diff options
Diffstat (limited to 'contrib/ntp/scripts/monitoring/README')
-rw-r--r-- | contrib/ntp/scripts/monitoring/README | 154 |
1 files changed, 154 insertions, 0 deletions
diff --git a/contrib/ntp/scripts/monitoring/README b/contrib/ntp/scripts/monitoring/README new file mode 100644 index 0000000..fa8ad8b --- /dev/null +++ b/contrib/ntp/scripts/monitoring/README @@ -0,0 +1,154 @@ +This directory contains support for monitoring the local clock of xntp daemons. + +WARNING: The scripts and routines contained in this directory are bete realease! + Do not depend on their correct operation. They are, however, in regular + use at University of Erlangen-Nuernberg. No severe problems are known + for this code. + +!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +PLEASE THINK TWICE BEFORE STARTING MONITORING REMOTE XNTP DEAMONS !!!! +MONITORING MAY INCREASE THE LOAD OF THE DEAMON MONITORED AND MAY +INCREASE THE NETWORK LOAD SIGNIFICANTLY +!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + + +Files are: + +README: + This file + +ntptrap: + perl script to log ntp mode 6 trap messages. + + It sends a set_trap request to each server given and dumps the + trap messages received. It handles refresh of set_trap. + Currently it handles only NTP V2, however the NTP V3 servers + also accept v2 requests. It will not interpret v3 system and peer + stati correctly. + + usage: + ntptrap [-n] [-p <port>] [-l <debug-output>] servers... + + -n: do not send set_trap requests + + port: port to listen for responses + useful if you have a configured trap + + debug-output: file to write trace output to (for debugging) + + This script convinced me that ntp trap messages are only of + little use. + +ntploopstat: + perl script to gather loop info statistics from xntpd via mode 7 + LOOP_INFO requests. + + This script collects data to allow monitoring of remote xntp servers + where it is not possible to directly access the loopstats file + produced by xntpd itself. Of course, it can be used to sample + a local server if it is not configured to produce a loopstats file. + + Please note, this program poses a high load on the server as + a communication takes place every delay seconds ! USE WITH CARE ! + + usage: + ntploopstat [-d<delay>] [-t<timeout>] [-l <logfile>] [-v] [ntpserver] + + delay: number of seconds to wait between samples + default: 60 seconds + timeout: number of seconds to wait for reply + default 12 seconds + logfile: file to log samples to + default: loopstats:<ntpserver>: + (note the trailing colon) + This name actually is a prefix. + The file name is dynamically derived by appending + the name of the month the sample belongs to. + Thus all samples of a month end up in the same file. + + the format of the files generated is identical to the format used by + xntpd with the loopstats file: + MJD <seconds since midnight UTC> offset frequency compliance + + if a timeout occurs the next sample is tried after delay/2 seconds + + The script will terminate after MAX_FAIL (currently 60) consecutive errors. + Errors are counted for: + - error on send call + - error on select call + - error on recv call + - short packet received + - bad packet + - error on open for logfile + +ntploopwatch: + perl script to display loop filter statistics collected by ntploopstat + or dumped directly by xntpd. + + Gnuplot is used to produce a graphical representation of the sample + values, that have been preprocessed and analysed by this script. + + It can either be called to produce a printout of specific data set or + used to continously monitor the values. Monitoring is achieved by + periodically reprocessing the logfiles, which are updated regularly + either by a running ntploopstat process or by the running xntpd. + + usage: + to watch statistics permanently: + ntploopwatch [-v[<level>]] [-c <config-file>] [-d <working-dir>] + + to get a single print out specify also + -P<printer> [-s<samples>] + [-S <start-time>] [-E <end-time>] + [-O <MaxOffs>] [-o <MinOffs>] + + level: level of verbosity for debugging + config-file: file to read configurable settings from + On each iteration it is checked and reread + if it has been changed + default: loopwatch.config + working-dir: specify working directory for process, affects + interpretation of relative file names + + All other flags are only useful with printing plots, as otherwise + command line values would be replaced by settings from the config file. + + printer: specify printer to print plot + BSD print systems semantics apply; if printer is omitted + the name "ps" is used; plots are prepared using + PostScript, thus the printer should best accept + postscript input + + For the following see also the comments in loopwatch.config.SAMPLE + + samples: use last # samples from input data + start-time: ignore input samples before this date + end-time: ignore input samples after this date + if both start-time and end-time are specified + a given samples value is ignored + MaxOffs: + MinOffs: restrict value range + +loopwatch.config.SAMPLE: + sample config file for ntploopwatch + each configurable option is explained there + +lr.pl: + linear regression package used by ntploopwatch to compute + linear approximations for frequency and offset values + within display range + +timelocal.pl: + used during conversion of ISO_DATE_TIME values specified in loopwatch + config files to unix epoch values (seconds since 1970-01-01_00:00_00 UTC) + + A version of this file is distributed with perl-4.x, however, + it has a bug related to dates crossing 1970, causing endless loops.. + The version contained here has been fixed. + +ntp.pl: + perl support for ntp v2 mode 6 message handling + WARNING: This code is beta level - it triggers a memory leak; + as for now it is not quite clear, wether this is caused by a + bug in perl or by bad usage of perl within this script. + |