diff options
Diffstat (limited to 'libexec/bootpd/getether.c')
| -rw-r--r-- | libexec/bootpd/getether.c | 374 |
1 files changed, 374 insertions, 0 deletions
diff --git a/libexec/bootpd/getether.c b/libexec/bootpd/getether.c new file mode 100644 index 0000000..d131b50 --- /dev/null +++ b/libexec/bootpd/getether.c @@ -0,0 +1,374 @@ +/* + * getether.c : get the ethernet address of an interface + * + * All of this code is quite system-specific. As you may well + * guess, it took a good bit of detective work to figure out! + * + * If you figure out how to do this on another system, + * please let me know. <gwr@mc.com> + */ + +#include <sys/types.h> +#include <sys/socket.h> + +#include <ctype.h> +#include <syslog.h> + +#include "report.h" +#define EALEN 6 + +#if defined(ultrix) || (defined(__osf__) && defined(__alpha)) +/* + * This is really easy on Ultrix! Thanks to + * Harald Lundberg <hl@tekla.fi> for this code. + * + * The code here is not specific to the Alpha, but that was the + * only symbol we could find to identify DEC's version of OSF. + * (Perhaps we should just define DEC in the Makefile... -gwr) + */ + +#include <sys/ioctl.h> +#include <net/if.h> /* struct ifdevea */ + +getether(ifname, eap) + char *ifname, *eap; +{ + int rc = -1; + int fd; + struct ifdevea phys; + bzero(&phys, sizeof(phys)); + strcpy(phys.ifr_name, ifname); + if ((fd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { + report(LOG_ERR, "getether: socket(INET,DGRAM) failed"); + return -1; + } + if (ioctl(fd, SIOCRPHYSADDR, &phys) < 0) { + report(LOG_ERR, "getether: ioctl SIOCRPHYSADDR failed"); + } else { + bcopy(&phys.current_pa[0], eap, EALEN); + rc = 0; + } + close(fd); + return rc; +} + +#define GETETHER +#endif /* ultrix|osf1 */ + + +#ifdef SUNOS + +#include <sys/sockio.h> +#include <sys/time.h> /* needed by net_if.h */ +#include <net/nit_if.h> /* for NIOCBIND */ +#include <net/if.h> /* for struct ifreq */ + +getether(ifname, eap) + char *ifname; /* interface name from ifconfig structure */ + char *eap; /* Ether address (output) */ +{ + int rc = -1; + + struct ifreq ifrnit; + int nit; + + bzero((char *) &ifrnit, sizeof(ifrnit)); + strncpy(&ifrnit.ifr_name[0], ifname, IFNAMSIZ); + + nit = open("/dev/nit", 0); + if (nit < 0) { + report(LOG_ERR, "getether: open /dev/nit: %s", + get_errmsg()); + return rc; + } + do { + if (ioctl(nit, NIOCBIND, &ifrnit) < 0) { + report(LOG_ERR, "getether: NIOCBIND on nit"); + break; + } + if (ioctl(nit, SIOCGIFADDR, &ifrnit) < 0) { + report(LOG_ERR, "getether: SIOCGIFADDR on nit"); + break; + } + bcopy(&ifrnit.ifr_addr.sa_data[0], eap, EALEN); + rc = 0; + } while (0); + close(nit); + return rc; +} + +#define GETETHER +#endif /* SUNOS */ + + +#if defined(__386BSD__) || defined(__NetBSD__) +/* Thanks to John Brezak <brezak@ch.hp.com> for this code. */ +#include <sys/ioctl.h> +#include <net/if.h> +#include <net/if_dl.h> +#include <net/if_types.h> + +getether(ifname, eap) + char *ifname; /* interface name from ifconfig structure */ + char *eap; /* Ether address (output) */ +{ + int fd, rc = -1; + register int n; + struct ifreq ibuf[16], ifr; + struct ifconf ifc; + register struct ifreq *ifrp, *ifend; + + /* Fetch the interface configuration */ + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0) { + report(LOG_ERR, "getether: socket %s: %s", ifname, get_errmsg()); + return (fd); + } + ifc.ifc_len = sizeof(ibuf); + ifc.ifc_buf = (caddr_t) ibuf; + if (ioctl(fd, SIOCGIFCONF, (char *) &ifc) < 0 || + ifc.ifc_len < sizeof(struct ifreq)) { + report(LOG_ERR, "getether: SIOCGIFCONF: %s", get_errmsg); + goto out; + } + /* Search interface configuration list for link layer address. */ + ifrp = ibuf; + ifend = (struct ifreq *) ((char *) ibuf + ifc.ifc_len); + while (ifrp < ifend) { + /* Look for interface */ + if (strcmp(ifname, ifrp->ifr_name) == 0 && + ifrp->ifr_addr.sa_family == AF_LINK && + ((struct sockaddr_dl *) &ifrp->ifr_addr)->sdl_type == IFT_ETHER) { + bcopy(LLADDR((struct sockaddr_dl *) &ifrp->ifr_addr), eap, EALEN); + rc = 0; + break; + } + /* Bump interface config pointer */ + n = ifrp->ifr_addr.sa_len + sizeof(ifrp->ifr_name); + if (n < sizeof(*ifrp)) + n = sizeof(*ifrp); + ifrp = (struct ifreq *) ((char *) ifrp + n); + } + + out: + close(fd); + return (rc); +} + +#define GETETHER +#endif /* __NetBSD__ */ + + +#ifdef SVR4 +/* + * This is for "Streams TCP/IP" by Lachman Associates. + * They sure made this cumbersome! -gwr + */ + +#include <sys/sockio.h> +#include <sys/dlpi.h> +#include <stropts.h> +#ifndef NULL +#define NULL 0 +#endif + +getether(ifname, eap) + char *ifname; /* interface name from ifconfig structure */ + char *eap; /* Ether address (output) */ +{ + int rc = -1; + char devname[32]; + char tmpbuf[sizeof(union DL_primitives) + 16]; + struct strbuf cbuf; + int fd, flags; + union DL_primitives *dlp; + char *enaddr; + int unit = -1; /* which unit to attach */ + + sprintf(devname, "/dev/%s", ifname); + fd = open(devname, 2); + if (fd < 0) { + /* Try without the trailing digit. */ + char *p = devname + 5; + while (isalpha(*p)) + p++; + if (isdigit(*p)) { + unit = *p - '0'; + *p = '\0'; + } + fd = open(devname, 2); + if (fd < 0) { + report(LOG_ERR, "getether: open %s: %s", + devname, get_errmsg()); + return rc; + } + } +#ifdef DL_ATTACH_REQ + /* + * If this is a "Style 2" DLPI, then we must "attach" first + * to tell the driver which unit (board, port) we want. + * For now, decide this based on the device name. + * (Should do "info_req" and check dl_provider_style ...) + */ + if (unit >= 0) { + memset(tmpbuf, 0, sizeof(tmpbuf)); + dlp = (union DL_primitives *) tmpbuf; + dlp->dl_primitive = DL_ATTACH_REQ; + dlp->attach_req.dl_ppa = unit; + cbuf.buf = tmpbuf; + cbuf.len = DL_ATTACH_REQ_SIZE; + if (putmsg(fd, &cbuf, NULL, 0) < 0) { + report(LOG_ERR, "getether: attach: putmsg: %s", get_errmsg()); + goto out; + } + /* Recv the ack. */ + cbuf.buf = tmpbuf; + cbuf.maxlen = sizeof(tmpbuf); + flags = 0; + if (getmsg(fd, &cbuf, NULL, &flags) < 0) { + report(LOG_ERR, "getether: attach: getmsg: %s", get_errmsg()); + goto out; + } + /* + * Check the type, etc. + */ + if (dlp->dl_primitive == DL_ERROR_ACK) { + report(LOG_ERR, "getether: attach: dlpi_errno=%d, unix_errno=%d", + dlp->error_ack.dl_errno, + dlp->error_ack.dl_unix_errno); + goto out; + } + if (dlp->dl_primitive != DL_OK_ACK) { + report(LOG_ERR, "getether: attach: not OK or ERROR"); + goto out; + } + } /* unit >= 0 */ +#endif /* DL_ATTACH_REQ */ + + /* + * Get the Ethernet address the same way the ARP module + * does when it is pushed onto a new stream (bind). + * One should instead be able just do an dl_info_req + * but many drivers do not supply the hardware address + * in the response to dl_info_req (they MUST supply it + * for dl_bind_ack because the ARP module requires it). + */ + memset(tmpbuf, 0, sizeof(tmpbuf)); + dlp = (union DL_primitives *) tmpbuf; + dlp->dl_primitive = DL_BIND_REQ; + dlp->bind_req.dl_sap = 0x8FF; /* XXX - Unused SAP */ + cbuf.buf = tmpbuf; + cbuf.len = DL_BIND_REQ_SIZE; + if (putmsg(fd, &cbuf, NULL, 0) < 0) { + report(LOG_ERR, "getether: bind: putmsg: %s", get_errmsg()); + goto out; + } + /* Recv the ack. */ + cbuf.buf = tmpbuf; + cbuf.maxlen = sizeof(tmpbuf); + flags = 0; + if (getmsg(fd, &cbuf, NULL, &flags) < 0) { + report(LOG_ERR, "getether: bind: getmsg: %s", get_errmsg()); + goto out; + } + /* + * Check the type, etc. + */ + if (dlp->dl_primitive == DL_ERROR_ACK) { + report(LOG_ERR, "getether: bind: dlpi_errno=%d, unix_errno=%d", + dlp->error_ack.dl_errno, + dlp->error_ack.dl_unix_errno); + goto out; + } + if (dlp->dl_primitive != DL_BIND_ACK) { + report(LOG_ERR, "getether: bind: not OK or ERROR"); + goto out; + } + if (dlp->bind_ack.dl_addr_offset == 0) { + report(LOG_ERR, "getether: bind: ack has no address"); + goto out; + } + if (dlp->bind_ack.dl_addr_length < EALEN) { + report(LOG_ERR, "getether: bind: ack address truncated"); + goto out; + } + /* + * Copy the Ethernet address out of the message. + */ + enaddr = tmpbuf + dlp->bind_ack.dl_addr_offset; + memcpy(eap, enaddr, EALEN); + rc = 0; + + out: + close(fd); + return rc; +} + +#define GETETHER +#endif /* SVR4 */ + + +#ifdef linux +/* + * This is really easy on Linux! This version (for linux) + * written by Nigel Metheringham <nigelm@ohm.york.ac.uk> + * + * The code is almost identical to the Ultrix code - however + * the names are different to confuse the innocent :-) + * Most of this code was stolen from the Ultrix bit above. + */ + +#include <sys/ioctl.h> +#include <net/if.h> /* struct ifreq */ + +/* In a properly configured system this should be either sys/socketio.h + or sys/sockios.h, but on my distribution these don't line up correctly */ +#include <linux/sockios.h> /* Needed for IOCTL defs */ + +getether(ifname, eap) + char *ifname, *eap; +{ + int rc = -1; + int fd; + struct ifreq phys; + bzero(&phys, sizeof(phys)); + strcpy(phys.ifr_name, ifname); + if ((fd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { + report(LOG_ERR, "getether: socket(INET,DGRAM) failed"); + return -1; + } + if (ioctl(fd, SIOCGIFHWADDR, &phys) < 0) { + report(LOG_ERR, "getether: ioctl SIOCGIFHWADDR failed"); + } else { + bcopy(phys.ifr_hwaddr, eap, EALEN); + rc = 0; + } + close(fd); + return rc; +} + +#define GETETHER +#endif /* linux */ + + +/* If we don't know how on this system, just return an error. */ +#ifndef GETETHER +getether(ifname, eap) + char *ifname, *eap; +{ + return -1; +} + +#endif /* !GETETHER */ + +/* + * Local Variables: + * tab-width: 4 + * c-indent-level: 4 + * c-argdecl-indent: 4 + * c-continued-statement-offset: 4 + * c-continued-brace-offset: -4 + * c-label-offset: -4 + * c-brace-offset: 0 + * End: + */ |
