1 files changed, 0 insertions, 208 deletions
diff --git a/release/netinst.sh b/release/netinst.sh
deleted file mode 100644
index 41e0c90f..0000000
--- a/release/netinst.sh
+++ /dev/null
@@ -1,208 +0,0 @@
-#!/stand/sh
-#
-# netinst.sh - configure the user's network.
-#
-# Written:  November 11th, 1994
-# Copyright (C) 1994 by Jordan K. Hubbard
-#
-# Permission to copy or use this software for any purpose is granted
-# provided that this message stay intact, and at this location (e.g. no
-# putting your name on top after doing something trivial like reindenting
-# it, just to make it look like you wrote it!).
-#
-# $Id: netinst.sh,v 1.16 1994/12/05 00:13:11 ache Exp $
-
-if [ "${_NETINST_SH_LOADED_}" = "yes" ]; then
-	return 0
-else
-	_NETINST_SH_LOADED_=yes
-fi
-
-# Grab the miscellaneous functions.
-. /stand/miscfuncs.sh
-
-network_set_defaults()
-{
-	HOSTNAME=""
-	DOMAIN=""
-	NETMASK="0xffffff00"
-	IPADDR="127.0.0.1"
-	IFCONFIG_FLAGS=""
-	REMOTE_HOSTIP=""
-	REMOTE_IPADDR=""
-	INTERFACE=""
-	SERIAL_INTERFACE="/dev/cuaa0"
-	SERIAL_SPEED="38400"
-}
-
-network_basic_setup()
-{
-	HOSTNAME=""
-	while [ "${HOSTNAME}" = "" ]; do
-		DEFAULT_VALUE=""
-		if ! network_dialog "What is the fully qualified name of this host?"; then return 1; fi
-		if [ "${ANSWER}" = "" ]; then
-			error "You must select a host name!"
-			continue
-		else
-			HOSTNAME=${ANSWER}
-		fi
-	done
-	echo ${HOSTNAME} > ${ETC}/myname
-	${HOSTNAME_CMD} ${HOSTNAME}
-
-	DEFAULT_VALUE=`echo ${HOSTNAME} | sed -e 's/[^.]*\.//' | grep \.`
-	if network_dialog "What is the domain name of this host (Internet, not YP/NIS)?"; then
-		DOMAIN=${ANSWER}
-	fi
-
-	DEFAULT_VALUE=${IPADDR}
-	if ! network_dialog "What is the IP address of this host?"; then return 1; fi
-	IPADDR=${ANSWER}
-       	echo "${IPADDR} ${HOSTNAME} `echo ${HOSTNAME} | sed -e 's/\.${DOMAIN}//'`" >> ${ETC}/hosts
-}
-
-network_setup_ether()
-{
-	dialog  --title "Ethernet Interface Name" --menu \
-	"Please select the type of ethernet interface you have:\n" -1 -1 8 \
-	"ed0" "WD80x3, SMC, Novell NE[21]000 or 3C503 generic NIC at 0x280" \
-	"ed1" "Same as above, but at address 0x300 and IRQ 5" \
-	"ep0" "3COM 3C509 at address 0x300 and IRQ 10" \
-	"de0" "DEC PCI ethernet adapter (or compatible)" \
-	"ie0" "AT&T StarLan and EN100 family at 0x360 and IRQ 7" \
-	"is0" "Isolan 4141-0 or Isolink 4110 at 0x280 and IRQ 7" \
-	"le0" "DEC Etherworks ethernet adapter" \
-	"ze0" "PCMCIA IBM or National card at 0x300 and IRQ 5" \
-	  2> ${TMP}/menu.tmp.$$
-
-	RETVAL=$?
-	INTERFACE=`cat ${TMP}/menu.tmp.$$`
-	rm -f ${TMP}/menu.tmp.$$
-	if ! handle_rval ${RETVAL}; then return 1; fi
-}
-
-network_setup_remote()
-{
-	DEFAULT_VALUE="${REMOTE_IPADDR}"
-	if ! network_dialog "What is the IP number for the remote host?"; then
-		return 1
-	fi
-	REMOTE_IPADDR=${ANSWER}
-}
-
-network_setup_serial()
-{
-	network_setup_remote
-	INTERFACE=$1
-
-	DEFAULT_VALUE=${SERIAL_INTERFACE}
-	if ! network_dialog "What serial port do you wish to use?"; then
-		return 1
-	fi
-	SERIAL_INTERFACE=${ANSWER}
-
-	DEFAULT_VALUE=${SERIAL_SPEED}
-	if ! network_dialog "What speed is the serial connection?"; then
-		return 1
-	fi
-	SERIAL_SPEED=${ANSWER}
-
-	if dialog --title "Dial" --yesno \
-	  "Do you need to dial the phone or otherwise talk to the modem?" \
-	  -1 -1; then
-		mkdir -p /var/log
-		touch -f /var/log/aculog	> /dev/null 2>&1
-		chmod 666 /var/log/aculog	> /dev/null 2>&1
-		confirm \
-"You may now dialog with your modem and set up the connection.
-Be sure to disable DTR sensitivity (usually with AT&D0) or the
-modem may hang up when you exit 'cu'.  Use ~. to exit cu and
-continue."
-		dialog --clear
-		# Grottyness to deal with a weird crunch bug.
-		if [ ! -f /stand/cu ]; then ln /stand/tip /stand/cu; fi
-		/stand/cu -l ${SERIAL_INTERFACE} -s ${SERIAL_SPEED}
-		dialog --clear
-	fi
-}
-
-network_setup_plip()
-{
-	network_setup_remote
-	INTERFACE=lp0
-}
-
-network_setup()
-{
-	DONE=0
-	while [ "${INTERFACE}" = "" ]; do
-		dialog --title "Set up network interface" --menu \
-		  "Please select the type of network connection you have:\n" \
-		  -1 -1 3 \
-		"Ether" "A supported ethernet card" \
-		"SLIP" "A point-to-point SLIP (Serial Line IP) connection" \
-		"PLIP" "A Parallel-Line IP setup (with standard laplink cable)" \
-		2> ${TMP}/menu.tmp.$$
-
-		RETVAL=$?
-		CHOICE=`cat ${TMP}/menu.tmp.$$`
-		rm -f ${TMP}/menu.tmp.$$
-		if ! handle_rval ${RETVAL}; then return 1; fi
-		case ${CHOICE} in
-		Ether)	if ! network_setup_ether; then continue; fi ;;
-		SLIP)	if ! network_setup_serial sl0; then continue; fi ;;
-		PLIP)	if ! network_setup_plip; then continue; fi ;;
-		esac
-		if [ "${INTERFACE}" = "" ]; then continue; fi
-
-		network_basic_setup
-
-		DEFAULT_VALUE="${NETMASK}"
-		if network_dialog "Please specify the netmask"; then
-			if [ "${ANSWER}" != "" ]; then
-				NETMASK=${ANSWER}
-			fi
-		fi
-
-		DEFAULT_VALUE=""
-		if network_dialog "Set extra flags to ${IFCONFIG_CMD}?"; then
-			IFCONFIG_FLAGS=${ANSWER}
-		fi
-		echo "Progress <${IFCONFIG_CMD} ${INTERFACE} ${IPADDR} ${REMOTE_IPADDR} netmask ${NETMASK} ${IFCONFIG_FLAGS}>" >/dev/ttyv1
-		if ! ${IFCONFIG_CMD} ${INTERFACE} ${IPADDR} ${REMOTE_IPADDR} netmask ${NETMASK} ${IFCONFIG_FLAGS} > /dev/ttyv1 2>&1 ; then
-			error "Unable to configure interface ${INTERFACE}"
-			IPADDR=""
-			INTERFACE=""
-			continue
-		fi
-		if [ "${INTERFACE}" = "sl0" ]; then
-			DEFAULT_VALUE=${SLATTACH_FLAGS}
-			if network_dialog "Set extra flags to ${SLATTACH_CMD}?"; then
-				SLATTACH_FLAGS=${ANSWER}
-			fi
-			${SLATTACH_CMD} ${SLATTACH_FLAGS} ${SERIAL_SPEED} ${SERIAL_INTERFACE}
-			progress ${SLATTACH_CMD} ${SLATTACH_FLAGS} ${SERIAL_SPEED} ${SERIAL_INTERFACE}
-		fi
-		echo "${IPADDR} ${REMOTE_IPADDR} netmask ${NETMASK} ${IFCONFIG_FLAGS}" > ${ETC}/hostname.${INTERFACE}
-		DEFAULT_VALUE=""
-		if network_dialog "If you have a default gateway, enter its IP address"; then
-			if [ "${ANSWER}" != "" ]; then
-				GATEWAY=${ANSWER}
-				${ROUTE_CMD} ${ROUTE_FLAGS} ${GATEWAY} > /dev/ttyv1 2>&1
-				progress ${ROUTE_CMD} ${ROUTE_FLAGS} ${GATEWAY}
-				echo ${GATEWAY} > ${ETC}/defaultrouter
-			fi
-		fi
-
-		DEFAULT_VALUE=""
-		if network_dialog "If you have a name server, enter its IP address"; then
-			if [ "${ANSWER}" != "" ]; then
-				NAMESERVER=${ANSWER}
-				echo "domain ${DOMAIN}" > ${ETC}/resolv.conf
-				echo "nameserver ${NAMESERVER}" >> ${ETC}/resolv.conf
-			fi
-		fi
-	done
-	return 0
-}