break;
+
+ case 9: /* Vendor Data (Optional - Buffer of BYTEs) (_VEN) */
+
+ /*
+ * Always set the VendorOffset even if there is no Vendor Data.
+ * This field is required in order to calculate the length
+ * of the ResourceSource at runtime.
+ */
+ Descriptor->Gpio.VendorOffset = (UINT16)
+ ACPI_PTR_DIFF (VendorData, Descriptor);
+
+ if (RsGetVendorData (InitializerOp, VendorData,
+ (CurrentByteOffset + Descriptor->Gpio.VendorOffset)))
+ {
+ Descriptor->Gpio.VendorLength = VendorLength;
+ }
+ break;
+
+ default:
+ /*
+ * PINs come through here, repeatedly. Each PIN must be a DWORD.
+ * NOTE: there is no "length" field for this, so from ACPI spec:
+ * The number of pins in the table can be calculated from:
+ * PinCount = (Resource Source Name Offset - Pin Table Offset) / 2
+ * (implies resource source must immediately follow the pin list.)
+ * Name: _PIN
+ */
+ *InterruptList = (UINT16) InitializerOp->Asl.Value.Integer;
+ InterruptList++;
+
+ /* Case 10: First interrupt number in list */
+
+ if (i == 10)
+ {
+ if (InitializerOp->Asl.ParseOpcode == PARSEOP_DEFAULT_ARG)
+ {
+ /* Must be at least one interrupt */
+
+ AslError (ASL_ERROR, ASL_MSG_EX_INTERRUPT_LIST_MIN,
+ InitializerOp, NULL);
+ }
+
+ /* Check now for duplicates in list */
+
+ RsCheckListForDuplicates (InitializerOp);
+
+ /* Create a named field at the start of the list */
+
+ RsCreateDwordField (InitializerOp, ACPI_RESTAG_PIN,
+ CurrentByteOffset + Descriptor->Gpio.PinTableOffset);
+ }
+ break;
+ }
+
+ InitializerOp = RsCompleteNodeAndGetNext (InitializerOp);
+ }
+
+ return (Rnode);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: RsDoI2cSerialBusDescriptor
+ *
+ * PARAMETERS: Op - Parent resource descriptor parse node
+ * CurrentByteOffset - Offset into the resource template AML
+ * buffer (to track references to the desc)
+ *
+ * RETURN: Completed resource node
+ *
+ * DESCRIPTION: Construct a long "I2cSerialBus" descriptor
+ *
+ ******************************************************************************/
+
+ASL_RESOURCE_NODE *
+RsDoI2cSerialBusDescriptor (
+ ACPI_PARSE_OBJECT *Op,
+ UINT32 CurrentByteOffset)
+{
+ AML_RESOURCE *Descriptor;
+ ACPI_PARSE_OBJECT *InitializerOp;
+ ASL_RESOURCE_NODE *Rnode;
+ char *ResourceSource = NULL;
+ UINT8 *VendorData = NULL;
+ UINT16 ResSourceLength;
+ UINT16 VendorLength;
+ UINT16 DescriptorSize;
+ UINT32 i;
+
+
+ InitializerOp = Op->Asl.Child;
+
+ /*
+ * Calculate lengths for fields that have variable length:
+ * 1) Resource Source string
+ * 2) Vendor Data buffer
+ */
+ ResSourceLength = RsGetStringDataLength (InitializerOp);
+ VendorLength = RsGetBufferDataLength (InitializerOp);
+
+ DescriptorSize = ACPI_AML_SIZE_LARGE (AML_RESOURCE_I2C_SERIALBUS) +
+ ResSourceLength + VendorLength;
+
+ /* Allocate the local resource node and initialize */
+
+ Rnode = RsAllocateResourceNode (DescriptorSize + sizeof (AML_RESOURCE_LARGE_HEADER));
+
+ Descriptor = Rnode->Buffer;
+ Descriptor->I2cSerialBus.ResourceLength = DescriptorSize;
+ Descriptor->I2cSerialBus.DescriptorType = ACPI_RESOURCE_NAME_SERIAL_BUS;
+ Descriptor->I2cSerialBus.RevisionId = AML_RESOURCE_I2C_REVISION;
+ Descriptor->I2cSerialBus.TypeRevisionId = AML_RESOURCE_I2C_TYPE_REVISION;
+ Descriptor->I2cSerialBus.Type = AML_RESOURCE_I2C_SERIALBUSTYPE;
+ Descriptor->I2cSerialBus.TypeDataLength = AML_RESOURCE_I2C_MIN_DATA_LEN + VendorLength;
+
+ /* Build pointers to optional areas */
+
+ VendorData = ACPI_ADD_PTR (UINT8, Descriptor, sizeof (AML_RESOURCE_I2C_SERIALBUS));
+ ResourceSource = ACPI_ADD_PTR (char, VendorData, VendorLength);
+
+ DbgPrint (ASL_DEBUG_OUTPUT,
+ "%16s - Actual: %.2X, Base: %.2X, ResLen: %.2X, VendLen: %.2X, TypLen: %.2X\n",
+ "I2cSerialBus", Descriptor->I2cSerialBus.ResourceLength,
+ (UINT16) sizeof (AML_RESOURCE_I2C_SERIALBUS), ResSourceLength,
+ VendorLength, Descriptor->I2cSerialBus.TypeDataLength);
+
+ /* Process all child initialization nodes */
+
+ for (i = 0; InitializerOp; i++)
+ {
+ switch (i)
+ {
+ case 0: /* Slave Address [WORD] (_ADR) */
+
+ Descriptor->I2cSerialBus.SlaveAddress = (UINT16) InitializerOp->Asl.Value.Integer;
+ RsCreateWordField (InitializerOp, ACPI_RESTAG_ADDRESS,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (I2cSerialBus.SlaveAddress));
+ break;
+
+ case 1: /* Slave Mode [Flag] (_SLV) */
+
+ RsSetFlagBits (&Descriptor->I2cSerialBus.Flags, InitializerOp, 0, 0);
+ RsCreateBitField (InitializerOp, ACPI_RESTAG_SLAVEMODE,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (I2cSerialBus.Flags), 0);
+ break;
+
+ case 2: /* Connection Speed [DWORD] (_SPE) */
+
+ Descriptor->I2cSerialBus.ConnectionSpeed = (UINT32) InitializerOp->Asl.Value.Integer;
+ RsCreateDwordField (InitializerOp, ACPI_RESTAG_SPEED,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (I2cSerialBus.ConnectionSpeed));
+ break;
+
+ case 3: /* Addressing Mode [Flag] (_MOD) */
+
+ RsSetFlagBits16 (&Descriptor->I2cSerialBus.TypeSpecificFlags, InitializerOp, 0, 0);
+ RsCreateBitField (InitializerOp, ACPI_RESTAG_MODE,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (I2cSerialBus.TypeSpecificFlags), 0);
+ break;
+
+ case 4: /* ResSource [Optional Field - STRING] */
+
+ if (ResSourceLength)
+ {
+ /* Copy string to the descriptor */
+
+ strcpy (ResourceSource,
+ InitializerOp->Asl.Value.String);
+ }
+ break;
+
+ case 5: /* Resource Index */
+
+ if (InitializerOp->Asl.ParseOpcode != PARSEOP_DEFAULT_ARG)
+ {
+ Descriptor->I2cSerialBus.ResSourceIndex = (UINT8) InitializerOp->Asl.Value.Integer;
+ }
+ break;
+
+ case 6: /* Resource Usage (consumer/producer) */
+
+ RsSetFlagBits (&Descriptor->I2cSerialBus.Flags, InitializerOp, 1, 1);
+ break;
+
+ case 7: /* Resource Tag (Descriptor Name) */
+
+ UtAttachNamepathToOwner (Op, InitializerOp);
+ break;
+
+ case 8: /* Vendor Data (Optional - Buffer of BYTEs) (_VEN) */
+
+ RsGetVendorData (InitializerOp, VendorData,
+ CurrentByteOffset + sizeof (AML_RESOURCE_I2C_SERIALBUS));
+ break;
+
+ default: /* Ignore any extra nodes */
+ break;
+ }
+
+ InitializerOp = RsCompleteNodeAndGetNext (InitializerOp);
+ }
+
+ return (Rnode);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: RsDoSpiSerialBusDescriptor
+ *
+ * PARAMETERS: Op - Parent resource descriptor parse node
+ * CurrentByteOffset - Offset into the resource template AML
+ * buffer (to track references to the desc)
+ *
+ * RETURN: Completed resource node
+ *
+ * DESCRIPTION: Construct a long "SPI Serial Bus" descriptor
+ *
+ ******************************************************************************/
+
+ASL_RESOURCE_NODE *
+RsDoSpiSerialBusDescriptor (
+ ACPI_PARSE_OBJECT *Op,
+ UINT32 CurrentByteOffset)
+{
+ AML_RESOURCE *Descriptor;
+ ACPI_PARSE_OBJECT *InitializerOp;
+ ASL_RESOURCE_NODE *Rnode;
+ char *ResourceSource = NULL;
+ UINT8 *VendorData = NULL;
+ UINT16 ResSourceLength;
+ UINT16 VendorLength;
+ UINT16 DescriptorSize;
+ UINT32 i;
+
+
+ InitializerOp = Op->Asl.Child;
+
+ /*
+ * Calculate lengths for fields that have variable length:
+ * 1) Resource Source string
+ * 2) Vendor Data buffer
+ */
+ ResSourceLength = RsGetStringDataLength (InitializerOp);
+ VendorLength = RsGetBufferDataLength (InitializerOp);
+
+ DescriptorSize = ACPI_AML_SIZE_LARGE (AML_RESOURCE_SPI_SERIALBUS) +
+ ResSourceLength + VendorLength;
+
+ /* Allocate the local resource node and initialize */
+
+ Rnode = RsAllocateResourceNode (DescriptorSize + sizeof (AML_RESOURCE_LARGE_HEADER));
+
+ Descriptor = Rnode->Buffer;
+ Descriptor->SpiSerialBus.ResourceLength = DescriptorSize;
+ Descriptor->SpiSerialBus.DescriptorType = ACPI_RESOURCE_NAME_SERIAL_BUS;
+ Descriptor->SpiSerialBus.RevisionId = AML_RESOURCE_SPI_REVISION;
+ Descriptor->SpiSerialBus.TypeRevisionId = AML_RESOURCE_SPI_TYPE_REVISION;
+ Descriptor->SpiSerialBus.Type = AML_RESOURCE_SPI_SERIALBUSTYPE;
+ Descriptor->SpiSerialBus.TypeDataLength = AML_RESOURCE_SPI_MIN_DATA_LEN + VendorLength;
+
+ /* Build pointers to optional areas */
+
+ VendorData = ACPI_ADD_PTR (UINT8, Descriptor, sizeof (AML_RESOURCE_SPI_SERIALBUS));
+ ResourceSource = ACPI_ADD_PTR (char, VendorData, VendorLength);
+
+ DbgPrint (ASL_DEBUG_OUTPUT,
+ "%16s - Actual: %.2X, Base: %.2X, ResLen: %.2X, VendLen: %.2X, TypLen: %.2X\n",
+ "SpiSerialBus", Descriptor->SpiSerialBus.ResourceLength,
+ (UINT16) sizeof (AML_RESOURCE_SPI_SERIALBUS), ResSourceLength,
+ VendorLength, Descriptor->SpiSerialBus.TypeDataLength);
+
+ /* Process all child initialization nodes */
+
+ for (i = 0; InitializerOp; i++)
+ {
+ switch (i)
+ {
+ case 0: /* Device Selection [WORD] (_ADR) */
+
+ Descriptor->SpiSerialBus.DeviceSelection = (UINT16) InitializerOp->Asl.Value.Integer;
+ RsCreateWordField (InitializerOp, ACPI_RESTAG_ADDRESS,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (SpiSerialBus.DeviceSelection));
+ break;
+
+ case 1: /* Device Polarity [Flag] (_DPL) */
+
+ RsSetFlagBits16 (&Descriptor->SpiSerialBus.TypeSpecificFlags, InitializerOp, 1, 0);
+ RsCreateBitField (InitializerOp, ACPI_RESTAG_DEVICEPOLARITY,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (SpiSerialBus.TypeSpecificFlags), 1);
+ break;
+
+ case 2: /* Wire Mode [Flag] (_MOD) */
+
+ RsSetFlagBits16 (&Descriptor->SpiSerialBus.TypeSpecificFlags, InitializerOp, 0, 0);
+ RsCreateBitField (InitializerOp, ACPI_RESTAG_MODE,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (SpiSerialBus.TypeSpecificFlags), 0);
+ break;
+
+ case 3: /* Device Bit Length [BYTE] (_LEN) */
+
+ Descriptor->SpiSerialBus.DataBitLength = (UINT8) InitializerOp->Asl.Value.Integer;
+ RsCreateByteField (InitializerOp, ACPI_RESTAG_LENGTH,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (SpiSerialBus.DataBitLength));
+ break;
+
+ case 4: /* Slave Mode [Flag] (_SLV) */
+
+ RsSetFlagBits (&Descriptor->SpiSerialBus.Flags, InitializerOp, 0, 0);
+ RsCreateBitField (InitializerOp, ACPI_RESTAG_SLAVEMODE,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (SpiSerialBus.Flags), 0);
+ break;
+
+ case 5: /* Connection Speed [DWORD] (_SPE) */
+
+ Descriptor->SpiSerialBus.ConnectionSpeed = (UINT32) InitializerOp->Asl.Value.Integer;
+ RsCreateDwordField (InitializerOp, ACPI_RESTAG_SPEED,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (SpiSerialBus.ConnectionSpeed));
+ break;
+
+ case 6: /* Clock Polarity [BYTE] (_POL) */
+
+ Descriptor->SpiSerialBus.ClockPolarity = (UINT8) InitializerOp->Asl.Value.Integer;
+ RsCreateByteField (InitializerOp, ACPI_RESTAG_POLARITY,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (SpiSerialBus.ClockPolarity));
+ break;
+
+ case 7: /* Clock Phase [BYTE] (_PHA) */
+
+ Descriptor->SpiSerialBus.ClockPhase = (UINT8) InitializerOp->Asl.Value.Integer;
+ RsCreateByteField (InitializerOp, ACPI_RESTAG_PHASE,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (SpiSerialBus.ClockPhase));
+ break;
+
+ case 8: /* ResSource [Optional Field - STRING] */
+
+ if (ResSourceLength)
+ {
+ /* Copy string to the descriptor */
+
+ strcpy (ResourceSource,
+ InitializerOp->Asl.Value.String);
+ }
+ break;
+
+ case 9: /* Resource Index */
+
+ if (InitializerOp->Asl.ParseOpcode != PARSEOP_DEFAULT_ARG)
+ {
+ Descriptor->SpiSerialBus.ResSourceIndex = (UINT8) InitializerOp->Asl.Value.Integer;
+ }
+ break;
+
+ case 10: /* Resource Usage (consumer/producer) */
+
+ RsSetFlagBits (&Descriptor->SpiSerialBus.Flags, InitializerOp, 1, 1);
+ break;
+
+ case 11: /* Resource Tag (Descriptor Name) */
+
+ UtAttachNamepathToOwner (Op, InitializerOp);
+ break;
+
+ case 12: /* Vendor Data (Optional - Buffer of BYTEs) (_VEN) */
+
+ RsGetVendorData (InitializerOp, VendorData,
+ CurrentByteOffset + sizeof (AML_RESOURCE_SPI_SERIALBUS));
+ break;
+
+ default: /* Ignore any extra nodes */
+ break;
+ }
+
+ InitializerOp = RsCompleteNodeAndGetNext (InitializerOp);
+ }
+
+ return (Rnode);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: RsDoUartSerialBusDescriptor
+ *
+ * PARAMETERS: Op - Parent resource descriptor parse node
+ * CurrentByteOffset - Offset into the resource template AML
+ * buffer (to track references to the desc)
+ *
+ * RETURN: Completed resource node
+ *
+ * DESCRIPTION: Construct a long "UART Serial Bus" descriptor
+ *
+ ******************************************************************************/
+
+ASL_RESOURCE_NODE *
+RsDoUartSerialBusDescriptor (
+ ACPI_PARSE_OBJECT *Op,
+ UINT32 CurrentByteOffset)
+{
+ AML_RESOURCE *Descriptor;
+ ACPI_PARSE_OBJECT *InitializerOp;
+ ASL_RESOURCE_NODE *Rnode;
+ char *ResourceSource = NULL;
+ UINT8 *VendorData = NULL;
+ UINT16 ResSourceLength;
+ UINT16 VendorLength;
+ UINT16 DescriptorSize;
+ UINT32 i;
+
+
+ InitializerOp = Op->Asl.Child;
+
+ /*
+ * Calculate lengths for fields that have variable length:
+ * 1) Resource Source string
+ * 2) Vendor Data buffer
+ */
+ ResSourceLength = RsGetStringDataLength (InitializerOp);
+ VendorLength = RsGetBufferDataLength (InitializerOp);
+
+ DescriptorSize = ACPI_AML_SIZE_LARGE (AML_RESOURCE_UART_SERIALBUS) +
+ ResSourceLength + VendorLength;
+
+ /* Allocate the local resource node and initialize */
+
+ Rnode = RsAllocateResourceNode (DescriptorSize + sizeof (AML_RESOURCE_LARGE_HEADER));
+
+ Descriptor = Rnode->Buffer;
+ Descriptor->UartSerialBus.ResourceLength = DescriptorSize;
+ Descriptor->UartSerialBus.DescriptorType = ACPI_RESOURCE_NAME_SERIAL_BUS;
+ Descriptor->UartSerialBus.RevisionId = AML_RESOURCE_UART_REVISION;
+ Descriptor->UartSerialBus.TypeRevisionId = AML_RESOURCE_UART_TYPE_REVISION;
+ Descriptor->UartSerialBus.Type = AML_RESOURCE_UART_SERIALBUSTYPE;
+ Descriptor->UartSerialBus.TypeDataLength = AML_RESOURCE_UART_MIN_DATA_LEN + VendorLength;
+
+ /* Build pointers to optional areas */
+
+ VendorData = ACPI_ADD_PTR (UINT8, Descriptor, sizeof (AML_RESOURCE_UART_SERIALBUS));
+ ResourceSource = ACPI_ADD_PTR (char, VendorData, VendorLength);
+
+ DbgPrint (ASL_DEBUG_OUTPUT,
+ "%16s - Actual: %.2X, Base: %.2X, ResLen: %.2X, VendLen: %.2X, TypLen: %.2X\n",
+ "UartSerialBus", Descriptor->UartSerialBus.ResourceLength,
+ (UINT16) sizeof (AML_RESOURCE_UART_SERIALBUS), ResSourceLength,
+ VendorLength, Descriptor->UartSerialBus.TypeDataLength);
+
+ /* Process all child initialization nodes */
+
+ for (i = 0; InitializerOp; i++)
+ {
+ switch (i)
+ {
+ case 0: /* Connection Speed (Baud Rate) [DWORD] (_SPE) */
+
+ Descriptor->UartSerialBus.DefaultBaudRate = (UINT32) InitializerOp->Asl.Value.Integer;
+ RsCreateDwordField (InitializerOp, ACPI_RESTAG_SPEED,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (UartSerialBus.DefaultBaudRate));
+ break;
+
+ case 1: /* Bits Per Byte [Flags] (_LEN) */
+
+ RsSetFlagBits16 (&Descriptor->UartSerialBus.TypeSpecificFlags, InitializerOp, 4, 3);
+ RsCreateMultiBitField (InitializerOp, ACPI_RESTAG_LENGTH,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (UartSerialBus.TypeSpecificFlags), 4, 3);
+ break;
+
+ case 2: /* Stop Bits [Flags] (_STB) */
+
+ RsSetFlagBits16 (&Descriptor->UartSerialBus.TypeSpecificFlags, InitializerOp, 2, 1);
+ RsCreateMultiBitField (InitializerOp, ACPI_RESTAG_STOPBITS,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (UartSerialBus.TypeSpecificFlags), 2, 2);
+ break;
+
+ case 3: /* Lines In Use [BYTE] (_LIN) */
+
+ Descriptor->UartSerialBus.LinesEnabled = (UINT8) InitializerOp->Asl.Value.Integer;
+ RsCreateByteField (InitializerOp, ACPI_RESTAG_LINE,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (UartSerialBus.LinesEnabled));
+ break;
+
+ case 4: /* Endianness [Flag] (_END) */
+
+ RsSetFlagBits16 (&Descriptor->UartSerialBus.TypeSpecificFlags, InitializerOp, 7, 0);
+ RsCreateBitField (InitializerOp, ACPI_RESTAG_ENDIANNESS,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (UartSerialBus.TypeSpecificFlags), 7);
+ break;
+
+ case 5: /* Parity [BYTE] (_PAR) */
+
+ Descriptor->UartSerialBus.Parity = (UINT8) InitializerOp->Asl.Value.Integer;
+ RsCreateByteField (InitializerOp, ACPI_RESTAG_PARITY,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (UartSerialBus.Parity));
+ break;
+
+ case 6: /* Flow Control [Flags] (_FLC) */
+
+ RsSetFlagBits16 (&Descriptor->UartSerialBus.TypeSpecificFlags, InitializerOp, 0, 0);
+ RsCreateMultiBitField (InitializerOp, ACPI_RESTAG_FLOWCONTROL,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (UartSerialBus.TypeSpecificFlags), 0, 2);
+ break;
+
+ case 7: /* Rx Buffer Size [WORD] (_RXL) */
+
+ Descriptor->UartSerialBus.RxFifoSize = (UINT16) InitializerOp->Asl.Value.Integer;
+ RsCreateWordField (InitializerOp, ACPI_RESTAG_LENGTH_RX,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (UartSerialBus.RxFifoSize));
+ break;
+
+ case 8: /* Tx Buffer Size [WORD] (_TXL) */
+
+ Descriptor->UartSerialBus.TxFifoSize = (UINT16) InitializerOp->Asl.Value.Integer;
+ RsCreateWordField (InitializerOp, ACPI_RESTAG_LENGTH_TX,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (UartSerialBus.TxFifoSize));
+ break;
+
+ case 9: /* ResSource [Optional Field - STRING] */
+
+ if (ResSourceLength)
+ {
+ /* Copy string to the descriptor */
+
+ strcpy (ResourceSource,
+ InitializerOp->Asl.Value.String);
+ }
+ break;
+
+ case 10: /* Resource Index */
+
+ if (InitializerOp->Asl.ParseOpcode != PARSEOP_DEFAULT_ARG)
+ {
+ Descriptor->UartSerialBus.ResSourceIndex = (UINT8) InitializerOp->Asl.Value.Integer;
+ }
+ break;
+
+ case 11: /* Resource Usage (consumer/producer) */
+
+ RsSetFlagBits (&Descriptor->UartSerialBus.Flags, InitializerOp, 1, 1);
+
+ /*
+ * Slave Mode [Flag] (_SLV)
+ *
+ * Note: There is no SlaveMode argument to the UartSerialBus macro, but
+ * we add this name anyway to allow the flag to be set by ASL in the
+ * rare case where there is a slave mode associated with the UART.
+ */
+ RsCreateBitField (InitializerOp, ACPI_RESTAG_SLAVEMODE,
+ CurrentByteOffset + ASL_RESDESC_OFFSET (UartSerialBus.Flags), 0);
+ break;
+
+ case 12: /* Resource Tag (Descriptor Name) */
+
+ UtAttachNamepathToOwner (Op, InitializerOp);
+ break;
+
+ case 13: /* Vendor Data (Optional - Buffer of BYTEs) (_VEN) */
+
+ RsGetVendorData (InitializerOp, VendorData,
+ CurrentByteOffset + sizeof (AML_RESOURCE_UART_SERIALBUS));
+ break;
+
+ default: /* Ignore any extra nodes */
+ break;
+ }
+
+ InitializerOp = RsCompleteNodeAndGetNext (InitializerOp);
+ }
+
+ return (Rnode);
+}
OpenPOWER on IntegriCloud