diff options
Diffstat (limited to 'contrib/ntp/ntpd/refclock_datum.c')
-rw-r--r-- | contrib/ntp/ntpd/refclock_datum.c | 873 |
1 files changed, 873 insertions, 0 deletions
diff --git a/contrib/ntp/ntpd/refclock_datum.c b/contrib/ntp/ntpd/refclock_datum.c new file mode 100644 index 0000000..74a37db --- /dev/null +++ b/contrib/ntp/ntpd/refclock_datum.c @@ -0,0 +1,873 @@ +/* +** refclock_datum - clock driver for the Datum Programmable Time Server +** +** Important note: This driver assumes that you have termios. If you have +** a system that does not have termios, you will have to modify this driver. +** +** Sorry, I have only tested this driver on SUN and HP platforms. +*/ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif + +#if defined(REFCLOCK) && defined(CLOCK_DATUM) + +/* +** Include Files +*/ + +#include <stdio.h> +#include <ctype.h> +#include <sys/time.h> + +#include "ntpd.h" +#include "ntp_io.h" +#include "ntp_refclock.h" +#include "ntp_unixtime.h" +#include "ntp_stdlib.h" + +#if defined(HAVE_BSD_TTYS) +#include <sgtty.h> +#endif /* HAVE_BSD_TTYS */ + +#if defined(HAVE_SYSV_TTYS) +#include <termio.h> +#endif /* HAVE_SYSV_TTYS */ + +#if defined(HAVE_TERMIOS) +#include <termios.h> +#endif +#if defined(STREAM) +#include <stropts.h> +#if defined(WWVBCLK) +#include <sys/clkdefs.h> +#endif /* WWVBCLK */ +#endif /* STREAM */ + +#if defined (WWVBPPS) +#include <sys/ppsclock.h> +#endif /* WWVBPPS */ + +#include "ntp_stdlib.h" + +/* +** This driver supports the Datum Programmable Time System (PTS) clock. +** The clock works in very straight forward manner. When it receives a +** time code request (e.g., the ascii string "//k/mn"), it responds with +** a seven byte BCD time code. This clock only responds with a +** time code after it first receives the "//k/mn" message. It does not +** periodically send time codes back at some rate once it is started. +** the returned time code can be broken down into the following fields. +** +** _______________________________ +** Bit Index | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +** =============================== +** byte 0: | - - - - | H D | +** =============================== +** byte 1: | T D | U D | +** =============================== +** byte 2: | - - | T H | U H | +** =============================== +** byte 3: | - | T M | U M | +** =============================== +** byte 4: | - | T S | U S | +** =============================== +** byte 5: | t S | h S | +** =============================== +** byte 6: | m S | - - - - | +** =============================== +** +** In the table above: +** +** "-" means don't care +** "H D", "T D", and "U D" means Hundreds, Tens, and Units of Days +** "T H", and "UH" means Tens and Units of Hours +** "T M", and "U M" means Tens and Units of Minutes +** "T S", and "U S" means Tens and Units of Seconds +** "t S", "h S", and "m S" means tenths, hundredths, and thousandths +** of seconds +** +** The Datum PTS communicates throught the RS232 port on your machine. +** Right now, it assumes that you have termios. This driver has been tested +** on SUN and HP workstations. The Datum PTS supports various IRIG and +** NASA input codes. This driver assumes that the name of the device is +** /dev/datum. You will need to make a soft link to your RS232 device or +** create a new driver to use this refclock. +*/ + +/* +** Datum PTS defines +*/ + +/* +** Note that if GMT is defined, then the Datum PTS must use Greenwich +** time. Otherwise, this driver allows the Datum PTS to use the current +** wall clock for its time. It determines the time zone offset by minimizing +** the error after trying several time zone offsets. If the Datum PTS +** time is Greenwich time and GMT is not defined, everything should still +** work since the time zone will be found to be 0. What this really means +** is that your system time (at least to start with) must be within the +** correct time by less than +- 30 minutes. The default is for GMT to not +** defined. If you really want to force GMT without the funny +- 30 minute +** stuff then you must define (uncomment) GMT below. +*/ + +/* +#define GMT +#define DEBUG_DATUM_PTC +#define LOG_TIME_ERRORS +*/ + + +#define PTSPRECISION (-10) /* precision assumed 1/1024 ms */ +#define DATMREFID "DATM" /* reference id */ +#define DATUM_DISPERSION 0 /* fixed dispersion = 0 ms */ +#define DATUM_MAX_ERROR 0.100 /* limits on sigma squared */ + +#define DATUM_MAX_ERROR2 (DATUM_MAX_ERROR*DATUM_MAX_ERROR) + +/* +** The Datum PTS structure +*/ + +/* +** I don't use a fixed array of MAXUNITS like everyone else just because +** I don't like to program that way. Sorry if this bothers anyone. I assume +** that you can use any id for your unit and I will search for it in a +** dynamic array of units until I find it. I was worried that users might +** enter a bad id in their configuration file (larger than MAXUNITS) and +** besides, it is just cleaner not to have to assume that you have a fixed +** number of anything in a program. +*/ + +struct datum_pts_unit { + struct peer *peer; /* peer used by ntp */ + struct refclockio io; /* io structure used by ntp */ + int PTS_fd; /* file descriptor for PTS */ + u_int unit; /* id for unit */ + u_long timestarted; /* time started */ + l_fp lastrec; /* time tag for the receive time (system) */ + l_fp lastref; /* reference time (Datum time) */ + u_long yearstart; /* the year that this clock started */ + int coderecv; /* number of time codes received */ + int day; /* day */ + int hour; /* hour */ + int minute; /* minutes */ + int second; /* seconds */ + int msec; /* miliseconds */ + int usec; /* miliseconds */ + u_char leap; /* funny leap character code */ + char retbuf[8]; /* returned time from the datum pts */ + char nbytes; /* number of bytes received from datum pts */ + double sigma2; /* average squared error (roughly) */ + int tzoff; /* time zone offest from GMT */ +}; + +/* +** PTS static constant variables for internal use +*/ + +static char TIME_REQUEST[6]; /* request message sent to datum for time */ +static int nunits; /* number of active units */ +static struct datum_pts_unit +**datum_pts_unit; /* dynamic array of datum PTS structures */ + +/* +** Callback function prototypes that ntpd needs to know about. +*/ + +static int datum_pts_start P((int, struct peer *)); +static void datum_pts_shutdown P((int, struct peer *)); +static void datum_pts_poll P((int, struct peer *)); +static void datum_pts_control P((int, struct refclockstat *, + struct refclockstat *, struct peer *)); +static void datum_pts_init P((void)); +static void datum_pts_buginfo P((int, struct refclockbug *, struct peer *)); + +/* +** This is the call back function structure that ntpd actually uses for +** this refclock. +*/ + +struct refclock refclock_datum = { + datum_pts_start, /* start up a new Datum refclock */ + datum_pts_shutdown, /* shutdown a Datum refclock */ + datum_pts_poll, /* sends out the time request */ + datum_pts_control, /* not used */ + datum_pts_init, /* initialization (called first) */ + datum_pts_buginfo, /* not used */ + NOFLAGS /* we are not setting any special flags */ +}; + +/* +** The datum_pts_receive callback function is handled differently from the +** rest. It is passed to the ntpd io data structure. Basically, every +** 64 seconds, the datum_pts_poll() routine is called. It sends out the time +** request message to the Datum Programmable Time System. Then, ntpd +** waits on a select() call to receive data back. The datum_pts_receive() +** function is called as data comes back. We expect a seven byte time +** code to be returned but the datum_pts_receive() function may only get +** a few bytes passed to it at a time. In other words, this routine may +** get called by the io stuff in ntpd a few times before we get all seven +** bytes. Once the last byte is received, we process it and then pass the +** new time measurement to ntpd for updating the system time. For now, +** there is no 3 state filtering done on the time measurements. The +** jitter may be a little high but at least for its current use, it is not +** a problem. We have tried to keep things as simple as possible. This +** clock should not jitter more than 1 or 2 mseconds at the most once +** things settle down. It is important to get the right drift calibrated +** in the ntpd.drift file as well as getting the right tick set up right +** using tickadj for SUNs. Tickadj is not used for the HP but you need to +** remember to bring up the adjtime daemon because HP does not support +** the adjtime() call. +*/ + +static void datum_pts_receive P((struct recvbuf *)); + +/*......................................................................*/ +/* datum_pts_start - start up the datum PTS. This means open the */ +/* RS232 device and set up the data structure for my unit. */ +/*......................................................................*/ + +static int +datum_pts_start( + int unit, + struct peer *peer + ) +{ + struct datum_pts_unit **temp_datum_pts_unit; + struct datum_pts_unit *datum_pts; + +#ifdef HAVE_TERMIOS + struct termios arg; +#endif + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Starting Datum PTS unit %d\n", unit); +#endif + + /* + ** Create the memory for the new unit + */ + + temp_datum_pts_unit = (struct datum_pts_unit **) + malloc((nunits+1)*sizeof(struct datum_pts_unit *)); + if (nunits > 0) memcpy(temp_datum_pts_unit, datum_pts_unit, + nunits*sizeof(struct datum_pts_unit *)); + free(datum_pts_unit); + datum_pts_unit = temp_datum_pts_unit; + datum_pts_unit[nunits] = (struct datum_pts_unit *) + malloc(sizeof(struct datum_pts_unit)); + datum_pts = datum_pts_unit[nunits]; + + datum_pts->unit = unit; /* set my unit id */ + datum_pts->yearstart = 0; /* initialize the yearstart to 0 */ + datum_pts->sigma2 = 0.0; /* initialize the sigma2 to 0 */ + + /* + ** Open the Datum PTS device + */ + + datum_pts->PTS_fd = open("/dev/datum",O_RDWR); + + fcntl(datum_pts->PTS_fd, F_SETFL, 0); /* clear the descriptor flags */ + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Opening RS232 port with file descriptor %d\n", + datum_pts->PTS_fd); +#endif + + /* + ** Set up the RS232 terminal device information. Note that we assume that + ** we have termios. This code has only been tested on SUNs and HPs. If your + ** machine does not have termios this driver cannot be initialized. You can change this + ** if you want by editing this source. Please give the changes back to the + ** ntp folks so that it can become part of their regular distribution. + */ + +#ifdef HAVE_TERMIOS + + arg.c_iflag = IGNBRK; + arg.c_oflag = 0; + arg.c_cflag = B9600 | CS8 | CREAD | PARENB | CLOCAL; + arg.c_lflag = 0; + arg.c_cc[VMIN] = 0; /* start timeout timer right away (not used) */ + arg.c_cc[VTIME] = 30; /* 3 second timout on reads (not used) */ + + tcsetattr(datum_pts->PTS_fd, TCSANOW, &arg); + +#else + + msyslog(LOG_ERR, "Datum_PTS: Termios not supported in this driver"); + (void)close(datum_pts->PTS_fd); + + return 0; + +#endif + + /* + ** Initialize the ntpd IO structure + */ + + datum_pts->peer = peer; + datum_pts->io.clock_recv = datum_pts_receive; + datum_pts->io.srcclock = (caddr_t)datum_pts; + datum_pts->io.datalen = 0; + datum_pts->io.fd = datum_pts->PTS_fd; + + if (!io_addclock(&(datum_pts->io))) { + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Problem adding clock\n"); +#endif + + msyslog(LOG_ERR, "Datum_PTS: Problem adding clock"); + (void)close(datum_pts->PTS_fd); + + return 0; + } + + peer->precision = PTSPRECISION; + peer->stratum = 0; + memcpy((char *)&peer->refid, DATMREFID, 4); + + /* + ** Now add one to the number of units and return a successful code + */ + + nunits++; + return 1; + +} + + +/*......................................................................*/ +/* datum_pts_shutdown - this routine shuts doen the device and */ +/* removes the memory for the unit. */ +/*......................................................................*/ + +static void +datum_pts_shutdown( + int unit, + struct peer *peer + ) +{ + int i,j; + struct datum_pts_unit **temp_datum_pts_unit; + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Shutdown Datum PTS\n"); +#endif + + msyslog(LOG_ERR, "Datum_PTS: Shutdown Datum PTS"); + + /* + ** First we have to find the right unit (i.e., the one with the same id). + ** We do this by looping through the dynamic array of units intil we find + ** it. Note, that I don't simply use an array with a maximimum number of + ** Datum PTS units. Everything is completely dynamic. + */ + + for (i=0; i<nunits; i++) { + if (datum_pts_unit[i]->unit == unit) { + + /* + ** We found the unit so close the file descriptor and free up the memory used + ** by the structure. + */ + + io_closeclock(&datum_pts_unit[i]->io); + close(datum_pts_unit[i]->PTS_fd); + free(datum_pts_unit[i]); + + /* + ** Now clean up the datum_pts_unit dynamic array so that there are no holes. + ** This may mean moving pointers around, etc., to keep things compact. + */ + + if (nunits > 1) { + + temp_datum_pts_unit = (struct datum_pts_unit **) + malloc((nunits-1)*sizeof(struct datum_pts_unit *)); + if (i!= 0) memcpy(temp_datum_pts_unit, datum_pts_unit, + i*sizeof(struct datum_pts_unit *)); + + for (j=i+1; j<nunits; j++) { + temp_datum_pts_unit[j-1] = datum_pts_unit[j]; + } + + free(datum_pts_unit); + datum_pts_unit = temp_datum_pts_unit; + + }else{ + + free(datum_pts_unit); + datum_pts_unit = NULL; + + } + + return; + + } + } + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Error, could not shut down unit %d\n",unit); +#endif + + msyslog(LOG_ERR, "Datum_PTS: Could not shut down Datum PTS unit %d",unit); + +} + +/*......................................................................*/ +/* datum_pts_poll - this routine sends out the time request to the */ +/* Datum PTS device. The time will be passed back in the */ +/* datum_pts_receive() routine. */ +/*......................................................................*/ + +static void +datum_pts_poll( + int unit, + struct peer *peer + ) +{ + int i; + int index; + int error_code; + struct datum_pts_unit *datum_pts; + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Poll Datum PTS\n"); +#endif + + /* + ** Find the right unit and send out a time request once it is found. + */ + + index = -1; + for (i=0; i<nunits; i++) { + if (datum_pts_unit[i]->unit == unit) { + index = i; + datum_pts = datum_pts_unit[i]; + error_code = write(datum_pts->PTS_fd, TIME_REQUEST, 6); + if (error_code != 6) perror("TIME_REQUEST"); + datum_pts->nbytes = 0; + break; + } + } + + /* + ** Print out an error message if we could not find the right unit. + */ + + if (index == -1) { + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Error, could not poll unit %d\n",unit); +#endif + + msyslog(LOG_ERR, "Datum_PTS: Could not poll unit %d",unit); + return; + + } + +} + + +/*......................................................................*/ +/* datum_pts_control - not used */ +/*......................................................................*/ + +static void +datum_pts_control( + int unit, + struct refclockstat *in, + struct refclockstat *out, + struct peer *peer + ) +{ + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Control Datum PTS\n"); +#endif + +} + + +/*......................................................................*/ +/* datum_pts_init - initializes things for all possible Datum */ +/* time code generators that might be used. In practice, this is */ +/* only called once at the beginning before anything else is */ +/* called. */ +/*......................................................................*/ + +static void +datum_pts_init(void) +{ + + /* */ + /*...... open up the log file if we are debugging ......................*/ + /* */ + + /* + ** Open up the log file if we are debugging. For now, send data out to the + ** screen (stdout). + */ + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Init Datum PTS\n"); +#endif + + /* + ** Initialize the time request command string. This is the only message + ** that we ever have to send to the Datum PTS (although others are defined). + */ + + memcpy(TIME_REQUEST, "//k/mn",6); + + /* + ** Initialize the number of units to 0 and set the dynamic array of units to + ** NULL since there are no units defined yet. + */ + + datum_pts_unit = NULL; + nunits = 0; + +} + + +/*......................................................................*/ +/* datum_pts_buginfo - not used */ +/*......................................................................*/ + +static void +datum_pts_buginfo( + int unit, + register struct refclockbug *bug, + register struct peer *peer + ) +{ + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Buginfo Datum PTS\n"); +#endif + +} + + +/*......................................................................*/ +/* datum_pts_receive - receive the time buffer that was read in */ +/* by the ntpd io handling routines. When 7 bytes have been */ +/* received (it may take several tries before all 7 bytes are */ +/* received), then the time code must be unpacked and sent to */ +/* the ntpd clock_receive() routine which causes the systems */ +/* clock to be updated (several layers down). */ +/*......................................................................*/ + +static void +datum_pts_receive( + struct recvbuf *rbufp + ) +{ + int i; + l_fp tstmp; + struct datum_pts_unit *datum_pts; + char *dpt; + int dpend; + int tzoff; + int timerr; + double ftimerr, abserr; +#ifdef DEBUG_DATUM_PTC + double dispersion; +#endif + int goodtime; + /*double doffset;*/ + + /* + ** Get the time code (maybe partial) message out of the rbufp buffer. + */ + + datum_pts = (struct datum_pts_unit *)rbufp->recv_srcclock; + dpt = (char *)&rbufp->recv_space; + dpend = rbufp->recv_length; + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Receive Datum PTS: %d bytes\n", dpend); +#endif + + /* */ + /*...... save the ntp system time when the first byte is received ......*/ + /* */ + + /* + ** Save the ntp system time when the first byte is received. Note that + ** because it may take several calls to this routine before all seven + ** bytes of our return message are finally received by the io handlers in + ** ntpd, we really do want to use the time tag when the first byte is + ** received to reduce the jitter. + */ + + if (datum_pts->nbytes == 0) { + datum_pts->lastrec = rbufp->recv_time; + } + + /* + ** Increment our count to the number of bytes received so far. Return if we + ** haven't gotten all seven bytes yet. + */ + + for (i=0; i<dpend; i++) { + datum_pts->retbuf[datum_pts->nbytes+i] = dpt[i]; + } + + datum_pts->nbytes += dpend; + + if (datum_pts->nbytes != 7) { + return; + } + + /* + ** Convert the seven bytes received in our time buffer to day, hour, minute, + ** second, and msecond values. The usec value is not used for anything + ** currently. It is just the fractional part of the time stored in units + ** of microseconds. + */ + + datum_pts->day = 100*(datum_pts->retbuf[0] & 0x0f) + + 10*((datum_pts->retbuf[1] & 0xf0)>>4) + + (datum_pts->retbuf[1] & 0x0f); + + datum_pts->hour = 10*((datum_pts->retbuf[2] & 0x30)>>4) + + (datum_pts->retbuf[2] & 0x0f); + + datum_pts->minute = 10*((datum_pts->retbuf[3] & 0x70)>>4) + + (datum_pts->retbuf[3] & 0x0f); + + datum_pts->second = 10*((datum_pts->retbuf[4] & 0x70)>>4) + + (datum_pts->retbuf[4] & 0x0f); + + datum_pts->msec = 100*((datum_pts->retbuf[5] & 0xf0) >> 4) + + 10*(datum_pts->retbuf[5] & 0x0f) + + ((datum_pts->retbuf[6] & 0xf0)>>4); + + datum_pts->usec = 1000*datum_pts->msec; + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("day %d, hour %d, minute %d, second %d, msec %d\n", + datum_pts->day, + datum_pts->hour, + datum_pts->minute, + datum_pts->second, + datum_pts->msec); +#endif + + /* + ** Get the GMT time zone offset. Note that GMT should be zero if the Datum + ** reference time is using GMT as its time base. Otherwise we have to + ** determine the offset if the Datum PTS is using time of day as its time + ** base. + */ + + goodtime = 0; /* We are not sure about the time and offset yet */ + +#ifdef GMT + + /* + ** This is the case where the Datum PTS is using GMT so there is no time + ** zone offset. + */ + + tzoff = 0; /* set time zone offset to 0 */ + +#else + + /* + ** This is the case where the Datum PTS is using regular time of day for its + ** time so we must compute the time zone offset. The way we do it is kind of + ** funny but it works. We loop through different time zones (0 to 24) and + ** pick the one that gives the smallest error (+- one half hour). The time + ** zone offset is stored in the datum_pts structure for future use. Normally, + ** the clocktime() routine is only called once (unless the time zone offset + ** changes due to daylight savings) since the goodtime flag is set when a + ** good time is found (with a good offset). Note that even if the Datum + ** PTS is using GMT, this mechanism will still work since it should come up + ** with a value for tzoff = 0 (assuming that your system clock is within + ** a half hour of the Datum time (even with time zone differences). + */ + + for (tzoff=0; tzoff<24; tzoff++) { + if (clocktime( datum_pts->day, + datum_pts->hour, + datum_pts->minute, + datum_pts->second, + (tzoff + datum_pts->tzoff) % 24, + datum_pts->lastrec.l_ui, + &datum_pts->yearstart, + &datum_pts->lastref.l_ui) ) { + + error = datum_pts->lastref.l_ui - datum_pts->lastrec.l_ui; + +#ifdef DEBUG_DATUM_PTC + printf("Time Zone (clocktime method) = %d, error = %d\n", tzoff, error); +#endif + + if ((error < 1799) && (error > -1799)) { + tzoff = (tzoff + datum_pts->tzoff) % 24; + datum_pts->tzoff = tzoff; + goodtime = 1; + +#ifdef DEBUG_DATUM_PTC + printf("Time Zone found (clocktime method) = %d\n",tzoff); +#endif + + break; + } + + } + } + +#endif + + /* + ** Make sure that we have a good time from the Datum PTS. Clocktime() also + ** sets yearstart and lastref.l_ui. We will have to set astref.l_uf (i.e., + ** the fraction of a second) stuff later. + */ + + if (!goodtime) { + + if (!clocktime( datum_pts->day, + datum_pts->hour, + datum_pts->minute, + datum_pts->second, + tzoff, + datum_pts->lastrec.l_ui, + &datum_pts->yearstart, + &datum_pts->lastref.l_ui) ) { + +#ifdef DEBUG_DATUM_PTC + if (debug) + { + printf("Error: bad clocktime\n"); + printf("GMT %d, lastrec %d, yearstart %d, lastref %d\n", + tzoff, + datum_pts->lastrec.l_ui, + datum_pts->yearstart, + datum_pts->lastref.l_ui); + } +#endif + + msyslog(LOG_ERR, "Datum_PTS: Bad clocktime"); + + return; + + }else{ + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Good clocktime\n"); +#endif + + } + + } + + /* + ** We have datum_pts->lastref.l_ui set (which is the integer part of the + ** time. Now set the microseconds field. + */ + + TVUTOTSF(datum_pts->usec, datum_pts->lastref.l_uf); + + /* + ** Compute the time correction as the difference between the reference + ** time (i.e., the Datum time) minus the receive time (system time). + */ + + tstmp = datum_pts->lastref; /* tstmp is the datum ntp time */ + L_SUB(&tstmp, &datum_pts->lastrec); /* tstmp is now the correction */ + datum_pts->coderecv++; /* increment a counter */ + +#ifdef DEBUG_DATUM_PTC + dispersion = DATUM_DISPERSION; /* set the dispersion to 0 */ + ftimerr = dispersion; + ftimerr /= (1024.0 * 64.0); + if (debug) + printf("dispersion = %d, %f\n", dispersion, ftimerr); +#endif + + /* + ** Pass the new time to ntpd through the refclock_receive function. Note + ** that we are not trying to make any corrections due to the time it takes + ** for the Datum PTS to send the message back. I am (erroneously) assuming + ** that the time for the Datum PTS to send the time back to us is negligable. + ** I suspect that this time delay may be as much as 15 ms or so (but probably + ** less). For our needs at JPL, this kind of error is ok so it is not + ** necessary to use fudge factors in the ntp.conf file. Maybe later we will. + */ + /*LFPTOD(&tstmp, doffset);*/ + refclock_receive(datum_pts->peer); + + /* + ** Compute sigma squared (not used currently). Maybe later, this could be + ** used for the dispersion estimate. The problem is that ntpd does not link + ** in the math library so sqrt() is not available. Anyway, this is useful + ** for debugging. Maybe later I will just use absolute values for the time + ** error to come up with my dispersion estimate. Anyway, for now my dispersion + ** is set to 0. + */ + + timerr = tstmp.l_ui<<20; + timerr |= (tstmp.l_uf>>12) & 0x000fffff; + ftimerr = timerr; + ftimerr /= 1024*1024; + abserr = ftimerr; + if (ftimerr < 0.0) abserr = -ftimerr; + + if (datum_pts->sigma2 == 0.0) { + if (abserr < DATUM_MAX_ERROR) { + datum_pts->sigma2 = abserr*abserr; + }else{ + datum_pts->sigma2 = DATUM_MAX_ERROR2; + } + }else{ + if (abserr < DATUM_MAX_ERROR) { + datum_pts->sigma2 = 0.95*datum_pts->sigma2 + 0.05*abserr*abserr; + }else{ + datum_pts->sigma2 = 0.95*datum_pts->sigma2 + 0.05*DATUM_MAX_ERROR2; + } + } + +#ifdef DEBUG_DATUM_PTC + if (debug) + printf("Time error = %f seconds\n", ftimerr); +#endif + +#if defined(DEBUG_DATUM_PTC) || defined(LOG_TIME_ERRORS) + if (debug) + printf("PTS: day %d, hour %d, minute %d, second %d, msec %d, Time Error %f\n", + datum_pts->day, + datum_pts->hour, + datum_pts->minute, + datum_pts->second, + datum_pts->msec, + ftimerr); +#endif + +} +#else +int refclock_datum_bs; +#endif /* REFCLOCK */ |