diff options
Diffstat (limited to 'etc/sysconfig')
| -rw-r--r-- | etc/sysconfig | 340 |
1 files changed, 0 insertions, 340 deletions
diff --git a/etc/sysconfig b/etc/sysconfig deleted file mode 100644 index 8f12741..0000000 --- a/etc/sysconfig +++ /dev/null @@ -1,340 +0,0 @@ -#!/bin/sh -# - -# This is sysconfig - a file full of useful variables that you can set -# to change the default startup behavior of your system. -# -# $Id: sysconfig,v 1.63 1997/04/09 20:15:01 guido Exp $ - -######################### Start Of Local Configuration Section ########### - -# Location of local startup directories. -local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" - -######################### End Of Local Configuration Section ############# - -######################### Start Of Syscons Section ####################### - -# Choose keyboard map from /usr/share/syscons/keymaps/* or NO if default. -keymap=NO - -# Set keyboard rate to: slow, normal, fast or NO if default. -keyrate=NO - -# Change function keys default values (or no change if NO) -# Syntax: "<funkey_number> <new_value> [<funkey_number> <new_value>]..." -keychange=NO - -# Desired cursor type {normal|blink|destructive}, NO if no change -cursor=NO - -# Desired bell type {duration.pitch|normal|visual}, NO if no change -keybell=NO - -# Choose screen map from /usr/share/syscons/scrnmaps/* (or NO for none) -scrnmap=NO - -# Choose font 8x16 from /usr/share/syscons/fonts/* (or NO for default) -font8x16=NO - -# Choose font 8x14 from /usr/share/syscons/fonts/* (or NO for default) -font8x14=NO - -# Choose font 8x8 from /usr/share/syscons/fonts/* (or NO for default) -font8x8=NO - -# Set blank time (in seconds) or "off" to turn it off (or NO for default) -blanktime=NO - -# Set to screen saver desired: blank, green, snake, star (or NO for none) -saver=NO - -# Set to -# {microsoft|mousesystems|mmseries|logitech|busmouse|mouseman|ps/2|mmhittab} -# to activate system mouse cursor support (or NO for none) -# Use 'vidcontrol -m on' command to activate it on particular screen -# -# If you give mousedtype a value, you must use the /dev/sysmouse device -# (or a link to it) and the MouseSystems protocol under X. -mousedtype=NO - -############## Next block activated only if mousedtype != NO ################ - -# Set to your mouse port (required) -# Use real device here, because /dev/mouse usually linked with /dev/sysmouse -mousedport=/dev/cuaa0 - -# Moused options: -# -s: 9600 baud mouse -# -c: enable ChordMiddle -# see moused usage info for complete options list -mousedflags="" - -######################### End of moused block ############################## - -# General Russian setup for example: -# (koi8-r keyboard with cp866 screen font mapped to koi8-r) -# -# keymap=ru.koi8-r -# keyrate=fast -# keychange="61 [K" -# cursor=destructive -# scrnmap=koi8-r2cp866 -# font8x16=cp866b-8x16 -# font8x14=cp866-8x14 -# font8x8=cp866-8x8 -# blanktime=600 -# saver=snake -# mousedtype=mousesystems -# mousedport=/dev/cuaa0 -# mousedflags="" - -######################### End Of Syscons Section ####################### - -######################### Start Of Netconfig Section ####################### - -# Set to the name of your host - this is pretty important! -hostname=myname.my.domain - -# Set to the NIS domainname of your host, or NO if none -defaultdomainname=NO - -# -# Some broken implementations can't handle the RFC 1323 and RFC 1644 -# TCP options. If TCP connections randomly hang, try disabling this, -# and bug the vendor of the losing equipment. -# -tcp_extensions=YES - -# If you're running PCNFSD or anything else which requires mountd to allow -# non-root requests for NFS mounts, set this to YES. -weak_mountd_authentication=NO - -# -# Set to the list of network devices on this host. You must have an -# ifconfig_${network_interface} line for each interface listed here. -# Extra addresses may be specified with sequentual _alias<N> lines. IPX -# addresses may be specified with an ifconfig_${network_interface}_ipx -# line. -# -# for example: -# -# network_interfaces="ed0 sl0 lo0" -# -# ifconfig_ed0="inet 10.0.0.1 netmask 0xffffff00" -# ifconfig_sl0="inet 10.0.1.0 netmask 0xffffff00" -# ifconfig_lo0="inet 127.0.0.1" -# ifconfig_ed0_alias0="inet 10.0.2.1 netmask 0xffffff00" -# ifconfig_ed0_alias1="inet 10.0.2.2 netmask 0xffffffff" -# ifconfig_ed0_ipx="ipx 0x1234" -# -# Alternatively, /etc/start_if.${network_interface} is run if it exists. -# This script can be used as an alternative to the ifconfig_<xxx> lines. -# -network_interfaces="lo0" - -ifconfig_lo0="inet 127.0.0.1" - -# -# Set to the list of route add lines for this host. You must have a -# route_${static_routes} line for each static route listed here (unless -# static_routes is set to "" - do NOT use ``NO'' to denote a lack of static -# routes!). -# -#static_routes="foo multicast" -#route_foo="woofo woofo-gw" -#route_multicast="224.0.0.0 -netmask 0xf0000000 -interface 10.0.0.1" -static_routes="" - -# Set to the host you'd like set as your default router, or NO for none. -# This is the same as adding a ``default'' entry to static_routes. -defaultrouter=NO - -# This is the routing daemon you want to use. Possible options are -# currently NO (for none), `routed' and `gated'. Also see `routerflags' -# for startup flags. -router=routed - -# These are the flags you'd like to start the routing daemon with -routerflags=-q - -# mrouted flags, or NO if you don't want to start mrouted. Needs kernel -# options enabled before it will work. -mrouted=NO - -# YES will switch routing on in the kernel. You need to switch this on -# if this machine has to act as a IPX router. You need to build a -# kernel with IPX support for this to work. -ipxgateway=NO - -# IPXrouted flags. NO if you don't want to start it. Do "man IPXrouted" -# to get more information on the flags. -ipxrouted=NO - -# timed flags, or NO if you don't want to start the time daemon -timedflags=NO - -# portmap flags, or NO if you don't want to start the portmap daemon -portmapflags="" - -# xntpd flags, or NO if you don't want to start the xntpd daemon -xntpdflags="NO" - -# this is inoperative unless xntpd is enabled; NO to disable -tickadjflags="-Aq" - -# Set to the site you'd like to synchronize your clock from (gatekeeper.dec.com, -# for example) or NO for no such site. -ntpdate="NO" - -# Set to YES if you want to run rwhod -rwhod=NO - -# Set to NO if don't want to run lpd -lpd=YES - -# Default sendmail flags. -bd is pretty mandatory, -q<n>m sets the queue scan -# time in minutes. If set to NO, don't start sendmail at all. -sendmail_flags="-bd -q30m" - -# Set to appropriate flags if you want to use AMD. The commented-out entry -# provides a reasonable default, using the sample amd.map config file from the -# /usr/src/etc directory. -amdflags="NO" -#amdflags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map" - -# Set to YES if this machine will be an NFS client -nfs_client=NO - -# Set to YES if this machine will be an NFS server -nfs_server=NO - -# the following option controls if the nfs server will be only allow -# requests from reserved ports. NB: running mountd with -# weak_mountd_authentication=YES will automatically clear this flag. -# See also mountd(8) -nfs_reserved_port_only=NO - -# Set to appropriate flags if you want to start NIS for a client -nis_clientflags="NO" - -# Name of host to ypset to, if no YP server on this wire -nis_ypsetflags="NO" - -# Set to appropriate flags if you want to start NIS for a server -nis_serverflags="NO" - -# Set to appropriate flags for rpc.ypxfrd. This should only be -# run on NIS master servers. -ypxfrdflags="NO" - -# Set to appropriate flags for rpc.yppasswdd. This should only be -# run on NIS master servers. -# Typical flags might be "-t /var/yp/master.passwd -s -f" -yppasswddflags="NO" - -# syslogd flags, or NO if you don't want to start the syslog daemon -syslogdflags="" - -# Set to appropriate flags for named, if you have a full-time -# connection to the Internet. -# For most hosts, flags should be "-b /etc/namedb/named.boot" -namedflags="NO" - -# Set to YES if you want to run the X-10 power controller daemon -xtend=NO - -# Set to the name of the device for kernel crashdumps, or `off' to -# disable any statically configured dumpdev, or NO for no change. -# The device should normally be one of the swap devices specified -# in /etc/fstab. -dumpdev=NO - -# Set to an additional swapfile you'd like to have added to preallocated swap -# space during system boot (or NO for none). -swapfile=NO - -# Set to YES if you want to run Kerberos authentication -kerberos_server=NO - -# If you want this host to be a gateway, set to YES. -gateway=NO - -# If you want this host to be a firewall or otherwise filter IP, set to YES. -firewall=NO - -# Set to YES if you wish to check quotas. -check_quotas=NO - -# Set to YES to turn on accounting. -accounting=NO - -######################### End Of Netconfig Section ####################### - -######################### Start Of PC-card Section ####################### - -# If you want to enable APM BIOS driver, set to YES -# (The APM BIOS driver is not configured into GENERIC kernel b/c of bugs) -apm_enable=NO - -# If you want to use PC-card package, set to YES -# (PC-card support is not configured in the GENERIC kernel) -pccard_enable=NO - -# If you want to specify the address of memory used by PCIC, -# set this address (DEFAULT=0xd0000) -pccard_mem=DEFAULT - -# If you want to use Etnerent PCMCIA cards, specify the ifconfig portion -# here. (card-specific flags like connector selection should be written in -# the card-specific entry in /etc/pccard.conf). Set to DHCP if you want to -# use a DHCP server to determine your IP address. If you want to use DHCP -# please install Wide-DHCP client from ports/packages collection (this -# package requires you to configure and setup BPF (Berkeley Packet Filter) -# in your kernel. -# -# Set to NO if you don't want to configure your PC-CARD ethernet controller. -# -# for example: -# -# pccard_ifconfig="131.113.32.126 netmask 0xffffff00" -# or -# pccard_ifconfig="DHCP" -# -pccard_ifconfig=NO - -######################### End Of PC-card Section ####################### - -######################### Start Of Misc Section ####################### - -# Set to YES if you want ibcs2 (SCO) emulation loaded at startup -ibcs2=NO - -# Set to YES if you want Linux a.out emulation loaded at startup -linux=NO - -# Set to a string representing the interrupts you are going to use -# for generating entropy in the kernel (or NO to ignore). -# If the machine is networked, the Ethernet card IRQ is good. -# The IRQ on an intelligent hard disk controller is good. -# The IRQ's on most sound devices are good. -# -# The following choices are BAD: -# The IRQ's on COM-ports (SIO devices), the IRQ used by a "classic" -# IDE disk or cdrom (Intelligent controllers seem to be OK), and -# the IRQ on the system clock. -# -# Experiment with the rest. The best interrupts are the ones that -# happen fairly irregularly, and never occur in very high-speed bursts. -# -# You'll have it right when you have a good supply of numbers from -# /dev/random, and no problems on your system, like slowdowns, -# Sluggish net/disk activity, perhaps even errors. - -# For example - if you have a sound blaster on IRQ5, an ethernet card -# on IRQ10 and a SCSI controller on IRQ11 (eg ADAPTEC 1542) you might -# try this: -# -# rand_irqs="-s 5 -s 10 -s 11" - -rand_irqs="NO" |
