diff options
Diffstat (limited to 'contrib/ntp/html/hints/parse')
-rw-r--r-- | contrib/ntp/html/hints/parse | 105 |
1 files changed, 105 insertions, 0 deletions
diff --git a/contrib/ntp/html/hints/parse b/contrib/ntp/html/hints/parse new file mode 100644 index 0000000..d252351 --- /dev/null +++ b/contrib/ntp/html/hints/parse @@ -0,0 +1,105 @@ +Compilation: + Usual thing: rm -f Config.local ; make for vanilla + make refconf for reference clock (e. g. DCF77) + +Directory contents: + + hints/PARSE - this file + + xntpd/refclock_parse.c + - reference clock support for DCF77/GPS in xntp + parse/parse.c + - Reference clock data parser framework + parse/parse_conf.c + - parser configuration (clock types) + parse/clk_meinberg.c + - Meinberg clock formats (DCF U/A 31, PZF 535, GPS166) + parse/clk_schmid.c + - Schmid receiver (DCF77) + parse/clk_rawdcf.c + - 100/200ms pulses via 50 Baud line (DCF77) + parse/clk_dcf7000.c + - ELV DCF7000 (DCF77) + parse/clk_trimble.c + - Trimble SV6 GPS receiver + + If you want to add new clock types please check + with kardel@informatik.uni-erlangen.de. These files + implement the conversion of RS232 data streams into + timing information used by refclock_parse.c which is + mostly generic except for NTP configuration constants. + + parse/Makefile.kernel + - *SIMPLE* makefile to build a loadable STREAMS + module for SunOS 4.x / SunOS 5.x systems + + parse/parsestreams.c + - SUN Streams module (loadable) for radio clocks + This streams module is designed for SunOS 4.1.X. + + parse/parsesolaris.c + - SUN Streams module (loadable) for radio clocks. + This streams module is designed for SunOS 5.x + Beware this is still new - so it might crash + your machine (we have seen it working, though). + + parse/parsetest.c + - simple test program for STREAMS module. Its so simple, + that it doesn't even set TTY-modes, thus they got to + be correct on startup - works for Meinberg receivers + + parse/testdcf.c + - test program for raw DCF77 (100/200ms pulses) + receivers + + include/parse.h - interface to "parse" module and more + include/parse_conf.h + - interface to "parse" configuration + + include/sys/parsestreams.h + - STREAMS specific definitions + + scripts/support + - scripts (perl & sh) for statistics and rc startup + the startup scripts are used in Erlangen for + starting the daemon on a variety of Suns and HPs + and for Reference Clock startup on Suns + These scripts may or may not be helpful to you. + +Supported clocks: + Meinberg DCF U/A 31 + Meinberg PZF535/TCXO (Software revision PZFUERL 4.6) + Meinberg PZF535/OCXO (Software revision PZFUERL 4.6) + Meinberg GPS166 (Software version for Uni-Erlangen) + ELV DCF7000 (not recommended - casual/emergency use only) + Conrad DCF77 receiver (email: time@informatik.uni-erlangen.de) + + level converter + TimeBrick (email: time@informatik.uni-erlangen.de) + Schmid Receiver Kit + Trimble SV6 GPS receiver + +Addresses: + Meinberg Funkuhren + Auf der Landwehr 22 + 31812 Bad Pyrmont + Germany + Tel.: 05281/20 18 + FAX: 05281/60 81 80 + + ELV Kundenservice + Postfach 1000 + 26787 Leer + Germany + Tel.: 0491/60 08 88 + + Walter Schmidt + Eichwisrain 14 + 8634 Hombrechtikon + Switzerland + +If you have problems mail to: + + time@informatik.uni-erlangen.de + +We'll help (conditions permitting) + |