diff options
Diffstat (limited to 'sbin/fdisk')
-rw-r--r-- | sbin/fdisk/Makefile | 5 | ||||
-rw-r--r-- | sbin/fdisk/fdisk.8 | 78 | ||||
-rw-r--r-- | sbin/fdisk/fdisk.c | 159 |
3 files changed, 100 insertions, 142 deletions
diff --git a/sbin/fdisk/Makefile b/sbin/fdisk/Makefile index 5efa9c5..3e408ca 100644 --- a/sbin/fdisk/Makefile +++ b/sbin/fdisk/Makefile @@ -1,9 +1,6 @@ -# @(#)Makefile 1.1 (Julian Elischer) 3/28/93 -# -# +# $Id: $ PROG= fdisk -SRCS= fdisk.c MAN8= fdisk.8 .include <bsd.prog.mk> diff --git a/sbin/fdisk/fdisk.8 b/sbin/fdisk/fdisk.8 index cd82ed5..b6e0748 100644 --- a/sbin/fdisk/fdisk.8 +++ b/sbin/fdisk/fdisk.8 @@ -1,23 +1,21 @@ +.\" $Id: $ +.\" .Dd October 4, 1996 .Dt FDISK 8 .\".Os BSD 4 .Sh NAME .Nm fdisk -.Nd DOS partition maintenance program +.Nd PC partition table maintenance program .Sh SYNOPSIS .Nm fdisk -.Op Fl i -.Op Fl u -.Op Fl a -.Op Fl b +.Op Fl Baitu +.Op Fl b Ar bootcode .Op Fl 1234 .Op Ar disk .Bl -tag -width time .Nm fdisk -.Op Fl f Ar configfile -.Op Fl i -.Op Fl v -.Op Fl t +.Fl f Ar configfile +.Op Fl itv .Op Ar disk .Sh PROLOGUE In order for the BIOS to boot the kernel, @@ -26,17 +24,15 @@ Sector 0 of the disk must contain boot code, a partition table, and a magic number. BIOS partitions can be used to break the disk up into several pieces. -The BIOS brings in sector 0 -(does it really use the code?) -and verifies the magic number. -It then searches the 4 BIOS partitions described by sector 0 -to determine which of them is +The BIOS brings in sector 0 and verifies the magic number. The sector +0 boot code then searches the partition table to determine which +partition is marked .Em active . -This boot then brings in the secondary boot block from the +This boot code then brings in the bootstrap from the .Em active -partition and runs it. +partition and, if marked bootable, runs it. Under DOS, -you could have one or more partitions with one +you can have one or more partitions with one .Em active . The DOS .Nm @@ -54,32 +50,18 @@ table. The second is used to write a partition table using a and is designed to be used by other scripts/programs. .Pp Options are: -.It Fl u -Is used for updating (editing) sector 0 of the disk. Ignored if -.Fl f -is given. -.It Fl i -Initialize sector 0 of the disk. This implies -.Fl u , -unless +.It Fl B +Reinitialize the boot code contained in sector 0 of the disk. Ignored +if .Fl f is given. .It Fl a Change the active partition only. Ignored if .Fl f is given. -.It Fl b -Reinitialize the boot code contained in sector 0 of the disk. Ignored -if -.Fl f -is given. It should be noted, however, that the standard boot code -written by -.Nm -is suitable for booting only from hard drive 0 (BIOS drive 0x80). -.It Fl 1234 -Operate on a single fdisk entry only. Ignored if -.Fl f -is given. +.It Fl b Ar bootcode +Get the boot code from the file +.Ar bootcode . .It Fl f Ar configfile Set partition values using the file .Ar configfile . @@ -103,17 +85,31 @@ when .Fl f is used, you are not asked if you really want to write the partition table (as you are in the interactive mode). Use with caution! +.It Fl i +Initialize sector 0 of the disk. This implies +.Fl u , +unless +.Fl f +is given. .It Fl t Test mode; do not write partition values. Generally used with the .Fl f option to see what would be written to the partition table. Implies .Fl v . +.It Fl u +Is used for updating (editing) sector 0 of the disk. Ignored if +.Fl f +is given. .It Fl v Be verbose. When .Fl f is used, .Nm prints out the partition table that is written to the disk. +.It Fl 1234 +Operate on a single fdisk entry only. Ignored if +.Fl f +is given. .El .Pp The final disk name can be provided as a @@ -411,9 +407,17 @@ Example: to make partition 1 the active partition: .El .Pp +.Sh FILES +.Bl -tag -width /boot/mbr -compact +.It Pa /boot/mbr +The default boot code +.El .Sh SEE ALSO .Xr disklabel 8 .Sh BUGS +The default boot code will not necessarily handle all partition types +correctly, in particular those introduced since MS-DOS 6.x. +.Pp The entire program should be made more user-friendly. .Pp Throughout this man page, the term diff --git a/sbin/fdisk/fdisk.c b/sbin/fdisk/fdisk.c index eb9354c..f565095 100644 --- a/sbin/fdisk/fdisk.c +++ b/sbin/fdisk/fdisk.c @@ -26,7 +26,7 @@ #ifndef lint static const char rcsid[] = - "$Id: fdisk.c,v 1.27 1998/11/26 12:24:35 joerg Exp $"; + "$Id: fdisk.c,v 1.28 1999/01/22 11:54:17 rnordier Exp $"; #endif /* not lint */ #include <sys/disklabel.h> @@ -117,48 +117,15 @@ typedef struct cmd { } CMD; +static int B_flag = 0; /* replace boot code */ static int a_flag = 0; /* set active partition */ -static int b_flag = 0; /* replace boot code */ +static char *b_flag = NULL; /* path to boot code */ static int i_flag = 0; /* replace partition data */ static int u_flag = 0; /* update partition data */ static int t_flag = 0; /* test only, if f_flag is given */ static char *f_flag = NULL; /* Read config info from file */ static int v_flag = 0; /* Be verbose */ -static unsigned char bootcode[] = { -0x33, 0xc0, 0xfa, 0x8e, 0xd0, 0xbc, 0x00, 0x7c, 0x8e, 0xc0, 0x8e, 0xd8, 0xfb, 0x8b, 0xf4, 0xbf, -0x00, 0x06, 0xb9, 0x00, 0x02, 0xfc, 0xf3, 0xa4, 0xea, 0x1d, 0x06, 0x00, 0x00, 0xb0, 0x04, 0xbe, -0xbe, 0x07, 0x80, 0x3c, 0x80, 0x74, 0x0c, 0x83, 0xc6, 0x10, 0xfe, 0xc8, 0x75, 0xf4, 0xbe, 0xbd, -0x06, 0xeb, 0x43, 0x8b, 0xfe, 0x8b, 0x14, 0x8b, 0x4c, 0x02, 0x83, 0xc6, 0x10, 0xfe, 0xc8, 0x74, -0x0a, 0x80, 0x3c, 0x80, 0x75, 0xf4, 0xbe, 0xbd, 0x06, 0xeb, 0x2b, 0xbd, 0x05, 0x00, 0xbb, 0x00, -0x7c, 0xb8, 0x01, 0x02, 0xcd, 0x13, 0x73, 0x0c, 0x33, 0xc0, 0xcd, 0x13, 0x4d, 0x75, 0xef, 0xbe, -0x9e, 0x06, 0xeb, 0x12, 0x81, 0x3e, 0xfe, 0x7d, 0x55, 0xaa, 0x75, 0x07, 0x8b, 0xf7, 0xea, 0x00, -0x7c, 0x00, 0x00, 0xbe, 0x85, 0x06, 0x2e, 0xac, 0x0a, 0xc0, 0x74, 0x06, 0xb4, 0x0e, 0xcd, 0x10, -0xeb, 0xf4, 0xfb, 0xeb, 0xfe, -'M', 'i', 's', 's', 'i', 'n', 'g', ' ', - 'o', 'p', 'e', 'r', 'a', 't', 'i', 'n', 'g', ' ', 's', 'y', 's', 't', 'e', 'm', 0, -'E', 'r', 'r', 'o', 'r', ' ', 'l', 'o', 'a', 'd', 'i', 'n', 'g', ' ', - 'o', 'p', 'e', 'r', 'a', 't', 'i', 'n', 'g', ' ', 's', 'y', 's', 't', 'e', 'm', 0, -'I', 'n', 'v', 'a', 'l', 'i', 'd', ' ', - 'p', 'a', 'r', 't', 'i', 't', 'i', 'o', 'n', ' ', 't', 'a', 'b', 'l', 'e', 0, -'A', 'u', 't', 'h', 'o', 'r', ' ', '-', ' ', - 'S', 'i', 'e', 'g', 'm', 'a', 'r', ' ', 'S', 'c', 'h', 'm', 'i', 'd', 't', 0,0,0, - - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -}; - struct part_type { unsigned char type; @@ -246,67 +213,49 @@ static int string(char *str, char **ans); int main(int argc, char *argv[]) { - int i; + int c, i; - for ( argv++ ; --argc ; argv++ ) { register char *token = *argv; - if (*token++ != '-' || !*token) + while ((c = getopt(argc, argv, "Bab:f:ituv1234")) != -1) + switch (c) { + case 'B': + B_flag = 1; break; - else { register int flag; - for ( ; (flag = *token++) ; ) { - switch (flag) { - case '1': - partition = 1; - break; - case '2': - partition = 2; - break; - case '3': - partition = 3; - break; - case '4': - partition = 4; - break; - case 'a': - a_flag = 1; - break; - case 'b': - b_flag = 1; - break; - case 'f': - if (*token) - { - f_flag = token; - token = ""; - } - else - { - if (argc == 1) - usage(); - --argc; - f_flag = *++argv; - } - /* - * u_flag is needed, because we're - * writing to the disk. - */ - u_flag = 1; - break; - case 'i': - i_flag = 1; - case 'u': - u_flag = 1; - break; - case 't': - t_flag = 1; - case 'v': - v_flag = 1; - break; - default: - usage(); - } - } + case 'a': + a_flag = 1; + break; + case 'b': + b_flag = optarg; + break; + case 'f': + f_flag = optarg; + break; + case 'i': + i_flag = 1; + break; + case 't': + t_flag = 1; + break; + case 'u': + u_flag = 1; + break; + case 'v': + v_flag = 1; + break; + case '1': + case '2': + case '3': + case '4': + partition = c - '0'; + break; + default: + usage(); } - } + if (f_flag || i_flag) + u_flag = 1; + if (t_flag) + v_flag = 1; + argc -= optind; + argv += optind; if (argc > 0) { @@ -325,7 +274,7 @@ main(int argc, char *argv[]) } else { - int i, rv = 0; + int rv = 0; for(i = 0; disks[i]; i++) { @@ -385,10 +334,10 @@ main(int argc, char *argv[]) if (u_flag || a_flag) change_active(partition); - if (b_flag) + if (B_flag) change_code(); - if (u_flag || a_flag || b_flag) { + if (u_flag || a_flag || B_flag) { if (!t_flag) { printf("\nWe haven't changed the partition table yet. "); @@ -413,8 +362,9 @@ main(int argc, char *argv[]) static void usage() { - fprintf(stderr, - "usage: fdisk {-a|-b|-i|-u} [-f configfile [-t] [-v]] [-{1,2,3,4}] [disk]\n"); + fprintf(stderr, "%s%s", + "usage: fdisk [-Baitu] [-b bootcode] [-1234] [disk]\n", + " fdisk -f configfile [-itv] [disk]\n"); exit(1); } @@ -472,7 +422,14 @@ print_part(int i) static void init_boot(void) { - memcpy(mboot.bootinst, bootcode, sizeof(bootcode)); + const char *fname; + int fd; + + fname = b_flag ? b_flag : "/boot/mbr"; + if ((fd = open(fname, O_RDONLY)) == -1 || + read(fd, mboot.bootinst, DOSPARTOFF) == -1 || + close(fd)) + err(1, "%s", fname); mboot.signature = BOOT_MAGIC; } @@ -666,7 +623,7 @@ struct stat st; if ( !(st.st_mode & S_IFCHR) ) warnx("device %s is not character special", disk); if ((fd = open(disk, - a_flag || b_flag || u_flag ? O_RDWR : O_RDONLY)) == -1) { + a_flag || B_flag || u_flag ? O_RDWR : O_RDONLY)) == -1) { if(errno == ENXIO) return -2; warnx("can't open device %s", disk); |