diff options
Diffstat (limited to 'share/man/man4/bge.4')
-rw-r--r-- | share/man/man4/bge.4 | 20 |
1 files changed, 11 insertions, 9 deletions
diff --git a/share/man/man4/bge.4 b/share/man/man4/bge.4 index 72ac3ab..dc40d98 100644 --- a/share/man/man4/bge.4 +++ b/share/man/man4/bge.4 @@ -61,17 +61,19 @@ SysKonnect SK-9D41 (1000baseSX) All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5 copper cable, except for the SysKonnect SK-9D41 which supports only 1000Mbps over multimode fiber. -The BCM570x builds upon the technology of the Alteon Tigon II. It has -two R4000 CPU cores and is PCI v2.2 and PCI-X v1.0 compliant. It -supports IP, TCP +The BCM570x builds upon the technology of the Alteon Tigon II. +It has two R4000 CPU cores and is PCI v2.2 and PCI-X v1.0 compliant. +It supports IP, TCP and UDP checksum checksum offload for both receive and transmit, multiple RX and TX DMA rings for QoS applications, rules-based receive filtering, and VLAN tag stripping/insertion as well as -a 256-bit multicast hash filter. Additional features may be +a 256-bit multicast hash filter. +Additional features may be provided via value-add firmware updates. The BCM570x supports TBI (ten bit interface) and GMII transceivers, which means it can be used with either copper of 1000baseX -fiber applications. Note however the device only supports a single +fiber applications. +Note however the device only supports a single speed in TBI mode. .Pp Most cards also use the Broadcom BCM5401 or BCM5411 10/100/1000 @@ -90,7 +92,7 @@ such as file transfers and data streaming. The .Nm driver supports the following media types: -.Bl -tag -width 10baseTXUTP +.Bl -tag -width ".Cm 10baseT/UTP" .It Cm autoselect Enable autoselection of the media type and options. The user can manually override @@ -134,7 +136,7 @@ modes are supported. The .Nm driver supports the following media options: -.Bl -tag -width full-duplex +.Bl -tag -width ".Cm full-duplex" .It Cm full-duplex Force full duplex operation. .It Cm half-duplex @@ -144,7 +146,7 @@ Force half duplex operation. The .Nm driver also supports one special link option for 1000baseTX cards: -.Bl -tag -width link0 +.Bl -tag -width ".Cm link0" .It Cm link0 With 1000baseTX cards, establishing a link between two ports requires that one port be configured as a master and the other a slave. @@ -196,7 +198,7 @@ the network connection (cable). The .Nm device driver first appeared in -.Fx 5.0 . +.Fx 4.5 . .Sh AUTHORS The .Nm |